directional lever control valves
|
|
- Angelica Gaines
- 5 years ago
- Views:
Transcription
1 directional lever control valves directional lever control valves Directional Lever Control Valves Directional Control Valves - Monoblock Directional Control Valves - Sectional Directional Control Valves with Pneumatic Pilots - Monoblock Sec:2 Sec:4 Sec:6 Sec:1
2 Directional Control Valves - Monoblock DCV 20 directional control valve Monoblock construction Flow 35 litres/min Maximum pressure 400 bar Threads: 3/8 SP Spool stroke ±5m/m marine protected, viton seals, special springs, etc. ackpressure in outlet sections 60 bar Temperature range -20ºC +80ºC Dimensions + DCV 20/ DCV 20 DT Detent kit DCV 20/ DCV 20 MRV Main Relief Valve DCV 20/ DCV 20/ DCV 20/ DCV 20/ DCV 40 directional control valve Monoblock construction Flow 60 litres/min Maximum pressure 400 bar Threads: 1/2 SP Spool stroke ±5m/m marine protected, viton seals, special springs, etc. ackpressure in outlet sections 60 bar Dimensions + DCV 40/ DCV 40 DT Detent kit DCV 40/ DCV 40 MRV Main Relief Valve DCV 40/ DCV 40/ DCV 40/ DCV 40/ Sec:2
3 Directional Control Valves - Monoblock DCV 110 directional control valve Technical Data Rate Flow: 110 L/min Maximum flow: 125 L/min Rated Pressure: 250 bar Maximum Pressure: 315 bar Port: 3/4" SP Dimensions + DCV 110/ DCV 110/ DCV 110/ Directional Lever Control Valves DCV 110 DT DCV 110 PP DCV 110 MRV Detent kit Power eyond Plug Main Relief Valve Sec:3
4 Directional Control Valves - Sectional DCV 60 directional control valve Modular valve Flow 60 litres/min Maximum pressure 350 bar Threads: 1/2 SP Spool stroke ±5m/m marine protected, viton seals, special springs, etc. Tie-rod tightening torque N.m. 55±5 ack pressure in outlet sections 60 bar Dimensions + Type of valve DCV 60/ DCV 60 DT Detent kit DCV 60/ DCV 60 PR Port relief DCV 60/ DCV 60 MRV Main Relief Valve DCV 60/ DCV 60/ DCV 60/ DCV 60/ DCV 60/ DCV 60 directional control valve Dimensions + DCV 60/ DCV 60/ DCV 60/ DCV 60/ DCV 60/ DCV 60/ DCV 60/ DCV 60/ Sec:4
5 Directional Control Valves - Sectional DCV 100 directional control valve Modular valve Flow 100 litres/min Maximum pressure 350 bar Threads: 3/4 SP Variable dimensions Type of valve Spool stroke ± 7m/m marine protected, viton seals, special springs, etc. Tie-rod tightening torque N.m 55±5 Filtering 30 p.m ack pressure in outlet sections 60 bar Don t use plugs or pipes with taper thread DCV 100/ DCV 100 DT Detent kit DCV 100/ DCV 100 PR Port relief DCV 100/ DCV 100 MRV Main Relief Value DCV 100/ DCV 100/ DCV 100/ DCV 100/ DCV 100/ DCV 200 directional control valve Directional Lever Control Valves Modular construction Flow 200 litres/min Maximum pressure 350 bar Threads: 1 SP Spool stroke ±8m/m marine protected, viton seals, special springs, etc. Tie-rod tightening torque N.m. 70±5 ack pressure in outlet sections 80 bar Variable dimensions DCV 200/ DCV 200 DT Detent kit DCV 200/ DCV 200 PR Port relief DCV 200/ DCV 200 MRV Main Relief Valve DCV 200/ DCV 200/ DCV 200/ DCV 200/ DCV 200/ Sec:5
6 Directional Control Valves with Pneumatic Pilots directional control valves with pneumatic pilots Flow 60 litres/min Threads: working ports 1/2 SP Tank ports 3/8 SP and 3/4 SP Pneumatic pilot ports 1/8 SP Part number DCV-PNP 401S1 DCV-PNP 402S1 DCV 40PN single - normally closed 1/2 SP double - normally closed 1/2 SP pneumatic pilot kit pneumatic control valve Part number PHC - V4H2 3006S-SPOC PHC - V4H2 3006D-SPOC 5/3 way spring return 1/8 SP N/O 5/3 way detent 1/8 SP N/O Sec:6
Contents. Directional Control Valve 2 Series CV Unibody. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves
Contents Page 3-4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11-12 Page 13 Page 14 Page 15 General Information Technical data Performance Curves Dimensions - Basic Valve Dimensions - Unibody Secondary
More informationAuxiliary valves. Lever. Spool positioner Check valve Spool
Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK VALVE INDEX MONOBLOCK DIRECTIONAL CONTROL VALVES For mobile and industrial hydraulic applications. MA6 (6 GPM) General Specifications 4 Dimensions 5 Performance Chart 6 Ordering Code 7 MAV12
More informationORV-M45. Contents. Additional Informations
Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners
More informationPressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
More informationContents. Directional Control Valve 2 Series CV 300
Contents Page 3 General Information Page 4 Technical data Page 5 Dimensions Page 6 Secondary Valves Page 7 Cylinder port mounted secondary valves Page8 Spool - Control characteristics Page 9-10 Spool Controls
More informationHV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control
INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:
More informationSECTION A OIL PILOT CONTROLS
NB: models, Codes and Specifications may be subject to change without notice. SECTION A OIL PILOT CONTROLS SVM400 ** NEW ** SV10 SV20 SV30 SVP500 SV40 SV50/51 SV60 SV70 Valve Series PAGE HYDRAULIC PILOT
More informationSpreader Valves SPR-2FFL12, SPR-2FFLC12 & SPR-2FFLW86
Spreader Valves, & SCHEMATIC MODEL PRESSURE FLOW* WEIGHT Quick Reference Page 3 Spreader Valve, Dual Flow Regulation, Compensated, Manual Dump, Gear Pump Circuit 138 bar [2000 psi] [30 US g/m] 2.62 kg
More informationRA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)
R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve
More informationContents. Directional Control Valve 3 Series CV 452. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves.
Contents Page 3-4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 General Information Technical data Performance Curves Dimensions - Basics Valve Dimensions - LS Valve Secondary
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More informationMP18/SIC & SIO Stacking Valve System Technical Information Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18/SIC & SIO Stacking Valve System Technical Information Manual The Drive & Control Company Copyright
More informationIntroduction. Pressure drops
Directional control valves CETOP 5/NG0 Introduction The ARON directional control valves NG0 designed for subplate mounting with an interface in accordance with UNI ISO 440-05 - 04-0 - 94 standard (ex CETOP
More informationDirectional Control Valve CV550
www.nimco-controls.com Directional Control Valve CV550 Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page
More information5/2-way valve, Series ST Qn= 280 l/min pipe connection compressed air connection output: G 1/8 with spring return
00108065 Version Spool valve not lockable Sealing principle metal/metal sealing Working pressure min./max. -0.95 bar / 10 bar Ambient temperature min./max. -15 C / +80 C Medium temperature min./max. -15
More informationDIRECTIONAL CONTROL VALVES CETOP 3/NG6
CETOP 3/NG06 STANDARD SPOOLS CH. I PAGE 0 AD.3.E... CH. I PAGE AD.3.E...J* CH. I PAGE 2 AD3.XS... CH. I PAGE 3 AD3.XD... CH. I PAGE 4 AD.3.V... CH. I PAGE 5 AD.3.L... CH. I PAGE 6 OTHER OPERATOR CH. I
More information-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14
Auxiliary valves Document: SCV-1-June 2013 Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 2/14 -Circuit mode... 2/14 -Dimensions... 3/14 -Dimensions... 4/14 -Lever mechanism...
More informationSpecial valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves
Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components
More informationGeneral Valve Assembly Information
General Assembly Information Open-Center Directional Control Valves General Valve Assembly Information The Basics Every valve has the following elements: Inlet Main relief Work sections Outlet Section
More informationPRODUCT INFORMATION FAQ s
PRODUCT INFORMATION FAQ s Directional Control Valves General....... Page 2 Directional Control Valves Electric....... Page 4 Directional Control Valves Options....... Page 6 Directional Control Valves
More informationCartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
More informationCLS180 Proportional Load Sensing Mobile Valve
Mobile valves Proportional Load Sensing, Model CLS180 350 bar 180 L/min Up to 10 sections Eaton Pro-FX TM Ready CLS180 Proportional Load Sensing Mobile Valve Overhaul manual / Trouble shooting guide Contents
More informationV250 SERIES DIRECTIONAL CONTROL VALVES
V SERIES DIRECTIONAL CONTROL VALVES TAKE CONTROL OF YOUR HYDRAULICS Take control with Muncie Power Products V directional control valve. The V is constructed with high-grade iron castings and nickel-plated
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
More informationManual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Hydraulic circuit (Example) AB AB AB X Z P Features hese stacking type multiple control valves are equipped
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More information(F*) - DG5V -10- * - (R) - (B) - **(L) - (**) - (X) - (*) - (E) - (T) - (*) - (V)M - (S*) - * ** * * (L) - (*) ** - (***) (EN***)
Service Data Vickers Directional Valves Pilot Operated Directional Valves (F*) - DG5V -10- * - (R) - (B) - **(L) - (**) - (X) - (*) - (E) - (T) - (*) - (V)M - (S*) - * ** * * (L) - (*) ** - (***) - 10
More informationHYDRAULIC PILOT CONTROL UNIT OF SANDWICH PLATE DESIGN
01 /10 2.2 HYDRULIC PILOT CONTROL UNIT OF SNDWICH PLTE DESIGN Type: H*-2TH6 Benefits: Progressive, sensitive control Precise and play-free control characteristics Low actuation force at the lever Rust-free
More informationDIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 GENERAL DESCRIPTION RH0...1-...F... Document: DCVC3-1-Aug 2013 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction RH0...1-...F...
More information6 to14/2 ways/positions bankable flow diverters flangeable
6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/07.12 Replaces: 12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F) Size 10 Series 00 Maximum operating pressure 310 bar [4500
More informationDEL HYDRAULICS AIR CONTROL CATALOG
DEL HYDRAULICS AIR CONTROL CATALOG www.del.us.com 2 Dump Truck Valves AIR CONTROL VALVES DAV 1201: On-Off Air Valve DAV 1202: Dump Pump Air Valve DAV 1203: Dump Pump Valve with Automatic PTO Disengagement
More informationV050 SERIES DIRECTIONAL CONTROL VALVE
V5 SERIES DIRECTIONAL CONTROL VALVE TAKE CONTROL Take control with Muncie Power Products V5 directional control valve. The V5 is constructed with high-grade iron castings and nickel-plated spools for use
More informationMonoblock Directional Control Valve RM 230
Monoblock Directional Control Valve RM 230 Key valve features RM 230 light is a monoblock valve, designed for max. operating pressures up to 3,000 psi (210 bar) and typ. pump flows up to 20 gpm (70 Lpm).
More informationDIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 CONTENTS: RH06...1 - electrical control... RH06...2 - hydraulic control... Page 1/17...7/17 8/17...9/17 RH06...4 - mechanical control RH06...6 - pneumatic control......
More informationHYDRAULICS VINCKE DIRECTIONAL CONTROL VALVES
VINCKE DIRECTIONAL CONTROL VALVES TECH-DCV200.1 index 3 link to your page / link a su página Monoblock hydraulic distributors Monoblock hydraulic distributors 35 liters 3 P35 Monoblock hydraulic directional
More information3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
More informationCABLE TIPPING VALVE. Tipping valve type Order code IN TANK OUT Weight HYDRAULICS VALVES 2.2 FM-45 CE G 1/2 G 1/2 G 1/2.
CABLE TIPPING VALVE Optional Mechanical tipping valve operated by cable controls series LINEA or LINEA BLOCK to suit light duty tipper trucks. Open centre hydraulic scheme according to CE standards. -
More information3/8 & 1/2 NPT. 4-Way - 5 Ported - 2 Position - Type 2 Use on all 4 Way - 2 Position applications
8 SERIES: /8 Ported Air Valves, A & B SERIES: / Ported Air Valves /8 & /, A, B & 8 Series, & Way; & Position Operation to 50 psi Note! Spring return & spring centered models NOT suitable for dry air service.
More informationSeated valve 500 Type WVM-4B NG 4 up to 12 l/min
Seated valve 500 Type WVM-4B Features Direct operated Leakage free Good resistance to corrosion As 2/2-, 3/2-, 3/3-, 4/2-* or 4/3-valve with solenoid or alternative actuation * pilot-operated Design With
More informationPilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationVAD03M-VPD03M- VMD03M
CONTINENTAL HYDRAULICS VAD03M-VPD03M- VMD03M AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM PRECISE VAD03M-VPD03M-VMD03M
More informationSECTION A FRONT END LOADER VALVES
NB: models, Codes and Specifications may be subject to change without notice. SECTION A FRONT END LOADER VALVES Valve Series Nominal PAGE WALVOIL FRONT-END LOADER VALVES SDM102 Series... 45L/Min... A 14
More informationCONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VAD05M-VMD05M AIR & LEVER OPERTAED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD05M-VMD05M AIR & LEVER OPERATED
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent P Pushbuttons return
More informationCLS100 Proportional Load Sensing Mobile Valve
Mobile Valves Proportional - Load Sensing Model CLS100 350 bar 100 L/min Up to 10 sections Eaton Pro-FX TM Compliant CLS100 Proportional Load Sensing Mobile Valve Overhaul manual / Trouble shooting guide
More informationPost-Compensated Proportional Valve CV2000LS
www.nimco-controls.com Post-Compensated Proportional Valve CV2000LS Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16
More informationmechanical control valve
DF Working conditions This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm /s -- 46 cst viscosity at 4 C temperature. DF5 DF DF DF5 N. of available ways --3--6
More informationNV452 Monoblock directional control valve
NV452 Monoblock directional control valve Product Features General Specifications Order Coding Open Center Load Sense Performance Data Inlet Options Spool Positioners Spool Options Auxilary Valves Lever
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.
More informationMonoblock Directional Control Valve PMB22TSTSAB PMB23TSTSTSLB PMB21TDLB
Engineering & Manufacturing Solutions Specifications: FLOW RATINGS: - MB21 & MB22 10 gpm (38 lpm) - MB23 8 gpm (30 lpm) Rated up to 4000 psi (275 bar). Port Sizes: - Inlet/Outlet #8 SAE. -Work Ports #8
More informationMP18 Stacking Valve System Technical Information Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18 Stacking Valve System Technical Information Manual The Drive & Control Company Copyright 1996 Bosch
More informationNB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES
NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES Valve Series Page...... A 2 WALVOIL FRONT-END LOADER VALVES...
More informationLOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS
Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating
More informationProportional Pressure Reducing Valve, Size 16 Series DRPSB 5B...
Proportional Pressure Reducing Valve, Size 16 Series DRPSB B... l/min, bar External pilot drain to port 3 Surface protection: Cartridge is chromited, Cr VI free Very stable operation Coil can be changed
More informationDirectional Valves. Pilot Operated Directional Valves. Vickers. Service Data
Service Data Vickers Directional Valves Pilot Operated Directional Valves Eaton Hydraulics, Incorporated 14615 Lone Oak Road Eden Prairie, Minnesota 55344-2287 U.S.A. 5007.04/EN/0799/S DG5V - 8 - S/H -
More informationPage 3 Page 4 Page 6 Page 8 Page 9 Page 10 Page 11
Contents Page 3 Page 4 Page 6 Page 8 Page 9 Page 10 Page 11 General Information Compact Loader Valves Medium Size Loader Valves Large Size Loader Valves 3rd, 4th and 5th Function Valves Cable Joystick
More information555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)
555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements
More informationTransmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
More informationDFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...
DFE Content Working conditions... 54 Hydraulic circuit... 55 DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes... 64 Positioner kits... 67 Solenoid parts... 68 Dimensional data... 69 Ordering codes...
More informationHydraulics CONTROL VALVES
Hydraulics CONTROL VALVES PRODUCT INDEX Series Page Series Page Series Page 90 Rotating Couplings 12 In Line Double-acting flow control 17 and shut-off control needle valves Directional Control Valves
More informationHyva Valves Introduction
Introduction Hyva tipping valves Hyva offers a complete range of tipping valves to be used for different cylinder volumes. The T 0 & 00 valve can be used for flows up to 0 litre per minute. The pressure
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationSECTIONAL DIRECTIONAL VALVE HDS 20 SERIES. CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.84
CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.84 Material specification: Standard features: Optional features available: Symbols: P T A/B H.P.C.O. RV P 1 T 1 Weight CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE
More informationThe product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.
Wheel gears... 3 Axial piston pumps... 3 Axial piston motors... 3 Winches... 4 Radial piston pumps... 4 Radial piston motors... 4 Slewing rings... 5 Gear pumps... 5 Gear flow dividers... 5 Cylinders...
More informationVickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi)
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi) Revised 2/93 GB C 2037 Table of Contents Model Code...................................................................................................
More informationMANUALLY AND MECHANICALLY OPERATED VALVES Product Index
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index Function pipe connections type of operator technology ports/positions * - instant fittings O.D. (mm) w - internal thread ØG * ØG NC NO /8 / /8 Manually
More informationVPN2-10/MR. Functional Description HU /2008. Pilot Operated Pressure Relief Valves. Replaces HU /2005
Pilot Operated Pressure Relief Valves VPN2-10/MR Size 3/8 (10)...5076 PSI (350 bar)...40 GPM (150 L/min) 7/2008 Replaces 2/2005 Modular and in-line design Five pressure ranges Two pressure adjustment options:
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F)
More informationExperiments on Hydraulic and Pneumatic circuit trainers HYDRAULIC CIRCUITS:
Experiments on Hydraulic and Pneumatic circuit trainers HYDRAULIC CIRCUITS: Hydraulic circuits are used in high power and high load applications such as earth moving equipment. The pressure used in industrial
More informationP.T.O. INSTALLATION 1 2 For manual shift transmissions, drain transmission fluid. For automatic transmissions, do NOT drain transmission fluid. Remove
P.T.O. INSTALLATION 1 2 For manual shift transmissions, drain transmission fluid. For automatic transmissions, do NOT drain transmission fluid. Remove cover plate. 3 Place a clean rag in the opening to
More informationModular valves DO5 (NG 10) 315 bar
Modular valves DO5 (N ) 315 bar 2 Modular valves DO5 (N ) 315 bar OSCH OSCH Modular valves DO5 (N ) 315 bar 3 roduct Range ressure relief valves age ressure reducing valves age 4 4 4 Check valves 4 16
More informationC 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
More information1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
More informationILG-D Series Cast Iron Housing Declutchable Gear Operators
ILG-D Series Gear Operators The Rotork Gears ILG-D gear operators are designed to provide a means of manually overriding pneumatic valve actuators in power and process applications. These gear operators
More informationPorts. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:
Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,
More informationSolenoid directional valves type DPHI, DPHU
www.atos.com Table E0805/E Solenoid directional valves type, two stage, ISO 4401 size 10, 16, 25 and 32 37**/HM..... and are spool type, two or three position directional two stage solenoid valves designed
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-09/12.09 1/10 L732... (VS241F-VS245F-VS246F-VS247F)
More informationCartridge Valves Technical Information. Spreader Valves. Spreader Valves SCHEMATIC MODEL PRESSURE FLOW* WEIGHT SPR-2FFL12 SPR-2FFLC12 SPR-2FFLW86
SPR-2FFL12, SPR-2FFLC12 & SPR-2FFLW86 SCHEMATIC MODEL PRESSURE FLOW* WEIGHT Page 2 SPR-2FFL12 138 bar [2000 psi] [30 US g/m] 2.62 kg [5.90 lb] Spreader Valve, Dual Flow Regulation, Compensated, Manual
More informationV 5 KEC. Covers for logic element 2/2 ** 16 = NG16 25 = NG25
Covers ordering code KEC Covers for logic element 2/2 ** 16 = NG16 2 = NG2 ** Type of cover (see Tab. 3) RI = Directional with external piloting CQ = Directional with stroke adjustment RC = Directional
More informationPort Flow Rate/ Function Series Actuators Page Number Size Factor
Section dex Port Flow Rate/ Function Series Actuators Page Number Size Factor 0- Cv = 0.05 Way Modular Solenoid. -. & to Way Manifold /8 NPT Cv = 0. Way, Position Modular /8 NPT Cv = 0.05 Way Hex Solenoid.5.6
More informationSectional Directional Control Valve RSQ 240
Sectional Directional Control Valve RSQ 0 Key valve features RSQ 0 is a sectional open center valve, designed for max. operating pressures up to 50 bar and max. pump flows up to 00 l/min. It is available
More informationSeated valve 500 Type WVM-4B NG 4 up to 12 l/min
Seated valve 500 Type WVM-4B Features Direct operated Leakage free Good resistance to corrosion As 2/2-, 3/2-, 3/3-, 4/2-* or 4/3-valve with solenoid or alternative actuation * pilot-operated Design With
More informationVPN1-06. Functional Description HA /2008. Pilot Operated Pressure Relief Valves. Replaces HA /2002
Pilot Operated Pressure Relief Valves VPN-06 HA 56 4/2008 Size 06 p max up to 320 bar Q max up to 70 L/min Replaces HA 56 3/2002 Cartridge, modular and in-line design Five pressure ranges Two pressure
More informationAdams. Progressive. Description. Typical system layout using Pneumatic Pump for grease - with monitoring. Typical system
45 P rogressive systems can be used for oil or grease lubrication when it is required to provide a positive displacement with visual or electrical monitoring. ll outlets can be checked by one indicator
More informationBR 30a. Pneumatic Multi-turn Actuator. Application: Special designs:
Pneumatic Multi-turn Actuator BR 30a Application: Single-acting pneumatic diaphragm multi-turn actuator for butterfl y valves and other rotary valves: The pneumatic BR 30a Multi-turn Actuators are diaphragm
More informationDirectional control valve / RM 270
Directional control valve / 31-02-RM270-05 Nordhydraulic AB P.O Box 189 (Industrivägen 15) SE-872 24 KRAMFORS Sweden Solutions that power your visions Telephone: Int. +46 612 71 72 00 Telefax: Int. +46
More informationSP 700 EC-TH / 730 EC-TH / 730 EC-EV
SP 700 ECTH / 730 ECTH / 730 ECEV SP V 700 ECTHVD (DC) SP V 700 ECTHVD (AC) SP V 730 ECTHVD (DC) SP V 730 ECTHVD (AC) SP V 730 ECEVVD (DC) SP V 730 ECEVVD (AC) Product Features optimized for vacuum applications
More informationVINCKE INDUSTRIAL HYDRAULIC VALVES INTRODUCTION
INTRODUCTION 4 Introduction Hydraulic valves, in addition to the force density advantage of actuators, are what help make hydraulics unique in their control of force, torque and motion. Valves govern direction,
More informationSectional Directional Control Valve RS 220
Sectional Directional Control Valve RS 0 RS 0 is a sectional open center valve designed for max. operating pressures up to 00 bar and max. pump flows up to 0 l/min. Technical data Pressure and flow values*
More informationSECTIONAL DIRECTIONAL VALVE HDS 30 SERIES. CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.106
CROSS HYDRAULICS PY LD YELLOW CAALOGUE Page 3.106 Material specification: Standard features: Optional features available: Symbols: P A/B H.P.C.O. RV P 1 1 Weight CROSS HYDRAULICS PY LD YELLOW CAALOGUE
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 6 Monobloc directional control valves Contents 6.1 General specifications 66 6.2 Dimensional data 67 6.3 Performances curves
More informationManual & Actuated Valves
GF Piping Systems Manual & Actuated Valves Technical Catalogue Issue 1 General Information The best choice Corrosion and chemical resistant products, systems and complete solutions from GF Piping Systems
More information1 of 38. Rexpower Sdn. Bhd. Gear pump with lift valves. Lift Valves. View more info :
Rexpower Sdn. Bhd. Gear pump with lift valves View more info : http://www.rexpower.com/products6-3.html Lift Valves View More Info : http://www.rexpower.com/products6-2.html 1 of 38 06 Series VPG. Double
More informationCheck Valves. VC Series - Cartridge Mounting 500 Bar. Innovative Fluid Power. Bulletin 86624
VC Series - Cartridge Mounting 500 ar Innovative Fluid Power ulletin 86624 Issue 1.0 02.2010 VCC 500 ar General Information Check Valve with Standard Top Cap Section View with Standard Poppet Maximum Working
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 855 / 0817 / E
HYDRULIC COMPONENTS HYDROSTTIC TRNSMISSIONS GERBOXES - CCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODEN (ITLY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730
More informationVALVES POWER TRANSMISSION T E C H N I C A L C A T A L O G
VLVES POWER TRNSMISSION T E C H N I C L C T L O G Power transmission POCLIN HYDRULICS Methodology : This document is intended for manufacturers of machines that incorporate Poclain Hydraulics products.
More information