Solenoid Pilot Operated Directional Control Valve
|
|
- Francis Richard
- 5 years ago
- Views:
Transcription
1 Solenoid ilot Operted Directionl Control Vlve Nomenclture 1 pplicle fluid code No designtion: etroleum-sed hydrulic fluid H: Wter-glycol hydrulic fluid F: hosphte ester hydrulic fluid 2 3 Model No. ME: Solenoid pilot operted directionl control vlve dimeter 12: ½ 16: ¾ 20: 1 25: 1¼ 32: 1½ Fetures Using these vlves in comintion with pressure compenstion vlve (MUV, MDM) chieves flow rte chrcteristics with pressure compenstion ccording to the djustment mde with the flow rte djusting screw. his model provide the shock reduction function of solenoid pilot operted directionl control vlves y themselves. Even greter shock reduction performnce cn e relized y inserting 02 size stck vlve (throttle vlve or reduction vlve) in the pilot line. It is possile to configure multi-purpose vlve lock y stcking with solenoid operted proportionl directionl control vlves (MEV). -ME Voltge code (See the voltge code tle) 8 ilot/drin type code X: Internl pilot, internl drin type Y: Externl pilot, externl drin type Z: Externl pilot, internl drin type N: Internl pilot, externl drin type he pilot nd drin type setting cnnot e chnged. 9 ilot stck vlve code O: Without stck vlve W: With M-02W-55 : With M : With M-02W-55, M DIRECIONL CONROL VLVES Spool type (See the spool type tle) Flow type (See the specifictions) 1: Q1 flow 2: Q2 flow 3: QMX flow Spool operting method C: Spring center type : Spring offset type (with SOL.) N: No-spring type (without detent) Design No. (he design No. is suject to chnge) Spool differentil pressure code No designtion: Differentil pressure of 0.6 M {6 kgf/cm 2 } 3: Differentil pressure of 0.3 M {3 kgf/cm 2 } 12 Solenoid pilot vlve option code No designtion: erminl ox type D: No-spring type (with detent) For options other thn the ones given ove, see the option code tle for KSO-02 on ge -12 Specifictions Model No. dimeter ort dimeter Mximum operting pressure M {kgf/cm 2 } * 1 Mximum flow rte * 2 L/min Q1 Q2 QMX ilot pressure M {kgf/cm 2 } * 1 ermissile ck pressure M {kgf/cm 2 } Fluid dringe volume t spool switching cm 3 ME12 12 ½ ME16 16 ¾ ME {210} to 14 {8 to 140} 10 {100} 5.9 ME ¼ ME ½ Note: *1 When the mximum operting pressure exceeds 14 M {140 kgf/cm 2 }, select the externl pilot type with pilot pressure of 14 M {140 kgf/cm 2 } mximum. When pilot pressure eyond 14 M {140 kgf/cm 2 } is required with the internl pilot type, select the specifictions with M (option code: ). *2 he mximum flow rtes Q1 nd Q2 show the vlues when equipped with n inlet vlve lock with spring for differentil pressure of 0.6 M {6 kgf/cm 2 } or 0.3 M {3 kgf/cm 2 }, nd QMX shows the vlues when equipped with n inlet vlve lock with spring for differentil pressure of 0.6 M {6 kgf/cm 2 }. When multiple series of vlves with pressure compenstion vlve re configured, the mximum flow rte my not e reched t the second or lter series of vlves. ke 80% of the mximum flow rte s the guide t the third series. Refer to KSO-02 on ge -12 for the solenoid specifictions. -61
2 4 Spool type tle Spool type Meter-in spool * 3 JIS grphic symols for hydrulic system Spool type Meter-out spool * 4 JIS grphic symols for hydrulic system Y1 Y1 Q Y1 Y1 C R Y1 Y1 D S Y1 Y1 F Y1 Note: *3 lthough the mximum opening levels from to nd from to vry depending on Q1, Q2 nd QMX, the opening levels from to nd from to re lwys equivlent to QMX. *4 lthough the mximum opening levels from to nd from to vry depending on Q1, Q2 nd QMX, the opening levels from to nd from to re lwys equivlent to three times QMX. he spool is the sme s tht of solenoid operted proportionl directionl control vlves (MEV). 7 Voltge code tle Voltge code ower supply voltge Voltge code ower supply voltge C 100 V (50/60 Hz), C 110 V (60 Hz) N DC 12 V C 200 V (50/60 Hz), C 220 V (60 Hz) DC 24 V C C 110 V (50 Hz) Q DC 48 V D C 220 V (50 Hz) R DC 100 V J C 240 V (50/60 Hz) S DC 110 V K C 120 V (50/60 Hz) DC 200 V L C 1 V (50/60 Hz) U DC 220 V M C 230 V (50/60 Hz) E C 100 V (50/60 Hz) with rectifier F C 110 V (50/60 Hz) with rectifier C 200 V (50/60 Hz) with rectifier H C 220 V (50/60 Hz) with rectifier See the solenoid specifiction tle for KSO-02 on ge -12 for solenoid specifictions. Mss (kg) Solenoid pilot vlve model code Model No. (1) (2) (3) (4) ME ME ME ME ME Note: Mss (1) ilot stck vlve code: O (without stck vlve) (2) ilot stck vlve code: W (with M-02W -55) (3) ilot stck vlve code: (with M ) (4) ilot stck vlve code: (with M-02W-55, M ) Model code ME C -60- ME -60- ME N -60- ME N -60- D pplicle solenoid vlve model code ( : Voltge code) KSO-02-4C -30 KSO KSO-02-2N -30 KSO-02-2D
3 ccessories Model No. Hexgon socket hed cp olt Quntity ightening torque N m {kgf cm} ME12 M to {120 to 0} ME16 M to 30 {250 to 300} ME20 M to 63 {480 to 630} ME25 M to 30 {250 to 300} ME32 M to 63 {480 to 630} Hndling Mintin the pressure difference etween the pilot pressure nd drin pressure no lower thn 0.8 M {8 kgf/cm 2 }. he spool strts moving t differentil pressure of 0.6 M {6 kgf/cm 2 }. JIS grphic symols for hydrulic system (detil) ME O (Symol for pilot stck vlve: O) ME W (ilot stck vlve code: W) M-02W-55 DIRECIONL CONROL VLVES Y1 Z Y1 Z ME (ilot stck vlve code: ) ME (ilot stck vlve code: ) M M-02W-55 M Y1 Z Y1 Z -63
4 Externl dimension digrm ME12, 16, 20 ilot vlve stck type: ype W 1/2 conduit connection port Hexgon socket hed cp olt Vries depending on the pilot vlve stck type, W: 4-M5 90 O: 4-M5 50 : 4-M (DC: 208) 50 Mnul opertion pin φ ort (externl pilot) 1/4 Flow rte djusting screw t (when SOL. is excited) Flow rte djusting screw t (when SOL. is excited) ort (externl drin) 1/4 40 E C D Mximum U Mximum (flow rte djustment rnge) 6 8 ME20 = 6 Slot for hex key: ME12, 16 = 5 2-φX3, O-ring groove dimeter φ Q1 Q2 Y1 Z R S 5-φX1, O-ring groove dimeter φw1 H J K L M N ilot vlve stck type: ype ilot vlve stck type: ype O ilot vlve stck type: ype E1 E E2 Dimensions dimeter C D E E1 E2 H J K L M N Q1 Q2 R S 1 2 W1 X1 X3 U
5 Externl dimension digrm ME25, 32 ilot vlve stck type: ype W Hexgon socket hed cp olt Vries depending on the pilot vlve stck type, W: 4-M5 90 O: 4-M5 50 : 4-M5 130 ort (externl pilot) 1/4 Flow rte djusting screw t (when SOL. is excited) Mximum U 190 (DC: 208) Mximum ort (externl drin) 1/4 C Mnul opertion pin φ6 Flow rte djusting screw t (when SOL. is excited) (flow rte djustment rnge) D E Socket for hex key: 6 DIRECIONL CONROL VLVES 4-φ, O-ring groove dimeter φw2 2-X3, O-ring groove dimeter φ Q1 Q2 Y1 Z R S 3-φX1, O-ring groove dimeter φw1 L K J H M N Dimensions dimeter C D E E1 E2 H J K L M N Dimensions dimeter Q1 Q2 R S W1 W2 X1 X3 U
6 Sectionl structurl digrm ME12, 16, rt No. Nme Quntity rt specifictions ME-12 ME-16 ME-20 rt specifictions 2 O-ring 2 S S S NR, Hs90 3 O-ring 5 S S568-1 S NR, Hs90 4 O-ring 2 S S S NR, Hs90 7 O-ring 2 S S S NR, Hs90 10 O-ring JIS ckup ring JIS 2407 is cut 14 O-ring 4 S S S NR, Hs90 18 Seling wsher 2 K-C-02 K-C-02 K-C O-ring JIS O-ring 2 S S S NR, Hs90 ME25, rt No. Nme Quntity rt specifictions ME-25 ME-32 rt specifictions 2 O-ring 2 S S NR, Hs90 3 O-ring 3 S S NR, Hs90 4 O-ring 2 S S NR, Hs90 5 O-ring 2 S S NR, Hs90 8 O-ring 2 S S NR, Hs90 11 O-ring JIS ckup ring JIS 2407 is cut 16 O-ring 4 S S NR, Hs90 20 Seling wsher 2 K-C-02 K-C O-ring JIS O-ring 2 S S NR, Hs90-66
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
More informationSolenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
More informationSolenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
LOW-OWE ONSUMTION ILOT-OETED DIETIONL ONTOL VLVE * SIZE 04/0/10 This is n ssemly of solenoid vlve nd directionl control vlve to operte the directionl control vlve (min vlve) y mens of the pilot pressure
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
OM SOLENOID VLVE HD1N SIZE 025 Fetures HD1 N Series (for 7 M) 1. ompct 2. Dust- nd wter-proof of highest level (I67), thnks to use of M12-4 pin connector 3. Since it opertes t low currency, it cn e connected
More informationNT Series SSS MARK-II
efore using the product, plese check the For ltest informtion, DF ctlogs nd opertion mnuls N Series SSS MRK-II se unit Unit with ll options Fetures Extensive vritions wide rnge of functions nd other options
More informationIFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08
IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through
More informationNT Series SSS MARK-II
efore using the product, plese check the For ltest informtion, DF ctlogs nd opertion mnuls Series SSS MRK-II se unit Unit with ll options Fetures Extensive vritions wide rnge of functions nd other options
More information4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
More informationp max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
More informationSolenoid Pilot Operated Directional Control Valve
Solenoid Pilot Operated Directional Control Valve Features The highly reliale KSO-2 adopted as the pilot valve ensures long service life and stale operation. 1 Nomenclature - JS - - - - 1 2 3 4 5 7 8 9
More informationIFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07
ILO OERED DIRECIONL VLVE SIZE NG-1 / CEO-7 Certifiction CE Certified -119115 1 ISO 91: FEURES : Highest performnce in NG 1 Optimized spool design to reduce flow force roven qulity through 1 million endurnce
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
SOLENOID VALVEHD*-WY* SIZE Fetures HD3 Series (for MP) HD Series (for MP). ompct. Directly controllle y. High pressure nd lrge cpcity progrmmle controller 3. Incresed rted flow rte since the vlve opertes
More informationGeneral Information. Up to 31.5 MPa (4570 PSI), 1100L/min (291 U.S.GPM)
SOLNOID CONROLLD ILO ORD VLVS DSHG-//// ILO ORD VLVS DHG/// MNULL ORD VLVS DMG-//// DM-// Generl Informtion Up to. M (7 SI), L/min (9 U.S.GM) u. C- Solenoid contorolled ilot Operted Vlves... ge hese vlves
More information3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94
3/2 nd 4/2-wy Directionl oppet Vlves with Solenoid Opertion Model M-SED 6, Series X Size 6 000 SI (30 r) 6.6 GM (2 L/min) R 22 049/06.98 R 22 049/06.98 Replces: 02.96 Fetures: Direct operted directionl
More informationDSE /116 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 90 l/min
83 2/116 ED DIRECIONL VLVE WIH ROORIONL CONROL SULE MOUNING ISO 41-05 p mx 320 r Q mx l/min MOUNING INERFCE OERING RINCILE ISO 41-05-04-0-05 (CEO 4.2-4-05-320) 21.4 6.3 16.7 3.2 54.8 37.3 27 46 32.5 ø
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More informationApplication Examples of Air-piloted Valves
ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More information4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
More informationTechnical specification. Model Max.flow rate (l/min) Working pressure (MPa) Single solenoid double solenoids. Weight (kgs) Spool return
WE series solenoid directionl control vlves WE series directionl control vlves re solenoid operted directionl spool vlves, these vlves re used to the strt, stop nd direct oil flow. echnicl specifiction
More informationDirectional Valve Size 06 WL 4.06
Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06
More informationSolenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
More information2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation
/, / nd / directionl set vlve with mechnicl, mnul or fluidic opertion RE 0/10.06 /1 ype M-.S.. Sizes 6 nd 10 Component series X Mximum operting pressure 0/ r Mximum flow 0 l/min H701+70+70 le of contents
More informationDirectional spool valves, pilot-operated, with hydraulic or electro-hydraulic actuation
Directionl spool vlves, pilot-operted, with hydrulic or electro-hydrulic ctution WEH nd WH RE 24751 Edition: 2016-06 Replces: 08.08 Size 10 32 Component series 4; 6; 7 Mximum operting pressure 350r [5076psi]
More information4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
More information3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation
3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US
More informationDirectional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4
Directionl Vlve NG 04 WL4.04 Instlltion dimensions ISO 4401/ DIN 4340 4 Functionl Description he directionl control vlves WL 4/04 consists of housing (1), control spool (5) with two centering springs (4)
More informationProportional pressure reducing valve type 3WZCDE6 is a
LICION roportionl pressure reducing vlve type 3WZCDE6 3-wy electriclly controlled, proportionl pressure reducing vlve type 3WZCDE6 is used for reducing pressure in hydrulic system, in continuous wy, s
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
More informationDirectional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
More informationRPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
More informationElectrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
More informationProportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)
roportionl directionl vlve, pilot operted with electricl position feedck nd integrted electronics (OE) ype 4WRKE Nominl sizes 0 to 35 Component series 3 Mximum operting pressure 350 r Mximum flow 3000
More informationProportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)
roportionl directionl vlve, pilot operted with electricl position feedck nd integrted electronics (OE) RE 29075/08.04 Replces: 05.02 /22 ype 4WRKE Nominl sizes 0 to 35 Component series 3 Mximum operting
More informationp max 350 bar Q max 1100 l/min M Maximum flow rate from port P to A - B - T l/min 1100
41 440/107 ED DS10 ILO OERED DISRIUOR SOLENOID OR HYDRULIC (DSC10) CONROLLED SULE MOUNING ISO 4401-10 (CEO 10) p mx 350 r Q mx 1100 l/min MOUNING INERFCE OERING RINCILE ISO 4401-10-08-0-94 (CEO 4.2-4-10-350)
More information2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation
0/0 /, / nd / directionl poppet vlve with solenoid ctution.7 Type M-.SEW...LX Size Up to 0 r Up to 0 L/min Contents Function nd configurtion Symols 0 Specifiction 0 Technicl dt 0 Electricl dt 0 Chrcteristic
More informationDirectional spool valves, pilot-operated, with electro-hydraulic actuation. Type WEH =UR. Features. Contents. RE Edition:
Directionl spool vlves, pilot-operted, with electro-hydrulic ctution ype WEH =UR RE 24802 Edition: 2016-12 Solenoid coil is n pproved component with UR-mrking ccording to UL 906 Size 10 32 Component series
More informationEXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 6X NEC STANDARD
EXLOSION ROOF DIRECIONL CONROL VLVE YE ED SERIE X NEC SNDRD CRCERISICS Hydrulic : Cetop. Mximum pressure in service : r. Nominl Flow mx. : 0 l/mn.(see tle) Directionl control vlves re solenoid operted
More informationDS /217 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE SUBPLATE MOUNTING ISO p max 320 bar Q max 150 l/min MOUNTING SURFACE
41 310/217 ED DS5 SOLENOID OERED DIRECIONL CONROL VLVE SULE MOUNING ISO 4401-05 p mx 320 r Q mx 150 l/min MOUNING SURFCE OERING RINCILE ISO 4401-05-04-0-05 (CEO 4.2-4-05-320) 21.4 6.3 16.7 3.2 54 50.8
More informationHK CATALOGUE HYDRAULICS 12
HK-- LOGUE HYDRULIS ontents Description ype Size ge heck vlves Modulr check vlves In line check vlves Modulr pilot operted check vlves In line doule cting pilot operted check vlves In line simple cting
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationSolenoid controlled pilot operated directional control valves DG5S-10
Solenoid controlled pilot operted directionl control vlves DGS- - Model Code ( F )- D G S - - A( L )-( )( )-( T )- P - T - - JA - M 7 Hydrulic fluid Omit: minerl oil sed fluid, wter-glycol sed fluid F:
More informationDirectional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
More informationRPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
More informationPress control block PSB Type approved according to DIN EN 693
Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording
More informationDIRECTIONAL CONTROLS
DIRCIONL CONROLS Solenoid Operted Directionl Vlves...ge Solenoid Controlled ilot Operted Directionl Vlves...ge Series Shockless ype Directionl Vlves...ge ilot/mnully/mechniclly Operted Directionl Vlves...ge
More information4/2 and 4/3 Solenoid Directional Valve, ISO Size 03
4/ nd 4/3 Solenoid Directionl Vlve, ISO Size 03 Q mx = 60 l/min, p mx = 315 r wo-stge design, with EX-sfty solenoid coil Vlve: High switching relilility thnks to two-stge follower spool design Slip-on
More informationType C2 Seat Type Solenoid Pilot Valve
Type C Seat Type Solenoid Pilot Valve JIS graphic symbols for hydraulic system T eatures No hydraulic locking occurs even during long periods of pressurized operation Nomenclature 1 3 5 - - - - - 1 3 5
More informationDirectional spool valves type WEH32. electro-hydraulically operated
Directionl spool vlve type WEH2 electro-hydruliclly operted NS2 up to 5 M up to 11 D SHEE - SERVICE MNU NUL dm /min WK 46 58 2.212 LICION Directionl spool vlves type WEH2 2 electrohydruliclly operted re
More informationMANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts
MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions
More informationProportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More informationPREFILL AND EXHAUST VALVE PV 100 TO PV 200
PREFILL ND EHUST VLVE Ref. No. Relese 08/2006 1 Description Set type construction. llows free flow from it's port to port. Flow from port to port cn e hd y pplying pilot pressure to it's port. The decompression
More informationDirectional seat valves, direct operated, with solenoid actuation. Type SEW. Contents. Features. RE Edition: Replaces: 07.
Directionl set vlves, direct operted, with solenoid ctution ype SEW RE 22058 Edition: 2013-06 Replces: 07.09 Size 6 Component series 3X Mximum operting pressure r 9150 psi] Mximum flow 25 l/min [6.6 gpm]
More information6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
More informationBlocked for new applications / Für Neuanwendung gesperrt
locked for new pplictions / Für Neunwendung gesperrt RE 29 075/05.02 Replces: 02.0 roportionl directionl vlve, pilot operted with electricl position feedbck ype 4WRKE Nominl sizes 0 to 35 Series 3 Mximum
More informationSpecial Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
More informationDirectional spool valves, direct operated, with solenoid actuation. Type WE VP1. Features. Contents. RE VP1 Edition: Replaces:
Directionl spool vlves, direct operted, with solenoid ctution ype WE V1 RE 23178-V1 Edition: 217-6 Replces: 216-6 Size 6 Component series 5X Mximum operting pressure 35 r Mximum flow 7 l/min H813 Fetures
More informationRPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
More information2/2, 3/2 and 4/2 directional seat valves with solenoid actuation
1/14 /, 3/ nd 4/ directionl set vlves with solenoid ctution RE 058-XE-B/09.13 Replces: 01.10 ype M-.SEW 6...XE... Size 6 Component series 3X Mximum operting pressure 40 r Mximum flow 5 l/min EX units For
More information2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
More informationPILOT OPERATED PRESSURE RELIEF VALVE SERIES - IN-LINE MOUNTING
CONTINENTL HYDRULICS PR*W - PR*WU PILOT OPERTED PRESSURE RELIEF VLVE SERIES - IN-LINE MOUNTING 5505 WEST 123RD STREET SVGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTLHYDRULICS.COM PRECISE PR*W -
More informationDirect Operated Type Solenoid Operated Proportional Throttle Valve
Direct Operated ype Solenoid Operated roportional hrottle Valve EM-G EM-G3 EM-G3-X EMS-2 EMS-2 EM-G4 b X EMS-3 Features hese proportional throttle directional control valves perform spool position feedback
More informationDirect Operated Type Solenoid Operated Proportional Throttle Valve
efore using the product, please check the For latest information, DF catalogs and operation manuals Direct Operated ype Solenoid Operated roportional hrottle Valve EM-G EM-G3 EM-G3-X EMS-2 EMS-2 EM-G4
More informationKit Description. Adapter Kit for Johnson Controls 1 / 2 to 2 VG7xxxxx, VB-3754, VB-3974, VB-4322, and VB-4324 Two- and Three-Way Globe Valves
Selection Guide TAC 1354 Clifford Avenue P. O. Box 2940 Loves Prk, IL 61132-2940 www.tc.com AV-8xx Series Competitive Gloe Adpters AV-8xx Series Adpter Kits TAC AV-8xx Series Adpter Kits mount on the onnet
More informationBERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve
Bsic Vlve??????? WW-400 Bsic Vlve The bsic Model WW-400 diphrgm ctuted hydruliclly operted vlve is t the leding edge of control vlve design. It combines simple nd relible construction with superior performnce,
More informationPneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
More information152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:
2mm ") DI. POINT TO POINT SYSTEM PVC OR STEEL SYSTEM L84 CLL -800--600 TYPE I ND TYPE II OVERHED UNITS 4 6 ") ( 8 ") 6 8 ") ( -0 PLN VIEW 20 (8 28 8 ") ( 8 ") 4 ( -4") 2 (4 ( 8 ") 28 ( 8 ") THE TYPE I
More informationD Power Units in Modular Design Operating pressure 30 to 500 bar, flow rate 0.9 to 12 l/min reservoir sizes 11 l, 27 l, 40 l, 63 l
ower Units in Modulr Design Operting pressure 30 to 500 r, flow rte 0.9 to 12 l/min reservoir sizes 11 l, 27 l, 40 l, 63 l Issue 8-17 E D 8.026 Vlve lock Control circuit _V1 XX X XXX SX_..._V4 oppet/spool
More informationDirectional spool valves, direct operated, with solenoid actuation. Type 5-.WE. Features. Contents. RE Edition: Replaces:
Directionl spool vlves, direct operted, with solenoid ctution Type 5-.WE RE 23352 Edition: 2015-09 Replces: 2012-04 5-chmer version Size 10 Component series 5X Mximum operting pressure 420 r [6091 psi]
More informationDirectional spool valves type WEH16 electrohydraulically
Directionl spool vlve type WEH6 electro-hydruliclly operted NS6 up to 5 M up to D SHEE - SERVICE MNU NUL dm /min WK 99 8. LICION Directionl spool vlves type WEH6 electrohydruliclly operted re intended
More informationFUEL SYSTEM. Table of Contents. Section 3B - Carburetors
Tle of Contents FUEL SYSTEM Section 3B - Cruretors CARBURETORS Fuel System - Trouleshooting.............. 3B-2 Generl Informtion.................... 3B-2 Attenutor And Cr Throttle Levers......... 3B-4
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More informationELECTRICAL AND IGNITION
ELECTRICAL AND IGNITION 2 D TIMING/SYNCHRONIZING/ADJUSTING 2D- 1 Tle Of Contents Pge Timing/Synchronizing/ Adjusting............................ 2D-1 Specifictions........................ 2D-1 Specil Tools.........................
More informationEManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -
More informationPROPORTIONAL DIRECTIONAL CONTROL VALVES PILOT OPERATED WITHOUT LVDT TYPICAL PERFORMANCE SPECIFICATIONS W/O LVDT, OPEN INNER LOOP MOUNTING SURFACE
ED8M PILOT OPERTED WITHOUT TYPICL PERFORMNCE SPECIFICTIONS W/O, OPEN INNER LOOP MOUNTING SURFCE NFP/T3.5.1M R1-1984 D8 (Formely D6) NSI/B93.7M-1986 ISO SIZE 8 These proportional directional control valves
More informationDXPE*J /117 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 31
85 320/117 ED DXPE*J DIRECtIONL CONtROL VLVE PILOt OPERtED, WItH OE ND FEEDCK SUPLtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 DXPE7J ISO 4401-07 DXPE8J ISO 4401-08 p max (see performance table) Q
More informationThe W4G4 Series plug-in manifold has been upgraded in all performance areas, including installation area, workability, life, and power consumption.
M MN W Slim profile The WG Series plug-in mnifold hs een upgrded in ll performnce res, including instlltion re, workility, life, nd power consumption. Drive cylinders up to in dimeter M-T0 *0E 0% Conventionl
More informationFUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally)
FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Fuel Pump..................................
More informationSolenoid operated directional control valves with spool position monitoring DG4V-3-SW
Solenoid operted directionl control vlves with spool position monitoring DG4V-3-SW 3- Directionl Control Vlves Model Code DG4V-3-(L)-M-SW---7-(8)-54 3 4 5 6 7 8 9 hese operted directionl control vlves
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICTIONS D08 Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTCT INFORMTION US Headquarters Dynex/Rivett
More informationSpecifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits
PowerMte Fetures nd Benefits Type P Cle Lockout Complint Specifile Fetures Lockout Plug Sfety Insultor Dimond Clmp Split Pin Contcts Type P Cle Comptile with ll UL 686 listed plugs nd receptcles. 2 3 4
More informationCompact reduced wiring MN4E0 Series 3, 4 port block manifold with high integration, space saving and high function performance.
Extr compct MNE0 MNE0 M Compct reduced wiring MNE0 Series, port lock mnifold with high integrtion, spce sving nd high function performnce. MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0
More informationKit Description. to 3 / 4. VG7xxxxT Two- and Three-Way Globe Valves. VG7xxxxS, VG7xxxxT, and VTM Twoand Three-way Globe Valves / 4
AV-800 Series Competitive Gloe Vlve Adpters AV-8xx Series Adpter Kits Schneider Electric AV-8xx Series Adpter Kits mount on the onnet of competitors vlves to llow replcement of the ctutor with n pproprite
More information-XC9: Adjustable Stroke Cylinder/Adjustable Retraction Type
-XC: djustle Stroke Cylinder/djustle etrction Type djustle Stroke Cylinder/djustle etrction Type The retrct stroke of the cylinder cn e djusted y the djustment olt. pplicle Series Series Description Model
More informationBoiler room components 0861EN April 2017 Distribution and regulation units
oiler room components 8EN pril Distriution nd regultion units R8R R8RY R8RY R8RY R8RY Unit with insultion nd ctutor (optionl) R8RY R8RY R8RY R8RY Description R8R distriution units control heting nd cooling
More informationY03002/ Prefill Exhaust Valve. Description
Prefill Exhust Vlve 350 r /6 Description The Prefill Exhust Vlve (PV) is hydrulic-pilot operted check vlve with set type construction. It llows free flow from port A to port B. Flow from port B to port
More informationDirectional spool valves type UREP10 electrohydraulically
Directionl spool vlve type URE electro-hydruliclly operted NS up to 35 M up to 6dm 3/min DAA SHEE - OERA RAION MANUA NUAL WK 43 37.28 ALICAION Directionl spool vlves type URE electrohydruliclly operted
More informationSolenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a
More informationSchematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationLow-watt Type Solenoid Valve
Low-watt ype Solenoid Valve Features hese solenoid valves use low-wattage type oils (: 5 W, C: 12 W). his valve an e driven diretly from a programmale sequene ontroller sine it has a low urrent requirement.
More informationHVB HYDRAULIC VIBRA PUMPS
1 HV HYDRULIC VIR PUMPS Dynaset HV Vibra Pump improves significantly standard bucket vibration and soil penetration. This value-added feature reduces working time and saves machinery expenses. HV350/ 9-40
More informationLow Pressure Domestic Burners
95 CHAPTER 12 Low Pressure Domestic Burners The principle of vporiing oil in low pressure burner is shown in fig. 1. Air nd oil re mixed within the nole, then Y ---U OIL NOZZLE j FIG. 1. Digrm showing
More informationSolenoid controlled pilot operated directional control valves DG5V-7/DG5V-H8
Solenoid controlled pilot operted directionl control vlves DGV-7/DGV-H8 Solenoid pilot operted directionl vlves incorporte DGV-- design pilot vlves. - Model Code ( F )- D GV - 7 - ( L )-( )-( )-( )- 7
More information