318C, 318C L 318C N. Hydraulic Excavators. Cat turbocharged 3066 T diesel engine

Transcription

1 318C, Hydraulic Excavators Cat turbocharged 3066 T diesel engine Gross power Flywheel power Operating weight range Travel speed Drawbar pull 97 kw/132 hp 94 kw/127 hp to kg 5.2 k/h 195 kn

2 318C, and Hydraulic Excavators Iproved perforance and rugged durability cobine to axiize productivity. Operator Station Rooy and quiet with ergonoic control placeent has excellent sightlines to the work area to help keep operator fatigue low and production up throughout the entire shift. Optional cliate control aintains constant teperature in the cab in both hot and cold weather. pg. 4-5 Multipro Electronic Control Syste An user friendly new onitor that shows a wide variety of useful inforation for achine operation and provides high efficient service data and diagnostic capabilities while axiizing fuel efficiency and perforance. pg. 6 Hydraulics The open-center, two-pup hydraulic syste features pup flow control which iproves fuel efficiency, ensures sooth controllability, reduces sound levels and extends coponent life, through an increased axiu flow. The unique tool control option offers the ability to optiize the achine perforances according to 5 tool specifications, and to set priorities between tools and ipleents for axiized efficiency. pg. 7 Iproved Perforance. Drastically iproved speed, increased horsepower, extended service intervals, a revolutionary Tool Control option and a redesigned operator station lead you to ake the right choice. New feature 2

3 Engine The 318C is powered by the Cat 3066 T engine which coplies with worldwide eissions requireents. This engine includes several design features which enhance perforance, efficiency and reliability. Engine service intervals are increased to 500 hours. pg. 8 Service and Maintenance Longer service intervals and easier aintenance results in better achine availability and lower owning and operating costs. Electronic diagnostics eans increased productivity. pg. 9 Undercarriage and Structure Rugged Caterpillar undercarriage design and proven structural anufacturing techniques assure outstanding durability in the toughest applications, resulting in stability, durability and low aintenance. Standard grease-lubricated tracks extend the undercarriage life. pg. 10 s and Teeth A wide variety of bucket types with aggressive bucket designs take advantage of the 318C s higher power to iprove productivity. pg. 11 Boos and Sticks Built for good perforance and long service life, Caterpillar boos and sticks are large, welded box-section structures with thick, ulti-plate fabrications that resist high stress. Designed-in flexibility to help bring higher production and efficiency to all jobs. pg. 11 Work Tools Ex-factory available s, Multiprocessors, Sorting and Deolition Grapples, Haers and Quick Couplers provide a total solution package to the end-user. pg. 12 Coplete Custoer Service Your Cat dealer offers a wide range of services that can be set up under a custoer support agreeent when you purchase your equipent. The dealer will help you choose a plan that can cover everything fro achine and attachent selection to replaceent. 3

4 Operator Station Designed for cofort and ease of operation

5 Special joysticks for tool control options. Operator work station. This operator work station is quiet with ergonoic control placeent and convenient adjustents, low lever and pedal effort, ergonoic seat design, and highly efficient ventilation. Viewing area. Excellent viewing area through large, wide windows. A large skylight provides upward visibility. The upper front window features parallelogra wiper to provide unobstructed front viewing. The upper left side door window can slide open. The lower window provides visibility to the tracks and the ground next to the achine. The rear window offers a good view behind and to the left, aided by a lower hood profile. Greater control convenience. Each of the controls is positioned within easy reach of the operator. Cab shell. The double wall, pressed cab shell is ounted to the swing frae using viscous ounts for reduced sound and vibrations. Wiper. A standard large wiper for the upper and lower windows offers the selection between continuous and interittent odes and provides a better visibility. Dial throttle. Dial throttle with ten settings for siple, precise repeatable engine speed adjustent. Autoatic cliate control. Optional autoatic cliate control aintains constant teperature in the cab in both hot and cold weather conditions and, at the touch of a switch, the operator can choose between fresh or recirculated air. 1 Multipro Electronic Control Syste. Caterpillar onitor panel includes fuel level, hydraulic oil teperature and engine teperature gauges, achine condition indicators, and operator controls in a single console (refer to Multipro on pg. 6). 2 Joysticks. Joysticks control all ipleents and swing functions with inial effort. This includes 4 switches on each joystick. The integrated joystick consoles adjust to operator preference. Joystick consoles are suspended as part of the seat arrangeent. Special joystick for the tool control option feature odulated switches. 3 Travel controls. Hand or foot actuated travel controls allow the operator to ove the excavator while working the boo, stick and bucket. Hand levers are easily reovable. 4 Activation control lever. Hydraulic activation control lever deactivates hydraulic functions and prevents startup when the operator exits the cab. 5 Suspension seat. The fully adjustable suspension seat includes an ipressive range of cofort features. In addition to fore/aft height and weight adjustents, it also offers wide ar support, headrest and a retractable seat belt. The height adjustent syste of the seat and console allows to adjust the together, while the console height can be also adjusted independently. Moreover, the arrest also has its owns height adjustent echanis, providing good access to control levers. Skylight. A unique large polycarbonate skylight provides very good upward visibility, especially useful in above ground applications. 5

6 Multipro The Multipro anages the engine and hydraulics for axiu perforance and enhanced onitoring capabilities through a new user friendly interface Multipro. It controls state-of-the-art hydraulics and engine perforance for axiized productivity, increased fuel efficiency, and lower eission and sound levels. Copact onitor. The 318C uses a copact onitor that nevertheless shows a variety of inforation. The 318C onitor uses a liquid crystal display, and the dot atrix screen is capable of displaying a wide range of ites, such as written essages. It consists of an 8-key keyboard that akes it user friendly to the operator. Pup Flow and Pressure Settings. The 318C onitor is capable of recording five hydraulic pup flow and hydraulic pressure settings for various tools. This function is very convenient because it eliinates the need to adjust the hydraulics every tie a tool is changed and instantly provides the operator with the correct setting of flow and pressure for each tool. Alert. This onitor is capable of autodiagnostic and is designed to alert an ipending proble to the operator. Filter and Oil Warnings. The onitor provides the nuber of hours that filter and fluids have been used. It also displays filter and oil change warnings when the nuber of hours used reaches the aintenance interval. Languages. In addition to icons, the 318C onitor displays languagebased inforation identifying various functions. 20 different display languages are available. The 318C onitor consists of five areas: 1 Alert indicator 2 Engine speed dial indicator 3 Gauges 4 Message area 5 Key pad 6

7 Hydraulics Fast cycle ties and high bucket and stick forces cobine to axiize your productivity in any job. Easy to operate hydraulics. Cat hydraulics give the 318C exceptional efficiency and controllability unatched in the industry for consistently high perforance in all applications. The 318C easy-to-use hydraulic syste provides autoatic infinite priority selections between swing and boo, axiizing perforance and siplifying operation. Boo and swing priority is adjusted autoatically depending on joystick input, eliinating the need to select the work-ode. This is a unique feature in the arket. Auxiliary Hydraulic Circuits. The new auxiliary hydraulic circuits are electronically controlled, allowing essential paraeters for frequently used hydro-echanical worktools to be pre-recorded. This on-board electrohydraulic syste eliinates the need for anual readjustents to the auxiliary hydraulics, each tie a different tool is used. Hydraulic Pups Cross Sensing Syste. It iproves productivity with faster ipleent speeds and quicker, stronger pivot turns. Hydraulic Cylinder Snubbers. The hydraulic cylinder snubbers at rod end of boo cylinders and both ends of stick cylinders cushion shocks, reduce sound and increase cylinder life, keeping the achine working longer. Controllability. The hydraulic syste offers precise control to the 318C, reducing operator fatigue, iproving operator effectiveness and efficiency, which ultiately translates into enhanced perforance. Boo and Stick Regeneration Circuits. Boo and stick regeneration circuits increase efficiency and reduce cycle ties for higher productivity and lower operating costs. Integrated Tool Control syste. With the tool control (option), the achine is being provided with an electronic additional prograable stackable valve and the ability to optiize the achine perforances according to 5 tool specifications (including settings for electrical relief valve for haer circuit and flow). Flow distribution between ipleents is analyzed and optiized, with the ability to set priority on the tool or the ipleents. This option also includes special joysticks with odulated switches for ediu and high pressure odulation. Hydraulic Oil. Caterpillar hydraulic oil offers axiu protection against rusting, echanical and corrosive wear in all hydraulic systes. Caterpillar biodegradable synthetic ester hydraulic oil is factory-installed as an option. Scheduled Oil Sapling. It allows for scheduled replaceent or repair of coponents before the achine is stopped because of a ajor breakdown. 7

8 Cat 3066 T Engine The six-cylinder turbocharged engine is built for power, reliability and easy aintenance. Cat 3066 T Engine. The 318C is powered by a Cat 3066 T diesel engine, built for world-class perforance and reliability, low aintenance, long life and excellent fuel econoy for low operating costs. The 3066 T engine coplies with Stage 2 EU Eission Directive 97/68/EC. Reliability. The 3066 T engine is reliable, easy to aintain, with lower aintenance cost. The oil filter is located on the top of the engine for easy aintenance. Capacity of the sap and the oil cartridge allows to increase the aintenance intervals fro 250 h to 500 h. Capacity. The capacity of the engine has been increased to 1.4 liter, reducing the engine speed drop during the load ipact, which gives a good engine response during transient cycle. Starting perforance. To avoid white soke during cold starting, the 3066T engine is equipped with an air heater on the inlet anifold. Fuel syste. Efficient direct injection fuel syste eans lower operating cost. Aluinu alloy pistons. Heat resistant aluinu alloy pistons have a short copression height, reducing weight and iproving efficiency. Closed breather (option). For special countries, closed breather circuit is available. Autoatic Engine Control. Autoatic Engine Control (AEC) with convenient one-touch coand. Three-stage control axiizes fuel efficiency and reduces sound levels. First stage AEC: Selected when the AEC indicator on the Multipro panel is OFF. If a no-load or light-load condition continues for ore than 3 seconds, the AEC reduces engine speed by 100 rp. Second stage AEC: Selected when the AEC indicator on the Multipro panel is ON. If a no-load or lightload condition continues for ore than 3 seconds, the AEC reduces engine speed to 1300 rp. Third stage AEC: Pressing the switch on the top of the right hand control joystick when the levers are in neutral position, reduces the engine speed to 1020 rp. If the switch is pressed again or if a control lever is oved, the engine speed returns to its noral level. 8

9 Maxiu uptie Service and Maintenance Extended Service Intervals and Easy access reduce operating costs. Extended Service Intervals. 318C service and aintenance intervals have been extended to reduce achine service tie and increase achine availability. Radiator Copartent. The left rear service door allows easy access to the engine radiator and the oil cooler. A reserve tank and drain cock are attached to the radiator for siplified aintenance. Air Filter Copartent. The air filter features a double-eleent construction for superior cleaning efficiency. When the air cleaner plugs, a warning is displayed on the onitor screen inside the cab. Level Service. The design and layout of the 318C was ade with the service technician in ind. Many service locations are easily accessible at ground level allowing critical aintenance to get done quickly and efficiently. Swing-Out Oil Cooler. The oil cooler swings out horizontally for excellent cleaning (optional equipent). Pup Copartent. A service door on the right side of the upper structure allows ground-level access to the pup and pilot filter. Capsule Filter. The hydraulic return filter, a capsule filter, is situated outside the hydraulic tank. This filter prevents containants fro entering the syste when hydraulic oil is changed and keeps the operation clean. Anti-Skid Punched-Star Plate. Anti-skid punched-star plate covers the top of storage box and upper structure to prevent slipping during aintenance. The plate can be reoved for cleaning. Engine Inspection. Engine can be accessed fro the upper structure or fro under the achine. The engine and pup copartent are separated by a steel wall. Water Separator. Water separator reoves water fro fuel even when under pressure and is located in the battery copartent. Optional water level sensor within cab alar. Handrails and Steps. Larger handrails and steps assist operator in clibing on and off achine. Grease-lubricated Track. Grease lubricated seals protect the track link and deliver long track link pin and bushing inner wear life. Fan Guard. Engine radiator fan is copletely enclosed by fine wire esh, reducing the risk of an accident. Greasing Block. Reote greasing block on the boo and two grease points for the swing bearing deliver grease to hardto-reach locations. Electronic Power Unit Control. Monitor Electronic Power Unit Control has diagnostic capabilities for service technicians use. Dealer service technicians can quickly and easily diagnose and adjust achine coponent axiizing uptie. Filter change inforation available in 20 different languages. Swing-out Oil Cooler. Without using tools, the oil cooler swings out horizontally for excellent cleaning access. Diagnostics and Monitoring. The 318C is equipped with S O S SM sapling ports and hydraulic test ports for the hydraulic syste, engine oil and for coolant. A test connection for the Electronic Technician (ET) is located in the air filter copartent. Radiator Copartent. The left rear service door allows easy access to the engine radiator and the oil cooler. A reserve tank and drain cock are attached to the radiator for siplified aintenance. Caterpillar Product Link syste attachent. It includes a transceiver odule (on-board the achine), office application PC software, and a satellite counications network to track achine hours, location, and warnings. Product Link siplifies aintenance scheduling, fleet anageent, unauthorized achine usage or oveent, and product proble event tracking and diagnosis (PL-201). Bearings. New boo and stick standard bearings only need greasing every 1000 hours. 9

10 Undercarriage and Structure 318C, and structural coponents and undercarriage are the backbone of the achine s durability. Robotic welding. Precision robotic welding helps ensure quality welds. These welds increase rigidity, reduce internal stresses and enhance durability for the chassis and track roller fraes. Heavy-duty chassis design. Heavyduty, odified X-shaped chassis design. Cat undercarriage coponents are purposely oversized to offer heavy-duty perforance and durability. Track Roller Fraes. Robot-welded track roller fraes are press-fored, pentagonal units to deliver exceptional strength and service life. Grease-lubricated Track (GLT). It delivers longer track link and inner bushing life. GLT also reduces travel noise and reduces potential for frozen track joints. Two-speed travel otors. Soother auto shifting two-speed travel otors offer top travel speeds and plenty of pull on slopes or turns. Heavy duty two speed travel drives. Standard heavy duty two speed travel drives offer sooth autoshifting, excellent turnability and high drawbar pull. Easier digging out. The eliination of the ledge at carbody and roller frae juncture reduces aterial build-up and akes digging out easier. Standard idler guards aintain track alignent. Centre section guards are standard. Full length Track Guiding Guards are available for additional protection on side slopes. Main frae. Rugged ain frae is designed for axiu durability and efficient use of aterials. Outer frae utilizes curved side rails, which are die-fored, for excellent unifority and strength throughout the length. Box section channels iprove upper frae rigidity under the cab. Inverted U-channels span the width of the ain frae and are fored, rather than fabricated, for superior strength and reduced weight. Boo tower and ain rails are constructed of solid, high-tensile strength steel plates. Boo foot and engine ount areas reinforced for additional strength. Undercarriage Options. Three undercarriage options, standard (STD), long (L) and narrow (N) allow you to choose the best achine for your application and business needs. Standard Undercarriage. The standard undercarriage is well suited for applications that require frequent repositioning of the achine, have restricted working space, uneven or rocky terrain. Long Undercarriage. The long undercarriage (L) axiizes stability and lift capacity. A long, wide and sturdy undercarriage offers a very stable work platfor. Narrow Undercarriage. The narrow undercarriage (N) provides the best choice when ease of transport is iportant while aintaining excellent lift capacity. 10

11 Boos, Sticks, s and Teeth The 318C has designed-in flexibility to help bring total solution for higher production and efficiency to your jobs ; ; The right cobination for the job. Select the right cobination for the job with your Cat dealer and you ll help ensure top production fro the start. Boos and sticks. Caterpillar excavator boos and sticks are built for perforance and long service life. Large, welded, box-section structures with thick, ulti-plate fabrications in high-stress areas. Construction allows structures to flex and dissipate stresses. Three boos and four sticks. The choice of three application boos and four sticks plus a wide selection of buckets and attachents, eans the 318C offers several cobinations of reach and digging forces for optiu versatility. One-piece boo. One-piece boo for all standard applications. Single Offset boo. Single Offset boo for application requiring excavation work alongside the achine. It is ideal for working under pipes, along walls and in other urban conditions where achine access is difficult. Variable Angle Boo. A new variable angle boo (VA) with a draatically reduced weight, for vertical wall digging, working near obstacles or in tight quarters. The variable geoetry boo offers superb flexibility and versatility in the working envelop. With full extension, the working range gives both axiu dig depth and reach above ground. Equally, when the VA boo is retracted, it can work closer to its tracks, increase lifting capacity and work in confined areas. All hydraulic adjustents to the VA boo angle can be ade fro the cab during a work cycle for true versatility. Short stick. Short stick for ass excavation and axiu breakout force bucket up to Mediu stick. Mediu stick for axiu versatility bucket up to Long stick. Long stick for all standard applications bucket up to Extra long stick. Extra long stick for axiu reach and digging depth. up to Linkage Bearings. New bearing technology has extended the front linkage greasing intervals for all bearings, up to 1000 hours for the boo and stick and up to 100 hours for the bucket. All Cat buckets can be fitted for Caterpillar Quick Coupler. 1 Excavation/Trenching (X). Digs and loads soft to ediu aterials such as clay and earth. Features weld on tip adapters, hardened cutting edge and side bars. 2 Extree Excavation/Trenching (EX). Digs and loads copact/abrasive aterials like earth/rock, sand/clay, sand/gravel, coal, chalk and low abrasion ores. Features bigger ground engaging tools, plus abrasion resistant steel for all wear parts. 3 Rock. Digs and loads ixed earth/rock soils containing high percentage of rock or other abrasive aterials. Features V-spade cutting edge, thicker base and wear surfaces. Tip selection 4 Penetration 5 Penetration Long Life 6 Short 7 Long 8 Heavy Duty Long 9 Heavy Duty Abrasion 10 Heavy Duty Long Life 11 Sharp / Corner Sharp 12 Wide 13 Twin Sharp 14 Long Sharp 15 Penetration Plus 11

12 Tool Control Syste, Quick Couplers and Work-Tools User-friendly, integrated electro-hydraulics ake changing tools easy and quick and allow the operator to focus on efficient work. Tool Control. Five hydraulic pup flow and pressure settings can be preset on the Multipro, eliinating the need to adjust the hydraulics each tie a tool is changed. Selecting the proper setting fro the Multipro s enu instantly provides the operator with the correct aount of flow and pressure for the tool. The unique Cat proportional sliding switches provide odulation to the tool and ake precision work easy. Quick Coupler. Caterpillar Quick Couplers provide quick tool exchange tie while aintaining top achine perforance. The universal Quick Coupler hydraulic circuit avoids difficult and costly retrofitting of Quick Coupler hydraulics and allows usage of the ost frequently used Quick Coupler systes. Ask your Cat dealer for ore specific inforation. The hydraulic version is available in the standard and narrow version and akes it very easy for the operator to switch tools without leaving the cab. The spindle version is a user-friendly echanical version that can later be converted into the hydraulic version if required. The spindle version is also available in the narrow and standard version. A lifting hook can be added to the Quick Coupler for axiu lift capacity. All Cat buckets can be fitted for Caterpillar Quick Coupler. The new Cat CW-Series Quick Couplers ake it possible for the operator to siply release one work tool and pick up the next. Your hydraulic excavators becoe highly versatile. The Cat CW-Series Quick Couplers axiize achine efficiency in a cost-effective way..multi-processor. The Caterpillar Multi-Processors can be equipped with different jaw types depending on your need. Deolition and Sorting Grapple. The deolition and sorting grapple with unliited left and right rotation is the ideal tool for stripping, sorting, handling and loading. Haer. The Cat haers with a wide variety of tools provide the perfect atch for axial life, efficiency and productivity. 12

13 Work Tools Matching Guide When choosing between various work tool odels that can be installed onto the sae achine configuration, consider work tool application, productivity requireents, and durability. Refer to work tool specifications for application recoendations and productivity inforation. 318C Without quick coupler Haers Mechanical Pulverizers Multiprocessor Crushers Pulverizers Mechanical Shears 360 rotatable Shears Mechanical Grapples Deolition and Sorting Grapple H115s H120Cs P115 P120 VMC-30 MP15 CC CR PP PS S VHC-30 VHP-30 S115 VCS-35 VWC-25 VWS-25 S320 S325* G112 G115 VRG shoes shoes shoes shoes shoes 3.2 With quick coupler Quick Coupler Haers Multiprocessor Crushers Pulverizers Mechanical Shears 360 rotatable Shears Mechanical Grapples Deolition and Sorting Grapple CW-30 CW-30S H115s H120Cs MP15 CC CR PP PS S VHC-30 VHP-30 VCS-35 VWC-25 VWS-25 S320 G112 G115 VRG-25 * Boo Mounted 360 Working Range Over the front only Recoended Available Not Copatible 318C, and Hydraulic Excavator specifications 13

14 Engine Cat 3066 T diesel engine Ratings 1800 rp Gross Power 97 kw/132 hp Net Power ISO kw/127 hp EEC 80/ kw/127 hp Bore 102 Stroke 130 Displaceent 6.4 liters Cylinders 6 Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, uffler, and alternator. No engine derating required below 2300 altitude. Meets Stage 2 EU Eission Directive 97/68/EC. Brakes Meets ISO10265:1998 Service and parking brake features wet, ultiple-disc brakes are used on the final drive input shafts spring-applied, hydraulically released actuating a travel control siultaneously releases the brakes when the controls are released, the brakes autoatically apply Hydraulic Syste Main Ipleent Syste Maxiu Flow (2x) 185 l/in Maxiu pressure Ipleents kpa Travel kpa Swing kpa Pilot Syste Maxiu flow 32.5 l/in Maxiu pressure 4100 kpa Cylinders, Bore and Stroke Boo (2) 120 x 1193 Stick (1) 130 x 1364 (1) sall/ediu stick 120 x 1030 long/extra long stick 110 x 1048 Swing Mechanis Hydrostatic with independent planetary reduction. Swing Speed Swing Torque 10.5 rp 48.5 kn Steering Two rocker pedals with detachable hand levers control steering and travel functions. Controls controls are pilot-operated for reduced efforts left pedal and lever control left track; right pedal and lever control right track when idlers are in front, pushing both pedals or levers forward oves the excavator straight ahead when the idlers are in front, rocking both pedals or pulling both levers backward oves the excavator straight back oving one pedal or lever ore than the other, either forward or backward, results in a gradual turn oving one pedal or lever forward and the other pedal or lever backward counter-rotates the tracks for spot turns Cab/FOGS Bolt-on Falling Object Guard Syste (FOGS) is available as an attachent. Cab/FOGS eets ISO Ipleent Controls Two joysticks hand levers actuate boo, Stick, bucket and swing Attachents haer is activated by auxiliary pedal or switch on right side joystick auxiliary hydraulic lines are activated by auxiliary pedal ediu pressure hydraulic lines are activated by switch on left side joystick Drive Drive syste is fully hydrostatic Maxiu Travel Speed Maxiu Drawbar Pull 5.5 k/h 196 kn each track is driven by one independent, autoatic shifting, twospeed axial piston otor via integral planetary final drives each drive odule is well integrated into the roller frae for total protection standard heavy-duty travel drive increase drawbar pull and provide a better turnability. Sound Operator Sound The operator sound level easured according to the procedures specified in ISO 6396 is 76 db(a), for cab offered by Caterpillar, when properly installed and aintained and tested with the doors and windows closed. Exterior Sound The labeled spectator sound power level easured according to the test procedures and conditions specified in 2000/14/EC is 104 db(a) C, and Hydraulic Excavator specifications

15 Diensions All diensions are approxiate. A Shipping height (with bucket)* Short stick 2886 Mediu stick 2904 Long stick 3000 Extra Long stick 3210 B Shipping length Short stick 9000 Mediu stick 8906 Long stick 8820 Extra Long stick 8870 C Tail swing radius 2520 * ay be liited by cab height (K) D Swing ground clearance 1050 E Length to centers of rollers 318C, F Track length 318C, G Shipping width 318C, with 600 shoes 2800 with 500 shoes 2490 H Track gauge 318C, J clearance 465 K Cab height 2950 L Overall width with irrors installed 2925 M Shipping width upper frae 2520 Service Refill Capacities Liters Fuel Tank 320 Cooling Syste 30 Engine Oil 13 Swing Drive 8 Final Drive (each) 13 Hydraulic syste (including tank) 188 Hydraulic tank 105 Operating Weights Machine is equipped with One-piece boo, stick, full fuel tank, operator, bucket (750), versatility and cofort package, quick coupler, quick coupler control group, full length track guiding guards, botto guard, check valves and heavy duty travel drives. Sticks Short Mediu Long Extra long C kg kg kg kg 600 triple grouser triple grouser triple grouser triple grouser triple grouser C, and Hydraulic Excavator specifications 15

16 Undercarriage Based on operating weights. Track width* Pressure 500 triple grouser 58 kpa 600 triple grouser 318C 45 kpa 49 kpa 700 triple grouser 318C 43 kpa 800 triple grouser 35 kpa * Custo product undercarriage are available. Contact your Caterpillar dealer for specifics. Boo, Stick and Copatibility One-piece boo range Extra long stick 0.41 to Long stick 0.41 to Mediu stick 0.41 to Short stick 0.41 to Variable Angle Boo Extra long stick 0.41 to Long stick 0.41 to Mediu stick 0.41 to Short stick 0.41 to Material Densities *kg/ 3 Clay, dry 1500 Clay, wet 1660 Earth, dry 1510 Earth, wet 1600 Loa 1250 Gravel, dry 1510 Gravel, wet 2000 Gravel, pit run 1930 Rock/dirt, 50% 1720 Sand, dry 1425 Sand, wet 1700 Sand and Clay 1600 Stone, crushed 1600 Top soil 950 * Kilogras per loose cubic eter Recoended Maxiu Material Density Width Weight kg Capacity 3 Short stick kg/ 3 Mediu stick kg/ 3 Long stick kg/ 3 Extra long stick kg/ 3 Excavation Extree Excavation Specifications Contact your Caterpillar dealer for special bucket requireents. A Bite width B Tip radius Capacity 3 Weight kg Excavation Extree Excavation Rock A Bite width B Tip radius Capacity 3 Weight kg A B C, and Hydraulic Excavator specifications

17 Working Ranges With One-piece boo Stick Choice of four A Maxiu Digging Depth B Maxiu Reach at Level C Maxiu Cutting Height D Maxiu Loading Height E Miniu Loading Height F Maxiu Digging Depth 2.44 Level Botto G Maxiu Vertical Wall Digging Depth Tip Radius Forces (ISO 6015) Stick Forces (ISO 6015) Short Mediu Long Extra long kn 130 kn 111 kn 112 kn 119 kn 103 kn 88 kn 79 kn Working Ranges With Variable Angle Boo (VA) Stick Choice of four A Maxiu Digging Depth B Maxiu Reach at Level C Maxiu Cutting Height D Maxiu Loading Height E Miniu Loading Height F Maxiu Digging Depth 2.44 Level Botto G Maxiu Vertical Wall Digging Depth Tip Radius Forces (ISO 6015) Stick Forces (ISO 6015) Short Mediu Long Extra long kn 130 kn 111 kn 112 kn 124 kn 106 kn 91 kn 81 kn 318C, and Hydraulic Excavator specifications 17

18 Lift capacities with One-piece boo All weights are in kg 318C Short stick *3320 * *4730 *4730 * *7660 *7660 * * * * * * * * C Mediu stick *2640 * * * *5120 *5120 * * * * * *5310 *5310 * * * * *2880 * * C Long stick *1850 * * *1720 * * * *9510 *9510 * * * * * *5080 * * *4730 *4730 *8650 * * *8740 *8740 * * * * C Extra long stick *2860 *2860 *1600 * *3220 *3220 *1480 * * * *1450 * *7810 *7810 *5380 *5380 * * * * *5140 * * *3850 *3850 *7640 * * *7120 *7120 * * * * * * Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities C, and Hydraulic Excavator specifications

19 Short stick Mediu stick *6110 *6110 *3390 * *6730 *6730 * * * * *7630 *5970 * * * * * * * * * * * * * * * * * * * * * * * *4820 *4820 *2700 * *5550 *5550 * *2490 * *6860 *6860 * * * *9900 *9900 * * * * *9000 * * * * * * * * * * * * * * * * * * * * * * * Long stick *2430 * *4080 *4080 *1890 * *4190 *4190 * *1740 * *4370 *4370 *4940 *4940 * *1700 * * * * * * * * * * * *7630 *7620 *9850 *9850 * * * *9900 *9900 * * * * * *9830 *9830 * * * * * *7910 *7910 Extra long stick *2010 * *3490 *3490 *2750 *2750 *1630 * *3230 *3230 *3430 *3430 *1490 * *3540 *3540 * * *1450 * *9880 *9880 * * * * * * * * *5730 *5730 * * * * * * * *8280 *8280 * * * * * * * * * * * * * Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities. 318C, and Hydraulic Excavator specifications 19

20 Lift capacities with One-piece boo All weights are in kg Short stick Mediu stick *6110 *6110 *3390 * *6730 *6730 * * * * *7630 *5970 * * * * * * * * * * * * * * * * * * * * * * * * * * *4820 *4820 *2700 * *5550 *5550 * *2490 * *6860 *6860 * * * *9900 *9900 * * * * *9000 * * * * * * * * * * * * * * * * * * * * * * * Long stick *2430 * *4080 *4080 *1890 * *4190 *4190 * *1740 * *4370 *4370 *4940 *4940 *4750 *3820 *1700 * * * * * * * * * * * *7630 *7620 *9850 *9850 * * * *9900 *9900 * * * * * *9830 *9830 * * * * * *7910 *7910 Extra long stick *2010 * *3490 *3490 *2750 *2750 *1630 * *3230 *3230 *3430 *3430 *1490 * *3540 *3540 * * *1450 * *9880 *9880 * * *3980 *2390 * * * * * *5730 *5730 * * * * * * *8280 *8280 * * * * * * * * * * * * *9840 *9840 Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities C, and Hydraulic Excavator specifications

21 Short stick *3320 * *4730 *4730 * *7660 *7660 * * * * * * * * Mediu stick *2640 * * * * * * * * *5310 *5310 * * * * * * Long stick *1850 * * *1720 * * * * * * * * * * *5080 * * *4730 *4730 * * *8740 *8740 * * * * Extra long stick *2860 *2860 *1600 * * *1480 * * * * *7810 *7810 * * * * * *5140 * * *3850 *3850 * * *7120 *7120 * * * * * * Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities. 318C, and Hydraulic Excavator specifications 21

22 Lift capacities with One-piece boo All weights are in kg Short stick *3410 * *4780 *4780 * *7670 *7670 *5650 *5650 * * * * * * * * * * * * * Mediu stick *2710 * * * *5140 *5140 * * * * * * * * * * * *5380 *5380 * * * * * * * *3060 * *8490 *8490 Long stick *1900 * * *1760 * * * *1740 * *9490 *9490 * * * * * * *5160 *5160 * * *4790 *4790 *8730 *8730 * * *8820 *8820 * * * * * Extra long stick *2920 *2920 *1640 * *3250 *3250 *1510 * * * *1490 * *7800 *7800 *5390 *5390 * * * * * * *5210 *5210 * * *3910 *3910 *7710 *7710 * * *7180 *7180 * * * * * * * Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities C, and Hydraulic Excavator specifications

23 Short stick *3410 * *4780 *4780 * *7670 *7670 *5650 *5650 * * * * * * * * * * * * * * Mediu stick *2710 * * *2530 * *5140 *5120 * * * * * * * * * * * *5380 *5380 * * * * * * * *3060 * *8490 *8490 Long stick *1900 * *3760 *3760 *1760 * * * *1740 * *9490 *9490 * * * * * * * *5160 *5160 * * *4790 *4790 *8730 *8730 * * *8820 *8820 * * * * *9870 *9870 * Extra long stick *2920 *2920 *1640 * *3250 *3250 *1510 * *3670 *3670 * *1490 * *7800 *7800 *5390 *5390 * * * * * * *5210 *5210 * * * *3910 *3910 *7710 *7710 * * *7180 *7180 * * * * * * * Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities. 318C, and Hydraulic Excavator specifications 23

24 Lift capacities with One-piece boo All weights are in kg Short stick *3410 * *4780 *4780 * *7670 *7670 * * * * * * * Mediu stick *2710 * * * * * * * * *5380 *5380 * * * * * * Long stick *1900 * * *1760 * * * * * * * * * * *5160 * * *4790 *4790 * * *8820 *8820 * * * * Extra long stick *2920 *2920 *1640 * * *1510 * * * * *7800 *7800 * * * * * *5210 * * *3910 *3910 * * *7180 *7180 * * * * * Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities C, and Hydraulic Excavator specifications

25 Lift capacities with Variable Angle boo All weights are in kg Short stick Mediu stick Long stick Extra long stick *6680 *6680 *3480 * *6800 *6800 *7070 *5270 * * * * * * * * * * * * * * * * * *4900 *4900 *2770 * * * * *6890 *6890 * * * * * * *8680 * * * * * * * * * * * * * * * * * * *2490 * *4150 *4150 *1940 * *4240 *4240 * *1780 * *4400 *4400 *4980 *4980 * * * * * * * * * *7680 *7680 * * * * *9970 *9970 * * * * * * * * * * *7880 * *2060 * *3550 *3550 *2810 *2810 *1670 * *3280 *3280 * *1530 * *3580 *3580 * * * * * * * * * *5780 *5780 * * * * *8340 *8340 * * * * * * * * * * Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities. 318C, and Hydraulic Excavator specifications 25