Mobile control block, 6-way version sandwich plate design. Type SM12, series 1X RE /05.03

Size: px
Start display at page:

Download "Mobile control block, 6-way version sandwich plate design. Type SM12, series 1X RE /05.03"

Transcription

1 RE 64 /05.03 Replaces : 0.0 obile control block, 6-way version sandwich plate design ype S, series X Nominal size aximum pressure, pump side 50 / 350* bar aximum pressure, actuator side 300 / 400* bar Flow at each directional valve element 70 l/mn * high pressure version Contents Functional description echnical data 3 Characteristic curves 4 Circuit examples, complete block 5 : control block, basic version 6, 7 : control block with intermediate inlet element 8 : control block with central tank connection 9 : control block with electro-hydraulic operation 0 : separate elements Inlet element Directional valve element 3, 4, 8, 9, 0 ypes of circuit 5, 6, 7 ilot oil supply internal and external 0 Outlet element Unit dimensions, 3, 4, 5, 6 Combination possibilities 7 Control block for the auxiliary functions on agricultural tractors 8, 9 Inlet and outlet elements 30 Directional valve elements 3, 3 Intermediate elements 33 Unit dimensions 34 ype 8S Features 6-way system Design Compact sandwich plate design, can be combined so that the control block can meet the requirements of differing machines: Inlet element Up to 0 directional valve elements Outlet element Operation type: Hydraulic echanical Electro-hydraulic Design features Circuit types: parallel, tandem or series circuits Low internal leakage Compact control block with low pressure losses Fine control Flow Good fine control due to the extensive use of fine control grooves ressure System protection via primary and secondary pressure relief valves ain areas of use / examples ini excavators, excavators, auxiliary functions on agricultlural tractors, loaders, drilling machines, lifting machines, material handling 003 by osch Rexroth G, obile Hydraulics, D-8975 Elchingen ll rights reserved. No part of this document may be reproduced or stored, processed, duplicated or circulated using electronic systems, in any form or by any means, without the prior written authorisation of osch Rexroth G, obile Hydraulics. In the event of contravention of the above provisions, the contravening party is obliged to pay compensation. S /36 RE 64 /05.03

2 Functional description, section Housing Spool 3 Check valve Operating element 5 Secondary valve 6 lug he S control block basically comprises of an inlet element, directional valve elements and an outlet element. he control blocks are designed to the 6-way principle and comprises of a housing (), control spool (), load holding check valve (3), spool actuation and return system (4), cavities (5) for the secondary pressure valves or relief/anti-cavitation valves, as well as anti-caviation valves or plugs (6). With all of the spool axes in their neutral position the flow passes via the bypass channel at zero pressure to tank. If one of the control spools is actuated then the connection from the pump to the actuator is opened via the fine control grooves, whilst the bypass is throttled by fine control grooves. If the pump pressure exceeds the actuator pressure, the pressure fluid starts to flow over the check valve to the actuator. With further movement of the control spool () the volume of fluid is increasingly diverted from the bypass channel to the actuator (fine control). he spool stroke is divided into three phases: overlap (leak-free in the neutral position), fine control range (flow and pressure), residual stroke (fully open). Due to the large fine control range of the spool stroke it is possible to sensitively control the actuators. Symbol for a parallel directional valve element 6 Connections arallel channel ypass ump, ctuators ank 5 a b 4 3 RE 64 /05.03 /36 S

3 echnical data (for applications outside these parameters, please consult us!) General Design Description flangeable ype S Installation Connections Nominal size Hydraulic 6-way system / pressure control optional threads Leakage oil flow (at 00 bar, 36 mm /s) cm 3 /mn 5 Nominal pressure edium pressure version High pressure version bar ax. operating pressure per connection edium pressure version High pressure version,, 3, N bar , bar ,, R bar 0 ax. control pressure per connection a, b max. bar 35 pst max. bar 35 pst min. bar 5 a, b (operation H00) we recommend the use of control curve 5.8 to 9.5 bar, and inlet pressure (4H6 curve no. 06) 6 to bar, and inlet pressure (4H6 curve no. 06), when the fine control of the spool from / to is increased ressure fluid ineral oil (HL, HL) to DIN 5 54 ) HEES fluids to VD as well as fluid to catalogue sheetsuitable for NR seals RE 90 : please consult us. ressure fluid temperature range C -0 to +80 (for higher temperature range, please consult us) Viscosity range mm /s 0 to 380 ermissible degree of contamination Class 9 to NS 638. We therefore recommend a filter with a minimum retention rate of ß 0 75 echanical Weight Inlet element, separate, with connections and kg.8 Directional valve element kg. Outlet element, mono block version kg.6 Outlet element, separate kg 0.9 Spool return force (without detent) N 90 to 5 (with standard spring) ax. permissible actuation force on the spool xial N 000 Radial N 6 Use guidelines ipe connections, 3, N,,,, R a, b ightening torque for the pipe connections Nm Recommended fixing Flatness of the mounting surface mm 0,5 aximum pressure in the tank line when using electro-hydraulic operation bar 5 Do not direct the water jet of a pressure washing unit directly at the unit in 3 locations S 3/36 RE 64 /05.03

4 Characteristic curves (measured at ν 4 mm /s and θ 50 C) ressure differential in the neutral position, to : for all spool variations ressure differential in bar Number of directional valve spools Flow in L/min ressure differential for a double acting spool (00-0) with switched to / to with switched to / to ressure differential in bar Flow in L/min to to to to (measured at a control block with directional valve spool) ressure differential in bar ressure differential for a single acting spool (04) with switched to with lowering position switched to / to Flow in L/min (measured at a control block with directional valve spool) to to to RE 64 / /36 S

5 Circuit example: complete control block For a sectional view of the relevant control block: see page 5 3 (pressure for downstream actuators) Outlet element type C andem directional valve element Series circuit Series directional valve element arallel directional valve element arallel circuit andem directional valve element andem circuit a b arallel directional valve element Inlet element type E S 5/36 RE 64 /05.03

6 : S control block basic version inlet element Directional valve element to 0 elements outlet element S X /... No. of directional valve spools to 0 High pressure version H 4 ) edium pressure version L Series 0 to 9 X (0 to 9: unchanged installation and connection dimensions) st directional valve element ) nd directional valve element 0th directional valve element * Seals NR seals! ttention! he compatibility of the seals and pressure fluid has to be taken into account Further details in clear text Inlet element 5 ) Inlet element, separate, with connections and (only for medium pressure version) with primary pressure relief valve EV + pressure in bar without primary pressure relief valve (with plugged cavity) E 000 Inlet element, separate, with connection, without connection (medium and high pressure) with primary pressure relief valve V + pressure in bar without primary pressure relief valve (with plugged cavity) 000 Connection threads 0 ipe thread to standard ISO 8/,,, 3 G /, G 3/4 G /4 a, b G /4 9 UNF connection threads to standard ISO 96,,, 3 3/4 UNF-, -/6 UNF- 9/6 UNF- a, b 6 UNF- Directional valve element arallel directional valve element andem directional valve element Series directional valve element ) ono block directional valve element used as an outlet element 3 ) S ) he st directional valve element is always the parallel version ) he series directional valve element is alsways used with spool variant 00 (see page 7) 3 ) he mono block directional valve element used as an outlet element type cannot be combined with the outlet element type K 4 ) he outlet element type C cannot be used in the high pressure version H 5 ) he pressure gauge connection is plugged with a metal plug Directional valve spool Operation type Operation orientation Secondary valve on connection side : see page 7 Secondary valve on connection side R Outlet element Outlet element with tank connection C Outlet element with pressure connection 3 for downstream actuators (connection is in the inlet element) 4 ) K Outlet element with tank connection at the top and pressure connection 3 for downstream actuators 3 ) Ordering example: S L X / E 0 00ZQQ 004EZH50H50K0 RE 64 / /36 S

7 : supplementary details for the directional valve element Control block, basic version (page 6), control block with intermediate inlet element (page 8), control block with a central tank connection (page 9) S connection "" connection "" Operation orientation : Without mechanical or manual operator anual operator on connection side lever up or mechanical operator with tongue on connection side 6 ) anual operator on connection side lever up or mechanical operator with tongue on connection side C anual operator on connection side lever down D anual operator on connection side lever down E anual operator on connection side lever to the front F anual operator on connection side lever to the front Secondary valves..0* ressure relief valve, direct actuated..0* ressure relief valve, pilot operated H..0* Relief/anti-cavitation check valve, pilot operated * ressure value in bar E nti-caviation check valve Q lug ype of operation :.. Spool return via a spring.. Spool return via a spring with detent in spool position C.. Spool return via a spring with detent in spool position D.. Spool return via a spring with detent in spool positions, E.. spool return via a spring with detent in spool position 3 (4th position).. anual operator (not possible with secondary valves with lever in position or ).. R5 anual operator, encapsulated lever (with rubber boot).. Z Spool end with tongue (Ø 6) H00 Hydraulic operator, spool return via a spring H400 Hydraulic operator, spool return via a spring for the 4th position spool version 004 F D C E Operation type R Operation type R Spool variants with check valve without check valve operation on connection side operation on connection side ) _ ) _ ) preferred operator location 7 ) Not possible with a mono block directional valve element used as an outlet element 8 ) Only for use with the series directional valve elements S 7/36 RE 64 /05.03

8 : S control block with intermediate inlet element S L X / No. of directional valve spools to 0 edium pressure version L Series 0 to 9 X (0 to 9: unchanged installation and connection dimensions) E... st directional valve element ) nd directional valve element Inlet element ) Inlet element with connections and with primary pressure relief valve EV + pressure in bar without primary pressure relief valve (with plugged cavity) E 000 Directional valve elements to n elements (n 5 max.) 5th directional valve element : see pages 6 and 7 Seals NR seals ttention!! he compatibility of the seals and pressure fluid has to be taken into account Connection threads 0 ipe thread to standard ISO 8/,,, 3 G /, G 3/4 G /4 a, b G /4 9 UNF connection threads to standard ISO 96,,, 3 3/4 UNF-, -/6 UNF- 9/6 UNF- a, b 9/6 UNF- Z... (n + ) directional valve element (n + ) directional valve element (n + 5) directional valve element * Intermediate inlet element ) Intermediate inlet element for nd circuit with primary pressure relief valve ZV + pressure in bar without primary pressure relief valve (with plugged cavity) Z 000 Directional valve elements (n + ) to (n + 5) elements : see pages 6 and 7 Outlet element Outlet element with tank connection R Outlet element with pressure connection 3 for downstream operators (connection in the inlet element) C Outlet element with tank connection on top and pressure connection 3 for downstream operators (cannot be combined with the mono block directional valve element type ) K Further details in clear text Ordering example : 4 S L X / EV 0 00 H00 QQ 00 H00 QQ ZV H00 QQ 00 H00 QQ R 0 ) he st directional valve element is always the parallel version ) he pressure gauge connection is plugged with a metal plug RE 64 / /36 S

9 : S control block with central tank connection S L X / No. of directional valve spools to 0 edium pressure version L Series 0 to 9 X (0 to 9: unchanged installation and connection dimensions) E... st directional valve element ) nd directional valve element Inlet element ) Inlet element with connections and with primary pressure relief valve EV + pressure in bar without primary pressure relief valve (with plugged cavity) E 000 Directional valve elements to n elements (n 5 max.) 5th directional valve element : see pages 6 and 7 ZR utual outlet element with a central tank connection (n + ) directional valve element Seals NR seals ttention!! he compatibility of the seals and pressure fluid has to be taken into account (n + ) directional valve element (n + 5) directional valve element Directional valve elements (n + ) to (n + 5) elements : see pages 6 and 7 Connection threads 0 ipe thread to standard ISO 8/,,, 3, a, b G / G 3/4 G /4 G /4... Inlet element ) Inlet element, separate, with connection without connection with through tie rods 9 UNF connection threads to with primary pressure relief valve standard ISO 96 V + pressure in bar,,, 3/4 UNF- without primary pressure relief valve (with plugged cavity) * 000, -/6 UNF- 9/6 UNF- a, b 9/6 UNF- Further details in clear text Ordering example : 4 S L X / EV H00 QQ 00 H00 QQ ZR 00 H00 QQ 00 H ) he st directional valve element is always the parallel version ) he pressure gauge connection is plugged with a metal plug S 9/36 RE 64 /05.03

10 : control block with electro-hydraulic operation S X / No. of directional valve spools to 0 High pressure version H edium pressure version L Series 0 to 9 X (0 to 9: unchanged installation and connection dimensions) inlet element ilot oil supply, internal Y ilot oil supply, external X... Inlet element Inlet element, separate, only with connection with primary pressure relief valve V + pressure in bar without primary pressure relief valve (with plugged cavity) 000 Directional valve elements to 0 elements st directional valve element ) W00 nd directional valve element W00 0th directional valve element W00 outlet element Outlet element KW Outlet element with tank connection and adjustable throttle in the bypass channel to create the pressure drop. p 8 bar is required for the start of movement ) S Outlet element with tank connection on top 3 ) K Outlet element with tank connection on top and pressure connection 3 for downstream operators 3 ) * Further details in clear text Connection threads 0 ipe thread to standard ISO 8/,,, 3 G /, G 3/4 G /4 a, b G /4 9 UNF connection Directional valve element threads to standard ISO arallel directional valve element 96 andem directional valve element,,, 3 3/4 UNF-, -/6 UNF- Spool type (see symbole page 7) 9/6 UNF- With check valve 00 a, b 9/6 UNF- 0 v, st 9/6 UNF- Without check valve Seals NR seals Electro-hydraulic operation! ttention! Spool return via a spring W00 he compatibility of the seals and Valve for electro-hydraulic operation (supplementary details on page 8) roportional valves pressure fluid has to be taken into account F DRE K 3X/8 G C4V ( Volt) to RE Secondary valves F DRE K 3X/8 G4 C4V (4 Volt) to RE * ressure relief valve, direct actuated Switching valves..0* ressure relief valve, pilot operated F WE KC 0/35 G C4V ( Volt) to RE H..0* Relief/anti-cavitation check valve, pilot operated F WE KC 0/35 G4 C4V (4 Volt) to RE * ressure value in bar E nti-caviation check valve Q lug connection port "" connection port "" ) he st directional valve element is always the parallel version ) lways in conjunction with internal pilot oil supply version Y 3 ) lways in conjunction with external pilot oil supply version X Ordering example : S L X / Y 000 W00QQ W00QQ KW 0 S L X / XV50 W004QQ W004QQ S 0 RE 64 / /36 S

11 : separate element S X / edium pressure version Series 0 to 9 Delivery possibilitites for separate elements (see combination possibilities on the pages containing the ordering details for the relevant complete block). [Ordering examples] X Y... Outlet element with flange for external pilot oil supply (page 0) [S L X / X S 0] Internal pilot oil supply (page 0) [S L X / Y 0] Inlet element ) ) (page 6) [S L X / V xxx 0] Single directional valve element (pages 6, 7, 8, 9) [S L X / 00 H 00 0] D Z Directional valve element with leak-free valve (pages 8, 9) [S L X / D00 Z Z 06] ono block directional valve element used as an outlet element (page 6) (only medium pressure range) [S L X / 00 Z R 0] Directional valve element with electro-hydraulic operator (page 0) [S L X / 00 W00 3 0] Single outlet element (pages 6, 0) [S L X / R 0] connectoin port "" connection port "" * Further details in clear text Connection threads Seals ilot oil supply, internal/external Inlet element version Directional valve element version Spool version Operation type Operation orientation Valve for electro-hydraulic operation secondary valve cavity Outlet element version ) he separate inlet element with primary pressure relief valve is suppled with a built-on, but not pres-set pilot operated relief/ anti-cavitation valve. ) he pressure gauge connection is plugged with a metal plug S /36 RE 64 /05.03

12 Inlet element Inlet element, separate, with connections and (only for medium pressure range) With primary pressure relief valve Without primary pressure relief valve EV + pressure in bar E 000 ypass channel ypass channel Inlet element, separate, with connection, without connection (medium and high pressure) With primary pressure relief valve Without primary pressure relief valve V + pressure in bar 000 ypass channel ypass channel Intermediate inlet element for a nd circuit (only for medium pressure range) With primary pressure relief valve Without primary pressure relief valve ZV + pressure in bar Z 000 inlet element ypass channel ypass channel ypass channel ypass channel arallel directional valve element ) ) If this element is to be suppled as a separate element, then it must be stated in clear text that this element is positioned directly before the intermediate inlet element. he primary pressure relief valve shown above is a pilot operated relief/anti-cavitation valve. he setting of the stated pressure value is carried out with a flow of 0 L/ mn. he pressure settings of the primary pressure relief valves must not exceed the permissible pressure of the block itself. In the delivered condition the pressure gauge connection of the inlet element is plugged with a metal plug. RE 64 /05.03 /36 S

13 Directional valve element arallel directional valve element with check valve QQ ypass channel arallel directional valve element without check valve QQ ypass channel andem directional valve element with check valve QQ ypass channel andem directional valve element without check valve QQ ypass channel Series directional valve element S QQ ypass channel S 3/36 RE 64 /05.03

14 Directional valve element arallel directional valve element andem directional valve element Series directional valve element S 00 RE 64 / /36 S

15 ypes of circuit For circuit examples: see page 5 andem directional valve element arallel directional valve element arallel directional valve element Series directional valve element andem directional valve element andem circuit Series circuit arallel circuit ixed circuit S 5/36 RE 64 /05.03

16 ypes of circuit arallel circuit II I 0 II arallel directional valve element number of actuators can be operated simultaneously 0 I arallel directional valve element Example: When directional valve elements I and II are moved to position (or ), both actuators I and II are operated. he division of flow to the individual actuators is dependent upon the working pressure of the actuator concerned. andem circuit II I 0 II andem directional valve element Only one actuator may be operated 0 I arallel directional valve element Example: When directional valve ements I and II are moved to position (or ), only only actuator I is operated. ctuator II can only be operated, when spool I is returned to neutral. (Exception: with a single acting spool, the lowering action of the cylinder is always possible). RE 64 / /36 S

17 ypes of circuit ixed circuit IV III Example : When directional valve elements I and II are simultaneously operated, the oil supply to the other elements is interrupted. 3 II 0 IV arallel directional valve element I 0 III andem directional valve element 0 II arallel directional valve element IV 0 I arallel directional valve element III II I Example : In order to operate actuator III and/or IV, directional valve spools I and II must be returned to neutral. S 7/36 RE 64 /05.03

18 Directional valve element Operation type Electro-hydraulic operation W00 he control block is controlled proportionally via a pressure reducing valve type FDRE K or switchable via a 3/-way directional valve type FWE K hese valve are directly mounted onto the S control block and are provided with pilot oil from a separate supply system or from the built-in pilot oil supply unit (see page 0). When using the type FDRE K as the control (see RE 58 03) the spool stroke is proportional to the electrical control signal provided to the proportional solenoids (load independent solenoid current). he valve control is achieved either directly from a HE6 remote control unit (see RE 9 77) or via a signal transmitter with an amplifier stage (see RE ). W00 43 / W00 4 (with proportional valves type F WE) a b W00 3 / W00 (with proportional valves type F DRE ) a b Orifice for switching time limitation (standard 0.8 mm) in conjunction with the FWE K RE 64 / /36 S

19 Directional valve element Operation type echanical operation Z C DR5 (004) EZ (004) EZ ) Hydraulic operation H00 H400 ) a b a b ) Not possible with the mono block directional valve element used as an outlet element S 9/36 RE 64 /05.03

20 Directional valve element Secondary valves H... H... For valve H the setting of the stated pressure values has been carried out at a flow of 0 L/mn... Q For valve the setting of the stated pressure values has been carried out at a flow of to 3 L/mn E... For valve the setting of the stated pressure values has been carried out at a flow of 0 L/mn b Note : he pressure setting of these valves must not exceed the maximum permissible pressure of the control block. ilot oil supply, internal and external (for electro-hydraulic actuation) ilot oil supply, internal Y ilot oil supply, external X st a b a b v RE 64 / /36 S

21 Outlet element Outlet element, separate, with tank connection (medium and high pressure version) R S ) Outlet element, separate, with pressure connection 3 for downstream actuators (connection is to be provided in the inlet element) (only for the medium pressure range) 3 C Outlet element with tank connection and pressure connection 3 for downstream actuators (medium and high pressure range) 3 K Outlet element with tank connection and adjustable throttle ) KW (For systems where there is an inadequate p in the bypass channel - e.g. when starting a movement with electro-hydraulic operation, for which the p must be 8 bar) ono block directional valve element used as an outlet element, with tank connection (only in the medium pressure range) QQR - - ono block directional valve element used as an outlet element, with pressure connection 3 for downstream actuators (connection is to be provided in the inlet element) only in the medium prerssure range) QQC Central outlet element with tank connection (only in the medium pressure range) ZR ) Only with the electro-hydraulic variants (see pages 0 and 0) S /36 RE 64 /05.03

22 Unit dimensions (in mm) Control block, medium pressure range (ordering detail L) with separate inlet element E and outlet element versions R, C or K With mono block directional valve element as an outlet element, versions R or C 90 5,5 5,5,4, ,5 5,5 4 3 ou,5 ø6 f8 73 7, , , With separate outlet element, versions R or C 90 5,5 5,5 3,4, ou,5 ø6 f8 73 7, , , With separate outlet element, version K 90 5,5 5,5 7,4, , ,5,5 ø6 f8 36, , Control lock fixing holes ø H3 4 tie rods (nut tightening torque 8 ± 0% Nm) 3 rimary pressure relief valve (tightening torque 70 ± 0% Nm) 4 lug Q (tightening torque 70 ± 0% Nm) Outlet element R C K connected with tank connected with tank Connections plugged connected with tank plugged 3 for downstream actuators for downstream actuators RE 64 /05.03 /36 S

23 Unit dimensions (in mm) Control block, medium pressure range (ordering detail L) with separate inlet element version and a mono blick directional valve element used as an outlet element version R , ,5, ,5 39,5 33,4 3 5,5 33 5, , ø6 f ,5 89 7, ,5 5,5 39,5 33, , Control block, medium pressure version (ordering detail L) or high pressure version (ordering detail H) with a separate inlet element version and a separate outlet element versions R or K With outlet element, version R ø6 f8 With outlet element, version K ,5 89 7, , Secondary valve, version --H (tightening torque 70 ± 0% Nm) 6 nti-cavitation valve, version E (tightening torque 70 ± 0% Nm) 90 5,5 5,5 39, , ,3 3 3 ø6 f S 3/36 RE 64 /05.03

24 Unit dimensions (in mm) S control block with intermediate inlet element ,5 33 5,5 5 33,4, ,5 5, , ,5 9 46, Inlet element, separate with connection (with outlet element versions R or K connection is plugged ) Directional valve element 3 Intermediate inlet element/continuous tie rods 4 Outlet element, separate, version R (or C) 7,5 5 rimary pressure relief valve (tightening torque 70 ± 0% Nm) 6 rimary pressure relief valve (tightening torque 70 ± 0% Nm) 7 4 tie rods (nut tightening torque 8 ± 0% Nm) 8 ressure gauge connection S control block with a central tank connection ,5 5, ,4, ,4 39,5 4 46, Inlet element, separate, with connection Directional valve element 3 Outlet element with a central tank connection/continuous tie rods 4 Inlet element, separate, without connection 5 rimary pressure relief valve (tightening torque 70 ± 0% Nm) 6 rimary pressure relief valve (tightening torque 70 ± 0% Nm) 7 4 tie rods (nut tightening torque 8 ± 0% Nm) 8 ressure gauge connection RE 64 / /36 S

25 Unit dimensions (in mm) S control block with electro-hydraulic operator W 00 and external pilot oil supply X 3 3 st 5 8 st 36, External pilot oil supply is fitted under the outlet element S control block with electro-hydraulic operator W 00 and internal pilot oil supply Y ilot oil supply v v ,5, S 5/36 RE 64 /05.03

26 Unit dimensions (in mm) Hydraulic operator with spool return via a spring H 00 a b 5 5 Hydraulic operator with spool return via a spring for the 4th position spool H 400 position 3 position position 0 position b 30 7,5 a 5 83 x Spring return anual operation Z 5 Ø6 F position and position ' ' / C / D (not possible with secondary valves, with the lever pointing upwards) ,5 E R » 0» , RE 64 / /36 S

27 Control block, basic version : assembly possibilities Inlet element, separate, with connection, version E (only for the medium pressure range) Inlet element, separate, without connection, version (only for the high pressure range) 3 Directional valve element 4 ono block directional valve element used as an outlet element, version R or C (only in the medium pressure range) 5 Outlet element, separate, version R or C 6 Outlet element, separate, version K 7 Check valve 8- anual operator, encapsulated lever, version R5 8- Spring return mechanism, detents in switched positions and, versions, C, D 9- anual operator, version 9- Sspring return mechanism, detent in switched position 3, version E 0- Control cover for hydraulic operation H Control cover for hydraulic operation H 00 - echanical operator with tongue, version Z - Spring return cover, version rimary pressure relief valve 3 Secondary valve ipe connections t t Ød d ipe connections 0 9 connections d Ød t t d Ød t t, 3,, G / /4 UNF- 3 4, G 3/ /6 UNF- 4 6 G /4 5,5 9/6 UNF- 6 3,5 S 7/36 RE 64 /05.03

28 : S control block for tractor auxiliary functions inlet element Directional valve elements to 0 elements intermediate element outlet element S L X / st directional valve element No. of directional valve spools to 0 edium pressure version L Series 0 to 9 X (0 to 9: unchanged installation and connection dimensions) nd directional valve element 3th directional valve element 4th directional valve element 5th directional valve element U Intermediate inlet plate with tube 3 ) U Intermediate inlet plate without tube S With spacer No code Without intermediate plate, without spacer Inlet element Inlet element with adjustable priority flow divider, without primary pressure relief valve, mounting points on top C 000 Inlet element with connections and 4 ) with primary pressure relief valve EV + pressure in bar without primary pressure relief valve (with plugged cavity) E 000 Inlet element with connection, without connection 4 ) with primary pressure relief valve V + pressure in bar without primary pressure relief valve (with plugged cavity) 000 Directional valve element arallel directional valve element arallel directional valve element with leak-free valve on connection side (ttention! It is not possible to fit a secondary valve to connection side ) D Directional valve spool Operation type Operation orientation Secondary valve on connection side : see page 9 Secondary valve on connection side Further details in clear text 06 * Connection threads 06 etric threads to standard ISO 649 (not for connections - / depth 3,5 mm), 3, N,, x.5,, R 7 x 4 x.5 Seals NR seals! ttention! he compatibility of the seals and pressure fluid has to be taken into account ) Only in conjunction with inlet element type C ) Only in conjunction with inlet element types E or 3 ) Only possible between the st and nd directional valve elements 4 ) he pressure gauge connection is plugged with a metal plug Ordering example : 4 S L X / C KD Z QR U D00 KD Z H00Z S 004 KE Z H00Q S 00 Z QQNR06 Outlet element R Outlet element with tank connection on top ) C Outlet element with pressure connection 3 for downstream actuators (connection is in the inlet element ) K Outlet element with tank connection on top and pressure connection 3 for downstream actuators ) NR Outlet element with pressure connection N for downstream actuators and tank connection R, fixing points on top ) RE 64 / /36 S

29 : supplementary information for the directional valve element Control block for auxiliary tractors (page 8) D connection "" connection "" Secondary valves..0* ressure relief valve, direct actuated..0* ressure relief valve, pilot actuated H..0* Relief/anti-cavitation check valve, pilot operated * ressure value in bar E nti-caviation check valve Q lug R Switch for change-over to single acting/double acting version Z Without secondary valve cavity! ttention! Only in connection b for a directional valve element with leak-free valve Operation orientation : anual operator on connection side lever up or mechanical operator with tongue on connection side 6 ) C anual operator on connection side lever down E anual operator on connection side lever to the front C E ype of operation :.. Spool return via a spring.. Spool return via a spring with detent in spool position C.. Spool return via a spring with detent in spool position D.. Spool return via a spring with detent in spool positions, E.. spool return via a spring with detent in spool position 3 (4th position) KD Spool return via a spring, with detent in switched positions, internal hydraulic detent release with p bar (Kick-out) KE Spool return via a spring, with detent in switched positions, internal hydraulic detent release with p bar (Kick-out) for 4 positions spool type ).. R5 anual operator, encapsulated lever (with rubber boot).. Z Spool end with tongue (Ø 6) Spool variants 7 ) with check valve Operation on connection side conventional version Operation on connection side Kick-out version Operation type R Kick-out ) Not in conjunction with a parallel directional valve element with leak-free valve, ordering detail D 6 ) referred operator orientation 7 ) ttention: he spool symbols shown are only for the parallel directional valve element, ordering detail S 9/36 RE 64 /05.03

30 Inlet element Inlet element with adjustable priority flow divider, fixing points on top C000 (Q) arallel pressure channel ypass channel Y Q adjustable priority flow, to 50 L/min Y residual flow (Y can have pressure applied that can be up to the set value of the circuit pressure relief valve) Inlet element with connection, without connection With primary pressure relief valve V + pressure in bar Without primary pressure relief valve 000 ypass channel ypass channel Inlet element with connections and With primary pressure relief valve EV + pressure in bar Without primary pressure relief valve E 000 ypass channel ypass channel Outlet element Outlet element with pressure connection N for downstream actuators and tank connection R, fixing points on top NR N R Outlet element with tank connection R Outlet element C 3 Outlet element K 3 RE 64 / /36 S

31 Directional valve element arallel directional valve element HQ ypass channel arallel directional valve element with leak-free valve on connection side D 00 ypass channel arallel directional valve element arallel directional valve element with leak-free valve on connection side D Change-over to single acting/double acting version Leak-free valve Cover for hydrualic detent release (Kick-out) S 3/36 RE 64 /05.03

32 Directional valve element Operation type (00) KDZ QQ (004) KER5 QQ (D00) KDZ For further mounting possibilities to the ordering details on page 9: see details on page 9 Switch for change-over to single acting / double acting version for a double acting spool (Z) QR Configuration, switch closed Configuration, switch open For the mounting possibilities of a secondary valve to the ordering details on page 9: see details on page 0 RE 64 / /36 S

33 Intermediate element Intermediate inlet plate with tube U Intermediate inlet plate without tube ) U Spacer S Y Y or U ou U U ) S R N ) Only possible between the st and nd directional valve elements (also see page 34) ) ube connection 8 x.5 (to ISO 9974) S 33/36 RE 64 /05.03

34 Unit dimensions (in mm) S control block for ausiliary tractor functions 40 robinet ouvert Switch open Switch closed 34 robinet fermé Stroke, 4 position spool 6 course 4 positions 6 4 Stroke, 3 position spool 7 course 3 positions 7 76, ,5,5, ,5 35 ø8f ,5 00 N R N R 36 34, , Inlet element with adjustable flow divider Directional valve element 3 Intermediate inlet plate 4 Spacer for mounting purposes 5 Outlet element 6 ube for intermediate inlet plate 7 4 tie rods (tightening torque 8 ± 0% Nm) 8 hrottle screw (range: to 50 L/mn) 9 Stop for throttle screw 0 Switch for change-over to double acting / single acting version (for orientation: see Fig. ) echanical operator with tongue (for stroke: see Fig. ) Cover for the internal hydraulic detent release types KD or KE 3 6 mounting holes 8 x.5 / mm deep RE 64 / /36 S

35 Notes S 35/36 RE 64 /05.03

36 Notes osch Rexroth G obile Hydraulics Glockeraustraße Elchingen - Germany elefon / 80 elefax / 7 74 eail documentation@rexroth.de Internet osch Rexroth DSI SS 0-9, bd Irène Joliot-Curie Vénissieux cédex - France él Fax élex Internet he data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. he details stated do not release you from the responsibility for carrying out your own assessment and verification. It must be remembered that our products are subject to a natural process of wear and ageing. RE 64 / /36 S

LUDV control block of sandwich plate design

LUDV control block of sandwich plate design LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar

More information

Pilot Control Device in Pedal Design for the Remote Control of Directional Valves, Pumps and Motors. Type 2 TH6 R, series 1X RE /05.03.

Pilot Control Device in Pedal Design for the Remote Control of Directional Valves, Pumps and Motors. Type 2 TH6 R, series 1X RE /05.03. RE 64 551/05.03 Replaces : 03.00 ilot Control Device in edal Design for the Remote Control of Directional Valves, umps and Motors ype H6 R, series 1X ype H 6 R Features rogressive, sensitive operation

More information

Hydraulic pilot control unit of sandwich plate design for the remote control of directional valves, pumps, motors

Hydraulic pilot control unit of sandwich plate design for the remote control of directional valves, pumps, motors Hydraulic pilot control unit of sandwich plate design for the remote control of directional valves, pumps, motors RE 64 55/05.06 1/8 Replaces: 05.03 ype H6 Series 1X Contents Functional description, section

More information

LUDV control block of sandwich plate design

LUDV control block of sandwich plate design LUDV control block of sandwich plate design RE 64132/05.09 1/14 Replaces: 12.02 Type SX 10 Nominal size 10 Series 1X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar Inlet flow

More information

Open center control block in mono block design MO-16, 22, 32

Open center control block in mono block design MO-16, 22, 32 Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:

More information

Compact Valve Block. Overview of contents. Features. RE / /16 Replaces: Type M8

Compact Valve Block. Overview of contents. Features. RE / /16 Replaces: Type M8 Industrial Hydraulics Electric Drives and ontrols inear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics ompact Valve lock RE 4 94/0.03 / Replaces: 0.94 ype M8 Nominal size...3

More information

Hydraulic pilot control units for armrest installation

Hydraulic pilot control units for armrest installation Hydraulic pilot control units for armrest installation RE 64 555/04.06 /2 Replaces: 05.05 Type 4TH5, 4TH6, 4TH6N Series Contents Functional description, section, symbol 2 Technical data 3 Ordering details

More information

Proportional pressure reducing valve of 3-way design Types 3DREP and 3DREPE

Proportional pressure reducing valve of 3-way design Types 3DREP and 3DREPE RE 29 184/12.02 Replaces: 12.98 roportional pressure reducing valve of 3-way design ypes 3DRE and 3DREE Nominal size 6 Series 2X Maximum operating pressure 100 bar Maximum flow 15 L/min H//D 5735/97 ype

More information

Flow sharing control block in mono block / sandwich plate design M6-15

Flow sharing control block in mono block / sandwich plate design M6-15 Flow sharing control block in mono block / sandwich plate design M6-15 RE 64321 Edition: 01.2015 Replaces: 05.2012 Size 15 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420

More information

Meter-in pressure compensator, direct operated

Meter-in pressure compensator, direct operated Meter-in pressure compensator, direct operated RE 94/.07 Replaces: 0.0 / ype ZDC Sizes 0 to Component series Maximum operating pressure bar Maximum flow l/min tb07 able of contents Content age Features

More information

Flow sharing control block in mono block / sandwich plate design M6-22

Flow sharing control block in mono block / sandwich plate design M6-22 Flow sharing control block in mono block / sandwich plate design M6-22 RE 64322 Edition: 01.2015 Replaces: 05.2012 Size 22 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420

More information

Pressure reducing valve, pilot operated Type DR

Pressure reducing valve, pilot operated Type DR RE 6 9/0.0 Replaces: 0.0 Pressure reducing valve, pilot operated Type DR Nominal sizes 0 to Series Maximum operating pressure 0 bar Maximum flow 00 L/min K660-9 Type DR 0--/... Overview of contents Features

More information

Double throttle check valve Type Z2FS 10

Double throttle check valve Type Z2FS 10 RE 7 58/0.03 Replaces:.0 Double throttle check valve Type ZFS 0 Nominal size 0 Series 3X Maximum operating pressure 35 bar Maximum flow 0 L/min Overview of contents Contents Page Features Ordering details

More information

4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE)

4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE) 4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OE) ype 4WRDE Nominal size to 35 Component series 5X Maximum operating pressure 3 bar

More information

Hydraulic remote controls

Hydraulic remote controls Hydraulic remote controls RE 6 558/05.06 1/10 Replaces: 05.03 Type TH7 Type 1TH7Z Type 1TH7QL Type 2TH7Q Series 1X Type 2TH7N Type TH7G Contents Functional description, symbol 2 Technical data 2 details

More information

Rexroth Hydraulics. Servo directional valve of 4-way design Type 4WS.2EM RE /03.99

Rexroth Hydraulics. Servo directional valve of 4-way design Type 4WS.2EM RE /03.99 RE 29 564/03.99 Replaces: 29 563 Servo directional valve of 4-way design ype 4WS.2EM Nominal size 6 Series 2X Maximum operating pressures 210 / 315 bar Maximum flow 40 L/min H//D 5994/98 ype 4WS2EM 6-2X/.E...K17EV

More information

Check valve cartridge Type M-SR

Check valve cartridge Type M-SR RE /. Replaces:.9 Check valve cartridge Type M-SR Nominal sizes to Series X Maximum operating pressure bar Maximum flow L/min Overview of contents Contents Page Features Ordering details, symbols Preferred

More information

Pump Safety Block Model DBA... / DBAW, Series 1X

Pump Safety Block Model DBA... / DBAW, Series 1X ump Safety lock odel D... / DW, Series X Sizes to 6 SI ( bar) 7 G (65 L/min) R 5 88/.95 Replaces:.9 ermits low pressure start-up and by-pass of pump Direct mounting to SE pressure port of pump Light biasing

More information

LUDV control block in mono block/sandwich plate design M7-20

LUDV control block in mono block/sandwich plate design M7-20 LUDV control block in mono block/sandwich plate design M7-20 RE 64293 Edition: 06.2013 Replaces:. Size 20 Series 3X Maximum operating pressure On the pump side 380 bar On the actuator side 420 bar Maximum

More information

Electro-Proportional Pressure Reducing and Relieving Cartridge Valves

Electro-Proportional Pressure Reducing and Relieving Cartridge Valves RE 9000-05/07.0 Bosch Rexroth G Electro-Proportional Pressure Reducing and Relieving Cartridge Valves Designation Description Cavity Data sheet Pages Proportional pressure reducing valve, direct operated

More information

Pipe burst safety valve

Pipe burst safety valve Pipe burst safety valve RE 6623/06.06 Replaces: 03.99 1/12 ype MHRB Nominal sizes 16 and 22 omponent series 3 Maximum operating pressure 350 bar Maximum flow NS 16 200 l/min NS 22 00 l/min H536 ype MHRB

More information

Proportional pressure reducing valve, 3-way variant, pilot operated

Proportional pressure reducing valve, 3-way variant, pilot operated roportional pressure reducing valve, 3-way variant, pilot operated RE 29286/1.1 Replaces: 2.8 1/14 ypes 3DRE(M) and 3DRE(M)E Sizes 1 and 16 Component series 7X Maximum pressure setting 315 bar (size 1)

More information

Hydraulic Motor (Radial Piston, Multi-Stroke)

Hydraulic Motor (Radial Piston, Multi-Stroke) Industrial Hydraulics Electric Drives and Controls inear Motion and ssembly Technologies Pneumatics Service utomation Mobile Hydraulics Hydraulic Motor (Radial Piston, Multi-Stroke) RE 15 08/10.94 1/8

More information

Flow sharing control block in sandwich plate design M7-25

Flow sharing control block in sandwich plate design M7-25 Flow sharing control block in sandwich plate design M7-25 RE 64297 Edition: 07.2016 Replaces: 06.2012 Size 25 Series 3X Maximum working pressure on the pump side 380 bar on the consumer side 420 bar Maximum

More information

4-way directional servo valve Type 4WS.2E

4-way directional servo valve Type 4WS.2E RE 29 91/06.02 Replaces: 03.93 4-way directional servo valve Type 4WS.2E Nominal size 16 Series 2X Maximum operating pressure 2/31 bar Maximum flow 3 L/min Overview of contents Contents Page Features 1

More information

Pipe burst safety valve Type MHRB

Pipe burst safety valve Type MHRB RE 6 623/03.99 Replaces: 03.98 Pipe burst safety valve ype MHRB Nominals sizes 16 and 22 Series 3 Maximum operating pressure 350 bar Maximum flow: NS 16 200 L/min NS 22 00 L/min H//D590/98 ype MHRB 22

More information

2-way flow control valve

2-way flow control valve -way flow control valve RE 864/05. Replaces: 0.03 /8 ype ZFRM Size 6 Component series X Maximum operating pressure 35 bar Maximum flow 3 l/min H5379 able of contents Contents Page Features Ordering code

More information

Single-circuit power brake valve LT 05

Single-circuit power brake valve LT 05 Single-circuit power brake valve L 05 RE 66 Edition: 09.0 Replaces: 08.00 Series X Service brake pressure 0, 60, 80, 00 and 5 bar HD 679 Features Small installation dimensions Integrated maximum pressure

More information

Closed-loop pressure and flow control system

Closed-loop pressure and flow control system Closed-loop pressure and flow control system RE 30024/11.03 Replaces: 10.02 1/12 Type SYDFE1 Series 2X H6707 Table of contents Contents age Features 1 Ordering code 2, 3 Function, section 4 Schematic diagram

More information

Proportional pressure reducing valve, in 3-way version

Proportional pressure reducing valve, in 3-way version roportional pressure reducing valve, in 3-way version RE 29184/06.11 Replaces: 12.02 1/12 ype 3DRE and 3DREE Size 6 Component series 2X Maximum operating pressure Maximum flow 100 bar 15 l/min able of

More information

Servo directional valve of 4-way design Type 4WS.2E

Servo directional valve of 4-way design Type 4WS.2E RE 9 83/7.3 Replaces:. Servo directional valve of 4-way design Type 4WS.E Nominal size Series X Maximum operating pressures 31 bar Maximum flow 1 L/min H//D 89/97 Overview of contents Contents age Features

More information

4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)

4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) 4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012

More information

Sandwich plates Porting patterns to DIN Form A and ISO 4401

Sandwich plates Porting patterns to DIN Form A and ISO 4401 s orting patterns to DIN 440 Form and ISO 440 RE 48054/0.09 Replaces: 06.06 /6 ype HSZ 6 Valve side E L H Size 6 series Maximum operating pressure 5 bar C L F D late side able of contents Contents Information

More information

4-way directional servo-valve

4-way directional servo-valve 4-way directional servo-valve RE 29564/09.10 Replaces: 01.07 1/12 Type 4WS.2E Size 6 Component series 2X Maximum operating pressure 315 bar Maximum flow 48 l/min HD5994 Table of contents Contents age Features

More information

RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.

RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8. R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to

More information

Proportional pressure relief valve Types DBE(M) and DBE(M)E

Proportional pressure relief valve Types DBE(M) and DBE(M)E RE 29 142/11.02 Replaces: 02.99 Proportional pressure relief valve Types DE(M) and DE(M)E Nominal size 32 1) Series 3X Maximum operating pressure 3 bar Maximum flow 600 L/min H/ 1764 1) NS 10; 25, Series

More information

Dual-circuit power brake valve LT 07

Dual-circuit power brake valve LT 07 Dual-circuit power brake valve L 7 RE 666 Edition:.7 Replaces: 7.6 Series X Service brake pressure, 6, 8,, and bar Maximum inlet pressure 5 bar For modular designs Features A direct-operated pressure reducing

More information

4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections

4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections 4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500

More information

Proportional flow control valve with integrated pressure compensator Type KUDSR

Proportional flow control valve with integrated pressure compensator Type KUDSR roportional flow control valve with integrated pressure compensator ype KUDSR RE 1872 Edition: 12.217 Replaces: 1.216 Size 3 Component series B Maximum operating pressure 35 bar Maximum supply flow 12

More information

Single-circuit power brake valve with compact design LT 12

Single-circuit power brake valve with compact design LT 12 Single-circuit power brake valve with compact design L 12 RE 66218/12.2013 Replaces: 05.2012 Series 3X Service brake pressure 40, 60, 80, 100 and 125 bar L 12 H Features Single-circuit power brake valve,

More information

Pressure sequence valve, direct operated

Pressure sequence valve, direct operated Courtesy of C/Flodyne/Hydradyne otion Control Hydraulic neumatic Electrical echanical (800) 426-5480 www.cmafh.com ressure sequence valve, direct operated Type DZ 6 D Nominal size 6 Series 5X aximum operating

More information

Filling valve sandwich plate

Filling valve sandwich plate Filling valve sandwich plate RE 0478/08. Replaces: 06.06 /4 Type ZSF and ZSFW Size to 00 Component series ; Maximum operating pressure 50 bar Flow up to 7000 l/min ( p = 0. bar) Table of contents Contents

More information

Pressure sequence valve, direct operated

Pressure sequence valve, direct operated ressure sequence valve, direct operated RE 26076/04.07 Replaces: 02.03 /6 Type DZ 6 D Nominal size 6 Series 5X aximum operating pressure 315 bar aximum flow 60 l/min K 4297-9 Overview of contents Contents

More information

Rexroth Hydraulics. Pressure reducing valve, pilot operated, type 3DR 3DR 10 P 6X Y 00 RE /10.97

Rexroth Hydraulics. Pressure reducing valve, pilot operated, type 3DR 3DR 10 P 6X Y 00 RE /10.97 RE 26 915/10.97 Replaces: 01.97 Pressure reducing valve, pilot operated, type 3DR Nominal size 10 Series 6X Maximum operating pressure 315 bar Maximum flow 120 L/min Contents H/A/D 5845/97 ype 3DR 10 P5-6X/315Y/00M

More information

3/2 and 4/2 directional poppet valve with solenoid actuation

3/2 and 4/2 directional poppet valve with solenoid actuation Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com 3/2 and 4/2 directional poppet valve with solenoid actuation ype M-.SED Size 10 Component

More information

Proportional flow control valve. Type 2FRE. Features. Contents. RE Edition: Replaces: 02.07

Proportional flow control valve. Type 2FRE. Features. Contents. RE Edition: Replaces: 02.07 roportional flow control valve Type 2FRE RE 2988 Edition: 206-05 Replaces: 02.07 Size 6 Component series 2X Maximum operating pressure 20 bar Maximum flow 25 l/min H639 Features 2-way version Valve with

More information

2/2-way poppet valves with solenoid operation Type KSDER1

2/2-way poppet valves with solenoid operation Type KSDER1 RE 8 36-0/0.0 Replaces: 07.0 /-way poppet valves with solenoid operation Type KSDER Build size T-3A cavity Maximum operating pressure 350 bar Maximum flow 0 L/min H/A/D 680/0 Type KSDER.A/HC... Overview

More information

2-way flow control valve

2-way flow control valve -way flow control valve RE 8155/11.10 Replaces: 11.0 1/8 Type FRM Sizes 6 and 10 Component series 1X Maximum operating pressure 315 bar Maximum flow 60 l/min H501 Overview of contents Contents Page Features

More information

Pilot control unit with end position lock for the remote control of directional valves

Pilot control unit with end position lock for the remote control of directional valves Pilot control unit with end position lock for the remote control of directional valves RE 64 553/02.07 1/12 Replaces : 05.05 Type 4THF6 or 5THF6 Series 2X Contents Functional description, section, symbol

More information

Check valve. RE 21536/07.05 Replaces: Type Z1S. Size10 Component series 3X Maximum operating pressure 315 bar Maximum flow 100 l/min 1/6

Check valve. RE 21536/07.05 Replaces: Type Z1S. Size10 Component series 3X Maximum operating pressure 315 bar Maximum flow 100 l/min 1/6 Check valve RE 2536/07.05 Replaces: 05.02 /6 ype ZS Size0 Component series 3X Maximum operating pressure 35 bar Maximum flow 00 l/min H5856 able of contents Contents Page Features Ordering code 2 Standard

More information

Dual-circuit power brake valve LT 07

Dual-circuit power brake valve LT 07 Dual-circuit power brake valve L 7 RE 666 Edition: 7.5 Replaces: 8. Series X Service brake pressure, 6, 8,, and bar Maximum inlet pressure bar For modular designs Features A direct-operated pressure reducing

More information

Hydraulic inch power brake valve LT 31

Hydraulic inch power brake valve LT 31 Hydraulic inch power brake valve LT 31 RE 66227 Edition: 10.2013 Replaces: 06.2006 Series 1X Service brake pressure 60, 80 and 100 bar Inch pressure 25 bar HAD 5793 Features Integrated inch valve Inch

More information

Proportional pressure relief valve, directly operated, without/with integrated electronics (OBE)

Proportional pressure relief valve, directly operated, without/with integrated electronics (OBE) Proportional pressure relief valve, directly operated, without/with integrated electronics (OBE) ype DBE and DBEE RE 96 Edition: 03-06 Replaces: 04.3 Size 6 Component series 6X Maximum operating pressure

More information

迅捷 PDF 编辑器. Supply pressure compensator, direct operated RE 29231/ Type ZDC

迅捷 PDF 编辑器. Supply pressure compensator, direct operated RE 29231/ Type ZDC Supply pressure compensator, direct operated ype ZDC Size 6 Component series X Maximum operating pressure 50 bar Maximum flow 35 l/min able of contents Contents Page Features Ordering code Function, section

More information

Proportional pressure reducing valve of 3-way design

Proportional pressure reducing valve of 3-way design Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com Electric Drives and Controls Hydraulics Linear Motion and ssembly echnologies neumatics

More information

Proportional pressure reducing valve, pilot operated

Proportional pressure reducing valve, pilot operated Proportional pressure reducing valve, pilot operated RE 29175/7.5 Replaces: 11.2 1/1 Types DRE and ZDRE Size 6 Component series 1X Maximum operating pressure 21 bar Maximum flow l/min H446 Table of contents

More information

4/2- and 4/3-way proportional directional valves, direct actuated, without electrical position feedback Types 4WRA and 4WRAE

4/2- and 4/3-way proportional directional valves, direct actuated, without electrical position feedback Types 4WRA and 4WRAE RE 29 0/08.0 Replaces: 06.00 /2- and /-way proptional directional valves, direct actuated, without electrical position feedback Types WR and WRE Nominal sizes 6 and Series 2X Maximum operating pressure

More information

Directional servo-valve in 4-way design

Directional servo-valve in 4-way design Directional servo-valve in 4-way design RE 2983/.11 Replaces: 7.3 1/ Type 4WS.2E... Size Component series X Maximum operating pressure 31 bar Maximum flow 1 l/min HD892 Type 4WSE2ED -X/...K31EV HD893 Type

More information

Winch control block. RE 65051/08.04 Replaces: Type YM-WCB

Winch control block. RE 65051/08.04 Replaces: Type YM-WCB Winch control block RE 65051/08.04 Replaces: 02.00 1/12 Type YM-WC Noal size 16 Component series 4X Maximum operating pressure 315 bar Maximum flow 300 / H6537 Overview Contents age Features 1 Ordering

More information

Pressure reducing valve, pilot operated

Pressure reducing valve, pilot operated Pressure reducing valve, pilot operated RE 685/.5 Replaces:. /6 Type DR K Size Component series X Maximum operating pressure 5 bar Maximum flow l/min K478/7 Table of contents Contents Page Features Ordering

More information

2- and 3-way high-response cartridge valve

2- and 3-way high-response cartridge valve 2- and -way high-response cartridge valve RE 2917/.1 Replaces: 1.5 1/24 ype.wrce.../ Size 2, 4, and 5 Component series 2 Maximum operating pressure 42 bar Maximum flow 45 l/min ype WRCE...-2/ ype 2WRCE...-2/

More information

Pressure relief valve, pilot-operated. Type DB and DBW. Features. Contents. RE Edition: Replaces:

Pressure relief valve, pilot-operated. Type DB and DBW. Features. Contents. RE Edition: Replaces: ressure relief valve, pilot-operated ype D and DW RE 580 Edition: 017-0 Replaces: 016-1 Size 10 Component series 5 Maximum operating pressure 50 bar Maximum flow 650 l/min H6088+H6089 Features For subplate

More information

Central Hydraulics Valve for Tractors with Priority Function for Steering, Trailer Brake and Pilot Oil Valve

Central Hydraulics Valve for Tractors with Priority Function for Steering, Trailer Brake and Pilot Oil Valve Central Hydraulics Valve for Tractors with Priority Function for Steering, Trailer Brake and Pilot Oil Valve RE 66235/07.06 Replaces: 05.03 /8 Type LT 43 Series 2X Maximum system pressure 250 bar H/A4629/95

More information

Pressure reducing valve, pilot operated. Type DR. Features. Contents. RE Edition: Replaces: 02.03

Pressure reducing valve, pilot operated. Type DR. Features. Contents. RE Edition: Replaces: 02.03 Pressure reducing valve, pilot operated Type DR RE 293 Edition: 2013-01 Replaces: 02.03 Sizes 10 and 2 Component series 1X; 4X Maximum operating pressure 31 bar Maximum flow 10 l/min H792 Features Contents

More information

4/2, 4/3, and 5/2, 5/3 proportional directional valve, pilot operated, without electrical position feedback without/with integrated electronics (OBE)

4/2, 4/3, and 5/2, 5/3 proportional directional valve, pilot operated, without electrical position feedback without/with integrated electronics (OBE) /, /, and /, / proptional directional valve, pilot operated, without electrical position feedback without/with integrated electronics (OE) RE 9/8. Replaces:. /8 ype.wrz,.wrze and.wrh Sizes to Component

More information

Accumulator shut-off block. Type 0532VAW. Contents. Features. RE Edition: Replaces: 07.10

Accumulator shut-off block. Type 0532VAW. Contents. Features. RE Edition: Replaces: 07.10 ccumulator shut-off block ype 0532VW RE 5012 Edition: 2016-06 Replaces: 07.10 Nominal diameter DN20, DN32 Component series 1 Maximum operating pressure 330 bar [400 psi] H7559 Features Ready for connection

More information

4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve

4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series

More information

Twin throttle check valve

Twin throttle check valve win throttle check valve RE 7506/05. Replaces: 0.03 /8 ype ZFS Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 80 l/min H5556 able of contents Contents Page Features Ordering

More information

Directional control valves, pilot-operated, with electrical position feedback and integrated electronics (OBE) Type 4WRDE. Contents.

Directional control valves, pilot-operated, with electrical position feedback and integrated electronics (OBE) Type 4WRDE. Contents. Directional control valves, pilot-operated, with electrical position feedback and integrated electronics (OE) ype 4WRDE RE 997 Edition: 6-5 Replaces: 99 (NG and NG6) Sizes and 6 Component series 6X Maximum

More information

Throttle check valve. RE 27526/04.08 Replaces: Type Z2FS

Throttle check valve. RE 27526/04.08 Replaces: Type Z2FS hrottle check valve RE 27526/04.08 Replaces:.02 /8 ype Z2FS Size 6 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm] tb022 able of contents Content Page

More information

Directional servo-valve of 4-way design

Directional servo-valve of 4-way design Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (0) 426-54 www.cmafh.com Directional servo-valve of 4-way design Type 4WSE3E 32 Size 32 Component series 5X Maximum

More information

Electrohydraulic fan drive for fixed pump systems HICFD

Electrohydraulic fan drive for fixed pump systems HICFD Electrohydraulic fan drive for fixed pump systems HICFD RE 18305-05 Edition: 01.2018 Series 1X Maximum working pressure 250 bar Maximum flow 40 l/min Features Space-saving, efficient fan drive Infinitely

More information

3-way Proportional pressure reducing valve, pilot operated

3-way Proportional pressure reducing valve, pilot operated 01/12 3-way roportional pressure reducing valve, pilot operated 6.6 ype 3DRE(M) and 3DRE(M)E Component series L6X NG 10 and 16 Max pressure 315 bar Max flow: 125L/min(size 10) 300L/min(size 16) Contents

More information

Proportional directional valves, pilot operated, with electrical position feedback and integrated electronics (OBE)

Proportional directional valves, pilot operated, with electrical position feedback and integrated electronics (OBE) Proportional directional valves, pilot operated, with electrical position feedback and integrated electronics (OE) RE 29075/08.13 Replaces: 08.04 1/22 Type 4WRKE Size 10 to 35 Component series 3X Maximum

More information

Proportional Directional Valve System

Proportional Directional Valve System roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3

More information

Throttle check valve. Type Z2FS. Features. Content. RE Edition: Replaces: 04.08

Throttle check valve. Type Z2FS. Features. Content. RE Edition: Replaces: 04.08 hrottle check valve ype Z2FS RE 27526 Edition: 205-0 Replaces: 04.08 Size 6 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm] tb022 Features Sandwich

More information

Check valve, pilot operated

Check valve, pilot operated Check valve, pilot operated RE 21460/07.05 Replaces: 06.02 1/8 Types SV and SL Size 6 Component series 6X Maximum operating pressure 315 bar Maximum flow 60 l/min H6090 Table of contents Contents Page

More information

Proportional flow control valve, 2-way version

Proportional flow control valve, 2-way version Proportional flow control valve, 2-way version Type 2FRE 6 Size 6 Component series 2X Maximum operating pressure 20 bar Maximum flow 25 l/min Table of contents Contents Page Features Ordering code 2 Standard

More information

Pressure relief valve, direct operated. Type ZDBY D, Z2DBY D. Features. Contents. RE Edition: Replaces: 01.09

Pressure relief valve, direct operated. Type ZDBY D, Z2DBY D. Features. Contents. RE Edition: Replaces: 01.09 Pressure relief valve, direct operated ype ZDBY D, ZDBY D RE 5 Edition: -8 Replaces:.9 Size 6 Component series X Maximum operating pressure 35 bar Maximum flow 6 l/min tb3 Features Contents Sandwich plate

More information

Pilot operated pressure relief valve

Pilot operated pressure relief valve 0/06 ilot operated pressure relief valve.6 ype ZD/ ZD 6V..L4X Size 6 up to 5bar up to 60 L/min Contents Function and configuration 0 Symbols 0 Specification 0 echnical data 0 Characteristic curves 0 Unit

More information

4/3 Proportional directional valve elements L85P5 with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING

4/3 Proportional directional valve elements L85P5 with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING / Proportional directional valve elements L8P with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING L8P (EDC-IP) RE 8- Edition:.6 Replaces: 7. Size 6 Series

More information

2-way flow control valve. Type 2FRM, 2FRH, 2FRW. Contents. Features. RE Edition: Replaces: 07.04

2-way flow control valve. Type 2FRM, 2FRH, 2FRW. Contents. Features. RE Edition: Replaces: 07.04 2-way flow control valve Type 2FRM, 2FRH, 2FRW RE 28389 Edition: 2013-05 Replaces: 07.04 Sizes 10 and 16 Component series 3X Maximum operating pressure 315 bar Maximum flow 160 l/min H5552 Features For

More information

Pressure reducing valve, direct operated, with pressure monitoring

Pressure reducing valve, direct operated, with pressure monitoring Pressure reducing valve, direct operated, with pressure monitoring RE 6576/04.09 Replaces: 0.03 /0 ypes DRHD and ZDRHD Size 6 Component series 4X Maximum operating pressure 00 bar Maximum flow l/min H68+60

More information

Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P

Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P RE 95533/03.96 Replaces 01.82 The scavenging and pressure relief valve block serves to maintain the feed pressure,

More information

3/3 servo directional control valve with mechanical position feedback

3/3 servo directional control valve with mechanical position feedback Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical () 426-4 www.cmafh.com 3/3 servo directional control valve with mechanical position feedback Type 4WS2EM...XN...-114

More information

Safety for Hydraulics

Safety for Hydraulics Safety for Hydraulics Compac-type Proportional Valves Reference: 301-P-9050025-EN-04 Issue: 08.2015 1/30 Contents Page 1 Functional description... 4 1.1 The load check-back signal... 4 1.2 The flow characteristics...

More information

Servo solenoid valves with positive overlap and on-board electronics

Servo solenoid valves with positive overlap and on-board electronics Servo solenoid valves with positive overlap and on-board electronics RE 29089/01.05 1/22 Replaces: 05.04 Type 4WRLE 10...35, symbols E./W. Nominal size 10, 16, 25, 35 Unit series 3X Maximum working pressure

More information

Steering unit. RE 14365/10.07 Replaces: Type LAGC. Sizes 50 to 630 Component series 1X and 2X Nominal pressure 175 bar Maximum flow 63 l/min

Steering unit. RE 14365/10.07 Replaces: Type LAGC. Sizes 50 to 630 Component series 1X and 2X Nominal pressure 175 bar Maximum flow 63 l/min Steering unit E 14365/10.07 eplaces: 07.03 1/12 ype AGC Sizes 50 to 630 Component series 1X and 2X Nominal pressure 175 bar Maximum flow 63 l/min H6211_d able of contents Content age Features 1 Ordering

More information

3/2 and 4/2 directional seat valves with solenoid actuation

3/2 and 4/2 directional seat valves with solenoid actuation 1/16 3/ and 4/ directional seat valves with solenoid actuation RE 047-XH-B/01.10 Replaces: 09.07 ype E-.SE 6...XH ype W-.SE 6...XH Size 6 Component series 6X Maximum operating pressure 40 bar Maximum flow

More information

Pressure reducing valve, direct operated

Pressure reducing valve, direct operated Pressure reducing valve, direct operated RE 6580/05.11 Replaces: 0.03 1/8 Type DR 10 DP Size 10 Component series 4X Maximum operating pressure 10 bar Maximum flow 80 l/min K4786/11 Table of contents Contents

More information

4/3 and 4/2 Proportional directional valve elements L8580 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING

4/3 and 4/2 Proportional directional valve elements L8580 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING / and / Proportional directional valve elements L88 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING L88 (EDC-P) RE 181-9 Edition:.16 Replaces: 7.1 7.1 Size 6 Series Maximum operating pressure

More information

Proportional pressure relief valve, pilot-operated, with anti-cavitation function, decreasing characteristic curve Type KBVS.2DB

Proportional pressure relief valve, pilot-operated, with anti-cavitation function, decreasing characteristic curve Type KBVS.2DB Proportional pressure relief valve, pilot-operated, with anti-cavitation function, decreasing characteristic curve Type KBVS.2DB RE 18377 Edition: 11.2017 Size 2 Series B Maximum working pressure 420 bar

More information

2-way proportional throttle valve for block installation

2-way proportional throttle valve for block installation -way proportional throttle valve for block installation RE 90/07.05 Replaces: 03.00 / Types FE; FEE Size 6 Component series X Maximum operating pressure 35 bar Maximum flow 90 L/min bei p = 0 bar H4538

More information

Traction module (Flow divider) RTM

Traction module (Flow divider) RTM Traction module (Flow divider) RTM RE 64592 Edition: 08.2016 Replaces: 05.2015 eries 1 izes 16 and 25 Nominal pressure 500 bar Maximum flow 160 l/min (size 16) 440 l/min (size 25) HD7373 Features rotects

More information

Proportional pressure reducing valve, pilot operated

Proportional pressure reducing valve, pilot operated Proportional pressure reducing valve, pilot operated Type DRE and DREE Sizes 10 and 25 1) Component series 6X Maximum operating pressure Maximum flow Table of contents Content 315 bar 300 l/min Page Features

More information

Check valve, pilot operated

Check valve, pilot operated Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 46-5480 www.cmafh.com Check valve, pilot operated Type ZS Size 6 Component series 6X Maximum operating pressure

More information

Pressure relief valve, pilot operated

Pressure relief valve, pilot operated Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 46-5480 www.cmafh.com Pressure relief valve, pilot operated Types ZDB and ZDB Nominal size 6 Component series

More information

Pressure relief valve, pilot operated

Pressure relief valve, pilot operated Pressure relief valve, pilot operated RE 25764/04.07 Replaces: 2.02 /8 Types ZDBK and Z2DBK Size 0 Component series X Maximum operating pressure 20 bar Maximum flow 80 l/min H4080 Table of contents Contents

More information

Proportional pressure reducing valve, pilot operated. Type DRE(M) and DRE(M)E. Features. Contents. RE Edition: Replaces: 11.

Proportional pressure reducing valve, pilot operated. Type DRE(M) and DRE(M)E. Features. Contents. RE Edition: Replaces: 11. Proportional pressure reducing valve, pilot operated Type DRE(M) and DRE(M)E RE 29278 Edition: 212-12 Replaces: 11.11 Size 32 Component series 6X Maximum operating pressure 315 bar Maximum flow: 3 l/min

More information

Pressure reducing valve, direct operated

Pressure reducing valve, direct operated Pressure reducing valve, direct operated RE 68/0. Replaces: 06.03 /8 Type ZDR Size 0 Component series X Maximum operating pressure 0 bar Maximum flow 80 l/min H77 Table of contents Contents Page Features

More information