CTSN-4 Content Sectional Directional Control Valves
|
|
- Christina Nicholson
- 5 years ago
- Views:
Transcription
1
2 SN-4 ontent Specifications.5 Ordering code.7 Dimensions.12 erformance data.13 Inlet relief options.14 Spool options.15 side options.20 side spool positioners.23 ort relief.29 Outlet options.30 1
3 For Mobile nd Industrial Hydraulic pplications M-2 VILLE SEIONS Nominal flow rate Operating pressure (maximum) 45 l/min 12 US gpm 250 bar 3600 psi ack pressure (maximum) on outlet port 25 bar 360 psi M-3 VILLE SEIONS FROM 1 O 6 Nominal flow rate 45 l/min 12 US gpm Operating pressure parallel or tandem circuit 315 bar 4600 psi (maximum) series circuit 210 bar 3050 psi ack pressure (maximum) on outlet port 25 bar 360 psi M-4 VILLE SEIONS FROM 1 O 6 Nominal flow rate 60 l/min 16 US gpm Operating pressure parallel or tandem circuit 315 bar 4600 psi (maximum) series circuit 210 bar 3050 psi ack pressure (maximum) on outlet port 25 bar 360 psi M-5 VILLE SEIONS FROM 1 O 6 Nominal flow rate 80 l/min 21 US gpm Operating pressure parallel or tandem circuit 315 bar 4600 psi (maximum) series circuit 250 bar 3600 psi ack pressure (maximum) on outlet port 25 bar 360 psi 2
4 MONOLOK DIREIONL ONROL VLVES M-2 / M-3 / M-4 / M-5 / MS-5 SEIONL DIREIONL ONROL VLVES SN-3 / SN-4 / SN-6 MS-5 VILLE SEIONS FROM 1 O 6 With Independent load check valve in each section, and optional port relief. Nominal flow rate 80 l/min 21 US gpm Operating pressure parallel or tandem circuit 315 bar 4600 psi (maximum) series circuit 250 bar 3600 psi ack pressure (maximum) on outlet port 25 bar 360 psi SN-3 VILLE SEIONS FROM 1 O 12 Nominal flow rate 50 l/min 13 US gpm Operating pressure parallel or tandem circuit 315 bar 4600 psi (maximum) series circuit 210 bar 3050 psi ack pressure (maximum) on outlet port 25 bar 360 psi SN-4 VILLE SEIONS FROM 1 O 12 Nominal flow rate 80 l/min 21 US gpm Operating pressure parallel or tandem circuit 315 bar 4600 psi (maximum) series circuit 210 bar 3050 psi ack pressure (maximum) on outlet port 25 bar 360 psi SN-6 VILLE SEIONS FROM 1 O 12 Nominal flow rate 140 l/min 37 US gpm Operating pressure parallel or tandem circuit 315 bar 4600 psi (maximum) series circuit 210 bar 3050 psi ack pressure (maximum) on outlet port 25 bar 360 psi 3
5 Innovative Designs rofessional Quality ustomer Satisfaction! VILLE SEIONS FROM 1 O 12 SN-4 4
6 SN Nominal flow rate SN-4 Specifications 80 l/min 21 US gpm Operating pressure (maximum) parallel or tandem circuit series circuit 315 bar 210 bar 4600 psi 3050 psi ack pressure (maximum) on outlet port 25 bar 360 psi Fluid temperature range with NR(UN-N) seals with FM(VION) seal from - 20 to 80 from - 20 to 100 from - 4 to 176 F from - 4 to 212 F 2 operating range from 15 to 75 mm /s from 15 to 75 cst 2 Viscosity min 12 mm /s 12 cst 2 max. 400 mm /s 400 cst mbient temperature range from - 40 to 60 from - 40 to 140 F 5
7 SN-4 omplete HOW O ORDER FOR OMLEE SSEMLED VLVE SN-4 / 2S - 3 / 18L / 28L / G-4-6 / M3 2S No. of working section 3 Inlet cover with a main pressure relief valve 18L 28L G-4-6 M3 1st section (complete working section) Following section (complete working section) S ports Outlet cover 6
8 SN-4 Inlet Section FSN-4 / SG-3 / G4 Inlet relief (optional) Inlet Relief (optional) YE ODE DESRIION GE SG-2 YLSN43002 Range 80 to 160 bar / 1150 to 2300 psi, standard setting 125 bar / 1800 psi. 14 SG-3 YLSN43003 Range 125 to 250 bar / 1800 to 3600 psi, standard setting 175 bar / 2500 psi. 14 SG-4 YLSN43004 Range 200 to 315bar / 2900 to 4600 psi, standard setting 220 bar / 3200 psi. 14 Standard setting is referred to 10 l/min US gpm flow.. 14 SV YLSN44000 Relief valve blanking plug. 14 XSG YLX21000 ilot operated pressure relief valve Range 25 to 315 bar/ 360 to 4600 psi, standard setting 125 bar/ 1800 psi. 14 7
9 SN-4 Outlet Section FSN-4 / G-6 / M3 8
10 SN-4 Working Section EWSN-4 / 1S / 1 8 L / 1(G3-100) / G Spool symbol "" side Spool positioners "" side (optional) ort relief (optional) 1: Spool Symbol YE 1 ODE YLWSN42001 DESRIION Double acting,3 positions,with and closed in neutral position 1S YLWSN42010 Double acting,3 positions,with and closed in neutral position, for series circuit YLWSN42002 YLWSN42003 YLWSN42004 Double acting,3 positions,with and open to tank in neutral position Single acting on closed in neutral position, 3 positions, plugged Single acting on closed in neutral position, 3 positions, plugged 5 YLWSN42005 Double acting, 3 positions, with open to ank in neutral position YLWSN42006 Double acting, 3 positions, with open to ank in neutral position. 17 5Y YLWSN43051 Double acting, 4 positions, floating circuit in 4th position with, open to ank by pushing the lever. 19 GE
11 SN-4 Working Section EWSN-4 / 1S / 1 8 L / 1(G3-100) / G Spool symbol "" side Spool positioners "" side (optional) ort relief (optional) 2: Side Spool ositioners YE ODE YLWSN43061 YLWSN43062 YLWSN43063 DESRIION Detent in pos , without spring centered 2 positions, detent in pos. 0-2, without spring centered 2 positions, detent in pos. 1-0, without spring centered 8D2 YLWSN43082 With spring return to neutral position and pin with M8 male thread for dual control YLWSN43080 ON/OFF neumatic actuator 8E3 YLWSN44300 ON/OFF Electro-neumatic actuator. 24 8MG1 (NO) 8MG2 (NO) 8MG3 (NO) MG (NO) 8MG1 (N) 8MG2 (N) 8MG3 (N) MG (N) YLWSN43801 YLWSN43802 YLWSN43803 YLWSN43804 YLWSN YLWSN YLWSN YLWSN YLWSN43008 YLWSN44081 YLWSN44082 YLWSN43091 YLWSN43092 YLWSN43093 Microswitch kit operated in pos. 1 (Normally Open) Microswitch kit operated in pos. 2 (Normally Open) Microswitch kit operated in pos. 1&2 (Normally Open) Microswitch with NO terminal Microswitch kit operated in pos. 1 (Normally losed) Microswitch kit operated in pos. 2 (Normally losed) Microswitch kit operated in pos. 1&2 (Normally losed) Microswitch with N terminal With spring return to neutral position 2 positions, with spring centered from pos. 1 2 positions, with spring centered from pos. 2 Detent in pos. 1, 2 with spring centered Detent in pos. 2 with spring centered Detent in pos. 1 with spring centered GE
12 2: Side Spool ositioners YE ODE DESRIION GE 8ED3+RV-KE1R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE2R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE3R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE4R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE5R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE6R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE7R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE8R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE9R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE10R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE11R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ED3+RV-KE12R3 YLWSN S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 25 8ER3+RV-KE1S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE2S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE3S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE4S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE5S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE6S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE7S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE8S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE9S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE10S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE11S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+RV-KE12S0 YLWSN S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 3: Side (Optional) YE ODE DESRIION L YLWSN44000 Standard lever. 20 SL L YLWSN44001 YLWSN44002 Without lever, with dust proof plate Joystick lever for 2 section operation Q YLWSN44003 Flexible cable connection. 22 GE : ort Relief (Optional) YE ODE DESRIION GE (G2-63) YLWSN45002 nti-shock valve, range 63 to 125 bar / from 900 to 1800 psi standard setting 63 bar / 900 psi. 29 (G3-100) YLWSN45003 nti-shock valve, range 100 to 250 bar / from 1450 to 3600 psi standard setting 100bar / 1450 psi. 29 (G4-200) YLWSN45004 nti-shock valve, range 200 to 315 bar / from 2900 to 4600 psi standard setting 200 bar / 2900 psi. 29 M (G2-63) YLWSN45005 nti-shock valve, range 63 to 125 bar / from 900 to 1800 psi standard setting 63 bar / 900 psi, for low setting. 29 U (G2-63) YLWSN45012 nti-shock valve and nti-cavitation valve, range 63 to 125 bar / from 900 to 1800 psi standard setting 63 bar / 900 psi. 29 U (G3-100) YLWSN45013 nti-shock valve and nti-cavitation valve, range 100 to 250 bar / from 1450 to 3600 psi standard setting 100 bar / 1450 psi. 29 U (G4-200) YLWSN45014 nti-shock valve and nti-cavitation valve, range 200 to 315 bar / from 2900 to 4600 psi standard setting 200 bar / 2900 psi. 29 YLWSN45100 nti-cavitation
13 SN-4 Dimensions X 6.54 Y xM Standard threads orts Inlet and and Outlet ilot ports Hydraulic neumatic carry-over S G1/2 G1/2 G3/4 S G1/4 NF 1/8-27 UN-UNF 7/8-14 UNF-2 3/4-16 UNF-2 7/8-14 UNF-2 (SE 10) (SE 8) (SE 10) UN-UNF 9/16-18 UNF-2 (SE 6) NF 1/8-27 MERI M22x1.5 M22x1.5 M22x1.5 MERI G1/4 NF 1/8-27 Standard dimensions YE X Y mm in mm in YE X Y mm in mm in SN4 /1S SN4 /2S SN4 /3S SN4 /4S SN4 /5S SN4 /6S SN4 /7S SN4 /8S SN4 /9S SN4 /10S SN4 /11S SN4 /12S
14 SN-4 erformance urve hart ressure drop ressure drop ressure drop 20 (bar) (bar) (bar) to 12 sections 8 sections 4 sections 1 sections to () (US gpm) 270 (psi) Flow (l/min) (US gpm) 270 (psi) 12(12) 180 1(1) Flow (l/min) () to (US gpm) 270 (psi) 1(1) (12) Flow (l/min) 13
15 SN-4 Inlet Relief (Optional) ype SG Direct pressure relief valve: ø ype XSG ilot operated pressure relief valve: ø Max ype SV Relief valve blanking plug: ø
16 15 SN-4 Spool Options YE 1 closed & & & closed open closed YE 2 closed & closed open closed
17 SN-4 Spool Options YE 3 closed "" port plugged & closed open "" port plugged closed open "" port plugged YE 4 closed open "" port plugged & closed open "" port plugged closed "" port plugged 16
18 17 SN-4 Spool Options YE 5 closed & closed open closed YE 6 closed & closed open closed
19 SN-4 Spool Options YE 1S closed "" port plugged & & & closed open "" port plugged closed "" port plugged 18
20 SN-4 Spool Options YE 5Y NOE : WIH SEIL ODY ND SEIL OSIIONER. & closed 3 open 3 closed & & & closed 3 open 3 closed 19
21 SN-4 Side ype L ype L: SNDRD LEVER KI ype SL ype SL: WIH DUS-ROOF LE 20
22 SN-4 Side L: Joystick control ype L L1 L ype L L L
23 SN-4 Side Note : ONNEION KI DOES NO INLUDE LE able Q Kits ype Q M6 M16 Q Kit:
24 SN-4 Side ype Kit: DEEN IN OS , WIHOU SRING ENERED Kit: 2 OSIIONS, DEEN IN OS. 0-2, WIHOU SRING ENERED Kit: 2 OSIIONS, DEEN IN OS. 1-0, WIHOU SRING ENERED ype 8D M D2 Kit: WIH SRING REURN O NEURL OSIION ND IN WIH M8 MLE HRED FOR DUL ONROL 23
25 ype 8 V1 & V2 : N 1/ V1 V V1 V ilot pressure : V1 V ø V1 V Solenoid operating features : 24
26 ype 8ED VR Hy rau c c rcu t VRE VR valve operating features : V L Operating features : ILO RESSURE: Solenoid operating features : 25
27 SN-4 Side ype 8ER V L V L Operating features : ILO RESSURE: Solenoid operating features : NOMINL VOLGE: 12VD / 24 VD OWER RING: 21 W DUY YLE: 100 % 26
28 SN-4 Side ype 8MG 8MG1 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. 1 8MG2 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS MG3 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. 1 ND OS With NO contact (female connector with male end) MIROSWIH Operating features : 5 OERIONS ELERIL LIE (RESISIVE LOD): 5 OERIONS - 7 / 13.5 VD 4 OERIONS - 10 / 12 VD 4 OERIONS - 3 / 28 VD With N contact (male connector with female end)
29 SN-4 Side ype 8 8 Kit: SRING REURN O NEURL OSIION 8-1 Kit: 1 0 SRING REURN O NEURL OSIION. (2 OSIIONS) Kit: 0 2 SRING REURN O NEURL OSIION. (2 OSIIONS) ype Kit: DEEN IN OS. 1, 2 WIH SRING ENERED Kit: DEEN IN OS. 2 WIH SRING ENERED 9-3 Kit: DEEN IN OS. 1 WIH SRING ENERED 28
30 SN-4 ort Relief YE YE YE M M1 M2 M3 YE U U1 U2 U3 29
31 SN-4 Outlet ower eyond onversion plug (losed center plug) M M3 30
32 Memo 31
33
YOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH, IHUNG HSIEN, IWN 41468, RO. EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationMB-2 Chapters Monoblock Directional Control Valves
M-2 hapters Working condition.5 Ordering code.6 Dimensions.8 erformance data.9 Inlet relief options.1 Spool options.11 side options.14 side spool positioners.16 Inlet options.2 1 For Mobile nd Industrial
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :
More informationPart Number Spool Qty Max Flow Max Pressure Ports. 80 lpm
Monoblock Valves M5 Monoblock, 80 lpm, Max 315 ar art Number Spool Qty Max Flow Max ressure orts M5/1S3/18L/G4-6 ylinder 1 M5/2S3/18L/G4-6 ylinder 2 M5/3S3/18L/G4-6 ylinder 3 M5/4S3/18L/G4-6 ylinder 4
More informationMB-4 Chapters Monoblock Directional Control Valves
M-4 hapters Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34 M-4 2 2
More information45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
More informationHydro M t HYDRAULIC VALVES SN-4.
Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control
More informationCOMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main
More informationTESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement
More informationTESTO ITC KORINNA 28mm Allargato SECTIONAL DIRECTIONAL CONTROL VALVES
ESO IC KORINN 8mm llargato SECIONL DIRECIONL CONROL VLVES SD6 - DLS7 SD6 Simple, compact and heavy duty designed sectional valve from to sections for open and closed center hydraulic systems. H Fitted
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed center hydraulic systems.. H Fitted with
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional
More informationCOMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE rchivierung: 4/6 SD5 Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with
More informationMonoblock Directional Control Valve HDM11S/3PQ
Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3
More informationMONOBLOCK DIRECTIONAL CONTROL VALVE
MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 6 sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve
More informationSECTIONAL DIRECTIONAL CONTROL VALVES
SECIONL DIRECIONL CONROL VLVES SDS Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve and
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationDIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures
HYD RULI DIREIONL O NROL VLVES VES omponents For he ontrol Of Wide Range Of Operating Flows nd ressures V, DV, ND RORY DIREIONL ONROL VLVES; FOR FLOWS U O 20 GM (76 LM) ND WORKING RESSURES U O 2,500 SIG
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data
More informationX-Series. Load-Sensing Sectional Control Block. Table of contents
X-Series Load-Sensing Sectional ontrol lock -6 Nominal pressure: 5076 psi (350 bar) Nominal flow rate l ump port: 66 gpm (250 l/min) l Working ports: 42 gpm (160 l/min) with compensator and load holding
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves motion and progress 200--991210-N-03/09.2015 - - - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 Standard valves... p.101 Contents 8.1
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple
More informationHV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control
INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:
More informationSDS400. Sectional directional control valve
SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H03 5 gpm (19 L/min) nominal 10 000 psi (700 bar) H03 valves are rated for 5 gpm (19 L/min) nominal flow at pressures
More informationp max (see table of performances) Q max (see table of performances) MD1K MD1KD bar
41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-
More informationMONO-BLOCK DIRECTIONAL VALVE HDM 18 SERIES
Material specification: Standard features: Optional features available: Symbols: A/B H..C.O. RV 1 1 Weight CROSS HYDRAULICS Y LD YELLOW CAALOGUE age 2.45 HDM18/1 1 H..C.O. A B 1 RV HDM18/2/3/4 B B A A
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
More information-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14
Auxiliary valves Document: SCV-1-June 2013 Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 2/14 -Circuit mode... 2/14 -Dimensions... 3/14 -Dimensions... 4/14 -Lever mechanism...
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More informationDFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) NF D10, ISO-4401-10,
More informationDirectional Control Valve HDS21
Directional Control Valve Reference: 2--991232-N-2 Issue: 3.218 1/64 Contents age 1 General information... 4 1.1 Introduction... 4 1.2 Directional valve installation... 1.3 Fittings... 1.4 Hydraulic fluid...
More information油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189
ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with
More informationType : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil
ype : V20 Nominal Flow : 80 LM Maximum Flow : 135 LM (36 GM) Max. ressure : 350 ar (5000 psi) Medium : Mineral Oil Introduction: VELJN V20M Mobile directional control valve is a segment type design that
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationCONTROL VALVES
- 1 CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
More informationSDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE Directional control valves with direct acting solenoid SDE-SDE General informations Simple, compact and heavy duty designed sectional valves from to sections. SDE luminium alloy inlet sections,
More informationLOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS
Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating
More informationCONTROL VALVES
- 1 CONROL VALVES resentación de la compañía HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More information4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)
4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 6 Monobloc directional control valves Contents 6.1 General specifications 66 6.2 Dimensional data 67 6.3 Performances curves
More informationDirectional Control Valve HDS34
Directional Control Valve Load Sensing Reference: 2 991227 E Issue: 7.9 1/54 Contents age 1 General information................................................................ 4 1.1 Introductions..................................................................
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-8; 7 l/min (185 USgpm) 35 bar (5 psi) DG5V-8; 7 l/min (185 USgpm) 35 bar (5 psi) NF D8, ISO-441-8, CEO 8 Introduction General Description he Size 8 Directiona
More informationSDS180 DLS180. Sectional directional control valve
SDS8 DLS8 Sectional directional control valve SDS8/DLS8 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. Fitted with a main
More informationUmschaltventile Magnet
Umschaltventile Magnet DFE 52/2 und DFE52/3 estellnr. Typ 25-1-1 DFE52/318ES-W1-12VDC 25-1-11 DFE52/318ES-W1-24VDC -1465 DFE52/318ES-Y1-12VDC -147 DFE52/318ES-Y1-24VDC Weitere Umschaltventil Varianten
More informationCX3 SOLENOID OPERATING PROPORTIONAL CONTROL BANKABLE VALVES FEATURES ORDERING CODE HYDRAULIC SYMBOLS
CX3 SOLENOID OERING ROORIONL CONROL NKLE VLVES CX3 series valves are used for controlling fluid direction and flow rate as a function of the supply current to the proportional control solenoid. he individual
More information4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500
More informationBW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
More informationSECTION 1 Mobile Directional Control Valves
SECION Mobile Directional Control Valves Make Model age Hydrocontrol Galtech ucher ucher Galtech Galtech Galtech Galtech Galtech Galtech ucher Cross Cross rince ucher ucher ucher ucher Hydrocontrol Hydrocontrol
More informationDirectional Controls
VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................
More informationD07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
More informationV050 SERIES DIRECTIONAL CONTROL VALVE
V5 SERIES DIRECTIONAL CONTROL VALVE TAKE CONTROL Take control with Muncie Power Products V5 directional control valve. The V5 is constructed with high-grade iron castings and nickel-plated spools for use
More informationLUDV control block of sandwich plate design
LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar
More informationDirectional control valves NG6...NG32 D03...D10 6
Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI
More informationDirectional Controls
Vickers Directional Controls ilot Operated Directional Valves DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000
More informationNB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES
NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES Valve Series Page...... A 2 WALVOIL FRONT-END LOADER VALVES...
More information5.2 to 79 gpm 3000, 3600, 5000 psi
Modular Valve Series Modular Valve Series. to 79 gpm 000, 600, 000 Overview he modular valve is designed and engineered to integrate multiple hydraulic valve operations into a single unit, which eliminates
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
DIRECIONL VLVE OERION Directional Valve Features, Selection and Operating Recommendations CONC INFORMION US Headquarters Dynex/Rivett Inc. 770 Capitol Drive ewaukee, WI 3072 U.S.. el: 262-69-2222 FX: 262-69-032
More informationp max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
More informationmechanical control valve
DF Working conditions This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm /s -- 46 cst viscosity at 4 C temperature. DF5 DF DF DF5 N. of available ways --3--6
More informationRPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15.
REK-03 Modular Valve ssembly REK-03/ /0 D n 03 p max 50 bar (366 SI) Q max 60 l/min (5.8 GM) Compact modular valve system assembly Easy to build complex circuits he possibility of subsequent rebuilding
More informationOpen center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
More informationAuxiliary valves. Lever. Spool positioner Check valve Spool
Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet
More informationDirectional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
More informationSolenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a
More informationMobile control block, 6-way version sandwich plate design. Type SM12, series 1X RE /05.03
RE 64 /05.03 Replaces : 0.0 obile control block, 6-way version sandwich plate design ype S, series X Nominal size aximum pressure, pump side 50 / 350* bar aximum pressure, actuator side 300 / 400* bar
More information4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
More informationDirectional Control Valve CV550
www.nimco-controls.com Directional Control Valve CV550 Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page
More informationV250 SERIES DIRECTIONAL CONTROL VALVES
V SERIES DIRECTIONAL CONTROL VALVES TAKE CONTROL OF YOUR HYDRAULICS Take control with Muncie Power Products V directional control valve. The V is constructed with high-grade iron castings and nickel-plated
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICIONS D08H Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationORV-M45. Contents. Additional Informations
Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners
More informationCMF2 Series Applicable cylinder bore size: Max. ø160
4G/ M4G/ Individual wiring manifold ISO size 2 DIN terminal ox type 5 port pilot operated valve ISO conformed valve 2 Series pplicale cylinder ore size: Max. ø160 MN4G/ Common specifications 4G/ W4G/2
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK VALVE INDEX MONOBLOCK DIRECTIONAL CONTROL VALVES For mobile and industrial hydraulic applications. MA6 (6 GPM) General Specifications 4 Dimensions 5 Performance Chart 6 Ordering Code 7 MAV12
More information4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)
4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating
More informationDirectional Control Valves. Application. Features. Operation
Catalog HY14-2502/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More information280 Series Stainless Steel Rotary Direction Control Valve For hydraulics in a harsh environment.
280 Series Stainless Steel Rotary Direction ontrol Valve For hydraulics in a harsh environment. he 280 Series is a high pressure, 316 stainless steel, hydraulic rotary direction control valve. It is the
More informationSECTIONAL DIRECTIONAL VALVE HDS 30 SERIES. CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.106
CROSS HYDRAULICS PY LD YELLOW CAALOGUE Page 3.106 Material specification: Standard features: Optional features available: Symbols: P A/B H.P.C.O. RV P 1 1 Weight CROSS HYDRAULICS PY LD YELLOW CAALOGUE
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information Series D61VW General Series D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are
More informationSECTION A FRONT END LOADER VALVES
NB: models, Codes and Specifications may be subject to change without notice. SECTION A FRONT END LOADER VALVES Valve Series Nominal PAGE WALVOIL FRONT-END LOADER VALVES SDM102 Series... 45L/Min... A 14
More informationUmschaltventile DF20/3. mit Hebel Bestellnr. Typ Code
Umschaltventile DF/3 Bestellnr. Typ Code mit Hebel 4-- DF/3AL 64 4-- DF/3A7L 6744 4-- DF/3A7SLP 64 4-- DF/3AT7SLP 64 4-- DF/3BC7CB 674 4-- DF/3AC7CA-TAP(A) 64 4--3 DF/3B7MEIA-TAP(B) 648 4--4 DF/3AMB 6
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Catalog HY14-2500/US Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted
More informationSDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE6 Directional control valves with direct acting solenoid SDE-SDE6 Features Simle, comact and heavy duty designed sectional valve from to sections. Different tye of inlet covers. Different tyes of
More informationB8_58 (EDBZ-VEI) RE Edition: Replaces:
4/3 Directional valve elements 8_58 with or without EDZ-VEI) secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 8_58 EDZ-VEI) RE 183-54 Edition: 2.216 Replaces:
More informationACCESSORIES CONTENTS. HYDRAULIC DISC BRAKE for MP, MR and MS type LB/
ESSORIES ONTENTS age HYDRULI DIS RKE for M, MR and MS type L/288... 3 HYDRULI DIS RKE for MSS type LS/289(290) and MSV type LV/289(290)... 6 HYDRULI DIS RKE for MTS type LS/314(315) and MTV type LV/314(315)...
More informationDirectional Control Valves. Application. Features. Operation.
Catalog HY14-2500/US Introduction pplication Series D101 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More information