WHEELED EXCAVATORS WX188 I WX218 MISSION ACCOMPLISHED

Transcription

1 WHEELED EXCAVATORS WX188 I WX218 MISSION ACCOMPLISHED

2 2 WHEELED EXCAVATORS

3 THE 8 SERIES POWER AND CONTROL The WX wheeled excavators are designed to deliver a axiu of productivity and precision. The extra powerful hydraulics are anaged by the Case Intelligent Hydraulic Syste (CIHS) control, which offers a single CPU for iproved controllability and siplifi ed diagnostics. The Case wheeled excavators use a 3-pup hydraulic syste, with one pup dedicated to the slew function. This provides continuous oveent and allows the operator to ulti-function the controls for sooth, productive digging perforance. Case wheel excavators are equipped with Case Intelligent Swing syste (CIS) allowing the operator to adjust the upperstructure slew speed to suit to all working site conditions. Two new working odes, easily switchable on the joystick, have been ipleented to better adapt the achine behaviour to specifi c tasks: STANDARD MODE suited for general applications and precision grading with axiu fuel savings; POWER MODE for a axiised production and faster cycles. The Autoatic Powerboost function delivers axiu perforance for heavy breakout and lifting operations. The Power Liit Control feature onitors the engine and hydraulic pups to optiise power output. SUPERIOR VERSATILITY The flow and pressure to the attachents is easy to adjust and up to 12 settings for different attachents can be eorised. 3

4 WHEELED EXCAVATORS POWERTRAIN Our WX excavators drive through a fully autoatic hydrostatic powershift transission and heavy duty ZF axles, providing fast travel speed between working sites and excellent traction. An iproved orbitrol steering syste delivers effortless and precise control. A larger steering angle akes it even easier to ove in confi ned areas. With a creep speed function and high ground clearance, the achines are also capable of tackling the toughest of site conditions. Excellent drawbar pull is a feature of all three achines and the axles have an auto-locking feature for axiu stability when working without stabilisers. Multi-disc wet brakes and axle oil change intervals of 2,000 hours will reduce your custoers ownership and operating costs. TOTAL STABILITY The new WX design leads to an outstanding stability even on tires only. Our wheeled excavators have always boasted a robust design and sturdy build quality. These new WX odels are no exception, with a strong chassis providing the option of a dozer blade, the dozer blade and stabilisers, or stabilisers front and rear for total balance and a stable working platfor. The dozer blade with parallel kineatics is ade extra-robust in curved design for best aterial retention. 4

5 EASY MAINTENANCE Big and wide-opening hoods provide easy access to all service points. Maintenance operations are quick and easy with the grouped, easily accessible greasing points, and easy to reach fi lters at the rear of the achine. The extended greasing intervals for the attachent (up to 500 hours) axiise uptie and lower operating costs. RADIATOR LAYOUT The side-by-side radiator layout results in an extreely reliable cooling perforance and akes it easier to clean the. A front net keeps dust away fro the radiators, lengthening the interval between cleanings. SAFETY SAFE ATTACHMENT OPERATION Boo cylinders feature safety valves as standard. For added safety, a coplete object handling kit (safety valves on dipper, loading hook, overload warning) and a heavy-duty holder for grabs are available as options. ROPS/FOPS CAB The reinforced structure of the cab is ROPS and FOPS certifi ed.

6 WHEELED EXCAVATORS

7 FIRST-CLASS COMFORT The inclination of the steering colun is continuously adjustable to fi t the operator s best working position; the controls are individually adjustable to atch their preferences; the adjustable air suspended and heated seat cobined with the ergonoic design of arrests and foot pedals provide the best possible workstation. The tinted safety glass, sun blinds and transparent rain protection above the front window provide cofortable working conditions, while the autoatic air conditioning aintains a cofortable in-cab cliate for ore productive work. A hot and cool box, plenty of storage copartents, a radio with USB support, a icrophone for handsfree conversation, a front aux. port and a 12V auxiliary socket coplete the operator s cofortable workstation. EASY TO OPERATE The controls layout is designed to iniise fatigue, with all travel functions and switches easily accessible and grouped on the steering colun. The achine s inforation is easy to access and understand on the in-cab onitor, so the operator can focus on the job. A new engine speed and working ode selection dial akes it easy for the operator to set the achine up in any working situation. The dial delivers low idle speed, two lifting odes, and three Eco working odes. It also provides access to the Heavy Mode for axiu digging perforance. The new levelling ode can be easily activated in Eco or Heavy ode by siply pressing a switch on the right hand joystick. The blade and each of the stabilizers are proportionally operated. Each of the stabilizers can be easily activated by switches. ALL-ROUND VISIBILITY Large glazed surfaces, safety tinted glass, onepiece right-hand side window and large roof window provide superior visibility all around. Standard working lights on the boo and cab front add to the excellent visibility. The standard rear view caera further enhances visibility to the rear. 7

8 TELEMATICS THE SCIENCE BIT The Case SiteWatch teleatics syste uses a high-tech control unit ounted on each achine to collate inforation fro that achine and fro GPS satellites. This data is then sent wirelessly through the obile counication networks to the Case Teleatics Web Portal. SiteWatch: centralised fl eet control benefi ts at your fi ngertips Measure your true asset availability and optiise it Eliinate the phanto fl eet : SiteWatch allows to identify spare units or under loaded achines on each site. Becoe able to reallocate units where they are ore needed. Forward Maintenance Planning is easier since the actualised working hours are always available. Extend the benefi ts of SiteWatch to the rest of your fl eet: SiteWatch can be installed on the units of other brands as well. Challenge your Total Cost of Ownership! Being able to copare the fuel usage of different achine types will allow you choose the right equipent. Save on transport costs with planned and grouped aintenance tasks. Peace of ind, optiised uptie and lower repair costs: with preventive aintenance you can for exaple be alerted if the engine needs to be serviced and avoid a disruptive breakdown. Be able to copare your asset Return On Investent on different sites. Your equipent is used only during working hours. You can set up alerts so that you know if it is in use during the weekend or at night. Integrate with the prograed aintenance package, so that you can be sure every achine is at the right place at the right tie. More Safety, Lower Insurance Preiu Keep thieves away: dissuade the fro attacking your asset because it is geo-localised. SiteWatch is hidden so that thieves can t fi nd it quickly. Your fl eet is used only where you decide. You can defi ne a virtual fence and receive an eail when a achine exits that perieter.

9 STANDARD EQUIPMENT Latest generation FPT Stage III / Tier 3 diesel engine Direct injection with turbo charger and charge air cooling Air fi lter with safety cartridge Engine fi lters (oil, fuel and water separator) in reote position Auto-idling syste Cold starting equipent (-25 C) Pup anageent syste by power liit control Electrohydraulic servo control 3-pups hydraulic syste with two service pups and seperate swing pup Auto Power Boost syste 8 selectable power stages with peranent Power Boost in lift stages Autoatic power increase in road travel ode Autoatic battery ain switch (coupled to ignition key) Electronic iobiliser (PIN code) 12 V electrical auxiliary supply in cab Swing hydrostatic braking Autoatic / peranent swing brake odes Swing drive with low-wearing disc brake CIS (CASE intelligent syste) : Adjustable swing acceleration (power) and deceleration (brake) Cab according ROPS ISO : 2008 FOPS Level 2 Noise-insulated and viscous ounted cab Tinted safety glazing all around, full up and over windscreen Sun blinds, large roof window, transparent rain protection Autoatic air conditioning Rear View Caera with dedicated screen OPTIONS Hydraulic circuit for haer / shears Hydraulic circuit for grab rotation 22 l/in - ON/OFF control Hydraulic circuit for grab rotation 80 l/in - PROPORTIONAL Control Quick coupler provision on upperfrae Biodegradable hydraulic oil (Panolin) Guard Protective syste FGPS 20 k/h speed 35 k/h speed Radio with Bluetooth Control panel with LCD onitor integrating error diagnosis function and analogical gauges for engine cooling teperature and fuel level Ergonoic design of ar rests and foot pedals Air suspension seat individually adjustable for height and incline Consoles adjustable for height and length Forward/Reverse shifting on right joystick Centralised and independent control of blade and stabilizers on right joystick 2 front headlights (cab ounted) Road travel lights (front and rear) Robust, shiled arc-welded, odular chassis in box section design Power Shift gear box with anual / autoatic gear shifting Heavy duty axles with brakes for play-free work Hydrostatic travel braking Creeper speed Large toolbox under the step (right side) Encased ball bearing slew ring with long-life lubrication Manual / autoatic axle locking syste Electric diesel fi lling syste Safety valves on boo cylinders Cylinders with end-stroke daping syste Long interval greasing bushings (500 hours) Centralized greasing nipples on uppefrae and boo 2 working lights on boo Single or twin tyres Dozer blade with parallel guidance Heavy duty stabilizers with cylinder protection guards Transport holder for clashell grab Blade cylinders protection guard One piece boo, triple articulation (2 piece boo) Ars: WX188: WX218: Object handling kit with safety valve on ar cylinder, overloading warning device and load hook or load eye. Standard and optional equipent shown can vary by country. 9

10 WHEELED EXCAVATORS WX188 SPECIFICATIONS ENGINE Net fl ywheel power (ISO 14396/ECE R120) 118 kw / 158 hp Rated 2000 rp Make and odel F4GE9684E J607 Type Water-cooled, direct injection type diesel engine with intercooler turbo-charger Displaceent 6.7 l Nuber of cylinders 6 Bore x stroke 104 x 132 Maxiu torque at 1200 rp 670 N ELECTRICAL SYSTEM Voltage 24 V Batteries 2 x 12 V Battery rating (each) 100 Ah Alternator 70 A Starter otor 4 kw TRANSMISSION k/h k/h Max Road travel speed Max Field travel speed 5 8 Creep speed Maxiu drawbar pull (fi eld) 115 kn Power Shift ulti-disc gearbox shiftable under load. Autoatic or anual gear shift control. Travel ode autoatically engaged by pressing accelerator pedal. HYDRAULIC SYSTEM 2 x Priary pups 3 variable displaceent, axial piston Total axiu fl ow 389 l/in (2 x ) Auxiliary low fl ow, optional (on/off) 22 l/in Auxiliary ediu fl ow, optional (proportional) 80 l/in Ipleent/travel pressure 340 / 370 bar PowerBoost 370 bar Swing circuit pressure 360 / 390 bar Pilot pup 45 bar Boo cylinder ono 115 x 1170 Boo cylinder 2-piece boo 115 x 1020 Ar cylinder 125 x 1290 Bucket cylinder 105 x 1025 Positioning cylinder 155 x 745 Cylinder end stroke daping. Electrohydraulic servo-control. Three-pup hydraulics with two ain pups and separate swing pup. 8 selectable power stages with peranent Power Boost in lift stages: Low idle, Lift 1, Lift 2, Eco 1, Eco 2, Eco 3, Heavy, Roadtravel Adjustable swing acceleration (power) and deceleration (brake) Autoatic power increase in the drive ode. SWING DRIVE Swing speed 9 rp Swing torque 53 kn The swing function is operated bu a hydraulic closed circuit coupled with a echanical reducer integrating an autoatic static brake. The hudrostatic swing brake is adjustable in 3 settings. BRAKES Service brakes: play free, oil bath ulti disc type integrated in all four wheel hubs. Work brake: acts on service brakes and locks front axle oscillation. Parking brake: spring type echanical acting on the transission. Eergency brake: double braking circuit and autoatic parking and brake actuation with the engine shut down. STEERING Type ORBITROL with safety valve Pup gear type Steering cylinder double effect, integrated in axle TYRES Twin tyres / Single tyres 18R 19.5, 600/ Tyre availability can be liited by local hoologation. CAPACITIES Engine oil 15 l Cooling syste 22 l Fuel tank 274 l Hydraulic syste (incl. tank) 235 l for ono 250 l for triple articulation 10

11 GENERAL DIMENSIONS WX188 Equipped with twin tires A B / /2720 A B with rear blade B with rear stabilizers OPERATING WEIGHT WX axle width include bucket 610 kg and quick coupler 250 kg (with ) Rear blade kg kg kg kg kg kg Stabilizers kg kg kg kg kg kg Blade and stabilizers kg kg kg kg kg kg Stabilizers rear and front kg kg kg kg kg kg 2.75 axle width include bucket 610 kg and quick coupler 250 kg (with ) Rear blade kg kg kg kg kg kg Stabilizers kg kg kg kg kg kg Blade and stabilizers kg kg kg kg kg kg Stabilizers rear and front kg kg kg kg kg kg 11

12 PERFORMANCE DATA WX188 TRIPLE ARTICULATION G MONOBOOM E G E D D F F H H C C C C A B B A A Max. digging reach B Max. digging reach at ground level C Max. digging depth C Max. depth of cut for 8 level botto D Max. digging height E Min. front swing radius F Max. loading height G swing radius at ax height H Max. loading height (ar retracted) Ar digging force 98 kn 84 kn 73 kn - with auto power boost 107 kn 91 kn 79 kn Bucket digging force 125 kn 125 kn 125 kn - with auto power boost 136 kn 136 kn 136 kn 12

13 MONO BOOM - DIPPERSTICK At ax reach * * * * * FRONT BLADE+REAR STAB. DOWN At ax reach * 4.5* * 5.3* 4.0* 4.0* * 7.3* 6.1* * 3.9* * * * * * * * * * * * 11.2* 9.4* * * * 9.8* 7.4* 7.4* 5.5* MONO BOOM - DIPPERSTICK At ax reach * 3.0* * * * * * * * 6.0* * * FRONT BLADE+REAR STAB. DOWN At ax reach * 3.0* * 4.6* 2.7* 2.7* * 6.7* 5.8* * 2.6* * * * * 2.7* * * * * 2.9* * 6.0* 10.1* * * * 3.3* * 10.5* 9.6* * * * 11.1* 8.1* * * MONO BOOM - DIPPERSTICK At ax reach * 2.5* 2.2* 2.2* * * 1.9* * * * * * * * 6.3* * * * * * FRONT BLADE+REAR STAB. DOWN At ax reach * 2.5* 2.2* 2.2* * 4.1* 1.9* 1.9* * 4.9* 3.3* 3.3* 1.9* 1.9* * 12.0* 7.6* 7.6* 6.0* * * 1.9* * * * * 2.0* * 6.3* 10.0* * * * 2.3* * 9.4* 9.8* * * * 2.8* * 12.4* 8.6* * * 3.7* 6.7 LIFTING CAPACITY WX At ax reach * 4.5* * * * * * * * * * * * * * * * * * * * * At ax reach * 4.5* * 5.3* 4.0* 4.0* * 7.3* 6.1* 6.1* 3.9* 3.9* * 8.8* 6.7* * 4.0* * * * * * * * * 11.2* 9.4* * * * 9.8* 7.4* 7.4* 5.5* 5.5* At ax reach * 3.0* * * 2.7* * * * * * * * * * * * 6.0* 10.1* * * * * * * * * * At ax reach * 3.0* * 4.6* 2.7* 2.7* * 6.7* 5.8* 5.8* 2.6* 2.6* * 8.3* 6.4* * 4.4* 2.7* 2.7* * * * * 2.9* * 6.0* 10.1* * * * 3.3* * 10.5* 9.6* * * 4.1* * 11.1* 8.1* 8.1* 5.6* 5.6* 5.5* 5.5* At ax reach * 2.5* 2.2* 2.2* * * 1.9* * * * 1.9* * * * * * 1.9* * * * * 6.3* 10.0* * * * * * * * * * At ax reach * 2.5* 2.2* 2.2* * 4.1* 1.9* 1.9* * 4.9* 3.3* 3.3* 1.9* 1.9* * 12.0* 7.6* 7.6* 6.0* 6.0* 4.5* * 1.9* * 9.2* 6.7* * * 2.0* * 6.3* 10.0* * * * 2.3* * 9.4* 9.8* * * 3.8* 2.8* 2.8* * 12.4* 8.6* 8.6* 6.2* * 3.7* 6.7 The above loads (kg) are copliant to the ISO standards and refer to the excavator equipped with bucket. The indicated loads are no ore than 87% of hydraulic syste lift capacity or 75% of static tipping load. Values arked with an asterisk (*) are liited by the hydraulic lifting capacity rather than the tipping load. 13

14 LIFTING CAPACITY WX188 TRIPLE ARTICULATION - DIPPERSTICK At ax reach * * * * * * * * FRONT BLADE+REAR STAB. DOWN At ax reach * 6.3* 5.1* 5.1* * 6.2* 5.7* * 4.4* * 8.7* 7.1* 7.1* 5.9* 5.2* 4.2* * 8.1* 8.6* * * * * 11.5* 9.7* * * * * 14.7* 10.0* * * * * * * * * * TRIPLE ARTICULATION - DIPPERSTICK At ax reach * * * * * 6.7* 6.5* * * * * * FRONT BLADE+REAR STAB. DOWN At ax reach * 5.2* 3.4* 3.4* * 5.3* 5.0* 5.0* 3.0* 3.0* * 6.7* 6.5* 6.5* 5.6* 5.2* 3.2* 3.2* 2.9* 2.9* * 10.2* 8.1* * * * 2.9* * 11.7* 9.4* * * * 3.1* * 14.0* 9.9* * * * * * * * * * * TRIPLE ARTICULATION - DIPPERSTICK At ax reach * 3.3* * 3.0* 2.5* 2.5* * * * * * * * * * * * * * FRONT BLADE+REAR STAB. DOWN At ax reach * 3.3* * 3.3* 2.5* 2.5* * 4.2* 2.2* 2.2* * 4.8* 4.8* 4.8* 3.8* * 2.1* * 11.1* 7.4* 7.4* 5.8* * * 2.1* * 11.4* 8.9* * * * 2.2* * 13.0* 9.7* 7.6* 7.0* * * 2.4* * * * * * 2.8* * * * * 4.2* At ax reach * * * * * * 8.7* 7.1* * * * 8.1* 8.6* * * * * * 5.2* * * * * * * * * * * At ax reach * 6.3* 5.1* 5.1* * 6.2* 5.7* 5.7* 4.4* 4.4* * 8.7* 7.1* 7.1* 5.9* 5.9* 4.2* 4.2* * 8.1* 8.6* 8.6* 6.5* * * 4.2* * 11.5* 9.7* 9.2* 7.0* * * * 14.7* 10.0* * * * 16.4* 10.2* * * * 16.9* 9.8* * At ax reach * 5.2* 3.4* 3.4* * 5.3* 5.0* * * 6.7* 6.5* * * * * * * 3.5* 5.0* * * 9.1* 9.4* * * * 9.3* 9.9* * * * * * * * At ax reach * 5.2* 3.4* 3.4* * 5.3* 5.0* 5.0* 3.0* 3.0* * 6.7* 6.5* 6.5* 5.6* 5.6* 3.2* 3.2* 2.9* 2.9* * 10.2* 8.1* 8.1* 6.2* * * 2.9* * 11.7* 9.4* * * * 3.1* * 14.0* 9.9* * * * 3.4* * 16.2* 10.1* 9.4* 7.3* * 4.1* * 16.8* 10.4* * At ax reach * 3.3* * 3.3* 2.5* 2.5* * * 2.2* * 4.8* 4.8* * * * * * * * * * * * * 9.1* 9.7* * * * * * * * * * At ax reach * 3.3* * 3.3* 2.5* 2.5* * 4.2* 2.2* 2.2* * 4.8* 4.8* 4.8* 3.8* 3.8* 2.1* 2.1* * 11.1* 7.4* 7.4* 5.8* 5.8* 4.7* * 2.1* * 11.4* 8.9* 8.9* 6.5* * * 2.2* * 13.0* 9.7* * * * 2.4* * 15.5* 9.9* 9.2* 7.1* * * 2.8* * 16.4* 10.2* * * 4.2* The above loads (kg) are copliant to the ISO standards and refer to the excavator equipped with bucket. The indicated loads are no ore than 87% of hydraulic syste lift capacity or 75% of static tipping load. Values arked with an asterisk (*) are liited by the hydraulic lifting capacity rather than the tipping load.

15 MONO BOOM - DIPPERSTICK AXLE At ax reach * 4.5* * * * * FRONT BLADE+REAR STAB. DOWN At ax reach * 4.5* * 5.3* 4.0* 4.0* * 7.3* 6.1* * 3.9* * * * * * * * * * * * 11.2* 9.4* * * * 9.8* 7.4* 7.4* 5.5* 5.5* 5.6 MONO BOOM - DIPPERSTICK AXLE At ax reach * 3.0* * * 2.7* * * * * * 6.0* * * FRONT BLADE+REAR STAB. DOWN * 3.0* * 4.6* 2.7* 2.7* * 6.7* 5.8* * 2.6* * 8.3* 6.4* * * 2.7* * * * * 2.9* * 6.0* 10.1* * * * 3.3* * 10.5* 9.6* * * * 11.1* 8.1* * * MONO BOOM - DIPPERSTICK AXLE At ax reach * 2.5* 2.2* 2.2* * * 1.9* * * * 1.9* * * * * 6.3* * * * * * FRONT BLADE+REAR STAB. DOWN At ax reach At ax reach * 2.5* 2.2* 2.2* * 4.1* 1.9* 1.9* * 4.9* 3.3* 3.3* 1.9* 1.9* * 12.0* 7.6* 7.6* 6.0* * * 1.9* * * * * 2.0* * 6.3* 10.0* * * * 2.3* * 9.4* 9.8* * * * 2.8* * 12.4* 8.6* * * 3.7* 6.7 LIFTING CAPACITY WX At ax reach * 4.5* * * * * * * * * * * * * * * * * * * * * * At ax reach * 4.5* * 5.3* 4.0* 4.0* * 7.3* 6.1* 6.1* 3.9* 3.9* * 8.8* 6.7* * 4.0* * * * * 4.3* * * * * 11.2* 9.4* * * * 9.8* 7.4* 7.4* 5.5* 5.5* At ax reach * 3.0* * * 2.7* * * * 2.6* * * * * * * * * 6.0* 10.1* * * * * * * * * * At ax reach * 2.5* 2.2* 2.2* * * 1.9* * * * 1.9* * * * * * 1.9* * * * 2.0* * 6.3* 10.0* * * * * * * * * * At ax reach * 3.0* * 4.6* 2.7* 2.7* * 6.7* 5.8* 5.8* 2.6* 2.6* * 8.3* 6.4* * 4.4* 2.7* 2.7* * * * * 2.9* * 6.0* 10.1* * * * 3.3* * 10.5* 9.6* * * 4.1* * 11.1* 8.1* 8.1* 5.6* 5.6* 5.5* 5.5* At ax reach * 2.5* 2.2* 2.2* * 4.1* 1.9* 1.9* * 4.9* 3.3* 3.3* 1.9* 1.9* * 12.0* 7.6* 7.6* 6.0* 6.0* 4.5* * 1.9* * 9.2* 6.7* * * 2.0* * 6.3* 10.0* * * * 2.3* * 9.4* 9.8* * * 3.8* 2.8* 2.8* * 12.4* 8.6* 8.6* 6.2* * 3.7* 6.7 The above loads (kg) are copliant to the ISO standards and refer to the excavator equipped with bucket. The indicated loads are no ore than 87% of hydraulic syste lift capacity or 75% of static tipping load. Values arked with an asterisk (*) are liited by the hydraulic lifting capacity rather than the tipping load. 15

16 16 LIFTING CAPACITY WX188 TRIPLE ARTICULATION - DIPPERSTICK AXLE 2.75 FRONT BLADE+REAR STAB. DOWN At ax reach * * * * 8.7* 7.1* * 8.1* * * At ax reach * 6.3* 5.1* 5.1* * 6.2* 5.7* * 4.4* * 8.7* 7.1* 7.1* 5.9* * * 8.1* 8.6* * * * * 11.5* 9.7* * * * * 14.7* 10.0* * * * * * * * * * TRIPLE ARTICULATION - DIPPERSTICK AXLE At ax reach * 5.2* 3.4* 3.4* * 5.3* * * 6.7* 6.5* * * * * * FRONT BLADE+REAR STAB. DOWN At ax reach * 5.2* 3.4* 3.4* * 5.3* 5.0* 5.0* 3.0* 3.0* * 6.7* 6.5* 6.5* 5.6* 5.4* 3.2* 3.2* 2.9* 2.9* * 10.2* 8.1* * * * 2.9* * 11.7* 9.4* * * * 3.1* * 14.0* 9.9* * * * * 16.0* 10.1* * * * 16.8* 10.4* * TRIPLE ARTICULATION - DIPPERSTICK AXLE 2.75 FRONT BLADE+REAR STAB. DOWN At ax reach * 3.3* * 3.3* 2.5* 2.5* * * 2.2* * 4.8* 4.8* * * * * * * * * * * At ax reach * 3.3* * 3.3* 2.5* 2.5* * 4.2* 2.2* 2.2* * 4.8* 4.8* 4.8* 3.8* * 2.1* * 11.1* 7.4* 7.4* 5.8* * * 2.1* * 11.4* 8.9* * * * 2.2* * 13.0* 9.7* * 5.2* 5.5* * 2.4* * 15.5* 9.9* * * * 2.8* * 16.3* 10.2* * 4.9* 4.2* 4.2* At ax reach * 5.2* 3.4* 3.4* * 5.3* 5.0* * 3.0* * 6.7* 6.5* 5.9* 5.6* 3.9* 3.2* * * 10.2* 8.1* * * * * * * * * * * * * * * * * * At ax reach * 5.2* 3.4* 3.4* * 5.3* 5.0* 5.0* 3.0* 3.0* * 6.7* 6.5* 6.5* 5.6* 5.6* 3.2* 3.2* 2.9* 2.9* * 10.2* 8.1* 8.1* 6.2* * 4.3* 2.9* 2.9* * 11.7* 9.4* 9.2* 6.9* * * 3.1* * 14.0* 9.9* * * * 3.4* * 16.2* 10.1* * * 4.1* * 16.8* 10.4* * At ax reach * * * * * * 8.7* 7.1* * * * 8.1* 8.6* * * * * * * * * * * * * * * * * At ax reach * 6.3* 5.1* 5.1* * 6.2* 5.7* 5.7* 4.4* 4.4* * 8.7* 7.1* 7.1* 5.9* 5.9* 4.2* 4.2* * 8.1* 8.6* 8.6* 6.5* * * 4.2* * 11.5* 9.7* * * * * 14.7* 10.0* * * * 16.4* 10.2* * * * 16.9* 9.8* * At ax reach * 3.3* * 3.3* 2.5* 2.5* * * 2.2* * 4.8* 4.8* * * 2.1* * 10.4* 7.4* * * * * 10.1* 8.9* * 3.8* * * * * * * * * * * * * At ax reach * 3.3* * 3.3* 2.5* 2.5* * 4.2* 2.2* 2.2* * 4.8* 4.8* 4.8* 3.8* 3.8* 2.1* 2.1* * 11.1* 7.4* 7.4* 5.8* 5.8* 4.7* * 2.1* * 11.4* 8.9* 8.9* 6.5* * * 2.2* * 13.0* 9.7* 9.1* 7.0* * * 2.4* * 15.5* 9.9* * * * 2.8* * 16.4* 10.2* * * 4.2* 6.4 The above loads (kg) are copliant to the ISO standards and refer to the excavator equipped with bucket. The indicated loads are no ore than 87% of hydraulic syste lift capacity or 75% of static tipping load. Values arked with an asterisk (*) are liited by the hydraulic lifting capacity rather than the tipping load.

17 WHEELED EXCAVATORS WX218 SPECIFICATIONS ENGINE Net fl ywheel power (ISO 14396/ECE R120) 129 kw / 173 hp Rated 2000 rp Make and odel F4GE9684G J666 Type Water-cooled, 6 cylinder direct injection type diesel engine with intercooler turbo-charger Displaceent l Nuber of cylinders 6 Bore x stroke 104 x 132 Maxiu torque at 1200 rp 745 N ELECTRICAL SYSTEM Voltage 24 V Batteries 2 x 12 V Battery rating (each) 100 Ah Alternator 70 A Starter otor 4 kw TRANSMISSION k/h k/h Max Road travel speed Max Field travel speed 5 9 Creep speed Maxiu drawbar pull 121 kn Power shift ulti-disc gearbox shiftable under load Autoatic or anual gear shift control. Travel ode autoatically engaged by pressing accelerator pedal. HYDRAULIC SYSTEM 2 x Priary pups 3 variable displaceent, axial piston Total axiu fl ow 512 l/in (2 x ) Auxiliary low fl ow, optional (on/off) 22 l/in Auxiliary ediu fl ow, optional (proportional) 80 l/in Ipleent/travel pressure 340 / 370 bar PowerBoost 370 bar Swing circuit pressure 360 / 390 bar Pilot pup 45 bar Boo cylinder ono 120 x 1290 Boo cylinder 2-piece boo 120 x 990 Ar cylinder 135 x 1560 Bucket cylinder 120 x 1080 Positioning cylinder 170 x 640 Cylinder end stroke daping. Electrohydraulic servo-control. Three-pup hydraulics with two ain pups and separate swing pup. 8 selectable power stages with peranent Power Boost in lift stages: Low idle, Lift 1, Lift 2, Eco 1, Eco 2, Eco 3, Heavy, Roadtravel Adjustable swing acceleration (power) and deceleration (brake) Autoatic power increase in the drive ode. SWING DRIVE Swing speed 9 rp Swing torque 58 kn The swing function is operated bu a hydraulic closed circuit coupled with a echanical reducer integrating an autoatic static brake. The hudrostatic swing brake is adjustable in 3 settings. BRAKES Service brakes: Play free, oil bath ulti disc type integrated operating at 75 bar. Work brake: Acts on service brakes and locks front axle oscillation. Parking brake: Spring type echanical action on the transisssion in all four wheel hubs Eergency brake: Double braking circuit and autoatic parking and brake actuation with the engine shut down STEERING Type ORBITROL with safety valve Pup gear type Steering cylinder double effect, integrated in axle TYRES Twin tyres / Single tyres / / Tyre availability can be liited by local hoologation. CAPACITIES Engine oil 8/15 l Cooling syste 11 l Fuel tank 296 l Hydraulic syste (incl. tank) 270 l for ono 290 l for triple articulation 17

18 GENERAL DIMENSIONS WX218 equipped with twin tires A B / /2720 TRIPLE ARTICULATION 5.5 MONOBOOM 5.6 Ar 2.10 Ar 2.40 Ar 2.94 Ar 2.10 Ar 2.40 Ar 2.94 A B with rear blade B with rear stabilizers OPERATING WEIGHT WX axle width include bucket 800 kg and quick coupler 250 kg (with ) TRIPLE ARTICULATION MONOBOOM Ar 2.10 Ar 2.40 Ar 2.94 Ar 2.10 Ar 2.40 Ar 2.94 Rear blade kg kg kg kg kg kg Stabilizers kg kg kg kg kg kg Rear Blade and stabilizers kg kg kg kg kg kg Stabilizers rear and front kg kg kg kg kg kg 2.75 axle width include bucket 800 kg and quick coupler 250 kg (with ) TRIPLE ARTICULATION MONOBOOM Ar 2.10 Ar 2.40 Ar 2.94 Ar 2.10 Ar 2.40 Ar 2.94 Rear blade kg kg kg kg kg kg Stabilizers kg kg kg kg kg kg Rear Blade and stabilizers kg kg kg kg kg kg Stabilizers rear and front kg kg kg kg kg kg 18

19 PERFORMANCE DATA WX218 TRIPLE ARTICULATION MONOBOOM G G E E D D F F H H C C C C B B A A B C C D E F G H A TRIPLE ARTICULATION Ar 2.10 Ar 2.40 Ar Max. digging reach Max. digging reach at ground level Max. digging depth Max. depth of cut for 8 level botto Max. digging height Min. front swing radius Max. loading height swing radius at ax height Max. loading height (ar retracted) Ar MONOBOOM Ar Ar DIGGING FORCE - ISO WX218 Ar digging force - with auto power boost Bucket digging force - with auto power boost Ar kn 152 kn 156 kn 169 kn Ar kn 133 kn 156 kn 170 kn Ar kn 111 kn 156 kn 170 kn 19

20 LIFTING CAPACITY WX218 TRIPLE ARTICULATION - DIPPERSTICK At ax reach * * * * * * REAR BLADE+FRONT STAB. DOWN At ax reach * 7.2* 7.3* 7.3* * 7.1* 6.5* * * 8.1* 6.7* * * * * * * 12.2* 11.0* * * * * 16.4* 11.4* 8.9* 8.3* * * * * * * * TRIPLE ARTICULATION - DIPPERSTICK At ax reach * * * * * * * * REAR BLADE+FRONT STAB. DOWN At ax reach * 6.6* 6.7* 6.7* * 6.7* 6.1* * * 10.6* 7.7* 7.7* 6.5* * * 10.4* 9.3* * * * * 13.1* 10.8* * * * * 16.1* 11.3* * * * * * * * * * TRIPLE ARTICULATION - DIPPERSTICK At ax reach * 6.0* * * * * * * * * * REAR BLADE+FRONT STAB. DOWN At ax reach * 6.0* * 5.3* 4.6* 4.6* * 5.6* 4.1* 4.1* * 6.9* 6.0* 6.0* 5.4* * * 13.1* 8.6* 8.6* 6.7* * * * 13.0* 10.2* * * * * 15.2* 11.1* * 5.9* 6.4* * * 17.2* 11.3* * * * * * At ax reach * * * * * * * * * 6.1* 7.4* * * * * * * * * * * * * * * * * At ax reach * 7.2* 7.3* 7.3* * 7.1* 6.5* 6.5* 6.6* * 8.1* 6.7* 6.7* 6.2* * 9.7* 7.4* * * * 12.2* 11.0* * * * * 16.4* 11.4* * * 18.4* 11.6* * * * 19.2* 12.0* At ax reach * 6.6* 6.7* * * * * 10.6* 7.7* * * * 10.4* 9.3* * * * * * 6.0* 7.8* * * * * * * * * * * * * At ax reach * 6.6* 6.7* 6.7* * 6.7* 6.1* 6.1* 6.0* 6.0* * 10.6* 7.7* 7.7* 6.5* 6.5* 5.7* * 10.4* 9.3* 9.3* 7.1* 7.0* 6.0* * * 13.1* 10.8* * * * * 16.1* 11.3* * * * * 18.3* 11.5* 10.9* 8.5* * * 19.0* 11.8* * At ax reach * 6.0* * * * 4.3* 4.1* * * * * * * 6.1* 6.7* * * * * * * * * * 6.0* 8.1* * * * * * * * * * At ax reach * 6.0* * 5.3* 4.6* 4.6* * 5.6* 4.1* 4.1* * 6.9* 6.0* 6.0* 5.4* * 4.0* * 13.1* 8.6* 8.6* 6.7* 6.7* 5.7* * 4.0* * 13.0* 10.2* 10.2* 7.5* * * * 15.2* 11.1* * * * * 17.9* 11.3* 10.6* 8.2* * * 18.4* 11.7* * The above loads (kg) are copliant to the ISO standards and refer to the excavator equipped with bucket. The indicated loads are no ore than 87% of hydraulic syste lift capacity or 75% of static tipping load. Values arked with an asterisk (*) are liited by the hydraulic lifting capacity rather than the tipping load.

21 MONO BOOM - DIPPERSTICK At ax reach * * * * * REAR BLADE+FRONT STAB. DOWN At ax reach * 7.8* 7.5* * 8.1* 7.0* * * * * * * * * * * * * * * * * 10.1* 9.5* * * * 7.1* 4.9* 4.9* 4.8* 4.8* 6.1 MONO BOOM - DIPPERSTICK At ax reach * * * * REAR BLADE+FRONT STAB. DOWN At ax reach * 7.3* 6.2* 6.2* * 7.6* 6.7* * * 8.9* 7.1* * * * * * * * * * * * * * * * 10.7* 9.9* * * * 9.5* 7.8* 7.8* 5.7* * MONO BOOM - DIPPERSTICK At ax reach * 5.6* 5.0* 5.0* * * * * 5.6* * * REAR BLADE+FRONT STAB. DOWN At ax reach * 5.6* 5.0* 5.0* * 5.7* 4.2* 4.2* * * 4.2* 3.9* 3.9* * 11.0* 8.1* 8.1* 6.7* * * * * * * * * * * * 5.6* 11.2* * * * * 10.4* 10.4* * * * * 11.3* 8.7* * * At ax reach LIFTING CAPACITY WX At ax reach * * * * * * * * * * * * * * * * * * * * * * At ax reach * 7.8* 7.5* 7.5* * 8.1* 7.0* 7.0* 6.8* * 9.2* 7.3* * * * * * * * * * * * * * 10.1* 9.5* 9.5* 7.3* * * 7.1* 4.9* 4.9* 4.8* 4.8* At ax reach * * * * * * * * * * * * * * * * * * * * * * * * At ax reach * 7.3* 6.2* 6.2* * 7.6* 6.7* 6.7* 5.6* * 8.9* 7.1* * * * 10.4* 7.7* * * * * * * * * * * * 10.7* 9.9* 9.9* 7.5* * * 9.5* 7.8* 7.8* 5.7* 5.7* 5.0* 5.0* * 5.6* 5.0* 5.0* * * * * * * 11.0* 8.1* * * * * * * * * * * * 5.6* 11.2* * * * * * * * * * * * At ax reach * 5.6* 5.0* 5.0* * 5.7* 4.2* 4.2* * 6.2* 4.2* 4.2* 3.9* 3.9* * 11.0* 8.1* 8.1* 6.7* 6.7* 5.9* * 3.8* * 9.8* 7.4* * * 3.9* * * * * * 5.6* 11.2* * * * * 10.4* 10.4* * * * * 11.3* 8.7* 8.7* 6.5* * 4.9* 7.0 The above loads (kg) are copliant to the ISO standards and refer to the excavator equipped with bucket. The indicated loads are no ore than 87% of hydraulic syste lift capacity or 75% of static tipping load. Values arked with an asterisk (*) are liited by the hydraulic lifting capacity rather than the tipping load. 21

22 LIFTING CAPACITY WX218 TRIPLE ARTICULATION - DIPPERSTICK 2.10 M - AXLE At ax reach * * * * * * REAR BLADE+FRONT STAB. DOWN At ax reach * 7.2* 7.3* 7.3* * 7.1* 6.5* * * 8.1* 6.7* * * * * * * 12.2* 11.0* * * * * 16.4* 11.4* * * * 18.4* 11.6* * * * 19.2* 12.0* TRIPLE ARTICULATION - DIPPERSTICK 2.40 M - AXLE At ax reach * * * 10.6* 7.7* * * 10.4* * * * REAR BLADE+FRONT STAB. DOWN At ax reach * 6.6* 6.7* 6.7* * 6.7* 6.1* 6.1* 6.0* * 10.6* 7.7* 7.7* 6.5* * * 10.4* 9.3* * * * * 13.1* 10.8* 9.1* 7.8* 6.1* 6.4* * * 16.1* 11.3* 9.2* 8.2* * * * 18.3* 11.5* * * * 19.0* 11.8* * TRIPLE ARTICULATION - DIPPERSTICK 2.94 M - AXLE At ax reach * 6.0* * * * * * * * * * * REAR BLADE+FRONT STAB. DOWN At ax reach * 6.0* * 5.3* 4.6* 4.6* * 5.6* 4.1* 4.1* * 6.9* 6.0* 6.0* 5.4* * 4.0* * 13.1* 8.6* 8.6* 6.7* 6.1* 5.7* * * 13.0* 10.2* * * * * 15.2* 11.1* * * * * 17.9* 11.3* * * * 18.5* 11.7* * At ax reach * * * 7.1* 6.5* * * * * * * * * * * * * * * * * * * * * * * At ax reach * 7.2* 7.3* 7.3* * 7.1* 6.5* 6.5* 6.6* 6.6* * 8.1* 6.7* 6.7* 6.2* * 9.7* 7.4* * * * 12.2* 11.0* * * * * 16.4* 11.4* 10.6* 8.3* * * 18.4* 11.6* * * * 19.2* 12.0* At ax reach * 6.6* 6.7* * 6.7* 6.1* * * 10.6* 7.7* * * * 10.4* 9.3* * 4.6* 6.0* * * * * * * * * * * * * * * * * At ax reach * 6.6* 6.7* 6.7* * 6.7* 6.1* 6.1* 6.0* 6.0* * 10.6* 7.7* 7.7* 6.5* 6.5* 5.7* * 10.4* 9.3* 9.3* 7.1* * * * 13.1* 10.8* 10.6* 7.8* * * * 16.1* 11.3* * * * * 18.3* 11.5* 10.9* 8.5* * * 19.0* 11.8* * At ax reach * 6.0* * * * * * 6.9* 6.0* * * * * * * * * * * * * * * * * * * * * * * * * At ax reach * 6.0* * 5.3* 4.6* 4.6* * 5.6* 4.1* 4.1* * 6.9* 6.0* 6.0* 5.4* * 4.0* * 13.1* 8.6* 8.6* 6.7* 6.7* 5.7* * 4.0* * 13.0* 10.2* 10.2* 7.5* 6.9* 6.0* * 4.1* * 15.2* 11.1* 10.5* 8.1* 6.9* 6.4* * * 17.9* 11.3* * * * 18.5* 11.7* * The above loads (kg) are copliant to the ISO standards and refer to the excavator equipped with bucket. The indicated loads are no ore than 87% of hydraulic syste lift capacity or 75% of static tipping load. Values arked with an asterisk (*) are liited by the hydraulic lifting capacity rather than the tipping load.

23 MONO BOOM - DIPPERSTICK 2.10 M - AXLE At ax reach * * * * * REAR BLADE+FRONT STAB. DOWN At ax reach * 7.8* 7.5* * 8.1* 7.0* * * 9.2* 7.3* * * * * * * * * * * * * * 10.1* 9.5* * * * 7.1* 4.9* 4.9* 4.8* 4.8* 6.1 MONO BOOM - DIPPERSTICK 2.40 M - AXLE At ax reach * * * * REAR BLADE+FRONT STAB. DOWN At ax reach * 7.3* 6.2* 6.2* * 7.6* 6.7* * * 8.9* 7.1* * * * * * * * * * * * * * * * 10.7* 9.9* * * * 9.5* 7.8* 7.8* 5.7* * 5.0* 6.4 MONO BOOM - DIPPERSTICK 2.94 M - AXLE At ax reach * 5.6* 5.0* 5.0* * * 11.0* 8.1* * 5.6* * * REAR BLADE+FRONT STAB. DOWN At ax reach * 5.6* 5.0* 5.0* * 5.7* 4.2* 4.2* * 6.2* 4.2* 4.2* 3.9* 3.9* * 11.0* 8.1* 8.1* 6.7* * * * * * * * * * * * 5.6* 11.2* * * * * 10.4* 10.4* * * * * 11.3* 8.7* * * LIFTING CAPACITY WX * * * * * * * * * * * * * * * * 10.1* 9.5* * * * * * At ax reach * 7.8* 7.5* 7.5* * 8.1* 7.0* 7.0* 6.8* * 9.2* 7.3* * * * * * * * * * * * * * 10.1* 9.5* 9.5* 7.3* * * 7.1* 4.9* 4.9* 4.8* 4.8* At ax reach * * * * * * * * * * * * * * * * * * * * * * 9.5* 7.8* * * At ax reach * 7.3* 6.2* 6.2* * 7.6* 6.7* 6.7* 5.6* 5.6* * 8.9* 7.1* 7.1* 6.2* * * 10.4* 7.7* * * * * * * * * * * * 10.7* 9.9* 9.9* 7.5* * * 9.5* 7.8* 7.8* 5.7* 5.7* 5.0* 5.0* At ax reach At ax reach * 5.6* 5.0* 5.0* * * * * * * 11.0* 8.1* * * * * * * * * * * * 5.6* 11.2* * * * * * * * * * * * At ax reach * 5.6* 5.0* 5.0* * 5.7* 4.2* 4.2* * 6.2* 4.2* 4.2* 3.9* 3.9* * 11.0* 8.1* 8.1* 6.7* 6.7* 5.9* * 3.8* * 9.8* 7.4* * * 3.9* * * * * * 5.6* 11.2* * * * * 10.4* 10.4* * * * * 11.3* 8.7* 8.7* 6.5* * 4.9* 7.0 The above loads (kg) are copliant to the ISO standards and refer to the excavator equipped with bucket. The indicated loads are no ore than 87% of hydraulic syste lift capacity or 75% of static tipping load. Values arked with an asterisk (*) are liited by the hydraulic lifting capacity rather than the tipping load. 23

24 For No GB - Printed in Italy - MediaCross Firenze - 01/17 CNH INDUSTRIAL DEUTSCHLAND GMBH Case Bauaschinen Benzstr D Heilbronn DEUTSCHLAND CNH INDUSTRIAL FRANCE, S.A Rue des Rochettes Morigny-Chapigny FRANCE CNH INDUSTRIAL - UK First Floor, Barclay Court 2, Heavens Walk, Doncaster - DN4 5HZ UNITED KINGDOM CNH INDUSTRIAL - SOUTH AFRICA Waterfall Business Park Bekker Street, Howick Close 1685 Midrand - Johannesburg REPUBLIC OF SOUTH AFRICA CNH INDUSTRIAL MAQUINARIA SPAIN, S.A. Avda. José Gárate, Coslada (Madrid) ESPAÑA CNH INDUSTRIAL ITALIA SPA Strada di Settio, San Mauro Torinese (TO) ITALIA CASE CUSTOMER CENTRE PARIS RN Penchard Monthyon FRANCE CNH INDUSTRIAL - MIDDLE EAST DAFZA Dubai Airport Free Zone West Wing 4 B, Office 642 P.O. Box 54588, Dubai, UNITED ARAB EMIRATES NOTE: Standard and optional fittings can vary according to the deands and specific regulations of each country. The illustrations ay include optional rather than standard fittings - consult your Case dealer. Furtherore, CNH Industrial reserves the right to odify achine specifications without incurring any obligation relating to such changes. Confors to directive 2006/42/EC The call is free fro a land line. Check in advance with your Mobile Operator if you will be charged. Toll free nuber not available fro all calling areas.