CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
|
|
- Meghan McDaniel
- 5 years ago
- Views:
Transcription
1 SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross) 92.7 kw (124 HP) at 1,950 rpm J1349 (net) 87 kw (116 HP) at 1,950 rpm 6271/1 (gross) 92.7 kw (126 PS) at 1,950 rpm 6271/1 (net) 87 kw (118 PS) at 1,950 rpm 54.0 kgf m (391 lbf ft) at 1,400 rpm Max. torque Bore stroke mm ( ) Piston displacement 4,400 cc (268.5 cu in) Batteries 2 12 V 100 Ah Starting motor 24 V kw Alternator 24 V A HYDRAULIC SYSTEM MAIN PUMP Variable displacement tandem axis piston Type pumps Max. flow l/min (33.5 US gpm / 27.9 UK gpm) Sub-pump for pilot circuit Gear pump Cross-sensing and fuel saving pump system HYDRAULIC MOTORS Two speed axial pistons motor with Travel brake valve and parking brake Swing Axial piston motor with automatic brake RELIEF VALVE SETTING Implement circuits Travel Power boost (boom, arm, bucket) Swing circuit Pilot circuit Service valve HYDRAULIC CYLINDERS No. of cylinder bore stroke 350 kgf/cm 2 (4,980 psi) 350 kgf/cm 2 (4,980 psi) 380 kgf/cm 2 (5,410 psi) 285 kgf/cm 2 (4,050 psi) 40 kgf/cm 2 (570 psi) Installed Boom: ,105 mm (4.1 X 43.5 ) : ,138 mm (4.5 X 44.8 ) Bucket: mm (3.9 X 33.1 ) Dozer Blade: mm (3.9 x 9.8 ) 2-Piece Boom: 1st: x 995 mm (4.1 x 39.2 ) 2nd: x 613 mm (5.7 x 24.1 ) DRIVES & BRAKES Drive method Fully hydrostatic type Drive motor Axial piston motor, in-shoe design Reduction system Planetary reduction gear Max. drawbar pull 12,000 kgf (26,455 lbf) Max. travel speed (high / low) 5.5 km/hr (3.4 mph) / 3.3 km/hr (2.1 mph) Gradeability 35 (70%) Parking brake Multi wet disc CONTROL Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Two joysticks with one safety lever Pilot control (LH): Swing and arm (RH): Boom and bucket (ISO) Traveling and steering Two levers with pedals Engine throttle Electric, Dial type SWING SYSTEM Swing motor Swing reduction Swing bearing lubrication Swing brake Swing speed Fixed displacement axial piston motor Planetary gear reduction Grease-bathed Multi wet disc 11.2 rpm SERVICE REFILL CAPACITIES ( ): option Re-filling liter US gal UK gal Fuel tank Engine coolant Engine oil Swing device 3.5 (2.5) 0.9 (0.7) 0.7 (0.5) Final drive (each) Hydraulic system (including tank) Hydraulic tank DEF/AdBlue tank UNDERCARRIAGE The X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing springs and sprockets and a track chain with double or triple grouser shoes. Center frame X - leg type Track frame Pentagonal box type No. of shoes on each side 47 EA No. of carrier roller on each side 2 EA No. of track roller on each side 7 EA No. of rail guard on each side 1 EA OPERATING WEIGHT (APPROXIMATE) Operating weight, including 4,600 mm (15 1 ) boom; mm arm; SAE heaped 0.52 m 3 (0.68 yd 3 ) bucket, lubricant, coolant, full fuel tank, full hydraulic tank and all standard equipments. OPERATING WEIGHT Shoes Operating weight pressure Type Width mm (in) kg (lb) kgf/cm 2 (psi) HX145LCR 14,950 (32,960) 0.45 (6.40) 500 (20 ) HX145LCR (Dozer type) 15,750 (34,720) 0.47 (6.68) HX145LCR 15,160 (33,420) 0.38 (5.40) Triple 600 (24 ) grouser HX145LCR 15,960 (35,190) 0.40 (5.69) (Dozer type) HX145LCR 15,370 (33,880) 0.33 (4.69) 700 (28 ) HX145LCR (Dozer type) 16,170 (35,650) 0.35 (4.98) 1
2 BUCKET SELECTION GUIDE & DIGGING FORCE BUCKETS All buckets are welded with high-strength steel. SAE heaped 0.23 (0.30) 0.40 (0.52) 0.52 (0.68) 0.65 (0.85) 0.71 (0.93) 0.45 (0.59) 0.55 (0.72) m 3 (yd 3 ) 0.46 (0.60) 0.58 (0.76) SAE heaped m 3 (yd 3 ) CECE heaped Without side cutters Width mm (in) With side cutters Weight kg (lb) 1,900 (6 3 ) Recommendation mm (ft.in) 4,600 (15 1 ) Mono-boom 3,000 (9 10 ) 4,900 (16 1 ) 2-Piece boom (6 11 ) 0.23 (0.30) 0.20 (0.26) 520 (20.5) 620 (24.4) 335 (740) 0.40 (0.52) 0.35 (0.46) 750 (29.5) 850 (33.5) 410 (900) 0.46 (0.60) 0.40 (0.52) 840 (33.1) 940 (37.0) 435 (960) 0.52 (0.68) 0.45 (0.59) 915 (36.0) 1,015 (40.0) 460 (1,010) (0.76) 0.50 (0.65) 1,000 (39.4) 1,100 (43.3) 480 (1,060) (0.85) 0.55 (0.72) 1,105 (43.5) 1,205 (47.4) 500 (1,100) (0.93) 0.60 (0.78) 1,190 (46.9) 1,290 (50.8) 540 (1,190) (0.59) 0.40 (0.52) 1,520 (59.8) (900) (0.72) 0.45 (0.59) 1,800 (70.9) (1,290) - Ditching bucket Slope finishing bucket : Applicable for materials with density of 2,000 kg /m 3 (3,370 lb/ yd 3 ) or less : Applicable for materials with density of 1,600 kg /m 3 (2,700 lb/ yd 3 ) or less : Applicable for materials with density of 1,100 kg /m 3 (1,850 lb/ yd 3 ) or less ATTACHMENT Booms and arms are welded with a low-stress, full-box section design. 4.6 m (15 1 ) Mono-boom and 4.9 m (16 1 ) 2-Piece boom and 1.9 m (6 3 ); 2.1 m ; 2.5 m & 3.0 m (9 10 ) s are available. DIGGING FORCE Length Weight mm (ft.in) 1,900 (6 3 ) 3,000 (9 10 ) kg (lb) 560 (1,230) 580 (1,280) 610 (1,340) 670 (1,480) Remarks: kn 87.3 [94.8] 87.3 [94.8] 87.3 [94.8] 87.3 [94.8] Bucket digging force SAE kgf 8,900 [9,660] 8,900 [9,660] 8,900 [9,660] 8,900 [9,660] lbf 19,620 [21,300] 19,620 [21,300] 19,620 [21,300] 19,620 [21,300] kn 102 [110.8] 102 [110.8] 102 [110.8] 102 [110.8] ISO kgf 10,400 [11,290] 10,400 [11,290] 10,400 [11,290] 10,400 [11,290] lbf 22,930 [24,890] 22,930 [24,890] 22,930 [24,890] 22,930 [24,890] kn 76.5 [83.1] 73.6 [79.9] 62.8 [68.2] 55.9 [60.7] [ ]: Power Boost crowd force SAE kgf 7,800 [8,470] 7,500 [8,140] 6,400 [6,950] 5,700 [6,190] lbf 17,200 [18,670] 16,530 [17,950] 14,110 [15,320] 12,570 [13,640] kn 80.4 [87.3] 77.5 [84.1] 65.7 [71.4] 57.9 [62.8] ISO kgf 8,200 [8,900] 7,900 [8,580] 6,700 [7,270] 5,900 [6,410] lbf 18,080 [19,630] 17,420 [18,910] 14,770 [16,040] 13,010 [14,120] Note : weight includes bucket cylinder, linkage and pin 2
3 DIMENSIONS & WORKING RANGE HX145LCR DIMENSIONS 4.6 m (15 1 ) Mono-boom and 2.1 m, 2.5 m & 3.0 m (9 10 ). A Tumbler distance 3,090 (10 2 ) B Overall length of crawler 3,798 (12 4 ) C clearance of counterweight 930 (3 1 ) D Tail swing radius 1,500 (4 11 ) D Rear-end length 1,500 (4 11 ) E Overall width of upperstructure F Overall of cab 2,900 (9 6 ) G Min. ground clearance 440 (1 5 ) H Track gauge 2,000 (6 7 ) I Overall of guardrail 3,215 (10 7 ) J K L M Overall length Overall of boom Track shoe width Overall width 1,900 (6 3 ) 7,380 (24 3 ) 2,630 (8 8 ) 500 (20 ) 7,400 (24 3 ) 2,710 (8 11 ) 4,600 (15 1 ) 600 (24 ) 2,600 (8 6 ) 7,360 (24 2 ) 2,860 (9 5 ) 3,000 (9 10 ) 7,300 (23 11 ) 3,210 (10 6 ) 700 (28 ) 2,700 (8 10 ) HX145LCR WORKING RANGE 4,600 (15 1 ) 1,900 (6 3 ) 3,000 (9 10 ) A 7,730 (25 4 ) 7,900 (25 11 ) 8,310 (27 3 ) 8,770 (28 9 ) A on ground 7,580 (24 10 ) 7,750 (25 0 ) 8,170 (26 10 ) 8,630 (28 4 ) B 4,890 (16 1 ) 5,100 (16 9 ) 5,500 (18 1 ) 5,990 (19 8 ) B (8 level) 4,640 (15 3 ) 4,870 (16 0 ) 5,290 (17 4 ) 5,810 (19 1 ) C Max. vertical wall digging depth 4,400 (14 5 ) 4,600 (15 1 ) 5,000 (16 5 ) 5,400 (17 9 ) D Max. digging 8,840 (29 0 ) 8,970 (29 5 ) 9,350 (30 8 ) 9,730 (31 11 ) E Max. dumping 6,350 (20 10 ) 6,470 (21 3 ) 6,850 (22 6 ) 7,230 (23 9 ) F Min. front swing radius 1,860 (6 1 ) 2,030 (6 8 ) 1,980 (6 6 ) 2,260 (7 5 ) 3
4 DIMENSIONS & WORKING RANGE HX145LCR (DOZER TYPE) DIMENSIONS 4.6 m (15 1 ) Mono-boom and 1.9 m (6 3 ), 2.1 m, 2.5 m & 3.0 m (9 10 ). A Tumbler distance 3,090 (10 2 ) B Overall length of crawler 3,798 (12 4 ) C clearance of counterweight 930 (3 1 ) D Tail swing radius 1,500 (4 11 ) D Rear-end length 1,500 (4 11 ) E Overall width of upperstructure F Overall of cab 2,900 (9 6 ) G Min. ground clearance 440 (1 5 ) H Track gauge 2,000 (6 7 ) I clearance of blade up 420 (1 4 ) N Depth of blade down 430 (1 4 ) O Height of blade 575 (1 8 ) P Overall of guardrail 3,215 (10 7 ) J K L M Overall length Overall of boom Track shoe width Overall width 1,900 (6 3 ) 7,840 (25 9 ) 2,630 (8 8 ) 500 (20 ) 7,860 (25 9 ) 2,710 (8 11 ) 4,600 (15 1 ) 600 (24 ) 2,600 (8 6 ) 7,820 (25 8 ) 2,860 (9 5 ) 3,000 (9 10 ) 7,760 (25 6 ) 3,210 (10 6 ) 700 (28 ) 2,700 (8 10 ) HX145LCR (DOZER TYPE) WORKING RANGE 4,600 (15 1 ) 1,900 (6 3 ) 3,000 (9 10 ) A 7,730 (25 4 ) 7,900 (25 11 ) 8,310 (27 3 ) 8,770 (28 9 ) A on ground 7,580 (24 10 ) 7,750 (25 0 ) 8,170 (26 10 ) 8,630 (28 4 ) B 4,890 (16 1 ) 5,100 (16 9 ) 5,500 (18 1 ) 5,990 (19 8 ) B (8 level) 4,640 (15 3 ) 4,870 (16 0 ) 5,290 (17 4 ) 5,810 (19 1 ) C Max. vertical wall digging depth 4,400 (14 5 ) 4,600 (15 1 ) 5,000 (16 5 ) 5,400 (17 9 ) D Max. digging 8,840 (29 0 ) 8,970 (29 5 ) 9,350 (30 8 ) 9,730 (31 11 ) E Max. dumping 6,350 (20 10 ) 6,470 (21 3 ) 6,850 (22 6 ) 7,230 (23 9 ) F Min. front swing radius 1,860 (6 1 ) 2,030 (6 8 ) 1,980 (6 6 ) 2,260 (7 5 ) 4
5 DIMENSIONS & WORKING RANGE HX145LCR 2-PIECE DIMENSIONS 4.9 m (16 1 ) 2-piece boom and 2.1 m, 2.5 m, 3.05 m (10 0 ) & 3.6 m (11 10 ). A Tumbler distance 2,910 (9 7 ) B Overall length of crawler 3,618 (11 8 ) C clearance of counterweight 930 (3 1 ) D Tail swing radius 1,500 (4 11 ) D Rear-end length 1,500 (4 11 ) E Overall width of upperstructure F Overall of cab 2,900 (9 6 ) G Min. ground clearance 440 (1 5 ) H Track gauge 2,000 (6 7 ) I Overall of guardrail 3,215 (10 7 ) J K L M Overall length Overall of boom Track shoe width Overall width 500 (20 ) 7,720 (25 4 ) 2,870 (9 5 ) 4,900 (16 1 ) 2-Piece 600 (24 ) 2,600 (8 6 ) 7,690 (25 3 ) 2,900 (9 6 ) 700 (28 ) 2,700 (8 10 ) HX145LCR 2-PIECE WORKING RANGE 4,900 (16 1 ) 2-Piece A 8,270 (27 2 ) 8,675 (28 6 ) A on ground 8,130 (26 8 ) 8,540 (28 0 ) B 5,175 (16 12 ) 5,580 (18 4 ) B (8 level) 5,060 (16 7 ) 5,470 (17 11 ) C Max. vertical wall digging depth 4,555 (14 11 ) 5,015 (16 5 ) D Max. digging 9,340 (30 8 ) 9,715 (31 10 ) E Max. dumping 6,850 (22 6 ) 7,230 (23 9 ) F Min. front swing radius 2,300 (7 7 ) 2,250 (7 5 ) 5
6 DIMENSIONS & WORKING RANGE HX145LCR 2-PIECE (DOZER TYPE) DIMENSIONS 4.9 m (16 1 ) 2-piece boom and 2.1 m & 2.5 m. A Tumbler distance 3,090 (10 2 ) B Overall length of crawler 3,798 (12 4 ) C clearance of counterweight 930 (3 1 ) D Tail swing radius 1,500 (4 11 ) D Rear-end length 1,500 (4 11 ) E Overall width of upperstructure F Overall of cab 2,900 (9 6 ) G Min. ground clearance 440 (1 5 ) H Track gauge 2,000 (6 7 ) I clearance of blade up 410 (1 4 ) N Depth of blade down 450 (1 5 ) O Height of blade 575 (1 8 ) P Overall of guardrail 3,215 (10 7 ) J K L M Overall length Overall of boom Track shoe width Overall width 500 (20 ) 8,180 (26 10 ) 2,870 (9 5 ) 4,900 (16 1 ) 2-Piece 600 (24 ) 2,600 (8 6 ) 8,150 (26 9 ) 2,900 (9 6 ) 700 (28 ) 2,700 (8 10 ) HX145LCR 2-PIECE (DOZER TYPE) WORKING RANGE 4,900 (16 1 ) 2-Piece A 8,270 (27 2 ) 8,675 (28 6 ) A on ground 8,130 (26 8 ) 8,540 (28 0 ) B 5,175 (16 12 ) 5,580 (18 4 ) B (8 level) 5,060 (16 7 ) 5,470 (17 11 ) C Max. vertical wall digging depth 4,555 (14 11 ) 5,015 (16 5 ) D Max. digging 9,340 (30 8 ) 9,715 (31 10 ) E Max. dumping 6,850 (22 6 ) 7,230 (23 9 ) F Min. front swing radius 2,300 (7 7 ) 2,250 (7 5 ) 6
7 LIFTING CAPACITY Rating over-front Rating over-side or 360 degrees HX145LCR Boom: 4.6 m (15 1 ) / : 1.9 m (6 3 ) / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. 6.0 m kg *3240 *3240 * (20 ft) lb *7140 *7140 * (18.9) 4.5 m kg *5040 *5040 * (15 ft) lb *11110 *11110 * (22.1) 3.0 m kg * * (10 ft) lb * * (23.7) 1.5 m kg * (5 ft) lb * (24.0) kg * lb * (23.2) -1.5 m kg *6890 *6890 * (-5 ft) lb *15190 *15190 * (21.0) -3.0 m kg * * *2250 * (-10 ft) lb * * *4960 *4960 (16.8) Boom: 4.6 m (15 1 ) / : 2.1 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. 6.0 m kg * (20 ft) lb * (19.6) 4.5 m kg *4410 *4410 * * (15 ft) lb *9720 *9720 * * (22.7) 3.0 m kg * * (10 ft) lb * * (24.2) 1.5 m kg * (5 ft) lb * (24.6) kg * lb * (23.8) -1.5 m kg *6570 *6570 * (-5 ft) lb *14480 *14480 * (21.7) -3.0 m kg *9010 *9010 * * * (-10 ft) lb *19860 *19860 * * * (17.7) Boom: 4.6 m (15 1 ) / : 2.5 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. 6.0 m kg *2960 *2960 * (20 ft) lb *6530 *6530 * (21.3) 4.5 m kg * * (15 ft) lb * * (24.2) 3.0 m kg *6110 *6110 * (10 ft) lb *13470 *13470 * (25.6) 1.5 m kg * (5 ft) lb * (25.9) kg * lb * (25.2) -1.5 m kg *5880 *5880 * (-5 ft) lb *12960 *12960 * (23.2) -3.0 m kg *8960 *8960 * * * (-10 ft) lb *19750 *19750 * * * (19.6) -4.5 m kg *3710 *3710 (-15 ft) lb *8180 * Lifting capacity are based on SAE J1097 and ISO Lifting capacity of the ROBEX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 7
8 LIFTING CAPACITY Rating over-front Rating over-side or 360 degrees HX145LCR Boom: 4.6 m (15 1 ) / : 3.0 m (9 10 ) / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. 7.5 m (25 ft) 6.0 m kg *2580 *2580 *1710 *1710 * (20 ft) lb *5690 *5690 *3770 *3770 * (23.2) 4.5 m kg *2790 *2790 * (15 ft) lb *6150 *6150 * (25.8) 3.0 m kg *3770 *3770 * * * (10 ft) lb *8310 *8310 * * * (27.1) 1.5 m kg * * * (5 ft) lb * * * (27.4) kg * * lb * * (26.7) -1.5 m kg *5400 *5400 * (-5 ft) lb *11900 *11900 * (24.9) -3.0 m kg *7890 *7890 * * (-10 ft) lb *17390 *17390 * * (21.6) -4.5 m kg *5120 *5120 * (-15 ft) lb *11290 *11290 * Boom: 4.6 m (15 1 ) / : 1.9 m (6 3 ) / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade up 6.0 m kg *3240 *3240 * (20 ft) lb *7140 *7140 * (18.9) 4.5 m kg *5040 *5040 * (15 ft) lb *11110 *11110 * (22.1) 3.0 m kg * * (10 ft) lb * * (23.7) 1.5 m kg * (5 ft) lb * (24.0) kg * lb * (23.2) -1.5 m kg *6890 *6890 * (-5 ft) lb *15190 *15190 * (21.0) -3.0 m kg * * *2250 * (-10 ft) lb * * *4960 *4960 (16.8) Boom: 4.6 m (15 1 ) / : 1.9 m (6 3 ) / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade down 6.0 m kg *3240 *3240 * (20 ft) lb *7140 *7140 * (18.9) 4.5 m kg *5040 *5040 * * (15 ft) lb *11110 *11110 * * (22.1) 3.0 m kg *7250 *7250 * * * (10 ft) lb *15980 *15980 * * * (23.7) 1.5 m kg * * * * (5 ft) lb * * * * (24.0) kg * * * * lb * * * * (23.2) -1.5 m kg *6890 *6890 * * * (-5 ft) lb *15190 *15190 * * * (21.0) -3.0 m kg *5970 *5970 * *2250 * (-10 ft) lb *13160 *13160 * *4960 *4960 (16.8) 1. Lifting capacity are based on SAE J1097 and ISO Lifting capacity of the ROBEX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 8
9 LIFTING CAPACITY Rating over-front Rating over-side or 360 degrees HX145LCR Boom: 4.6 m (15 1 ) / : 2.1 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade up 6.0 m kg *3440 *3440 * (20 ft) lb *7580 *7580 * (19.6) 4.5 m kg *4410 *4410 * * (15 ft) lb *9720 *9720 * * (22.7) 3.0 m kg * * (10 ft) lb * * (24.2) 1.5 m kg * (5 ft) lb * (24.6) kg * lb * (23.8) -1.5 m kg *6570 *6570 * (-5 ft) lb *14480 *14480 * (21.7) -3.0 m kg *9010 *9010 * * * (-10 ft) lb *19860 *19860 * * * (17.7) Boom: 4.6 m (15 1 ) / : 2.1 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade down 6.0 m kg *3440 *3440 * (20 ft) lb *7580 *7580 * (19.6) 4.5 m kg *4410 *4410 * * * (15 ft) lb *9720 *9720 * * * (22.7) 3.0 m kg *6880 *6880 * * * (10 ft) lb *15170 *15170 * * * (24.2) 1.5 m kg * * * * (5 ft) lb * * * * (24.6) kg * * * * lb * * * * (23.8) -1.5 m kg *6570 *6570 * * * * (-5 ft) lb *14480 *14480 * * * * (21.7) -3.0 m kg *9010 *9010 *6340 *6340 * *2390 * (-10 ft) lb *19860 *19860 *13980 *13980 * *5270 *5270 (17.7) Boom: 4.6 m (15 1 ) / : 2.5 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade up 6.0 m kg *2970 *2970 * (20 ft) lb *6550 *6550 * (21.3) 4.5 m kg *3490 *3490 * (15 ft) lb *7690 *7690 * (24.2) 3.0 m kg *6120 *6120 * (10 ft) lb *13490 *13490 * (25.6) 1.5 m kg * * (5 ft) lb * * (25.9) kg * lb * (25.2) -1.5 m kg *5870 *5870 * (-5 ft) lb *12940 *12940 * (23.2) -3.0 m kg *8960 *8960 * * * (-10 ft) lb *19750 *19750 * * * (19.6) -4.5 m kg *3710 *3710 (-15 ft) lb *8180 * Lifting capacity are based on SAE J1097 and ISO Lifting capacity of the ROBEX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 9
10 LIFTING CAPACITY Rating over-front Rating over-side or 360 degrees HX145LCR Boom: 4.6 m (15 1 ) / : 2.5 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade down 6.0 m kg *2970 *2970 * (20 ft) lb *6550 *6550 * (21.3) 4.5 m kg *3490 *3490 * * (15 ft) lb *7690 *7690 * * (24.2) 3.0 m kg *6120 *6120 * * * (10 ft) lb *13490 *13490 * * * (25.6) 1.5 m kg * * * * (5 ft) lb * * * * (25.9) kg * * * * lb * * * * (25.2) -1.5 m kg *5870 *5870 * * * * (-5 ft) lb *12940 *12940 * * * * (23.2) -3.0 m kg *8960 *8960 * * * (-10 ft) lb *19750 *19750 * * * (19.6) -4.5 m kg *3710 *3710 (-15 ft) lb *8180 *8180 Boom: 4.6 m (15 1 ) / : 3.0 m (9 10 ) / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade up 7.5 m (25 ft) 6.0 m kg *2580 *2580 *1710 *1710 * (20 ft) lb *5690 *5690 *3770 *3770 * (23.2) 4.5 m kg *2790 *2790 * (15 ft) lb *6150 *6150 * (25.8) 3.0 m kg *3770 *3770 * * * (10 ft) lb *8310 *8310 * * * (27.1) 1.5 m kg * * * (5 ft) lb * * * (27.4) kg * * lb * * (26.7) -1.5 m kg *5400 *5400 * (-5 ft) lb *11900 *11900 * (24.9) -3.0 m kg *7890 *7890 * * (-10 ft) lb *17390 *17390 * * (21.6) -4.5 m kg *5120 *5120 * (-15 ft) lb *11290 *11290 * Boom: 4.6 m (15 1 ) / : 3.0 m (9 10 ) / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade down 7.5 m (25 ft) 6.0 m kg *2580 *2580 *1710 *1710 * (20 ft) lb *5690 *5690 *3770 *3770 * (23.2) 4.5 m kg *2790 *2790 * * (15 ft) lb *6150 *6150 * * (25.8) 3.0 m kg *3770 *3770 *3740 *3740 * *1390 *1390 * (10 ft) lb *8310 *8310 *8250 *8250 * *3060 *3060 * (27.1) 1.5 m kg * * * * * (5 ft) lb * * * * * (27.4) kg * * * * * lb * * * * * (26.7) -1.5 m kg *5400 *5400 * * * * (-5 ft) lb *11900 *11900 * * * * (24.9) -3.0 m kg *7890 *7890 * * * * (-10 ft) lb *17390 *17390 * * * * (21.6) -4.5 m kg *5120 *5120 *3220 *3220 (-15 ft) lb *11290 *11290 *7100 *
11 LIFTING CAPACITY Rating over-front Rating over-side or 360 degrees HX145LCR 2-PIECE BOOM Boom: 4.9 m (16 1 ) / : 2.1 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. 6.0 m kg *3480 *3480 *3700 *3700 * (20 ft) lb *7670 *7670 *8160 *8160 * (21.2) 4.5 m kg *3410 *3410 *4460 *4460 * * (15 ft) lb *7520 *7520 *9830 *9830 * * (24.0) 3.0 m kg * * (10 ft) lb * * (25.5) 1.5 m kg (5 ft) lb (25.8) kg * lb * (25.0) -1.5 m kg * (-5 ft) lb * Boom: 4.9 m (16 1 ) / : 2.5 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. 7.5 m (25 ft) 6.0 m kg *2640 *2640 *3000 *3000 *3110 *3110 *1990 * (20 ft) lb *5820 *5820 *6610 *6610 *6860 *6860 *4390 * (22.8) 4.5 m kg *2270 *2270 *3170 *3170 * * (15 ft) lb *5000 *5000 *6990 *6990 * * (25.5) 3.0 m kg *6030 *6030 * (10 ft) lb *13290 *13290 * (26.8) 1.5 m kg * * (5 ft) lb * * (27.1) kg * lb * (26.4) -1.5 m kg * (-5 ft) lb * (24.6) -3.0 m kg (-10 ft) lb Boom: 4.9 m (16 1 ) / : 2.1 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade up 6.0 m kg *3480 *3480 *3700 *3700 *3490 *3490 * (20 ft) lb *7670 *7670 *8160 *8160 *7690 *7690 * (21.2) 4.5 m kg *3410 *3410 *4460 *4460 * * (15 ft) lb *7520 *7520 *9830 *9830 * * (24.0) 3.0 m kg * * (10 ft) lb * * (25.5) 1.5 m kg (5 ft) lb (25.8) kg * lb * (25.0) -1.5 m kg * (-5 ft) lb * Lifting capacity are based on SAE J1097 and ISO Lifting capacity of the ROBEX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 11
12 LIFTING CAPACITY Rating over-front Rating over-side or 360 degrees HX145LCR 2-PIECE BOOM Boom: 4.9 m (16 1 ) / : 2.1 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade down 6.0 m kg *3480 *3480 *3700 *3700 *3490 *3490 * (20 ft) lb *7670 *7670 *8160 *8160 *7690 *7690 * (21.2) 4.5 m kg *3410 *3410 *4460 *4460 *3800 *3800 * * (15 ft) lb *7520 *7520 *9830 *9830 *8380 *8380 * * (24.0) 3.0 m kg *6790 *6790 * * * (10 ft) lb *14970 *14970 * * * (25.5) 1.5 m kg * * * (5 ft) lb * * * (25.8) kg *5960 *5960 * * * lb *13140 *13140 * * * (25.0) -1.5 m kg * * * (-5 ft) lb * * * Boom: 4.9 m (16 1 ) / : 2.5 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade up 7.5 m (25 ft) 6.0 m kg *2640 *2640 *3000 *3000 *3110 *3110 *1990 * (20 ft) lb *5820 *5820 *6610 *6610 *6860 *6860 *4390 * (22.8) 4.5 m kg *2280 *2280 *3180 *3180 *3450 *3450 * (15 ft) lb *5030 *5030 *7010 *7010 *7610 *7610 * (25.5) 3.0 m kg *6030 *6030 * * (10 ft) lb *13290 *13290 * * (26.8) 1.5 m kg * * * (5 ft) lb * * * (27.1) kg * lb * (26.4) -1.5 m kg * (-5 ft) lb * (24.6) -3.0 m kg * (-10 ft) lb * Boom: 4.9 m (16 1 ) / : 2.5 m / Bucket: 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe: 600 mm (24 ) triple grouser with 2,800 kg (6,170 lb) counterweight. Dozer Blade down 7.5 m (25 ft) 6.0 m kg *2640 *2640 *3000 *3000 *3110 *3110 *1990 *1990 * (20 ft) lb *5820 *5820 *6610 *6610 *6860 *6860 *4390 *4390 * (22.8) 4.5 m kg *2280 *2280 *3180 *3180 *3450 *3450 * * (15 ft) lb *5030 *5030 *7010 *7010 *7610 *7610 * * (25.5) 3.0 m kg *6030 *6030 * * * (10 ft) lb *13290 *13290 * * * (26.8) 1.5 m kg * * * * * (5 ft) lb * * * * * (27.1) kg * * * * lb * * * * (26.4) -1.5 m kg * * * * (-5 ft) lb * * * * (24.6) -3.0 m kg * (-10 ft) lb * Lifting capacity are based on SAE J1097 and ISO Lifting capacity of the ROBEX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 12
13 ENGINE Perkins 1204F engine HYDRAULIC SYSTEM Intelligent Power Control (IPC) 3-power mode, 2-work mode, user mode Variable Power Control Pump Flow Control Attachment Mode Flow Control Engine Auto Idle Engine Auto Shutdown Control Electronic Fan Control CABIN & INTERIOR ISO Standard cabin Rise-up type windshield wiper Radio / USB player Handsfree mobile phone system with USB 12 volt power outlet (24V DC to 12V DC converter) Electric horn All-weather steel cab with 360 visibility Safety glass windows Sliding fold-in front window Sliding side window (LH) Lockable door Hot & cool box Storage compartment & Ashtray Transparent cabin roof-cover Sun visor Door and cab locks, one key Mechanical suspension seat with heater Pilot-operated slidable joystick Console box adjust system Automatic climate control Air conditioner & heater Defroster Starting Aid (air grid heater) for cold weather Centralized monitoring 8 LCD display Engine speed or Trip meter/accel. Engine coolant temperature gauge Max power Low speed/high speed Auto idle Overload Check Engine Air cleaner clogging Indicators ECO Gauges Fuel level gauge Hyd. oil temperature gauge Warnings Communication error Low battery Clock Cabin lights Cabin front window rain guard Seat Adjustable air suspension seat with heater Cabin FOPS/FOG (ISO/DIS 10262) Level 2 FOPS (Falling Object Protective Structure) ISO 3449 Level 2 FOG (Falling Object Guard) Cabin ROPS (ISO ) ROPS (Roll Over Protective Structure) STD OPT SAFETY Battery master switch Rearview camera Four front working lights Travel alarm Rear work lamp Beacon lamp Automatic swing brake Boom holding system holding system Safety lock valve for boom cylinder with overload warning device Safety lock valve for arm cylinder Swing Lock System Two outside rearview mirrors OTHER Booms 4.6 m; 15 1 Mono 4.1 m m; 13 5 Mono 4.9 m; Piece s 1.9 m; m; m; m; 9 11 Removable clean-out dust net for cooler Removable reservoir tank Fuel pre-filter Self-diagnostics system Hi-mate (Remote Management System) Batteries (2 12 V 100 Ah) Fuel filler pump (50 l/min) Single-acting piping kit (breaker, etc.) Double-acting piping kit (clamshell, etc.) Rotating Piping Kit Quick coupler piping Quick coupler Accumulator for lowering work equipment Pattern change valve (2 patterns) Fine Swing Control System Tool kit UNDERCARRIAGE Lower frame under cover (Additional) Lower frame under cover (Normal) Track shoes Triple grouser shoe (600 mm; 24 ) Triple grouser shoe (700 mm; 28 ) Track rail guard STD = Standard OPT = Optional STD OPT * Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards. * The photos may include attachments and optional equipment that are not available in your area. * Materials and specifications are subject to change without advance notice. * All imperial measurements rounded off to the nearest pound or inch. PLEASE CONTACT EN Rev 0
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
More informationSpecif ications R125LCR-9A
Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power
More informationSpecifications R220LC-9A / R220NLC-9A
Specifications R220LC9A / R220NLC9A ENGINE MODEL Type CUMMINS QSB6.7 Water cooled, 4 cycle Diesel, 6Cylinders in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel
More informationWith Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
More informationWith Tier 4 Interim Engine installed. hyundai heavy industries
With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
More informationNo. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type
SPCIICTIONS NGIN Maker / Model Type Rated flywheel horse power S DIN Scania DC13 084c 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 444 HP (331 kw) at 1,900 rpm J1349 (net) 424 HP
More informationNo. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type
SPCIICTIONS NGIN Maker / Model Type Rated flywheel horse power S DIN Scania DC13 084 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 444 HP (331 kw) at 1,900 rpm J1349 (net) 424 HP
More informationWith Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
More informationWe build a better future
We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. *Photo may include optional equipment. BUILT FOR MAXIMUM POWER, PERFORMANCE AND RELIABILITY. Hyundai Heavy Industries
More informationWe build a better future
We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. BUILT FOR MAXIMUM POWER, PERFORMANCE AND RELIABILITY. Hyundai Heavy Industries enters a new chapter in construction
More informationNo. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type
SPIITIONS NGIN Maker / Model Type Rated flywheel horse power S DIN ummins QSL9 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 267 kw (359 HP) at 1,650 rpm J1349 (net) 257 kw (344 HP)
More informationWe build a better future
We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. *Photo may include optional equipment. Hi-mate, Hyundai s newly developed remote management system, using GPS-satellite
More informationWe build a better future
We build a better future Equipped with Tier Engine *Photo may include optional equipment. Hi-mate, Hyundai s newly developed remote management system, using GPS-satellite technology, provides our customers
More informationWith Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 129 kw (173 HP) at 1,950 rpm Gross Power SAE J1995 / 136 kw (183 HP) at 1,950 rpm Travel Speed
More informationWith Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, optimal
More informationWith Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more
More informationWith Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
More information55-7A. Dimensions. Working Ranges. Standard Equipment
Dimensions Unit (mm) Working Ranges Standard Equipment Boom length 3,000 mm(9' 10") Arm length 1,600 mm(5' 3") 1,900 mm(6' 3") A Max. digging reach A' Max. digging reach at ground B Max. digging depth
More informationDimensions & Working Range
We build a better future Dimensions & Working Range R35Z-9 Dimensions With Tier 4 Engine installed mm (ft.in) A B C D E F Overall width of upper structure Overall width of cab Overall height of cab Tail
More informationDimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT
Dimensions 1,650 986 Standard Equipment Working ranges ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up
More informationThe print quality of this copy is not an accurate representation of the original.
We build a better future Equipped with Tier 3a engine *Photo may include optional equipment. Pleasure works an operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy
More informationWith Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed Net Power SAE J1349 / 53 kw (71 HP) at 2,200 rpm Gross Power SAE J1995 / 55 kw (74 HP) at 2,200 rpm Travel Speed 5.5 km/hr (3.4 mph) / 3.3 km/hr (2.1 mph)
More information7 SERIES MINI EXCAVATOR
Dimensions 1,650 986 Standard Equipment 2,850 2,610 290 6,100 2,100 1,600 1,925 7 SERIES MINI EXCAVATOR ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with
More informationWith Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 230 HP (171 kw) at 1,950 rpm Gross Power SAE J1995 / 242 HP (180 kw) at 1,950 rpm Travel Speed
More informationHYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed. * Photo may include optional equipment.
STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 10262 Level Ⅰ) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield
More informationNEW 7 SERIES MINI EXCAVATOR
Working ranges A A' Boom length Arm length A Max. digging reach,000 mm(9' 10") 1,600 mm(5' ") 1,900 mm(6' ") 6,150 mm(20' 2") 6,400 mm(21' 0") A' Max. digging reach at ground 6,010 mm(19' 9") 6,270 mm(20'
More information*Photo may include optional equipment. Equipped with Tier 3 Engine
*Photo may include optional equipment. Equipped with Tier 3 Engine Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy Industries do everything
More informationWith Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 87 kw (116 HP) at 1,950 rpm Gross Power SAE J1995 / 92.7 kw (124 HP) at 1,950 rpm Travel Speed
More informationWith Tier 4 final / Stage III B Engine installed
With Tier 4 final / Stage III B Engine installed *Foto kan optionele uitrusting omvatten. Net Power SAE J1349 / 53 kw (71 HP) at 2,200 rpm Gross Power SAE J1995 / 55 kw (74 HP) at 2,200 rpm Travel Speed
More informationWe build a better future
We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy
More informationHYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment
With Tier 4 Interim Engine installed MOVING YOU FURTHER hyundai heavy industries *Photo may include optional equipment HYUNDAI CONSTRUCTION EQUIPMENT AMERICAS, INC. Pride at Work Hyundai Heavy Industries
More informationWith Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 424 HP (316 kw) at 1,900 rpm Gross Power SAE J1995 / 444 HP (331 kw) at 1,900 rpm Travel Speed
More informationDX420LC TECHNICAL DATA
DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw
More informationDX140LC TECHNICAL DATA
DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS
More informationNEW 7 SERIES MINI EXCAVATOR. Yanmar 4TNV94L Engine. Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) R55W-7_taal_en :20 Pagina 1
R55W-7_taal_en 05-09-2005 15:20 Pagina 1 NEW 7 SERIES MINI EXCAVATOR Yanmar 4TNV94L Engine 42kW/57HP Operating weight 5,450 (12,020 ) Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) Photo may include
More informationSTANDARD EQUIPMENT MOVING YOU FURTHER OPTIONAL EQUIPMENT HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed
STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) TOPS(ISO 12117) FOPS(ISO 3449) FOG(ISO 10262 Level I) All-weather steel cab with all-around visibility Safety glass windows Sliding fold-in front
More informationTool kit Long Arm (1.35m, 4'5") Heater & Defroster Lever pattern change valve Additional CWT
STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) TOPS(ISO 12117) FOPS(ISO 3449) FOG(ISO 10262 Level I) All-weather steel cab with all-around visibility Safety glass windows Sliding fold-in front
More information*Photo may include optional equipment. We build a better future
*Photo may include optional equipment. We build a better future Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy Industries do everything we
More informationStandard Equipment. We build a better future. With Tier 4 Interim Engine installed. *Photo may include optional equipment.
Standard Equipment We build a better future ISO standard cabin Cabin ROPS(ISO 12117-2) FOPS(ISO 3449) FOG(ISO 10262 Level ) All-weather steel cab with all-around visibility Safety glass windows Rise-up
More informationQuick coupler Rubber crawler (450 mm, 1 6 ) Narrow bucket (0.14m 3, 0.18yd 3 ) Long arm (2.2m, 7' 3") Tool kit Operator suit
STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 12117-2) FOG(ISO 10262 Level I) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper
More informationWith Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 127 kw (171 HP) at 1,800 rpm Gross Power SAE J1995 / 134 kw (180 HP) at 1,800 rpm Travel Speed
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES MOVING YOU FURTHER *Photo may include optional equipment. 330LC-9A(resized).indd 2 1/11/2013 1:54:28 PM PRIDE AT WORK Hyundai Heavy Industries
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT. *Photo may include optional equipment Rev. 0
STANDARD EQUIPMENT ISO standard canopy Canopy ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 10262 Level I) TOPS(ISO 12117) Centralized monitoring Gauges Fuel level gauge OPTIONAL EQUIPMENT Engine coolant temperature
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT. We build a better future. *Photo may include optional equipment Rev.
We build a better future STANDARD EQUIPMENT ISO standard canopy Canopy ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 106 Level I) TOPS(ISO 1117) Centralized monitoring Gauges Fuel level gauge Engine coolant temperature
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.
With Tier 4 Interim Engine installed MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES *Photo may include optional equipment. PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving
More informationWith Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 129.4 kw (174 HP) at 2,000 rpm Gross Power SAE J1995 / 136.8 kw (183 HP) at 2,000 rpm Travel Speed
More informationMOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed Rev 0
Standard Equipment ISO standard cabin Cabin ROPS(ISO 3471) FOG(ISO 10262 LevelI) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield
More informationEQUIPMENT ENGINE HYDRAULIC SYSTEM
EQUIPMENT ENGINE Model... Isuzu AI-4JJ1X Type... 4-cycle water-cooled, direct injection Aspiration... Turbocharged, intercooled No. of cylinders... 4 Rated power ISO 9249, net... 90.2 kw (121 HP) at 2
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT
STANDARD EQUIPMENT OPTIONAL EQUIPMENT We build a better future ISO Standard cabin All-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window
More informationEC140B LC VOLVO EXCAVATOR
VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection
More informationNEW 7A SERIES. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 250LC-7A PLEASE CONTACT
Standard Equipment Optional Equipment Robex 250LC-7A ISO standard cab All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding
More informationWe build a better future
We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy
More informationDoosan Infracore DX700LC TECHNICAL DATA
Doosan Infracore Construction Equipment DX700LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ISUZU AH6WG1XYSC01 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 463 / 1,800 (GROSS)
More informationDoosan Infracore DX55W TECHNICAL DATA
Doosan Infracore Construction Equipment DX55W TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Yanmar 4TNV98-E NUMBER OF CYLINDERS 4 RATED FLYWHEEL POWER hp / rpm 56.8 / 2,400 (hp PER SAE
More informationZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)
ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA
More informationTXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator
Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,
More informationWe build a better future
STANDARD EQUIPMENT ISO Standard cabin All-weather steel cab with 360 0 visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(lh) Lockable door Hot
More informationTechnical specifications
Technical specifications Q Engine Model Doosan DL06K 4-Cycle Water-Cooled, Turbocharged, Coon Rail Direct Injection, Exhaust Gas Recirculation Diesel Particulate Filter (DPF) No. of cylinders 6 Rated power
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.
With Tier 4 Interim Engine installed MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES *Photo may include optional equipment. PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving
More information40,7 kw / 54,6 Hp at rpm kg mm DX80R. Compact Equipment
40,7 kw / 54,6 Hp at 2.000 rpm 8.330 kg 4.180-4.675 mm DX80R Compact Equipment Doosan DX80R hydraulic excavator: a new model with novel features The new DX80R hydraulic excavator offers additional value
More informationWith Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 111 kw (149 HP) at 2,150 rpm Gross Power SAE J1995 / 117 kw (157 HP) at 2,150 rpm Travel Speed
More information37,6 kw / 50,4 Hp at rpm kg mm DX60R. Compact Equipment
37,6 kw / 50,4 Hp at 2.200 rpm 5.875 kg 3.725-4.145 mm DX60R Compact Equipment Doosan DX60R hydraulic excavator: a new model with novel features The new DX60R hydraulic excavator offers additional value
More informationWe build a better future
We build a better future * Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards. * The photos may include
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT
STANDARD EQUIPMENT OPTIONAL EQUIPMENT ISO Standard cabin O All-weather steel cab with 360 visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(lh)
More informationEC210B LC EC210B NC/EC210B NLC
VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~
More informationWe build a better future
STANDARD EQUIPMENT optional EQUIPMENT We build a better future ISO Standard cabin All-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window
More informationHYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb
NET HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 31925 33178 kg 70,383 73,146 lb PC308USLC-3 BUCKET CAPACITY 0.74 1.87 m 3 0.97 2.45 yd 3 PC 308US LC Photo may include optional equipment. HYDRAULIC
More informationHITACHI ZAXIS80SB. engine rated power 39 kw / 52 HP. operating weight ZAXIS80SB : kg ZAXIS80SBLC : kg
HITACHI ZAXIS80SB engine rated power 39 kw / 52 HP operating weight ZAXIS80SB : 7 360-8 120 kg ZAXIS80SBLC : 7 440-8 210 kg bucket capacity SAE, PCSA heaped : 0.13-0.33 m 3 CECE heaped : 0.12-0.29 m 3
More informationEC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM
VOLVO EXCAVATOR EC160B LC EC160B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 90 kw (121 hp) Operating weight: LC: 16.6 ~ 18.4 t NLC: 16.5 ~ 18.3 t Buckets (SAE) 775 ~ 1,225 l Turbocharged VOLVO diesel
More informationEC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR
VOLVO EXCAVATOR EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 134 kw (180 hp) Operating weight: LC: 24.2 ~ 25.8 t NLC: 24.8 ~ 25.7 t Turbocharged VOLVO diesel engine with water cooling,
More informationCummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive
330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier
More informationZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp)
ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC-5 90 kw (121 hp) ZX180LC-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX180LC-5 Manufacturer and Model Isuzu 4JJ1 Non-Road Emissions Standards Certified
More informationEC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l
VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): 1 800 ~ 3 775 l Turbocharged VOLVO diesel engine with direct injection and charged air cooler
More informationCX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m)
CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Isuzu AM-4JJ1X, Tier 4 Interim Certified (Cooled EGR) Fuel Type Cylinders Requires ultra low-sulfur fuel B5 biodiesel tolerant
More informationSwing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi)
925E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 25,500 kg (56,218 lb) Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes, boom, arm, bucket and operator
More informationHYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (20 L/min) Relief pressure psi (3900 kpa)
9010B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L) Fuel injection... Direct
More informationTwo variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34.
922E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 22,800 kg (50,265 lb) SWING SYSTEM ELECTRIC SYSTEM Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes,
More informationEC460 VOLVO EXCAVATOR LONG CRAWLER
VOLVO EXCAVATOR EC460 LONG CRAWLER Engine power, gross: 239 kw (321 hp) Operating weight: 44.3 ~ 46.0 t Buckets (SAE): 1900 ~ 2300 l Low-emission, turbocharged Cummins diesel engine with direct injection
More informationLubricant and Coolant Capacity
Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt
More informationHYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (22.8 L/min) Relief pressure psi (3.
CX130 Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L) Fuel injection... Direct
More informationHydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump
14 Engine Base engine for use in the U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Manufacturer and Model John Deere PowerTech PWX John Deere 4045H Non-Road
More informationZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp)
ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC-5 119 kw (150 hp) zx210/210lc-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX210-5 / ZX210LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emission Standards
More informationCX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51
CX800B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/ Displacement Fuel injection Fuel Fuel filter Cooling Horsepower per SAE J1349
More informationEC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l
VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l Turbocharged VOLVO diesel engine with water cooling, direct injection and charged
More informationCX210C EXCAVATOR. Swing mechanism. Length 14 ft 8 in (4.47 m) Track gauge 7 ft 10 in (2.4 m) Track Grease lubricated / strutted
CX210C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Fuel Type Cylinders Isuzu AM-4HK1X Tier 4 Interim Certified (Cooled EGR) Requires ultra low-sulfur fuel B5 biodiesel tolerant
More informationEXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED
CX225 MSR EXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED ENGINE Model Type Isuzu AI-4HK1X, Tier 3 certified 4-stroke, turbocharged Cylinders 4 Displacement Bore/Stroke Fuel injection Fuel filter
More informationZAXIS. 210/210LC-5 n 119 kw (159 hp)
n 119 kw (159 hp) EnginE Manufacturer and Model... Isuzu 4HK1 Non-Road Emission Standards... certified to IT4 / Stage IIIB emissions Net Rated Power (ISO 9249)... 119 kw (159 hp) @ 1,900 rpm Cylinders...
More information40,8 kw / 54,7 Hp at rpm kg mm. DX55w. Compact Equipment
40,8 kw / 54,7 Hp at 2.400 rpm 5.550 kg 3.495-3.795 mm DX55w Compact Equipment Doosan DX55w hydraulic excavator: a new model with novel features The new DX55w hydraulic excavator offers additional value
More informationHYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)
9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...
More informationZAXIS-5 series SUPER LONG FRONT. ZX85US-5B 34.1 kw (45.7 HP) kg. Model Code Engine Rated Power Operating Weight
ZAXIS-5 series SUPER LONG FRONT A P P L I C A T I O N & A T T A C H M E N T Model Code Engine Rated Power Operating Weight ZX85US-5B 34.1 kw (45.7 HP) 9 170-9 340 kg SPECIFICATIONS ENGINE Model... Yanmar
More informationEC140C VOLVO EXCAVATOR. 28,110 32,370 lb, 92 hp
EC140C VOLVO EXCAVATOR 28,110 32,370 lb, 92 hp SPECIFICATIONS Engine The Volvo diesel engine delivers lower emissions, along with superior performance and fuel efficiency. The EPA Tier 3 compliant engine
More informationDL250TC TECHNICAL DATA
DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
More informationNumber of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design
CX700B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/Stroke Displacement 5.79 in x 6.07 in (147 x 154 mm) 957 in 3 (15 700 cc) Grade
More informationCRAWLER EXCAVATORS EH160 LC. Specifications.
CRAWLER EXCAVATORS Specifications EH160 LC www.newhollandconstruction.com EH160 LC MACHINE DIMENSIONS A M C E I F L G H D K J B Standard Arm Optional Arm Arm Length 10 2 (3.10 m) 8 6 (2.60 m) A. Overall
More informationDoosan Infracore DX225LL TECHNICAL DATA
Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)
More informationCX135. Variable displacement axial piston design
CX135 EXCAVATOR TIER III CERTIFIED ENGINE Model Type Isuzu AJ-4JJ1X, Tier III certified 4-stroke, turbocharged Cylinders 4 Bore/Stroke Displacement Fuel injection Fuel injection pump Fuel Fuel filter Cooling
More informationNumber of rollers Top, each track 1 Bottom, each track 5 Number of shoes Triple grouser each side 39. Gradeability 70%
CX75 EXCAVATOR TIER III CERTIFIED ENGINE Model Isuzu AU-4LE2X,Tier III certified Type 4-stroke turbocharged Cylinders 4 Bore/Stroke 3.35 in x 3.78 in (85 x 96 mm) Displacement 133 in 3 (2179 cc) Fuel injection
More informationDL250 TECHNICAL DATA
DL250 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
More informationCX80C OPERATOR ENVIRONMENT
CX80C EXCAVATOR SWING BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Type Cylinders Isuzu AP-4LE2X, Tier 4 Final Certified Water-cooled, 4-cycle. Turbo-charged w/ air-cooled intercooler w/ DOC 4-cylinder
More informationCX130C OPERATOR ENVIRONMENT. Sound level ISO6395 inside cab 70 dba Electrical outlet Cab interior light (1) Rear-view camera (1) Air-suspension
CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AM-4JJ1X, Cooled EGR Tier 4 Interim Requires ultra low-sulfur fuel B5 biodiesel tolerant
More information