SECTION A OIL PILOT CONTROLS
|
|
- Loreen Ray
- 6 years ago
- Views:
Transcription
1 NB: models, Codes and Specifications may be subject to change without notice. SECTION A OIL PILOT CONTROLS SVM400 ** NEW ** SV10 SV20 SV30 SVP500 SV40 SV50/51 SV60 SV70 Valve Series PAGE HYDRAULIC PILOT VALVES SVM400 Series A 46 SV10 Series A 48 SV20 Series A 49 SV30 Series A 50 SV40 Series A 52 SV60 Series A 53 SV70 Series A 54 CURVE OPTIONS FOR SV Series A 55 SV50 Series A 56 SVP500 Series A 57 CONTROLLER HANDLES A 64 NB: models, Codes and Specifications may be subject to change without notice.
2 HYDRAULIC PILOT VALVES SVM400 Series Monoblock Dual Axis Joystick Hydraulic Pilot Valve with 1 lever and 4 workports for simultaneous operation of 2 valve sections. Type MIN L/MIN MAX L/MIN Max Max Back Press on T SVM400/01B/01W-M001A The above unit is fitted with spring Curve Kit 001A = 5.8 to 22 - Please refer to Page A53 for other available Spring Curve Kits. TYPE - 01 TYPE - 09 TYPE - 16 Spring return in neutral position. Cross movement selector. Movement detection on each port. A46 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
3 SVM400 OPTIONS The pictures below show the rubber boot configurations available for the SVM400 series pilot operated valve, relative to the different handle options. Series 10 - optional handles W: Without switches X: With upper spring return push-button Z: With upper detent push-button Y: With 3 position spring return rocker switch K: With upper protected spring return push-button T: With 3 position detent rocker switch Series 40 - optional handles H: Fitted with up to 8 microswitch push-button, with rocker switch and dead man switch. HW: Fitted with up to 4 push-buttons (400mA types), with dead man switch. HT: Fitted with up to 4 push-buttons (5A types), with rocker switch, dead man switch and ON/OFF switch. HZ: With potentiometer, fitted with up to 2 microswitch push-button, dead man and ON/OFF switch. April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A47
4 SV10 Series HYDRAULIC PILOT VALVES Monoblock Single Axis Joystick Hydraulic Pilot Valve with 1 lever and 2 work ports. For Handle Options - Please refer to page A57. Image: SV10 Type Max Back Min Max. Max Press on T L/MIN L/MIN The above unit is fitted with spring Curve Kit 001A = 5.8 to 22 - Please refer to Page A53 for other available Spring Curve Kits. SV10-B/01G-001A-001A A48 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
5 HYDRAULIC PILOT VALVES SV20 Series Monoblock Hydraulic Pilot Valve with 2 levers and 4 work ports. For Handle Options - Please refer to page A63. Image: SV20 Type Max Back Min Max. Max Press on T L/MIN L/MIN The above unit is fitted with spring Curve Kit 001A = 5.8 to 22 - Please refer to Page A49 for other available Spring Curve Kits. SV20-B/01G-001A-X April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A49
6 SV30 Series HYDRAULIC PILOT VALVES Sectional Hydraulic Pilot Valves with 3 to 7 levers. For Handle Options - Please refer to page A63. Image: SV30 Type SV30/3-B/01G-001A-X6 SV30/4-B/01G-001A-X8 SV30/5-B/01G-001A-X10 SV30/6-B/01G-001A-X12 SV30/7-B/01G-001A-X14 MIN Max. Press on A Max L/MIN L/MIN Max Back Press on T The above unit is fitted with spring Curve Kit 001A = 5.8 to 22 - Please refer to Page A53 for other available Spring Curve Kits. A50 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
7 CONTROL OPTIONS for SV10, SV20, SV30 STANDARD 01 Control - Spring centred to neutral position. (STANDARD) 03 Control - With friction (stop in any position) and neutral sensing. 05 Control - Detent in position 1, spring centred to neutral position. 06 Control - Detent in position 2, spring centred to neutral position. 07 Control - Detent in position 1 and 2, spring centred to neutral position. 02 Control Detent in neutral, lift to release. 10 Control - With friction (stop in any position). Detent in neutral, lift to release. 11 Control - Detent in positions 1 and 2. Detent in neutral, lift to release. For pricing and technical information please contact one of our sales staff. April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A51
8 SV40 Series HYDRAULIC PILOT VALVES Monoblock Hydraulic Pilot Valve with 2 foot pedals and 2 work ports. Image: SV40 Min Max. Max Max Back Press on T L/MIN L/MIN SV40-B/001C-001C The above unit is fitted with spring Curve Kit 001C = 5.8 to 22 - Please refer to Page A55 for other available Spring Curve Kits. A52 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
9 HYDRAULIC PILOT VALVES SV60 Series Monoblock Hydraulic Pilot Valve with 2 foot pedals and 2 work ports. Image: SV60 Max Back Min Max. Max Press on T L/MIN L/MIN SV60-B/001C The above unit is fitted with spring Curve Kit 001C = 5.8 to 22 - Please refer to Page A55 for other available Spring Centre Kits. April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A53
10 SV70 Series HYDRAULIC PILOT VALVES SV70 - Monoblock Unit with screw adjustable knobs 1 x work port. SV71 - Monoblock Unit with push button 1 x work port. Image: SV70 Type SV70-B/001C SV71-B/001C Max Back Min Max. Max Press on T L/MIN L/MIN The above unit is fitted with spring Curve Kit 001C = 5.8 to 22 - Please refer to Page A55 for other available Spring Centre Kits. SV70 SV71 A54 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
11 CURVE OPTIONS FOR SV Series 0... Pressure control curves with STEP. TYPE PRESSUE STROKE mm TYPE PRESSURE STROKE mm A B C D A B C D Pressure control curves without STEP. TYPE PRESSUE STROKE mm TYPE PRESSURE STROKE mm A B C D A B C D April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A55
12 SV50 Series HYDRAULIC PILOT VALVES Monoblock Hydraulic Pilot Valve with 2 way rocker pedal. Image: SV50 Type Min Max. Max Max Back Press on T SV50-B/001C-001C SV51-B/001C-001C L/MIN L/MIN The above unit is fitted with spring Curve Kit 001C = 5.8 to 22 - Please refer to Page A55 for other available Spring Curve Kits. ANGLED ROCKER PEDAL - SV51 A56 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
13 HYDRAULIC PILOT VALVES SVP500 Series Monoblock Hydraulic Pilot Valve with Rocker, Foot Pedal and 2 work ports. Image: SVP500 Type SVP500-B/01-P051BX2 SVP510-B/01-P051BX2 Min Max. Max Press on P Max Back Press on T L/MIN L/MIN The above unit is fitted with spring Curve Kit 001C = 5.8 to 22. SVP510 Monoblock angled rocker pedal SVP500 April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A57
14 A58 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
APPLICATION AND SWITCH ORDERING GUIDE
APPLICATION AND SWITCH ORDERING GUIDE CUSTOMER: DATE: CONTACT: PHONE: FAX: 1) APPLICATION INDOOR OUTDOOR MARINE ENVIRONMENT MOBILE EQUIPMENT OVERHEAD CRANE/HOISTING CRANE CHAIR PORTABLE EQUIPMENT FOOT
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More informationPRODUCT OVERVIEW. Our Mission:
PRODUCT OVERVIEW Material Handling Construction Agriculture Waste Management Industrial Our Mission: Brand Hydraulics Co. will conduct business with integrity and strive to exceed customer expectations
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
More informationCartridge Valves Technical Information. Spreader Valves. Spreader Valves SCHEMATIC MODEL PRESSURE FLOW* WEIGHT SPR-2FFL12 SPR-2FFLC12 SPR-2FFLW86
SPR-2FFL12, SPR-2FFLC12 & SPR-2FFLW86 SCHEMATIC MODEL PRESSURE FLOW* WEIGHT Page 2 SPR-2FFL12 138 bar [2000 psi] [30 US g/m] 2.62 kg [5.90 lb] Spreader Valve, Dual Flow Regulation, Compensated, Manual
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK VALVE INDEX MONOBLOCK DIRECTIONAL CONTROL VALVES For mobile and industrial hydraulic applications. MA6 (6 GPM) General Specifications 4 Dimensions 5 Performance Chart 6 Ordering Code 7 MAV12
More informationSpreader Valves SPR-2FFL12, SPR-2FFLC12 & SPR-2FFLW86
Spreader Valves, & SCHEMATIC MODEL PRESSURE FLOW* WEIGHT Quick Reference Page 3 Spreader Valve, Dual Flow Regulation, Compensated, Manual Dump, Gear Pump Circuit 138 bar [2000 psi] [30 US g/m] 2.62 kg
More informationPilot control unit with end position lock for the remote control of directional valves
Pilot control unit with end position lock for the remote control of directional valves RE 64 553/02.07 1/12 Replaces : 05.05 Type 4THF6 or 5THF6 Series 2X Contents Functional description, section, symbol
More informationAPPLICATION AND SWITCH ORDERING GUIDE
APPLICATION AND SWITCH ORDERING GUIDE CUSTOMER: DATE: CONTACT: PHONE: FAX: 1) APPLICATION INDOOR OUTDOOR MARINE ENVIRONMENT MOBILE EQUIPMENT OVERHEAD CRANE/HOISTING CRANE CHAIR PORTABLE EQUIPMENT FOOT
More informationContents. Directional Control Valve 2 Series CV Unibody. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves
Contents Page 3-4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11-12 Page 13 Page 14 Page 15 General Information Technical data Performance Curves Dimensions - Basic Valve Dimensions - Unibody Secondary
More informationHydraulic Remote Control with STC Port Option Technical Focus
2 2 3 4 2 Hydraulic Remote Control with SC ort Option echnical Focus HRC HRC2-2 HRC2-R HRC2-S HRC4-J able of Contents General Description...4 SC erformance Characteristics...5 How to Use...6 Operating
More informationSECTION A FRONT END LOADER VALVES
NB: models, Codes and Specifications may be subject to change without notice. SECTION A FRONT END LOADER VALVES Valve Series Nominal PAGE WALVOIL FRONT-END LOADER VALVES SDM102 Series... 45L/Min... A 14
More informationNB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES
NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES Valve Series Page...... A 2 WALVOIL FRONT-END LOADER VALVES...
More informationdirectional lever control valves
directional lever control valves directional lever control valves Directional Lever Control Valves Directional Control Valves - Monoblock Directional Control Valves - Sectional Directional Control Valves
More informationAuxiliary valves. Lever. Spool positioner Check valve Spool
Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More informationHydraulic pilot control unit of sandwich plate design for the remote control of directional valves, pumps, motors
Hydraulic pilot control unit of sandwich plate design for the remote control of directional valves, pumps, motors RE 64 55/05.06 1/8 Replaces: 05.03 ype H6 Series 1X Contents Functional description, section
More informationContents. Directional Control Valve 3 Series CV 452. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves.
Contents Page 3-4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 General Information Technical data Performance Curves Dimensions - Basics Valve Dimensions - LS Valve Secondary
More informationCustomizing the Basic Control Handle
INTRODUCTION Customizing the Basic Control Handle Issued: July 999 The MCHXXX Control Handle is intended for use in openloop systems controlling Danfoss hydrostatic pumps with an Electrical Displacement
More informationMidget & Intermediate Valves B43/53 Series
Midget & Intermediate Valves B43/53 Series The compact design of these valves make them a popular choice for manual or mechanical operation and their modular construction permit different operators to
More informationVINCKE INDUSTRIAL HYDRAULIC VALVES INTRODUCTION
INTRODUCTION 4 Introduction Hydraulic valves, in addition to the force density advantage of actuators, are what help make hydraulics unique in their control of force, torque and motion. Valves govern direction,
More informationMonoblock Directional Control Valve PMB22TSTSAB PMB23TSTSTSLB PMB21TDLB
Engineering & Manufacturing Solutions Specifications: FLOW RATINGS: - MB21 & MB22 10 gpm (38 lpm) - MB23 8 gpm (30 lpm) Rated up to 4000 psi (275 bar). Port Sizes: - Inlet/Outlet #8 SAE. -Work Ports #8
More informationContents. Directional Control Valve 2 Series CV 300
Contents Page 3 General Information Page 4 Technical data Page 5 Dimensions Page 6 Secondary Valves Page 7 Cylinder port mounted secondary valves Page8 Spool - Control characteristics Page 9-10 Spool Controls
More informationModel Stroke, Two Handle Push Pull Control Head
Model 2009 3 Stroke, Two Handle Push Pull Control Head This control is available with three different handles; standard, handles with plastic grips or curved handles with knobs. An optional clutch and
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 6 Monobloc directional control valves Contents 6.1 General specifications 66 6.2 Dimensional data 67 6.3 Performances curves
More informationLOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS
Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating
More information5. Shift and Select Mechanism
5. Shift and Select Mechanism SHIFT AND SELECT MECHANISM! The shifter fork and fork rods have a detent mechanism using a plunger with a ball in it and is supported with a slidable ball bearing. The detent
More informationHYDRAULIC PILOT CONTROL UNIT OF SANDWICH PLATE DESIGN
01 /10 2.2 HYDRULIC PILOT CONTROL UNIT OF SNDWICH PLTE DESIGN Type: H*-2TH6 Benefits: Progressive, sensitive control Precise and play-free control characteristics Low actuation force at the lever Rust-free
More informationproduct card NEW RELEASE HYDRAULIC REMOTE CONTROLS PATENT PENDING E TM
product card NEW RELEASE HYDRAULIC REMOE CONROLS AEN ENDING E0.09.0302.02.00 M ALICAIONS: he serie has been designed to control the servopilot hydraulic circuit of directional control valves, hydrostatic
More informationPage 3 Page 4 Page 6 Page 8 Page 9 Page 10 Page 11
Contents Page 3 Page 4 Page 6 Page 8 Page 9 Page 10 Page 11 General Information Compact Loader Valves Medium Size Loader Valves Large Size Loader Valves 3rd, 4th and 5th Function Valves Cable Joystick
More information-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14
Auxiliary valves Document: SCV-1-June 2013 Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 2/14 -Circuit mode... 2/14 -Dimensions... 3/14 -Dimensions... 4/14 -Lever mechanism...
More informationIntroduction. Pressure drops
Directional control valves CETOP 5/NG0 Introduction The ARON directional control valves NG0 designed for subplate mounting with an interface in accordance with UNI ISO 440-05 - 04-0 - 94 standard (ex CETOP
More information4000 series Industrial resistive joysticks
The 4000 Series is a range of robust, industrial quality potentiometer joysticks for internal and external applications. All 4000 Series share the same, all metal mechanism to provide the finest performance
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances
More informationSeries 77. Miniature 3/2 Valves PUSH BUTTON TOGGLE LEVER SPRING RETURN WITH DETENT ONE WAY ROLLER ROLLER AIR PILOT FINGER BUTTON BALL PLUNGER
Miniature 3/2 Valves TOGGLE LEVER 77.1130 1/8 77.1131 1/8 ROLLER ONE WAY ROLLER - N/O or N/C application - Aluminum alloy 125 PSI -10 C to 60 C (14 F to 140 F) 77.1132 1/8 77.1133 1/8 BALL PLUNGER AIR
More information3-M69 You created this PDF from an application that is not licensed to print to novapdf printer (
(1) Release Lever 1 (2) Cruise Release Rod (3) Cruise holding Spring (4) Cruise Control Lever (5) Friction Plate (6) Friction Disk (7) Release Rod (9) Trunnion Shaft (10) HST Pedal (11) Control Lever Arm
More informationAPEM SERIES - POTENTIOMETER JOYSTICKS TWO STANDARD MOUNTING OPTIONS LOW CURRENT DRAIN IP65 ABOVE PANEL.
R 2.65 51.20 18.20 1.85 R 3.00 17.50 dia APEM R 4.50 28.75 3.60 4000 SERIES - POTENTIOMETER JOYSTICKS TWO STANDARD MOUNTING OPTIONS LOW CURRENT DRAIN IP65 ABOVE PANEL VARIETY OF POTENTIOMETER OPTIONS ROBUST,
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
More informationDirectional Control Valve Equipment for Front End Loaders
Directional Control Valve Equipment for Front End Loaders CONTENT nimco Page 3 General Information Page 4 Page 5 Page 7 Page 11 Page 12 Technical Data Application Example System Options Quickview Flow
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC VALVES SECTION 3A HYDRAULIC CONTROL VALVES MONOBLOCK DIRECTIONAL CONTROL VALVES...71 SLICE DIRECTIONAL CONTROL VALVES...73 HANDLEVERS...76 S additions for valves...76 VALVE CONTROL KITS additions
More informationDirectional Control Valve CV550
www.nimco-controls.com Directional Control Valve CV550 Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page
More informationXT912 Microlight Trike Hand Control Equipment
XT912 Microlight Trike Hand Control Equipment The following information details the hand control equipment and other minor adaptations that have been undertaken to allow me to independently and safely
More informationRemote controls with flexible cables
Remote controls with flexible cables Remote controls Additional information This catalogue shows the product in the most standard configurations. Please contact our Sales Dpt. for more detailed information
More informationAC-500 HOT SURFACE IGNITION & I.I.D.SPARK IGNITION VERTICALLY FIRED GAS CONVECTION OVEN REPLACEMENT PARTS LIST
AC-00 HOT SURFACE IGNITION & I.I.D.SPARK IGNITION VERTICALLY FIRED GAS CONVECTION OVEN REPLACEMENT PARTS LIST EFFECTIVE APRIL 9, 0 Superseding All Previous Parts Lists. The Company reserves the right to
More informationPhased Out Products. Proportional Valve Group PVG 83. Tech Note MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Tech Note Proportional Valve Group PVG 83 Valve system PVG 83 is a hydraulic load sensing valve designed to give the customer just the valve he needs. From a simple load sensing
More informationRL/M BLU SERIES. Low NOx Modulating Light Oil Burners FIRING RATES. LOW NOx T. M 190/ kw M 223/ kw
LOW NOx T The RL/M BLU burners series covers a firing range from 360 to 1023 kw, and it has been designed for use in hot or superheated water boilers, hot air or steam generators and diathermic oil boilers.
More informationTGS LEVER 1. INTRODUCTION. 1) Components
0-3 1. INTRODUCTION The TGS lever prevents inappropriate or unexpected shifting of gears to increase safety. It also helps the driver safely select a needed gear. The solenoid of the TGS lever has the
More informationHYDRAULICS VINCKE INDUSTRIAL HYDRAULIC VALVES
VINCKE INDUSTRIAL HYDRAULIC VALVES TECH-VIHV-200.1 index 3 link to your page / link a su página 4VNKSV Directional on/off control 4 3 CETOP 3 3 CETOP 5 7 10 4VNKEH Electro-hydraulic directional control
More informationDIRECTIONAL CONTROL VALVES CETOP 3/NG6
CETOP 3/NG06 STANDARD SPOOLS CH. I PAGE 0 AD.3.E... CH. I PAGE AD.3.E...J* CH. I PAGE 2 AD3.XS... CH. I PAGE 3 AD3.XD... CH. I PAGE 4 AD.3.V... CH. I PAGE 5 AD.3.L... CH. I PAGE 6 OTHER OPERATOR CH. I
More informationDEL HYDRAULICS AIR CONTROL CATALOG
DEL HYDRAULICS AIR CONTROL CATALOG www.del.us.com 2 Dump Truck Valves AIR CONTROL VALVES DAV 1201: On-Off Air Valve DAV 1202: Dump Pump Air Valve DAV 1203: Dump Pump Valve with Automatic PTO Disengagement
More informationSTANDARD FEATURES. Flow Control Inlet
Directional Control Valves SECTIONAL BODY Model SV STANDARD FEATURES -0 Sections Per Valve Bank Differential Poppet Style Relief, Adjustable Load Checks On Each Section from 500 to 3000 psi (Also available
More informationPlantinum Series Control Installation Instructions Standard, Billet and Arched handles
715 Center Street Grayslake IL 60030 P: 847-752-2700 F: 847-752-2415 Plantinum Series Control Installation Instructions Standard, Billet and Arched handles Thank you for choosing Livorsi Marine controls.
More informationPage 3 Page 4 Page 5 Page 6 Page 7 Page 8-9 Page 10 Page 11
Contents Page 3 Page 4 Page 5 Page 6 Page 7 Page 8-9 Page 10 Page 11 General Information Assembly Dimensions Joystick Movements Technical data Order Code Configurations Optional Handgrip Inserts Assembly
More informationth Street, Surrey, B.C. Canada V3W 0A6 Telephone Fax July 2012
8238-129 th Street, Surrey, B.C. Canada V3W 0A6 Telephone 604-572-3935 Fax 604-590-8313 http://www.kobelt.com 7173-KAS MANUAL July 2012 Leaders in Quality Marine Controls, Steering Gear, and Disc Brakes.
More informationOUTSTANDING PERFORMANCE
ENGINEERED TO MOVE OUTSTANDING PERFORMANCE ON A GLOBAL SCALE We can demonstrate a proven ability to meet the needs of our customers and to support world leaders in their individual fields. It s not just
More informationVALVES HYDRAULIC SOLUTION SPECIALISTS DISCLAIMER
DISCLAIMER > All performance and specification figures are where possible taken from the latest documentation and may vary from older literature versions. > Product photos shown are indicative only. Actual
More information4000 series Industrial resistive joysticks
CABLE 4000 series TECHNICAL Distinctive features and specifications Two standard mounting options Low current drain Variety of potentiometer options Robust All metal mechanism IP65 above panel Inherently
More informationApplication Software Dual Path Control DPC
Industrial Hydraulics lectric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Application Software Dual Path Control DPC R 95 325/03.04 Version
More informationCompact Excavators
430 435 Compact Excavators 1 Improve your swing... and your drive Contractors... Landscapers... Utilities... Rental Operators... The Bobcat 430 and 435 are the world s first compact excavators with Zero
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional
More informationFES112 HIGH SECURITY ELECTRIC CUSTODIAL STRIKE INSTALLATION MANUAL
FES112 HIGH SECURITY ELECTRIC CUSTODIAL STRIKE INSTALLATION MANUAL 1 P age 1. INTRODUCTION The FES112 High Security Electric Custodial Strike was purposely designed for heavy duty high security applications
More informationContents. Quality Hydraulic Components from the Webtec Range. Introduction. Hydraulic Flow Control Valves
Quality Hydraulic Components from the Webtec Range Contents Description Section Webtec Products Ltd Introduction 1 Hydraulic Flow Control Valves 2 Hydraulic Directional Control Valves and Check Valves
More informationDIRECTIONAL CONTROL VALVES CETOP 5/NG10
INTRODUCTION The ARON directional control valves NG0 designed for subplate mounting with an interface in accordance with UNI ISO 440-05 - 04-0 - 94 standard (ex CTOP R 35 H 4.2-4-05), and can be used in
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More informationEManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves 200 P 991210 E 03 / 10.04 1/220 2 Monobloc directional control valves HDM140 Contents 2.1 General specifications 9 2.2 Dimensional data 10 2.3 Performances
More informationMP18 Stacking Valve System Technical Information Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18 Stacking Valve System Technical Information Manual The Drive & Control Company Copyright 1996 Bosch
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
More informationPilot-Operated Pressure Relief Valve Series RM
Characteristics Pilot-Operated Relief alve The pilot-operated pressure relief valves from the Parker Manapak series RM are sandwich plate valves designed for stacking beneath a directional valve with a
More informationProportional Valve Group PVG 16
MAKING MODERN LIVING POSSIBLE Technical Information Proportional Valve Group PVG 16 powersolutions.danfoss.com Revision History Table of Revisions Date Changed Rev Jan 2014 Converted to Danfoss layout
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
More informationMP18/SIC & SIO Stacking Valve System Technical Information Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18/SIC & SIO Stacking Valve System Technical Information Manual The Drive & Control Company Copyright
More informationPilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
More informationInstallation Instructions for Catalog No MAGNUM GRIP GATED SHIFTER for POLARIS RZR 900cc, 1000cc and TURBO (WITH BOOT)
Installation Instructions for Catalog No. MAGNUM GRIP GATED SHIFTER for 2014 2018 POLARIS RZR 900cc, 1000cc and TURBO (WITH BOOT) 1 2 3 4 5 6 Page 1 of 7 Installation Instructions for Catalog No. MAGNUM
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :
More informationRemote controls with flexible cables TECHNICAL CATALOG
Remote controls with flexible cables TECHNICAL CATALOG Remote controls Additional information This catalogue shows the product in the most standard configurations. Please contact our Sales Dpt. for more
More informationPilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
More informationEManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -
More informationFlow sharing control block in mono block / sandwich plate design M6-15
Flow sharing control block in mono block / sandwich plate design M6-15 RE 64321 Edition: 01.2015 Replaces: 05.2012 Size 15 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420
More informationV250 SERIES DIRECTIONAL CONTROL VALVES
V SERIES DIRECTIONAL CONTROL VALVES TAKE CONTROL OF YOUR HYDRAULICS Take control with Muncie Power Products V directional control valve. The V is constructed with high-grade iron castings and nickel-plated
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More information45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
More informationAJN Joystick. Introduction. Main Features. Custom Modifications. Electrical SPECIFICATIONS
AJN Joystick Introduction The AJN Joystick from Sensata Technologies provides the reliability and long life required in demanding environmental conditions such as heavy duty industrial applications. Building
More informationFlow sharing control block in mono block / sandwich plate design M6-22
Flow sharing control block in mono block / sandwich plate design M6-22 RE 64322 Edition: 01.2015 Replaces: 05.2012 Size 22 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420
More informationProportional Valve Group PVG 32
MAKING MODERN LIVING POSSIBLE Technical Information Proportional Valve Group PVG 32 powersolutions.danfoss.com Revision History Table of Revisions Date Changed Rev Feb 214 Spec. sheet update HE Jan 214
More informationHYDRAULICS VINCKE DIRECTIONAL CONTROL VALVES
VINCKE DIRECTIONAL CONTROL VALVES TECH-DCV200.1 index 3 link to your page / link a su página Monoblock hydraulic distributors Monoblock hydraulic distributors 35 liters 3 P35 Monoblock hydraulic directional
More informationac-500 hot surface ignition & i.i.d.spark ignition vertically fired gas convection oven
ac-00 hot surface ignition & i.i.d.spark ignition vertically fired gas convection oven REPLACEMENT PARTS LIST Effective june, 0 Superseding All Previous Parts Lists. The Company reserves the right to make
More informationHow to Order BS B. Nil. Bracket (End bracket, Center bracket) Nil
Ionizer / with surface potential sensor Series IZS0 How to Order 00 0 00 00 Ionizer IZ S 0 0 Bar length Bar length 00 mm 0 mm mm 00 mm 00 mm Ionizer Made to Order Bar type Size Electrode needle material
More informationCommercial Shearing (Pty) Ltd THE WORLDWIDE PROGRAM OF VALVES ISO 9001
Commercial Shearing (Pty) Ltd THE WORLDWIDE PROGRAM OF VALVES ISO 9001 An Insight into Valve Technology CLEAN ROOM ASSEMBLY AND TEST A major investment has been made in a clean-room assembly and test environment.
More informationDirectional control valve HV07 Constant flow and constant pressure valve. Catalogue (GB) Catalogue (US) October 1998
Directional control valve Constant flow and constant pressure valve Catalogue 9129 8539-02 (GB) Catalogue 9129 8539-06 (US) October 1998 Catalogue layout This catalogue has been designed to give an overview
More informationPart Number Spool Qty Max Flow Max Pressure Ports. 80 lpm
Monoblock Valves M5 Monoblock, 80 lpm, Max 315 ar art Number Spool Qty Max Flow Max ressure orts M5/1S3/18L/G4-6 ylinder 1 M5/2S3/18L/G4-6 ylinder 2 M5/3S3/18L/G4-6 ylinder 3 M5/4S3/18L/G4-6 ylinder 4
More informationTRANSMISSION SERVICING - A/T
TRANSMISSION SERVICING - A/T 1992 Infiniti G20 1991-92 TRANSMISSION SERVICING Automatic Transmission G20 IDENTIFICATION INFINITI AUTOMATIC TRANSMISSION APPLICATIONS Model Transmission Model G20... (1)
More informationPEFC/ Compact Excavators
2 PEFC/07-1-77 Compact Excavators Superior design for superior performance The Bobcat 7-ton excavator Powerful The 7-ton Bobcat 2 excavator offers state-of-the-art design and technology, making it an excavator
More informationMB-4 Chapters Monoblock Directional Control Valves
M-4 hapters Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34 M-4 2 2
More informationHydraulic pilot control units for armrest installation
Hydraulic pilot control units for armrest installation RE 64 555/04.06 /2 Replaces: 05.05 Type 4TH5, 4TH6, 4TH6N Series Contents Functional description, section, symbol 2 Technical data 3 Ordering details
More informationTOYOTA L/C TRANSFER CASE TWIN STICK
KIT CONSITS OF: No: Qty Part No. Description PAGE 1 OF 5 Page Rev. Date: 10-16-18 1. 1 *715575 HIGH LOW PIVOT BLOCK 2. 1 715576 T/C HIGH LOW SHIFTER LEVER 3. 1 *715577 2WD/4WD PIVOT BLOCK 4. 1 715579 PIVOT
More informationV050 SERIES DIRECTIONAL CONTROL VALVE
V5 SERIES DIRECTIONAL CONTROL VALVE TAKE CONTROL Take control with Muncie Power Products V5 directional control valve. The V5 is constructed with high-grade iron castings and nickel-plated spools for use
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationMANUALLY AND MECHANICALLY OPERATED VALVES Product Index
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index Function pipe connections type of operator technology ports/positions * - instant fittings O.D. (mm) w - internal thread ØG * ØG NC NO /8 / /8 Manually
More information