YOULI HYDRAULIC INDUSTRIAL CO.,LTD.
|
|
- Archibald Ward
- 6 years ago
- Views:
Transcription
1 YOULI HYDRULI INDUSRIL O.,LD OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : FX : sales@tw-youli.com.tw OY RIGHS RESERVED / E/S ISO 900:2008 Q0089 YOULI HYDRULI INDUSRIL O.,LD.
2 M-4 hapters Monoblock Directional ontrol Valves Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34
3 For Mobile nd Industrial Hydraulic pplications. MONOLOK DIREIONL ONROL VLVES M-2 / M-3 / M-4 / M-5 / MS-5 SEIONL DIREIONL ONROL VLVES SN-3 / SN-4 / SN-6 / SN-8 M-2 ONLY ONE SEION VILLE Nominal flow rate 45 l/min 2 US gpm Operating pressure (maximum) 250 bar 3600 psi ack pressure (maximum) on outlet port 25 bar 360 psi M-3 VILLE SEIONS FROM O 7 Nominal flow rate 45 l/min 2 US gpm Operating pressure (maximum) 35 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi M-4 VILLE SEIONS FROM O 6 Nominal flow rate 60 l/min 6 US gpm Operating pressure (maximum) 35 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi M-5 VILLE SEIONS FROM O 6 Nominal flow rate 80 l/min 2 US gpm Operating pressure (maximum) 35 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi 2
4 MS-5 VILLE SEIONS FROM O 6 With Independent load check valve in each section, and optional port relief. Nominal flow rate 80 l/min 2 US gpm Operating pressure (maximum) 35 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi SN-3 VILLE SEIONS FROM O 2 Nominal flow rate 50 l/min 3 US gpm Operating pressure (maximum) 35 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi SN-4 VILLE SEIONS FROM O 2 Nominal flow rate 80 l/min 2 US gpm Operating pressure (maximum) 35 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi SN-6 VILLE SEIONS FROM O 2 Nominal flow rate 40 l/min 37 US gpm Operating pressure (maximum) 35 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi SN-8 VILLE SEIONS FROM O 2 Nominal flow rate 240 l/min 63 US gpm Operating pressure (maximum) 35 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi 3
5 Innovative Designs rofessional Quality ustomer Satisfaction! VILLE SEIONS FROM O 6 M-4 Monoblock Directional ontrol Valves 4
6 M-4 Monoblock Directional ontrol Valves 2 2 M-4 Specifications Nominal flow rate 60 l/min 6 US gpm Operating pressure (maximum) 35 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi Fluid temperature range with NR(UN-N) seals from - 20 to 80 from - 4 to 76 F with FM(VION) seal from - 20 to 00 from - 4 to 22 F operating range from 5 to 75 mm 2 /s from 5 to 75 cst Viscosity min 2 mm 2 /s 2 cst max. 400 mm 2 /s 400 cst mbient temperature range from - 40 to 60 from - 40 to 40 F ll specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. 5
7 M-4 Monoblock Directional ontrol Valves M-4 / 2 - S - 3 / 8 L / G - 4 / M3 ody kits Inlet relief (optional) Spool options "" side spool positioners (optional) "" side (optional) : ody kits WIHOU SERVIE OR VLVES RERRNGEMEN YE DESRIION - S section 2 - S 2 sections 3 - S 3 sections 4 - S 4 sections 5 - S 5 sections 6 - S 6 sections 2: Inlet Relief (optional) YE ODE DESRIION GE MG-2 YLM42002 Range 40 to 80 bar / 580 to 50 psi, standard setting 80 bar / 50 psi. MG-3 YLM42003 Range 63 to 200 bar / 900 to 2900 psi, standard setting 20 bar / 750 psi. MG-4 YLM42004 Range 60 to 35 bar / 2300 to 4600 psi, standard setting 220 bar / 3200 psi. SV YLM4200 Relief valve blanking plug. 6
8 M-4 Monoblock Directional ontrol Valves 3: Spool options YE ODE DESRIION GE YLM4300 Double acting, 3 positions, with, closed in neutral position. 2 2 YLM43002 Double acting, 3 positions, with, open to ank in neutral position. 2 3 YLM43003 Single acting on closed in neutral position, 3 positions, plugged. 3 4 YLM43004 Single acting on closed in neutral position, 3 positions, plugged. 3 5 YLM43005 Double acting, 3 positions, with open to ank in neutral position. 4 6 YLM43006 Double acting, 3 positions, with open to ank in neutral position. 4 7 YLM43007 Single acting on open to ank in neutral position, 3 positions, plugged. 5 8 YLM43008 Single acting on open to ank in neutral position, 3 positions, plugged. 5 9 YLM43009 Double acting, 3 positions, with,,, closed in neutral position (losed center). 6 0 YLM4300 Double acting, 3 positions, with, open to ank and, closed in neutral position (losed center). 6 5DY YLM43052 Double acting, 4 position, floating circuit in 4th position with, open to ank by pulling the lever. 7 5YX YLM4305 Double acting, 4 positions, floating circuit in 4th position with, open to ank by pushing. 7 the lever (with check valve) 5Y YLM4305 Double acting, 4 positions, floating circuit in 4th position with, open to ank by pushing the lever. 8 Z4 YLM4304 Double acting, 4 positions, regenerative circuit in 4th position with open to, by. 8 pulling the lever (Rest in pos. ) Z42 YLM43042 Double acting, 4 positions, regenerative circuit in 4th position with open to, by. 9 pulling the lever (Rest in pos. 0) 4: Side Spool ositioners YE ODE DESRIION GE 6- YLM4406 Detent in pos. -0-2, without spring centered YLM positions, detent in pos. 0-2, without spring centered YLM positions, detent in pos. -0, without spring centered. 23 8D2 YLM44200 With spring return to neutral position and pin with M8 male thread for dual control. 23 8E3 YLM44300 ON/OFF Electro-neumatic actuator YLM44080 ON/OFF neumatic actuator. 24 8MG (NO) YLM4480 Microswitch kit operated in pos. (Normally Open). 27 8MG2 (NO) YLM44802 Microswitch kit operated in pos. 2 (Normally Open). 27 8MG3 (NO) YLM44803 Microswitch kit operated in pos. &2 (Normally Open). 27 MG (NO) YLM44804 Microswitch with NO terminal. 27 8MG (N) YLM4480 Microswitch kit operated in pos. (Normally losed). 27 8MG2 (N) YLM44802 Microswitch kit operated in pos. 2 (Normally losed). 27 8MG3 (N) YLM44803 Microswitch kit operated in pos. &2 (Normally losed). 27 MG (N) YLM44804 Microswitch with N terminal YLM44008 With spring return to neutral position YLM positions, with spring centered from pos YLM positions, with spring centered from pos YLM4409 Detent in pos., 2 with spring centered YLM44092 Detent in pos. 2 with spring centered YLM44093 Detent in pos. with spring centered. 28 7
9 M-4 Monoblock Directional ontrol Valves M-4 / 2 - S - 3 / 8 L ody kits Inlet relief (optional) Spool options "" side spool positioners (optional) "" side (optional) / G - 4 / M : Side Spool ositioners YE ODE DESRIION GE 8ED3+RV-KER3 YLM4420 S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ED3+RV-KE2R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ED3+RV-KE3R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ED3+RV-KE4R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ED3+RV-KE5R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ED3+RV-KE6R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (2/24 VD). 25 8ER3+KES0 YLM4440 S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+KE2S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+KE3S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+KE4S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+KE5S0 YLM S:ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 8ER3+KE6S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 26 5: Side (optional) YE ODE DESRIION GE L YLM45000 Standard lever box. 20 SL YLM4500 Without lever box, with dust-proof plate. 20 L YLM45002 Joystick lever for 2 section operation. 2 Q YLM45003 Flexible cable connection. 22 8
10 2 M-4 Dimensions Monoblock Directional ontrol Valves X Y x ø Standard threads orts Inlet and Outlet and S G/2 G/2 G/2 UN-UNF 3/4-6 UNF-2 (SE 8) 3/4-6 UNF-2 (SE 8) 3/4-6 UNF-2 (SE 8) MERI M8x.5 M8x.5 M8x.5 Standard dimensions G-3/8 : G3 G-/2 : G4 G-3/4 : G6 G- : G8 G- /4 : G0 SE 8: E8 SE 0: E0 SE 2: E2 SE 6: E6 SE 20: E20 YE X Y mm in mm in M4 /S M4 /2S M4 /3S M4 /4S M4 /5S M4 /6S
11 M-4 erformance curve chart Monoblock Directional ontrol Valves t o ressure drop 40 ( b a r ) sections 4 sections 2 sections M4-6S M4-4S M4-2S Flow 80 (l/min) to () 6 ( b a r ) M4-6S ressure drop (6) () M4-S Flow 80 (l/min) () to ressure drop 20 ( b a r ) () 6(6) M4-6S M4-S Flow 80 (l/min) 0
12 M-4 Inlet Relief (Optional) Monoblock Directional ontrol Valves ype MG Direct pressure relief valve: ype SV Relief valve blanking plug:
13 M-4 Spool Options Monoblock Directional ontrol Valves YE closed & & & close open closed YE 2 closed & closed open closed 2
14 M-4 Spool Options Monoblock Directional ontrol Valves YE 3 closed open "" port plugged & & close open "" port plugged & closed "" port plugged YE 4 & closed "" port plugged & & close open "" port plugged closed open "" port plugged 3
15 M-4 Spool Options Monoblock Directional ontrol Valves YE 5 closed & close open closed YE 6 closed & closed open closed 4
16 M-4 Spool Options Monoblock Directional ontrol Valves YE 7 closed open "" port plugged closed open "" port plugged & closed "" port plugged YE 8 & closed "" port plugged closed open "" port plugged closed open "" port plugged 5
17 M-4 Spool Options Monoblock Directional ontrol Valves YE 9 closed & & & closed closed closed YE 0 closed & & close closed 6
18 M-4 Spool Options Monoblock Directional ontrol Valves YE 5DY NOE: WIH SEIL ODY ND SEIL OSIIONER 3 closed & & & closed 3 open 3 closed & closed 3 open YE 5YX NOE: WIH SEIL ODY ND SEIL OSIIONER & closed open 3 3 closed & & & closed 3 open 3 closed 7
19 M-4 Spool Options Monoblock Directional ontrol Valves YE 5Y NOE: WIH SEIL ODY ND SEIL OSIIONER & closed open 3 3 closed & & & closed 3 open 3 closed YE Z4 NOE: WIH SEIL ODY ND SEIL OSIIONER closed Rest in pos. & & & closed open closed & & closed
20 M-4 Spool Options Monoblock Directional ontrol Valves YE Z42 NOE: WIH SEIL ODY ND SEIL OSIIONER closed & & & closed open Rest in pos closed & & closed
21 M-4 Side Monoblock Directional ontrol Valves ype L ype L: SNDR LEVER KI ype R ype R: SNDR LEVER KI (ROED 80 DEGREE) ype SL ø9 ype SL: WIHOU NY OVER ype SL ø ype SL: WIH DUS-ROOF LE
22 M-4 Side Monoblock Directional ontrol Valves L: Joystick contorl ype L L L ype L L L
23 M-4 Side Monoblock Directional ontrol Valves Note : ONNEION KI NO INLUDE LE able Q Kits ype Q M6x.0 M6x.5 Q Kit:
24 M-4 Side Monoblock Directional ontrol Valves ype 6 6- Kit: DEEN IN OS. -0-2, WIHOU SRING ENERED Kit: 2 OSIIONS, DEEN IN OS. 0-2, WIHOU SRING ENERED Kit: 2 OSIIONS, DEEN IN OS. -0, WIHOU SRING ENERED ype 8D M D2 Kit: WIH SRING REURN O NEURL OSIION ND IN WIH M8 MLE HRED FOR DUL ONROL 23
25 M-4 Side Monoblock Directional ontrol Valves ype 8 V & V2 : N / V V V V2 Operating feature : ILO RESSURE (MIN.) R / 80 SI ILO RESSURE (MX.)... 0 R / 45 SI ype 8E ø V V V V Solenoid operating features : NOMINL VOLGE: 24VD NOMINL VOLGE OLERNE: 0% OWER RING: 5W 24
26 M-4 Side Monoblock Directional ontrol Valves ype 8ED VR 2 2 VR VRE VRE V L Operating features : ILO RESSURE: MIN. 0 R / 45 SI MX. 50 R / 725 SI MX. KRESSURE ON DRIN L: 25 R / 360 SI oil features : NOMINL VOLGE OLERNE: 0% ELERI OWER: 2 W SNDRD VOLGE: 2 VD / 24 VD 25
27 M-4 Side Monoblock Directional ontrol Valves ype 8ER L V V L V L Operating features : ILO RESSURE: MIN. 0 R / 45 SI MX. 50 R / 725 SI MX. KRESSURE ON DRIN L: 25 R / 360 SI oil features : NOMINL VOLGE OLERNE: 0% ELERI OWER: 2 W SNDRD VOLGE: 2 VD / 24 VD 26
28 M-4 Side Monoblock Directional ontrol Valves ype 8MG 8MG Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. 8MG2 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS MG3 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. ND OS With NO contact (female connector with male end) MIROSWIH Operating features : MEHNIL LIE: 5X0 5 OERIONS ELERIL LIE (RESISIVE LOD): 0 5 OERIONS - 7 / 3.5 VD 5x0 4 OERIONS - 0 / 2 VD 5x0 4 OERIONS - 3 / 28 VD With N contact (male connector with female end)
29 M-4 Side Monoblock Directional ontrol Valves ype 8 8 Kit: SRING REURN O NEURL OSIION 8- Kit: 0 SRING REURN O NEURL OSIION. (2 OSIIONS) Kit: 0 2 SRING REURN O NEURL OSIION. (2 OSIIONS) ype 9 9- Kit: DEEN IN OS., 2 WIH SRING ENERED 9-2 Kit: DEEN IN OS. 2 WIH SRING ENERED Kit: DEEN IN OS. WIH SRING ENERED 28
30 M-4 Side (Optional controls) Monoblock Directional ontrol Valves Electric wiring example oil features : 2 2 NOMINL VOLGE OLERNE: 0% ELERI OWER: 36 W SNDRD VOLGE: 2 VD / 24 VD onnector onnector 2 (bar) 400 (psi) ressure (l/min) Flow Nominal flow rating 60 L/min 6 US gpm Operating pressure (Max.) ack pressure (Max.) Fluid temperature Viscosity on outlet port with NR seals with FM seals Operating range 250 bar 5 bar -20 ~80-20 ~00 5mm 2 /s~75mm 2 /s 3650 psi 70 psi -4 F~76 F -4 F~22 F 5~75 cst mbient temperature Max. Min. 400mm 2 /s 2mm 2 /s -40 ~ cst 2 cst -40 F~40 F Internal Leakage ()-> = 00bar at 40 0 cm 3 /min 0.6 in 3 /min ype 8ES Emergency manual override ES Kit: ING IN Emergency manual override ES2 Kit: ING IN 2 Emergency manual override Emergency manual override ES3 Kit: ING IN & 2 29
31 M-4 Side (Optional controls) Monoblock Directional ontrol Valves Electric wiring example (bar) (psi) ressure onnector o battery (l/min) Flow ype 8ESN Nominal flow rating 60 L/min 6 US gpm Operating pressure (Max.) ack pressure (Max.) Fluid temperature Viscosity on outlet port with NR seals with FM seals Operating range 250 bar 5 bar -20 ~80-20 ~00 5mm 2 /s~75mm 2 /s 3650 psi 70 psi -4 F~76 F -4 F~22 F 5~75 cst mbient temperature Max. Min. 400mm 2 /s 2mm 2 /s -40 ~ cst 2 cst -40 F~40 F Internal Leakage ()-> = 00bar at 40 0 cm 3 /min 0.6 in 3 /min vailable sections from to 3 section oil features : NOMINL EL. OWER: 60 W LIMIS OF MIEN EMERURE : SNDRD VOLGE: 2-24 VD ( 0%) 8ESNLES Kit: W 3 W ESNE Kit: W 3 W
32 M-4 Special spool (Options for 8ES Kit) Monoblock Directional ontrol Valves ype 8ES3# closed & & & closed open closed ype 8ES3#2 closed & closed open closed 3
33 M-4 Special spool (Options for 8ESN Kit) Monoblock Directional ontrol Valves ype 8ESN# closed & & & closed open closed ype 8ESN#2 closed & closed open closed 32
34 M-4 (Option - Dump valve (Emergency stop valve)) Monoblock Directional ontrol Valves Electric wiring example oil features : NOMINL VOLGE OLERENE : ±0% ELERI OWER : 20W SNDRD VOLGE : 2VD / 24VD YE : ODE : DUM-G04-24VD(NO) DUM-G04-2VD(NO) YLM45424 YLM & : G/ YE : ODE : DUM-G04-24VD(N) YLM45424 DUM-G04-2VD(N) YLM
35 M-4 Outlet Monoblock Directional ontrol Valves ower eyond onversion plug (losed center plug) 2 2 M8 2 2 M3 34
36 Memo 35
37 Memo 36
YOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationMB-4 Chapters Monoblock Directional Control Valves
M-4 hapters Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34 M-4 2 2
More information45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH, IHUNG HSIEN, IWN 41468, RO. EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationPart Number Spool Qty Max Flow Max Pressure Ports. 80 lpm
Monoblock Valves M5 Monoblock, 80 lpm, Max 315 ar art Number Spool Qty Max Flow Max ressure orts M5/1S3/18L/G4-6 ylinder 1 M5/2S3/18L/G4-6 ylinder 2 M5/3S3/18L/G4-6 ylinder 3 M5/4S3/18L/G4-6 ylinder 4
More informationMB-2 Chapters Monoblock Directional Control Valves
M-2 hapters Working condition.5 Ordering code.6 Dimensions.8 erformance data.9 Inlet relief options.1 Spool options.11 side options.14 side spool positioners.16 Inlet options.2 1 For Mobile nd Industrial
More informationCTSN-4 Content Sectional Directional Control Valves
SN-4 ontent Specifications.5 Ordering code.7 Dimensions.12 erformance data.13 Inlet relief options.14 Spool options.15 side options.20 side spool positioners.23 ort relief.29 Outlet options.30 1 For Mobile
More informationHydro M t HYDRAULIC VALVES SN-4.
Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control
More information油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189
ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.
More informationTESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement
More informationDFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed center hydraulic systems.. H Fitted with
More informationp max (see table of performances) Q max (see table of performances) MD1K MD1KD bar
41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-
More informationMonoblock Directional Control Valve HDM11S/3PQ
Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3
More informationCOMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main
More informationUmschaltventile Magnet
Umschaltventile Magnet DFE 52/2 und DFE52/3 estellnr. Typ 25-1-1 DFE52/318ES-W1-12VDC 25-1-11 DFE52/318ES-W1-24VDC -1465 DFE52/318ES-Y1-12VDC -147 DFE52/318ES-Y1-24VDC Weitere Umschaltventil Varianten
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with
More informationCOMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure
More informationTESTO ITC KORINNA 28mm Allargato SECTIONAL DIRECTIONAL CONTROL VALVES
ESO IC KORINN 8mm llargato SECIONL DIRECIONL CONROL VLVES SD6 - DLS7 SD6 Simple, compact and heavy duty designed sectional valve from to sections for open and closed center hydraulic systems. H Fitted
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationDIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures
HYD RULI DIREIONL O NROL VLVES VES omponents For he ontrol Of Wide Range Of Operating Flows nd ressures V, DV, ND RORY DIREIONL ONROL VLVES; FOR FLOWS U O 20 GM (76 LM) ND WORKING RESSURES U O 2,500 SIG
More informationDFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...
DFE Content Working conditions... 54 Hydraulic circuit... 55 DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes... 64 Positioner kits... 67 Solenoid parts... 68 Dimensional data... 69 Ordering codes...
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional
More informationHV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control
INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE rchivierung: 4/6 SD5 Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple
More informationSECTIONAL DIRECTIONAL CONTROL VALVES
SECIONL DIRECIONL CONROL VLVES SDS Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve and
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H03 5 gpm (19 L/min) nominal 10 000 psi (700 bar) H03 valves are rated for 5 gpm (19 L/min) nominal flow at pressures
More informationSDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE Directional control valves with direct acting solenoid SDE-SDE General informations Simple, compact and heavy duty designed sectional valves from to sections. SDE luminium alloy inlet sections,
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves motion and progress 200--991210-N-03/09.2015 - - - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 Standard valves... p.101 Contents 8.1
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) NF D10, ISO-4401-10,
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
More informationBW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationMONOBLOCK DIRECTIONAL CONTROL VALVE
MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 6 sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data
More informationSDS400. Sectional directional control valve
SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over
More information-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14
Auxiliary valves Document: SCV-1-June 2013 Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 2/14 -Circuit mode... 2/14 -Dimensions... 3/14 -Dimensions... 4/14 -Lever mechanism...
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICIONS D08H Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More information4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series
More informationX-Series. Load-Sensing Sectional Control Block. Table of contents
X-Series Load-Sensing Sectional ontrol lock -6 Nominal pressure: 5076 psi (350 bar) Nominal flow rate l ump port: 66 gpm (250 l/min) l Working ports: 42 gpm (160 l/min) with compensator and load holding
More informationmechanical control valve
DF Working conditions This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm /s -- 46 cst viscosity at 4 C temperature. DF5 DF DF DF5 N. of available ways --3--6
More informationp max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-8; 7 l/min (185 USgpm) 35 bar (5 psi) DG5V-8; 7 l/min (185 USgpm) 35 bar (5 psi) NF D8, ISO-441-8, CEO 8 Introduction General Description he Size 8 Directiona
More informationDirectional Control Valve HDS21
Directional Control Valve Reference: 2--991232-N-2 Issue: 3.218 1/64 Contents age 1 General information... 4 1.1 Introduction... 4 1.2 Directional valve installation... 1.3 Fittings... 1.4 Hydraulic fluid...
More informationSolenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a
More informationDirectional Control Valve HDS34
Directional Control Valve Load Sensing Reference: 2 991227 E Issue: 7.9 1/54 Contents age 1 General information................................................................ 4 1.1 Introductions..................................................................
More informationCONTROL VALVES
- 1 CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
More informationORV-M45. Contents. Additional Informations
Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners
More informationAuxiliary valves. Lever. Spool positioner Check valve Spool
Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet
More information4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)
4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012
More informationB8_58 (EDBZ-VEI) RE Edition: Replaces:
4/3 Directional valve elements 8_58 with or without EDZ-VEI) secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 8_58 EDZ-VEI) RE 183-54 Edition: 2.216 Replaces:
More informationDirect Operated Proportional DC Valves
echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable
More information4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
DIRECIONL VLVE OERION Directional Valve Features, Selection and Operating Recommendations CONC INFORMION US Headquarters Dynex/Rivett Inc. 770 Capitol Drive ewaukee, WI 3072 U.S.. el: 262-69-2222 FX: 262-69-032
More informationCONTROL VALVES
- 1 CONROL VALVES resentación de la compañía HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
More informationSDH Series. Monoblock and Sectional directional valves
SDH Series Monoblock and Sectional directional valves Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information
More informationSV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)
SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow
More informationDirectional Controls
Vickers Directional Controls ilot Operated Directional Valves DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK VALVE INDEX MONOBLOCK DIRECTIONAL CONTROL VALVES For mobile and industrial hydraulic applications. MA6 (6 GPM) General Specifications 4 Dimensions 5 Performance Chart 6 Ordering Code 7 MAV12
More informationCX3 SOLENOID OPERATING PROPORTIONAL CONTROL BANKABLE VALVES FEATURES ORDERING CODE HYDRAULIC SYMBOLS
CX3 SOLENOID OERING ROORIONL CONROL NKLE VLVES CX3 series valves are used for controlling fluid direction and flow rate as a function of the supply current to the proportional control solenoid. he individual
More informationMONO-BLOCK DIRECTIONAL VALVE HDM 18 SERIES
Material specification: Standard features: Optional features available: Symbols: A/B H..C.O. RV 1 1 Weight CROSS HYDRAULICS Y LD YELLOW CAALOGUE age 2.45 HDM18/1 1 H..C.O. A B 1 RV HDM18/2/3/4 B B A A
More informationNB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES
NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES Valve Series Page...... A 2 WALVOIL FRONT-END LOADER VALVES...
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 6 Monobloc directional control valves Contents 6.1 General specifications 66 6.2 Dimensional data 67 6.3 Performances curves
More informationLUDV control block of sandwich plate design
LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar
More informationOpen center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
More informationNV452 Monoblock directional control valve
NV452 Monoblock directional control valve Product Features General Specifications Order Coding Open Center Load Sense Performance Data Inlet Options Spool Positioners Spool Options Auxilary Valves Lever
More informationCMF2 Series Applicable cylinder bore size: Max. ø160
4G/ M4G/ Individual wiring manifold ISO size 2 DIN terminal ox type 5 port pilot operated valve ISO conformed valve 2 Series pplicale cylinder ore size: Max. ø160 MN4G/ Common specifications 4G/ W4G/2
More informationHyva Valves Introduction
Introduction Hyva tipping valves Hyva offers a complete range of tipping valves to be used for different cylinder volumes. The T 0 & 00 valve can be used for flows up to 0 litre per minute. The pressure
More informationD07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
More informationIFP MRV03 RELIEF VALVE MODULE
IF MRV03 RELIEF VLVE MODULE ISO4401-03 SIZE/NF D03 DJUSLE SNDRD MICROMEER KNO EXREMELY CISE CONROL WO SGE LNCE ISON FOUR RNGES VILLE LOW OVERRIDE MRV-03- MRV-03-W MRV-03- MRV-03- RELIEF MODULR VLVE SIZE
More informationPILOT OPERATED PRESSURE RELIEF VALVE SERIES - IN-LINE MOUNTING
CONTINENTL HYDRULICS PR*W - PR*WU PILOT OPERTED PRESSURE RELIEF VLVE SERIES - IN-LINE MOUNTING 5505 WEST 123RD STREET SVGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTLHYDRULICS.COM PRECISE PR*W -
More information280 Series Stainless Steel Rotary Direction Control Valve For hydraulics in a harsh environment.
280 Series Stainless Steel Rotary Direction ontrol Valve For hydraulics in a harsh environment. he 280 Series is a high pressure, 316 stainless steel, hydraulic rotary direction control valve. It is the
More informationIFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08
IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
More informationDirectional control valves NG6...NG32 D03...D10 6
Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI
More informationSDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE6 Directional control valves with direct acting solenoid SDE-SDE6 Features Simle, comact and heavy duty designed sectional valve from to sections. Different tye of inlet covers. Different tyes of
More informationRPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15.
REK-03 Modular Valve ssembly REK-03/ /0 D n 03 p max 50 bar (366 SI) Q max 60 l/min (5.8 GM) Compact modular valve system assembly Easy to build complex circuits he possibility of subsequent rebuilding
More informationDirectional control valves catalogue NVD2 - NVS3
Directional control valves catalogue NVD - NVS Edition / roducts...... for mobile hydraulic applications Mechanical and Electric Cartridge Valves ressure control valves p max bar Counter balance valves
More informationDirectional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
More informationType : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil
ype : V20 Nominal Flow : 80 LM Maximum Flow : 135 LM (36 GM) Max. ressure : 350 ar (5000 psi) Medium : Mineral Oil Introduction: VELJN V20M Mobile directional control valve is a segment type design that
More informationDirectional Controls
VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................
More informationV050 SERIES DIRECTIONAL CONTROL VALVE
V5 SERIES DIRECTIONAL CONTROL VALVE TAKE CONTROL Take control with Muncie Power Products V5 directional control valve. The V5 is constructed with high-grade iron castings and nickel-plated spools for use
More informationLOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS
Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating
More informationDIRECIOL COROL VLVE MOOLOCK YE IDEX age - GEERL IDEX age - General features age - echnical data - Working conditions age 4 - Operating principle age 5 - Hydraulic fluids - Installation - Filtration - ipes
More informationDYNASET PRIORITY VALVE PV-SAE 3/4-1 1/4
DYNSE RIORIY VLVE V-SE 3/4 - /4 DYNSE RIORIY VLVES OF - SE SERIES RE ESECILLY DESIGNED O ENLE ESY ND RELILE INSLLION OF DYNSE HYDRULIC GENEROR O HYDRULIC SYSEM OF NY YE. DYNSE RIORIY VLVE ENLES O OERE
More information4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)
4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating
More informationDirectional Control Valve CV550
www.nimco-controls.com Directional Control Valve CV550 Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page
More informationSECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES
SECION ILE HEC2003/2004 SERIES SERVO VLVE SYSEM he HEC2003/2004 Series Servo System features a high response servo valve, a manifold mounted filter, and three different mechanical mounting options. he
More information