SECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES
|
|
- Roderick Cooper
- 5 years ago
- Views:
Transcription
1 SECION ILE HEC2003/2004 SERIES SERVO VLVE SYSEM he HEC2003/2004 Series Servo System features a high response servo valve, a manifold mounted filter, and three different mechanical mounting options. he manifold can feature either SE or metric straight thread ports and an optional ball valve with a locking handle. he valve offers a spool position feedback signal that can be used for system diagnostics. he HEC2003/2004 Series Servo System is directly driven by Fife s family of electronic controllers, eliminating the need for a separate drive card. Fife offers a servo valve featuring a zero lap spool thereby eliminating dead band. he valve also has an Enable command that can place the valve in an all ports blocked position eliminating the need for a blocking valve in most applications. he HEC2003/2004 offers two different spool confi gurations enabling flows from 30 LM (8 GM) to 83 LM (22 GM). he HEC2003/2004 Series Servo System also has a pressure filter that comes with a dual mechanical/ electrical dirt indicator. CCESSORIES Interface: NF D05, CEO 5, NG 10 Flow Rating at 35 bar (500 SI) per metering edge: 83 LM (22 GM) - HEC2004 models 30 LM (8 GM) - HEC2003 models Frequency Response: > 45 Hz (-3 d at 5% signal) Step Response: < 25 ms at 100% signal ower Consumption: 60 V Max Maximum Operating ressure: ort,, 207 ar (3000 psi) ort 35 ar (500 psi) Minimum ank Line ressure: 1.4 ar (20 psi) ypical Spool Overlap: Zero Overlap Internal Leakage:.5 cu in/min per land at 1000 psi Hysteresis: < 0.5% Repeatability: < 0.5% Viscosity Range: 17 to 65 cst (75 to 300 SSU) Fluids: Mineral ase Hydraulic Fluid Operating emp. Range (mbient): 0 to 60 C (32 to 140 F) Fluid Cleanliness Level: ISO Class 15/12/10 (for longer life) ISO Class 16/14/11 (for normal operation) Voltage Supply: 24 VDC (21 VDC Min., 30 VDC Max.) eak Current 4 amps Command Signals: ± 10 VDC at 100 K Ohm Input Impedance ± 20 m at 499 Ohm Input Impedance rotection Class: I65, NEM 4 (Factory Sealed) Filter: H ype: ypassing filter Element: 10 micron, 207 bar (3000 psid) collapse rating Filter Dirt Indicator type of contact electrical rating connector: Electrical/Visual 240 VC, 28 VDC KEY FEURES High response servo valve with spool position feedback signal ll components are mounted over the drip pan Servo Valve operates on 24V DC Manifold mounted pressure fi lter with dual indicator Option for a prewired junction box SE or Metric female ports counterbalance valve to lock cylinder in place Integrated check valve on return line
2 EDESL VLVE SND SSEMLY ( SERIES) all Valve on (21.04) Counterbalance Valve on Directional Valve code on G Needle Valve Used for manual flow control on valve stand with directional valve (1.00) Lifting Hole 864 (34.01) 1.4 (21.32) (22.47) 90.9 (3.58) 4.3 (.17) olt Grip (16.50) (.75) (11.50) (14.50) Ø (.38) (16.00) (4 laces) * Maximum weight for Series valve stands is.5 kg (122 lbs). Low profile Low floor pro mount le oor design mount design Compact Compact ll components over drip pan ll componets over drip pan ort Descriptions,,, Size SE SE-12 Metric ISO 6149 #M
3 DRI N RCKE VLVE SND SSEMLY (D SERIES) Counterbalance Valve code (9.65) 84.6 (3.33) (19.) code Junction ox code all Valve G Needle Valve used for manual flow control on valve stand with directional valve (1.00) Lifting Hole (4.00) See Note (35.52) (12.25) (4.34) (7.00) See Note (22.82) (20.82) 11.1 (.44) olt Grip (16.10) (16.50) (20.48) Ø 9.7 (.38) (2 laces) (6.00) (13.11) (6.25) Note: 4 x Ø 11.1 (0.44) thru holes available for wall mtg. on (4) x (4) square pattern Figure 2 * Maximum weight for D Series valve stands is kg (144 lbs). Floor or beam mounting capabilities Compact design Junction box available either with or without 24 volt supply. on. ll components over drip pan ort Descriptions,,, Size SE SE-12 Metric ISO 6149 #M
4 EXENDED VLVE SND SSEMLY (E SERIES) Counterbalance Valve on (7.65) 84.6 (3.33) (21.98) on Junction box code on all Valve on G Needle Valve used for manual flow control on valve stand with directional valve (1.00) Lifting Eye (10.25) 14.2 (50.17) ] (38.63) (4.34) (37.47) Ø 14.3 (.56) (4 laces) 12.7 (.50) olt Grip (16.48) (12.00) (14.00) Figure (16.00) * Maximum weight for E Series valve stands is 95 kg (209 lbs). ll components over drip pan Junction box available either with or without 24 volt supply. on. ort Descriptions,,, Size SE SE-12 Metric ISO 6149 #M
5 HEC2003/2004 SERIES SERVO VLVE SYSEM R ORDERING INFORMION art Number Description H Cable assembly with connector for H0930/ /4 servo valve, 4.5 meters (15ft) long H Counterbalance valve (comes as a standard on certain v alve stand configurations, see model code on previous page) H ressure filter with mechanical and electrical indicator H 2028 Element for H pressure filter H ressure gauge R ORDERING INFORMION H E C X - X X - X X X /X GM Rating LM (22 GM) * preferred option Should be suitable for most guiding applications LM (8 GM) 1 - with directional valve 0 - no directional valve Counterbalance Valve N - H Servo Valve with no counterbalance valve C - H Servo Valve with H counterbalance valve O - H Servo Valve with no counterbalance valve ort ype S - SE M - Metric Coil Voltage 0 - no directional valve 1-24V 2-120V 3-240V Valve Command Signal lank - ± 10 V signal /C - ± 20 m signal / - Includes ball valve on supply line ssembly ype E - Extended assembly, does not include junction box E1- Extended assembly with prewired junction box including 24 volt power supply E2- Extended assembly with prewired junction box excluding 24 volt power supply D - Drip pan bracket assembly, does not include junction box D1- Drip pan bracket assembly with prewired junction box including 24 volt power supply D2 - Drip pan bracket assembly with prewired junction box excluding 24 volt power supply - edestal assembly, does not include junction box NORH, CENRL ND SOUH MERIC el Fax sales@maxcessintl.com INDI el Fax india@maxcessintl.com EUROE, MIDDLE ES ND FRIC el Fax sales@maxcess.eu JN el Fax japan@maxcessintl.com CHIN el Fax info@maxcessintl.com.cn KORE, IWN ND SE SI asia@maxcessintl.com Maxcess Revise 2/11/16
HEC2003/2004 Series Servo Valve System
BULLETIN 10006 Bul. 5.00 GUIDING SYSTEMS October 2011 HEC2003/2004 Series Servo Valve System High response servo valve with spool position feedback signal All components are mounted over the drip pan Servo
More informationDirect Operated Proportional DC Valves
echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable
More informationD07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
More informationDirectional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
More informationProportional pressure reducing valve of 3-way design
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com Electric Drives and Controls Hydraulics Linear Motion and ssembly echnologies neumatics
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
More information2/2- or 3/2-way- Rocker Solenoid Valve
2/2- or /2-way- Rocker Solenoid Valve Direct acting Hermetic isolation of fluid 0 145 SI 1) DN 2 mm Type 6128 can be combined with... Sub-base, threaded port 22mm width per station Type 2507 Cable lug
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information Series D101VW General Series D101VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are
More informationHydraulics 1. Directional Control Valves Series D1M. Features. Application. Operation. D1MW Solenoid Operated Free Lead Wire
ulletin 2544-1/US Introduction pplication arker D1M Series hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3 position styles. hey are
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information Series D61VW General Series D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are
More informationDirectional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-2500/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3-position. hey are manifold mounted which
More informationNG6. Proportional adjustment. Manifold mounting acc. to ISO External drain. Main stage spool type valve. Pilot stage seated type valve.
Catalog HY14-255/US Technical Information Series VY*K General Description Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application
More informationMAGPOWR TENSION CONTROL SOLUTIONS MAGPOWR TENSION CONTROL SOLUTIONS. Advanced Web Tension and Torque Control Technologies
MAGPOWR TENSION CONTROL SOLUTIONS MAGPOWR TENSION CONTROL SOLUTIONS Advanced Web Tension and Control Technologies INTRODUCTION 1 High quality and efficiency are the goals of every web production line,
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
More information4/2- and 4/3-Way Proportional Directional Control Valve Direct Operated, Model 4 WRA (Series 1X) PSI (315 bar) H/A 1768
/- and /-Way roptional Directional Control Valve Direct Operated, Model WR (Series X) Size 6 and... 6 SI ( bar).... GM (9 L/min) R 9 /6.98 R 9 /6.98 Replaces:.9 Characteristics: F the open loop control
More informationDirectional Control Valves. Application. Features. Operation
Catalog HY14-2502/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationTidland Digital Measurement System
TIDLAND SLITTING SOLUTIONS Tidland Digital Measurement System Installation, Operation and Maintenance EN For use with SIKO MA503 display MI 659995 1 H CONTENTS WIRING DIAGRAM 1-1 INSTALLATION 2-1 OPERATION
More informationTidland Raptor Series Torque Chuck
TIDLAND WINDING SOLUTIONS Tidland Raptor Series Torque Chuck User Manual EN MI 660289 1 H Includes 3", 4" 6" chucks and adapters TABLE OF CONTENTS Caution... 3 Tidland Customer Service... 3 Recommended
More informationDirectional Controls
VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................
More informationTIDLAND WINDING SOLUTIONS. Tidland Force5 Chuck. Installation, Operation and Maintenance MI J
TIDLAND WINDING SOLUTIONS Tidland Force5 Chuck Installation, Operation and Maintenance EN MI 517787 1 J TABLE OF CONTENTS Table of Contents... 2 Caution... 2 Tidland Customer Service... 2 Recommended Tools...
More informationDirectional Control Valves. Application. Features. Operation.
Catalog HY14-2500/US Introduction pplication Series D101 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Catalog HY14-2500/US Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted
More informationDirectional Control Valves
echnical Information General Description he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
More informationNG06. General Size NG6 NG10 Design
Catalog HY14-255/US Series VY*K General Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application as both a sequence valve
More informationSTAR. series. 2-Stage Servovalve Rated flows up to 120 l/m. Features
STR series 11 2-Stage Servovalve Rated flows up to 12 l/m Features Maximum operating pressure 5 bar Electric feedback at main stage spool ISO 441-5-5-4 mounting pattern (NG1) Internal or pilot supply &
More informationDirectional Control Valves
Frequently sked Questions Frequently sked Questions What is the function of a directional control valve? directional control valve is the extend and retract control for your hydraulic cylinders. It provides
More informationDirectional Control Valves. Application. Features. Operation
Catalog HY14-2500/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationRexroth Hydraulics. Servo directional valve of 4-way design Type 4WS.2EM RE /03.99
RE 29 564/03.99 Replaces: 29 563 Servo directional valve of 4-way design ype 4WS.2EM Nominal size 6 Series 2X Maximum operating pressures 210 / 315 bar Maximum flow 40 L/min H//D 5994/98 ype 4WS2EM 6-2X/.E...K17EV
More information10005 Bul BULLETIN. December GUIDING SYSTEMS HEC39 Hydraulic Power Unit with Integrated Proportional Valve
GUIDING SYSTEMS HEC39 Hydraulic Power Unit with Integrated Proportional Valve BULLETIN 05 Bul. 5.00 December 2013 STANDARD DESIGN FEATURES H09 series high performance proportional valve is integrated onto
More informationDFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
More informationHigh Response Type Proportional Electro-Hydraulic Directional and Flow Control Valves
igh Response ype roportional Electro-ydraulic s igh response, high precision and high reliability are achieved by a combination of compact and powerful solenoid and spool-position-detection LVD. Direct
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH SECION Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories echnical Information General Description Series D61VW directional control valves
More informationDirectional control valves NG6...NG32 D03...D10 6
Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI
More informationProportional pressure reducing valve, in 3-way version
roportional pressure reducing valve, in 3-way version RE 29184/06.11 Replaces: 12.02 1/12 ype 3DRE and 3DREE Size 6 Component series 2X Maximum operating pressure Maximum flow 100 bar 15 l/min able of
More informationProportional pressure reducing valve of 3-way design Types 3DREP and 3DREPE
RE 29 184/12.02 Replaces: 12.98 roportional pressure reducing valve of 3-way design ypes 3DRE and 3DREE Nominal size 6 Series 2X Maximum operating pressure 100 bar Maximum flow 15 L/min H//D 5735/97 ype
More informationDirectional Control Valves. Features. Application. Operation
Catalog HY14-2502/US Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage 4-way valves. hey are available in 2 or 3-
More informationProportional pressure reducing valve, 3-way variant, pilot operated
roportional pressure reducing valve, 3-way variant, pilot operated RE 29286/1.1 Replaces: 2.8 1/14 ypes 3DRE(M) and 3DRE(M)E Sizes 1 and 16 Component series 7X Maximum pressure setting 315 bar (size 1)
More informationDirectional control valves, pilot-operated, with electrical position feedback and integrated electronics (OBE) Type 4WRDE. Contents.
Directional control valves, pilot-operated, with electrical position feedback and integrated electronics (OE) ype 4WRDE RE 997 Edition: 6-5 Replaces: 99 (NG and NG6) Sizes and 6 Component series 6X Maximum
More informationProportional Valves. Proportional Two-Stage Directional Valves
VICKERS roportional Valves roportional Two-Stage Directional Valves KHDG5V-5/7, 1 Series ressures to 3 bar ( psi) This product has been designed and tested to meet specific standards outlined in the European
More informationBar 35 PSI 500. Pressure Drop L/M GPM. Flow
NF D3 O E R I N G N D E C H N I C L D RINGS Maximum Flow... See Chart Maximum Operating ressure (, and orts)... 3 ar ( SI) Maximum ank Line ressure... 13 ar (1 SI) Mounting attern... ISO 441--3-4-, NF-D3
More information油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189
ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
DIRECIONL VLVE OERION Directional Valve Features, Selection and Operating Recommendations CONC INFORMION US Headquarters Dynex/Rivett Inc. 770 Capitol Drive ewaukee, WI 3072 U.S.. el: 262-69-2222 FX: 262-69-032
More informationBankable Control Valves
Hydraulics ankable Control Valves Catalog 3123/US Catalog 3123/US Contents ankable Control Valves WRNING FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS ND/OR SYSEMS DESCRIED HEREIN OR RELED IEMS
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationDirectional Control Valves
Frequently sked Questions N-1 Frequently sked Questions What is the function of a directional control valve? directional control valve is the extend and retract control for your hydraulic cylinders. It
More informationTESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement
More informationProportional Valves. Proportional Directional and Throttle Valves Solenoid Operated
Vickers roportional Valves roportional Directional and hrottle Valves Solenoid Operated KDG4V-3S and KG4V-3S standard performance series K()DG4V-3 and K()G4V-3 high performance series ISO 4401-03 (NF D03)
More informationProportional Valves. Proportional solenoid valves for pressure and flow control
Proportional Valves Proportional solenoid valves for pressure and flow control EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E4 September, 7 - Electro- Proportional Valves Section Contents Typical
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data
More informationProportional Directional Control Valves Series D*1FE. General Description. Features. D41FE Standard
Technical Information General Description pilot operated proportional valves are designed for high precision applications that require a safe middle position of the main spool at power down. The pilot
More informationPRESSURE SWITCH 1PS / 1PF / 1PT
RESSURE SWICH 1S / 1F / 1 Ref. No. 98 Release 7/2 1 Non adjustable differential type. Spring loaded sealed piston construction. Encapsulated design for protection against dust. Six pressure ranges available,
More informationHydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY28-2661-CD/US
More informationseries 2-Stage Servovalve Rated flows up to 20 l/m Features
series 46 2-Stage Servovalve Rated flows up to 2 l/m Features Standard & high response versions Maximum operating pressure 15 bar ISO 441---4 mounting pattern Internal pilot supply (4 port) Suitable for
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple
More informationStandard Aluminum Dead Shaft Idler Rolls
A Standard Aluminum Dead Shaft Idler Rolls Lower inertia when compared to a steel idler Ideal for lower web tensions More corrosion resistant than steel Dynamically balanced for high speed operation Readily
More informationSingle-circuit power brake valve LT 05
Single-circuit power brake valve L 05 RE 66 Edition: 09.0 Replaces: 08.00 Series X Service brake pressure 0, 60, 80, 00 and 5 bar HD 679 Features Small installation dimensions Integrated maximum pressure
More informationTidland Great Expansion Leaf Shaft
TIDLAND WINDING SOLUTIONS Tidland Great Expansion Leaf Shaft Installation, Operation and Maintenance EN MI 27L536158 1 L 6" and 12" Shaft Diameter with instructions for Add-on Leaf Assemblies IMPORTANT
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationSeries Shockless Type Solenoid Controlled Pilot Operated Directional Valves
Solenoid Controlled ilot Operated Directional Valves Electronic Circuit X Specifications Descriptions G-DSHG-4-3C - - - -/9 G-DSHG-6-3C - - - -/9 Max. Flow /min (U.S.GM) 16 (4.3) (66.1) 1 1 Max. Operating
More informationRA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.
R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to
More informationVALVES INTRODUCTION. DIRECTIONAL CONTROL VALVES SELECTION GUIDE 2 or 3 way for single-acting cylinders or tools. FULL SYSTEM CONTROL
INRODUCION VLVES FULL SYSEM CONROL Hydraulic valves are devices that control different aspects of your hydraulic system's operation. he most common types of valves are directional control valves, flow
More informationCyclone High Speed Centering Shaft
TIDLAND WINDING SOLUTIONS Cyclone High Speed Centering Shaft User Manual EN MI 270013883 1 CONTENTS INTRODUCTION 1-1 About these operating instructions... 1-1 SAFETY INFORMATION 2-1 Proper use... 2-2
More information280 Series Stainless Steel Rotary Direction Control Valve For hydraulics in a harsh environment.
280 Series Stainless Steel Rotary Direction ontrol Valve For hydraulics in a harsh environment. he 280 Series is a high pressure, 316 stainless steel, hydraulic rotary direction control valve. It is the
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional
More informationCX3 SOLENOID OPERATING PROPORTIONAL CONTROL BANKABLE VALVES FEATURES ORDERING CODE HYDRAULIC SYMBOLS
CX3 SOLENOID OERING ROORIONL CONROL NKLE VLVES CX3 series valves are used for controlling fluid direction and flow rate as a function of the supply current to the proportional control solenoid. he individual
More information45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and
More informationCMF2 Series Applicable cylinder bore size: Max. ø160
4G/ M4G/ Individual wiring manifold ISO size 2 DIN terminal ox type 5 port pilot operated valve ISO conformed valve 2 Series pplicale cylinder ore size: Max. ø160 MN4G/ Common specifications 4G/ W4G/2
More informationDirect Operated Type Solenoid Operated Proportional Throttle Valve
Direct Operated ype Solenoid Operated roportional hrottle Valve EM-G EM-G3 EM-G3-X EMS-2 EMS-2 EM-G4 b X EMS-3 Features hese proportional throttle directional control valves perform spool position feedback
More informationCONTROL VALVES
- 1 CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US echnical Information General Description Series D1VW directional control
More informationZE3 & ZE4 Electric 1 & 1 1/2 HP Pump Series
ZE3 & ZE4 Electric 1 & 1 1/2 H ump Hydraulic echnology Worldwide Shown from left to right: ZE334M-K, ZE411D-FHR he New Standard for Industrial pplications, Z-Class ll models in the chart below are the
More informationD03, D05 & D08 SERIES
INDUSRIL FLUID OWER COMONENS ND SYSEMS D03, D05 & D08 SERIES D03-DC1-70 D05-SQ1--1K D08-R1--3K 31341 Friendship Drive, Magnolia, X 77355 el.: 281-259-7768 Fax: 281-259-7249 www.hyvair.com Features 1. Rugged
More informationseries 2-Stage Servovalve Rated flows up to 55 l/m Features
series 456 2-Stage Servovalve Rated flows up to 55 l/m Features Standard & high response versions Maximum operating pressure 15 bar Special mounting pattern Internal pilot supply (4 port) Suitable for
More informationseries 2-Stage Servovalve Rated flows up to 80 l/m Features
series 65 2-Stage Servovalve Rated flows up to 8 l/m Features Maximum operating pressure 15 bar ISO 172-4-4--92 mounting pattern Internal pilot supply (4 port) Suitable for -way or 4-way applications High
More informationHigh Pressure, High Flow Rate Modular Valves
eatures Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly and easily. roblems such
More information4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE)
4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OE) ype 4WRDE Nominal size to 35 Component series 5X Maximum operating pressure 3 bar
More informationTIDLAND WINDING SOLUTIONS. Tidland Leaf Shaft. User Manual. Series 650/650HD/750 MI 27L L
TIDLAND WINDING SOLUTIONS Tidland Leaf Shaft User Manual EN Series 650/650HD/750 MI 27L691995 1 L IMPORTANT SAFETY INSTRUCTIONS When using this Tidland product, basic safety precautions should always be
More informationDirect Operated Type Solenoid Operated Proportional Throttle Valve
efore using the product, please check the For latest information, DF catalogs and operation manuals Direct Operated ype Solenoid Operated roportional hrottle Valve EM-G EM-G3 EM-G3-X EMS-2 EMS-2 EM-G4
More informationOpen center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
More informationSTAR. series. 2-Stage Servovalve Rated flows up to 230 l/m. Features
STAR series 89 2-Stage Servovalve Rated flows up to 2 l/m Features Maximum operating pressure 15 bar ISO 172-5-2 mounting pattern Internal pilot supply (4 port) Suitable for -way or 4-way applications
More informationSTAR. series. 2-Stage Servovalve Rated flows up to 75 l/m. Features
STAR series 55 2-Stage Servovalve Rated flows up to 75 l/m Features Standard & high response versions Maximum operating pressure 15 bar ISO 172-4-4-2 mounting pattern Internal pilot supply (4 port) Suitable
More informationDXPE*J /117 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 31
85 320/117 ED DXPE*J DIRECtIONL CONtROL VLVE PILOt OPERtED, WItH OE ND FEEDCK SUPLtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 DXPE7J ISO 4401-07 DXPE8J ISO 4401-08 p max (see performance table) Q
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH, IHUNG HSIEN, IWN 41468, RO. EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/
More informationSTAR. series. 2-Stage Servovalve Rated flows up to 7 l/m. Features
STAR series 2 2-Stage Servovalve Rated flows up to 7 l/m Features Miniature design Maximum operating pressure 315 bar ISO 1372-1-1--92 mounting pattern Internal pilot supply (4 port) Suitable for 3-way
More information3-way Proportional pressure reducing valve, pilot operated
01/12 3-way roportional pressure reducing valve, pilot operated 6.6 ype 3DRE(M) and 3DRE(M)E Component series L6X NG 10 and 16 Max pressure 315 bar Max flow: 125L/min(size 10) 300L/min(size 16) Contents
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................
More informationSTAR. series. 2-Stage Servovalve Rated flows up to 20 l/m. Features
STAR series 454 2-Stage Servovalve Rated flows up to 2 l/m Features Standard & high response versions Maximum operating pressure 15 bar ISO 172-2-2-2 mounting pattern Internal pilot supply (4 port) Suitable
More informationControl Reliable Double Valves with Total Dynamic Monitoring & Complete Memory
Control Reliable Double Valves Safety Exhaust (Dump) DM Series D Self Monitored - Clutch/rake Control asic Size,,, and 0 Dynamic Monitoring With Complete Memory: Memory, monitoring, and air flow control
More informationSTAR. series. Servo proportional valve Rated flows up to 80 l/m. Features
STAR series 65 Servo proportional valve Rated flows up to 8 l/m Features Maximum operating pressure 15 bar ISO 172-4-4--92 mounting pattern Internal pilot supply (4 port) Suitable for -way or 4-way applications
More informationAccessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description.
Vickers ccessories Subplates and Connection lates for Four-ort Directional Valves ISO 4401, 02/03/05/07/08 General Description his range of subplates and auxiliary connection plates offers an economical
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US Industrial Hydraulic Valves WRNING USER RESONSIILIY FILURE OR IMROER SELECION
More informationSc h rader Bellows. CS Series Air Control Valves. 2 & 3-Way, Inline, Manifold & Stacking Direct Acting Solenoid Valves
Sc h rader Bellows 2 & 3-Way, Inline, Manifold & Stacking Direct cting Solenoid Valves INDEX PGE Features Inline Valves... 3 Stacking Valves... 4 Manifold Valves... 5 Valve Model Number System... 6 Solenoid
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US Industrial Hydraulic Valves LH WRNING USER RESONSIILIY FILURE OR IMROER
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More information4-way directional servo-valve
4-way directional servo-valve RE 29564/09.10 Replaces: 01.07 1/12 Type 4WS.2E Size 6 Component series 2X Maximum operating pressure 315 bar Maximum flow 48 l/min HD5994 Table of contents Contents age Features
More informationProportional Pressure Reducing Valve Series D1FV
Characteristics roportional ressure Reducing Valve Series D1FV he proportional pressure reducing valves series D1FV are available with and without onboard electronics (OE). D1FV OE he digital onboard electronics
More informationCONTROL VALVES
- 1 CONROL VALVES resentación de la compañía HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
More information