YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

Size: px
Start display at page:

Download "YOULI HYDRAULIC INDUSTRIAL CO.,LTD."

Transcription

1 YOULI HYDRULI INDUSRIL O.,LD OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH, IHUNG HSIEN, IWN 41468, RO. EL : FX : sales@tw-youli.com.tw OY RIGHS RESERVED 7.21 / E/S-Sunway ISO 91:2 Q792 YOULI HYDRULI INDUSRIL O.,LD.

2 SN-4 hapters Sectional Directional ontrol Valves Working condition.5 Ordering code.7 Dimensions.12 erformance data.13 Inlet relief options.14 Spool options.15 side options.2 side spool positioners.23 ort relief.29 Outlet options.3 1

3 For Mobile nd Industrial Hydraulic pplications. MONOLOK DIREIONL ONROL VLVES M-2 / M-3 / M-4 / M-5 / MS-5 SEIONL DIREIONL ONROL VLVES SN-3 / SN-4 / SN-6 M-2 ONLY ONE SEION VILLE MS-5 VILLE SEIONS FROM 1 O 6 With Independent load check valve in each section, and optional port relief. Nominal flow rate 45 l/min 12 US gpm Operating pressure (maximum) 25 bar 36 psi ack pressure (maximum) on outlet port 25 bar 36 psi Nominal flow rate 8 l/min 21 US gpm Operating pressure parallel or tandem circuit 315 bar 46 psi (maximum) series circuit 25 bar 36 psi ack pressure (maximum) on outlet port 25 bar 36 psi M-3 VILLE SEIONS FROM 1 O 6 SN-3 VILLE SEIONS FROM 1 O 12 Nominal flow rate 45 l/min 12 US gpm Operating pressure parallel or tandem circuit 315 bar 46 psi (maximum) series circuit 21 bar 35 psi ack pressure (maximum) on outlet port 25 bar 36 psi Nominal flow rate 5 l/min 13 US gpm Operating pressure parallel or tandem circuit 315 bar 46 psi (maximum) series circuit 21 bar 35 psi ack pressure (maximum) on outlet port 25 bar 36 psi M-4 VILLE SEIONS FROM 1 O 6 SN-4 VILLE SEIONS FROM 1 O 12 Nominal flow rate 6 l/min 16 US gpm Operating pressure parallel or tandem circuit 315 bar 46 psi (maximum) series circuit 21 bar 35 psi ack pressure (maximum) on outlet port 25 bar 36 psi Nominal flow rate 8 l/min 21 US gpm Operating pressure parallel or tandem circuit 315 bar 46 psi (maximum) series circuit 21 bar 35 psi ack pressure (maximum) on outlet port 25 bar 36 psi M-5 VILLE SEIONS FROM 1 O 6 SN-6 VILLE SEIONS FROM 1 O 12 Nominal flow rate 8 l/min 21 US gpm Operating pressure parallel or tandem circuit 315 bar 46 psi (maximum) series circuit 25 bar 36 psi ack pressure (maximum) on outlet port 25 bar 36 psi Nominal flow rate 14 l/min 37 US gpm Operating pressure parallel or tandem circuit 315 bar 46 psi (maximum) series circuit 21 bar 35 psi ack pressure (maximum) on outlet port 25 bar 36 psi 2 3

4 SN-4 Sectional Directional ontrol Valves Innovative Designs rofessional Quality ustomer Satisfaction! VILLE SEIONS FROM 1 O SN-4 Sectional Directional ontrol Valves SN-4 Specifications Nominal flow rate 8 l/min 21 US gpm Operating pressure (maximum) parallel or tandem circuit 315 bar 46 psi series circuit 21 bar 35 psi ack pressure (maximum) on outlet port 25 bar 36 psi Fluid temperature range with NR(UN-N) seals from - 2 to 8 from - 4 to 176 F with FM(VION) seal from - 2 to 1 from - 4 to 212 F operating range from 15 to 75 mm 2 /s from 15 to 75 cst Viscosity min 12 mm 2 /s 12 cst max. 4 mm 2 /s 4 cst mbient temperature range from - 4 to 6 from - 4 to 14 F ll specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice

5 SN-4 omplete Sectional Directional ontrol Valves SN-4 Inlet Section Sectional Directional ontrol Valves HOW O ORDER FOR OMEE SSEMLED VLVE F SN-4 / SG-3 / G4 SN-4 / 2S - 3 / 18L / 28L / G-4-6 / M3 2S No. of working section 3 Inlet cover with a main pressure relief valve 18L 28L G-4-6 M3 1st section (complete working section) Following section (complete working section) S ports Outlet cover Inlet relief (optional) Inlet Relief (optional) YE ODE DESRIION GE SG-2 YLSN432 Range 8 to 16 bar / 115 to 23 psi, standard setting 125 bar / 18 psi. 14 SG-3 YLSN433 Range 125 to 25 bar / 18 to 36 psi, standard setting 175 bar / 25 psi. 14 SG-4 YLSN434 Range 2 to 315bar / 29 to 46 psi, standard setting 22 bar / 32 psi. 14 Standard setting is referred to 1 l/min US gpm flow.. 14 SV YLSN44 Relief valve blanking plug. 14 XSG YLX21 ilot operated pressure relief valve Range 25 to 315 bar/ 36 to 46 psi, standard setting 125 bar/ 18 psi

6 SN-4 Outlet Section Sectional Directional ontrol Valves SN-4 Working Section Sectional Directional ontrol Valves F SN-4 / G-6 / M3 EW SN-4 / 1S / 1 8 L / 1(G3-1) / G Spool symbol "" side Spool positioners "" side (optional) ort relief (optional) 1: Spool Symbol YE ODE DESRIION GE 1 YLWSN421 Double acting,3 positions,with and closed in neutral position. 15 1S YLWSN421 Double acting,3 positions,with and closed in neutral position, for series circuit YLWSN422 Double acting,3 positions,with and open to tank in neutral position YLWSN423 Single acting on closed in neutral position, 3 positions, plugged YLWSN424 Single acting on closed in neutral position, 3 positions, plugged YLWSN425 Double acting, 3 positions, with open to ank in neutral position YLWSN426 Double acting, 3 positions, with open to ank in neutral position. 17 5Y YLWSN4351 Double acting, 4 positions, floating circuit in 4th position with, open to ank by pushing the lever

7 SN-4 Working Section Sectional Directional ontrol Valves 2: Side Spool ositioners YE ODE DESRIION GE 8ED3+RV-KE1R3 YLWSN4321 1S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE2R3 YLWSN4322 2S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE3R3 YLWSN4323 3S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 EW SN-4 / 1S / 1 8 L / 1(G3-1) / G ED3+RV-KE4R3 YLWSN4324 4S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE5R3 YLWSN4325 5S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE6R3 YLWSN4326 6S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE7R3 YLWSN4327 7S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD) Spool symbol "" side Spool positioners "" side (optional) ort relief (optional) 8ED3+RV-KE8R3 YLWSN4328 8S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE9R3 YLWSN4329 9S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE1R3 YLWSN4321 1S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE11R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE12R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ER3+RV-KE1S YLWSN4341 1S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE2S YLWSN4342 2S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE3S YLWSN4343 3S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE4S YLWSN4344 4S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE5S YLWSN4345 5S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE6S YLWSN4346 6S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE7S YLWSN4347 7S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE8S YLWSN4348 8S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE9S YLWSN4349 9S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE1S YLWSN4341 1S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE11S YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE12S YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 2: Side Spool ositioners YE ODE DESRIION GE 6-1 YLWSN4361 Detent in pos. 1--2, without spring centered YLWSN positions, detent in pos. -2, without spring centered YLWSN positions, detent in pos. 1-, without spring centered. 23 8D2 YLWSN4382 With spring return to neutral position and pin with M8 male thread for dual control YLWSN438 ON/OFF neumatic actuator. 24 8E3 YLWSN443 ON/OFF Electro-neumatic actuator. 24 8MG1 (NO) YLWSN4381 Microswitch kit operated in pos. 1 (Normally Open). 27 8MG2 (NO) YLWSN4382 Microswitch kit operated in pos. 2 (Normally Open). 27 8MG3 (NO) YLWSN4383 Microswitch kit operated in pos. 1&2 (Normally Open). 27 MG (NO) YLWSN4384 Microswitch with NO terminal. 27 8MG1 (N) YLWSN43811 Microswitch kit operated in pos. 1 (Normally losed). 27 8MG2 (N) YLWSN43821 Microswitch kit operated in pos. 2 (Normally losed). 27 8MG3 (N) YLWSN43831 Microswitch kit operated in pos. 1&2 (Normally losed). 27 MG (N) YLWSN43841 Microswitch with N terminal YLWSN438 With spring return to neutral position YLWSN positions, with spring centered from pos YLWSN positions, with spring centered from pos YLWSN4391 Detent in pos. 1, 2 with spring centered YLWSN4392 Detent in pos. 2 with spring centered YLWSN4393 Detent in pos. 1 with spring centered. 28 3: Side (Optional) YE ODE DESRIION GE L YLWSN44 Steandard lever. 2 SL YLWSN441 Without lever, with dust proof plate. 2 L YLWSN442 Joystick lever for 2 section operation. 21 Q YLWSN443 Flexible cable connection. 22 4: ort Relief (Optional) YE ODE DESRIION GE (G2-63) YLWSN452 nti-shock valve, range 63 to 125 bar / form 9 to 18 psi standard setting 63 bar / 9 psi. 29 (G3-1) YLWSN453 nti-shock valve, range 1 to 25 bar / form 145 to 36 psi standard setting 1bar / 145 psi. 29 (G4-2) YLWSN454 nti-shock valve, range 2 to 315 bar / form 29 to 46 psi standard setting 2 bar / 29 psi. 29 M (G2-63) YLWSN455 nti-shock valve, range 63 to 125 bar / form 9 to 18 psi standard setting 63 bar / 9 psi, for low setting. 29 U (G2-63) YLWSN4512 nti-shock valve and nti-cavitation valve, range 63 to 125 bar / form 9 to 18 psi standard setting 63 bar / 9 psi. 29 U (G3-1) YLWSN4513 nti-shock valve and nti-cavitation valve, range 1 to 25 bar / form 145 to 36 psi standard setting 1 bar / 145 psi. 29 U (G4-2) YLWSN4514 nti-shock valve and nti-cavitation valve, range 2 to 315 bar / form 29 to 46 psi standard setting 2 bar / 29 psi. 29 YLWSN451 nti - cavitation

8 SN-4 Dimensions Sectional Directional ontrol Valves SN-4 erformance urve hart Sectional Directional ontrol Valves Standard threads X 6.54 Y xM8 orts Inlet and and Outlet ilot ports Hydraulic neumatic carry-over S G1/2 G1/2 G3/4 S G1/4 NF 1/8-27 UN-UNF /8-14 UNF-2 3/4-16 UNF-2 7/8-14 UNF-2 9/16-18 UNF-2 UN-UNF (SE 1) (SE 8) (SE 1) (SE 6) NF 1/8-27 MERI M22x1.5 M22x1.5 M22x1.5 MERI G1/4 NF 1/8-27 YE Standard dimensions X Y mm in mm in SN4 /1S SN4 /2S SN4 /3S YE G-1/2 : G4 G-3/8 : G3 G-3/4 : G6 SE 8: E8 SE 1: E1 SE 12: E12 SE 16: E16 X Y mm in mm in SN4 /7S SN4 /8S SN4 /9S ressure drop ressure drop ressure drop 2 (bar) (bar) (bar) to Flow (l/min) to () Flow (l/min) () to 12 sections 8 sections 4 sections 1 sections 12(12) 1(1) 1(1) 12(12) 27 (psi) (psi) (psi) 18 9 SN4 /4S SN4 /5S SN4 /6S SN4 /1S SN4 /11S SN4 /12S Flow (l/min) 12 13

9 SN-4 Inlet Relief (Optional) Sectional Directional ontrol Valves SN-4 Spool Options Sectional Directional ontrol Valves ype SG YE 1 Direct pressure relief valve: ø closed & & & closed open ype XSG ilot operated pressure relief valve: closed ø Max YE 2 ype SV Relief valve blanking plug: closed ø & closed open closed 14 15

10 SN-4 Spool Options Sectional Directional ontrol Valves SN-4 Spool Options Sectional Directional ontrol Valves YE 3 YE 5 closed "" port plugged closed & closed open "" port plugged & closed open closed open "" port plugged closed YE 4 YE 6 closed open "" port plugged closed & closed open "" port plugged & closed open closed "" port plugged closed 16 17

11 SN-4 Spool Options Sectional Directional ontrol Valves SN-4 Spool Options Sectional Directional ontrol Valves YE 1S YE 5Y NOE : WIH SEIL ODY ND SEIL OSIIONER. & closed 3 closed "" port plugged open & & & closed open "" port plugged closed 3 closed "" port plugged & & & closed open 3 3 closed 18 19

12 SN-4 SN-4 Side Sectional Directional ontrol Valves Side Sectional Directional ontrol Valves ype L L: Joystick contorl 2 ype L: SNDR LEVER KI ype SL ype SL: WIH DUS-ROOF LE ype L L L L L ype L

13 SN-4 Side Sectional Directional ontrol Valves SN-4 Side Sectional Directional ontrol Valves ype 6 Note : Q KI NO INLUDE LE 6-1 Kit: DEEN IN OS. 1--2, WIHOU SRING ENERED able 6-2 Kit: Q Kits 2 2 OSIIONS, DEEN IN OS. -2, WIHOU SRING ENERED Kit: 1 2 OSIIONS, DEEN IN OS. 1-, WIHOU SRING ENERED ype 8D2 ype Q M8 8D2 Kit: WIH SRING REURN O NEURL OSIION ND IN WIH M8 MLE HRED FOR DUL ONROL M6 M16 Q Kit:

14 SN-4 Side Sectional Directional ontrol Valves SN-4 Side Sectional Directional ontrol Valves ype 8 ype 8ED3 V1 & V2 : N 1/8-27 ROX VR Hydraulic circuit V1 V V1 V VRE ilot pressure : FROM 7 O 1 R / 11 O 145 SI VR valve operating features : OULE RESSURE: 25 R / 363 SI MX. FLOW: 8 L/MIN / 2.1 US GM FLERING: 8 μ ype 8E V1 V ø V1 V V L Solenoid operating features : NOMINL VOLGE: 24VD NOMINL VOLGE OLERNE: 1% OWER RING: 5W Operating features : ILO RESSURE: MIN. 1 R / 145 SI MX. 5 R / 725 SI MX. KRESSURE ON DRIN L: 25 R / 36SI Solenoid operating features : NOMINL VOLGE: 12VD / 24 VD OWER RING: 21 W DUY YLE: 1 % 24 25

15 SN-4 Side Sectional Directional ontrol Valves SN-4 Side Sectional Directional ontrol Valves ype 8ER3 ype 8MG MG1 Kit: V L MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. 1 8MG2 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS MG3 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. 1 ND OS With NO contact (female connector with male end) MIROSWIH Operating features : MEHNIL LIE: 5X1 5 OERIONS ELERIL LIE (RESISIVE LOD): 1 5 OERIONS - 7 / 13.5 VD 5x1 4 OERIONS - 1 / 12 VD 5x1 4 OERIONS - 3 / 28 VD With N contact (male connector with female end) V L Operating features : ILO RESSURE: MIN. 1 R / 145 SI MX. 5 R / 725 SI MX. KRESSURE ON DRIN L: 25 R / 36SI Solenoid operating features : NOMINL VOLGE: 12VD / 24 VD OWER RING: 21 W DUY YLE: 1 %

16 SN-4 Side Sectional Directional ontrol Valves SN-4 ort Relief Sectional Directional ontrol Valves ype 8 YE 8 Kit: SRING REURN O NEURL OSIION Kit: 1 SRING REURN O NEURL OSIION. (2 OSIIONS) YE Kit: SRING REURN O NEURL OSIION. (2 OSIIONS) ype 9 YE M Kit: DEEN IN OS. 1, 2 WIH SRING M1 M2 M3 ENERED Kit: DEEN IN OS. 2 WIH SRING ENERED YE U Kit: U1 U2 U3 DEEN IN OS. 1 WIH SRING ENERED 28 29

17 Memo SN-4 Outlet Sectional Directional ontrol Valves ower eyond onversion plug (losed center plug) M M3 3 31

18 Memo 32

YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

YOULI HYDRAULIC INDUSTRIAL CO.,LTD. YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail

More information

CTSN-4 Content Sectional Directional Control Valves

CTSN-4 Content Sectional Directional Control Valves SN-4 ontent Specifications.5 Ordering code.7 Dimensions.12 erformance data.13 Inlet relief options.14 Spool options.15 side options.20 side spool positioners.23 ort relief.29 Outlet options.30 1 For Mobile

More information

YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

YOULI HYDRAULIC INDUSTRIAL CO.,LTD. YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail

More information

YOULI HYDRAULIC INDUSTRIAL CO.,LTD.

YOULI HYDRAULIC INDUSTRIAL CO.,LTD. YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :

More information

MB-2 Chapters Monoblock Directional Control Valves

MB-2 Chapters Monoblock Directional Control Valves M-2 hapters Working condition.5 Ordering code.6 Dimensions.8 erformance data.9 Inlet relief options.1 Spool options.11 side options.14 side spool positioners.16 Inlet options.2 1 For Mobile nd Industrial

More information

45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit

45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar

More information

Part Number Spool Qty Max Flow Max Pressure Ports. 80 lpm

Part Number Spool Qty Max Flow Max Pressure Ports. 80 lpm Monoblock Valves M5 Monoblock, 80 lpm, Max 315 ar art Number Spool Qty Max Flow Max ressure orts M5/1S3/18L/G4-6 ylinder 1 M5/2S3/18L/G4-6 ylinder 2 M5/3S3/18L/G4-6 ylinder 3 M5/4S3/18L/G4-6 ylinder 4

More information

MB-4 Chapters Monoblock Directional Control Valves

MB-4 Chapters Monoblock Directional Control Valves M-4 hapters Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34 M-4 2 2

More information

Hydro M t HYDRAULIC VALVES SN-4.

Hydro M t HYDRAULIC VALVES SN-4. Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control

More information

油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189

油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189 ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with

More information

TESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE

TESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement

More information

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main

More information

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.

More information

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional

More information

TESTO ITC KORINNA 28mm Allargato SECTIONAL DIRECTIONAL CONTROL VALVES

TESTO ITC KORINNA 28mm Allargato SECTIONAL DIRECTIONAL CONTROL VALVES ESO IC KORINN 8mm llargato SECIONL DIRECIONL CONROL VLVES SD6 - DLS7 SD6 Simple, compact and heavy duty designed sectional valve from to sections for open and closed center hydraulic systems. H Fitted

More information

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed center hydraulic systems.. H Fitted with

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................

More information

Monoblock Directional Control Valve HDM11S/3PQ

Monoblock Directional Control Valve HDM11S/3PQ Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3

More information

DIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures

DIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures HYD RULI DIREIONL O NROL VLVES VES omponents For he ontrol Of Wide Range Of Operating Flows nd ressures V, DV, ND RORY DIREIONL ONROL VLVES; FOR FLOWS U O 20 GM (76 LM) ND WORKING RESSURES U O 2,500 SIG

More information

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with

More information

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief

More information

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with

More information

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE

TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE rchivierung: 4/6 SD5 Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic

More information

High Pressure, Subplate Mounted Directional Control Valves

High Pressure, Subplate Mounted Directional Control Valves ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple

More information

High Pressure, Subplate Mounted Directional Control Valves

High Pressure, Subplate Mounted Directional Control Valves ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H03 5 gpm (19 L/min) nominal 10 000 psi (700 bar) H03 valves are rated for 5 gpm (19 L/min) nominal flow at pressures

More information

MDT. Monoblock directional control valves MDT - Directional control valve

MDT. Monoblock directional control valves MDT - Directional control valve Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal

More information

DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>

DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN> DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.

More information

SECTIONAL DIRECTIONAL CONTROL VALVES

SECTIONAL DIRECTIONAL CONTROL VALVES SECIONL DIRECIONL CONROL VLVES SDS Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve and

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol

More information

p max (see table of performances) Q max (see table of performances) MD1K MD1KD bar

p max (see table of performances) Q max (see table of performances) MD1K MD1KD bar 41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional irectional Control Valves motion and progress 200--991210-N-03/09.2015 - - - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 Standard valves... p.101 Contents 8.1

More information

MONOBLOCK DIRECTIONAL CONTROL VALVE

MONOBLOCK DIRECTIONAL CONTROL VALVE MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 6 sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data

More information

X-Series. Load-Sensing Sectional Control Block. Table of contents

X-Series. Load-Sensing Sectional Control Block. Table of contents X-Series Load-Sensing Sectional ontrol lock -6 Nominal pressure: 5076 psi (350 bar) Nominal flow rate l ump port: 66 gpm (250 l/min) l Working ports: 42 gpm (160 l/min) with compensator and load holding

More information

HV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control

HV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:

More information

SDS400. Sectional directional control valve

SDS400. Sectional directional control valve SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over

More information

Proportional Directional Valve System

Proportional Directional Valve System roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances

More information

-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14

-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14 Auxiliary valves Document: SCV-1-June 2013 Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 2/14 -Circuit mode... 2/14 -Dimensions... 3/14 -Dimensions... 4/14 -Lever mechanism...

More information

Available manual, pneumatic, and hydraulic spool control kits.

Available manual, pneumatic, and hydraulic spool control kits. Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,

More information

Umschaltventile Magnet

Umschaltventile Magnet Umschaltventile Magnet DFE 52/2 und DFE52/3 estellnr. Typ 25-1-1 DFE52/318ES-W1-12VDC 25-1-11 DFE52/318ES-W1-24VDC -1465 DFE52/318ES-Y1-12VDC -147 DFE52/318ES-Y1-24VDC Weitere Umschaltventil Varianten

More information

Pilot Operated Directional Valves

Pilot Operated Directional Valves ilot Operated Directional Valves Catalog DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) NF D10, ISO-4401-10,

More information

MONOBLOCK DIRECTIONAL CONTROL VALVES

MONOBLOCK DIRECTIONAL CONTROL VALVES MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL

More information

CONTROL VALVES

CONTROL VALVES - 1 CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool

More information

Directional Control Valve HDS21

Directional Control Valve HDS21 Directional Control Valve Reference: 2--991232-N-2 Issue: 3.218 1/64 Contents age 1 General information... 4 1.1 Introduction... 4 1.2 Directional valve installation... 1.3 Fittings... 1.4 Hydraulic fluid...

More information

MONO-BLOCK DIRECTIONAL VALVE HDM 18 SERIES

MONO-BLOCK DIRECTIONAL VALVE HDM 18 SERIES Material specification: Standard features: Optional features available: Symbols: A/B H..C.O. RV 1 1 Weight CROSS HYDRAULICS Y LD YELLOW CAALOGUE age 2.45 HDM18/1 1 H..C.O. A B 1 RV HDM18/2/3/4 B B A A

More information

Type : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil

Type : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil ype : V20 Nominal Flow : 80 LM Maximum Flow : 135 LM (36 GM) Max. ressure : 350 ar (5000 psi) Medium : Mineral Oil Introduction: VELJN V20M Mobile directional control valve is a segment type design that

More information

CONTROL VALVES

CONTROL VALVES - 1 CONROL VALVES resentación de la compañía HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool

More information

SDE030 SDE060. Directional control valves with direct acting solenoid

SDE030 SDE060. Directional control valves with direct acting solenoid SDE SDE Directional control valves with direct acting solenoid SDE-SDE General informations Simple, compact and heavy duty designed sectional valves from to sections. SDE luminium alloy inlet sections,

More information

Directional Control Valve HDS34

Directional Control Valve HDS34 Directional Control Valve Load Sensing Reference: 2 991227 E Issue: 7.9 1/54 Contents age 1 General information................................................................ 4 1.1 Introductions..................................................................

More information

4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)

4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) 4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012

More information

Monoblock directional control valves DL - Directional control valve

Monoblock directional control valves DL - Directional control valve Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal

More information

DFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...

DFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes... DFE Content Working conditions... 54 Hydraulic circuit... 55 DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes... 64 Positioner kits... 67 Solenoid parts... 68 Dimensional data... 69 Ordering codes...

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: DIRECIONL VLVE OERION Directional Valve Features, Selection and Operating Recommendations CONC INFORMION US Headquarters Dynex/Rivett Inc. 770 Capitol Drive ewaukee, WI 3072 U.S.. el: 262-69-2222 FX: 262-69-032

More information

Pilot Operated Directional Valves

Pilot Operated Directional Valves ilot Operated Directional Valves Catalog DG3V-8; 7 l/min (185 USgpm) 35 bar (5 psi) DG5V-8; 7 l/min (185 USgpm) 35 bar (5 psi) NF D8, ISO-441-8, CEO 8 Introduction General Description he Size 8 Directiona

More information

Open center control block in mono block design MO-16, 22, 32

Open center control block in mono block design MO-16, 22, 32 Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:

More information

CX3 SOLENOID OPERATING PROPORTIONAL CONTROL BANKABLE VALVES FEATURES ORDERING CODE HYDRAULIC SYMBOLS

CX3 SOLENOID OPERATING PROPORTIONAL CONTROL BANKABLE VALVES FEATURES ORDERING CODE HYDRAULIC SYMBOLS CX3 SOLENOID OERING ROORIONL CONROL NKLE VLVES CX3 series valves are used for controlling fluid direction and flow rate as a function of the supply current to the proportional control solenoid. he individual

More information

4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections

4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections 4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500

More information

p max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60

p max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60 4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl

More information

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating

More information

BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511

BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511 ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar

More information

Directional Controls

Directional Controls Vickers Directional Controls ilot Operated Directional Valves DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000

More information

5.2 to 79 gpm 3000, 3600, 5000 psi

5.2 to 79 gpm 3000, 3600, 5000 psi Modular Valve Series Modular Valve Series. to 79 gpm 000, 600, 000 Overview he modular valve is designed and engineered to integrate multiple hydraulic valve operations into a single unit, which eliminates

More information

Solenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32

Solenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32 www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a

More information

IFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08

IFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08 IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through

More information

Directional control valves NG6...NG32 D03...D10 6

Directional control valves NG6...NG32 D03...D10 6 Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI

More information

Directional Control Valves. Features. Application. Operation

Directional Control Valves. Features. Application. Operation Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold

More information

Directional Controls

Directional Controls VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................

More information

ORV-M45. Contents. Additional Informations

ORV-M45. Contents. Additional Informations Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners

More information

SDS180 DLS180. Sectional directional control valve

SDS180 DLS180. Sectional directional control valve SDS8 DLS8 Sectional directional control valve SDS8/DLS8 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. Fitted with a main

More information

SECTION 1 Mobile Directional Control Valves

SECTION 1 Mobile Directional Control Valves SECION Mobile Directional Control Valves Make Model age Hydrocontrol Galtech ucher ucher Galtech Galtech Galtech Galtech Galtech Galtech ucher Cross Cross rince ucher ucher ucher ucher Hydrocontrol Hydrocontrol

More information

mechanical control valve

mechanical control valve DF Working conditions This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm /s -- 46 cst viscosity at 4 C temperature. DF5 DF DF DF5 N. of available ways --3--6

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves motion and progress 1/220 6 Monobloc directional control valves Contents 6.1 General specifications 66 6.2 Dimensional data 67 6.3 Performances curves

More information

NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES

NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES Valve Series Page...... A 2 WALVOIL FRONT-END LOADER VALVES...

More information

4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve

4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series

More information

Directional Control Valves Series D81V. General Description. Operation. Features. Specifications

Directional Control Valves Series D81V. General Description. Operation. Features. Specifications echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or

More information

Directional Control Valves. General Description. Operation. Features

Directional Control Valves. General Description. Operation. Features echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or

More information

LUDV control block of sandwich plate design

LUDV control block of sandwich plate design LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar

More information

RPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15.

RPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15. REK-03 Modular Valve ssembly REK-03/ /0 D n 03 p max 50 bar (366 SI) Q max 60 l/min (5.8 GM) Compact modular valve system assembly Easy to build complex circuits he possibility of subsequent rebuilding

More information

Auxiliary valves. Lever. Spool positioner Check valve Spool

Auxiliary valves. Lever. Spool positioner Check valve Spool Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet

More information

SECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES

SECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES SECION ILE HEC2003/2004 SERIES SERVO VLVE SYSEM he HEC2003/2004 Series Servo System features a high response servo valve, a manifold mounted filter, and three different mechanical mounting options. he

More information

D03, D05 & D08 SERIES

D03, D05 & D08 SERIES INDUSRIL FLUID OWER COMONENS ND SYSEMS D03, D05 & D08 SERIES D03-DC1-70 D05-SQ1--1K D08-R1--3K 31341 Friendship Drive, Magnolia, X 77355 el.: 281-259-7768 Fax: 281-259-7249 www.hyvair.com Features 1. Rugged

More information

ACCESSORIES CONTENTS. HYDRAULIC DISC BRAKE for MP, MR and MS type LB/

ACCESSORIES CONTENTS. HYDRAULIC DISC BRAKE for MP, MR and MS type LB/ ESSORIES ONTENTS age HYDRULI DIS RKE for M, MR and MS type L/288... 3 HYDRULI DIS RKE for MSS type LS/289(290) and MSV type LV/289(290)... 6 HYDRULI DIS RKE for MTS type LS/314(315) and MTV type LV/314(315)...

More information

Differential Lock Valve

Differential Lock Valve Differential Lock Valve Series M..DV (for 2 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion

More information

SDE030 SDE060. Directional control valves with direct acting solenoid

SDE030 SDE060. Directional control valves with direct acting solenoid SDE SDE6 Directional control valves with direct acting solenoid SDE-SDE6 Features Simle, comact and heavy duty designed sectional valve from to sections. Different tye of inlet covers. Different tyes of

More information

280 Series Stainless Steel Rotary Direction Control Valve For hydraulics in a harsh environment.

280 Series Stainless Steel Rotary Direction Control Valve For hydraulics in a harsh environment. 280 Series Stainless Steel Rotary Direction ontrol Valve For hydraulics in a harsh environment. he 280 Series is a high pressure, 316 stainless steel, hydraulic rotary direction control valve. It is the

More information

V050 SERIES DIRECTIONAL CONTROL VALVE

V050 SERIES DIRECTIONAL CONTROL VALVE V5 SERIES DIRECTIONAL CONTROL VALVE TAKE CONTROL Take control with Muncie Power Products V5 directional control valve. The V5 is constructed with high-grade iron castings and nickel-plated spools for use

More information

D07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:

D07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax: GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,

More information

Hyva Valves Introduction

Hyva Valves Introduction Introduction Hyva tipping valves Hyva offers a complete range of tipping valves to be used for different cylinder volumes. The T 0 & 00 valve can be used for flows up to 0 litre per minute. The pressure

More information

Directional Control Valve CV550

Directional Control Valve CV550 www.nimco-controls.com Directional Control Valve CV550 Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page

More information

IFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07

IFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07 ILO OERED DIRECIONL VLVE SIZE NG-1 / CEO-7 Certifiction CE Certified -119115 1 ISO 91: FEURES : Highest performnce in NG 1 Optimized spool design to reduce flow force roven qulity through 1 million endurnce

More information

Mobile control block, 6-way version sandwich plate design. Type SM12, series 1X RE /05.03

Mobile control block, 6-way version sandwich plate design. Type SM12, series 1X RE /05.03 RE 64 /05.03 Replaces : 0.0 obile control block, 6-way version sandwich plate design ype S, series X Nominal size aximum pressure, pump side 50 / 350* bar aximum pressure, actuator side 300 / 400* bar

More information

B8_58 (EDBZ-VEI) RE Edition: Replaces:

B8_58 (EDBZ-VEI) RE Edition: Replaces: 4/3 Directional valve elements 8_58 with or without EDZ-VEI) secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 8_58 EDZ-VEI) RE 183-54 Edition: 2.216 Replaces:

More information

MODEL RD5000 MONO-BLOCK. Model RD5100. Model RD5200. Model RD5300. Directional Control Valves 1, 2, 3 Spool VALVES CATV

MODEL RD5000 MONO-BLOCK. Model RD5100. Model RD5200. Model RD5300. Directional Control Valves 1, 2, 3 Spool VALVES CATV MOEL R5000 MONO-LOK irectional ontrol Valves 1, 2, 3 Spool Model R5100 VLVES Model R5200 Model R5300 TV 39-07-13-02 MOEL R5000 IMENSIONL T VLVES 7.25 5.25 OPTIONL, TOP OR OTTOM PORTING (OUTLET PORT) 5.00

More information

D3M Sectional valve technical catalogue 1st edition D3M.05

D3M Sectional valve technical catalogue 1st edition D3M.05 D3M Sectional valve ECHNICAL catalogue 1 st edition D3M.5 his catalogue shows the product in the most standard configurations. lease contact our Sales Dpt. for more detailed information or special requests.

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICIONS D08H Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol

More information

Filtration Contamination class 10, according to NAS 1638 can be realized with filter ß = 75

Filtration Contamination class 10, according to NAS 1638 can be realized with filter ß = 75 ccumulators 19 ccumulator ischarge Valve 3 Specifications Valve Function ccumulator ischarge Mounting Inline not restricted Fluid Mineral-oil or fluid HF / B / C / Viscosity 6... 25 SUS (1... 5 cst) Fluid-temperature

More information

V250 SERIES DIRECTIONAL CONTROL VALVES

V250 SERIES DIRECTIONAL CONTROL VALVES V SERIES DIRECTIONAL CONTROL VALVES TAKE CONTROL OF YOUR HYDRAULICS Take control with Muncie Power Products V directional control valve. The V is constructed with high-grade iron castings and nickel-plated

More information