XACA871 pendant control station XAC-A - 8 pushbuttons

Size: px

Start display at page:

Download "XACA871 pendant control station XAC-A - 8 pushbuttons"

Janis Lawrence
6 years ago
Views:

Characteristics pendant control station XAC-A - 8 pushbuttons Complementary Control station colour Connections - terminals Mechanical durability Cable entry Contact code designation [Ithe]

1 Characteristics pendant control station XAC-A - 8 pushbuttons Complementary Control station colour Connections - terminals Mechanical durability Cable entry Contact code designation [Ithe] conventional enclosed thermal current Main Range of product Product or component type Control station name Control station type Enclosure material Electrical circuit type Enclosure type Control station application Control station composition Control button type Contact block name Mechanical interlocking Yellow Harmony XAC Pendant control station XACA Double insulated Polypropylene Control circuit Complete ready for use Control of single speed hoist motor 8 pushbuttons Third pushbutton 1 NO right, slow Sixth pushbutton 1 NO reverse, slow Seventh pushbutton 1 NO I Second pushbutton 1 NO lower, slow Fourth pushbutton 1 NO left, slow First pushbutton 1 NO raise, slow Fifth pushbutton 1 NO forward slow Eighth pusbutton 1 NC O ZB2BE102 for eighth direction ZB2BE101 for each direction (except eighth) With mechanical interlocking between pairs Screw clamp terminals, connection capacity: 1 x x 1.5 mm² with cable end Screw clamp terminals, connection capacity: 1 x x 2.5 mm² without cable end cycles Rubber sleeve with stepped entry, cable outer diameter: mm Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC appendix A Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC appendix A A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC appendix A A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC appendix A 10 A [Ui] rated insulation voltage 600 V (degree of pollution: 3) [Uimp] rated impulse withstand voltage 6 kv conforming to IEC Contacts operation Resistance across terminals Operating force Short circuit protection Rated operational power in W Terminals description ISO n 1 Terminals description ISO n 2 Terminal identifier Product weight Slow-break <= 25 mohm 8 N for eighth pushbutton 10 N for pushbutton 10 A fuse protection by cartridge fuse type gg 65 W DC-13 for cycles, operating rate = 60 cyc/mn at 24 V, load factor 48 W DC-13 for cycles, operating rate = 60 cyc/mn at 48 V, load factor 40 W DC-13 for cycles, operating rate = 60 cyc/mn at 120 V, load factor (13-14)NO (11-12)NC (11-12)NC (13-14)NO 0.94 kg The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Mar 9,

2 Environment Standards CSA C22-2 No 14 EN/IEC EN/IEC UL 508 Product certifications Protective treatment CCC GOST Ambient air temperature for operation C Ambient air temperature for storage C Vibration resistance 15 gn (f = Hz) conforming to IEC Shock resistance 100 gn conforming to IEC Class of protection against electric shock Class II conforming to IEC IP degree of protection IP65 conforming to IEC IK degree of protection IK08 conforming to EN TH 2

Dimensions Drawings Dimensions Below drawing shows a product with 6 cut-outs. Select the number of cut-outs according to the product characteristics in order to get b, b1 and c dimensions.

3 Dimensions Drawings Dimensions Below drawing shows a product with 6 cut-outs. Select the number of cut-outs according to the product characteristics in order to get b, b1 and c dimensions. (1) For 2 and 3-way XAC A stations. (2) For 4 to 8-way XAC A stations. (3) With trigger action Emergency stop head operator (4) Internal ø Dimensions in mm Number of cut-outs b b c Dimensions in in. Number of cut-outs b b c

4 Connections and Schema Control of Single-Speed Reversing Motor With ZBE2BE101 + ZB2BE102 contacts blocks, to be ordered separately 4

Performance Curves Rated Operational Power AC Supply 50/60 Hz Inductive Circuit Operating rate: 3600 operating cycles/hour. Load factor: 0.5. Millions of operating cycles, AC-15 utilization category Ithe (A) Thermal current Current DC Supply Operating rate: 3600 operating cycles/hour.

5 Performance Curves Rated Operational Power AC Supply 50/60 Hz Inductive Circuit Operating rate: 3600 operating cycles/hour. Load factor: 0.5. Millions of operating cycles, AC-15 utilization category Ithe (A) Thermal current Current DC Supply Operating rate: 3600 operating cycles/hour. Load factor: 0.5. Power broken in W for 1 million operating cycles, DC-13 utilization category Voltage V Inductive circuit W

XACA871 pendant control station XAC-A - 8 pushbuttons

XACA871 pendant control station XAC-A - 8 pushbuttons Characteristics pendant control station XAC-A - 8 pushbuttons Complementary Control station colour Connections - terminals Mechanical durability Cable entry Contact code designation [Ithe] conventional