SCX Stage III A / Tier 3 General dimensions

Transcription

1 SCX35003 Stage III A / Tier 3 General diensions (Re R6 8 ar 00 en ds w 1500 ing rad ius ) 7120 Units: R6800 R (Short tail swing radius specification) (Standard specification) Specifications SCX35003 Model Application Liftcrane Max. lifting capacity t Basic boo length (with Haer Head) Basic boo length (with Boo Top) Max. boo length Crane jib length Max. boo + crane jib length Tower length Tower jib length Tower + tower jib length Rope line Front/rear ain dru speeds (*1) Boo hoist dru Tower jib hoist dru Swing speed /in /in /in in1(rp) Travel speed high/low(*2) k/h Gradeability % ( ) Engine With Haer Head 350 x x x (0.86) 0.9 / (17) 0.86 (0.86) 0.9 / (17) Cuins QSL9 (Stage III A / Tier 3) 280/2,000 (380/2,000) Make & odel Rated output kw/in1 (PS/rp) Ground contact pressure kpa (kgf/c2) 136 (1.39) With 18 boo and 350 t hook Operating weight t With Boo Top 180 x (1.38) With 24 boo and 180 t hook Luffing Towercrane 100 x ~60 24~ x (0.86) 0.9 / (17) 152 (1.55) Maxiu tower + tower jib length 100 t hook & 15 t hook With 18 boo and 350 t hook With 24 boo and 180 t hook Maxiu tower + tower jib length 100 t hook & 15 t hook Notes: 1. Rope line speeds vary under load and operating conditions (*1). 2. Travel speed is based on flat, level and fir supporting surface with no load and 18 basic boo (*2). We are constantly iproving our products and therefore reserve the right to change designs and specifications without notice. Units in this catalog are shown under International Syste of Units (SI). The figures in parenthesis are under the older British Gravitational Syste of Units. Illustrations ay include optional equipent and accessories, and ay not include all standard equipent. Standard equipent and accessories ay vary by country and region. Suitoo Heavy Industries Construction Cranes Co., Ltd. has been abbreviated as HSC throughout this catalog. HSC CRANES is a brand of Suitoo Heavy Industries Construction Cranes Co., Ltd. Address inquiries to : 93, HigashiUeno 6choe, Taitoku, Tokyo , Japan Phone: Facsiile: Printed in Japan T.EA314

2 Towards a New Stage of Innovation. Working today to shape toorrow, by building a brand new global outlook. Seeking a new level of perforance for 350 t class crawler cranes. Outstanding work capabilities within a refined copact body, cobined with unsurpassed transportation and assebly efficiency. Designed with the ecoperforance and fuel efficiency required for the future, coupled with exceptional safety and operability. Highperforance to ake any job a breeze, with a level of sophistication for safe and secure working conditions. Introducing the new SCX35003, offering the functions required for shaping toorrow. With power to ipress, the SCX35003 will further boost oentu in a rapidly changing world

3 SCX35003 PERFORMANCE Highperforance and copact. Operating capabilities to suit any worksite. As a new generation of crane, the goal was to develop operating perforance to eet any worksite, and coply with any requireent there. The SCX35003 is built on a copact body with a high level of perforance, ensuring operating capability in tight spaces while also covering a wide range of work areas. As a crane catering to diverse work requireents, the SCX35003 is designed fro the ground up to ake jobs even easier. Short tail swing radius specification Standard Rear end radius with standard specifications Classfirst short tail swing radius specification Spaceefficient with a rear end radius of just 6.8. Optial working conditions, even in tight spaces. Tower boo upper angle liit 88! Sall iniu work radius for close jobs. (with LF specifications) 88 Classfirst short tail swing radius specification The first short tail swing radius specification for the 350 t crane class is available with the SCX This allows for soother operations by reducing the ast overhang when hoisting or lowering the boo. The sae 6.8 rear end swing radius as the counter weight odel eans greater versatility on tight worksites. The short tail swing radius specification is available by siply changing over the bar pendant. A oent liiter provides autoatic detection in this configuration. Note) Certain areas of perforance differ to the standard specification. Copact body for a wide range of jobs Perforance of a 350 t class crane in the sallest body in its class. The SCX35003 is capable of work over a large radius just like its predecessors, and also akes operations close to the crane easier during luffing jobs, by liiting the angle of the tower boo to 88 and tower jib to 74. Versatility with jobs over a sall radius as well as a large radius helps to increase productivity. Ordinary operation ECO ode ECO WINCH MODE Easy to use Noral lever operations autoatically switch to ECO MODE under certain operating conditions (light loads, low engine speed) when the ECO MODE switch is ON. Highspeed work at low engine speeds Swing ode selector switch ECO ode ECO ode is included, which allows highspeed lifting and lowering, as well as boo hoisting and traveling when working with light loads without having to increase the engine speed. This delivers excellent efficiency on highelevation construction sites or work requiring any wire rope replaceents, as well as liiting fuel consuption and noise as engine speed can be kept at a iniu. Swing neutral brake standardization During work requiring the cab to swing (when the swing lever is in the neutral position), the operator ay choose between free or brake ode depending on the work and personal preferences, aking operations so uch soother

4 SCX35003 CONTROL Highprecision jobs, exactly as planned. Reliable control for ore peace of ind. A higher rigidity body and boo, cobined with a lighter tower jib has resulted in drastic iproveents to swing operations. The crane can be operated soothly exactly as the operator would expect, for a supree level of control. This takes the crane s core operations of lifting and traveling to brand new heights. Front winch Boo hoist Rear winch Jib hoist W1 W2 Travel Travel W4 W3 Pup (hoisting) Pup (boo hoisting) Iproveents to cobined control Highrigidity body and boo for unparalleled precision and handling Separating the hydraulic circuits for hoisting and boo hoisting by using two pups eliinates interference when hoisting loads or hoisting the boo at the sae tie, ensuring axiu perforance. Pup tilt is controlled individually to suit the particular job, which liits speed changes when loads increase when using cobined control, for ore predictable operation. This also reduces the engine load and helps to cut back on fuel consuption. In addition to greater rigidity for the lower frae, boo rigidity has also been increased with the use of a wider boo foot and larger diaeter boo aterial. This higher level of rigidity provides an outstanding level of control for highprecision and dependable operating capabilities. The result is faster hoisting and positioning of loads, with inial side deflection and twisting at the front of the crane. The ast syste ensures a ore responsive feel when using the hoisting levers. Control dials Fine speed control dials for operations such as hoisting, lowering, swinging and boo hoisting are positioned in a central location on the left side console. Operations can be adjusted at will to suit the particular job. Left: Boo hoist operation pedal Right: Swing brake operation pedal Swing brake operation pedal A swing brake operation pedal is available to ensure precise swing control under strongwind situations. This allows brake control to be applied when swinging the cab around, resulting in precise swing control even on the harshest of worksites

5 SCX35003 TRANSPORTABILITY Easier selfassebly. Superb transportability brings greater efficiency all around. The SCX35003 offers exceptional perforance and a strealined assebly syste to suit a diverse range of worksites. The transportation and selfassebly syste has been designed to reduce transportation costs, shorten assebly tie and iprove work safety to deliver a higher level of efficiency at any worksite. Foldable type tower jib assebly The tower jib can be assebled on sall worksites. The assebly process can also be copleted with the tower jib beneath the boo. * The foldable type is available when the tower jib is shorter than the boo. * The jib pendant is a ropebased syste. Bar pendant The bar pendant syste is not as affected by twisting or extension and retraction operations, and allows for easier connections and storage within the boo. Foldable type Extending type Reducing transportation costs with a transportation width less than 3 A transportationfriendly body size has been used to cater to changing transportation requireents. With a body width of less than 3 and a total weight of 32 t, the SCX35003 also has a lower frae length of 6.05 is to suit the size of standard dropdeck trailers. Frontrear split frae The crane body (upper structure) can be separated into front and rear sections. The rear frae features a single ast and boo hoist winch structure, eliinating the need to reove any hoisting wires. Installation and reoval of the front and rear fraes uses a hookon and pin joint syste (hydraulic assist pin) for easy positioning, which in turn akes work faster and safer. QuickDraw syste A QuickDraw syste is available for selfinstallation/reoval of the heavy crawler side frae, boo base and lower weights. By using QuickDraw syste, assebly work can be done by helper cranes used to install counter weight. Other assebly work can also proceed at the sae tie, further increasing work efficiency. Raise, install link Designed for ease of transportation and assebly Extend cylinder Raise rear post Retract cylinder Hydraulic rear post backstop The rear post required for luffing tower crane work can be raised hydraulically. Tower cranes are no longer required for the hoisting stages, which eans safer, ore accurate operations. Extending the hydraulic cylinder akes it easier to connect and tension the pendant for supporting the rear post, which drastically reduces assebly tie. [Transportation] Winch ounted within boo Swing cab echanis Boo insert with easier transportation [Assebly] Multiassebly stage onitoring syste Hookon and pin joint syste ast Laterally syetrical counter weight shapes Boo connection pin holding device Pendant rope holding device External hydraulic pup connection for assebly/disassebly 08 09

6 SCX35003 SAFETY Reliable and precise. Advanced safety features for the unexpected. Iproving safety should coe first and foreost. A siple, easytoview interface has been designed to ensure that inforation is provided to the operator in the ost reliable way possible. Various accident prevention functions and ultiple redundant safety devices have also been installed for protection against the unexpected. Work is covered by the utost safety and reliability with a full copleent of advanced safety equipent. Moent liiter display Slows down here Swing liitation area Rear view onitor caera Swing restriction unit Dru and rear view onitor syste The swing restriction unit prevents the crane fro swinging into objects by allowing the swing range to be preset, and notifying the operator of the swing range and autoatically stopping the crane when required. Together with the restricted swing range function, the result is an added level of safety when working in tight areas. A dru and rear view onitor syste is available as an optional extra to help operators better oversee the condition of the winches. Switchable caeras also ake checking each section of the crane easier. 1 Load ratio indicator (%) 2 Engine speed 3 Load ratio (%) 4 Water teperature (engine coolant) 5 Fuel gauge Moent liiter with large screen display A large screen display has been used offering excellent visibility and field of view of any job. A host of ites can be shown, while a siple display layout ensures that inforation is provided to the operator properly. The display has also been designed with an interactive interface to follow any oveent of the crane fro a safety perspective, which helps to liit unintended operations and aintain utost safety Blower condition 7 Airconditioner setting state 8 Warning icons 3 Designed for safe work An auto dru lock is included as standard to detect boo hoisting operations and autoatically apply the lock when the lever is in the neutral position. Various warning alars and data are conveyed to the operator and others nearby with the aid of audible alar functions to reduce the nuber of careless accidents. A skywalk designed for aintenance work and handrails (detachable) are also available as optional extras, to ensure work is conducted as safely as possible. Flat, wide body design The swing frae and crawler upper level height can be arranged flat, and gaps covered with footplates to provide a spacious area to walk on, for added safety. ML Antitwo block A new antitwo block using a lifting height indication device is offered as a standard equipent. When a height restriction is set in advance in the lifting height eter, the slowdown function will kick in as the restricted height is approached to prevent hook overhoist. Together with the antitwo block switch, the lifting height oent liiter provides a redundant level of safety against hook overhoist, leading to iproved safety. Note) This function plays a suppleentary role to the existing oent liiter and use of this equipent alone is prohibited by laws and regulations. Flat work area for added safety Other safety functions and devices Winch dru lock (front, rear) Individual winch operation lever locks Three color percentage indicator Antitwo block Eergency engine stop switch Gate lock lever Handrail (detachable) Auto slowdown device 10 * Photos ay differ to the specifications of available products. 11

7 SCX35003 COMFORT Enhanced visibility and sooth operations for greater cofort peace of ind. Designed to ake the stressful job of operators, ore stressfree and ore cofortable. Excellent visibility is just the start, and with easytouse accessories and an ergonoic control layout, the SCX35003 is designed to ake things sooth. These all help to reduce operator fatigue, while at the sae tie increasing cofort and functionality for axiu perforance, dayin, dayout. SCX35003 ECOLOGY Clean and econoical. Environentallyfriendly for ankind and society. A new greener engine delivers clean power required for our new generation of cranes. This advanced, environentallyfriendly technology ensures a ore pleasant experience for everyone, surrounding towns, well into the future. Fuel consuption has been finetuned for ore econoic operation, which also presents ajor benefits fro a anageent perspective. Powered with a clean engine Powered with an environentallyfriendly engine that is equivalent to EU stage III A and US Tier 3 eissions regulations. A ajor reduction in exhaust gas eissions and a reduction in fuel consuption help to decrease CO2 eissions. The new engine and power train have been engineered to be even ore environentallyfriendly. Clean perforance (EU) PM (g/kwh) Stage I Better visibility in all directions The cab has extrawide windows to iprove visibility in all directions. Green tinted safety glass has been used all round to protect the operator fro UV rays and objects that ay have coe free during operation. The wipers now sweep a greater area to ake work easier, even when working in rain. Tilt cab for better operator visibility The SCX35003 coes with a cab tilt echanis that allows the cab to tilt back up to 15 to ake oving loads at heights easier. The optiu work position suited to the job ensures the best possible operator visibility. For SCX3 odel, Stage III A (Tier 3) engine achine is also available in less regulated area. New engine eission gas (Stage IV, Tier 4 f) is regulated in Japan, USA and Europe and Stage IV(Tier 4 f) Engine requires high grade fuel, engine oil and without aftertreatent odule. Other fuel efficiency technology Stage III A Stage II NOx + HC (g/kwh) Highlyfunctional seat for optiu work position The new seats are designed with the ideal shape for a ore cofortable seating position. The wide range of seat adjustents eans it suits any body shape, for the best work and a relaxing posture. A seat with suspension is available as an optional extra. Seat surface slide 210 Seat surface height adjustent* +60 to 35 Overall seat slide 160 * Seat with suspension: +30 to 30 Wide range of seat adjustents Control levers with dru rotation sensor Control levers are designed for better operation with optiization ade to the pitch, and a winch dru rotation sensor is also included. Any rotation in the winch is conveyed to the operator via the levers, for full control required for precision hoisting jobs. The result is sooth winching where accuracy is vital, such as positioning bolts with the crane. Auto idle stop function Engine speed Miniizes excess fuel consuption during work Auto idle stop function Idle stop Idle stop notice when conditions are et Engine stop Miniizes fuel consuption by idling Engine start Restart engine by using the throttle grip or accelerator pedal A new auto idle stop function is available for energyefficient operation and inial exhaust gas eissions. This prevents unnecessary idling during work to help reduce fuel consuption and liit the level of wear throughout various coponents. There is no ipact on work, as the function stops the engine if the switch is ON and the required conditions are et, and restarts the engine when the accelerator is used. Tie ECO MODE Reducing wastage during light load work, increasing productivity ECO ode (see page 5 for details) ECO ode switch Variable capacity pilot pup Fuel econoy has been iproved drastically when winching up and down with light loads. This design ensures energyefficient operation over repetitive oveents or working with loads at heights. A variable capacity pilot pup has been used to aintain operating pressure. The pup provides the required flow rate to aintain a constant pressure, which liits unnecessary loss while the crane is waiting, and thereby help reduce fuel consuption

8 Excellent support and peace of ind for ongoing work. REMOTE SENSING REMOTE SENSING syste installed as standard Precise onitoring of the crane s operating condition to iniize downtie and ensure accurate aintenance. Keeping achines in the best possible operating condition helps to iprove operating efficiency, while also reducing the tie and cost required for aintenance. Store data on achine conditions and operations, reote anageent (total operating tie anageent, position inforation with GPS, operating condition anageent such as work conditions) Miniize downtie Accurate aintenance Better safety Iage of REMOTE SENSING Utost reliability on work sites There are nuerous ways to easure quality. Reliability that ensures peace of ind during daily operations is just one. HITACHI SUMITOMO has designed the SCX35003 fro early on in the developent stage to deliver enhanced durability and ease of aintenance. Engineered with a safe design for iproving operating capabilities and reducing running costs, HITACHI SUMITOMO cranes have evolved to deliver ore benefits than ever before. Precise achine inforation contributes to efficient operation GPS REMOTE SENSING inforation Custoers Share inforation on crane conditions Even easier aintenance A central layout has been used for inspection equipent, cobined with ore gauge ports and a host of other useful functions. Maintenance has been ade so uch easier with iproveents to engine servicing, and a layout that akes each filter and fan belt a breeze to replace. * Photos ay differ to the specifications of available products