Pendant control stations
|
|
- Blaise Reynard Alexander
- 6 years ago
- Views:
Transcription
1 : pages 30075/3 to 30075/6 Characteristics Environment Conforming to standards IEC , EN , IEC 337-1, VDE Approvals Protective treatment NEMKO. Special version : UL Listed A600-Q600, CSA A600-Q600 Standard version : TH Ambient air temperature C Operation : Storage : Vibration resistance 15 gn ( Hz) conforming to IEC Shock resistance 100 gn conforming to IEC Electric shock protection Class II conforming to IEC 536 and NF C Degree of protection IP 65 conforming to IEC 529 ; IP 657 conforming to NF C Op. Mechanical durability cycles 1 million Enclosure Cable entry Contact block characteristics Double insulated polypropylene, coloured yellow throughout Rubber sleeve with stepped entry diameter for cable Ø 8 Ø 26 mm Rated operational characteristics ZB2-BEiii, XEN-Giiii, XAC-Siiii : c AC-15 : A600 or Ue = 600 V, le = 1.2 A or Ue = 240 V, le = 3 A a DC- : Q600 or Ue = 600 V, le = 0.1 A or Ue = 250 V, le = 0.27 A XEN-Tiiii : c AC-15 : A300 or Ue = 240 V, le = 3 A a DC- : Q300 or Ue = 250 V, le = 0.27 A conforming to IEC Appendix A Thermal current (Ithe) A 10 Rated insulation voltage (Ui) V ZB2-BEiii, XEN-Giiii, XAC-Siiii : 600, degree of pollution 3 XEN-Tiiii : 400, degree of pollution 3 conforming to IEC Rated impulse withstand voltage (U imp) kv 6 conforming to IEC Positive operation Mushroom head pushbutton : N/C contact with positive opening operation to IEC Section 3 Contact operation N/C or N/O slow break Resistance across terminals mω 25 Operating force N Operators - with 1 N/O contact : 10 - with 1 N/C contact : 8 - with additional N/O contact : with additional N/C contact : + 3 Terminal referencing Conforming to CENELEC EN 500 Short-circuit protection 10 A cartridge fuse type gg (gl) Cabling mm 2 Screw and captive cable clamp terminals. Capacity : min. 1 x 0.5, max., with or without cable end : 2 x 1.5 or 1 x 2.5 mm mm Faston connectors (on request), please consult your Regional Sales Office. Rated operational power Millions of operating cycles Conforming to IEC Appendix C. Utilisation categories AC-15 and DC-. Operating rate : 3600 operating cycles/hour. Load factor : 0.5 a.c. supply c 50/60 Hz d.c. supply a p Inductive circuit Power broken in W 1 for 1 million operating cycles 0,6 0,4 0,2 230 V 7 V Ithe V Voltage V p W Te 0, Current in A
2 Variable composition stations, pre-assembled Replacement empty enclosures Stations for assembly by Telemecanique (see Order form, page 30075/17) Description Number Reference Weight of ways XAC-A029 Enclosure comprising : 2 XAC-A the enclosure, - internal mounting plate, - cable sleeve for Ø 8 to 26 mm cable, - internal cable clamp, 3 XAC-A039 (1) suspension ring, - cable tie (for tightening sleeve onto cable). 4 XAC-A XAC-A059 (1) XAC-A XAC-A XAC-A XAC-A039 XAC-A9 Equipment : contact blocks, See separate components operating heads and signalling units, pages 30075/8 to 30075/ complementary accessories Replacement empty enclosures Description Number Reference Weight of ways Enclosure comprising : 2 XAC-A the enclosure, - internal mounting plate, - cable sleeve for Ø 8 to 26 mm cable, - internal cable clamp, - suspension ring, 3 XAC-A03 (1) cable tie (for tightening sleeve onto cable). XAC-A02 4 XAC-A XAC-A05 (1) XAC-A XAC-A XAC-A03 XAC-A XAC-A (1) Enclosures with 3 cut-outs (XAC-A039 and XAC-A03) cannot be fitted with a mounting adaptor for base mounted units. Te
3 Separate components Contact blocks for front mounting Description Application Function Scheme Reference Weight Single block, Single N/O ZB2-BE spring return speed slow break 3 4 ZB2-BE101 ZB2-BE102 N/C ZB2-BE N/C + N/O XEN-G N/O simultaneous (1) XEN-G91 XEN-G91 2-speed N/C + N/O XEN-G N/O staggered (1) XEN-G3781 XEN-G3791 Double block, Single XEN-G latching speed N/O slow break (2) N/O N/O N/C XEN-G Isolating switch, slow break, for front mounting For mounting Application Function Scheme Reference Weight in enclosures XEN-T92 XAC-A039 Emergency 1 N/C + N/C XEN-T (frontal cut-out) stop + N/C XAC-A049, A069, with positive A089 (frontal or opening base cut-out) operation (1) Only for use with XAC-A9iii operators. (2) Not suitable for use with the following operating heads : ZA2-BB, ZA2-BD, ZA2-BG and ZA2-BS. Te
4 Separate components Contact blocks for base mounting Description Function Scheme Reference Weight Spring return N/O XAC-S slow break (1) XAC-S10i N/C XAC-S N/O + N/O XAC-S N/C + N/C XAC-S N/C + N/O XAC-S Pilot light bodies for front mounting Description Supply Scheme Reference Weight voltage ZB2-BV006 Direct supply 400 V X1 ZB2-BV Bulb not included (2) X2 Direct supply, through resistor 230 V X1 ZB2-BV Incandescent BA 9s base fitting 0 V bulb supplied X2 ZB2-BV007 (1) Not suitable for use with 3-position operating heads ZA2-BD and ZA2-BG or for mounting in enclosures XAC-A039 and XAC-A03. (2) Bulb types for use with direct supply : BA 9s base fitting incandescent bulb U 0 V or neon bulb 0 V U 400 V; maximum power 2.6 W, maximum Ø mm, maximum length 28 mm. See page 30075/. Te 23
5 Separate components Operating heads for front mounting Description Colour Sold in Unit Weight lots of reference XAC-A94ii ii Booted operators, complete White 10 XAC-A Black 10 XAC-A Green 10 XAC-A Red 10 XAC-A ZA2-BC4 Yellow 10 XAC-A Blue 10 XAC-A Brown 10 XAC-A ZA2-BS54 Operating heads for front or base mounting Description Colour Type Reference Weight Mushroom head, spring return Red Ø 30 mm ZA2-BC (Normal stop) Ø 40 mm ZA2-BC ZA2-BS Mushroom head, latching Red Ø 30 mm ZA2-BS Turn to release (Emergency stop) Ø 40 mm ZA2-BS ZA2-BDi Mushroom head, latching Red Ø 30 mm ZA2-BS Key release - Ronis n o 455 Key withdrawal in rest (unactuated) position Ø 40 mm ZA2-BS (Emergency stop) Selector switches, Black 2 position stay put ZA2-BD standard handle (Not to be used with XEN-Giiii contact blocks) 3 position stay put ZA2-BD (1) ZA2-BGi ZA2-BBi Key switches 2 position stay put ZA2-BG (Ronis key n o 455) Key withdrawal in left and right hand positions 3 position stay put ZA2-BG (1) Wobblesticks (2) Black ZA2-BB Operates in all directions, for Fast stop function Red ZA2-BB (1) Only suitable for front mounting. (2) Base mounting recommended 24 Te Other versions Key release mushroom head pushbuttons with other key numbers. Selector switches with other mechanical functions. Key switches with other mechanical functions or Ronis key numbers. Please consult your Regional Sales Office.
6 Separate components Pilot light heads Description Colour Reference Weight For use with incandescent bulbs ZA2-BV0i Lens cap White ZA2-BV with fixing bezel Green ZA2-BV DL1-Ciiii DL1-CFiii Red ZA2-BV Yellow ZA2-BV Blue ZA2-BV Clear ZA2-BV For use with neon bulbs Lens cap Green ZA2-BV with fixing bezel Red ZA2-BV Yellow ZA2-BV XAC-A009 Clear ZA2-BV XAC-A960 XAC-B961 XAC-A982 ZB2-SZ3 XAC-A971 Bulbs (Sold in lots of 10) Description Voltage Unit Weight reference Incandescent 6V DL1-CB BA 9s base fitting Maximum power : 2.6 W V DL1-CE Maximum Ø : mm Maximum length : 28 mm 24 V DL1-CE V DL1-CE V DL1-CE Neon 0 V DL1-CF BA 9s base fitting Maximum power : 2.6 W 230 V DL1-CF Maximum Ø : mm Maximum length : 28 mm 400 V DL1-CF Complementary accessories, tools Description Reference Weight Protective cable sleeve For cable Ø 8 to mm XAC-A For cable Ø 8 to 26 mm XAC-A Mechanical interlock With fixing screws XAC-A for 2 operators Blanking plug With seal and fixing nut ZB2-SZ XAC-A983 XBF-X Adaptor for self-supporting Mounted with protective sleeve XAC-B cable type BBAP for cable Ø 8 to 26 mm Lower support ring XAC-A Protective guards For selector switch (std. handle) XAC-A for base mounted units or mushroom head pushbutton For key switch or key release XAC-A latching mushroom head pushbutton Bulb extractor For BA 9s base fitting bulbs XBF-X Te 25
7 Legend plates 30 x 40 mm with symbols conforming to NF E 52-4 Function Reference Weight Function Reference Weight Symbol Symbol Raise, slow Lower, slow ZB2-BY ZB2-BY Raise, fast Lower, fast ZB2-BY ZB2-BY Raise, slow-fast Lower, slow-fast Black symbol, white bacround ZB2-BY ZB2-BY Right, slow Left, slow ZB2-BY ZB2-BY Right, fast Left, fast White symbol, black bacround ZB2-BY ZB2-BY White symbol, red bacround Right, slow-fast Forward, slow Left, slow-fast ZB2-BY ZB2-BY Reverse, slow ZB2-BY ZB2-BY Forward, fast Reverse, fast ZB2-BY ZB2-BY Forward, slow-fast Reverse, slow-fast ZB2-BY ZB2-BY Slew right, slow Slew left, slow ZB2-BY ZB2-BY Slew right, fast Slew left, fast ZB2-BY ZB2-BY Slew right, slow-fast Slew left, slow-fast ZB2-BY ZB2-BY Slow Fast ZB2-BY ZB2-BY Klaxon Start-Klaxon ZB2-BY ZB2-BY Start Stop 0 ZB2-BY ZB2-BY Te
8 White Black Red Legend plates 30 x 40 mm Text Reference Weight Text Reference Weight Start functions : white characters on black bacround. Stop functions : white characters on red bacround. Blank Black or red ZB2-BY White or yellow ZB2-BY bacround bacround ZB2-BY01 With standard French texts With standard English texts White Black Yellow For pushbuttons Marche ZB2-BY Start ZB2-BY Arrêt ZB2-BY Stop ZB2-BY ZB2-BY4101 Avant ZB2-BY Forward ZB2-BY Arrière ZB2-BY Reverse ZB2-BY Montée ZB2-BY Up ZB2-BY Descente ZB2-BY Down ZB2-BY Droite ZB2-BY Right ZB2-BY Gauche ZB2-BY Left ZB2-BY En service ZB2-BY On ZB2-BY Hors service ZB2-BY Off ZB2-BY Sous tension ZB2-BY Power on ZB2-BY Lent ZB2-BY Slow ZB2-BY Vite ZB2-BY Fast ZB2-BY Klaxon ZB2-BY For selector switches Arrêt-Marche ZB2-BY Hors-en ZB2-BY Off-On ZB2-BY With special texts (to be specified when ordering) 2 lines maximum, characters per line. White characters ZB2-BY Black characters ZB2-BY on black on white bacround bacround White characters ZB2-BY Black characters ZB2-BY on red on yellow bacround bacround Other versions Legend plates with texts in other languages. Please consult your Regional Sales Office. Te 27
9 : pages 30075/3 to 30075/ Dimensions XAC-A pendant stations for control circuits Ø inner Ø8 10 Ø Ø15 17 Ø18 Ø 26 (1) (2) b1 30 b (3) 107 (4) c Number of ways b b c (1) For 2 and 3-way XAC-A stations (2) For 4 to 8-way XAC-A stations (3) With mushroom head operator (4) Avec bouton coup de poing infraudable Protective guards for base mounted units XAC-A982 XAC-A Te
10 : pages 30075/3 to 30075/ Schemes - typical application examples For control of single-speed reversing motor (Contact blocks ZB2-BE101 + ZB2-BE102) For control of 2-speed reversing motor (2 contact blocks XEN-G91) S1 S1 33 S2 S S2 S1 KM2 A1 KM1 A1 A2 A2 KM1 A1 KM KM2 A2 A1 A1 A2 A2 KM : high speed contactor Te 29
11 XAC-B961 XEN-T92 XEN-G1 91 XAC-A941 ZA2-BS54 XEN-G37 1 XAC-A009 ZA2-BS834 ZB2-BE ZA2-BS44 ZA2-BS XAC-S ZB2-BY ZB2-BV00 ZA2-BS74 ZB2-BY ZA2-BD XAC-A982 ZA2-BG XAC-A971 ZA2-BD ZA2-BB XAC-A983 ZA2-BV0 30 Te ZA2-BG ZA2-BSii ZB2-SZ3
Control stations and enclosures Pendant control stations, for control circuits Double insulated, type XAC-A
Characteristics Environment Conforming to standards IEC 947-5-1, EN 60947-5-1 Approvals Protective treatment NEMKO. Special version : UL Listed A600-Q600, CSA A600-Q600 Standard version : TH Ambient air
More informationPendant control stations 6
Characteristics For control circuits Environment Conformity to standards EN/IEC 0-- EN/IEC 00-, UL 0, CSA C- n EN/IEC 0-- and EN/ISO 0: 00 for versions with trigger action Emergency stop Protective treatment
More informationXACA871 pendant control station XAC-A - 8 pushbuttons
Characteristics pendant control station XAC-A - 8 pushbuttons Complementary Control station colour Connections - terminals Mechanical durability Cable entry Contact code designation [Ithe] conventional
More informationDouble insulated, types XCK-P and XCK-T. With head for linear movement (plunger) operators
Double insulated, types XCK-P and XCK-T Presentation XCK-P with 1 cable entry, conforming to CENELEC EN 57 With head for linear movement (plunger) operators Page 18 With head for rotary movement (lever)
More informationXACA871 pendant control station XAC-A - 8 pushbuttons
Characteristics pendant control station XAC-A - 8 pushbuttons Complementary Control station colour Connections - terminals Mechanical durability Cable entry Contact code designation [Ithe] conventional
More informationXACA871 pendant control station XAC-A - 8 pushbuttons
Characteristics pendant control station XAC-A - 8 pushbuttons Main Range of product Product or component type Device short name Complementary Control station type Enclosure material Electrical circuit
More informatione.
e. e. e. e. e. e. e. e. e. e. Characteristics Control and signalling units Ø 220 Harmony XB7 Monolithic pushbuttons, switches and pilot lights 1 2 Environment Protective treatment Standard version TH Ambient
More informationLimit switches 3. Page 92. Page 92
Presentation, general characteristics b XCKS with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page Environment characteristics Conformity to standards
More informationControl & Signalling Devices 22.5 mm. RoHS. Compliant
Control & Signalling Devices 22.5 mm RoHS Compliant Contents Characteristics General Characteristics Products Push Buttons, Selector Switches, Latching Mushroom Head Push Buttons, Pilot Lights & Illuminated
More informationLimit switches. 6 Thermoplastic roller lever 1 direction of actuation SEN TRONIC AG. Presentation
Presentation Variable composition Spring-rod lever with thermoplastic end () Spring-rod lever, metal () Variable length thermoplastic roller lever () Round rod lever, thermoplastic, Ø mm L = mm () ZCK
More informationSafety detection solutions
General, Preventa XY C Presentation are designed to: b avert hazards (dangerous phenomena) at the earliest possible moment, or to reduce risks which could cause injury to persons or damage either to machines
More informationLimit switches. Presentation. OsiSense XC Special For hoisting and material handling applications, type XCR. b XCR
Presentation type XCR b XCR v With head for rotary movement operators, spring return to off position contact actuation position per direction Page / v With head for rotary movement operators, stay put
More informationLimit switches. 7 Page 71. Presentation. OsiSense XC Basic Compact design, plastic, with reset knob, types XCNR and XCNTR. b XCNR.
Presentation Compact design, plastic, with reset knob, types XCNR and XCNTR b XCNR with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page b XCNTR with
More informationXAL control stations for Harmony style 5 Ø 22 control and signalling units with double insulated bezel Complete stations (screw clamp connections)
pages /2 and / pages /4 and /5 Complete stations (screw clamp connections) References Start or function (light grey base RAL 705, dark grey lid RAL 7016 ) Description Type Contact type Marking Reference
More informationK50H004UP cam changeover switch - 4-pole A - screw mounting
Characteristics cam changeover switch - 4-pole - 60-50 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
More informationC & S 22 mm NON-ILLUMINATED PUSHBUTTONS METAL BEZEL
C & S 22 mm NON-ILLUMINATED PUSHBUTTONS METAL BEZEL OPERATING HEADS, - IP65 CONTROL UNITS WITH CHROMIUM PLATED METAL BEZEL PROJECTING PUSH BUTTON BOOTED PUSH BUTTON IP66 WITH TRANSPARENT BOOT IP66 MUSHROOM
More informationTeSys contactors 5. Characteristics 5. Mini-contactors TeSys LC1 SK and LP1 SK. Environment Rated insulation voltage (Ui) 5/30
Characteristics TeSys contactors Mini-contactors TeSys LC SK and LP SK Environment Rated insulation voltage (Ui) Conforming to 0, VDE 00 gr C,BS, CSA - n, UL 0 V 0 Conforming to standards IEC 0, NF C -0,
More informationK30H001YP cam star-delta switch - 3-pole A - screw mounting
Characteristics cam star-delta switch - 3-pole - 60-32 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
More informationXB5AD33 SELECTOR SWITCH 230VAC 2AMP XB5 +OPTIONS
Characteristics SELECTOR SWITCH 230VAC 2AMP XB5 +OPTIONS Product availability : Stock - Normally stocked in distribution facility Price* : 68.00 USD Main Range of product Product or component type Device
More informationXACA871 pendant control station XAC-A - 8 pushbuttons
haracteristics pendant control station XA-A - 8 pushbuttons Main Range of product Product or component type Device short name omplementary ontrol station type Enclosure material Electrical circuit type
More information3 - Protection components Motor circuit-breakers
Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page
More informationXCKJ390559H29EX limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx
Characteristics limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx Main Range of product OsiSense ATEX D Series name Standard format Product or component type Limit switch Device short name XCKJ
More informationOiltight Switches & Pilot Devices
Oiltight Emergency Stop Stations Part Numbers: Emergency Stop Stations Description Contacts Plastic Bezel Metal Bezel Ø 40mm Pushlock Turn Reset 1NO-1NC HW1X-BV411-R* HW4X-BV411-R* 2NC HW1X-BV402-R* HW4X-BV402-R*
More informationComponents for safety applications
Presentation CS-P with 1 cable entry With rotary operating head, with elbowed lever (flush with rear of switch) straight lever, f hinged covers and guards Pages /4, /4, /44 CS-PR with 1 cable entry With
More informationCharacteristics TeSys contactors 0 TeSys k contactors and reversing contactors
90 Characteristics TeSys contactors 0 TeSys k contactors and reversing contactors Environment characteristics Conforming to standards IEC 60947, NF C 63-110, VDE 0660, BS 5424 Product certifications LCp
More informationLimit switches. Presentation. OsiSense XC Special For hoisting and material handling applications XCR. b XCR
Presentation For hoisting and material handling applications XCR b XCR v With head for rotary movement operators, spring return to off position 1 contact actuation position per direction Page 326/6 v With
More informationContactors. Mini-contactors type LC1-SKGC for use in modular panels. Conforming to standards IEC/EN , IEC/EN , NF C , VDE 0660
Characteristics Environment Rated insulation voltage (Ui) Conforming to IEC/EN 60947-1, V 690 IEC/EN 60947-4-1, VDE 0110 gr C, CSA - n 14, UL 508.1 Conforming to standards IEC/EN 60947-1, IEC/EN 60947-4-1,
More informationK50F003UP cam changeover switch - 3-pole A - screw mounting
Characteristics cam changeover switch - 3-pole - 60-50 A - screw mounting Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product
More informationK63F003UP cam changeover switch - 3-pole A - screw mounting
Characteristics cam changeover switch - 3-pole - 60-63 A - screw mounting Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product
More informationProtection components
Presentation, characteristics Presentation 1 2 3 motor circuit-breakers are 3-pole thermal-magnetic circuit-breakers standards IEC 60947-2 and IEC 60947-4-1. Connection These circuit-breakers are designed
More informationGeneral_technical_data Series
Indicator actuator 2 500 Hz: 5 g Pushbutton actuator Lens flat/level with front bezel: - Momentary max. 3 600/h - Maintain max. 1 800/h Lens flat/raised above front ring: - Momentary max. 3 600/h - Maintain
More informationXMLB300D2C11 pressure switch XMLB 300 bar - adjustable scale 2 thresholds - 1 C/O
Characteristics pressure switch XMLB 300 bar - adjustable scale 2 thresholds - 1 C/O Complementary Possible differential minimum at low setting Possible differential minimum at high setting Maximum permissible
More informationXMLB020A2S13 pressure switch XMLB 20 bar - adjustable scale 2 thresholds - 1 C/O
Characteristics pressure switch XMLB 20 bar - adjustable scale 2 thresholds - 1 C/O Main Range of product Product or component type Pressure sensor type Device short name Pressure sensor size Controlled
More informationTeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series
Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current
More informationOsiSense. XC Basic Limit Switches XCMN, XCKN, XCNT
OsiSense XC Basic Limit Switches XCMN, XCKN, XCNT Courtesy of Steven Engineering, Inc. - () - - sales@steveneng.com - www.stevenengineering.com Courtesy of Steven Engineering, Inc. - () - - sales@steveneng.com
More informationModular contactors and relays
pages /4 to / pages /8 and /9 pages /10 and /11 pages /12 and /13 Presentation and standards Presentation Designed for use in modular panels and enclosures, these contactors feature : i Easy installation
More informationXMLA002A2C11 pressure switch XMLA 2.5 bar - fixed scale 1 threshold - 1 C/O
Characteristics pressure switch XMLA 2.5 bar - fixed scale 1 threshold - 1 C/O Product availability : Non-Stock - Not normally stocked in distribution facility Main Range of product Product or component
More informationL1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel
Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.
More informationblocks Interconnection fuses &
22mm DIAMETER CONTROL SWITCHES Flush Push Buttons CCTTR p17 On/Off Push Button CCTTR0 p17 Arrow Buttons CCTTRA p17 Start/Stop Push Button Start/Stop CCTTRS p18 On/Off CCTTRO p18 40mm E-Stop Key Release
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-N Series Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N
More informationRSB1A160B7 interface plug-in relay - Zelio RSB - 1 C/O - 24 V AC - 16 A
Characteristics interface plug-in relay - Zelio RSB - 1 C/O - 24 V AC - 16 A Stock Code: Stock - Normally stocked in distribution facility Price*: 4.20 USD Complementary Shape of pin Jul 8, 2015 Main Commercial
More informationFL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
More informationPosition switches FD series
Position switches FD series Selection diagram 01 08 11 18 19 02 04 05 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fibber glass rod gasket sphere sphere 51 52 5 56 41 42 adjustable lever
More informationGV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features
Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator
More informationSOLID STATE BUZZER ABSOLUTE CONTROL
TM TEKMEC SOLID STATE BUZZER ABSOLUTE CONTROL TEKMEC TM PERFECTION C O M M I T M E N T PCMS M3111204IN (AN ISO 9001:2008 CERTIFIED COMPANY) CONTROLLING DEVICES SIGNALLING DEVICES Ø22.5MM CONTROL & SIGNALLING
More informationLK Position Switches TECHNICAL DATASHEET.
LK Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 60529 contact blocks available 46 actuators available Versions with stainless steel external parts Versions
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-NSeries Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N conforms
More informationPush buttons and Visual indicators
Push buttons and Visual indicators Catalogue PDE2587TCUK December 2014 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
More informationXCKP2145P16 limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - M16
Characteristics limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - M16 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 47.90 USD Main Range
More informationSwitches with manual reset
Switches with manual reset Selection diagram 01-W 02-W 05-W 0-W -W -H0W 16-W 16-H0W Ø mm roller Ø mm roller Ø mm roller Ø mm roller 0-W 1-W 51-W 52-W 5-W 55-W -W adjustable lever safety adjustable lever
More informationLC1F330M7 TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 330 A - coil 220 V AC
Product data sheet Characteristics LC1F330M7 TeSys F contactor - 3P (3 NO) - AC-3 -
More informationAF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals 25 to 55 A culus CE Application AF09... AF38 4-pole contactors are used for controlling power circuits up to 600 V AC and 240 V DC.
More informationFOOT SWITCHES
- 83 - FOOT SWITCHES PS... / PD... Foot Switches Double insulation - Plastic Casing IP65 Description Applications Foot switch operated machines such as: shearing machines, spinning machines, spinning lathers,
More information5 - Contactors. Mini-contactors type LC1 SKGC. TeSys LCp F contactors and reversing contactors
Contents 0 - Contactors Selection guides.............................................page /2 b General, selection of contactors....................... pages /16 k contactors and reversing contactors b
More informationPosition switches FR series
Position switches FR series Selection diagram 01 A1 08 14 01-7 0 A 05 A5 external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket 0 1 5 34 50 33
More informationGeneral_technical_data Series
Slow-make switching element Switching system The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The
More informationLC1F500FD TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 500 A - coil 110 V DC
Product datasheet Characteristics LC1F500FD TeSys F contactor - 3P (3 NO) - AC-3 -
More informationSafety switches for hinged doors
4C Safety switches for hinged doors Selection diagram CONTACT BLOCKS 18 7 9 20 overlapped 1NO+ FD FL FC 21 22 33 34 2NO+1NC 3NC CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More informationNPA-CP Pendant Control Station
NPA-CP Pendant Control Station Pendant station for direct control of industrial machines. Sturdy and handy, NPA-CP is specifically designed for heavy duty in industrial environments. FEATURES The cable
More informationNon-illuminated Push Buttons
Non-illuminated Push Buttons 3 Accessories for push buttons Lockout attachment Contact block kits Lens kits Wobblestick kit Push Button Cap Interchangeable, snap-in design Protective caps 9 colors: red,
More informationOiltight Switches & Pilot Devices
Oiltight Switches & Pilot Devices HW Series 22mm IEC Style Global Pushbuttons Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Key features include: Locking
More informationSafety switches for hinged doors
4 Safety switches for hinged doors Selection diagram FR FM FX FZ FK 5 18 7 9 snap action overlapped CONTACT BLOCKS 20 21 22 33 34 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland
More informationXMLA160D2S11 pressure switch XMLA 160 bar - fixed scale 1 threshold - 1 C/O
Characteristics pressure switch XMLA 160 bar - fixed scale 1 threshold - 1 C/O Product availability : Stock - Normally stocked in distribution facility Main Range of product Product or component type Pressure
More informationNPA-CP. Pendant control station OPTIONS FEATURES CERTIFICATIONS
Pendant control station NPA-CP Pendant station for direct control of industrial machines. Sturdy and handy, NPA-CP is speciically designed for heavy duty in industrial environments. FEATURES The cable
More informationLC1F630F7 TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 630 A - coil 110 V AC
Product datasheet Characteristics LC1F630F7 TeSys F contactor - 3P (3 NO) - AC-3 -
More informationF E - Electromagnetic Safety Switch With Separated Actuator. 1 Code Construction. Casing: P: Plastic casing
Electromagnetic Safety Switch With Separated 1 Code Construction F E - Casing: P: Plastic casing Cable inlet: 5: 3 x (M20x1) Type of FEP: E: Electrical block ( b with excited ) M: Mechanical block ( b
More informationTechnical data. Standards: IEC/EN ; EN ISO ; EN 1088; BG-GS-ET-19
1 echnical data echnical data, 1 0 3 1 104 7 90 Interlock with protection against incorrect locking hermoplastic enclosure contacts Manual release, emergency exit or emergency release Long life Double
More informationSFS-UFS Single Foot Switches
SFS-UFS Single Foot Switches Technopolymer housing, shock proof Protection degree IP53 or IP65 13 contact blocks available Various auxiliary devices available UFS Series SFS Series Options & Ordering Codes
More informationSolenoid interlocks AZM 190 range. 128 Schmersal ,3 4,5 M20 17,5 23,5
2.19 AZM 19 range 13 44 32 2,3 3 1 Features Voltage variants Approvals Thermoplastic enclosure Manual / Emergency release Long life Actuation on de-energisation or energisation Slim design, particularly
More informationPosition switches FR series
Position switches FR series Selection diagram 0 A 08 0-0 A A 0 A external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket external rubber gasket
More informationCTX 3 Control relays Cat. N (s) : /06/09..14/16/19..24/26/29
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 CTX 3 Control relays Cat. N (s) : 4 168 00..04/06/09..14/16/19..24/26/29 CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3.
More informationRSC09 RSC16 RSC22 RSC38 RSC43 RSC63 RSC-AUX
IEC-Contactor RSC 1 Features Rated operational current 9 63 (C-3) Coil voltages C 24, 230V 3 main contacts and auxiliary contact Extendable with auxiliary contact block Mounting position any 2 Description
More informationContact gap 7 mm (norm >5.5 mm) ÿ IN ENCLOSURE. ÿ WITH CLUTCH DRIVE
Switch disconnectors A modular and flexible range Contact gap 7 mm (norm 5.5 mm) Reversible terminal feature ÿ IN ENCLOSURE - Degree of protection: up to IP 66 - For 25A to 100A size switches (see Ithe
More informationRUMC22F7 universal plug-in relay - Zelio RUM - 2 C/O V AC - 10 A - with LED
Characteristics universal plug-in relay - Zelio RUM - 2 C/O - 120 V AC - 10 A - with LED Product availability : Stock - Normally stocked in distribution facility Price* : 13.79 USD Main Range of product
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
Safety Interlock Switches D4S-N D4SN For full product information, visit www.sti.com. Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page. Slim Safety Door Switches with
More informationPrewired position switches FF series
2 Prewired position switches FF series Distributed buy Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable
More informationMiniaturized limit switches
Miniaturized limit switches Selection diagram Actuators 04 0 06 Thermoplastic Bodies M3 Contact blocks NONC 1NO+1NC snap action Cable entry With screw 290 GENERAL CATALOGUE miniaturized limit switches
More informationScrew limit switches XRBA and XR2. Catalogue
XRBA and XR2 Catalogue Contents XRBA and XR2 Selection guide.............................................. page 2 for standard duty: XRBA Presentation.............................................. page
More informationGeneral_technical_data Series
Actuator with snap-action switching element Switching system Self-cleaning, double-break snap-action switching system with contact opening width 2 x 0.5 mm (switch with small contact opening width as per
More informationPUSHBUTTON SWITCHES. electrical controls 1/5 SPECIFICATIONS: TECHNICAL DATA CONTACT BLOCKS LIGHTING BLOCKS
SPECIFICATIONS: For panels with Ø22mm drilling and thickness up to 6mm Modern and functional design Robust and compact construction NF contact with positive rupture KEMA-KEUR certified contact s electrical
More informationSolenoid interlocks AZM 170 range. 98 Schmersal 22 8,2 60. ø4,2. ø Pg 11
2.4 AZM 170 range Features Thermoplastic enclosure Compact design Manual release Long life Double insulated X High holding force 1,000 N N latching force Cut clamp termination Actuation on de-energisation
More informationRAAS NOTE: Pricing and specifications subject to change without notice.
C & S CONTROL STATIONS - CUSTOMER ASSEMBLED PRODUCT CONTROL STATIONS - DESIGN FEATURES REFERENCE STANDARD IEC 947-5-, EN 60947-5-, IEC 337-, UL 508, CSA C-22-2 n 4 APPROVAL UL, cul, CSA PROTECTION DEGREE
More informationLC1F400E7. Main. Product or component type Device short name. Utilisation category. Poles description Pole contact composition
Product datasheet Characteristics LC1F400E7 Complementary [Uimp] rated impulse withstand voltage Overvoltage category [Ith] conventional free air thermal current Main Range Product name Product or component
More informationSolenoid interlocks AZM 161 range Schmersal. a 5,5. Pg11/M16x1,5
.1 AZM 11 range Features Thermoplastic enclosure Manual and emergency release Long life Double insulated X High holding force, N N latching force Wiring compartment Actuation on de-energisation or energisation
More informationNPA-CP. Pendant control station. OPtiONs. FeAtures. CertiFiCAtiONs
Pendant control station NPA-CP Pendant station for direct control of industrial machines. Sturdy and handy, NPA-CP is speciically designed for heavy duty in industrial environments. FeAtures The cable
More informationVistop TM isolating switches 63 to 160A
DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary
More informationCI-TI Contactors and motor starters Types CI 61 - CI 98
Data sheet CI-TI Contactors and motor starters s CI 6 - CI 98 Contactors CI 6, CI 7, CI 86 and CI 98 switch powers of up to 0 kw, 7 kw, 45 kw and 55 kw respectively under 80 V - loads. Accessories include
More informationLimit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66 Double Insulation (for thermoplastic type) High mechanical resistant Degree of protection IP65 (thermoplastic) IP66
More informationAF09... AF30 3-pole Contactors up to 25 HP / 600 VAC
AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24
More informationPre wired limit switches
Pre wired limit switches Selection diagram Actuators A B B 9 BL Thermoplastic Bodies E7 I s NO+NC snap action NO+NC slow action Cable entry 4 or 5 pole PVC sheath cable (standard) M connector AMP connector
More informationSingle foot switches PX and PA series
A Single foot switches PX and PA series Selection diagram CARRYING ROD See page /10 ADDITIONAL METAL PROTECTION OPEN PROTECTIONS CLOSED PROTECTIONS PA PA 2 CONTACT BLOCKS COMBINATIONS 01 02 1NO+1NC snap
More informationHarmony 9001K/SK/KX 30 mm push buttons
Introduction Harmony 00K/SK/KX 0 mm push buttons Introduction Schneider Electric s Harmony 00 0 mm push buttons, pilot lights, selector switches and mushroom head operators provide robust and reliable
More informationSafety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 ACTUATORS VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 FR FX FK FW 5 6 7 11 1 14 NC NC slow action slow
More informationAF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
More informationSafety rope switch with reset for emergency stop
Safety rope switch with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+,, FP FD FL FC 22 33 34,, CONDUIT ENTRIES Threaded conduit entries (standard) With
More informationPosition switches FC series
A Position switches FC series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere 6 adjustable lever safety adjustable lever
More informationRPF2AF7 power relay plug-in - Zelio RPF - 2 NO V AC - 30 A
Characteristics power relay plug-in - Zelio RPF - 2 NO - 120 V AC - 30 A Product availability : Stock - Normally stocked in distribution facility Price* : 12.69 USD Main Range of product Series name Product
More informationLR-LX-LK-LW Safety Switches with separate actuator
LR-LX-LK-LW Safety Switches with separate actuator Technopolymer housing, from one to three conduit entries Protection degree IP67 15 contact blocks available 8 stainless steel actuators available Versions
More informationLimit Switches - Safety Type Plastic Body IP65 and Metal Body IP66
Limit Switches - Safety Type Plastic Body IP65 and Metal Body IP66 Product Description They are developed in order to be used for following operations: For monitoring and protection of industrial machines,
More informationPendant control boxes. Adaptability Modularity Safety Reliability
Offer Adaptability Modularity Safety Reliability Creating Control and Signalling Solutions for Harsh Environments The range of possibilities : A very wide range - The versions presented in this catalogue
More information