CX17B ZTS CX15B Series 2-CX18B Series 2

Transcription

1 MINI-EXCAVATORS CX17B ZTS CX15B Series 2-CX18B Series 2 CX15B Series 2 CX17B ZTS CX18B Series 2 Engine Horsepower 11.3 kw/15 hp 11.3 kw/15 hp 11.3 kw/15 hp Operating weight 1480 kg 1620 kg 1780 kg Max. digging depth

2 HIGH EFFICIENCY The series 2 range of 1.5 ton achines fro Case features two highly efficient variable displaceent piston pups for power on deand, reducing fuel consuption and increasing perforance. CX17B ZTS and CX18B series 2 achines are also equipped with a gear pup for the swing and rotation circuits, boosting slew speed and cutting cycle ties further. The two-speed travel selector is integrated into the right hand track control lever, for instinctive changes on the ove and faster reaction to changing terrain. Hydraulic power. Boosted perforance. POWER ON DEMAND All 1.5 tonne class Case achines use a new 11.3 kw (15 hp) Mitsubishi engine for axiu efficiency and output. A revised three-post canopy offers easy access and iproved visibility, increasing safety for the operator. New cab option provides suspension seat and high output cab heating syste for total operator cofort. Telene side panels on the series 2 upper structure offer iproved shock resistance and less risk of daage, cutting repair costs and downtie. Evolutionary design. Operator benefits. 2 SAFE AND SECURE New cab and canopy are TOPS and FOPS level 1 rated for axiu operator protection. Revised design provides iproveents in visibility all around the achine, particularly on the left hand side through the cab door. New cab option provides a suspension seat. Both servo hand levers are now fitted with red safety levers to prevent accidental operation, and both the boo swing control and the haer control are protected by locks which provides safety for the operator and other personnel on site. Safe Operation. Reduced downtie.

3 OPERATOR ENVIRONMENT The Case series 2 ini excavators have a totally revised three-post canopy design offering easier access and iproved visibility. There is a choice of fixed or suspension vinyl seats to suit operating conditions. For those opting for a cab the series 2 odels feature a new design with standard heating syste and suspension cloth seat. Larger windows and increased door glass iprove visibility and the low eission engine offers reduced noise levels for the operator. Easy to reach levers and hand and foot controls for the tracks provide a cofortable working environent for the driver. Maxiu cofort. Increased productivity. BUILD QUALITY Robust coponents and design enhance the durability and reliability of the Case ini excavator. Protection for the ain lift cylinder piston and for all greasing points is standard and the bodywork of the achine is constructed fro Telene. This aterial is shock resistant, reducing the need for saller repairs on site and cutting ownership costs. The CX17B ZTS and CX18B series 2 odels have an expandable dozer blade, with a locking syste to prevent daage or loss of parts when the tracks are retracted. Designed to work. Built to perfor. MAXIMISED PROFITABILITY With the adoption of the new engine and variable displaceent hydraulics, the CX15B-18B series 2 achines provide reduced fuel consuption as well as lower eissions. Fully reovable side panels, easy access to the battery, a single key for locks and ignition, and access to all service and aintenance points fro beneath the engine canopy, result in reduced service ties and increased productivity. Buckets fro the previous CX16B and CX18B can be used by the series 2 achines. The CX17B ZTS can also take the CX15B series 2, CX16B and CX18B - CX18B series 2 Klac or Lehnoff buckets if equipped with a specific Klac or Lehnoff quick coupler. This offers integration into existing fleets and lower cost to change for owners. Reduced consuption. Lower ownership costs. 3

4 CX15B SERIES 2 The CX15B series 2 with its fixed chassis and its standard dozer blade is offered in two versions: a 1 speed/canopy/standard seat version and a version that is 2 speed/cab (with heater and suspension cloth seat) or canopy (with a choice of fixed or suspension vinyl seats). Powered by an 11.3 kw Mitsubishi engine, the CX15B series 2 has two variable displaceent hydraulic pups for axiu productivity. A conflux syste allows the unused flow fro one pup to assist the auxiliary flow when selected. That auxiliary circuit can be single or twin directional for a range of powered attachents. Quick disconnects are fitted on the dipper ar. Custoers can also choose between short and long dipper ars to suit their operation. CX15B series 2 takes the buckets fro previous CX16B and CX18B as well as those buckets of the new CX18B series 2. CX18B SERIES 2 The Case CX18B series 2 is offered with a variable width undercarriage and extendable dozer blade as standard equipent. Two speed tracking is included and custoers can opt for the new three-post canopy, with fixed or suspension seats, of a heated full cab with a suspension seat. The 11.3 kw Mitsubishi engine powers a three pup hydraulic syste, using two variable displaceent piston pups and a gear pup for the slew and boo swing functions. The conflux syste utilises unused flow fro this third pup to assist the two ain pups when needed. Single and dual directional auxiliary hydraulics can be supplied with quick connect fittings on the dipper ar. Short and long dippers sticks are available and the achine can use buckets fro the previous CX16B and CX18B, and the new CX15B series 2. CX17B ZTS The all new CX17B ZTS provides a zero tailswing design with a reduced counterweight overhang that can be rotated within the width of the tracks, fully ZTS in canopy version or with inial overhang in cab version for cab protection. Available with a choice of rubber or steel undercarriage, the CX17B ZTS cobines the benefits of zero tailswing and variable width tracks to access the ost confined job sites. Two-speed tracking is standard and the achine is available with the three-post canopy or the heated glazed cab. Both options have a suspension seat as standard. The CX17B ZTS benefits fro the sae Mitsubishi engine and three pup operating syste as the CX18B series 2, with two variable displaceent piston pups and a single gear pup to provide a boost of power when needed. A choice of long or short dipper ars is available and the achine can be ordered with single or dual directional auxiliary hydraulics and dipper ounted quick connects. 4

5 OPERATOR S CAB A redesigned fully glazed cab is available on the CX15B series 2 two-speed tracking odel and on all CX17B ZTS and CX18B series 2 odels. With a heater and suspension seat, the cab offers tilt adjustable ar rests, a glazed roof section for iproved visibility when loading and a windshield that can be easily stowed in the roof of the cab. The lower front window can be stored behind the driver s seat and there is a larger window in the door to further enhance visibility. Reduced width cab pillars also add to the iproved view to all sides of the achine. Ergonoic servo levers, with a two-speed tracking control under the thub of the tracking lever provide the operator with easy to reach, intuitive control of the achine. The swing control and auxiliary control are both protected by a footrest lock to prevent unexpected use, iproving safety and reducing the risk of daage to the achine. Low internal noise levels and plenty of head, ar and leg roo provide a class-leading operator environent. For the full safety of the operator, all cabs and 3 post canopies are equipped with TOPS (tipping over protection syste) and FOPS (falling object protection syste) level 1, plus a safety lap belt. CX18B Series 2 Cabin. Here below: the CX15B Series 2 Canopy operator s standard seat (suspension seat option is available on 2 speed versions). 5

6 ENGINE The new 11.3 kw Mitsubishi engine provides plenty of power for the series 2 achines. Centralised access, with all service points easily reached fro beneath the engine canopy, reduces aintenance tie and cuts service costs. The battery can be accessed fro beneath the bonnet when necessary, further reducing downtie. All liquid checks can be carried out fro ground level for axiu operator safety and rapid start-up each day. HYDRAULICS Highly efficient hydraulic systes, with two variable displaceent pups on all three achines and an additional gear pup on the CX17B ZTS and CX18B series 2, provide axiu flow and pressure when the operator needs it. The hydraulic valves are easily reached for aintenance work, thanks to reovable lightweight Tellene shock proof side panels. The electrical fuses can be found in a clean area beneath the operator s seat, and on the CX17B ZTS and CX18B series 2 achines the switch between the dozer blade operation and blade extension is conveniently located under the seat within easy reach, further reducing downtie and boosting productivity. UNDERCARRIAGE The CX17B ZTS and CX18B series 2 are both provided with variable undercarriage width, to allow the achine to access confined working areas but also to provide axiu stability when digging and loading. There is an extending blade on the CX17B ZTS and CX18B series 2 achines to atch the variable track width. This blade uses a locking syste to prevent daage or loss of parts when the tracks are retracted. The CX15B series 2 coes as standard with a fixed undercarriage and rubber tracks. Track tensioning is easily carried out with a standard grease gun, iniising downtie and axiising productivity. 6

7 7

8 8

9 9

10 SPECIFICATIONS CX15B SERIES 2 WEIGHTS Machine Mass (Canopy) Max 1480 kg Machine Mass (Cab) Max 1700 kg ENGINE Engine Maker/Mode Mitsubishi/L3E Rated Power 11.3 kw/15 hp Rated Speed 2100 rp Cyl. - Stroke Volue c3 Max. Torque rp Fuel Consuption Rate (E/G) 270 g/kw.h Fuel Consuption (Digging) 2.6 l/h Allowable Abient Teperature -15/45 C HYDRAULICS Set Pressure (Att) 20.6 MPa Set Pressure (Travel) 20.6 MPa Set Pressure (Swing) 14.5 MPa Rated Flow Rp 15.5 l/in Rated Flow 2100Rp 15.5 l/in ELECTRICAL SYSTEM Voltage 12 V Alternator Capacity 40 A Starter Motor 1,7 kw Battery 1x40 Ah DIMENSIONS Min. Swing Diaeter 3050 Min. Swing 90 diaeter 2590 Track Gauge 760 Crawler Base 1215 Ground Clearance Of Undercarriage 175 Bucket Capacity (Std) Sae Outside Width Of Bucket (Std) 400 UNDERCARRIAGE Nu. Of Sprocket Teeth 19 Nu. Of Roller (Upp/Low) plate/3 Travel Speed (1St/2Nd Speed ) 2/3.5 k/h Gradability 58% PERFORMANCE Lifting Capacity (Front Direction) 3.1 knx Bucket Digging Force (Iso) 13.3 kn Ar Digging Force (Jis Iso) 7.4 kn Outside Width Of Bucket (Std) 400 Lifting Capacity (Back Direction) 2.9 knx Lifting Capacity (Side Direction) 1.9 knx Boo Speed (Up) 2.2 s Boo Speed (Down) 3.2 s Ar Speed (Crowding) 4.1 s Ar Speed (Pushing) 2.9 s Bucket (Digging) 2.7 s Bucket (Duping) 1.9 s Boo Swing (Left) 4.5 s Boo Swing (Right) 4.5 s Dozer (Up) 1.1 s Dozer (Down) 1.7 s Steady State Swing Speed 9.5 in -1 Swing Gradability Deg 20 Max. Tractive Force (Sae Cal.) 18.3 kn Ground Pressure Cab/Canopy 30/25 kpa Productivity 18 3 /h CAPACITIES Fuel Tank Capacity 19.5 l Coolant Capacity 3.5 l Engine Oil Capacity 3 l Hydraulic Oil (Standard Level) 8.8 l Hydraulic Oil (Tank Capacity) 12.3 l NOISE Acoustic Power Level 93 db Noise At Ear 74 db 10 BUCKETS DIRECT FIT BUCKET OR SPECIFIC BUCKETS FOR KLAC QUICK COUPLER* 250* * 700* DITCH CLEANING 800* 1000* HAMMERS *available through Case parts syste only (non factory). CB18S CB32 CB32P CB32S bp 1300/2500 bp 740/2400 bp 750/2400 bp 750/2400 SPIKES Standard chisel (L480) Long chisel (L560) Standard oil point (L480) Long oil point (L560) AUGERS Length 1200 Diaeter Extensions Parallel spade (L480) Traverse Spade Copacting plate

11 GENERAL DIMENSIONS CX15B SERIES 2 DIPPER LENGTH A Overall height B Overall length C Width of upperstructure D Track overall length E Track overall width F Track shoe width G Center to center (idler to sprocket) H Upperstructure ground clearance J Backfill blade height Working weight Ground pressure Tail swing radius Swing angle - right - left kg kpa CX15B Cab CX15B Canopy

12 PERFORMANCE DATA CX15B SERIES 2 WITH 1.75 STANDARD MONOBOOM DIPPER LENGTH A Maxiu digging depth B Maxiu height of cutting edge C Maxiu vertical digging depth D Maxiu duping height E Miniu duping height F Maxiu cutting radius G Maxiu digging radius at ground level H Miniu swing radius of attachent Ar digging force Bucket digging force Values are identical for Cab or canopy versions kn kn

13 LIFTING CAPACITY CX15B Series 2 - WITH 1.75 STANDARD MONOBOOM Front 360 Values are expressed in kg REACH At ax reach dipper, CAB, DOZER DOWN, rubber shoes and bucket of dipper, CAB, DOZER DOWN, rubber shoes and bucket of The above values are in copliance with nor SAE J/ISO They do not exceed 87% of the hydraulic lift capacity (*if indicated) or 75 % of tipping load, with an 80 kg operator in seat. 13

14 LIFTING CAPACITY CX15B Series 2 - WITH 1.75 STANDARD MONOBOOM Front 360 Values are expressed in kg REACH At ax reach dipper, CANOPY, DOZER DOWN, rubber shoes and bucket of dipper, CANOPY, DOZER DOWN, rubber shoes and bucket of The above values are in copliance with nor SAE J/ISO They do not exceed 87% of the hydraulic lift capacity (*if indicated) or 75 % of tipping load, with an 80 kg operator in seat. 14

15 15

16 SPECIFICATIONS CX17B ZTS ENGINE Model Mitsubishi L3E-W231KBS Cylinders 3 Bore/Stroke 76 x 70 Displaceent 952 cc Fuel injection Direct Fuel injection pup Mechanical Fuel Diesel Fuel filter Full flow Cooling Liquid Horsepower per ISO kw/ rp Maxiu torque rp HYDRAULIC SYSTEM Pups (2) Variable displaceent piston pup Capacity axiu 2 x 16.3 l/in Syste relief pressure Standard 21.6 MPa Pilot control hydraulic syste Pup (1) Gear pup Maxiu capacity 6 l/in Relief pressure 3.5 MPa Control valves 9 function ultiple control valve. Pup 1 for right travel and bucket function. Pup 2 for left travel, house swing, and ar function. Pup 3 for boo center swing. Pup 4 for pilot valve Swing Motor (1) Fixed displaceent axial piston design Speed rp Tail swing radius 660 Tail swing overhang (in canopy version) 0 Tail swing overhang (in cab version) 95 Travel Motor (2) Two-speed axial piston design Final drive Planetary gear reduction Travel Speeds Forward/Reverse Low 2.0 k/h High 4.0 k/h ELECTRICAL SYSTEM Voltage 12 V Alternator 20 Ap Batteries (1) 40 V Heavy-duty DIMENSIONS Track Gauge (closed) 990 Track Gauge (opened) 1320 UNDERCARRIAGE Nuber of rollers Top, each track 0 Botto, each track 3 Gradability 58% (30 ) CIRCUIT AND COMPONENT CAPACITIES Hydraulic tank Refill capacity 9 l Total syste 15 l Engine w/filter change 3.5 l Fuel 22 l Radiator 3.7 l OPERATING WEIGHT Canopy version With 75 kg operator, 30 kg bucket, full fuel and standard equipent, 0,98 dipper 1620 kg Ground pressure 27.5 kpa Cab version With 75 kg operator, 30 kg bucket, full fuel and standard equipent, 0,98 dipper in cab version 1730 kg Ground pressure 28.8 kpa BUCKETS DIRECT FIT BUCKET OR SPECIFIC BUCKETS FOR KLAC QUICK COUPLER* 250* * 700* DITCH CLEANING 800* 1000* HAMMERS *available through Case parts syste only (non factory). CB18S CB32 CB32P CB32S bp 1300/2500 bp 740/2400 bp 750/2400 bp 750/2400 SPIKES Standard chisel (L480) Long chisel (L560) Standard oil point (L480) Long oil point (L560) Parallel spade (L480) Traverse Spade Copacting plate 16

17 GENERAL DIMENSIONS CX17B ZTS WITH 1.75 STANDARD MONOBOOM DIPPER LENGTH A B C D E F G H J K Overall height Overall length Width of upperstructure Track overall length Track overall width w/230 shoes - retracted Track overall width w/230 shoes - expanded Track shoe width 230 Center to center (idler to sprocket) Upperstructure ground clearance Miniu ground clearance L Tail swing radius - Canopy version Tail swing radius - Cab version M Backfill blade height Working weight - Canopy version Working weight - Cab version Ground pressure Tail swing overhang - Canopy version Tail swing overhang - Cab version Swing angle - right - left kg kg kpa

18 PERFORMANCE DATA CX17B ZTS WITH 1.75 STANDARD MONOBOOM F G H B D E 0 A C DIPPER LENGTH A Maxiu digging depth B Maxiu height of cutting edge C Maxiu vertical digging depth D Maxiu duping height E Miniu duping height F Maxiu cutting radius G Maxiu digging radius at ground level H Miniu swing radius of attachent Ar digging force Bucket digging force * For Canopy version kn kn /3680* 3410/3880* /2650* 2440/2850*

19 LIFTING CAPACITY CX17B ZTS - WITH 1.75 STANDARD MONOBOOM Front 360 Values are expressed in kg REACH At ax reach dipper, CANOPY, DOZER DOWN, 230 shoes and bucket of Crawler ax width 340* 340* 310* 310* 320* * 330* * * 560* 540* * * * * * * * 1040* 970* * * * 500* 340* 340* dipper, CANOPY EXTRA-COUNTERWEIGHT (80 kg), DOZER DOWN, 230 shoes and bucket of Crawler ax width 340* 340* 310* 310* 320* * 370* * * 640* 540* * * * * * * * 1040* 970* * * * 500* 340* 340* dipper, CANOPY, DOZER DOWN, 230 shoes and bucket of Crawler ax width 290* * * * 330* 300* * * * * * * 460* 880* * * * * 830* 1060* * * * 160* 1300* 1300* 680* * * dipper, CANOPY EXTRA-COUNTERWEIGHT (80 kg), DOZER DOWN, 230 shoes and bucket of Crawler ax width * * * * 330* 300* * * * * * * 460* 880* * * * * 830* 1060* * * * 190* 1300* 1300* 680* * * The above values are in copliance with nor SAE J/ISO They do not exceed 87% of the hydraulic lift capacity (*if indicated) or 75 % of tipping load, with an 80 kg operator in seat. 19

20 LIFTING CAPACITY CX17B ZTS - WITH 1.75 STANDARD MONOBOOM Front Values are expressed in kg REACH dipper, CAB, DOZER DOWN, 230 shoes and bucket of Crawler ax width * 230* 370* * * * * * * * * * * 600* 910* * * * * 930* 1090* * * * * 1290* 880* * * * 530* 360* 360* 1.20 dipper, CAB, DOZER DOWN, 230 shoes and bucket of Crawler ax width * * * * * * * * * * * * * * * 470* 840* * * * * 740* 1120* * * * * 1060* 990* * * * 1400* 710* * 380 The above values are in copliance with nor SAE J/ISO They do not exceed 87% of the hydraulic lift capacity (*if indicated) or 75 % of tipping load, with an 80 kg operator in seat. 20

21 21

22 SPECIFICATIONS CX18B SERIES 2 WEIGHTS Machine Mass (Canopy) Max 1560 kg Machine Mass (Cab) Max 1780 kg ENGINE Engine Maker/Model Mitsubishi/L3E Rated Power 11.3 kw/15 hp Rated Speed 2100 rp Cyl. - Stroke Volue c 3 Max. Torque rp Allowable Abient Teperature -15/45 C Fuel Consuption Rate (E/G) 270 g/kw.h Fuel Consuption (Digging) 2.6 l/h HYDRAULICS Set Pressure (Att) 21.6 MPa Set Pressure (Travel) 21.6 MPa Set Pressure (Swing) 14 MPa Rated Flow 2100 Rp 15.5 l/in Rated Flow Rp 10.9 l/in ELECTRICAL SYSTEM Voltage 12 V Alternator Capacity 40 A Starter Motor 1,7 kw Battery 1x40 Ah DIMENSIONS Bucket Capacity (Std) Sae Outside Width Of Bucket (Std) 400 Min. Swing Diaeter 3050 Min. Swing 90 diaeter 2590 Track Gauge (closed) 760 Track Gauge (opened) 1100 Crawler Base 1215 Ground Clearance Of Undercarriage 175 UNDERCARRIAGE Nu. Of Sprocket Teeth 19 Nu. Of Roller (Upp/Low) plate/3 Gradability 58% Travel Speed (1St/2Nd Speed) 2/3.5 k/h PERFORMANCE Bucket Digging Force (Iso) 14 kn Ar Digging Force (Jis Iso) 7.8 kn Outside Width Of Bucket (Std) 400 Lifting Capacity (Front Direction) 3.3 knx Lifting Capacity (Back Direction) 3.3 knx Lifting Capacity (Side Direction) 3.2 knx Boo Speed (Up) 2.2 s Boo Speed (Down) 2.1 s Ar Speed (Crowding) 2.6 s Ar Speed (Pushing) 2.4 s Bucket (Digging) 2.9 s Bucket (Duping) 2 s Boo Swing (Left) 4.7 s Boo Swing (Right) 4.7 s Dozer (Up) 1.5 s Dozer (Down) 2 s Productivity 20 3 /h Ground Pressure Cab/Canopy 31/27 kpa Steady State Swing Speed 9 rp Swing Gradability Deg 20 Max. Tractive Force (Sae Cal.) 19.2 kn CAPACITIES Fuel Tank Capacity 19.5 l Coolant Capacity 3.5 l Engine Oil Capacity 3 l Hydraulic Oil (Standard Level) 8.8 l Hydraulic Oil (Tank Capacity) 12.3 l NOISE Acoustic Power Level 93 db Noise At Ear 74 db 22 BUCKETS DIRECT FIT BUCKET OR SPECIFIC BUCKETS FOR KLAC QUICK COUPLER* 250* * 700* DITCH CLEANING 800* 1000* HAMMERS *available through Case parts syste only (non factory). CB18S CB32 CB32P CB32S bp 1300/2500 bp 740/2400 bp 750/2400 bp 750/2400 SPIKES Standard chisel (L480) Long chisel (L560) Standard oil point (L480) Long oil point (L560) AUGERS Length 1200 Diaeter Extensions Parallel spade (L480) Traverse Spade Copacting plate

23 GENERAL DIMENSIONS CX18B SERIES 2 WITH 1.75 STANDARD MONOBOOM DIPPER LENGTH A Overall height B Overall length C Width of upperstructure D Track overall length E Track overall width F Track shoe width G Center to center (idler to sprocket) H Upperstructure ground clearance J Backfill blade height Working weight Ground pressure Tail swing radius Swing angle - right - left kg kpa CX18B Cab CX18B Canopy / / / /

24 PERFORMANCE DATA CX18B SERIES 2 WITH 1.75 STANDARD MONOBOOM DIPPER LENGTH A Maxiu digging depth B Maxiu height of cutting edge C Maxiu vertical digging depth D Maxiu duping height E Miniu duping height F Maxiu cutting radius G Maxiu digging radius at ground level H Miniu swing radius of attachent Ar digging force Bucket digging force Values are identical for Cab or canopy versions kn kn

25 LIFTING CAPACITY CX18B Series 2 - WITH 1.75 STANDARD MONOBOOM Front 360 Values are expressed in kg REACH At ax reach dipper, CAB, DOZER DOWN, rubber shoes and bucket of 400 Crawler ax width dipper, CAB, DOZER DOWN, rubber shoes and bucket of 400 Crawler ax width The above values are in copliance with nor SAE J/ISO They do not exceed 87% of the hydraulic lift capacity (*if indicated) or 75 % of tipping load, with an 80 kg operator in seat. 25

26 LIFTING CAPACITY CX18B Series 2 - WITH 1.75 STANDARD MONOBOOM Front 360 Values are expressed in kg REACH At ax reach dipper, CANOPY, DOZER DOWN, rubber shoes and bucket of 400 Crawler ax width dipper, CANOPY, DOZER DOWN, rubber shoes and bucket of 400 Crawler ax width The above values are in copliance with nor SAE J/ISO They do not exceed 87% of the hydraulic lift capacity (*if indicated) or 75 % of tipping load, with an 80 kg operator in seat. 26

27 27

28 CX17B ZTS CX15B-CX18B Series 2 STANDARD EQUIPMENT & OPTIONS STANDARD EQUIPMENT Mitsubishi 11,3 kw engine Hand and foot controlled travel ar Fixed seat with tiltable ar rests and Case logo 3 post canopy or cab with heater One (cab) or 2 (canopy) red safety access levers STANDARD "CX15B Series 2-1 speed " 1 speed 2 pup variable flow hydraulics with conflux 3 post canopy Fixed seat with tiltable ar rests and Case logo Rubber tracks OPTION: auxiliary hydraulic circuit STANDARD "CX15B Series 2-2 speed " 2 speed 2 pup variable flow hydraulics with conflux 3 post canopy with Fixed vinyl seat with tiltable ar rests or Suspension vinyl seat with adjustable ar rests or Cab (with heater and suspension cloth seat) Rubber tracks OPTION: auxiliary hydraulic circuit Standard and optional equipent shown can vary by country. STANDARD "CX18B Series 2" Variable hydraulic tracks with expandable blade 2 speed 3 pup hydraulics (2 variable + 1 gear pup) with conflux 3 post canopy with fixed vinyl seat with tiltable ar rests or Suspension vinyl seat with adjustable ar rests or Cab (with heater and suspension cloth seat) Rubber tracks Optional auxiliary hydraulic circuit STANDARD "CX17B - zts" Variable hydraulic tracks Zero tail swing 2 speed 3 pup hydraulics (2 variable + 1 gear pup) with conflux 3 post canopy with suspension vinyl seat or Cab (with heater and suspension cloth seat) Rubber or steel tracks Auxiliary hydraulic circuit For No. IR1304CCGB - Printed in Italy - MediaCross Firenze - 05/11 CNH INTERNATIONAL SA Riva Paradiso, Paradiso SWITZERLAND NOTE: Standard and optional fittings can vary according to the deands and specific regulations of each country. The illustrations ay include optional rather than standard fittings - consult your Case dealer. Furtherore, CNH reserves the right to odify achine specifications without incurring any obligation relating to such changes. Confors to directive 98/37/CE