Compact reduced wiring MN4E0 Series 3, 4 port block manifold with high integration, space saving and high function performance.

Transcription

1 Extr compct MNE0 MNE0 M Compct reduced wiring MNE0 Series, port lock mnifold with high integrtion, spce sving nd high function performnce. MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV Compct nd spce sving 0 mm or less vlve height is relized with 0 mm coil width (CKD conventionl prt: mm) Network slve units cn e integrted nd miniturized with hlf the conventionl size (comprison with T* slve unit). Up to points cn e hndled. Device footprint reduced y 0% y using -point comptile type. Seril trnsmission type T* MNE0 (doule sttions) sttions) 0cm 0% Conventionl seril trnsmission type MNS0 (doule sttions ) 0cm Air operted vlve Vrious ir operted vlves, including the AMD Series ir operted vlve for chemicl nd the AGD Series ir operted vlve for process gs, re ville to mtch vriety of pplictions including semiconductor mnufcturing processes.

2 high-performnce lock mnifold Environment protection Eco-friendly nonhlogen leds re used for internl wiring. (T0 type D su-connector) High performnce ms responsiveness hs lnced A nd B ports. (CKD dt vlue using two port vlves integrted type) No more othersome connection work Adoption of connectors llows wiring work to e completed during ssemly. Sfety Assemly structure Prevent mlfunctions eforehnd A check vlve, mnul override protector to prevent incorrect opertion, nd n intke filter to prevent the entry of foreign mtter re provided s stndrd. An ultimte pursuit of sfety prevents vlve mlfunctioning. Mnul cover Vriety Vrious wire connections A vriety of wire connections including connectors nd seril trnsmission for diverse networks re ville. MNE0 MNE0 M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV Reduced wiring lock mnifold, port pilot operted vlve D su-connector Flt cle connector Intermedite wiring lock Seril trnsmission Built-in individul power supply function (AUX) type

3 MNE0 MNE0 M MN (Mster) W WGB A gret vriety of wiring vrition Wiring is reduced while pursuing ese-of-use. MNE0 D su-connector (NE0-T0) The connector using T0 wiring, clled D su-connector, is used widely for FA nd OA devices. The P type is the connector designted in RS--C Stndrds tht pply to personl computer communiction functions. MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B Flt cle connector (NE0-T*) Intermedite wiring lock (NE0-TM*) The connector used for T* wiring complies with MIL Stndrds (MIL-C- 0). Wiring work is simplified with the pressure welded flt cle. Pin numers re ssigned differently sed on the PLC mker, ut the function ssignment is the sme. A reduced wiring connection cn e mde to the center of the mnifold. The 0P flt cle connector nd P RITS connector re ville. F*0E QV QV Seril trnsmission (close contct type) (NE0-T*) Seril trnsmission (NE0-T*) This type is comptile with ech network. (Refer to the following tle.) TD TD TG TG Device Net CC-Link TA0 TA TC0 TC TE0 TE UNIWIRE SYSTEM OMRON CompoBus/S SUNX S-LINK TG CC-Link TJ0 TJ UNIWIRE H system

4 MNE0 MNE0 Built-in individul power supply function (AUX) type Individul externl input is possile even with the reduced wiring mnifold. This lets individul vlves e operted without stopping the system. A rndom vlve cn e operted with n externl power supply while common wiring is connected. The height does not differ with this compct design. M MN (Mster) W WGB Hndy for djusting devices!! Rndom vlve cn e operted with seprte power without disconnecting wiring. Individul wiring system Appliction exmples Use to djust the product t strtup or to fcilitte mintennce Electriclly operte rndom vlve without disconnecting wiring. Electriclly shield rndom vlve without disconnecting wiring. * The vlve is cut off from wiring in the mnifold when the externl input socket is inserted, so this cn e used s temporry individul shut-off switch. Inputs cn e mde from individully from nother system, independent from the centrl wiring for reduced wiring. MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV Reduced wiring lock mnifold, port pilot operted vlve

5 MNE0 MNE0 M Series vrition MNE0/MNE0 Series MN (Mster) W Appernce No. of solenoid position JIS symol Note WGB MNS0 MNS0 TB * The JIS symols for the ctul prt my differ from these drwings due to the reltion of the spce nd port position. L-/ SA/B0 SA/B MNE0 port vlve, two port vlves integrted type port vlve -position N.C. self reset type (Differentil pressure spring return) (A) -position N.O. self reset type (Differentil pressure spring return) (B) -position N.C. self hold type -position N.O. self hold type (A) (B) KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV port vlve, two port vlve integrted type Two port vlves integrted type PA PR PA PR (P) (A) (P) (B) NE00 (B) (P) (A) (P) NE00 (P) (R) NE00 N.C./N.C. self reset type (Differentil pressure return) (R) (R) (R) (R) (R) (P) N.O./N.C. self reset type (Differentil pressure return) (R) (P) PA PR PA PR NE00 (P) (A) (P) (B) (R) (R) NE0S0 (P) (P) (A) (P) (B) (R) (R) NE0S0 (R) N.C./N.C. self reset type (Differentil pressure spring return) (R) (P) N.O./N.C. self reset type (Differentil pressure spring return) (R) (P) PA PR PA PR (P) (R) NE00 N.C./N.O. self reset type (Differentil pressure return) (B) (P) (A) (P) (R) (R) NE00 (B) (P) (A) (P) (R) (R) NE00 (R) (P) N.O./N.O. self reset type (Differentil pressure return) (R) (P) PA PR PA PR (P) (R) NE00 N.C./N.O. self reset type (Differentil pressure spring return) (B) (P) (A) (P) (R) (R) NE0S0 (P) (A) (P) (B) (R) (R) NE0S0 (R) (P) N.O./N.O. self reset type (Differentil pressure spring return) (R) (P) MNE0 port vlve port vlve -position single solenoid self reset type (Differentil pressure spring return) -position doule solenoid self hold type (A) (B) (A) (B) port vlve (P) (R) NE00 (P) (R) NE00 -position ll ports closed -position A/B/R connection -position P/A/B connection (A) (B) (A) (B) (A) (B) (P) (R) NE00 (P) (R) NE00 (P) (R) NE00

6 MNE0/MNE0 Series Series vrition Flow chrcteristics C [dm / (s r)] Note Voltge Single N.C. type Note Refer to "Self-reset type" in Intro for detils on self-reset opertion. Note Effective sectionl re S nd sonic conductnce C re converted s S.0 x C. port vlve Single N.O. type Doule N.C. type Doule N.O. type Solenoid position Two port vlves integrted type A side N.C., B side N.C. A side N.C., B side N.O. A side N.O., B side N.C. A side N.O., B side N.O. -position single solenoid port vlve -position doule solenoid -position ll ports closed Mix A/B port size Push-in joint Femle thred Fier tue joint Electric connection D su-connector Flt cle Intermedite wiring lock Wiring lock mix Seril trnsmission C C M CF T0* T* TM* TX T* T* 0. -position A/B/R connection -position P/A/B connection ø ø M Pge MNE0 MNE0 M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ Note MA/B0 VDC VDC PA/B 0.0 Note : Seril trnsmission is used only for VDC F*0E QV QV NE00 NE00 ( ) Reduced wiring lock mnifold, port pilot operted vlve

7 MNE0/MNE0 Series MNE0 MNE0 Mnul override Wiring method M T0 T0R D su-connector TMA Intermedite wiring lock (RITSPX) Other options Common with locking nd non-locking (Provided s stndrd) MN E Low exoergic, energy sving circuit type F A/B port filter integrted (Mster) Mesh hole dimeter ø0.mm W WGB T0 0 pin flt cle connector MNS0 T0R (With power supply terminl) MNS0 TMC Intermedite wiring lock (RITSPX) TB A/B port filter L-/ SA/B0 SA/B KA/B T 0 pin flt cle connector TM TR (Without power supply terminl) U Built-in individul power supply function (AUX) type D* Individul wiring D-connector Intermedite wiring lock (0 pin flt cle connector) F PVG/ PV/ MA/B0 PA/B T TR 0 pin flt cle connector (Without power supply terminl) T* Seril trnsmission Led wire length D : 00mm D0 : 00mm D : 000mm D : 000mm D : 000mm F*0E T QV TR QV pin flt cle connector (Without power supply terminl) T* Seril trnsmission (close contct type) D* Individul wiring D-connector Without socket / with socket nd terminl Without socket DN With socket nd terminl D Electric connection circuit digrm With surge suppressor nd indictor light (provided s stndrd) (+, -) R LED COM (-, +) sol Doule solenoid Single solenoid (+, -) R LED (+, -) sol COM (-, +) sol LED R

8 Pneumtic components Sfety precutions Alwys red this section efore strting use. Refer to Intro for generl precutions for vlves., port pilot operted vlve MNE0/MNE0 Series. Self reset type Design & Selection WARNING The self-reset type is ville for the vlve lock solenoid position clss. There re two self-reset types, "differentil pressure return" nd "differentil pressure spring return". With oth types, the min vlve returns to the origin (self-resets) when OFF under norml pressures. However, if the supply pressure is 0 in the ON stte, The "differentil pressure return" type will hold the current position, nd The "differentil pressure spring return" type will return to the origin with the spring force. Select the type sed on the interlock specifictions of the device in use. Min vlve hold/return sttes NE0 NE0 / /,,, S, S, S, S,,. Check vlve WARNING Vlve type Source pressure down when ON source pressure return Power supply shutdown when ON port vlve single N.C./N.O. self reset type (differentil pressure spring return) OFF (origin) movement ON movement OFF (origin) movement port vlve doule N.C./N.O. self hold type ON position holding ON position holding Two port vlve integrted type N.C./N.O. self reset type (differentil pressure return) ON position holding OFF (origin) movement Two port vlve integrted type N.C./N.O. self reset type (differentil pressure spring return) OFF (origin) movement ON movement OFF (origin) movement port vlve -position single solenoid self reset type (differentil pressure spring return) OFF (origin) movement ON movement OFF (origin) movement port vlve -position doule solenoid self hold type ON position holding ON position holding port vlve -position OFF (origin) movement ON movement OFF (origin) movement The check vlve locks the ck pressure from djcent ir devices, etc. However, the structure does not llow the pressure sel to e held continuously, so do not use for other thn the ck pressure lock.. Built-in individul power supply function (AUX) type WARNING The polrity of the reduced wiring side nd individul power supply side is plus common. Proper opertion will not occur if polrity is incorrect. Use seprte power for the reduced wiring side nd the individul power input side. If the sme power is used, the reduced wiring side's wiring will not e cut off, resulting in incorrect opertions. Inputting individul power Open the electric cover, nd connect the power input socket (NE0- socket ssemly S/D). When the power input socket is connected, the vlve's internl wiring will e temporrily seprted from the reduced wiring in the mnifold, so power cn e supplied from n externl source. Shut off when socket is inserted (-) COM (+) (-) Mnifold internl wiring side (-) COM (+) (-) AUX terminl side Outline of AUX terminl polrity nd internl circuit (-) COM (+) (-) Vlve lock upper socket insertion digrm MNE0 MNE0 M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV Reduced wiring lock mnifold, port pilot operted vlve 9

9 MNE0/MNE0 Series MNE0 MNE0. Wiring lock mix Design & Selection M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 WARNING When using the mixed wiring lock specifictions y using T*R (right side specifictions) for the wiring lock, short-circuiting of the signl wires etween the wiring locks must e prevented. If the left nd right signls re connected, unintentionl vlve lock opertion will occur nd device dmge could occur. Ly out the supply/exhust lock NE0-Q*-C (specifictions without internl wiring) etween the vlve supplied power from the left side nd the right side. T*, TM 0 9 com T* ( TM control sttions) Supply nd exhust Internl wiring none (T*R control sttions) com com com com com T*R com 9 0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV Exmple of incorrect lyout The left nd right wirings interfere t the center. T*, TM 0 9.Surge suppressor CAUTION com Supply nd exhust com com com com com The surge suppressor enclosed with the solenoid vlve is used to protect the output contct for tht solenoid vlve drive. There is no protection for the other peripherl devices, nd devices could e dmged or mlfunction y the surge. Surge generted y other devices could e sored nd cuse dmge such s urning. Cre must e tken for points elow. ()The surge suppressor functions to limit solenoid vlve surge voltge, which cn rech severl hundred V, to low voltge level tht the output contct cn withstnd. Depending on the output circuit used, this my e insufficient nd could result in dmge or mlfunction. Check whether the surge suppressor cn e used y the surge voltge limit of the solenoid vlve in use, the output device's withstnd pressure nd circuit structure, nd y the degree of return dely time. If necessry, provide other surge mesures. The inverse voltge surge generted when OFF cn e suppressed to the following levels. Voltge specifiction VDC VDC T* ( TMcontrol sttions) Reverse voltge vlue when power turned OFF V V (T*R control sttions) T*R com 9 0 () When using the NPN type output unit, the voltge given in the left tle nd surge voltge equivlent to the power voltge could e pplied on the output trnsistor. Instll the contct protection circuits in this cse. (Exmple of output trnsistor protective circuit instlltion ) (Exmple of output trnsistor protective circuit instlltion ) Progrmmle controller side Solenoid vlve side Progrmmle controller side Solenoid vlve side 0

10 MNE0/MNE0 Series () If nother device or solenoid vlve is connected in prllel to the solenoid vlve, the inverse voltge surge generted when the vlve is OFF would pply to those devices. Even when using the solenoid vlve with surge suppressor for VDC, the surge voltge my rech minus severl ten V depending on the model. This inverse polrity voltge could dmge or cuse the other devices connected in prllel to mlfunction. Avoid prllel connection of devices suspected of reversing polrity voltges, e.g., LED indictors. When driving severl solenoid vlves in prllel, the surge from other solenoid vlves could enter the surge suppressor of one solenoid vlve with surge suppressor. Depending on the current vlue, tht surge suppressor could urn. When driving severl solenoid vlves with surge suppressors in prllel, surge current could concentrte t the surge suppressor with the lowest limit voltge nd cuse similr urning. Even if the solenoid vlve type is the sme, the surge suppressor's limit voltge cn e inconsistent, nd in the worst cse, could result in urning. Avoid prllel drive of severl solenoid vlves. ()The surge suppressor incorported in the solenoid vlve will often e short-circuited if it is dmged y n excessive voltge or current from the other solenoid vlves. If the surge suppressor fils, if lrge current flows when output is on, the output circuit or solenoid vlve could e dmged or ignite. Do not keep power on in fulty stte. Provide n overcurrent protection circuit on the power or drive circuit or use power supply with overcurrent protection so tht lrge current does not flow continuously. MNE0 MNE0 M MN (Mster) W. Low exoergic, energy sving circuit type CAUTION Do not use this vlve in n environment where the virtion nd impct exceed specifictions. The vlve could mlfunction. With the type with low exoergic, energy-sving circuit, the current limit circuit is uilt into the vlve lock. The current vlue when the coil is sucked nd held is lowered with this structure. Only plus common polrity is used. Individul specifictions for low exoergic, energy sving circuit type At strting Energizing current A At strting Power consumption W. Polrity CAUTION Descriptions At holding At holding DC DC DC DC DC DC DC DC V I Control circuit When selecting the low exoergic, energy-sving circuit, the connection is dedicted to the plus common. Note the connection polrity. Refer to Section, Surge suppressor, on pge 0 for detils on the surge suppressor. (-) COM (+) SOL Single, energy sving circuit integrted. Wiring in mnifold when using with wiring reduced type 0ms (-) COM (+) (-) Upper view of vlve lock CAUTION The internl circuit of the individul wiring vlve lock is completely seprted from the reduced wiring electric circuit in the mnifold. Even if the individul wiring vlve lock is inserted etween the reduced wiring vlve locks, the pin lyout on the wiring lock side will not chnge. Wiring lock 0 9 com Supply nd exhust com (-) COM (+) (-) com SOL SOL Doule, energy sving circuit integrted Individul doule solenoid Doule solenoid Doule solenoid Single solenoid Doule solenoid com com com WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV Reduced wiring lock mnifold, port pilot operted vlve The pin lyout on the wiring lock side elimintes the individul wiring in order from the first sttion, nd shifts the locks in order.

11 MNE0/MNE0 Series MNE0 MNE0 M. Mnul override WARNING Instlltion & Adjustment. How to instll mnifold CAUTION MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F The E Series is pilot operted solenoid vlve. The min vlve will not chnge even if the mnul override is operted unless ir is supplied to the P port (PA port for externl pilot). Mnul override protective cover is provided s stndrd. The mnul override protective cover is closed when the vlve is shipped to protect mnul override, which cnnot e seen when delivered. Open the protective cover nd operte mnul override. Note tht the protective cover cnnot e closed unless the locking mnul override is relesed. Mnul override is used for oth non-locking nd locking. The lock is pplied y pressing down nd turning mnul override. Press down first to lock. If mnul override is turned without eing pressed down, it could e dmged or ir could lek. The E Series is dedicted for mounting on the DIN ril. The mnifold could drop off or e dmged if not instlled correctly. If the mnifold weighs more thn kg, or when using in n environment with virtion or impct, fix the DIN ril onto the surfce t 0 to 00 mm spcing, nd confirm tht there is no prolem with instlltion efore strting opertion. Use the specifictions to clculte the weight. Also clculte the weight of the other devices instlled. (Refer to pge for the weights.) PVG/ PV/ MA/B0 PA/B F*0E QV QV. Externl pilot piping port CAUTION The externl pilot type hs seprte pilot ir supply. ø push-in joint is used to supply the pilot ir, so check tht the piping connection position is correct. Mlfunctions could occur if the piping is incorrect. Port indiction * The A/B ports nd the R port cnnot e pressurized. Externl pilot / (PA) port Applictions Indiction (ISO stndrds) Pilot ir Pilot ir supplying port / DIN ril Set screw Exhust (R) port Air supply (P) port The externl pilot supply port is the ø push-in joint on the top of the supply/exhust lock.

12 MNE0/MNE0 Series. Mnul override During Use & Mintennce. Externl pilot piping port MNE0 MNE0 WARNING Opening nd closing the mnul protective cover Do not excessively force the mnul protective cover when opening nd closing it. Excessive force could cuse fults. (Less thn N) Slide type How to operte mnul override ()Push & non-locking opertion Push in the direction of the rrow until it stops. Mnul override is unlocked when relesed. ()Push & locking opertion Push mnul override nd turn 90 in the direction of the rrow. Mnul override is not unlocked even when relesed. CAUTION Note supply pressure for the type with two port vlves. The vlving element of the type with two port vlves is operted with the min (P port) supply pressure. Check tht the min pressure (P port) is not higher thn the pilot pressure (PA port). Check tht the min pressure (P port) does not drop elow 0. MP. Externl pilot / (PA) port. Port filter Exhust (R) port Air supply (P) port CAUTION The port filter prevents the entry of foreign mtter, nd prevents prolems from occurring in the mnifold (mesh hole ø0. mm). This does not improve the qulity of the compressed ir, so red Wrnings nd Precutions, then mount, instll, nd djust the filter ccordingly. Do not remove or force the port filter. The filter could deform nd result in prolems. If contminnts nd foreign mterils re found on the filter surfce, low lightly, or remove them y tweezers, etc. M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV OFF 90 ON Supply nd exhust lock WARNING When conducting mnul opertions, mke sure tht there re no people ner the moving cylinder. Vlve lock A/B port filter (Option) Filter Reduced wiring lock mnifold, port pilot operted vlve

13 MNE0 MNE0 M Reduced wiring lock mnifold, port pilot operted vlve MNE0/MNE0 Series Refer to Intro for detils. MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B PA/B F*0E QV QV Common specifictions Descriptions Mnifold method Mnifold type Working fluid Type of vlve nd opertion method Mx. working pressure MP Min. working pressure MP Withstnding pressure MP Amient temperture C Fluid temperture C Luriction Protective structure Virtion/impct m/s Working environment Mnul override Note Check vlve locks the ck pressure from djcent ir devices, etc. However, the structure does not let the pressure sel e held continuously, so do not use for other thn the ck pressure lock. F Individul specifictions PVG/ Descriptions Port A/B PV/ Port size Port P/R Externl pilot port MA/B0 Port port vlve port vlve Two port vlves integrted type Note ø, ø push-in joint, M, fier tue ø, ø push-in joint ø push-in joint - Response time -position Single solenoid Doule solenoid 0 or less or less 0 or less or less or less - Note ms -position - 0 or less - Note The response time is for the 0. MP supply pressure, pre-luricting type. Note With the vlve with two port vlves, the min pressure is used to operte the vlving element, nd cnnot e used with the externl pilot. Check tht the supply ir flow is sufficient so tht the supply pressure does not drop elow the minimum working pressure due to the opertion of the connected lod (ir operted vlve), etc. Flow chrcteristics port vlve -position -position C (dm / (s r)) port vlve All ports closed position A/B/R connection P/A/B connection Two port vlves integrted type -position Note: Effective sectionl re S nd sonic conductnce C re converted s S.0 C. Weight Wiring lock (g) Supply nd exhust lock (g) Vlve lock (g) End lock DIN ril (g) (g) Regultor lock (g) Note Block mnifold Common supply/exhust, check vlve integrted Note Compressed ir Pilot operted soft spool vlve to to Not required Dust proof 0 or less / 00 or less Contining corrosive gs is impermissile. Common with locking nd non-locking type D su-connector type T0 Q/QZ Joint Side Joint Top 90 -position single solenoid Joint Side. Joint Top. ER/EL g/mm - Flt cle connector type T* 9 QK 9 9 -position doule solenoid 9 Note The vlues my differ slightly sed on the regultor lock specifictions. Electric specifictions Descriptions Rted voltge V, DC Rted voltge fluctution rnge ( 0% nd 0% % using seril trnsmission) VDC 0.0 (0.0) Note Rted current A VDC 0.0 (0.0) Note Power consumption W Het proof clss VDC VDC 0. (0.) Note B Surge protective circuit Indictor With surge suppressor LED Note The vlues in ( ) re for the type with low exoergic, energy-sving circuit. When using the vlve lock with individul power supply function (AUX) or type with low exoergic, energy-sving circuit, energizing is limited to the plus common. Intermedite wiring lock Seril trnsmission TMA TMC TM T* 0 T* QKZ 9 9 -position. 0. QX Two port vlve integrted type 9 QKX

14 Mximum numer of sttions energized y mnifold Descriptions MNE0/MNE0 Series Reduced wiring lock mnifold Doule Solenoid (Doule wiring) Single Solenoid Mix Mnifold (Solenoid numer) Pge MNE0 MNE0 D su-connector type T0 ( pin) T0R T0 T0R T Flt cle TR connector type T TR T TR TMA Intermedite TMC wiring lock type TM TA0 TA TC0 TC Seril trnsmission type TE0 (with dedicted unit) TE TJ0 TJ TG TD Seril trnsmission type TD (close contct type) TG TG Note RITS connector P (-) Tiko Electronics Amp Co., Ltd. Slve unit specifictions Descriptions Power voltge Unit side Vlve side Communiction side Current Unit side consumption Vlve side Communiction side Output numer Occupied numer TC TG Note TC0 VDC 0% VDC + 0% - % - TC: 0 ma or less 00 ma or less (when ll points output ON) TC0: 0 ma or less (when ll points output ON) ma or less (when ll points OFF) - TC: points points TC0: points TC: node ddress ( points mode) TC0: node ddress ( points mode) D su-connector type Left D su-connector type Right 0 pin flt cle connector Left (with power supply terminl) 0 pin flt cle connector Right (with power supply terminl) 0 pin flt cle connector Left (without power supply terminl) 0 pin flt cle connector Right (without power supply terminl) 0 pin flt cle connector Left (without power supply terminl) 0 pin flt cle connector Right (without power supply terminl) pin flt cle connector Left (without power supply terminl) pin flt cle connector Right (without power supply terminl) RITS connector P pcs. Note RITS connector P Note 0 pin flt cle connector UNIWIRE SYSTEM points UNIWIRE SYSTEM points OMRON CompoBus/S points OMRON CompoBus/S points SUNX S-LINK points SUNX S-LINK points UNIWIRE H system points UNIWIRE H system points CC-Link DeviceNet points DeviceNet points CC-Link points CC-Link points sttion TA TA0 00 ma or less (when ll points output ON) Note tht current consumption of vlve is not included. - TA: points TJ: points TA0: points TJ0: points TA: Output points TA0: Output points TJ TE TJ0 TE0 VDC + 0% - % - TJ: Output points TJ0: Output points sttions sttions sttions sttions 9 sttions 9 sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions 0 ma or less (when ll points output ON) Note tht current consumption of vlve is not included. TE: points TE0: points TE: FAN-in: TE0: FAN-in: Note Note CC-Link is ver..0. Note Consult with CKD for EDS file. (EDS file: Text file of prmeters for communicting with ech compny's mster.) Note FAN-in indictes input cpcity from D-G line. (It is necessry to clculte the connection quntity.) Ozone specifictions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions 0 sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions sttions TD TD Note TG TG Note VDC 0% VDC + 0% - % to VDC TD: 0 ma or less - TG: ma or less TD: ma or less (when ll points output ON) ma or less (when ll points OFF) 0 ma or less - TD: points TG: points TD: points TG: points TD: ytes TD: ytes points points points points points points points points points points 0 points points points points points points points points points points points points points points points points Ozone specifictions cn e selected with "H" option "A" in How to Order on pges nd 0. Clen room specifictions (Ctlog No. CB-0SA) Dust genertion preventing structure for use in clenrooms Pge Pge 0 TG: 90 ma or less (when ll points output ON) TG: sttion TG: sttion M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV Reduced wiring lock mnifold, port pilot operted vlve ** VOLTAGE P0

15 MNE0 MNE0 M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV MNE0/MNE0 Series How to order mnifold Discrete vlve lock N E0 0 Block mnifold A Vlve type C M N E0 0 C R M T D W F DIN ril mounting method Refer to pge 9 for model no. of cle with D-su connector. B Solenoid position (Note 0) Note on model no. selection Note : The type with two port vlves cnnot e used with the externl pilot type. Contct CKD for the other working conditions. Note : The type with two port vlves resets the min vlve with the min pressure, so if there is difference etween the pilot pressure nd min pressure, the response time my e delyed. Note : Check tht the min pressure supplied to the vlve lock with two port vlves is higher thn the pilot pressure, nd tht the min pressure does not drop elow 0. MP. Note : Check the connector pin lyout (exmple) given on pges to for the doule wiring specifictions. When ordering single vlve lock, the doule wiring designtion is limited to the - position single solenoid for the port vlve, nd the port vlve. Note : The doule wiring specifictions cnnot e selected for the discrete individul wiring vlve lock. Note : Energizing is limited to the plus common. "E" nd "U" cnnot e selected simultneously. Note : "U" cnnot e selected when individul wiring is selected. Note : A filter (for preventing entry of foreign mtter) is incorported in the supply/exhust lock's P port. Note 9: Differs sed on the specifictions. Check on pge. Note 0 : Refer to the precutions on pge 9 for the selfreset type specifictions. D-su / flt cle connector D F C Port size E Mnul override Individul wiring type H Option J Voltge D Pressure djustment F Wiring method I Sttion numer G Terminl nd connector pin rry * Complete mnifold specifiction sheet (Pge 9). Symol Descriptions A Vlve type port vlve, two port vlve integrted type port vlve,, port vlve mix B Solenoid position Single N.C. self reset type (Differentil pressure spring return) Single N.O. self reset type Doule N.C. self hold type Doule N.O. self hold type A side vlve: N.C. self reset type (Differentil pressure return) S B side vlve: N.C. self reset type (Differentil pressure spring return) A side vlve: N.C. self reset type (Differentil pressure return) S B side vlve: N.O. self reset type (Differentil pressure spring return) A side vlve: N.O. self reset type (Differentil pressure return) S B side vlve: N.C. self reset type (Differentil pressure spring return) A side vlve: N.O. self reset type (Differentil pressure return) S (Note ) B side vlve: N.O. self reset type (Differentil pressure spring return) -position single solenoid self reset type (differentil pressure spring return) -position doule solenoid self hold type -position ll ports closed -position A/B/R connection -position P/A/B connection Mix mnifold C Port size CF C CL C C CL CL M CX port vlve ø. red joint for fier tue (tue UP-90-**) ø. push-in joint for fier tue Lterl (tue UP-90-**) ø. push-in joint for fier tue Upwrd (tue UP-90-**) ø push-in joint Lterl ø push-in joint Lterl ø push-in joint Upwrd ø push-in joint Upwrd M femle thred (with non-rotting) Mix push-in joint D Pressure djustment R Regultor lock mounted mnifold (Note, ) E Mnul override M Non-locking dedicted mnul override (with mnul cover) F Wiring method Refer to the following pge. G Terminl nd connector pin rry Blnk W H I J Stndrd wiring Doule wiring (Note, ) Option E Low exoergic, energy sving circuit type (Note ) U Built-in individul power supply function (AUX) type (Note, ) A Ozone proof F A/B port filter integrted (Note ) Sttion numer sttion to to sttions (Note 9) Voltge M Two port vlve integrted type port vlve VDC VDC * Refer to Pge 0 for seril trnsmission type. Block mnifold Type Discrete vlve lock

16 Block mnifold Type MNE0/MNE0 Series Reduced wiring lock mnifold Discrete vlve lock MNE0 MNE0 (Wiring method list) Symol Descriptions F Wiring method T0 pin D su-connector Left T0R pin D su-connector Right T0 0 pin flt cle connector Left (with power supply terminl) Note T0R 0 pin flt cle connector Right (with power supply terminl) Note T 0 pin flt cle connector Left TR 0 pin flt cle connector Right T 0 pin flt cle connector Left TR 0 pin flt cle connector Right T pin flt cle connector Left TR pin flt cle connector Right TMA Intermedite wiring lock RITS connector P pcs. Note TMC Intermedite wiring lock RITS connector P Note TM Intermedite wiring lock 0 pin flt cle connector TX Wiring lock Mix Note, Blnk Vlve lock for reduced wiring D D-connector 00 mm D0 D-connector 00 mm D D-connector 000 mm D D-connector 000 mm D D-connector 000 mm DN D-connector without socket D D-connector socket, terminl ttched Individul wiring type Note : When mixing the connectors with the T0 or T0R type with power terminl, only T0R cn e comined with T0, nd T0 with T0R. Note : RITS connector P (-) Tiko Electronics Amp Co., Ltd. Note : pcs. re designted in the mnifold specifictions. Consult with CKD for pcs. or more. Note : If TX is selected for the wiring connection method, individul wiring cnnot e selected. M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV Reduced wiring lock mnifold, port pilot operted vlve

17 MNE0/MNE0 Series MNE0 MNE0 Mnifold components explntion nd prts list M MN (Mster) W WGB MNS0 MNS0 Supply nd exhust lock Intermedite wiring lock End lock TB L-/ Regultor lock SA/B0 Vlve lock SA/B KA/B F PVG/ PV/ MA/B0 PA/B Exmple of min component model no. (Refer to Pges to for detils.) Prts nme Wiring lock Vlve lock Vlve lock Wiring lock (D su-connector is shown in the drwing) Model no. (exmple) NE0-T0 NE00-C- NE00-C- Prts nme Regultor lock Supply nd exhust lock End lock Model no. (exmple) NE0-RA-RL NE0-Q- NE0-ER Relted prts list Prts nme Model no. NE0-JOINT-C Prts nme Crtridge type push-in joint Model no. NE0-JOINT-CF F*0E NE0-JOINT-C nd relted prts NE0-JOINT-CPG QV QV Crtridge type push-in joint nd relted prts NE0-JOINT-C NE0-JOINT-CL NE0-JOINT-CL NE0-JOINT-CL

18 MNE0 MNE0 M MN (Mster) W WGB MNE0/MNE0 Series How to order mnifold Discrete vlve lock N E0 0 Block mnifold C Seril trnsmission M N E0 0 C R M TG D W F DIN ril mounting method M D * Refer to Pge for D su-connector / flt cle connector type. F C Port size E Mnul override Individul wiring type H Option J Voltge D Pressure djustment F Wiring method (seril trnsmission) I Sttion numer G Terminl nd connector pin rry * Complete mnifold specifiction sheet (Pge 9). Block mnifold Type Discrete vlve lock MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV A Vlve type B Solenoid position (Note 0) Note on model no. selection Note : The type with two port vlves cnnot e used with the externl pilot type. Contct CKD for the other working conditions. Note : The type with two port vlves resets the min vlve with the min pressure, so if there is difference etween the pilot pressure nd min pressure, the response time my e delyed. Note : Check tht the min pressure supplied to the vlve lock with two port vlves is higher thn the pilot pressure, nd tht the min pressure does not drop elow 0. MP. Note : Check the connector pin lyout (exmple) given on pges nd 9 for the doule wiring specifictions. When ordering single vlve lock, the doule wiring designtion is limited to the - position single solenoid for the port vlve, nd the port vlve. Note : The doule wiring specifictions cnnot e selected for the discrete individul wiring vlve lock. Note : Energizing is limited to the plus common. "E" nd "U" cnnot e selected simultneously. Note : "U" cnnot e selected when individul wiring is selected. Note : A filter (for preventing entry of foreign mtter) is incorported in the supply/exhust lock's P port. Note 9 : Differs sed on the specifictions. Check on pge. Note 0 : Refer to the precutions on pge 9 for the self-reset type specifictions. Symol Descriptions A Vlve type port vlve, two port vlve integrted type port vlve,, port vlve mix B Solenoid position Single N.C. self reset type (Differentil pressure spring return) Single N.O. self reset type S S S S Doule N.C. self hold type Doule N.O. self hold type A side vlve N.C. self reset type B side vlve N.C. self reset type A side vlve N.C. self reset type B side vlve N.O. self reset type A side vlve N.O. self reset type B side vlve N.C. self reset type A side vlve N.O. self reset type (Note ) B side vlve N.O. self reset type (Differentil pressure return) (Differentil pressure spring return) (Differentil pressure return) (Differentil pressure spring return) (Differentil pressure return) (Differentil pressure spring return) (Differentil pressure return) (Differentil pressure spring return) -position single solenoid self reset type (Differentil pressure spring return) -position doule solenoid self hold type -position ll ports closed -position A/B/R connection -position P/A/B connection Mix mnifold C Port size CF C CL C C CL CL M CX port vlve ø. red joint for fier tue (tue UP-90-**) ø. push-in joint for fier tue Lterl (tue UP-90-**) ø. push-in joint for fier tue Upwrd (tue UP-90-**) ø push-in joint Lterl ø push-in joint Lterl ø push-in joint Upwrd ø push-in joint Upwrd M femle thred (with non-rotting) Mix push-in joint D Pressure djustment R Regultor lock mounted mnifold (Note, ) E Mnul override M Non-locking dedicted mnul override (with mnul cover) F Wiring method Refer to the following pge. G Terminl nd connector pin rry H I Blnk W J port vlve Two port vlve integrted type Stndrd wiring Doule wiring (Note, ) Option E Low exoergic, energy sving circuit type (Note ) U Built-in individul power supply function (AUX) type (Note, ) A Ozone proof F A/B port filter integrted (Note ) Sttion numer sttion to to sttions (Note 9) Voltge VDC 0

19 MNE0/MNE0 Series Reduced wiring lock mnifold Block mnifold Type Discrete vlve lock MNE0 MNE0 (Wiring method list) Symol Descriptions F Wiring method TA0 UNIWIRE SYSTEM points TA UNIWIRE SYSTEM points TC0 OMRON CompoBus/S points TC OMRON CompoBus/S points TE0 SUNX S-LINK points TE SUNX S-LINK points TJ0 UNIWIRE H system points TJ UNIWIRE H system points TG CC-Link TD Close contct type Device Net points TD Close contct type Device Net points TG Close contct type CC-Link points TG Close contct type CC-Link points Blnk Vlve lock for reduced wiring D D-connector 00 mm D0 D-connector 00 mm D D-connector 000 mm D D-connector 000 mm D D-connector 000 mm DN D-connector without socket D D-connector socket, terminl ttched Individul wiring type M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV Reduced wiring lock mnifold, port pilot operted vlve

20 MNE0/MNE0 Series MNE0 MNE0 Mnifold components explntion nd prts list M MN (Mster) W WGB End lock Supply nd exhust lock MNS0 MNS0 TB L-/ Vlve lock Regultor lock SA/B0 SA/B KA/B Vlve lock Wiring lock (Seril trnsmission slve unit T*) F PVG/ PV/ MA/B0 PA/B Exmple of min component model no. (Refer to Pges to for detils.) Prts nme Wiring lock Model no. (exmple) NE0-TG Prts nme Regultor lock Vlve lock NE00-C- Supply nd exhust lock NE00-C- End lock Wiring lock (Seril trnsmission slve unit (close contct type) T*) Model no. (exmple) NE0-RA-RL NE0-Q- NE0-ER Relted prts list F*0E QV QV Prts nme Crtridge type push-in joint nd relted prts Model no. NE0-JOINT-C NE0-JOINT-C NE0-JOINT-C NE0-JOINT-CL NE0-JOINT-CL NE0-JOINT-CL Prts nme Crtridge type push-in joint nd relted prts Model no. NE0-JOINT-CF NE0-JOINT-CPG

21 MNE0 Series Reduced wiring lock mnifold (vlve lock); port vlve MNE0 MNE0 M Internl structure nd prts list port vlve NE00 -position single solenoid normlly closed MN (Mster) (A) W (P) (R) 9 0 WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ NE00 -position single solenoid normlly open MA/B0 (B) PA/B 9 0 F*0E QV QV (P) (R) Min prts list No. Prts nme Mteril No. Prts nme Mteril Electric cover PBT/PC Check vlve PBT/UR Coil ssemly - 9 Body Aluminum Coil dummy PPS 0 Piston room ssemly - Mnul cover PBT Spool ssemly Aluminum Pilot lock PPS/PA Port lock PA Mnul override POM Crtridge type push-in joint - Connection key POM Wiring connector ssemly LCP

22 Internl structure nd prts list NE00 -position doule solenoid normlly closed (Self hold type) (A) (P) (R) MNE0 Series Reduced wiring lock mnifold (vlve lock); port vlve 9 0 MNE0 MNE0 M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 NE00 -position doule solenoid normlly open (Self hold type) (B) (P) (R) 9 0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV Min prts list No. Prts nme Electric cover Coil ssemly Mnul cover Pilot lock Mnul override Connection key Check vlve Mteril PBT/PC - PBT PPS/PA POM POM PBT/UR No. 9 0 Prts nme Body Piston room ssemly Spool ssemly Port lock Crtridge type push-in joint Wiring connector ssemly Mteril Aluminum - Aluminum PA - LCP Reduced wiring lock mnifold, port pilot operted vlve

23 MNE0 Series Reduced wiring lock mnifold (vlve lock); two port vlve integrted MNE0 MNE0 M Internl structure nd prts list Two port vlves integrted type NE00 N.C./N.C. self reset type (differentil pressure return) MN (B) (Mster) W WGB PA PR (P) (A) (P) (R) (R) (R) (P) B side N.C. A side N.C. MNS0 MNS0 TB NE00 N.C./N.O. self reset type (differentil pressure return) L-/ SA/B0 SA/B KA/B PA PR (B) (P) (A) (P) (R) (R) (R) (P) B side N.O. A side N.C. 9 0 F PVG/ PV/ MA/B0 PA/B F*0E NE00 N.O./N.C. self reset type (differentil pressure return) PA PR (B) (P) (A) (P) (R) (R) (R) (P) B side N.C. A side N.O. NE00 N.O./N.O. self reset type (differentil pressure return) The drwing shows the solenoids OFF t oth ends of the two port vlves integrted N.C./N.O. self reset type (differentil pressure return). QV QV PA PR (B) (P) (R) (A) (P) (R) (R) (P) B side N.O. A side N.O. Min prts list No. Prts nme Mteril No. Prts nme Mteril Electric cover PBT/PC Body Aluminum Coil ssemly - 9 Piston room ssemly - Mnul cover PBT 0 Spool ssemly Aluminum Pilot lock PPS/PA Port lock PA Mnul override POM Crtridge type push-in joint - Connection key POM Wiring connector ssemly LCP Check vlve PBT/UR

24 Internl structure nd prts list NE0S0 N.C./N.C. self reset type (differentil pressure spring return) MNE0 Series Reduced wiring lock mnifold (vlve lock); two port vlve integrted MNE0 MNE0 M PA PR (P) (A) (P) (B) (R) (R) (R) (P) NE0S0 N.C./N.O. self reset type (differentil pressure spring return) PA PR PA PR (P) (A) (P) (P) (A) (P) (B) (B) (R) (R) (R) (R) (R) (P) NE0S0 N.O./N.C. self reset type (differentil pressure spring return) PA PR (P) (A) (P) (B) (R) (R) (R) (P) NE0S0 N.O./N.O. self reset type (differentil pressure spring return) (R) (P) 9 0 The drwing shows the solenoids OFF t oth ends of the two port vlves integrted N.C./N.O. self reset type (differentil pressure spring return). MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV Min prts list No. Prts nme Electric cover Coil ssemly Mnul cover Pilot lock Mnul override Connection key Check vlve Mteril PBT/PC - PBT PPS/PA POM POM PBT/UR No. 9 0 Prts nme Body Piston room ssemly Spool ssemly Port lock Crtridge type push-in joint Wiring connector ssemly Mteril Aluminum - Aluminum PA - LCP Reduced wiring lock mnifold, port pilot operted vlve

25 NE0 Series Reduced wiring lock mnifold (vlve lock); port vlve MNE0 MNE0 M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B Internl structure nd prts list port vlve NE00 -position single solenoid self reset type (differentil pressure spring return) (A) (B) (P) (R) NE00 -position doule solenoid self hold type (A) (B) (P) (R) F PVG/ PV/ MA/B0 PA/B F*0E QV QV NE00 -position ll ports closed (A) (B) (P) (R) NE00 -position A/B/R connection (A) (B) (P) (R) NE00 -position P/A/B connection (A) (B) (P) (R) 9 0 Min prts list No. Prts nme Mteril No. Prts nme Mteril Electric cover PBT/PC Check vlve PBT/UR Coil ssemly PPS/POM/PBT 9 Body Aluminum Coil dummy PPS 0 Piston room ssemly PPS/POM Mnul cover PBT Spool ssemly Aluminum Pilot lock PPS/PA Port lock PA Mnul override POM Crtridge type push-in joint - Connection key POM Wiring connector ssemly LCP

26 MNE0 Series Reduced wiring lock mnifold (supply nd exhust lock) Internl structure nd prts list Supply nd exhust lock NE0-Q Internl pilot MNE0 MNE0 M PR PA R P MN (P) (R) (Mster) W WGB NE0-QK Externl pilot PR PA R P MNS0 MNS0 TB L-/ / (PA) (P) SA/B0 (R) SA/B KA/B F NE0-QZ Multi-pressure circuit PVG/ PV/ PR PA R P (P) MA/B0 PA/B (R) NE0-QKZ PA/PR seprte type for externl pilot / (PA) / (PR) PR PA R P (P) (R) F*0E QV QV Min prts list No. Prts nme Supply nd exhust lock Wiring connector ssemly Check vlve Air supply filter Crtridge type push-in joint (min piping section) Crtridge type push-in joint (externl pilot piping) Mteril PA LCP UR SUS - - Reduced wiring lock mnifold, port pilot operted vlve 9

27 MNE0/MNE0 Series Reduced wiring lock mnifold (supply nd exhust lock) MNE0 MNE0 M Internl structure nd prts list Supply nd exhust lock NE0-QX Atmospheric relese type for internl pilot MN (Mster) PR PA R P (P) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B NE0-QKX Atmospheric relese type for externl pilot F PR PA R P PVG/ / (PA) (P) PV/ MA/B0 PA/B F*0E QV QV Min prts list No. Prts nme Supply nd exhust lock Wiring connector ssemly Check vlve Exhust filter Air supply filter Crtridge type push-in joint (min piping section) Crtridge type push-in joint (externl pilot piping section) Mteril PA LCP UR - SUS - - 0

28 Dimensions MN E0*-*-T0*-*-* D su-connector (T0) type MN E0-T0 Series Reduced wiring lock mnifold D su-connector type MNE0 MNE0 * The D su-connector cn e fced to the top or ottom. * Refer to pge for detils on chnging the connector direction (push-in joint ø) 0. (push-in joint ø). (-position) (M crtridge) Push-in joint ø, ø, fier tue, M crtridge (selection) (B) port Push-in joint ø, ø, fier tue, M crtridge (selection) (A) port Indictor light L L = (0 n) + (. m) +. (n: vlve lock sttion no., m: supply nd exhust lock no.) L = L -. Mnul override section Connection key * Refer to pge for the outline dimension drwings of the L type push-in joint for vlve lock (upwrd), L type push-in joint for ir fier joint nd supply/exhust lock (upwrd), nd type with individul power supply function (AUX) (push-in joint ø). (push-in joint ø) No. 0 Push-in joint ø, ø (selection) (R) port Push-in joint ø, ø (selection) (P) port 0. Prt nme Wiring lock T0 Vlve lock Supply nd exhust lock End lock M MN (Mster) W WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 MN E0*-*-T0R*-*-* D su-connector right type (T0R) Mnifold length L mm Mounting ril length L mm Mounting ril pitch L mm or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less (push-in joint ø) 0. (push-in joint ø). (-position)..9 (M crtridge). 0. Push-in joint ø, ø, fier tue M crtridge (selection) (B) port Push-in joint ø, ø, fier tue M crtridge (selection) (A) port. Indictor light Mnul override section 00 L= (0 n) + (. m) +. (n: vlve lock sttion no., m: supply nd exhust lock no.) L =L -... L Connection key (push-in joint ø). (push-in joint ø) 00.. No. Push-in joint ø, ø (selection) (R) port Push-in joint ø, ø (selection) (P) port. Prt nme End lock Vlve lock Supply nd exhust lock Wiring lock T0R. 0. PA/B F*0E QV QV Reduced wiring lock mnifold, port pilot operted vlve

29 MNE0 MNE0 M MN (Mster) W MN E0-T0 Series Reduced wiring lock mnifold; flt cle connector type Dimensions MN E0*-*-T0*-*-* Flt cle connector left type (T0)... * T, T nd T re lso ville. The outline dimensions re the sme s T0. Refer to pge for the connector dimensions. Indictor light Connection key Mnul override section WGB MNS0 MNS0 TB L-/ SA/B0 SA/B KA/B F PVG/ PV/ MA/B0 PA/B F*0E QV QV MN E0*-*-T0R*-*-* Flt cle connector right type (T0R) 9. (push-in joint ø) 0. (push-in joint ø).9 (M crtridge). (-position) Push-in joint ø, ø, fier tue, M crtridge (selection) (B) port Push-in joint ø, ø, fier tue M crtridge (selection) (A) port (push-in joint ø) 0. (push-in joint ø).9 (M crtridge).. (-position) 0.. L = (0 n) + (. m) +. (n: vlve lock sttion no., m: supply nd exhust lock no.) L = L -. L.. (push-in joint ø). (push-in joint ø) No. Push-in joint ø, ø (selection) (R) port Push-in joint ø, ø (selection) (P) port Prt nme Wiring lock T* Vlve lock Supply nd exhust lock End lock * Refer to pge for the outline dimension drwings of the L type push-in joint for vlve lock (upwrd), L type push-in joint for ir fier joint nd supply/exhust lock (upwrd). * The power supply connector cn e used with T0 to supply power to the PLC output unit. Refer to pge for dimensions when the connector is connected, nd to pge 9 for wiring methods nd precutions for wiring. Indictor light L= (0 n) + (. m) +. (n: vlve lock sttion no., m: supply nd exhust lock no.) L =L -. L Mnul override section Connection key.. 9. (push-in joint ø). (push-in joint ø) 0.9 No.. Prt nme End lock Vlve lock Supply nd exhust lock Wiring lock T0R Push-in joint ø, ø, fier tue M crtridge (selection) (B) port Push-in joint ø, ø, fier tue M crtridge (selection) (A) port Push-in joint ø, ø (selection) (R) port Push-in joint ø, ø (selection) (P) port Mnifold length L mm or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less Mounting ril length L mm Mounting ril pitch L mm

30 Dimensions Flt cle connector (TR/TR/TR): Connector section dimensions MN E0-TM Series Reduced wiring lock mnifold; intermedite nd right wiring lock * This drwing indictes connector type on the right. Connector type dimension on the left is lso the sme. MNE0 MNE0 TR TR TR M MN (Mster) W WGB MNS0 MNS0 TB MN E0*-*-TM A C*-*-* A RITS connector intermedite wiring specifictions (TM C) MN E0*-*-TM*-*-* 0 pin flt cle connector intermedite wiring specifictions (TM) L-/ SA/B0 SA/B KA/B F PVG/ PV/ AUX power input Connection key.. 9. Mnul override section MA/B0 PA/B TMC. 0 TM Mnifold length L mm or less Mounting ril length 00 L mm Mounting ril pitch. L mm or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less TMA (push-in joint ø) 0. (push-in joint ø) Push-in joint ø, ø, fier tue M crtridge (selection) (B) port Push-in joint ø, ø, fier tue M crtridge (selection) (A) port. L = (0 n) + (. m) +. (n: vlve lock sttion no., m: supply nd exhust lock no.) L=L L (push-in joint ø). (push-in joint ø). 00. No. Push-in joint ø, ø (selection) (R) port Push-in joint ø, ø (selection) (P) port Prt nme Intermedite wiring lock TMA Vlve lock Supply nd exhust lock End lock End lock. 0. F*0E QV QV Reduced wiring lock mnifold, port pilot operted vlve