3/8 & 1/2 NPT. 4-Way - 5 Ported - 2 Position - Type 2 Use on all 4 Way - 2 Position applications

Transcription

1 8 SERIES: /8 Ported Air Valves, A & B SERIES: / Ported Air Valves /8 & /, A, B & 8 Series, & Way; & Position Operation to 50 psi Note! Spring return & spring centered models NOT suitable for dry air service. Features Direct ported /8, / and / high fl ow: & Way - Position. Way - & Position. Aluminum bar stock body and operator blocks, black anodized. Light weight aluminum spool, hard anodized for long life. Operator blocks fi eld interchangeable. Buna N seals. Operating temperature (0 to + 80 F); solenoid controlled models +50 F max. See pages.5 &.6. All spool seals size checked to assure reliability. Single Subbase or multiple manifolds with /8 and / ports for Way - & Position see Pg.7. High fl ow factors, see Pg.7. Parts anodized for corrosion resistance. Aluminum end caps, anodized red, locate counterbores in body to control static squeeze on seals. Aluminum center cages, anodized gold, have lips to hold seals in place. Spool cushioned with Delrin -Urethane bumper combination that absorbs shock but does not bounce the spool. Simple construction for easy servicing. Spool Lands double tapered and polished to assure easy entry into seal. Prelubed with Magnalube -G grease. Catalog Options s for Piloted and Solenoid Valves External Pilot Supply for Solenoid Valve Option -X Explosion Proof Operators, Spade Coil Connections, and other Solenoid Coil choices - see Pg.9 -. High Flow (see Model Charts) Service Kits or Way - Seal Kit PV-90 Way - Seal Kit PV-90 Dual Inlet - Single Exhaust - Way: See note below Muffl ers for Solenoid Exhaust SM-0, See page. Other Operator Combinations Solenoid - Pilot Return Solenoid - Push-Pull Knob See Model Charts Custom Options 0- Pilot Ports 0- Auxiliary Pressure Outlets Viton Seals Stacking and Manifolding to Customer requirements Specials Fabco-Air, Inc. has the expertise and willingness to design and modify these valves to your necessary and specific job requirements. Please advise us of your needs. See pages ii & iii. 0 -Way or Way - Position - Type This Way Valve may be used for any Way, Way, Selector or Diverter service. When used with internally supplied Solenoid Operators, the Supply Pressure must be connected to Port #. For this same reason when a normally open Solenoid Valve is ordered the Solenoid Operator will be mounted on end 0 and the Spring on End. 5 -Way - 5 Ported - Position - Type Use on all Way - Position applications Spools Way - 5 Ported - Position - Type B Blocked Center position - All ports blocked and isolated. Use on conventional block and hold circuits. 5 -Way - 5 Ported - Position - Type F Float Center position - Inlet blocked and Cylinders open to exhaust. Used to vent both ends of cylinder to allow cylinder to fl oat with a manual or machine movement. Flow controls or exhaust speed controls should not be used. Note: Any of these Way Valves, except the internally supplied Solenoid Valves, (See Option -X) can be used as Dual Inlet, Single Exhaust. Using this concept, with different pressures for force application and retraction, can effect large savings of high pressure air and its cost. The larger the cylinder or the faster the cycle, the higher the savings.

2 /8 & /, A, B & 8 Series PILOT OPERATED Specify Model Number from chart. Specify Options. (See page.7 &.8 for Dimensional Information.) OPERATING RANGE: Inlet Presure psi Pilot Pressure: Models without Spring psi Position Standard Service Spring psi Position Light Service Spring (Option -L) psi Position, Spring Centered psi Optional s LOCKING LOCKS IN - Does not lock OUT Does not lock IN - LOCKS OUT NON-LOCKING Model Suffi x -MO -MO -MO -MO / /8 / High Flow SUBBASE OR MANIFOLD MOUNTED See pg.7 and Specify Position Single Pilot Way - Way 8-SP -SP B-SP NA Spring Return Way 8-SP -SP B-SP A-SP Double Pilot Way - Way 8-DP -DP B-DP N Way 8-DP -DP B-DP A-DP Position Double Pilot Way 8-DPB -DPB NA A-DPB Double Pilot Way 8-DPF -DPF NA A-DPF HAND LEVER OPERATED Specify Model Number from chart. Specify Options. (See page.7 &.8 for Dimensional Information.) OPERATING RANGE: psi / /8 / High Flow SUBBASE OR MANIFOLD MOUNTED See pg.7 and Specify Position Spring Return Way - Way 8-HLS -HLS B-HLS NA Way 8-HLS -HLS B-HLS A-HLS Detented Way - Way 8-HL -HL B-HL N Way 8-HL -HL B-HL A-HL Position Spring Centered Way 8-HLSB -HLSB NA A-HLSB Spring Centered Way 8-HLSF -HLSF NA A-HLSF Detented Way 8-HLB -HLB NA A-HLB Detented Way 8-HLF -HLF NA A-HLF PUSH-PULL KNOB OPERATED Specify Model Number from chart. Specify Options. (See page.7 &.8 for Dimensional Information.) OPERATING RANGE: psi Standard knob color is black. For red knob add suffi x -R to Model Number / /8 / High Flow Position Push - Pull Way - Way 8-PO -PO B-PO NA (Natural Detent) Way 8-PO -PO B-PO A-PO Push Way - Way 8-PS -PS B-PS NA Spring Return Way 8-PS -PS B-PS A-PS Push Way - Way 8-PA -PA B-PA NA Pilot Return Way 8-PA -PA B-PA A-PA Push - Push Way - Way 8-PP -PP B-PP NA Knob Both Ends Way 8-PP -PP B-PP A-PP Position Push - Pull Spring Centered Way 8-PB -PB NA A-PB Push - Push Spring Centered Way 8-PPB -PPB NA A-PPB Knob Both ends Push - Pull Spring Centered Way 8-PF -PF NA A-PF Push - Push Spring Centered Way 8-PPF -PPF NA A-PPF Knob Both ends SUBBASE OR MANIFOLD MOUNTED See pg.7 and Specify.

3 /8 & /, A, B & 8 Series /8 & / Ported, 5 STYLE Solenoid Controlled, Pilot Operated Air Valves Way, Way - Position Way or Position Operation to 50 PSI Air See pages.7 &.8 for dimensional information. Operating Temperature: 0 F ( 8 C) to +0 F (0 C) ambient. 0 F ( 8 C) to +50 F (65 C) media. Operating Ranges, psi Internal Pilot Supply (Standard) Inlet Pressure No Spring to 50 Spring: Position to 50 Position Light Service Spring, Option -L to 50 Position to 50 External Pilot Supply, Option -X: Inlet Pressure to 50 Pilot Pressure, Same as Internal Pilot Supply above. Specify Model Number from Chart Optional s Model Suffix Specify Options LOCKING -MO Specify Volts / Hertz LOCKS IN - Does not lock OUT -MO See pages.9 &.0 for Solenoid Operator, Does not lock IN - LOCKS OUT -MO Coil and Housing information. NON-LOCKING -MO Conduit Housing C /8 / / High Flow Sub-base/Manifold, See Pg..7 Position Single Solenoid / Way, NC 8 CS CS B CS NA Spring Return / Way, NO 80 CS 0 CS 0B CS NA Way 8 CS CS B CS A CS Single Solenoid / Way 8 CA CA B CA NA Pilot Return Way 8 CA CA B CA A CA Single Solenoid / Way 8 CP CP B CP NA Knob Return Way 8 CP CP B CP A CP Double Solenoid / Way 8 CC CC B CC NA Way 8 CC CC B CC A CC Position Solenoid Pilot, B Spool Way 8 CAB CAB NA A CAB Solenoid Pilot, F Spool Way 8 CAF CAF NA A CAF Double Solenoid B Spool Way 8 CCB CCB NA A CCB Double Solenoid F Spool Way 8 CCF CCF NA A CCF Grommet Housing G /8 / / High Flow Sub-base/Manifold, See Pg..7 Position Single Solenoid / Way, NC 8 GS GS B GS NA Spring Return / Way, NO 80 GS 0 GS 0B GS NA Way 8 GS GS B GS A GS Single Solenoid / Way 8 GA GA B GA NA Pilot Return Way 8 GA GA B GA A GA Single Solenoid / Way 8 GP GP B GP NA Knob Return Way 8 GP GP B GP A GP Double Solenoid / Way 8 GG GG B GG NA Way 8 GG GG B GG A GG Position Solenoid Pilot, B Spool Way 8 GAB GAB NA A GAB Solenoid Pilot, F Spool Way 8 GAF GAF NA A GAF Double Solenoid B Spool Way 8 GGB GGB NA A GGB Double Solenoid F Spool Way 8 GGF GGF NA A GGF Male Mini-DIN Housing F /8 / / High Flow Sub-base/Manifold, See Pg..7 Single Solenoid / Way, NC 8 FS Position FS B FS NA Spring Return / Way, NO 80 FS 0 FS 0B FS NA Way 8 FS FS B FS A FS Single Solenoid / Way 8 FA FA B FA NA Pilot Return Way 8 FA FA B FA A FA Single Solenoid / Way 8 FP FP B FP NA Knob Return Way 8 FP FP B FP A FP Double Solenoid / Way 8 FF FF B FF NA Way 8 FF FF B FF A FF Position Solenoid Pilot, B Spool Way 8 FAB FAB NA A FAB Solenoid Pilot, F Spool Way 8 FAF FAF NA A FAF Double Solenoid B Spool Way 8 FFB FFB NA A FFB Double Solenoid F Spool Way 8 FFF FFF NA A FFF

4 /8 & /, A, B & 8 Series /8 & / Ported, 58 STYLE Solenoid Controlled, Pilot Operated Air Valves Way, Way - Position Way or Position Spring Return and Spring Centered Models NOT suitable for dry air service See pages.7 &.8 for other dimensional information,. for solenoid information. Operating Temperature: 0 F ( 8 C) to + F (50 C) ambient. 0 F ( 8 C) to + F (50 C) media. Operating Ranges, psi # Solenoid # Solenoid 0.9 Watts.5 Watts Internal Pilot Supply (Standard) Inlet Pressure No Spring: to to 5 Spring: Position to to 5 Position Light Service Spring, Option -L to to 5 Position to to 5 External Pilot Supply, Option -X: Inlet Pressure to to 50 Pilot Pressure, Same as Internal Pilot Supply above. 58 STYLE Solenoid Valve, Model Number Code F S /60 Actuator F = Micro DIN G = Wire leads See page. Actuator F = Micro DIN, Pos.* FB = Micro DIN Position Type B* FF = Micro DIN Position Type F* G = Wire leads, Pos.* GB = Wire leads Position Type B* GF = Wire leads Position Type F* S = Spring** A = Pilot** P = Knob (Black)** PR = Knob (Red)** * See page.,.. ** See pages. &.8 for details. Series: 8 = /8, Way 8 = /8, Way NC 80 = /8, Way NO = /, Way = /, Way NC 0 = /, Way NO A = Way, Subbase Mount B = /, Way, Position High Flow B = /, Way NC, High Flow 0B = /, Way NO, High Flow Solenoid Attitude 5 = Inline with Solenoid Watts = 0.9 Watts =.5 Watts Solenoid 0 = None = Position # = Position # = Position # = Position # Solenoid Attitude 0 = Other than Solenoid 5 = Inline with Solenoid 0 = None = Position # = Position # = Position # = Position # Volts / Hertz # Solenoid (0.9 Watts) VDC, VDC # Solenoid (.5 Watts) /60 VAC 0/60 VAC VDC VDC Options -X = External Pilot -XV = External Pilot & Viton Seals -L = Light Spring Viton Seals are available in the main valve only for media compatability and therefore only in conjunction with External Pilot [0 F ( 8 C) to + F (50 C)]. Example: FS-500-0/60 /, Way Actuator Solenoid with Micro DIN coil; Actuator, Spring Return.5 Watt; Solenoid Inline Attitude with on Solenoid in Position #; Actuator is not a Solenoid; no on Actuator No Options 0 Volt/60 Hertz. External Pilot Supply Option -X. / Actuator End or Way Valve Actuator End Inline Solenoid Attitude #5 (Solenoid centerline inline with Valve centerline) Solenoid Position Section A A See page. for Operator Details See page.7 for Details A Side View Solenoid Position Section A A A Spring Return Shown.6

5 /8 & /, A, B & 8 Series BASIC BODIES Dia. Mounting Hole, Places WAY (Plug Way) WAY Spring Return Assembly Standard this End.7 Dia. Mounting Hole, Places WAY Spring Return 5 Assembly Standard this End.5 SINGLE SUBBASES 5.00 To Order Specify Valve Model No. (See pages. -.6) Specify Subbase Part No. listed below. EXAMPLE - Photo shows A-SP-MO with PV-50 SIDE PORTED /8 Ports Specify 8 PV-50 / Ports Specify PV-50 -Way -Way Position - Type Spool -Way Position - Type Spool Way Position Cv FLOW FACTORS Type F Spool NOTE: Any of these -way valves, except the internally supplied solenoid valves (see Option -X), can be used as dual inlet, single exhaust. Using this concept, with different pressures for force application and retraction, can effect large savings of high pressure air and its cost. The larger the cylinder or the faster the cycle, the higher the savings. MOUNT WAY VALVE WITH ANY OPERATOR /8 or / / High Flow NA Subbase Mounted Side or Bottom Ported /8 / NA NA..7.. Shifted to ; to. NA.. Shifted to ; to 5. NA..9 Centered to ; to 5.7 NA.6.8 BOTTOM PORTED /8 Ports Specify 8 PV-5 / Ports Specify PV-5 /8 or / IN & EXH Ports /8 or / CYL Ports /8 or / IN, CYL & EXH Ports MULTIPLE MANIFOLDS.00. Dia. Mounting Holes Places To Order Specify Station No. - Valve Model - Manifold Number EXAMPLE - Photo shows one unit consisting of valves and manifolds: Sta. No. A-CS-MO with PV-65 Sta. No. A-DP with PV-66 Sta. No. A-HL with 8 PV-65. Dia. Mounting Holes Places.88 MOUNT ANY COMBINATION OF WAY VALVE MODELS & PORT SIZES /8 or / CYL Ports on Bottom.5 / IN & EXH Ports.7 5 /-0 Tie Rods Dia. Mounting Holes - Each End.5..8 /-0 x.00.5 S.H.C. Valve.00 TYP..8 TYP. Mounting Screws.78 Station Station Station Station Etc. Valve & CYL Port C L Top View CYLINDER PORTS /8 / End Unit / IN & EXH 8 PV-65 PV-65 CENTER UNIT 8 PV-66 PV-66

6 /8 & /, A, B & 8 Series.5 AIR PILOT OPERATOR AIR PILOT OPERATOR with Pilot Port.50.8 / Pilot Port Max. /8 The 5 STYLE solenoid operator is a -way valve which, upon receiving an electrical signal, directs a pilot pressure to shift the main valve spool. Unless otherwise specifi ed, the operator is internally supplied from the main valve inlet with pressure for piloting. If an external pilot supply is required specify Suffix -X after the model number. This external pilot supply may be required; where the media through the main valve is of insufficient pressure for piloting, where the media through the main valve is something other than compressed air, for -way dual inlet-single exhaust, or other applications..88 Min. Position, Spring return Dimensions shown at the bottom of the page. Position Spring Centering is incorporated within the operator dimensions. s applicable to Pilot Operated or 5 Style Solenoid Operated Valves To Specify Add Suffix to Model Number LOCKING -MO LOCKS IN - Does not lock OUT -MO Does not lock IN - LOCKS OUT -MO NON-LOCKING -MO Note: The manual override stem physically contacts and moves the spool. 5 STYLE SOLENOID OPERATOR.50 See page.9 for Operator Details Housing Can Rotate STYLE SOLENOID OPERATOR with and External Pilot Supply, Opption -X Option -X /8 External Pilot Supply.8 See page.9 for Operator Details.88 Min..8 Max..85 Position, Spring return Dimensions shown at the bottom of the page. Position Spring Centering is incorporated within the operator dimensions. 58 STYLE Solenoid Operator See page.6.8 Dia. 5 5 HAND LEVER OPERATOR POSITION SPRING CENTERING OPERATOR FOR HAND LEVER ONLY Max Dia Stroke PALM BUTTON OPERATOR Position, Spring return Dimensions shown to right. Position Spring Centering is incorporated within the operator dimensions POSITION SPRING RETURN, STANDARD & LIGHT SERVICE All valve models Standard service spring consists of two concentric helical springs. Either may be removed for Light Service..8