COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
|
|
- Elizabeth Harrison
- 6 years ago
- Views:
Transcription
1 COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES
2 SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve. H Diameter mm in interchangeable spools. H Available manual, pneumatic, electro--hydraulic and remote with flexible cable spool control kits. Working conditions his catalog shows technical specifications and diagrams measured with mineral oil of 46 mm /s cst viscosity at 4 C --4 F temperature. Nominal flow rating l/min 3 US gpm Operating pressure (maximum) 5 bar 36 psi Back pressure (maximum) on outlet port 5 bar 36 psi Internal leakage A(B) p= bar - 45 psi fluid and valve at 4 C - 4 F 3cm 3 /min.8 in 3 /min Fluid Mineral base oil Fluid temperature range with NBR (BUNA -N) seals from -- to 8 C from -4 to 76 F with FM (VION) seals from -- to C from -4 to F Viscosity operating range from 5 to 75 mm /s from 5 to 75 cst min mm /s cst max 4 mm /s 4 cst Max level of contamination 9/6 -- ISO 446 NAS class Ambient temperature range from --4 to 6 C from -4 to 4 F NOE -- For different conditions please contact Sales Dept. Additional information his catalog shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information or special request. WARNING! All specifications of this catalog refer to the standard product at this date. Walvoil, oriented to a continuous improvement, reserves the right to discontinue, modify or revise the specifications, without notice. WALVOIL IS NO RESONSIBLE FOR ANY DAMAGE CAUSED BY AN INCORREC USE OF HE RODUC. 5 rd edition December : his edition supercedes all prior documents. DAC5A
3 SD4 Dimensional data osition 7.8 M osition 6 osition WALVOIL 5 MADE IN IALY WALVOIL 5 MADE IN IALY roduction batch : = production year () = progressive number Valve code Standard threads OR BS (ISO 8/) UN -UNF (ISO 96 -) Inlet A and B ports G 3/4 /6-- UN--B (SAE ) Outlet ILO ORS neumatic NF /8--7 NF /8--7 DAC5A 3
4 SD4 Hydraulic circuit Standard valve is supplied with positive overlap spool (C). AB 75 5 Ex.: SD4/(YG3--75)/C8L Right inlet A simmetrical body allows the reverse assembly of spool and relative control kit and lever (ED configuration). BA 75 5 Ex.: SD4/(YG3--75)/ED -C8L 4 DAC5A
5 SD4 erformance data (pressure drop vs. flow) Open center From inlet to outlet. A (bar) 5 3 (US gpm) 7 (psi) B ressure drop Flow (l/min) Inlet to work port From inlet to A port (spool in position ) orb port (spool in position ). A B ressure drop (bar) (US gpm) 7 (psi) Flow (l/min) Work port to outlet From A port (spool in position ) orb port (spool in position ) to outlet. A (bar) 5 3 (US gpm) 7 (psi) B ressure drop NOE -- Measured with spool type C. 5 5 Flow (l/min) DAC5A 5
6 SD4 Ordering codes Description example: SD4 / (YG3-75) / C 8 L - SAE * ressure relief valve setting in bar 4.. Body kits * YE CODE DESCRIION 5KC674 section Include boby, seals and rings. 8 I 6.. Inlet relief options YE CODE DESCRIION VMD/ direct pressure relief valve type Y (YG -5) 3XCAR Range 8 to 6 bar / 5 to 3 psi standard setting 5 bar / 8 psi (YG3-75) 3XCAR3 Range 5 to 5 bar / 8 to 36 psi standard setting 75 bar / 5 psi (YG4 -) 3XCAR4 Range to 35 bar / 9 to 46 psi standard setting bar / 3 psi VM/ pilot operated pressure relief valve type X (XG -5) X6 Range 5 to 35 bar / 36 to 46 psi standard setting 5 bar / 8 psi Standard setting is referred to l/min -.6 US gpm flow. 9B -B -B SV XA5634 Relief valve blanking plug 3. Spool options YE CODE CIRCUI DESCRIION C 3CU54 Double acting with positive overlap, 3 positions, A and B closed in neutral position N 3CU5 Double acting, 3 positions, A and B closed in neutral position 3CU556 Double acting, 3 positions, with A and B open to tank in neutral position 3C 3CU534 Single acting on A, 3 positions, B plugged requires SAE plug (see part I ) 4C 3CU5354 Single acting on B, 3 positions, A plugged requires SAE plug (see part I ) 6 3CU55 Double acting, 3 positions, closed center 7 3CU555 Double acting, 3 positions, closed center with A and B to tank in neutral position 8F 8EI3. K Y X SV NOE (*) -- Items are referred to UN- UNF thread. 6 DAC5A
7 SD4 Ordering codes II 5. L 4. A side spool positioners YE CODE DESCRIION 8 5V8 With spring return in neutral position 9B 5V9 With detent in position and spring return in neutral position B 5V9 With detent in position and spring return in neutral position 5V With detent in position, neutral and B 5V With detent in position and, spring return in neutral position 5 5V5 With detent in position and neutral 6 5V6 With detent in position and neutral 8F 5V875 roportional pneumatic kit 8EI3 5V835 VDC ON/OFF electro -hydraulic kit 5V835 4 VDC ON/OFF electro -hydraulic kit 3. SL 5. B side handle options YE CODE DESCRIION L 5LEV Standard lever box SL 5CO Without lever, with dust proof plate 5EL5 CG cable connection Q 5EL CD cable connection 6. Inlet and outlet selection * YE CODE DESCRIION SL 3XA83 SAE plug for side inlet and outlet (nr. plugs required). Standard configuration; SL must be omitted SA 3XA83 SAE plug for upper inlet and outlet (nr. plugs required) Q I ort plug * YE CODE DESCRIION SAE 3XA83 lug for single acting spool II Optional handlevers YE CODE DESCRIION AL/Mx 7 Lenght L = mm / 7.87in For special configurations see pages 9 and DAC5A 7
8 SD4 Spools options A B C A B A 3 B port plugged B 4 A B A B 6 7 A port plugged A side spool positioners N/ V V V V Operating features Adjustment range : from to 6.5 bar (9to94psi) diagram 5A Max.pilot pressure : bar (45 psi) 8F roportional pneumatic kit 5 6 Optional connector code: X Connection ISO L Solenoid operating features Nominal voltage : VDC / 4 VDC ower rating.. : W Duty cycle... : % V 9B B B Feeder kit (see catalogue SDS5 at page 3) V L EI3 ON/OFF electro--hydraulic kit 8 DAC5A
9 SD4 Special configurations Directional valve with rotary control kit max Standard body Optional handlever code: 3XGIU46 Angle excursion ± Stroke AB 75 5 Ex.: SD4/(YG3--75)/ NRSL Dust proof plate kit: code 5CO Rotary positionerl kit: code 5RO Spool: code 3CU556 (egative overlap) DAC5A 9
10 SD4 Special configurations Spool in regenerative 4 th position Special body kit: code 5KC635 5 osition osition 3 osition AB osition Ex.: SD4/(YG3--75)/ 8 3F L ositioner kit: code 5V36 Spool: code 3CU563 DAC5A
11 SD4 Installation and maintenance he SD4 valve is assembled and tested as per the technical specification of this catalog. Before the final installation on your equipment, follow the below recommendations: -- the valve can be assembled in any position, in order to prevent body deformation and spool sticking mount the product on a flat surface; -- in order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly on the valve; -- prior to painting, ensure plastic port plugs are tightly in place. A B Fitting tightening torque - Nm / lbft HREADS YE All ports BS (ISO 8/) G3/4 With O--Ring seal 9 / 66.4 With copper washer 6 / 44.3 With steel and rubber washer 7 / 5.6 UN--UNF (ISO 96--) /6--UN--B(SAE) With O--Ring seal 95 / 7 NOE -- hese torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and surface finish. he manufacturer shall be consulted. DAC5A
12 WALVOIL S..A. 4 REGGIO EMILIA IALY VIA ADIGE, 3/D EL FAX E -MAIL: INFO@WALVOIL.COM H: // SALES DEARMEN EL FAX D4988I DAC5A
COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief
More informationCOMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure
More informationCOMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main
More informationSDH Series. Monoblock and Sectional directional valves
SDH Series Monoblock and Sectional directional valves Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information
More informationTESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement
More informationSDS400. Sectional directional control valve
SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over
More informationORV-M45. Contents. Additional Informations
Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationHydro M t HYDRAULIC VALVES SN-4.
Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed center hydraulic systems.. H Fitted with
More informationUmschaltventile DF20/3. mit Hebel Bestellnr. Typ Code
Umschaltventile DF/3 Bestellnr. Typ Code mit Hebel 4-- DF/3AL 64 4-- DF/3A7L 6744 4-- DF/3A7SLP 64 4-- DF/3AT7SLP 64 4-- DF/3BC7CB 674 4-- DF/3AC7CA-TAP(A) 64 4--3 DF/3B7MEIA-TAP(B) 648 4--4 DF/3AMB 6
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More informationSECTIONAL DIRECTIONAL CONTROL VALVES
SECIONL DIRECIONL CONROL VLVES SDS Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve and
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with
More informationSDS180 DLS180. Sectional directional control valve
SDS8 DLS8 Sectional directional control valve SDS8/DLS8 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. Fitted with a main
More informationMonoblock Directional Control Valve HDM11S/3PQ
Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE rchivierung: 4/6 SD5 Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic
More informationDFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :
More informationSDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE Directional control valves with direct acting solenoid SDE-SDE General informations Simple, compact and heavy duty designed sectional valves from to sections. SDE luminium alloy inlet sections,
More informationPart Number Spool Qty Max Flow Max Pressure Ports. 80 lpm
Monoblock Valves M5 Monoblock, 80 lpm, Max 315 ar art Number Spool Qty Max Flow Max ressure orts M5/1S3/18L/G4-6 ylinder 1 M5/2S3/18L/G4-6 ylinder 2 M5/3S3/18L/G4-6 ylinder 3 M5/4S3/18L/G4-6 ylinder 4
More informationMONOBLOCK DIRECTIONAL CONTROL VALVE
MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 6 sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationTESTO ITC KORINNA 28mm Allargato SECTIONAL DIRECTIONAL CONTROL VALVES
ESO IC KORINN 8mm llargato SECIONL DIRECIONL CONROL VLVES SD6 - DLS7 SD6 Simple, compact and heavy duty designed sectional valve from to sections for open and closed center hydraulic systems. H Fitted
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances
More informationMB-4 Chapters Monoblock Directional Control Valves
M-4 hapters Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34 M-4 2 2
More informationMB-2 Chapters Monoblock Directional Control Valves
M-2 hapters Working condition.5 Ordering code.6 Dimensions.8 erformance data.9 Inlet relief options.1 Spool options.11 side options.14 side spool positioners.16 Inlet options.2 1 For Mobile nd Industrial
More information45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More informationmechanical control valve
DF Working conditions This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm /s -- 46 cst viscosity at 4 C temperature. DF5 DF DF DF5 N. of available ways --3--6
More informationHV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control
INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH, IHUNG HSIEN, IWN 41468, RO. EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/
More informationCTSN-4 Content Sectional Directional Control Valves
SN-4 ontent Specifications.5 Ordering code.7 Dimensions.12 erformance data.13 Inlet relief options.14 Spool options.15 side options.20 side spool positioners.23 ort relief.29 Outlet options.30 1 For Mobile
More informationUmschaltventile Magnet
Umschaltventile Magnet DFE 52/2 und DFE52/3 estellnr. Typ 25-1-1 DFE52/318ES-W1-12VDC 25-1-11 DFE52/318ES-W1-24VDC -1465 DFE52/318ES-Y1-12VDC -147 DFE52/318ES-Y1-24VDC Weitere Umschaltventil Varianten
More information-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14
Auxiliary valves Document: SCV-1-June 2013 Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 2/14 -Circuit mode... 2/14 -Dimensions... 3/14 -Dimensions... 4/14 -Lever mechanism...
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 6 Monobloc directional control valves Contents 6.1 General specifications 66 6.2 Dimensional data 67 6.3 Performances curves
More informationDirectional Control Valve HDS34
Directional Control Valve Load Sensing Reference: 2 991227 E Issue: 7.9 1/54 Contents age 1 General information................................................................ 4 1.1 Introductions..................................................................
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data
More informationD3M Sectional valve technical catalogue 1st edition D3M.05
D3M Sectional valve ECHNICAL catalogue 1 st edition D3M.5 his catalogue shows the product in the most standard configurations. lease contact our Sales Dpt. for more detailed information or special requests.
More information4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)
4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating
More informationAuxiliary valves. Lever. Spool positioner Check valve Spool
Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet
More informationElectric Proportional Pressure Reducing Valves Series ERP 03.ERP
Electric roportional ressure Reducing Valves Series ER 03.ER - 0912 Electric proportional pressure reducing valves SERIES ER Index of content: Description and main features: age 3 echnical data: age 4
More informationDirectional Control Valve HDS21
Directional Control Valve Reference: 2--991232-N-2 Issue: 3.218 1/64 Contents age 1 General information... 4 1.1 Introduction... 4 1.2 Directional valve installation... 1.3 Fittings... 1.4 Hydraulic fluid...
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves 200 P 991210 E 03 / 10.04 1/220 2 Monobloc directional control valves HDM140 Contents 2.1 General specifications 9 2.2 Dimensional data 10 2.3 Performances
More informationDFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...
DFE Content Working conditions... 54 Hydraulic circuit... 55 DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes... 64 Positioner kits... 67 Solenoid parts... 68 Dimensional data... 69 Ordering codes...
More information油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189
ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with
More information4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series
More informationNV452 Monoblock directional control valve
NV452 Monoblock directional control valve Product Features General Specifications Order Coding Open Center Load Sense Performance Data Inlet Options Spool Positioners Spool Options Auxilary Valves Lever
More information6/2 ways/positions flow diverters L (VS151-VS152-VS155)
6/2 ways/positions flow diverters L721... (VS151-VS152-VS155) RE 1832-5 Edition: 2.216 Replaces: 5.214 Size 6 Series 1 Maximum operating pressure 31 bar (45 psi) Maximum flow 6 l/min (15.85 gpm) Ports
More informationCONTROL VALVES
- 1 CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
More informationLine mounting From SAE08 to SAE16 cavities. 15 l/min (3.9 US gpm) from -20 C (-4 F) to 80 C (176 F) from -20 C (-4 F) to 100 C (212 F)
PU.. type flow control pressure compensated valves - ways Line mounting From SE to SE cavities Technical specifications and diagrams are measured with mineral oil of cst viscosity at C ( F) temperature.
More informationSECTION A FRONT END LOADER VALVES
NB: models, Codes and Specifications may be subject to change without notice. SECTION A FRONT END LOADER VALVES Valve Series Nominal PAGE WALVOIL FRONT-END LOADER VALVES SDM102 Series... 45L/Min... A 14
More informationNB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES
NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES Valve Series Page...... A 2 WALVOIL FRONT-END LOADER VALVES...
More information6/2 ways/positions flow diverters L (VS120-VS125-VS129)
6/2 ways/positions flow diverters L710... VS120-VS125-VS129) RE 18302-04 Edition: 05.2014 Replaces: 07.12 Size 4 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 25 l/min 6.6 gpm) Ports
More information6/2 ways/positions flow diverters
6/2 ways/positions flow diverters RE 18302-07/07.12 Replaces: 12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 140 l/min [36,98 gpm] Ports
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationLUDV control block of sandwich plate design
LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar
More informationRemote controls with flexible cables TECHNICAL CATALOG
Remote controls with flexible cables TECHNICAL CATALOG Remote controls Additional information This catalogue shows the product in the most standard configurations. Please contact our Sales Dpt. for more
More information3/2 ways/positions flow diverters L (VS91-VS92-VS95)
3/2 ways/positions flow diverters L706... (VS91-VS92-VS95) RE 18302-03 Edition: 04.2016 Replaces: 02.2016 Size 12 Series 00 Maximum operating pressure 310 bar (4500 psi) Maximum flow 140 l/min (36.98 gpm)
More informationCONTROL VALVES
- 1 CONROL VALVES resentación de la compañía HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional
More information6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 1832-5/12.9 1/8 L721... (VS151-VS152-VS155) Size 6 Series 1 Maximum
More informationHydraulic Remote Control with STC Port Option Technical Focus
2 2 3 4 2 Hydraulic Remote Control with SC ort Option echnical Focus HRC HRC2-2 HRC2-R HRC2-S HRC4-J able of Contents General Description...4 SC erformance Characteristics...5 How to Use...6 Operating
More informationSDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE6 Directional control valves with direct acting solenoid SDE-SDE6 Features Simle, comact and heavy duty designed sectional valve from to sections. Different tye of inlet covers. Different tyes of
More information4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)
4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012
More informationDirect Operated Proportional DC Valves
echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable
More informationDirectional Controls
Vickers Directional Controls Mechanical ctuators Directional Control Valves Directional Control Valves 310 bar (4500 psi) Flows to 114 l/min (30 USgpm) NF D05, ISO-4401-05 DG1V4-01**-10 Knob Operated DG17V4-01**-10
More informationB8_58 (EDBZ-VEI) RE Edition: Replaces:
4/3 Directional valve elements 8_58 with or without EDZ-VEI) secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 8_58 EDZ-VEI) RE 183-54 Edition: 2.216 Replaces:
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC VALVES SECTION 3A HYDRAULIC CONTROL VALVES MONOBLOCK DIRECTIONAL CONTROL VALVES...71 SLICE DIRECTIONAL CONTROL VALVES...73 HANDLEVERS...76 S additions for valves...76 VALVE CONTROL KITS additions
More informationContents. Directional Control Valve 3 Series CV 452. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves.
Contents Page 3-4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 General Information Technical data Performance Curves Dimensions - Basics Valve Dimensions - LS Valve Secondary
More information6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 18302-07/12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00
More informationV050 SERIES DIRECTIONAL CONTROL VALVE
V5 SERIES DIRECTIONAL CONTROL VALVE TAKE CONTROL Take control with Muncie Power Products V5 directional control valve. The V5 is constructed with high-grade iron castings and nickel-plated spools for use
More informationDMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Catalog HY-/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI DL8... C8-... Position, Way, N.C. Poppet,... Pull to Open.../8... /... DL... C-... Position, Way, N.C. Poppet,... Pull
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive
More informationVALVES HYDRAULIC SOLUTION SPECIALISTS DISCLAIMER
DISCLAIMER > All performance and specification figures are where possible taken from the latest documentation and may vary from older literature versions. > Product photos shown are indicative only. Actual
More information6 to 12/2 ways/positions bankable flow diverters flangeable
6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/07.12 Replaces: 12.09 1/8 L711... (VS120F-VS125F) Size 4 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 20
More informationWalvoil 2/2, 3/2, 6/2, 8/3 Wegeventile, elektromagnetisch Gruppe mehr als Qualität
2/2, 3/2, 6/2, 8/3 Wegeventile, elektromagnetisch mehr als Qualität DFE Contents Working conditions 48 Hydraulic circuit 49 DFE52 DFE1 DFE2 Dimensional data 53 Ordering codes 56 Positioner kits 59 Solenoid
More informationRemote controls with flexible cables
Remote controls with flexible cables Remote controls Additional information This catalogue shows the product in the most standard configurations. Please contact our Sales Dpt. for more detailed information
More informationDirectional Control Valve CV550
www.nimco-controls.com Directional Control Valve CV550 Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page
More informationGPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198
Transmission & Brake Spool Valves Screw-in style GPM PSI LPM BAR MODEL CAVITY PAGE 2 1000 8 70 TC-S3A 5/8-18 186 6 1000 23 70 TF-S3A 7/8-14 188 6 1000 23 70 TF-S3D 7/8-14 190 5 1000 20 70 TG-S4A 7/8-14
More information4-Way Directional Control With Pressure Compensated Flow Control PSDCF120M64LF Specifications:
Engineering & Manufacturing Solutions With Pressure Compensated Flow Control Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 6-1/2 lbs. (2.9 kg) 30 Micron filtration
More information6 to14/2 ways/positions bankable flow diverters flangeable
6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/07.12 Replaces: 12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F) Size 10 Series 00 Maximum operating pressure 310 bar [4500
More information3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
More information250 bar P max. Technical Features. Functional Description
Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations
More information4/3 Proportional directional valve elements L85P5 with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING
/ Proportional directional valve elements L8P with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING L8P (EDC-IP) RE 8- Edition:.6 Replaces: 7. Size 6 Series
More information4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK VALVE INDEX MONOBLOCK DIRECTIONAL CONTROL VALVES For mobile and industrial hydraulic applications. MA6 (6 GPM) General Specifications 4 Dimensions 5 Performance Chart 6 Ordering Code 7 MAV12
More information4/3 and 4/2 Proportional directional valve elements L8580 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING
/ and / Proportional directional valve elements L88 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING L88 (EDC-P) RE 181-9 Edition:.16 Replaces: 7.1 7.1 Size 6 Series Maximum operating pressure
More informationPressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
More information6 to 12/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/12.09 1/10 L711... (VS120F-VS125F)
More information3/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 3/2 ways/positions flow diverters RE 18302-02/12.09 1/8 L705... (VS81-VS82-VS84-VS85) Size 6 Series 00
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-8; 7 l/min (185 USgpm) 35 bar (5 psi) DG5V-8; 7 l/min (185 USgpm) 35 bar (5 psi) NF D8, ISO-441-8, CEO 8 Introduction General Description he Size 8 Directiona
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-09/12.09 1/10 L732... (VS241F-VS245F-VS246F-VS247F)
More informationproduct card NEW RELEASE HYDRAULIC REMOTE CONTROLS PATENT PENDING E TM
product card NEW RELEASE HYDRAULIC REMOE CONROLS AEN ENDING E0.09.0302.02.00 M ALICAIONS: he serie has been designed to control the servopilot hydraulic circuit of directional control valves, hydrostatic
More informationContents. Directional Control Valve 2 Series CV 300
Contents Page 3 General Information Page 4 Technical data Page 5 Dimensions Page 6 Secondary Valves Page 7 Cylinder port mounted secondary valves Page8 Spool - Control characteristics Page 9-10 Spool Controls
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More information