MB-4 Chapters Monoblock Directional Control Valves

Size: px
Start display at page:

Download "MB-4 Chapters Monoblock Directional Control Valves"

Transcription

1 M-4 hapters Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34

2 M M-4 Specifications Nominal flow rate 60 l/min 6 US gpm Operating pressure (maximum) 35 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi Fluid temperature range with NR(UN-N) seals from - 20 to 80 from - 4 to 76 F with FM(VION) seal from - 20 to 00 from - 4 to 22 F operating range 2 from 5 to 75 mm /s from 5 to 75 cst Viscosity min 2 mm 2 /s 2 cst max. 400 mm 2 /s 400 cst mbient temperature range from - 40 to 60 from - 40 to 40 F ll specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. 5

3 M-4 M-4 / 2 - S -3 / 8 L / G - 4 / M3 ody kits Inlet relief (optional) Spool options "" side spool positioners (optional) "" side (optional) : ody kits WIHOU SERVIE OR VLVES RERRNGEMEN YE DESRIION - S section 2 - S 2 sections 3 - S 3 sections 4 - S 4 sections 5 - S 5 sections 6 - S 6 sections 2: Inlet Relief (optional) YE ODE DESRIION GE MG-2 YLM42002 Range 40 to 80 bar / 580 to 50 psi, standard setting 80 bar / 50 psi. MG-3 YLM42003 Range 63 to 200 bar / 900 to 2900 psi, standard setting 20 bar / 750 psi. MG-4 YLM42004 Range 60 to 35 bar / 2300 to 4600 psi, standard setting 220 bar / 3200 psi. SV YLM4200 Relief valve blanking plug. 6

4 M-4 3: Spool options YE ODE DESRIION GE YLM4300 Double acting, 3 positions, with, closed in neutral position. 2 2 YLM43002 Double acting, 3 positions, with, open to ank in neutral position. 2 3 YLM43003 Single acting on closed in neutral position, 3 positions, plugged. 3 4 YLM43004 Single acting on closed in neutral position, 3 positions, plugged. 3 5 YLM43005 Double acting, 3 positions, with open to ank in neutral position. 4 6 YLM43006 Double acting, 3 positions, with open to ank in neutral position. 4 7 YLM43007 Single acting on open to ank in neutral position, 3 positions, plugged. 5 8 YLM43008 Single acting on open to ank in neutral position, 3 positions, plugged. 5 9 YLM43009 Double acting, 3 positions, with,,, closed in neutral position (losed center). 6 0 YLM4300 Double acting, 3 positions, with, open to ank and, closed in neutral position (losed center). 6 5DY YLM43052 Double acting, 4 position, floating circuit in 4th position with, open to ank by pulling the lever. 7 5YX YLM4305 Double acting, 4 positions, floating circuit in 4th position with, open to ank by pushing. 7 the lever (with check valve) 5Y YLM4305 Double acting, 4 positions, floating circuit in 4th position with, open to ank by pushing the lever. 8 Z4 YLM4304 Double acting, 4 positions, regenerative circuit in 4th position with open to, by. 8 pulling the lever (Rest in pos. ) Z42 YLM43042 Double acting, 4 positions, regenerative circuit in 4th position with open to, by. 9 pulling the lever (Rest in pos. 0) 4: Side Spool ositioners YE ODE DESRIION GE 6- YLM4406 Detent in pos. -0-2, without spring centered YLM positions, detent in pos. 0-2, without spring centered YLM positions, detent in pos. -0, without spring centered. 23 8D2 YLM44200 With spring return to neutral position and pin with M8 male thread for dual control. 23 8E3 YLM44300 ON/OFF Electro-neumatic actuator YLM44080 ON/OFF neumatic actuator. 24 8MG (NO) YLM4480 Microswitch kit operated in pos. (Normally Open). 27 8MG2 (NO) YLM44802 Microswitch kit operated in pos. 2 (Normally Open). 27 8MG3 (NO) YLM44803 Microswitch kit operated in pos. &2 (Normally Open). 27 MG (NO) YLM44804 Microswitch with NO terminal. 27 8MG (N) YLM4480 Microswitch kit operated in pos. (Normally losed). 27 8MG2 (N) YLM44802 Microswitch kit operated in pos. 2 (Normally losed). 27 8MG3 (N) YLM44803 Microswitch kit operated in pos. &2 (Normally losed). 27 MG (N) YLM44804 Microswitch with N terminal YLM44008 With spring return to neutral position YLM positions, with spring centered from pos YLM positions, with spring centered from pos YLM4409 Detent in pos., 2 with spring centered YLM44092 Detent in pos. 2 with spring centered YLM44093 Detent in pos. with spring centered. 28 7

5 M-4 M-4 / 2 - S -3 / 8 L ody kits Inlet relief (optional) Spool options "" side spool positioners (optional) "" side (optional) / G - 4 / M : Side Spool ositioners YE ODE DESRIION GE 8ED3+RV-KER3 YLM4420 S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ED3+RV-KE2R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ED3+RV-KE3R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ED3+RV-KE4R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ED3+RV-KE5R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ED3+RV-KE6R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ER3+KES0 YLM4440 S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+KE2S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+KE3S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+KE4S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+KE5S0 YLM S:ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+KE6S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 5: Side (optional) YE ODE DESRIION GE L YLM45000 Standard lever box. 20 SL YLM4500 Without lever box, with dust-proof plate. 20 L YLM45002 Joystick lever for 2 section operation. 2 Q YLM45003 Flexible cable connection. 22 8

6 2 M-4 Dimensions X Y x ø Standard threads orts Inlet and Outlet and S G/2 G/2 G/2 UN-UNF 3/4-6 UNF-2 (SE 8) 3/4-6 UNF-2 (SE 8) 3/4-6 UNF-2 (SE 8) MERI M8x.5 M8x.5 M8x.5 Standard dimensions G-/2 : G4 G-3/8 : G3 G-3/4 : G6 SE 8: E8 SE 0: E0 SE 2: E2 SE 6: E6 YE X Y mm in mm in M4 /S M4 /2S M4 /3S M4 /4S M4 /5S M4 /6S

7 M-4 erformance curve chart t o ressure drop 40 ( b a r ) sections 4 sections 2 sections M4-6S M4-4S M4-2S Flow 80 (l/min) to () 6 ( b a r ) M4-6S ressure drop (6) () M4-S Flow 80 (l/min) () to ressure drop 20 ( b a r ) () 6(6) M4-6S M4-S Flow 80 (l/min) 0

8 M-4 Inlet Relief (Optional) ype MG Direct pressure relief valve: ype SV Relief valve blanking plug:

9 M-4 Spool Options YE 0 2 closed & & & close open closed YE closed & closed 0 2 open 0 2 closed 2

10 M-4 Spool Options YE 3 closed open 0 2 "" port plugged & & close open 0 2 "" port plugged 0 2 & closed "" port plugged YE 4 & closed 0 2 "" port plugged & & close open 0 2 "" port plugged closed open 0 2 "" port plugged 3

11 M-4 Spool Options YE closed & close 0 2 open 0 2 closed YE closed & closed 0 2 open 0 2 closed 4

12 M-4 Spool Options YE 7 closed 0 2 open "" port plugged closed 0 2 open "" port plugged & closed 02 "" port plugged YE 8 & closed 0 2 "" port plugged closed 0 2 open "" port plugged closed 02 open "" port plugged 5

13 M-4 Spool Options YE closed & & & closed closed closed YE closed & & close closed 6

14 M-4 Spool Options YE 5DY NOE: WIH SEIL ODY ND SEIL OSIIONER closed & & & closed open closed & closed open YE 5YX NOE: WIH SEIL ODY ND SEIL OSIIONER & closed open closed & & & closed open closed 7

15 M-4 Spool Options YE 5Y NOE: WIH SEIL ODY ND SEIL OSIIONER & closed open closed & & & closed open closed YE Z4 NOE: WIH SEIL ODY ND SEIL OSIIONER 0 23 closed Rest in pos. & & & closed open closed & & closed

16 M-4 Spool Options YE Z42 NOE: WIH SEIL ODY ND SEIL OSIIONER closed 0 23 & & & closed open Rest in pos closed & & closed

17 M-4 Side ype L ype L: SNDR LEVER KI ype R ype R: SNDR LEVER KI (ROED 80 DEGREE) 0 2 ype SL ø ype SL: WIHOU NY OVER ype SL ype SL: WIH DUS-ROOF LE

18 M-4 Side L: Joystick contorl ype L L L ype L L L

19 M-4 Side Note : ONNEION KI NO INLUDE LE able Q Kits ype Q M6x.0 M6x.5 Q Kit:

20 M-4 Side ype Kit: DEEN IN OS. -0-2, WIHOU SRING ENERED Kit: 2 OSIIONS, DEEN IN OS. 0-2, WIHOU SRING ENERED Kit: 2 OSIIONS, DEEN IN OS. -0, WIHOU SRING ENERED ype 8D M D2 Kit: WIH SRING REURN O NEURL OSIION ND IN WIH M8 MLE HRED FOR DUL ONROL 23

21 M-4 Side ype 8 V & V2 : N / V V V V2 Operating feature : ILO RESSURE (MIN.) R / 80 SI ILO RESSURE (MX.)... 0 R / 45 SI ype 8E ø V V V V Solenoid operating features : NOMINL VOLGE: 24VD NOMINL VOLGE OLERNE: 0% OWER RING: 5W 24

22 M-4 Side ype 8ED VR 2 2 VR VRE VRE V L Operating features : ILO RESSURE: MIN. 0 R / 45 SI MX. 50 R / 725 SI MX. KRESSURE ON DRIN L: 25 R / 360 SI oil features : NOMINL VOLGE OLERNE: 0% ELERI OWER: 2 W SNDRD VOLGE: 2 VD / 24 VD 25

23 M-4 Side ype 8ER L V V L V L Operating features : ILO RESSURE: MIN. 0 R / 45 SI MX. 50 R / 725 SI MX. KRESSURE ON DRIN L: 25 R / 360 SI oil features : NOMINL VOLGE OLERNE: 0% ELERI OWER: 2 W SNDRD VOLGE: 2 VD / 24 VD 26

24 M-4 Side ype 8MG 8MG Kit: 0 2 MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. 8MG2 Kit: 0 2 MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS MG3 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. ND OS With NO contact (female connector with male end) MIROSWIH Operating features : MEHNIL LIE: 5X0 5 OERIONS ELERIL LIE (RESISIVE LOD): 0 5 OERIONS - 7 / 3.5 VD 5x0 4 OERIONS - 0 / 2 VD 5x0 4 OERIONS - 3 / 28 VD With N contact (male connector with female end)

25 M-4 Side ype Kit: SRING REURN O NEURL OSIION Kit: 0 SRING REURN O NEURL OSIION. (2 OSIIONS) Kit: 0 2 SRING REURN O NEURL OSIION. (2 OSIIONS) ype Kit: DEEN IN OS., 2 WIH SRING ENERED Kit: DEEN IN OS. 2 WIH SRING ENERED Kit: DEEN IN OS. WIH SRING ENERED 28

26 M-4 Side (Optional controls) Electric wiring example 2 2 onnector onnector 2 (bar) (psi) 4500 oil features : NOMINL VOLGE OLERNE: 0% ELERI OWER: 36 W SNDRD VOLGE: 2 VD / 24 VD ressure Flow (l/min) ype 8ES Emergency manual override ES Kit: ING IN Emergency manual override ES2 Kit: ING IN 2 Emergency manual override Emergency manual override ES3 Kit: ING IN & 2 29

27 M-4 Side (Optional controls) oil features : NOMINL EL. OWER: 60 W LIMIS OF MIEN EMERURE : -20? +70? SNDRD VOLGE: 2-24 VD ( 0%) Electric wiring example 2 3 onnector o battery (bar) (psi) 4500 ressure Flow (l/min) ype 8ESN 20º 8ESNLES Kit: W 3 W ESNE Kit: W 3 W

28 M-4 Special spool (Options for 8ES Kit) ype 8ES3# 0 2 closed & & & closed open closed ype 8ES3#2 0 2 closed & closed 0 2 open 0 2 closed 3

29 M-4 Special spool (Options for 8ESN Kit) ype 8ESN# 0 2 closed & & & closed open closed ype 8ESN#2 0 2 closed & closed 0 2 open 0 2 closed 32

30 M-4 (Option - Dump valve (Emergency stop valve)) Electric wiring example oil features : NOMINL VOLGE OLERENE : ±0% ELERI OWER : 20W SNDRD VOLGE : 2VD / 24VD YE : ODE : DUM-G04-24VD(NO) DUM-G04-2VD(NO) YLM45424 YLM & : G/ YE : ODE : DUM-G04-24VD(N) YLM45424 DUM-G04-2VD(N) YLM

31 M-4 Outlet ower eyond onversion plug (losed center plug) 2 2 M8 2 2 M3 34

YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

YOULI HYDRAULIC INDUSTRIAL CO.,LTD. YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :

More information

45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit

45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar

More information

YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

YOULI HYDRAULIC INDUSTRIAL CO.,LTD. YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail

More information

MB-2 Chapters Monoblock Directional Control Valves

MB-2 Chapters Monoblock Directional Control Valves M-2 hapters Working condition.5 Ordering code.6 Dimensions.8 erformance data.9 Inlet relief options.1 Spool options.11 side options.14 side spool positioners.16 Inlet options.2 1 For Mobile nd Industrial

More information

Part Number Spool Qty Max Flow Max Pressure Ports. 80 lpm

Part Number Spool Qty Max Flow Max Pressure Ports. 80 lpm Monoblock Valves M5 Monoblock, 80 lpm, Max 315 ar art Number Spool Qty Max Flow Max ressure orts M5/1S3/18L/G4-6 ylinder 1 M5/2S3/18L/G4-6 ylinder 2 M5/3S3/18L/G4-6 ylinder 3 M5/4S3/18L/G4-6 ylinder 4

More information

YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

YOULI HYDRAULIC INDUSTRIAL CO.,LTD. YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH, IHUNG HSIEN, IWN 41468, RO. EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/

More information

CTSN-4 Content Sectional Directional Control Valves

CTSN-4 Content Sectional Directional Control Valves SN-4 ontent Specifications.5 Ordering code.7 Dimensions.12 erformance data.13 Inlet relief options.14 Spool options.15 side options.20 side spool positioners.23 ort relief.29 Outlet options.30 1 For Mobile

More information

YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

YOULI HYDRAULIC INDUSTRIAL CO.,LTD. YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail

More information

Hydro M t HYDRAULIC VALVES SN-4.

Hydro M t HYDRAULIC VALVES SN-4. Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control

More information

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.

More information

TESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE

TESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement

More information

DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>

DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN> DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.

More information

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed center hydraulic systems.. H Fitted with

More information

TESTO ITC KORINNA 28mm Allargato SECTIONAL DIRECTIONAL CONTROL VALVES

TESTO ITC KORINNA 28mm Allargato SECTIONAL DIRECTIONAL CONTROL VALVES ESO IC KORINN 8mm llargato SECIONL DIRECIONL CONROL VLVES SD6 - DLS7 SD6 Simple, compact and heavy duty designed sectional valve from to sections for open and closed center hydraulic systems. H Fitted

More information

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main

More information

MDT. Monoblock directional control valves MDT - Directional control valve

MDT. Monoblock directional control valves MDT - Directional control valve Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal

More information

Monoblock Directional Control Valve HDM11S/3PQ

Monoblock Directional Control Valve HDM11S/3PQ Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3

More information

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with

More information

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with

More information

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE rchivierung: 4/6 SD5 Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic

More information

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure

More information

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol

More information

p max (see table of performances) Q max (see table of performances) MD1K MD1KD bar

p max (see table of performances) Q max (see table of performances) MD1K MD1KD bar 41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional

More information

SECTIONAL DIRECTIONAL CONTROL VALVES

SECTIONAL DIRECTIONAL CONTROL VALVES SECIONL DIRECIONL CONROL VLVES SDS Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve and

More information

Umschaltventile Magnet

Umschaltventile Magnet Umschaltventile Magnet DFE 52/2 und DFE52/3 estellnr. Typ 25-1-1 DFE52/318ES-W1-12VDC 25-1-11 DFE52/318ES-W1-24VDC -1465 DFE52/318ES-Y1-12VDC -147 DFE52/318ES-Y1-24VDC Weitere Umschaltventil Varianten

More information

High Pressure, Subplate Mounted Directional Control Valves

High Pressure, Subplate Mounted Directional Control Valves ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple

More information

Pilot Operated Directional Valves

Pilot Operated Directional Valves ilot Operated Directional Valves Catalog DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) NF D10, ISO-4401-10,

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data

More information

HV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control

HV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:

More information

MONOBLOCK DIRECTIONAL CONTROL VALVE

MONOBLOCK DIRECTIONAL CONTROL VALVE MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 6 sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve

More information

High Pressure, Subplate Mounted Directional Control Valves

High Pressure, Subplate Mounted Directional Control Valves ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H03 5 gpm (19 L/min) nominal 10 000 psi (700 bar) H03 valves are rated for 5 gpm (19 L/min) nominal flow at pressures

More information

SDE030 SDE060. Directional control valves with direct acting solenoid

SDE030 SDE060. Directional control valves with direct acting solenoid SDE SDE Directional control valves with direct acting solenoid SDE-SDE General informations Simple, compact and heavy duty designed sectional valves from to sections. SDE luminium alloy inlet sections,

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional irectional Control Valves motion and progress 200--991210-N-03/09.2015 - - - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 Standard valves... p.101 Contents 8.1

More information

DIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures

DIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures HYD RULI DIREIONL O NROL VLVES VES omponents For he ontrol Of Wide Range Of Operating Flows nd ressures V, DV, ND RORY DIREIONL ONROL VLVES; FOR FLOWS U O 20 GM (76 LM) ND WORKING RESSURES U O 2,500 SIG

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances

More information

SDS400. Sectional directional control valve

SDS400. Sectional directional control valve SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over

More information

DFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...

DFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes... DFE Content Working conditions... 54 Hydraulic circuit... 55 DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes... 64 Positioner kits... 67 Solenoid parts... 68 Dimensional data... 69 Ordering codes...

More information

Available manual, pneumatic, and hydraulic spool control kits.

Available manual, pneumatic, and hydraulic spool control kits. Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,

More information

CONTROL VALVES

CONTROL VALVES - 1 CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool

More information

Directional Control Valve HDS21

Directional Control Valve HDS21 Directional Control Valve Reference: 2--991232-N-2 Issue: 3.218 1/64 Contents age 1 General information... 4 1.1 Introduction... 4 1.2 Directional valve installation... 1.3 Fittings... 1.4 Hydraulic fluid...

More information

Pilot Operated Directional Valves

Pilot Operated Directional Valves ilot Operated Directional Valves Catalog DG3V-8; 7 l/min (185 USgpm) 35 bar (5 psi) DG5V-8; 7 l/min (185 USgpm) 35 bar (5 psi) NF D8, ISO-441-8, CEO 8 Introduction General Description he Size 8 Directiona

More information

MONOBLOCK DIRECTIONAL CONTROL VALVES

MONOBLOCK DIRECTIONAL CONTROL VALVES MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL

More information

-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14

-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14 Auxiliary valves Document: SCV-1-June 2013 Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 2/14 -Circuit mode... 2/14 -Dimensions... 3/14 -Dimensions... 4/14 -Lever mechanism...

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICIONS D08H Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol

More information

油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189

油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189 ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with

More information

BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511

BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511 ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar

More information

Proportional Directional Valve System

Proportional Directional Valve System roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3

More information

4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve

4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series

More information

CONTROL VALVES

CONTROL VALVES - 1 CONROL VALVES resentación de la compañía HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool

More information

X-Series. Load-Sensing Sectional Control Block. Table of contents

X-Series. Load-Sensing Sectional Control Block. Table of contents X-Series Load-Sensing Sectional ontrol lock -6 Nominal pressure: 5076 psi (350 bar) Nominal flow rate l ump port: 66 gpm (250 l/min) l Working ports: 42 gpm (160 l/min) with compensator and load holding

More information

Monoblock directional control valves DL - Directional control valve

Monoblock directional control valves DL - Directional control valve Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal

More information

MONO-BLOCK DIRECTIONAL VALVE HDM 18 SERIES

MONO-BLOCK DIRECTIONAL VALVE HDM 18 SERIES Material specification: Standard features: Optional features available: Symbols: A/B H..C.O. RV 1 1 Weight CROSS HYDRAULICS Y LD YELLOW CAALOGUE age 2.45 HDM18/1 1 H..C.O. A B 1 RV HDM18/2/3/4 B B A A

More information

Directional Control Valve HDS34

Directional Control Valve HDS34 Directional Control Valve Load Sensing Reference: 2 991227 E Issue: 7.9 1/54 Contents age 1 General information................................................................ 4 1.1 Introductions..................................................................

More information

Solenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32

Solenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32 www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a

More information

B8_58 (EDBZ-VEI) RE Edition: Replaces:

B8_58 (EDBZ-VEI) RE Edition: Replaces: 4/3 Directional valve elements 8_58 with or without EDZ-VEI) secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 8_58 EDZ-VEI) RE 183-54 Edition: 2.216 Replaces:

More information

SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)

SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi) SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow

More information

CX3 SOLENOID OPERATING PROPORTIONAL CONTROL BANKABLE VALVES FEATURES ORDERING CODE HYDRAULIC SYMBOLS

CX3 SOLENOID OPERATING PROPORTIONAL CONTROL BANKABLE VALVES FEATURES ORDERING CODE HYDRAULIC SYMBOLS CX3 SOLENOID OERING ROORIONL CONROL NKLE VLVES CX3 series valves are used for controlling fluid direction and flow rate as a function of the supply current to the proportional control solenoid. he individual

More information

Directional Controls

Directional Controls Vickers Directional Controls ilot Operated Directional Valves DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000

More information

p max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60

p max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60 4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl

More information

Type : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil

Type : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil ype : V20 Nominal Flow : 80 LM Maximum Flow : 135 LM (36 GM) Max. ressure : 350 ar (5000 psi) Medium : Mineral Oil Introduction: VELJN V20M Mobile directional control valve is a segment type design that

More information

mechanical control valve

mechanical control valve DF Working conditions This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm /s -- 46 cst viscosity at 4 C temperature. DF5 DF DF DF5 N. of available ways --3--6

More information

IFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08

IFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08 IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through

More information

4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)

4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) 4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012

More information

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves motion and progress 1/220 6 Monobloc directional control valves Contents 6.1 General specifications 66 6.2 Dimensional data 67 6.3 Performances curves

More information

ORV-M45. Contents. Additional Informations

ORV-M45. Contents. Additional Informations Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners

More information

4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections

4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections 4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500

More information

Directional control valves NG6...NG32 D03...D10 6

Directional control valves NG6...NG32 D03...D10 6 Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI

More information

Direct Operated Proportional DC Valves

Direct Operated Proportional DC Valves echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable

More information

NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES

NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES Valve Series Page...... A 2 WALVOIL FRONT-END LOADER VALVES...

More information

MONOBLOCK DIRECTIONAL CONTROL VALVES

MONOBLOCK DIRECTIONAL CONTROL VALVES MONOBLOCK VALVE INDEX MONOBLOCK DIRECTIONAL CONTROL VALVES For mobile and industrial hydraulic applications. MA6 (6 GPM) General Specifications 4 Dimensions 5 Performance Chart 6 Ordering Code 7 MAV12

More information

SDS180 DLS180. Sectional directional control valve

SDS180 DLS180. Sectional directional control valve SDS8 DLS8 Sectional directional control valve SDS8/DLS8 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. Fitted with a main

More information

IFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07

IFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07 ILO OERED DIRECIONL VLVE SIZE NG-1 / CEO-7 Certifiction CE Certified -119115 1 ISO 91: FEURES : Highest performnce in NG 1 Optimized spool design to reduce flow force roven qulity through 1 million endurnce

More information

SECTION 1 Mobile Directional Control Valves

SECTION 1 Mobile Directional Control Valves SECION Mobile Directional Control Valves Make Model age Hydrocontrol Galtech ucher ucher Galtech Galtech Galtech Galtech Galtech Galtech ucher Cross Cross rince ucher ucher ucher ucher Hydrocontrol Hydrocontrol

More information

4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)

4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A) 4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating

More information

SDE030 SDE060. Directional control valves with direct acting solenoid

SDE030 SDE060. Directional control valves with direct acting solenoid SDE SDE6 Directional control valves with direct acting solenoid SDE-SDE6 Features Simle, comact and heavy duty designed sectional valve from to sections. Different tye of inlet covers. Different tyes of

More information

D07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:

D07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax: GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,

More information

Directional Control Valves Series D81V. General Description. Operation. Features. Specifications

Directional Control Valves Series D81V. General Description. Operation. Features. Specifications echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or

More information

Directional Control Valves. General Description. Operation. Features

Directional Control Valves. General Description. Operation. Features echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or

More information

Directional Control Valves. Features. Application. Operation

Directional Control Valves. Features. Application. Operation Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold

More information

Auxiliary valves. Lever. Spool positioner Check valve Spool

Auxiliary valves. Lever. Spool positioner Check valve Spool Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: DIRECIONL VLVE OERION Directional Valve Features, Selection and Operating Recommendations CONC INFORMION US Headquarters Dynex/Rivett Inc. 770 Capitol Drive ewaukee, WI 3072 U.S.. el: 262-69-2222 FX: 262-69-032

More information

IFP MRV03 RELIEF VALVE MODULE

IFP MRV03 RELIEF VALVE MODULE IF MRV03 RELIEF VLVE MODULE ISO4401-03 SIZE/NF D03 DJUSLE SNDRD MICROMEER KNO EXREMELY CISE CONROL WO SGE LNCE ISON FOUR RNGES VILLE LOW OVERRIDE MRV-03- MRV-03-W MRV-03- MRV-03- RELIEF MODULR VLVE SIZE

More information

Hyva Valves Introduction

Hyva Valves Introduction Introduction Hyva tipping valves Hyva offers a complete range of tipping valves to be used for different cylinder volumes. The T 0 & 00 valve can be used for flows up to 0 litre per minute. The pressure

More information

D3M Sectional valve technical catalogue 1st edition D3M.05

D3M Sectional valve technical catalogue 1st edition D3M.05 D3M Sectional valve ECHNICAL catalogue 1 st edition D3M.5 his catalogue shows the product in the most standard configurations. lease contact our Sales Dpt. for more detailed information or special requests.

More information

RPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15.

RPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15. REK-03 Modular Valve ssembly REK-03/ /0 D n 03 p max 50 bar (366 SI) Q max 60 l/min (5.8 GM) Compact modular valve system assembly Easy to build complex circuits he possibility of subsequent rebuilding

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves 200 P 991210 E 03 / 10.04 1/220 2 Monobloc directional control valves HDM140 Contents 2.1 General specifications 9 2.2 Dimensional data 10 2.3 Performances

More information

LUDV control block of sandwich plate design

LUDV control block of sandwich plate design LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar

More information

Directional Control Valve CV550

Directional Control Valve CV550 www.nimco-controls.com Directional Control Valve CV550 Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page

More information

DYNASET PRIORITY VALVE PV-SAE 3/4-1 1/4

DYNASET PRIORITY VALVE PV-SAE 3/4-1 1/4 DYNSE RIORIY VLVE V-SE 3/4 - /4 DYNSE RIORIY VLVES OF - SE SERIES RE ESECILLY DESIGNED O ENLE ESY ND RELILE INSLLION OF DYNSE HYDRULIC GENEROR O HYDRULIC SYSEM OF NY YE. DYNSE RIORIY VLVE ENLES O OERE

More information

Hydraulic Remote Control with STC Port Option Technical Focus

Hydraulic Remote Control with STC Port Option Technical Focus 2 2 3 4 2 Hydraulic Remote Control with SC ort Option echnical Focus HRC HRC2-2 HRC2-R HRC2-S HRC4-J able of Contents General Description...4 SC erformance Characteristics...5 How to Use...6 Operating

More information

Directional Control Valves. General Description. Operation. Features

Directional Control Valves. General Description. Operation. Features echnical Information Series D61VW General Series D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are

More information

EManually Operated Directional Valves

EManually Operated Directional Valves DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -

More information

6406 CONTROL VALVES. Polígono Indutrial O Rebullón s/n Mos - España -

6406 CONTROL VALVES. Polígono Indutrial O Rebullón s/n Mos - España - CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool

More information

DT (700 Series) Hydraulic Motor

DT (700 Series) Hydraulic Motor DT (700 Series) Hydraulic Motor shafts 45 60mm Tapered 47 2-1/4 Straight 16.0 [.631] 15.9 [.629] 10.0 [.395] 9.9 [.391] 35 [1.37] 7 [.29] *120 [4.73] 70 [2.75] 38.9 [1.530] 37.6 [1.480] 12.7 [.501] 12.7

More information

Directional Control Valves. Features. Application. Operation

Directional Control Valves. Features. Application. Operation Catalog HY14-2502/US Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage 4-way valves. hey are available in 2 or 3-

More information