PARTS LIST MANUAL. Portable Air Compressor 375, 375H, 400HH, 425, 425H. Tier 4 Final Caterpillar WARRANTY NOTICE

Transcription

1 PARTS LIST MANUAL Portable Air Compressor 375, 375H, 400HH, 425, 425H Tier 4 Final Caterpillar SAFETY WARNING Users are required to read the entire User Manual before handling or using the product. WARRANTY NOTICE Failure to follow the instructions and procedures in this manual, or misuse of this equipment, will void its warranty. PART NUMBER: The information in this manual is current as of its publication date and applies to compressor models indicated on this cover with serial number: and all subsequent serial numbers. Publication date: 06/27/2016 Copyright 2016 Sullair, LLC. All rights reserved. Subject to EAR, ECCN EAR99 and related export control restrictions.

2 Air Care Seminar Training Sullair Air Care Seminars are courses that provide hands-on instruction for the proper operation, maintenance, and servicing of Sullair products. Individual seminars on Portable compressors are offered at regular intervals throughout the year at Sullair s training facility located in Michigan City, Indiana. Instruction includes training on the function and installation of Sullair service parts, troubleshooting common faults and malfunctions, and actual equipment operation. These seminars are recommended for maintenance, contractor maintenance, and service personnel. For detailed course outlines, schedule, and cost information contact: Sullair Training Department SULLAIR or (ext. 5623) training@sullair.com - Or Write - Sullair, LLC 3700 E. Michigan Blvd. Michigan City, IN Attn: Service Training Department. Subject to EAR, ECCN EAR99 and related export control restrictions.

3 375, 375H, 400HH, 425, 425H T4F Parts List Manual Table of Contents Table of Contents 1.1 Procedure for ordering parts Recommended spare parts list Engine and parts (375, 375H & 425) Engine and parts (400HH & 425H) Air inlet system (375, 375H & 425) Air inlet system (400HH & 425H) Air inlet system restriction indicator (option) Exhaust system Cooling system (375, 375H & 425) Cooling system (400HH & 425H) Cooler pack sub-assembly Discharge system, standard (375 & 425) Discharge system, standard (375H & 425H) Discharge system, standard (400HH) Discharge system, aftercooled and filtered (375 & 425) Discharge system, aftercooled and filtered (375H & 425H) Discharge system, aftercooled and filtered (400HH) Receiver tank sub-assembly (375, 375H, 425 & 425H) Receiver tank sub-assembly (400HH) Aftercooler sub-assembly Orifice control sub-assembly Regulator and blowdown valve sub-assembly (375 & 425) Regulator and blowdown valve sub-assembly (375H, 400HH & 425H) Fuel system Electrical & control system E-stop sub-assembly Mounting panels sub-assembly Battery mounting panel sub-assembly Battery mount sub-assembly, 12V Canopy and parts Frame assembly, DPQ Frame assembly, DLQ Parking brakes sub-assembly Instrument panel and parts Instrument panel breakdown (375 & 425) Instrument panel breakdown (375H, 400HH & 425H) Subject to EAR, ECCN EAR99 and related export control restrictions. i

4 375, 375H, 400HH, 425, 425H T4F Parts List Manual Table of Contents 1.37 Dry side relief valves, standard (375, 375H & 425) Dry side relief valves, standard (400HH & 425H) Dry side relief valves, aftercooled and filtered (375, 375H & 425) Dry side relief valves, aftercooled and filtered (400HH & 425H) Service valve sub-assembly Hose reel, single (option) Hose reels, dual (option) Decal locations Subject to EAR, ECCN EAR99 and related export control restrictions. ii

5 1.1 Procedure for ordering parts You should order parts from the nearest authorized Sullair representative or the representative from whom the compressor was purchased. If for any reason you cannot obtain parts in this manner, contact the factory directly at the address, phone number, or website listed below. Sullair North America Operations 3700 East Michigan Boulevard Michigan City, IN USA SULLAIR (USA only) (non-usa) When ordering parts, always indicate the serial number of the compressor. You can get the serial number from the Bill of Lading for the compressor or from the Serial Number Plate located on the compressor (see Figure 1-1: Serial number plate location). The genuine Sullair service parts listed meet or exceed the demands of this compressor. Use of replacement parts other than those approved by Sullair will void the Sullair warranties specific to this product and may lead to hazardous conditions over which Sullair has no control. Such conditions include, but are not limited to, bodily injury and compressor failure. Figure 1-1: Serial number plate location Subject to EAR, ECCN EAR99 and related export control restrictions. 1

6 1.2 Recommended spare parts list Part Number Qty Description Notes Element for air filter assembly (primary) Element for air filter assembly (secondary) Valve, evacuator for air filters Rubber debris trap at bottom of air filters Element for main compressor fluid filter Element for air/fluid separator Element for 1 st stage discharge filter (aftercooled) Element for 2 nd stage discharge filter (aftercooled) Element for Caterpillar engine oil filter Element for Caterpillar primary fuel filter Element for Caterpillar final fuel filter Element for PCV filter Fuel filter (inline) O-ring for receiver tank plug Parts included in kit: Maintenance kit, initial 50 hour Parts included in kit: Maintenance kit, 250 hour Subject to EAR, ECCN EAR99 and related export control restrictions. 2

7 1.2 Recommended spare parts list Part Number Qty Description Notes Parts included in kit: Maintenance kit, 1500 hour Repair kit for thermal valve on 375, 375H, 400HH, 425, 425H T4F Repair kit for flange SAE O-ring Repair kit for pressure regulator valve Repair kit for regulator/blowdown valve manifold Repair kit for inlet valve Repair kit for return line strainer Repair kit for minimum pressure check valve Repair kit for shaft seal Coupling repair kit for Caterpillar 375 standard pressure machines Coupling repair kit for Caterpillar 375 dual pressure machines ( H, HH ) Coolant surge bottle assembly Single Axle Controller master gauge psi Requires serial number specific programming Sullair AWF (5 gallons/18.9 liters) Sullair AWF (55 gallons/208 liters) Manual, CIMA safety Subject to EAR, ECCN EAR99 and related export control restrictions. 3

8 1.3 Engine and parts (375, 375H & 425) R07 Subject to EAR, ECCN EAR99 and related export control restrictions. 4

9 1.3 Engine and parts (375, 375H & 425) Key Part number Qty Description Notes BUSHING,TPR LOCK # /16 * KEY, SHAFT H375 ** ELBOW,45 SAE X ORFS 1.00" WASHER,SNUBBING VIB MT MOUNT, VIB UNIVERSAL W/PLATE WASHER,SNUBBING 375 VIBRATION MT COUPLING,ASSY RINGFEDDER AC-T4.1 ** VALVE,ENG OIL DRAIN 3/4-16 UNF COUPLING,DRIVE 375C 375 CAT & JD * FAN,32" 30 DEG 375D SPACER,FAN 5.00LG 375D CAT SUPPORT,BRACKET ENG FRNT LH 375D SUPPORT,BRACKET ENG FRNT RH 375D SCREW,SOCKET ISO M12 X 30MM PC MANIFOLD,REMOTE FILTER HOSE,ASSY MP 7/8 ID 22" OAL HOSE,ASSY 7/8 "ID 18" OAL ELBOW,45M STR THD/ORFS 1X3/ ELEMENT,ENG OIL FLTR CAT VALVE,OIL SAMPLING COVER,OIL SAMPLING VALVE GASKET, 1/32 X 5 1/4ODX4 1/8ID ADAPTER, ENG-COMPR 375 JD SPACER, COUPLING 1.93 X.40 * KEY, SHAFT 375 * VALVE,AIR INLET 4" 375DPQ BUSHING, TAPER-LOC ID ** CAPSCREW,HEX 8.8 M8 X 160MM PLT Subject to EAR, ECCN EAR99 and related export control restrictions. 5

10 1.3 Engine and parts (375, 375H & 425) Key Part number Qty Description Notes CAPSCREW,HEX 8.8 M10 X 35MM PLT CAPSCREW,HEX 8.8 M10 X 40MM PLT CAPSCREW,HEX GR5 3/8-24 X 1" * CAPSCREW,HEX GR5 3/8-24 X 1 1/2" ** CAPSCREW,HEX GR5 1/2-13 X 1" CAPSCREW,HEX GR5 1/2-13 X 1 1/2" CAPSCREW,HEX GR5 1/2-13 X 3 3/4" CAPSCREW,HEX GR5 5/8-11 X 3 1/4" SCREW, HX SER WASH 5/16 X 1" WASHER, SPRLOCK H.CLR 1/2"PLT WASHER,SPRLOCK REG PLTD 3/8 * WASHER, SPRLOCK REG PLTD 1/2" WASHER, SPRLOCK REG PLTD 5/8" WASHER, SPRLOCK METRIC M WASHER, SPRLOCK METRIC M WASHER, ISO HV 45 CONSULT FACTORY 1 ENGINE,DIESEL CA D 46 SEE TABLE 1 UNIT 16 SERIES 375 Drawing notes A1 TO FRAME A2 TO SUPPORT BRACKET A3 MAKE SURE THREADS ARE CLEAN AND FREE OF OIL. APPLY LOCTITE 242 TO THREADS OF SCREW AND TORQUE TO 77 FT-LBS. A4 INSTALL TAPER LOCK PER MANUFACTURER'S INSTRUCTIONS PROVIDED WITH PART. SCREWS ARE SUPPLIED WITH TAPER LOCK INSTALL KEY AS SHOWN IN VIEW "B". A5 MAINTAIN MIN. GAP OF.35" TO DEF TANK A6 INSTALL TWO BOLTS TO FORWARD ENGINE MOUNTING HOLES. APPLY LOCTITE 242 TO THREADS AND TORQUE TO 110 FT-LBS. * 375 MACHINES ONLY ** 375H AND 425H MACHINES ONLY Subject to EAR, ECCN EAR99 and related export control restrictions. 6

11 1.3 Engine and parts (375, 375H & 425) Engine & compressor Model Engine description Compressor P/N HP H 122 HP HP Subject to EAR, ECCN EAR99 and related export control restrictions. 7

12 1.4 Engine and parts (400HH & 425H) R02 Subject to EAR, ECCN EAR99 and related export control restrictions. 8

13 1.4 Engine and parts (400HH & 425H) Key Part number Qty Description Notes KEY, SHAFT H ELBOW,45 SAE X ORFS 1.00" WASHER,SNUBBING VIB MT MOUNT,VIB UNIVERSAL W/PLATE WASHER,SNUBBING 375 VIBRATION MT COUPLING,ASSY RINGFEDDER AC-T SPACER,FAN 5.00LG 375D CAT SUPPORT,BRACKET ENG FRNT LH 375D SUPPORT,BRACKET ENG FRNT RH 375D SCREW,SOCKET ISO M12 X 30MM PC MANIFOLD,REMOTE FILTER HOSE,ASSY MP 7/8 ID 22" OAL HOSE,ASSY 7/8 "ID 18" OAL ELBOW,45M STR THD/ORFS 1X3/ ELEMENT,ENG OIL FLTR CAT VALVE,OIL SAMPLING COVER,OIL SAMPLING VALVE FAN,32" DEG 375D (400HH) VALVE,ENG OIL DRAIN 3/4-16 UNF GASKET, 1/32 X 5 1/4ODX4 1/8ID HOUSING,( ) VALVE,AIR INLET 4" 375DPQ BUSHING, TAPER-LOC ID CAPSCREW,HEX 8.8 M8 X 160MM PLT CAPSCREW,HEX 8.8 M10 X 35MM PLT CAPSCREW,HEX GR5 3/8-24 X 1 1/2" CAPSCREW,HEX GR5 1/2-13 X 1" Subject to EAR, ECCN EAR99 and related export control restrictions. 9

14 1.4 Engine and parts (400HH & 425H) Key Part number Qty Description Notes CAPSCREW,HEX GR5 1/2-13 X 1 1/2" CAPSCREW,HEX GR5 1/2-13 X 3 3/4" CAPSCREW,HEX GR5 5/8-11 X 3 1/4" SCREW, HX SER WASH 5/16 X 1" WASHER, SPRLOCK H.CLR 1/2"PLT WASHER, SPRLOCK REG PLTD 1/2" WASHER, SPRLOCK REG PLTD 5/8" WASHER, SPRLOCK METRIC M WASHER, SPRLOCK METRIC M WASHER, ISO HV COMPRESSOR & PARTS,DXX163167E203S55AD 39 CONSULT FACTORY 1 ENGINE,DIESEL CA HP T4F Drawing notes A1 A2 A3 A4 A5 A6 A7 TO FRAME TO SUPPORT BRACKET TO LIFTBAIL MAKE SURE THREADS ARE CLEAN AND FREE OF OIL. APPLY LOCTITE 242 TO THREADS OF SCREW AND TORQUE TO 77 FT-LBS. INSTALL TWO BOLTS TO FORWARD ENGINE MOUNTING HOLES. APPLY LOCTITE 242 TO THREADS AND TORQUE TO 110 FT-LBS. INSTALL TAPER LOCK PER MANUFACTURER'S INSTRUCTIONS PROVIDED WITH PART. SCREWS ARE SUPPLIED WITH TAPER LOCK INSTALL KEY AS SHOWN IN VIEW "B". MAINTAIN MIN. GAP OF.35" TO DEF TANK Subject to EAR, ECCN EAR99 and related export control restrictions. 10

15 Notes: Subject to EAR, ECCN EAR99 and related export control restrictions. 11

16 1.5 Air inlet system (375, 375H & 425) R03 Subject to EAR, ECCN EAR99 and related export control restrictions. 12

17 1.5 Air inlet system (375, 375H & 425) Key Part number Qty Description Notes CLAMP, T-BOLT SS BAND 4.50" ID ELBOW,90M 5/16"TUBE X 1/8"NPT CLAMP, T-BOLT SS BAND 3.75" ID ELBOW, RED 90 4" X 5" FILTER,AIR ENGINE INLET 600SA SENSOR,ENGINE AIR INTAKE TIER ELBOW,RUBBER REDUCER TUBE,STEEL 4" 375 AIRINLET ELBOW,RUB 90DEG 5"ID SUPPORT,BRACKET AIR FILTER 375D CA SCREW,HEX SER WASHER M8 X 16MM INDICATOR,RESTRICTION 30"H2O CLAMP, T-BOLT SS BAND 5.50" ID O-RING,VITON 5/8 X 3/32" SCREW, HX SER WASH 5/16 X 3/4" BULKHEAD, PIPE 1/8" NPT Drawing notes A1 TO TURBO INLET A2 TO COMPRESSOR INLET A3 TO LIFTING BAIL Subject to EAR, ECCN EAR99 and related export control restrictions. 13

18 1.6 Air inlet system (400HH & 425H) R04 Subject to EAR, ECCN EAR99 and related export control restrictions. 14

19 1.6 Air inlet system (400HH & 425H) Key Part number Qty Description Notes CLAMP, T-BOLT SS BAND 4.50" ID ELBOW,90M 5/16"TUBE X 1/8"NPT CLAMP, T-BOLT SS BAND 3.25" I.D ELBOW, RED 90 4" X 5" FILTER,AIR ENGINE INLET 600SA SENSOR,ENGINE AIR INTAKE TIER ELBOW,RUB 90DEG 5"ID SUPPORT,BRACKET AIR FILTER 375D CA SCREW,HEX SER WASHER M8 X 16MM ELBOW,RUBBER REDUCER 2.5"-4" TUBE,STEEL 4" 375 AIRINLET INDICATOR,RESTRICTION 30"H2O CLAMP, T-BOLT SS BAND 5.50" ID O-RING,VITON 5/8 X 3/32" SCREW, HX SER WASH 5/16 X 3/4" BULKHEAD, PIPE 1/8" NPT Drawing notes A1 TO TURBO INLET A2 TO COMPRESSOR INLET A3 TO LIFTING BAIL Subject to EAR, ECCN EAR99 and related export control restrictions. 15

20 1.7 Air inlet system restriction indicator (option) R01 Subject to EAR, ECCN EAR99 and related export control restrictions. 16

21 1.7 Air inlet system restriction indicator (option) Key Part number Qty Description Notes INDICATOR, RESTRICTION 20"H TEE, FEMALE PIPE BRASS 1/8" NIPPLE, PIP-HX BRASS 1/8 X 1/8 Subject to EAR, ECCN EAR99 and related export control restrictions. 17

22 1.8 Exhaust system R09 (sh1) Subject to EAR, ECCN EAR99 and related export control restrictions. 18

23 1.8 Exhaust system R09 (sh2) Subject to EAR, ECCN EAR99 and related export control restrictions. 19

24 1.8 Exhaust system R09 (sh3) Subject to EAR, ECCN EAR99 and related export control restrictions. 20

25 1.8 Exhaust system R09 (sh4) Subject to EAR, ECCN EAR99 and related export control restrictions. 21

26 1.8 Exhaust system Key Part number Qty Description Notes CLAMP,WRM DRV TYP M SAE TANK,DEF 375D VERTICAL CAT CONTROL,ECU 375D DEF SUPPORT,BRACKET ECU 375D DEF CTL VALVE,DEF COOLANT VALVE SUPPORT,DEF LINE BRACKET PAD,DEF TANK CAT 375D SUPPORT,BRACKET DEF CAT 375D ELBOW,5/8 HOSE X M CAP,EXHAUST RAIN 3" ISOLATOR,VIBRATION EXHAUST HANGER 375D PIPE,EXHAUST OUTLET 375D CAT SENSOR,NOX CAT 375D TAIL HOSE,DEF SUCT TO PUMP CAT 375D PLATE,EXH SENSOR CLIP CAT 375D SENSOR,NH3 CAT 375D SENSOR,NOX CAT 375D TURBO CONTROL,SNSR NH3 CAT 375D STRAP,TANK DEF CAT 375D CONTROL,EXH ID MODULE CAT 375D BOLT,CARRIAGE CP 5/16 X HOSE,DEF TRANSFER 3/8" ID ELBOW,PIPE 90M 1/2 X 5/8 HOSE CLAMP,HOSE O.D ELBOW,FM STR THD 9/16 SS CLAMP,DOUBLE HOSE 7/8" HOSE,DEF PUMP TO INJ CAT 375D Subject to EAR, ECCN EAR99 and related export control restrictions. 22

27 1.8 Exhaust system Key Part number Qty Description Notes HOSE,DEF INJ TO TNK CAT 375D WRAP,SPIRAL HOSE 1.88 ID BLK SUPPORT,NOX SENSOR CAT VALVE,DEF DRAIN SS CLAMP, EXHAUST 3" CLAMP, HOSE O.D CLAMP, HOSE O.D CLAMP, HOSE O.D CLAMP, HOSE O.D NUT, HEX PLTD 5/ NUT, HEX FLGD PLTD 5/ NUT, HEX LOCKING PLTD 5/ SCREW, HX SER WASH 1/4 X 3/4" SCREW, HX SER WASH 5/16 X 3/4" SCREW, HX SER WASH 5/16X1 1/4" SCREW,HEX SERWASHER 5/16X 2 1/ WASHER, PL-B WIDE PLTD 5/16" HOSE, HEATER 5/8" (FT) WRAP, TIE NYLON TF4-8X WRAP, TIE NYLON TY27MX WASHER,EXTRA THICK PLTD 5/16" SCREW, HEX SER WASHER M10 X * GROMMET,RUB 1.75 DIA.19MTL TH * CLAMP, HOSE O.D * WRAP,TIE 2" MAX BUNDLE SS 53 SEE TABLE 1 PLATE, EXT CVR 375D Subject to EAR, ECCN EAR99 and related export control restrictions. 23

28 1.8 Exhaust system Key Part number Qty Description Notes Drawing notes A1 TO SKIRT A2 TO OVERFILL TANK BRACKET A3 TO FAN GAURD A4 TO LIFT BAIL A5 TO CANOPY A6 TO AIR FILTER BRACKET A7 TO FRAME A8 USE EXISTING SCREW A9 WRAP TO DEF HOSE A10 TO COOLING SYSTEM HOSE A11 GRAY COLOR A12 BLACK COLOR A13 TO LIFTBAIL SLOT AA DEF LINE SUPPORT (DEF INJ. TO TANK) AB DEF LINE SUPPORT (DEF SUCT. TO PUMP) AC TO SUPT, DEF LINE BRACKET * REFER TABLE FOR QTY Key Part number Qty 115/122 hp Qty 157 hp Subject to EAR, ECCN EAR99 and related export control restrictions. 24

29 1.8 Exhaust system Cover plate Model Description Part number Color 375, 375H, 425 CAT 115/ HH, 425H CAT BLACK MILL BLACK MILL Subject to EAR, ECCN EAR99 and related export control restrictions. 25

30 1.9 Cooling system (375, 375H & 425) R07 (sh1) Subject to EAR, ECCN EAR99 and related export control restrictions. 26

31 1.9 Cooling system (375, 375H & 425) R07 (sh2) Subject to EAR, ECCN EAR99 and related export control restrictions. 27

32 1.9 Cooling system (375, 375H & 425) R07 (sh3) Subject to EAR, ECCN EAR99 and related export control restrictions. 28

33 1.9 Cooling system (375, 375H & 425) Key Part number Qty Description Notes FILTER,FL 1 5/8 SAE STR THRD CON SEAL,U-CUP VITON THERM VLV HOUSING,THRMVLV 1-7/8"SAE 4 PORT CLAMP, T-BOLT SS BAND 2.25" ID ADAPTER,CAC 2"ID X 5" LONG ELBOW,CAC 90 DEG 2" ID CLAMP, HOSE O.D CLAMP, T-BOLT SS BAND 2.88" ID HOSE, RAD 2.5 X 2.0 ID CAP, DE-AERATION TANK 600SA TANK,COOLANT SURGE 375IT HOSE,ASSY MP 7/8ID HOSE,ASSY MP 7/8ID HOSE,ASSY MP 7/8ID HOSE,RAD UPPER 375D CAT HOSE,RAD LOWER 375D CAT TUBE,CAC 375D CAT GUARD,FAN 375D CS SUPPORT,BRACE UPR CAC TUBE 375D CAT SUPPORT,BRACKET OVERFL TNK 375D CAT SUPPORT,BRACKET OIL MANIFOLD 375D TUBE,STEEL 1.25OD OIL CLR 375D TUBE,STEEL 1.25OD OIL CLR 375D HOSE,ASSY MP 7/8ID ELBOW,MALE FITTING GUARD,FAN 375D SS SUPPORT,BRACKET DE-AER TANK 375D Subject to EAR, ECCN EAR99 and related export control restrictions. 29

34 1.9 Cooling system (375, 375H & 425) Key Part number Qty Description Notes WRAP,TIE NYLON TY242MX TUBE,CAC LOWER 375D CAT CONNECTOR,STR THD/ORFS 1-5/16X1-1/ CLAMP,WRM DRV 1-3/16-1-3/ SUPPORT,BRACKET THERMAL VALVE HOSE,ASSY, MP 7/8 ID X 43 OAL 34 SEE NOTE 1 SUB ASSEMBLY,MODULAR,CLR PACK 375D For parts breakdown, see SPACER,1-7/8 SAE L/O-RING GROOVE ADAPTER,1/4 NPT X 1/4 BSPP SHROUD,FAN 375D GROMMET,1.75 DIA DRAINLOCK, 1/4" CLAMP, HOSE 3" CLAMP, HOSE 3/8" ELEMENT, THERMAL VALVE 190DEG ELBOW, 5/16"H X 1/4"P PLUG,PIPE 1/4" 3000# STL NUT, HEX FLGD PLTD 3/ O-RING,VITON 2 1/2 X 3/ CAPSCREW,HEX 8.8M 8 X 16MM PLT CAPSCREW,FERRY HEAD 3/8-16 X 1 1/2" CAPSCREW,HEX GR5 1/2-13 X 1 1/ SCREW, HX SER WASH 5/16 X 3/4" SCREW, HX SER WASH 5/16 X 1" SCREW, HX SER WASH 3/8 X 1" WASHER,PL-B REG UNFIN 5/16" WASHER, SPRLOCK REG PLTD 1/2" Subject to EAR, ECCN EAR99 and related export control restrictions. 30

35 1.9 Cooling system (375, 375H & 425) Key Part number Qty Description Notes WASHER,PL-B REG PLTD 3/ HOSE, HEATER 1 1/4" (FT) HOSE, FUEL LINE 5/16" (FT) WASHER, ISO HV U-BOLT, 1/4 X 1 1/2 PIPE PLT REDUCER,STR THRD 1 1/4 X 1" VITON REDUCER,STR THRD 1 1/2 X 1 VITON REDUCER,STR THRD 1 1/2X1 1/4 VITON UNION,STRT THRD 1 5/ PLUG,STR THD HOL HX 9/ WASHER, NORD-LOCK PL 1/2" CONNECTOR,STR THD/ORFS 1 7/16 X 1" ELBOW,ST THD/ORFS 1 5/16 X 1 Drawing notes A1 ENGINE COOLANT OVERFLOW TO FRAME CONTAINMENT. A2 TO RECEIVER OIL PICK-UP PORT. A3 TO COMPRESSOR UNIT OIL INJECTION PORT. A4 TO ENGINE WATER PUMP/FILL PORT. A5 TO RADIATOR. A6 TO ENGINE THERMOSTAT. A7 TO ENGINE AIR INTAKE. A8 TO TURBOCHARGER. A9 TO LIFTING BAIL A10 TO FRAME Subject to EAR, ECCN EAR99 and related export control restrictions. 31

36 1.10 Cooling system (400HH & 425H) R07 (sh1) Subject to EAR, ECCN EAR99 and related export control restrictions. 32

37 1.10 Cooling system (400HH & 425H) R07 (sh2) Subject to EAR, ECCN EAR99 and related export control restrictions. 33

38 1.10 Cooling system (400HH & 425H) R07 (sh3) Subject to EAR, ECCN EAR99 and related export control restrictions. 34

39 1.10 Cooling system (400HH & 425H) Key Part number Qty Description Notes FILTER,FL 1 5/8 SAE STR THRD CON SEAL,U-CUP VITON THERM VLV HOUSING,THRMVLV 1-7/8"SAE 4 PORT CLAMP, T-BOLT SS BAND 2.25" ID ADAPTER,CAC 2"ID X 5" LONG ELBOW,CAC 90 DEG 2" ID CLAMP, HOSE O.D CLAMP, T-BOLT SS BAND 2.88" ID HOSE, RAD 2.5 X 2.0 ID CAP, DE-AERATION TANK 600SA TANK,COOLANT SURGE 375IT HOSE,ASSY MP 7/8ID HOSE,ASSY MP 7/8ID HOSE,ASSY MP 7/8ID HOSE,RAD UPPER 375D CAT HOSE,RAD LOWER 375D CAT TUBE,CAC 375D CAT HIGH HP GUARD,FAN 375D CS SUPPORT,BRACE UPR CAC TUBE 375D CAT SUPPORT,BRACKET OVERFL TNK 375D CAT SUPPORT,BRACKET OIL MANIFOLD 375D TUBE,STEEL 1.25OD OIL CLR 375D TUBE,STEEL 1.25OD OIL CLR 375D HOSE,ASSY MP 7/8ID ELBOW,MALE FITTING GUARD,FAN 375D SS SUPPORT,BRACKET DE-AER TANK 375D Subject to EAR, ECCN EAR99 and related export control restrictions. 35

40 1.10 Cooling system (400HH & 425H) Key Part number Qty Description Notes WRAP,TIE NYLON TY242MX TUBE,CAC LOWER 375D CAT CONNECTOR,STR THD/ORFS 1-5/16X1-1/ CLAMP,WRM DRV 1-3/16-1-3/ SUPPORT,BRACKET THERMAL VALVE HOSE,ASSY, MP 7/8 ID X 43 OAL 34 SEE NOTE 1 SUB ASSEMBLY,MODULAR,CLR PACK 375D For parts breakdown, see SPACER,1-7/8 SAE L/O-RING GROOVE ADAPTER,1/4 NPT X 1/4 BSPP SHROUD,FAN 375D GROMMET,1.75 DIA DRAINLOCK, 1/4" CLAMP, HOSE 3" CLAMP, HOSE 3/8" ELEMENT, THERMAL VALVE 190DEG ELBOW, 5/16"H X 1/4"P PLUG,PIPE 1/4" 3000# STL NUT, HEX FLGD PLTD 3/ O-RING,VITON 2 1/2 X 3/ CAPSCREW,HEX 8.8M 8 X 16MM PLT CAPSCREW,FERRY HEAD 3/8-16 X 1 1/2" CAPSCREW,HEX GR5 1/2-13 X 1 1/ SCREW, HX SER WASH 5/16 X 3/4" SCREW, HX SER WASH 5/16 X 1" SCREW, HX SER WASH 3/8 X 1" WASHER,PL-B REG UNFIN 5/16" WASHER, SPRLOCK REG PLTD 1/2" Subject to EAR, ECCN EAR99 and related export control restrictions. 36

41 1.10 Cooling system (400HH & 425H) Key Part number Qty Description Notes WASHER,PL-B REG PLTD 3/ HOSE, HEATER 1 1/4" (FT) HOSE, FUEL LINE 5/16" (FT) WASHER, ISO HV U-BOLT, 1/4 X 1 1/2 PIPE PLT REDUCER,STR THRD 1 1/4 X 1" VITON REDUCER,STR THRD 1 1/2 X 1 VITON REDUCER,STR THRD 1 1/2X1 1/4 VITON UNION,STRT THRD 1 5/ PLUG,STR THD HOL HX 9/ WASHER, NORD-LOCK PL 1/2" CONNECTOR,STR THD/ORFS 1 7/16 X 1" ELBOW,ST THD/ORFS 1 5/16 X 1 Drawing notes A1 ENGINE COOLANT OVERFLOW TO FRAME CONTAINMENT. A2 TO RECEIVER OIL PICK-UP PORT. A3 TO COMPRESSOR UNIT OIL INJECTION PORT. A4 TO ENGINE WATER PUMP/FILL PORT. A5 TO RADIATOR. A6 TO ENGINE THERMOSTAT. A7 TO ENGINE AIR INTAKE. A8 TO TURBOCHARGER. A9 TO FRAME. A10 TO LIFT BAIL Subject to EAR, ECCN EAR99 and related export control restrictions. 37

42 1.11 Cooler pack sub-assembly R02 Subject to EAR, ECCN EAR99 and related export control restrictions. 38

43 1.11 Cooler pack sub-assembly Key Part number Qty Description Notes COOLER,RADIATOR 375D CAT/JD COOLER,OIL 375D CAT/JD BAFFLE,CLR TOP 375D BAFFLE,COOLERS 375D SS COOLER,CHARGE AIR 375D CAT/JD BAFFLE,COOLERS 375D CS SCREW, HX SER WASH 5/16 X 3/4" WASHER,PL-B REG PLTD 5/16 Subject to EAR, ECCN EAR99 and related export control restrictions. 39

44 1.12 Discharge system, standard (375 & 425) R03 (sh1) Subject to EAR, ECCN EAR99 and related export control restrictions. 40

45 1.12 Discharge system, standard (375 & 425) R03 (sh2) Subject to EAR, ECCN EAR99 and related export control restrictions. 41

46 1.12 Discharge system, standard (375 & 425) Key Part number Qty Description Notes INSERT,NYL TBG 1/4 OD X.035W TUBE,NYL.25 OD X 040W WHT(FT) TUBE,NYL.25 OD X 040W BLK(FT) ELBOW, CHECK VALVE 1/4T X 1/8P TUBE,NYL.3125OD X.04W WHT(FT) INSERT,NYL TBG 3/8 OD X.062 W FLANGE,KITSAE SPLT 2 1/2" - VITON ELBOW,90 3/8" TUBE X 1/4 MNPTF TUBING,NYLON-11 3/8"OD RED TUBING,NYLON-11 3/8"OD YELLOW TUBING,NYLON-11 3/8"OD GREEN TUBING,NYLON-11 3/8"OD BLUE 13 SEE NOTE 1 SUB ASSEMBLY,MODULAR, REC TANK 375D For parts breakdown, see PIPE,DISCH 2.5" SEE NOTE. 1 SUB ASSEMBLY,MODULAR,REG/BD VLV 375 STD For parts breakdown, see ORIFICE, M X.125F HRS CONNECTOR, 1/4"TUBE X 1/4"NPT CAPSCREW,HEX GR5 1/2-13 X 1 1/2" SCREW, HX SER WASH 3/8-16X1/2" BUSHING,RED 1/4 X 1/8" STL PLT WASHER, NORD-LOCK PL 1/2" SP Drawing notes A1 TO COMPRESSOR DISCHARGE A2 TO SCAVENGE LINE PORT A3 TO COMPRESSOR PORT BELOW INLET VALVE A4 TO START/RUN VALVE A5 TO FRAME Subject to EAR, ECCN EAR99 and related export control restrictions. 42

47 Notes: Subject to EAR, ECCN EAR99 and related export control restrictions. 43

48 1.13 Discharge system, standard (375H & 425H) R03(sh1) Subject to EAR, ECCN EAR99 and related export control restrictions. 44

49 1.13 Discharge system, standard (375H & 425H) R03 (sh2) Subject to EAR, ECCN EAR99 and related export control restrictions. 45

50 1.13 Discharge system, standard (375H & 425H) Key Part number Qty Description Notes INSERT,NYL TBG 1/4 OD X.035W TUBE,NYL.25 OD X 040W WHT(FT) TUBE,NYL.25 OD X 040W BLK(FT) ELBOW, CHECK VALVE 1/4T X 1/8P TUBE,NYL.3125OD X.04W WHT(FT) INSERT,NYL TBG 3/8 OD X.062 W FLANGE,KITSAE SPLT 2 1/2" - VITON TUBING,NYLON-11 3/8"OD RED TUBING,NYLON-11 3/8"OD YELLOW TUBING,NYLON-11 3/8"OD GREEN TUBING,NYLON-11 3/8"OD BLUE TUBING,NYLON-11 3/8"OD ORANGE 13 SEE NOTE 1 CONTROL, ORFICE ASSY 375H T3 For parts breakdown, see SEE NOTE. 1 SUB ASSEMBLY,MODULAR, RECEIVER TANK 375D For parts breakdown, see PIPE,DISCH 2.5" SEE NOTE.. 1 SUB ASSEMBLY,MODULAR,REG/BD VLV 375H-375HH For parts breakdown, see ORIFICE, M X.125F HRS TEE, MALE RUN 1/4T X 1/4P CAPSCREW,HEX GR5 1/2-13 X 1 1/2" SCREW, HX SER WASH 3/8-16X1/2" BUSHING,RED 1/4 X 1/8" STL PLT WASHER, NORD-LOCK PL 1/2" SP Drawing notes A1 TO COMPRESSOR DISCHARGE A2 TO SCAVENGE LINE PORT A3 TO COMPRESSOR PORT BELOW INLET VALVE A4 TO START/RUN VALVE A5 TO HI/LOW VALVE A6 TO FRAME Subject to EAR, ECCN EAR99 and related export control restrictions. 46

51 Notes: Subject to EAR, ECCN EAR99 and related export control restrictions. 47

52 1.14 Discharge system, standard (400HH) R02 (sh1) Subject to EAR, ECCN EAR99 and related export control restrictions. 48

53 1.14 Discharge system, standard (400HH) R02 (sh2) Subject to EAR, ECCN EAR99 and related export control restrictions. 49

54 1.14 Discharge system, standard (400HH) Key Part number Qty Description Notes INSERT,NYL TBG 1/4 OD X.035W TUBE,NYL.25 OD X 040W WHT(FT) TUBE,NYL.25 OD X 040W BLK(FT) ELBOW, CHECK VALVE 1/4T X 1/8P TUBE,NYL.3125OD X.04W WHT(FT) INSERT,NYL TBG 3/8 OD X.062 W FLANGE,KITSAE SPLT 2 1/2" - VITON TUBING,NYLON-11 3/8"OD RED TUBING,NYLON-11 3/8"OD YELLOW TUBING,NYLON-11 3/8"OD GREEN TUBING,NYLON-11 3/8"OD BLUE TUBING,NYLON-11 3/8"OD ORANGE 13 SEE NOTE 1 CONTROL, ORFICE ASSY 375H T3 For parts breakdown, see PIPE,DISCH 2.5" SEE NOTE. 1 SUB ASSEMBLY,MODULAR,REG/BD VLV 375H-375HH For parts breakdown, see SEE NOTE.. 1 INSTALLATION Design Item (dwg), REC/CTL PTS 375H-300HH T3 For parts breakdown, see ORIFICE, M X.125F HRS CONNECTOR, 1/4"TUBE X 1/4"NPT CAPSCREW,HEX GR5 1/2-13 X 1 1/2" SCREW, HX SER WASH 3/8 X 3/4" BUSHING,RED 1/4 X 1/8" STL PLT WASHER, NORD-LOCK PL 1/2" SP Drawing notes A1 TO COMPRESSOR DISCHARGE A2 TO SCAVENGE LINE PORT A3 TO COMPRESSOR PORT BELOW INLET VALVE A4 TO START/RUN VALVE A5 TO HI/LOW VALVE A6 TO FRAME Subject to EAR, ECCN EAR99 and related export control restrictions. 50

55 Notes: Subject to EAR, ECCN EAR99 and related export control restrictions. 51

56 1.15 Discharge system, aftercooled and filtered (375 & 425) R05 (sh1) Subject to EAR, ECCN EAR99 and related export control restrictions. 52

57 1.15 Discharge system, aftercooled and filtered (375 & 425) R05 (sh2) Subject to EAR, ECCN EAR99 and related export control restrictions. 53

58 1.15 Discharge system, aftercooled and filtered (375 & 425) R05 (sh3) Subject to EAR, ECCN EAR99 and related export control restrictions. 54

59 1.15 Discharge system, aftercooled and filtered (375 & 425) R05 (sh4) Subject to EAR, ECCN EAR99 and related export control restrictions. 55

60 1.15 Discharge system, aftercooled and filtered (375 & 425) Key Part number Qty Description Notes INSERT,NYL TBG 1/4 OD X.035W TUBE,NYL.25 OD X 040W WHT(FT) TUBE,NYL.25 OD X 040W BLK(FT) ELBOW, CHECK VALVE 1/4T X 1/8P TUBE,NYL.3125OD X.04W WHT(FT) INSERT,NYL TBG 3/8 OD X.062 W FLANGE,KITSAE SPLT 2 1/2" - VITON ELBOW,90 3/8" TUBE X 1/4 MNPTF TUBE,NYL.375OD X.05W BLK(FT) TUBING,NYLON-11 3/8"OD RED TUBING,NYLON-11 3/8"OD YELLOW TUBING,NYLON-11 3/8"OD GREEN TUBING,NYLON-11 3/8"OD BLUE 14 SEE NOTE 1 SUB ASSEMBLY,MODULAR, RECEIVER TANK 375D For parts breakdown, see SEE NOTE. 1 SUB ASSEMBLY,MODULAR,AFTER CLR 375D ACF For parts breakdown, see PIPE,DISCH 2.5" SEE NOTE.. 1 SUB ASSEMBLY,MODULAR,REG/BD VLV 375 STD For parts breakdown, see HOSE,ASSY MP 1-3/8ID X 50.5OAL HOSE,MP 1-3/8ID X 17.5"OAL ORIFICE, M X.125F HRS TEE, MALE RUN 1/4T X 1/4P CAPSCREW,HEX GR5 3/8-16 X 1 1/4" CAPSCREW,HEX GR5 1/2-13 X 1 1/2" SCREW, HX SER WASH 3/8-16X1/2" BUSHING,RED 1/4 X 1/8" STL PLT WASHER, NORD-LOCK PL 3/8" SP WASHER, NORD-LOCK PL 1/2" SP Subject to EAR, ECCN EAR99 and related export control restrictions. 56

61 1.15 Discharge system, aftercooled and filtered (375 & 425) Key Part number Qty Description Notes Drawing notes A1 TO COMPRESSOR DISCHARGE A2 TO SCAVENGE LINE PORT A3 TO COMPRESSOR PORT BELOW INLET VALVE A4 TO START/RUN VALVE A5 TO SERVICE VALVE CONNECTION A6 TO FRAME A7 THROUGH FRAME Subject to EAR, ECCN EAR99 and related export control restrictions. 57

62 1.16 Discharge system, aftercooled and filtered (375H & 425H) R04 (sh1) Subject to EAR, ECCN EAR99 and related export control restrictions. 58

63 1.16 Discharge system, aftercooled and filtered (375H & 425H) R04 (sh2) Subject to EAR, ECCN EAR99 and related export control restrictions. 59

64 1.16 Discharge system, aftercooled and filtered (375H & 425H) R04 (sh3) Subject to EAR, ECCN EAR99 and related export control restrictions. 60

65 1.16 Discharge system, aftercooled and filtered (375H & 425H) R04 (sh4) Subject to EAR, ECCN EAR99 and related export control restrictions. 61

66 1.16 Discharge system, aftercooled and filtered (375H & 425H) Key Part number Qty Description Notes INSERT,NYL TBG 1/4 OD X.035W TUBE,NYL.25 OD X 040W WHT(FT) TUBE,NYL.25 OD X 040W BLK(FT) ELBOW, CHECK VALVE 1/4T X 1/8P TUBE,NYL.3125OD X.04W WHT(FT) INSERT,NYL TBG 3/8 OD X.062 W FLANGE,KITSAE SPLT 2 1/2" - VITON TUBE,NYL.375OD X.05W BLK(FT) TUBING,NYLON-11 3/8"OD RED TUBING,NYLON-11 3/8"OD YELLOW TUBING,NYLON-11 3/8"OD GREEN TUBING,NYLON-11 3/8"OD BLUE TUBING,NYLON-11 3/8"OD ORANGE CONTROL, ORFICE ASSY 375H T3 For parts breakdown, see SEE NOTE 1 SUB ASSEMBLY,MODULAR, RECEIVER TANK 375D For parts breakdown, see SEE NOTE. 1 SUB ASSEMBLY,MODULAR,AFTER CLR 375D ACF For parts breakdown, see PIPE,DISCH 2.5" SEE NOTE.. 1 SUB ASSEMBLY,MODULAR,REG/BD VLV 375H-375HH For parts breakdown, see HOSE,ASSY MP 1-3/8ID X 50.5OAL HOSE,MP 1-3/8ID X 17.5"OAL ORIFICE, M X.125F HRS TEE, MALE RUN 1/4T X 1/4P CAPSCREW,HEX GR5 3/8-16 X 1 1/4" CAPSCREW,HEX GR5 1/2-13 X 1 1/2" SCREW, HX SER WASH 3/8-16X1/2" BUSHING,RED 1/4 X 1/8" STL PLT WASHER, NORD-LOCK PL 3/8" SP WASHER, NORD-LOCK PL 1/2" SP Subject to EAR, ECCN EAR99 and related export control restrictions. 62

67 1.16 Discharge system, aftercooled and filtered (375H & 425H) Key Part number Qty Description Notes Drawing notes A1 TO COMPRESSOR DISCHARGE A2 TO SCAVENGE LINE PORT A3 TO COMPRESSOR PORT BELOW INLET VALVE A4 TO START/RUN VALVE A5 TO HI/LOW VALVE A6 TO FRAME A7 THROUGH FRAME A8 TO SERVICE VALVE CONNECTION A9 TO LOUVERED DOOR Subject to EAR, ECCN EAR99 and related export control restrictions. 63

68 1.17 Discharge system, aftercooled and filtered (400HH) R05 (sh1) Subject to EAR, ECCN EAR99 and related export control restrictions. 64

69 1.17 Discharge system, aftercooled and filtered (400HH) R05 (sh2) Subject to EAR, ECCN EAR99 and related export control restrictions. 65

70 1.17 Discharge system, aftercooled and filtered (400HH) R05 (sh3) Subject to EAR, ECCN EAR99 and related export control restrictions. 66

71 1.17 Discharge system, aftercooled and filtered (400HH) R05 (sh4) Subject to EAR, ECCN EAR99 and related export control restrictions. 67

72 1.17 Discharge system, aftercooled and filtered (400HH) Key Part number Qty Description Notes INSERT,NYL TBG 1/4 OD X.035W TUBE,NYL.25 OD X 040W WHT(FT) TUBE,NYL.25 OD X 040W BLK(FT) ELBOW, CHECK VALVE 1/4T X 1/8P TUBE,NYL.3125OD X.04W WHT(FT) INSERT,NYL TBG 3/8 OD X.062 W FLANGE,KITSAE SPLT 2 1/2" - VITON TUBE,NYL.375OD X.05W BLK(FT) ELBOW,90M 5/16"TUBE X 1/8"NPT TUBING,NYLON-11 3/8"OD RED TUBING,NYLON-11 3/8"OD YELLOW TUBING,NYLON-11 3/8"OD GREEN TUBING,NYLON-11 3/8"OD BLUE TUBING,NYLON-11 3/8"OD ORANGE 15 SEE NOTE 1 CONTROL, ORFICE ASSY 375H T3 For parts breakdown, see SEE NOTE. 1 SUB ASSEMBLY,MODULAR,AFTER CLR 375D ACF For parts breakdown, see PIPE,DISCH 2.5" SEE NOTE.. 1 SUB ASSEMBLY,MODULAR,REG/BD VLV 375H-375HH For parts breakdown, see HOSE,ASSY MP 1-3/8ID X 50.5OAL 20 SEE NOTE... 1 SUB ASSEMBLY,MODULAR,RECEIVER TANK 375D HH For parts breakdown, see HOSE,MP 1-3/8ID X 17.5"OAL ORIFICE, M X.125F HRS TEE, MALE RUN 1/4T X 1/4P CAPSCREW,HEX GR5 3/8-16 X 1 1/4" CAPSCREW,HEX GR5 1/2-13 X 1 1/2" SCREW, HX SER WASH 3/8 X 3/4" BUSHING,RED 1/4 X 1/8" STL PLT Subject to EAR, ECCN EAR99 and related export control restrictions. 68

73 1.17 Discharge system, aftercooled and filtered (400HH) Key Part number Qty Description Notes WASHER, NORD-LOCK PL 3/8" SP WASHER, NORD-LOCK PL 1/2" SP Drawing notes A1 TO COMPRESSOR DISCHARGE A2 TO SCAVENGE LINE PORT A3 TO COMPRESSOR PORT BELOW INLET VALVE A4 TO START/RUN VALVE A5 TO SERVICE VALVE CONNECTION A6 TO FRAME A7 THROUGH FRAME A8 TO HIGH/LOW VALVE Subject to EAR, ECCN EAR99 and related export control restrictions. 69

74 1.18 Receiver tank sub-assembly (375, 375H, 425 & 425H) R06 Subject to EAR, ECCN EAR99 and related export control restrictions. 70

75 1.18 Receiver tank sub-assembly (375, 375H, 425 & 425H) Key Part number Qty Description Notes VALVE,RELIEF 3/4NPT X 1-1/4 200PSI ADAPTER,SAE 1 7/8-12 X 1 7/ PLUG, SIGHT GLASS 1 7/8" SAE ELBOW,90 3/8" TUBE X 1/4 MNPTF CONNECTOR,TUBE OIL RETURN 5/16X1/ SWITCH, NC 250F 2 POLE VALVE,MINIMUM PRESSURE 1-7/8-12 SAE TANK,AIR-OIL SEP PLUG, O-RING BOSS SAE 1 1/ STRAINER, V-TYPE 300PSIX1/ TUBE, STEEL 5/16"OD OIL SIPHON CONNECTOR, 1/4"TUBE X 1/4"NPT ELEMENT,OIL SEP 8.81 X CONNECTOR, TUBE-M 5/16 X 1/4" ELBOW, PIPE 90M/F 3/8 X 1/2" PLUG, PIPE 1/8" 3000# STL PLT PLUG, PIPE 1/2" 3000# STL PLT ELBOW,ST THD/ORFS 1 5/16 X 1 Subject to EAR, ECCN EAR99 and related export control restrictions. 71

76 1.19 Receiver tank sub-assembly (400HH) R03 Subject to EAR, ECCN EAR99 and related export control restrictions. 72

77 1.19 Receiver tank sub-assembly (400HH) Key Part number Qty Description Notes ADAPTER,SAE 1 7/8-12 X 1 7/ PLUG, SIGHT GLASS 1 7/8" SAE ELBOW,90 3/8" TUBE X 1/4 MNPTF VALVE,RELIEF 1.0NPT X 1-1/4 250PSIG CONNECTOR,TUBE OIL RETURN 5/16X1/ SWITCH, NC 250F 2 POLE VALVE,MINIMUM PRESSURE 1-7/8-12 SAE TANK,AIR-OIL SEP PLUG, O-RING BOSS SAE 1 1/ STRAINER, V-TYPE 300PSIX1/ TUBE, STEEL 5/16"OD OIL SIPHON CONNECTOR, 1/4"TUBE X 1/4"NPT ELEMENT,OIL SEP 8.81 X CONNECTOR, TUBE-M 5/16 X 1/4" ELBOW, PIPE 90M/F 3/8 X 1/2" PLUG, PIPE 1/8" 3000# STL PLT PLUG, PIPE 1/2" 3000# STL PLT ELBOW,ST THD/ORFS 1 5/16 X 1 Subject to EAR, ECCN EAR99 and related export control restrictions. 73

78 1.20 Aftercooler sub-assembly R05 Subject to EAR, ECCN EAR99 and related export control restrictions. 74

79 1.20 Aftercooler sub-assembly Key Part number Qty Description Notes VALVE,BLOWDOWN 1/4 NPT HI PRS STRIP, WEATHER 1" X 1/8" FOAM (FT) ELBOW,TUBE-M 3/8" COMPR VALVE,BALL/STNR COMB 1/2M X 1/2M GASKET,DOOR EDGE EPDM BLACK MANIFOLD, TUBE PUSH-IN 3/8 1/ PLUG, MANF 1/4" PUSH-IN CLAMP,FILTER COONECTION-CLP DRAIN,EXTERNAL FLOAT 1/ SEPARATOR,WTR CS-650 2" W/O DR CAPSCREW,HEX SOC BTN HD 3/8 X 3/ COOLER,AFTERCOOLER 375D 2.25" THICK CORE SUPPORT,BRACKET AFTERCOOLER 375D TOP SUPPORT,BRACKET AFTERCLR 375D BTM SUPPORT,BRACKET FX FLTR ELBOW,1.5MX 1.5F 37DEG FL CONNECTOR,37FL SW 1-1/2X1-1/2 ST ZN SUPPORT,BRACE 375 AFTER CLR CS SUPPORT,BRACE 375 AFTER CLR SS FILTER,FXFR "NPT FILTER,FXHR "NPT SCREW,RND PHILLIPS #8-32 X 1" CONNECTOR, 1/4"TUBE X 1/4"NPT ELBOW, 1/4"TUBE X 1/4"NPT NUT, HEX FLGD PLTD 5/ BOLT, CARRIAGE CP 5/16 X 3/4" SCREW, HX SER WASH 3/8 X 3/4" Subject to EAR, ECCN EAR99 and related export control restrictions. 75

80 1.20 Aftercooler sub-assembly Key Part number Qty Description Notes ELBOW, 37FL 45M 1-1/2 X 1 1/ PLUG, PIPE 1/8" 3000# STL PLT BUSHING,RED 1/2 X 3/8" STL PLT NIPPLE,PIPE HEX 1/4 X 1/4" PLT CONNECTOR, STR X JIC 1 7/8 X 1 7/ CONNECTOR,90D STRXJIC 1 7/8 X 1 7/ WASHER, NORD-LOCK PL 3/8" CONNECTOR, TUBE-M 1/4 X 1/8" Subject to EAR, ECCN EAR99 and related export control restrictions. 76

81 Notes: Subject to EAR, ECCN EAR99 and related export control restrictions. 77

82 1.21 Orifice control sub-assembly R00 Subject to EAR, ECCN EAR99 and related export control restrictions. 78

83 1.21 Orifice control sub-assembly Key Part number Qty Description Notes ORIFICE,CTL TAB 1/8FNPT X 1/8MNPT CONNECTOR, 3/8 TUBE X 1/4NPT SILENCER, AIR EJECTION 1/8"NPT-MALE THREAD TEE, PIPE 1/4" 150# PLT BUSHING,RED 1/4 X 1/8" STL PLT NIPPLE,PIPE HEX 1/4 X 1/4" PLT Subject to EAR, ECCN EAR99 and related export control restrictions. 79

84 1.22 Regulator and blowdown valve sub-assembly (375 & 425) R02 Subject to EAR, ECCN EAR99 and related export control restrictions. 80

85 1.22 Regulator and blowdown valve sub-assembly (375 & 425) Key Part number Qty Description Notes ELBOW, 90 5/16T PLS * 1/4 NPT TEE,M RN3/8" TUBE X 1/4" MNPTF ELBOW,90 3/8" TUBE X 1/4 MNPTF SENSOR, PRESS 225PSIG 1-5VDC CONNECTOR,TUBE-M 3/8TUBE X 1/4MNPT MANIFOLD, PRESS REG/BD 100PSI ELBOW, 1/4"TUBE X 1/4"NPT BUSHING,RED 1/4 X 1/8" STL PLT BUSHING,RED 1/2 X 3/8" STL PLT TEE,MALE/FEMALE/FEMALE 1/4 Subject to EAR, ECCN EAR99 and related export control restrictions. 81

86 1.23 Regulator and blowdown valve sub-assembly (375H, 400HH & 425H) R02 Subject to EAR, ECCN EAR99 and related export control restrictions. 82

87 1.23 Regulator and blowdown valve sub-assembly (375H, 400HH & 425H) Key Part number Qty Description Notes ELBOW, 90 5/16T PLS * 1/4 NPT TEE,M RN3/8" TUBE X 1/4" MNPTF ELBOW,90 3/8" TUBE X 1/4 MNPTF TRANSDUCER, PRESS 0-100PSI 5VOLT N SENSOR, PRESS 225PSIG 1-5VDC CONNECTOR,TUBE-M 3/8TUBE X 1/4MNPT MANIFOLD, PRESS REG/BD 100PSI VALVE, PRESSURE REGULATOR ELBOW, 1/4"TUBE X 1/4"NPT ELBOW, PIPE 90M 1/4 X 1/4" BUSHING,RED 1/4 X 1/8" STL PLT NIPPLE,PIPE HEX 1/2 X 1/4" PLT CROSS, FEMALE PIPE NPTF 1/4" TEE,MALE/FEMALE/FEMALE 1/4 Subject to EAR, ECCN EAR99 and related export control restrictions. 83

88 1.24 Fuel system R06 Subject to EAR, ECCN EAR99 and related export control restrictions. 84

89 1.24 Fuel system Key Part number Qty Description Notes SENDER,FUEL LEVEL 23.0 TANK DEPTH CAP, FUEL TANK NON-VENTED 4" FILTER,FUEL INLINE CLAMP,HOSE O.D CLAMP,WRM DRV TYP M SAE CLAMP,WRM DRV TYP M SAE BREATHER, 3 MICRON 3/8 NPT STRAINER,FUEL FILL 185D ADAPTER,HOSE BARB 3/8 NPT FEMALE SUPPORT,HOSE FUEL SUPPORT,FUEL INLET SCREEN TUBE,FUEL PICKUP 1/2 OD STRAP,FUEL TANK 375D ADAPTER,M 3/8 BARB X 3/8 NPT CONNECTOR,TUBE X SAE SPCL 1/ TANK,FUEL 375D ELBOW,F 11/16-16ORFSX3/8-18NPTF SUPPORT,BRACKET FUEL TANK CAT 375D STRAP,FUEL TANK 375D CONNECTOR,TUBE X SAE SPCL 3/ SUPPORT,BRACKET FUEL HOSES CAT 375D TUBE,FUEL PICK UP 375D HOSE,FUEL RETURN 3/8" 375D INSULATION,HEAT SHLD 375D CAT C CLAMP, HOSE O.D CLAMP, HOSE O.D NUT, HEX FLGD PLTD 5/ NUT, HEX LOCKING PLTD 3/8-16 Subject to EAR, ECCN EAR99 and related export control restrictions. 85