NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES

Transcription

1 NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES Valve Series Page A 2 WALVOIL FRONT-END LOADER VALVES... A 13 WALVOIL SECTIONAL VALVES A 17 WALVOIL PROPORTIONAL VALVES A 25 WALVOIL DIVERTER VALVES A 34 CABLE CONNECTION KITS A 42 JOYSTICK CABLE CONTROL A 43 OIL PILOT CONTROLS A 45 CONTROLLER HANDLES A 64 SOLENOID OPERATED VALVES ATOS SOLENOID VALVES A 67 MAXMA SOLENOID VALVES A 77 WALVOIL SERIES... FLOW... PAGE SDM080 Series... 25L/Min... A 2 SD4 Series... 45L/Min... A 3 SD5 Series... 45L/Min... A 4 SDM105 Series... 40L/Min... A 5 SD11 Series... 70L/Min... A 6 SDM140 Series... 80L/Min... A 7 SDM141Series... 80L/Min... A 8 SD14 Series L/Min... A 9 SD18 Series L/Min... A 10 MONOBLOCK SPOOLS A 11 NB: models, Codes and Specifications may be subject to change without notice.

2 SDM080 Series 1 to 4 sections for open and closed centre. Fitted with main pressure relief and load check. Available in parallel or tandem circuit. Optional carry-over port. 14mm Ø interchangeable spools. Available with Microswitch and remote cable control. Agricultural machinery, Truck Cranes, small overhead platforms. No. Spools Nom. Max. Press. P,A,B OPTIONS Max. Press. T DIM A (mm) L/Min BAR BAR P & T A & B SDM080/1/18/PSA 1 95 $POA SDM080/2/2X18/PSA $POA SDM080/3/3X18/PSA $POA SDM080/4/4X18/PSA $POA SDM080/5/5X18/PSA /8 1/4 223 $POA SDM080/6/6X18/PSA $POA The above s fitted with Cylinder Spools and Spring Centered. Type Code Description 1,2,3,4 Spool - Please refer to Page A11 No Extra 11 5V Detent 3 Position $POA AE 4TAP Plug - High Pressure Carry Over $POA AEK 4TAP Plug - High Pressure Carry Over (3/8 plug re.) $POA LCB 5CLO Joystick - mechanical $POA Micro Switch (1st Spool) Micro Switch (Additional Spool) Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List A2 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004

3 A41 SD4 Series Simple, compact design - single section for open and closed centre. Fitted with main pressure relief. 16mm Ø interchangeable spools. Available with remote cable control. Small tractors, log splitters, small dumpers, workshop press. Nominal Nominal Pressure L/MIN BAR P.A.B.T. SD4/1/ / 2 $POA The above unit is fitted with a cylinder spool and spring centered. Type Code Description 1,2,3,4,6,7 Spool please refer to Page A11 No Extra 8 5V Spring Centre Kit $POA 11 5V DETENT KIT 3 POSITION $POA 12 5V DETENT KIT 2 POSITION (1,2) $POA 15 5V DETENT KIT 2 POSITION (0,1) $POA Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A3

4 SD5 Series Simple, compact and heavy duty design - 1 to 7 sections for open and closed centre. Fitted with main pressure relief and load check. Available in parallel, series or tandem circuit. Optional carry-over port. 16mm Ø interchangeable spools. Available with solenoid and remote cable control. Harvesting machinery, brush cutters, front-loaders, truck cranes, dumpers. No. Spools Nom. Max. Pressure P,A,B Max. Pressure on T DIM A L/MIN BAR BAR SD5/1/ $POA SD5/2/2X $POA SD5/3/3X $POA /8 SD5/4/4X $POA SD5/5/5X $POA SD5/6/6X $POA SD5/7/7X $POA The Above s With Cylinder Spools and Spring Centered Type Code Description 2,3,4,6,7 Spool - Please refer to Page A11 No Extra 8 5V Spring Centre Kit (Standard) $POA 11 5V Detent 3 Position $POA 15 5V Detent 2 Position 0 & 1 $POA 513 **SD th Position Float $POA AE 3XGIU Plug - High Pressure Carry Over $POA AEK 3XTAP Plug - Closed Centre $POA AET 3XTAP Plug - Open Centre (Standard) $POA PL 5V Pneumatic Control $POA LCB 5CLO Joystick (on 2 spools) $POA 8IM 5IDR Hydraulic Pilot - Proportional 5-15 BAR $POA ES3 5V Solenoid Control 12 Volt (2 sides) $POA ES3 5V Solenoid Control 24 Volt (2 sides) $POA MS Micro Switch (Requires 8MS1/2/3)(1 Off required per Valve) $POA 8MS1/2/3 **SD5-8MS1/2/3 Micro Switch Striker KIT (1 Off required per Spool)(A/B/A&B) $POA 8MG1/2/3 5V Micro Switch - long life sealed unit(1 off req. per spool) $POA 2RL 5ROT/SD5 Rotary Spool Kit $POA Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List A4 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004

5 SDM105 Series These units are fitted with a pressure compensated flow regulator on the inlet port to provide fine tuning of the actuator speeds, it can also be fitted with a solenoid unloader valve which enables remote stop/start. No. Spools SDM105/1/M/18L/LT 1 Nom. Max.Pres. P,A,B Max. Press. on T Dim.A L/MIN BAR BAR P & T A&B mm $POA SDM105/2/M/2X18L/LT $POA SDM105/3/M/3X18L/LT $POA /8 3/8 SDM105/4/M/4X18L/LT $POA SDM105/5/M/5X18L/LT $POA SDM105/6/M/6X18L/LT $POA The above with cylinder spool, spring centered and without solenoid unloader. Type Code Description 1,2 SPOOL OPTIONS - Please refer to Page A11 NO EXTRA 11 5V DETENT KIT 3 POSITION $POA EL YCAR UNLOADER, SOLENOID OPERATED 12 or 24 VDC $POA The above are add on s - Not necessarily spare parts List April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A5

6 SD11 Series Simple, compact and heavy duty design - 1 to 6 sections for open and closed centre. Available in parallel or series circuit. Optional carry over port. 20mm Ø interchangeable spools. Available with electro-hydraulic and remote cable control. Tilting vehicles, silage chopper-mixers, cranes. No. Spools Nom. Max. Pressure P,A,B Max. Pressure on T DIM L/MIN BAR BAR P,A,B T A SD11/1/ $POA SD11/2/2X $POA SD11/3/3X / $POA / 4 SD11/4/4X $POA SD11/5/5X $POA SD11/6/6X $POA Type Code Description 2,3,4,5,7 Spool - Please refer to Page A11 No Extra 11 5V Detent 3 Position $POA 15 5V Detent 2 Position 0 & 1 $POA 513 **SD th Position Float $POA AE 3XGIU Plug - High Pressure Carry Over $POA AEK 3XTAP Plug - Closed Centre $POA PL 5V Pneumatic Control ON/OFF $POA 8PC 5V Pneumatic control Proportional $POA 8IM 5IDR Hydraulic Pilot BAR Range(max. Pilot =50 Bar) $POA LCB 5CLO Joystick (on 2 spools) $POA 2RL 5ROT/SD11 Rotary Spool Kit $POA Cable Control -(Refer to page A 39) The above are add on s - Not necessarily spare parts List Power beyond Closed centre A6 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004

7 SDM140 Series Fitted with direct or pilot operated main pressure relief. Independent load check per spool. Available in parallel circuit only. Optional carry-over port. 18mm Ø interchangeable spools. Available with manual, electro-hydraulic and remote cable control. Service. Agricultural machinery, harvesters, front-loaders, earth movers, dumpers, shovels and mobile cranes. Nominal Max. Press. P.A.B. Max Press on T No. of DIM A (mm) Spools L/MIN BAR BAR P.C.T. A. B. SDM140/1/ $POA SDM140/2/2X $POA SDM140/3/3X $POA /4 1/2 SDM140/4/4X $POA SDM140/5/5X $POA SDM140/6/6X $POA The above with Cylinder Spool and Spring Centered. Type Code Description 1,2,3,4 Spool please refer to Page A11 No Extra 8 5V Spring Centre Kit $POA 11 5V DETENT KIT - 3 POSITION $POA 15 5V DETENT KIT 2 POSITION (0,1) $POA AE XGIU G 3/4 carry--over sleeve $POA AEK XGIU Plug for closed centre circuit $POA LCB 5CLO Joystick lever for 2 sections $POA Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A7

8 SDM141 Series Simple, compact and heavy duty design - 3 sections for open centre. Fitted with main pressure relief. Available with series circuit only. Optional carry-over port. A wide variety of service port valves. Available with manual, electro-hydraulic and remote cable control. 18mm Ø interchangeable spools. Skid-steer loaders. Nominal Nominal Pressure L/MIN BAR P.C.T. A. B. SDM141/3/3X /4 1/2 $POA Type Code Description 1,5 Spool options please refer to Page A11 No Extra AE XGIU G 3/4 carry--over sleeve $POA L 5LEV Standard lever box $POA The above are add on s - Not necessarily spare parts List A8 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004

9 SD14 Series Simple, compact design - single section for open and closed centre. Equipped with on/off electro-hydraulic control. Fitted with main pressure relief. 20mm Ø interchangeable spools. Available with manual, pneumatic, electro-hydraulic and remote cable control. Brush cutters, silage chopper-mixers, log splitters. Nominal Max. Press. P.A.B. Max. Press on T L/MIN BAR BAR P.A.B.T. SD14/1/ / 4 $POA The above unit is fitted with a cylinder spool and spring centered. Type Code Description 1,2,3,4,6,7 Spool options please refer to Page A11 No Extra 8 5V Spring Centre Kit $POA 12 5V DETENT KIT 2 POSITION (1,2) $POA 11 5V DETENT KIT 3 POSITION $POA 15 5V DETENT KIT 2 POSITION (0,1) $POA Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A9

10 SD18 Series Simple, compact and heavy duty design - 1 to 6 sections for open and closed centre. Fitted with direct or pilot operated main pressure relief. Available in parallel circuit only. Optional carry over port. 25mm Ø interchangeable spools. Available with manual and electro-hydraulic control. Control motors, large brush cutters, trash compactors and drain systems. No. Spools Nom. Max. Pressure P,A,B Max. Pressure on T DIM L/MIN BAR BAR P,A,B,C T A SD18/1/ $POA SD18/2/2X / $POA SD18/3/3X $POA Type Description 1,2,3,4,7 Spool - Please refer to Page A11 No Extra 11 5V Detent 3 Position $POA 15 5V Detent 2 Position 0 & 1 $POA AE 3XGIU Plug - High Pressure Carry Over $POA AEK 3XTAP Plug - Closed Centre $POA PL 5V Pneumatic Control on/off $POA 8IM 5IDR Hydraulic Pilot - Proportional 6-26 Bar (50 Bar Max.) $POA Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List A10 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004

11 MONOBLOCK SPOOLS SDM080 SD4 SD5 SD14 SDM140 SD18 SPOOL 4th Pos Float VALVE SERIES SPOOL TYPE model LIST PRICE SD5 5 3CU * $POA SD11 5 3CU * $POA NB: This option requires a modified body. VALVE SERIES SD11 SPOOL TYPES CYLINDER MOTOR SINGLE ACT- ING ON A SINGLE ACT- ING ON B ALL PORTS CLOSED P CLOSED A & B TO T SDM080 3CU CU CU CU N/A N/A $POA SD4 1CP =3CU CU CU CU CU CU $POA 1N = 3CU SD5 3CU CU CU CU CU CU $POA SD11 3CU CU CU CU CU CU $POA SDM140 3CU CU CU CU N/A N/A $POA SD18 3CU CU CU CU N/A N/A $POA NB: The above prices are spare part prices and are not additional to the valve price April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A11

12 A12 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004