Control stations and enclosures Pendant control stations, for control circuits Double insulated, type XAC-A

Transcription

1 Characteristics Environment Conforming to standards IEC , EN Approvals Protective treatment NEMKO. Special version : UL Listed A600-Q600, CSA A600-Q600 Standard version : TH Ambient air temperature C Operation : Storage : Vibration resistance 15 gn ( Hz) conforming to IEC Shock resistance 100 gn conforming to IEC Electric shock protection Class II conforming to IEC 536 and NF C Degree of protection IP 65 conforming to IEC 529 ; IK 08 conforming to EN Op. Mechanical durability cycles 1 million Enclosure Double insulated polypropylene, coloured yellow throughout Cable entry Contact block characteristics Rubber sleeve with stepped entry diameter for cable Ø 8 Ø 26 mm Rated operational characteristics ZB2-BE///, XEN-G////, XAC-S//// : " AC-15 : A600 or Ue = 600 V, le = 1.2 A or Ue = 240 V, le = 3 A $ DC- : Q600 or Ue = 600 V, le = 0.1 A or Ue = 250 V, le = 0.27 A XEN-T//// " AC-15 : A300 or Ue = 240 V, le = 3 A $ DC- : Q300 or Ue = 250 V, le = 0.27 A conforming to IEC Appendix A Thermal current (Ithe) A 10 Rated insulation voltage (Ui) V ZB2-BE///, XEN-G////, XAC-S//// : 600, degree of pollution 3 XEN-T//// : 400, degree of pollution 3 conforming to IEC Rated impulse withstand voltage (U imp) kv 6 conforming to IEC Positive operation Mushroom head pushbutton : N/C contact with positive opening operation to IEC Section 3 Contact operation N/C or N/O slow break Resistance across terminals mω 25 Operating force N Operators - with 1 N/O contact : 10 - with 1 N/C contact : 8 - with additional N/O contact : 5 - with additional N/C contact : 3 Terminal referencing Conforming to CENELEC EN 500 Short-circuit protection 10 A cartridge fuse type gg (gl) Cabling mm 2 Screw and captive cable clamp terminals. Capacity : min. 1 x 0.5, max., with or without cable end : 2 x 1.5 or 1 x 2.5 mm mm Faston connectors (on request), please consult your Regional Sales Office. Rated operational power Millions of operating cycles Conforming to IEC Appendix C. Utilisation categories AC-15 and DC-. Operating rate : 3600 operating cycles/hour. Load factor : 0.5 a.c. supply " 50/60 Hz d.c. supply $. Inductive circuit Power broken in W for 1 million operating cycles 1 0,6 0,4 0,2 230 V 7 V Ithe V Voltage V W , Current in A : pages 30075/3 to 30075/ _Ver8.10-EN.fm/2

2 Complete stations ready for use For control of single-speed motors Functions Number of Contact blocks and scheme Reference Weight operators Per direction For Emergency stop 2 1 N/O XAC-A mechanically XAC-A271 XAC-A281 1 N/C 1 N/O XAC-A XAC-A27 XAC-A N/O 1 N/C XAC-A27 (1) mechanically 1 latching Emergency stop Ø 30 mm operator ZA2-BS44 (1) 1 N/C 1 N/O 1 N/C XAC-A28 (1) N/O 1 N/C N/C N/C XAC-A271 (1) XAC-A271 XAC-A281 1 N/C 1 N/O 1 N/C N/C N/C XAC-A281 (1) (1) Also available with a trigger action Ø 30 mm latching mushroom head Emergency stop operator (ZA2-BS8). To order, replace the number 3 in the reference by the number 4. Examples : XAC-A27 becomes XAC-A27 and XAC-A271 becomes XAC-A _Ver8.10-EN.fm/3

3 Complete stations ready for use For control of single-speed motors (continued) Functions Number of Contact blocks and scheme Reference Weight operators Per direction For Emergency stop 4 1 N/O XAC-A mechanically XAC-A471 XAC-A481 1 N/C 1 N/O XAC-A N/O 1 N/C XAC-A47 (1) mechanically 1 latching Emergency 1 N/C 1 N/O 1 N/C XAC-A48 (1) stop Ø 40 mm operator ZA2-BS54 (1) 1 N/O 1 N/C N/C N/C XAC-A471 (1) XAC-A47 XAC-A48 XAC-A471 XAC-A481 1 N/C 1 N/O 1 N/C N/C N/C XAC-A481 (1) N/O XAC-A mechanically 1 N/C 1 N/O XAC-A N/O 1 N/C XAC-A67 (1) mechanically 1 latching Emergency stop 1 N/C 1 N/O 1 N/C XAC-A68 (1) Ø 40 mm operator ZA2-BS54 (1) XAC-A671 XAC-A681 XAC-A67 XAC-A68 (1) Also available with a trigger action Ø 40 mm latching mushroom head Emergency stop operator (ZA2-BS844). To order, replace the number 3 in the reference by the number 4. Examples : XAC-A47 becomes XAC-A47 and XAC-A471 becomes XAC-A _Ver8.10-EN.fm/4

4 Complete stations ready for use For control of single-speed motors (continued) Functions Number of Contact blocks and scheme Reference Weight operators Per direction For Emergency stop XAC-A671 XAC-A681 I O 6 1 N/O 1 N/C N/C N/C XAC-A671 (1) mechanically 1 latching Emergency stop Ø 40 mm 1 N/C 1 N/O 1 N/C N/C N/C XAC-A681 (1) operator ZA2-BS54 (1) 8 1 N/O on XAC-A mechanically 7 operators and 1 N/C on the 8th operators 1 N/C 1 N/O XAC-A For control of 2-speed motors Functions Number of Contact blocks and scheme Reference Weight operators Per direction For Emergency stop XAC-A871 XAC-A N/C N/O N/O XAC-A mechanically staggered XEN-G91 XAC-A N/C N/O N/O 1 N/C XAC-A29 (1) mechanically staggered 1 latching XEN-G91 Emergency stop Ø 30 mm 1 N/C N/O N/O 1 N/C N/C N/C XAC-A291 (1) operator staggered ZA2-BS44 (1) XEN-G91 XAC-A29 XAC-A291 (1) Also available with a trigger action Ø 30 mm or 40 mm latching mushroom head Emergency stop operator (ZA2-BS8) or (ZA2-BS844). To order, replace the number 3 in the reference by the number 4. Examples : XAC-A671 becomes XAC-A671 and XAC-A29 becomes XAC-A _Ver8.10-EN.fm/5

5 Complete stations ready for use For control of 2-speed motors (continued) Functions Number of Contact blocks and scheme Reference Weight operators Per direction For Emergency stop 4 1 N/C N/O N/O XAC-A mechanically staggered XEN-G91 XAC-A N/C N/O N/O 1 N/C XAC-A49 (1) mechanically staggered 1 latching XEN-G91 Emergency stop Ø 40 mm operator ZA2-BS54 (1) 1 N/C N/O N/O 1 N/C N/C N/C XAC-A491 (1) staggered XAC-A49 XAC-A491 XEN-G91 (a) (b) 4 1 N/C N/O N/O XAC-A mechanically staggered (a) XEN-G91 XAC-A492 XAC-A4923 XAC-A _Ver8.10-EN.fm/6 1 N/O (b) 4 1 N/C N/O N/O 1 N/C XAC-A4923 (1) mechanically staggered (a) 1 latching XEN-G91 Emergency stop Ø 40 mm operator ZA2-BS54 (1) 1 N/O (b) 1 N/C N/O N/O 1 N/C N/C N/C XAC-A492 (1) staggered (a) XEN-G91 1 N/O (b) (1) Also available with a trigger action Ø 40 mm latching mushroom head Emergency stop operator (ZA2-BS844). To order, replace the number 3 in the reference by the number 4. Examples : XAC-A49 becomes XAC-A49 and XAC-A491 becomes XAC-A491.

6 Empty enclosures Empty enclosures Description Number Reference Weight of ways XAC-A02 Enclosure comprising : 2 XAC-A the enclosure, - internal mounting plate, - cable sleeve for Ø 8 to 26 mm cable, - internal cable clamp, - suspension ring, - cable tie (for tightening sleeve onto cable). 3 XAC-A03 (1) XAC-A XAC-A03 5 XAC-A05 (1) XAC-A XAC-A XAC-A XAC-A Variable composition stations, pre-assembled Use Order form, page 30075/17 Equipment : contact blocks, See separate components operating heads and signalling units, pages 30075/8 to 30075/ complementary accessories (1) Enclosures with 3 cut-outs XAC-A03 and 5 cut-outs XAC-A05 cannot be fitted with a mounting adaptor for base mounted units. Illustrations : page 30075/ _Ver8.10-EN.fm/7

7 Separate components Contact blocks for front mounting Description Application Function Scheme Reference Weight Single block, Single N/O spring return speed slow break N/C N/C N/O XEN-G N/O simultaneous (1) XEN-G91 XEN-G91 2-speed N/C N/O XEN-G N/O staggered (1) Double block, Single XEN-G latching speed N/O slow break (2) N/O XEN-G3781 XEN-G3791 N/O XEN-G N/C Isolating switch, slow break, for front mounting For mounting Application Function Scheme Reference Weight in enclosures XAC-A03 Emergency 1 N/C N/C (frontal cut-out) stop N/C XAC-A05, A06, with positive A08 (frontal or opening base cut-out) operation (1) Only for use with XAC-A9/// operators. (2) Not suitable for use with the following operating heads : ZA2-BB, ZA2-BD, ZA2-BG and ZA2-BS. Illustrations : page 30075/ _Ver8.10-EN.fm/8

8 Separate components Contact blocks for base mounting Description Function Scheme Reference Weight XAC-S10/ Spring return N/O XAC-S slow break (1) N/C XAC-S N/O N/O XAC-S N/C N/C XAC-S N/C N/O XAC-S Pilot light bodies for front mounting Description Supply Scheme Reference Weight voltage ZB2-BV006 Direct supply 400 V X1 ZB2-BV Bulb not included (2) X2 Direct supply, through resistor 230 V X1 ZB2-BV Incandescent BA 9s base fitting 0 V bulb supplied X2 ZB2-BV007 (1) Not suitable for use with 3-position operating heads ZA2-BD and ZA2-BG or for mounting in enclosures XAC-A039 and XAC-A03. (2) Bulb types for use with direct supply : BA 9s base fitting incandescent bulb U 0 V or neon bulb 0 V U 400 V; maximum power 2.6 W, maximum Ø mm, maximum length 28 mm. See page 30075/. Illustrations : page 30075/ _Ver8.10-EN.fm/9

9 Separate components Operating heads for front mounting Description Colour Sold in Unit Weight lots of reference XAC-A94// Booted operators, complete White 10 XAC-A Black 10 XAC-A Green 10 XAC-A Red 10 XAC-A ZA2-BS54 Yellow 10 XAC-A Blue 10 XAC-A Brown 10 XAC-A ZA2-BS8 Operating heads for front or base mounting Description Colour Type Reference Weight Mushroom head, latching Red Ø 30 mm ZA2-BS Turn to release (Emergency stop) Ø 40 mm ZA2-BS ZA2-BS Mushroom head, trigger action, Red Ø 30 mm ZA2-BS latching Turn to release (Emergency stop) Ø 40 mm ZA2-BS ZA2-BD/ Mushroom head, latching Red Ø 30 mm ZA2-BS Key release - Ronis n o 455 Key withdrawal in rest (unactuated) position Ø 40 mm ZA2-BS (Emergency stop) Selector switches, Black 2 position stay put ZA2-BD standard handle (Not to be used with XEN-G//// contact blocks) 3 position stay put ZA2-BD (1) ZA2-BG/ ZA2-BB/ Key switches 2 position stay put ZA2-BG (Ronis key no 455) Key withdrawal in left and right hand positions 3 position stay put ZA2-BG (1) Wobblesticks (2) Black ZA2-BB Operates in all directions, for Fast stop function Red ZA2-BB (1) Only suitable for front mounting. (2) Base mounting recommended Other versions Key release mushroom head pushbuttons with other key numbers. Selector switches with other mechanical functions. Key switches with other mechanical functions or Ronis key numbers. Please consult your Regional Sales Office. Illustrations : page 30075/ _Ver8.10-EN.fm/10

10 Separate components Pilot light heads Description Colour Reference Weight For use with incandescent bulbs ZA2-BV0/ Lens cap White ZA2-BV with fixing bezel Green ZA2-BV DL1-C//// DL1-CF/// Red ZA2-BV Yellow ZA2-BV Blue ZA2-BV Clear ZA2-BV For use with neon bulbs Lens cap Green ZA2-BV with fixing bezel Red ZA2-BV Yellow ZA2-BV XAC-A009 Clear ZA2-BV XAC-A960 XAC-B961 XAC-A982 ZB2-SZ3 XAC-A971 Bulbs (Sold in lots of 10) Description Voltage Unit Weight reference Incandescent 6 V DL1-CB BA 9s base fitting Maximum power : 2.6 W V DL1-CE Maximum Ø : mm Maximum length : 28 mm 24 V DL1-CE V DL1-CE V DL1-CE Neon 0 V DL1-CF BA 9s base fitting Maximum power : 2.6 W 230 V DL1-CF Maximum Ø : mm Maximum length : 28 mm 400 V DL1-CF Complementary accessories, tools Description Reference Weight Protective cable sleeve For cable Ø 8 to mm XAC-A For cable Ø 8 to 26 mm XAC-A Mechanical interlock With fixing screws XAC-A for 2 operators Blanking plug With seal and fixing nut ZB2-SZ XAC-A983 XBF-X Adaptor for self-supporting Mounted with protective sleeve XAC-B cable type BBAP for cable Ø 8 to 26 mm Lower support ring XAC-A Protective guards For selector switch (std. handle) XAC-A for base mounted units or mushroom head pushbutton For key switch or key release XAC-A latching mushroom head pushbutton Bulb extractor For BA 9s base fitting bulbs XBF-X Illustrations : page 30075/ _Ver8.10-EN.fm/

11 Legend plates 30 x 40 mm with symbols conforming to NF E 52-4 Function Reference Weight Function Reference Weight Symbol Symbol Raise, slow Lower, slow ZB2-BY ZB2-BY Raise, fast Lower, fast ZB2-BY ZB2-BY Raise, slow-fast Lower, slow-fast Black symbol, white bacround ZB2-BY ZB2-BY Right, slow Left, slow ZB2-BY ZB2-BY Right, fast Left, fast White symbol, black bacround ZB2-BY ZB2-BY White symbol, red bacround Right, slow-fast Left, slow-fast ZB2-BY ZB2-BY Forward, slow Reverse, slow ZB2-BY ZB2-BY Forward, fast Reverse, fast ZB2-BY ZB2-BY Forward, slow-fast Reverse, slow-fast ZB2-BY ZB2-BY Slew right, slow Slew left, slow ZB2-BY ZB2-BY Slew right, fast Slew left, fast ZB2-BY ZB2-BY Slew right, slow-fast Slew left, slow-fast ZB2-BY ZB2-BY Slow Fast ZB2-BY ZB2-BY Klaxon Start-Klaxon ZB2-BY ZB2-BY Start Stop 0 ZB2-BY ZB2-BY Illustrations : page 30075/ _Ver8.10-EN.fm/

12 Legend plates 30 x 40 mm White Black Red Text Reference Weight Text Reference Weight Start functions : white characters on black bacround. Stop functions : white characters on red bacround. Blank Black or red ZB2-BY White or yellow ZB2-BY bacround bacround ZB2-BY01 With standard French texts With standard English texts White Black Yellow For pushbuttons Marche ZB2-BY Start ZB2-BY Arrêt ZB2-BY Stop ZB2-BY ZB2-BY4101 Avant ZB2-BY Forward ZB2-BY Arrière ZB2-BY Reverse ZB2-BY Montée ZB2-BY Up ZB2-BY Descente ZB2-BY Down ZB2-BY Droite ZB2-BY Right ZB2-BY Gauche ZB2-BY Left ZB2-BY En service ZB2-BY On ZB2-BY Hors service ZB2-BY Off ZB2-BY Sous tension ZB2-BY Power on ZB2-BY Lent ZB2-BY Slow ZB2-BY Vite ZB2-BY Fast ZB2-BY Klaxon ZB2-BY For selector switches Arrêt-Marche ZB2-BY Hors-en ZB2-BY Off-On ZB2-BY With special texts (to be specified when ordering) 2 lines maximum, characters per line. White characters ZB2-BY Black characters ZB2-BY on black on white bacround bacround White characters ZB2-BY Black characters ZB2-BY on red on yellow bacround bacround Other versions Illustrations : page 30075/16 Legend plates with texts in other languages. Please consult your Regional Sales Office _Ver8.10-EN.fm/

13 Dimensions XAC-A pendant stations for control circuits Ø inner fl8 10 fl fl15 17 fl18 fl 26 (1) (2) b1 30 b (3) 107 (4) c Number of ways b b c (1) For 2 and 3-way XAC-A stations (2) For 4 to 8-way XAC-A stations (3) With mushroom head operator (4) With mushroom head, trigger action, operator Protective guards for base mounted units XAC-A982 XAC-A : pages 30075/3 to 30075/ 30075_Ver8.10-EN.fm/

14 Schemes - typical application examples For control of single-speed reversing motor (Contact blocks ) For control of 2-speed reversing motor (2 contact blocks XEN-G91) S1 S2 A2 S2 S1 KM1 KM A1 KM2 A2 A2 S1 S2 A1 KM2 A1 A1 KM1 A1 A2 A2 KM : high speed contactor : pages 30075/3 to 30075/ 30075_Ver8.10-EN.fm/15

15 30075_Ver8.10-EN.fm/16

16 Order form (specimen suitable for photocopying) Variable composition stations, pre-assembled Customer Industries Company Order N Delivery date Sales office - Subsidiary Co. Order N Enter the order with XAC-A09 reference Unit reference of empty enclosure, see page 30075/7 Number of identical stations Enclosure price (1) XAC- A Legend plates Contact blocks Operating heads see pages 30075/ and 30075/ or pilot light bodies or pilot light bodies see pages 30075/8 and 30075/9 or blanking plugs see pages 30075/10 and 30075/ Reference Unit price Reference Unit price Reference Unit price Total price Unit mounted in base of enclosure (if required) (Except when using XAC-A03 and XAC-A05) 10 Complementary accessories, see page 30075/ (enter a cross in the appropriate box or boxes) Description Reference Unit price Adaptor for self-supporting cable type BBAP for use with cable entry sleeve Ø 8 to 26 mm XAC-B Lower support ring XAC-A971 Protective guard for selector switch (std. handle) 16 or mushroom head pushbutton, mounted in base XAC-A982 Protective guard for key switch or latching mush- 17 room head key release pushbutton, mtd. in base XAC-A Mechanical interlocking (2) Reference Quantity Unit price XAC-A009 Pre-assembled Quantity of operating Additional cost XAC-9VA for heads or blanking plugs 1 head or 1 plug assembly Total price of assembled pendant station (1) Get the empty enclosure price. (2) Connect with a line the 2 ways which require mechanical interlocking. Examples : combinations possible combinations not possible X 30075_Ver8.10-EN.fm/17