Spare Parts List ( ) Clipper V

Size: px

Start display at page:

Download "Spare Parts List ( ) Clipper V"

Bertha Beverley Rose
5 years ago
Views:

1 Spare Parts List ( ) Clipper V From Serial Number (Ref No1*) *See Serial Number Page or call manufacturer C 02/23/

2 How to Use this Spare Parts List The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts lists include a number of columns of information: REF - column refers to the reference number on the parts illustration. PART NO. - column lists the part number for the part. QTY - column lists the quantity of the part used in that area of the machine. DESCRIPTION - column is a brief description of the part. SERIAL NO. FROM - If this column has an (*) and a Reference number, see the SERIAL NUMBERS page in the back of your manual. If column has two asterisk (**), call manufacturer for serial number. The serial number indicates the first machine the part number is applicable to. The main illustration shows the most current design of the machine. When a boxed illustration is shown, it displays the older design. NOTES - column for information not noted by the other columns. NOTE: If a service or option kit is installed on your machine, be sure to keep the KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts. 2

3 Table of Contents Brush Control Panel Frame Pump Recovery Tank Solution Tank Vacuum Shoe Wiring Diagram Serial Numbers

4 Brush

5 Brush REF PART NO. QTY DESCRIPTION AXLE, ROLLER BEARING, R6 3/8 ID BEARING, 1.125ODX.500IDX BELT, 180J6 MICRO-V ADAPTER BRUSH BRG. DIE CAST BRKT, BRUSH PULLEY BRKT, BRUSH HEIGHT REF FRAME, CLIPPER REF KIT, BRNG/ADPTR EXTRCTR HOUSING, BRUSH, 18" LABEL, BRUSH HEIGHT LINKAGE, ASM, BRUSH HEIGHT LINKAGE ASM, ROLLER SUPPORT LINK, ROLLER, FRONT LEVER, HEIGHT ADJUSTMENT NUT, HEX NYLOCK NUT, 3/8 DIA CAP, TYPE PUSH PLT PLATE, BRUSH HOUSING RH PLATE, BRUSH HOUSING LH PLATE, AXLE RETAINER PULLEY, 2.2 OD, 6GR, MICRO-V PIN, ROLL 1/4 X 1.25L ROLLER, 1.9 DIA X 10.5 LG SCR, X 5/8 PFHMS SCR, X 1/2 PPHMS SS DL SCR, X 1/2 FHMS SS SCR, X 3/8 FHMS SS SCR, #10-24 X 1/2 SHCS WASHER, #10 LOCK EXT STAR SS WASHER, #10 X 9/ OD SCR, 1/4-20 X. 5/8 THMS PLTD NP BRUSH, 18L X 3.38 OD G RING, TOLERANCE 7/8 ID X 1/2 W CLIP, BEARING DRIVER, BRUSH SHOULDER BOLT, 3/8 X.375L SS RING, 1/2 EXT. SNAP PIN, CLEVIS 1/4 X 1/2 PLTD COTTER, 1/4" RING SPACER,.81 X 1.06 X PULLEY ASM, BRUSH DRIVER ASM, BRUSH BRUSH ASM, 18 IN SERIAL NO. FROM NOTES 5

6 Control Panel C (SEE FRAME) 34 36A 36B

7 Control Panel REF PART NO. QTY DESCRIPTION TERMINAL BLOCK, 115V (3-4-3) BREAKER, 7A 250VAC 50VDC BREAKER, 4A VDE CIRCUIT BOOT, 3/8 CIRCUIT BREAKER HOUSING, CLP HANDLE PIVOT CORD ASM, PIGTAIL CONTACT, ELECTRICAL, FLAT CONTACT, ELECTRICAL, BENT HANDLE, CLP12 WELDED HANDLE, CONTROL PANEL FRONT HANDLE, CONTROL PANEL REAR LOCK, HANDLE POSITION NUT, 1/2-13HEX NYLOCK THIN PLTD SCR, 6-32 X 3/8 PPHMS NUT, 1/2 NPT CONDUIT PLATE, CONTROL PANEL, CLP/ADM SET SCR, 5/-18 X 1/2 CONE PT SWITCH, SPST 2-POSITION ROCKER SWITCH, DPDT3-POSITION ROCKER STRAIN RELIEF, 1/2 NPT (.48ID) TRIGGER, SWITCH, YLW LABEL, CONTROL PANEL, CLP/ADM NUT, 6-32 W/STAR WASHER PLTD NUT, 1/4-20 HEX NYLOCK SS SCR, 1/2-13 X 4.75HHCS GR5 PLT SPRING, COMP.88D X1.4L X.100W SCR, #10 X 3/4 PPHST TYPE B SCR, 6-32 X 1/4 PPHMS SS WASHER, #6 LOCK EXT STAR SS SCR, 1/4-20 X 1.75 HHCS SCR, 6-32 X 1.0 PH BLK NYLON WASHER, M10 X 30 PLTD WASHER, 3/8 ID INT.LOCK THIN CLIP, POWER CORD REF HARNESS, MAIN CLP/ADM 36A CORD ASM, 230V EURO 50FT 36B CORDASM1.5MM2X50 SAA,BLK AUSTR RING, 2" DIA SPLIT STRAIN RELIEF, CORD HOOK CABLE,.06 X 40, 0707, SS SCR, X 1 PPHMS NUT, W/STAR WASHER PLTD WASHER, 1/4 LOCK EXT STAR SS RING, 1/4 KLIP LEVER ASM, CLP HANDLE ADJ SCR, X 3/8 HHTR W/STAR CORD, /8 X 12" CARD, INSTRUCTION CLP CLAMP, 7/ DIA NYLON UL SWITCH, DPDT, 2 POSITION ROCKER LABEL, GROUND SYMBOL SERIAL NO. FROM NOTES: 7

8 Frame (SEE SOLUTION TANK) A B C (SEE CONTROL PANEL)

9 Frame REF PART NO. QTY DESCRIPTION HUBCAP, 9.75" WHEEL, BLACK FRAME, CLIPPER HOSE ASM, 1.5 BLK VAC X HUBCAP, 5/8" SHAFT HARNESS, MAIN, CLP/ADM HINGE, TANK TO FRAME MOTOR ASM, BRUSH CLP FAMILY NUT, HEX NYLOCK NUT, 1/4-20 HEX NYLOCK SS FOAM TAPE, 1/8 THK X 3/4 1SDA PLATE, BRUSH MTR CLAMP PULLEY, 1.4 OD, 6GR, MICRO-V SPACER, HANDLE PIVOT GEAR, 40 TOOTH SCR, 1/4-20 X 3/8 PPHMS SCR, X 3/4 PPHMS PIN, ROLL 1/8 X 1.0 L WASHER, 1/4 ID X 5/8 OD SS WASHER, 1/4 LOCK EXT STAR SS WASHER, #10 X 9/ OD SET SCR, X 1/4 KCP STRAIN RELIEF, 90 DEGREE SCR, 1/4-20 X 1 PPHMS SS WHEEL, 9.75" X 1.5" AXLE, 5/8 X 17.06L HEAT SHRINK, 3/4 ID UL/CSA SEAL, FRAME/TANK CLAMP, 2.0" WORM GEAR SCR, 5/-18 X 3.5 SHCS PLATED WASHER, 5/ SPLIT LOCK PLTD BRKT, CLP HANDLE SUPPORT BRKT, CLP HANDLE SUPPORT LT SCR, 1/4-20 X 1/2 HHCS PLTD SERIAL NO. FROM NOTES: 9

10 Pump D (SEE SOLUTION TANK)

11 Pump REF PART NO. QTY DESCRIPTION COUPLING, 1/4 ANCHOR W/1" HEX CONNECTOR, 1/8FPT X 1/4 TUBE QC ELBOW, SWIVEL, 1/4MPTX1/4TUBE ELBOW, SWIVEL,3/8MPTX3/8TUBE QC JET BODY, MINI PROMAX BODY JET, MINI PROMAX NUT, HEX NYLOCK PUMP ASM, 230V 100PSI W/CONN PLUG, 9/ OD BLK NYLON SCR, X 1.25 PPHMS SCR, 1/4-20 X 5/8 HHCS SS FITTING,1/4 TUBE,"Y", QC TEE, 3/8 MPT X 3/8 TUBE, QC VALVE ASM,SOLENOID CLP FAMILY WASHER, 1/4" ID X 1.0 OD. FLAT SS WASHER, #10 X 9/ OD WASHER, 7/ X 3/4 X.19RUBBER NIPPLE, 1/4 CLOSE NIPPLE, 1/4 FPT QD ELBOW, 1/4 MPT X 3/8 TUBE, QC SCR, X 1/2 PPHMS SS DUCT, 1/2 ID SPLT FLX X WIRE, 22" GRN/ X HOSE, 3/8 OD X 1/4 ID URTHN X HOSE, 3/8 ID NYLON YLW X HOSE, 1/4 ID NYLON YLW X SCREEN, INTAKE ELBOW, 1/8NPT STREET BANDS, RUBBER SERIAL NO FROM NOTES: 11

12 Recovery Tank E E

13 Recovery Tank REF PART NO. QTY DESCRIPTION CLAMP, 2.0" WORM GEAR X CLAMP, 2.0" WORM GEAR DOME ASM, CLP FAM COVER, REC. TANK DOME, CLP FAMILY FLOAT SHUT-OFF GASKET, DOME GASKET, PORT COVER HOSE, 1.5 X 12.0 DRAIN HOSE, INSERT HOSE, CAP, YLW SCR, #10 X 3/4 PPHST TYPE B TANK, CLP RECOVERY BRKT, HOSE HOOK CORD, /8 X 12" SERIAL NO. FROM NOTES: 13

14 Solution Tank (SEE FRAME) A * 33 14* 30 24* 8 27 B 9 1 (SEE FRAME) 34 17* * 4 5* D 23* 21* (SEE PUMP) 25 14

15 Solution Tank REF PART NO. QTY DESCRIPTION CLAMP, 2.0" WORM GEAR CLAMP, 3/8 HOSE (D-SLOT) COVER, VAC MOTOR COVER, BELT ELBOW, 3/8 MPT X 3/8 TUBE, PLASTIC GASKET, TANK TO VAC COVER GASKET, VAC COVER (CLP FAMILY) HOSE,1/2 CLEAR X HOSE, 1.5 BLK VAC X REF HOSE ASM, 1.5 BLK VAC X HOUSING, VAC MOTOR VAC MOTOR ASM, CLP FAMILY BRUSH SET, 230V VAC MTR WNDSR SCR, #10 X 1.0 PPHST TYPE B TANK, CLP SOLUTION VENT, COOLING AIR LARGE WASHER, #10 X 9/ OD STRAINER, 3/8 IN. NPT 60 MESH WASHER, 1/4 ID X 5/8 OD SS SCR, 1/4-20 X 1/2 PPHMS SS DL CLAMP, 3.5" WORM GEAR GASKET, TANK, L-F GASKET, TANK, L-R GASKET, TANK, RH HOSEBARB, 3/8MPTX1/2 90D DL SCR, #10 X 3/4 PPHST TYPE B HOSE ASSY- FILL HOSE CORD, /8 X 12" HOSEBARB, 1/2MPT X 3/8 DL COVER, CLP SOLUTION LANYARD,.06 X TANK ASM, SOLUTION CLP CLAMP, 1/4 ID HOSE LABEL, CLIPPER SIDE LABEL, WINDSOR LOGO DOMED SERIAL NO. FROM NOTES: * ITEMS INCLUDED 15

16 Vacuum Shoe

17 Vacuum Shoe REF PART NO. QTY DESCRIPTION ARM, VAC SHOE PARALLEL COVER, ACCESSORY PORT NUT, 1/4-20 HEX NYLOCK SS SCR, X 3/8 HHTR W/STAR SCR, 1/4-20 X.75 PPHMS PHIL SCR, 1/4-20 X 1 FHCS PLTD SPACER, 3/8ODX.058WX.2814,CRS VAC SHOE, 18" SPRING, EXT.38D X2.75L X.055W WASHER, 1/4 ID X 5/8 OD SS WASHER, WAVE 3/8ID X3/4D X GASKET, ACCESSORY PORT SERIAL NO. FROM NOTES: 17

18 Wiring Diagram 18

19 Serial Numbers REF. NO. 1 N/A MODEL: SERIAL # 19

Spare Parts List. ( , , ) Dominator 500 PSI-13 Gallon

Spare Parts List. ( , , ) Dominator 500 PSI-13 Gallon Spare Parts List (1.00-5.0, 1.00-.0, 1.00-9.0) Dominator 500 PSI-13 Gallon From Serial Number (Ref No. 1*) * See Serial Number page or call manufacturer 839900-D 12/05/1 How to Use this Spare Parts List