AIR INNOVATEDTM. Illustrated Parts List for VMAC System. S Cummins 4.5 VR70

Size: px

Start display at page:

Download "AIR INNOVATEDTM. Illustrated Parts List for VMAC System. S Cummins 4.5 VR70"

Arleen Collins
5 years ago
Views:

1 AIR INNOVATEDTM Illustrated Parts List for VMAC System S Cummins 4.5 VR70

3 Illustrated Parts List for VMAC System S Cummins 4.5 VR70 1. Kit Pack List Fastener Pack, Cummins Engine Kit, A Air Intake Kit, A Air to Oil Cooler, Separator Tank, Coalescer Assembly, Blowdown Solenoid Assembly, Compressor Assembly, P Inlet Valve Sub Components, NOTE: Drawings are not to scale. Document Changes and Revisions Checked by Revised Revision Revision Details Eng. Implemented by Tech. Qual. Mech. Elec. A ECN BJG SDM N/A RD AWG 03JUL2018 Fax: Page 1 of 12

4 1. Kit Pack List HOSE, CRIMPED, 1/2 X HOSE, CRIMPED, 1/2 X HOSE, CRIMPED, 3/4 X HOSE, CRIMPED, 3/4 X HOSE, CRIMPED, 3/4 X MANUAL, OWNERS GENERIC, VR70 & ILLUSTRATED PARTS LIST, S COOLER, AIR TO OIL, 24V TANK, SEPARATOR ASSEMBLY, COALESCER CLAMP, MOUNTING BRACKET C, DC-DC CONVERTER, 24V-12V, 100W PIGTAIL, FAN, GT CONROL BOX, GENERIC, GT150, INTERFACE CABLE, S700178/ VALVE, 60PSI MIN PRESSURE CHECK FASTENER PACK, S SYS ID & OP INSTR, S700171/ ASSY, BLOWDOWN SOLENOID 20 A ENGINE KIT, CUMMINS A KIT, AIR INTAKE, 2, 90, 12.5FT 22 A OIL, VR, 1L, HIGH PERFORMANCE 23 A OIL, VR, 4L, HIGH PERFORMANCE 24 P ASSEMBLY, COMPRESSOR Page 2 of 12 Fax:

5 Figure 1 Kit Pack List Fax: Page 3 of 12

6 2. Fastener Pack, FASTPACK, OIL FILL ELBOW, STEEL JIC/JIC SWIVEL, 3/ TEE, RUN, STEEL #12JIC FITTING, MODIFIED FASTENER PACK, TUBING TUBE, TEFLON,PTFE, 3/16"OD X 1/8"ID TUBE, TEFLON,PTFE, 3/16"OD X 1/8"ID LOOM, SPLIT PLASTIC, 1/4, HIGH TEMP X105 LOOM, SPLIT PLASTIC, 1/4, HIGH TEMP TUBE, PTFE, 1/4 OD, DOT Figure 2 Fastener Pack Page 4 of 12 Fax:

7 3. Cummins Engine Kit, A BELT, K PULLEY, CRANK, CUMMINS FASTENER PACK, A FASTPACK, MAIN BRACKET, S BOLT,HHCS,FL,M12 X1.75 X45 C BOLT, SHCS, M8 X 1.25 X 20, GR FASTPACK, COMPRESSOR, S BOLT, SHCS, PL, M8 X 1.25 X ASSY, MAIN BRACKET, S TENSIONER 7C3Z-6B209-D BRACKET, CUMMINS 4.5 Figure 3 Engine Kit Fax: Page 5 of 12

8 4. Air Intake Kit, A HOSE, FLEXIBLE, AIR INTAKE HOSE, ELBOW 2.0 ID X 2.0 OD AIR FILTER, 100CFM, 2.0IN, 90DEG AIR FILTER, 100CFM, 2.0IN, STR HOSE, ELBOW 2.0 ID X 2.0 OD CLAMP, HOSE HS32 Figure 4 Air Intake Kit Page 6 of 12 Fax:

9 5. Air to Oil Cooler, COOLER, #8 ORB PORTS, 1/4 PORT RIVET, ALU, STANDARD, BLIND 1/4" SHROUD, FAN CONN, STRAIGHT, #8 MORB X #8 MJIC ASSY, TEMP SWITCH, GT CONN, STEEL, #8 MORB X 1/2 MNPT VALVE, CHECK, 1/2, CRACK 5PSI CONNECTOR, STEEL NPT-TUBE, 1/2-1/ ASSY, FAN W/ GUARD 11" GT280-24V BOLT,HHCS FL LK PL, M8 X 1.25 X 16 Figure 5 Air to Oil Cooler Fax: Page 7 of 12

10 6. Separator Tank, FITTING, 12ORB -12JIC, STEEL WELDMENT, SEPARATOR BOLT, HHCS G10.9, M6 X 1 X 10 FL PL NIPPLE, STEEL STR THRD, 3/ COVER, SIGHT GLASS PLUG, STEEL, #5 ORB, HEX (VITON-O) 7 A PYREX WINDOW KIT CONN, STRAIGHT, #8 MORB X #8 MJIC OIL FILTER, VR SHORT Figure 6 Separator Tank Page 8 of 12 Fax:

11 7. Coalescer Assembly, ASSEMBLY, SCAVENGE TUBE CONNECT,BRASS NPT-POLY,3/16-1/8 NPT VALVE, SAFETY 200 PSI FILTER HEAD, MACHINING FITTING, 12ORB -12JIC, STEEL ADAPTER OIL SEPARATOR, SPIN-ON Figure 7 Coalescer Assembly Fax: Page 9 of 12

12 8. Blowdown Solenoid Assembly, SCREW, PHMS, M5 X BRACKET, SOLENOID CONNECTOR, BRASS, NPT-POLY, 1/4-3/ MUFFLER, SINTERED EXHAUST, 1/4" VALVE, SOLENOID, N.O., GT150 4-PIN Figure 8 Blowdown Solenoid Assembly Page 10 of 12 Fax:

13 9. Compressor Assembly, P BOLT,SHCS,M8 X 1.25 X 50, G12.9 PLT BOLT,SHCS,M8 X 1.25 X 55, G12.9 PLT CONNECT,BRASS NPT-POLY,3/16-1/8 NPT ELBOW,90, BRASS NPT-POLY, 1/8-3/ PIPE FTG, PLUG SKT HEAD, 1/ ASSY, INLET, 2.0 INTAKE ELBOW, BRASS NPT-POLY, 1/8-1/ O-RING, VITON, 3 1/8 ID X 1/8 9 P BASE ASSY, VR70, 6R P CLUTCH, COMPLETE 6 GROOVE FITTING, 12ORB -12JIC, STEEL PROBE, ASSY, THERMISTOR. GT CONN, STRAIGHT, #8 MORB X #8 MJIC PLUG, STEEL HEX SAE/O-RING PORT NOTE: CLUTCH FASTENERS SHOWN FOR REFERENCE Figure 9 Compressor Assembly Fax: Page 11 of 12

14 10. Inlet Valve Sub Components, PLUG, STEEL HEX SAE/O-RING PORT INLET VALVE, SEAT O-RING, VITON, 2 9/16 ID X 3/ ADAPTER, INLET, 2 5 A KIT, REGULATOR O-RING, VITON, 1 3/8 ID X 3/ O-RING, VITON, 2 3/8 ID X 3/ SCREW, BUTTON HCS, X 5/8 PL Figure 10 Inlet Valve Sub Components Page 12 of 12 Fax:

16 Manufactured by Kipp Road, Nanaimo, B.C., V9X 1R3 Canada

AIR INNOVATEDTM. Illustrated Parts List for VMAC System DM Ford F250 F L Power Stroke Diesel

AIR INNOVATEDTM. Illustrated Parts List for VMAC System DM Ford F250 F L Power Stroke Diesel AIR INNOVATEDTM Illustrated Parts List for VMAC System DM20011 2017+ Ford F250 F550 6.7 L Power Stroke Diesel www.vmacair.com Illustrated Parts List for VMAC System DM20011 DTM70-H, Ford 6.7L F250-F550,