OPERATING WEIGHT kg NET POWER 11,2 kw / rpm BUCKET CAPACITY 0,03 0,06 m3 PC18MR-2 18MR-2. Mini-Excavator PC18MR-2

Transcription

1 PC18MR-2 OPERATING WEIGHT kg NET POWER 11,2 kw / rpm BUCKET CAPACITY 0,03 0,06 m3 PC 18MR-2 Mini-Excavator PC18MR-2

2 PC18MR-2 M INI-EXCAVATOR WALK-AROUND Tradition and Innovation The new compact mini-excavator is the product of the competence and the technology that KOMATSU has been acquiring for over the past eighty years. The project has been developed with a constant attention to the needs of customers from all over the world; the result is a user-friendly machine, which offers top class performance. Performance The new short tail PC18MR-2 supplies optimal power and digging speed in confined spaces: yards, road work, wherever traditional machines cannot work. Sturdiness and excellent stability ensure safety and confidence in any condition. Versatility Many available configurations allow the operator to choose the right machine for the specific job: short or long arm, canopy or cab, rubber or steel shoes, extra counterweight. Komatsu CLSS The CLSS (Closed Load Sensing System) hydraulic circuit guarantees power, speed and perfect control to all movements, including the combined ones. The main feature of this system is the connection between the variable displacement pump and the closed-centre circuit with load sensing, which allows operators to perform all movements with maximum efficiency, regardless of the load or the rpm. These characteristics are highlighted by the hydraulic servo-controls, which are by far the easiest to use and require minimum efforts to perform extremely precise manoeuvres. Comfort Despite its compact size, the PC18MR-2 offers a comfort which has no equals. Thanks to the wide operator space, excellent accessibility to the seat both for canopy and cab version, large floor free from obstacles, adjustable seat and ergonomic position of all the controls, the comfort of this new miniexcavator can be compared to the one of higher category. 2

3 MINI-EXCAVATOR PC18MR-2 OPERATING WEIGHT kg NET POWER 11,2 kw / rpm Moreover, the 1 / 2 way auxiliary hydraulic circuit consents to use multiple working tools, like the hammer, the clamshell bucket, the auger, etc. BUCKET CAPACITY 0,03 0,06 m 3 Maintenance All periodic inspection points are easily accessible through the bonnets. In addition, extra-ordinary maintenance can be performed by simply tilting the canopy upwards: under the floor, the operator can find all major hydraulic components, like the main valve or the swing motor. ORFS hydraulic face seal connectors and DT electric connectors improve the reliability of the machine and make repairs easier and faster. Special technical solutions have allowed to extend up to 500 hours the intervals for most ordinary maintenance operations, such as pin greasing or engine oil replacement. Also, to avoid possible leakage, all tanks are equipped with a draining hose: this confirms once again the attention KOMATSU pays to the environment. 3

4 PC18MR-2 M INI-EXCAVATOR OPERATOR'S ENVIRONMENT Designed with the utmost attention to detail, the operator s environment ensures that comfort, accessibility and visibility are not compromised. The two pole canopy, or the cab with the wide sliding door, allows easy access to and from the machine. Once seated the spacious and obstacle free floor grants even the tallest operator room to move his legs. The operator s environment is further complemented by the adjustable seat and the ergonomic PPC controls. Two speed tracking is operated by a switch located on the dashboard where it is possible to monitor all the machine functions. 4

5 MINI-EXCAVATOR PC18MR-2 STRONG POINTS Engine The KOMATSU engine supplies the required power, keeping the fuel consumption very low. By taking advantage of state of the art technologies, it ensures minimum levels of noise and emissions (STAGE 2). Automatic Shift Down Once turned on, this device automatically adjusts the hydraulic travel motor to the working conditions: maximum displacement for faster movements, minimum displacement for top drawbar pull. This process doesn t require operator s support. Attachment Line The 1 / 2 way auxiliary hydraulic circuit allows the use of several tools for different purposes: hammer, clamshell bucket, and so on. The switching between the two options is realised simply by means of a cock, which is located on the side of the machine and right behind a little bonnet. Variable Undercarriage For the applications requiring maximum versatility in terms of size and stability, the PC18MR-2 is equipped with standard hydraulic extension of the undercarriage, which can be easily obtained by operating a push button and the blade control lever from the driver s seat. This device allows to shift from the maximum stability configuration, for working, to the minimum width, less than one meter, to drive through restricted passages or doors. Reliability and Operability Particular technical solution contribute to increase the sturdiness and the operability of the machine. Among these, we can highlight the cast swing support, that confers extreme rigidity to the structure, and the boom, that lodges the hydraulic hoses, protecting them from possible damages, guaranteeing the best visibility over the digging area. 5

6 PC18MR-2 M INI-EXCAVATOR DIMENSIONS & WORKING RANGE BUCKET RANGE R Width mm Capacity m 3 (ISO7451) Weight kg No. of teeth 465 R , , , , (3.665) (2.915) , PC18MR-2 with: Canopy, Rubber Shoes, 350 mm Bucket, Blade Down, Undercarriage Extended (1.770) (1.435) A - Distance from machine s center B - Height at bucket pin Arm length 965 mm A 2 m 3 m Max. Outreach (3.820) (2.815) B Front. 360 Front. 360 Front m (*) (*) m (*) (*) (*) m (*) (*) (*) (2.410) (2.000) (4.190) (4.270) m (*) (*) (*) Unit = kgf Arm length mm A 2 m 2,5 m 3 m Max. Outreach B Front. 360 Front. 360 Front. 360 Front m (*) (*) (*) m (*) (*) (*) (*) m (*) (*) (*) (*) m (*) (*) (*) (*) Unit = kgf NOTE: Ratings are based on ISO standard Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. - The values marked with an asterisk (*) are limited by the hydraulic capacities - Calculations are based on the machine resting on a uniform and firm surface - The lifting point is a hypothetical hook placed behind the bucket. 6

7 MINI-EXCAVATOR PC18MR-2 SPECIFICATIONS ENGINE The new generation engine has been developed to comply with the strictest emission controls (STAGE 2). Model... Komatsu 3D67E-1 Type... emissionised 4-cycle diesel engine Displacement cm 3 No. of cylinders... 3 Net power (SAE J1349)... 11,2 kw / rpm Max. torque... 45, rpm Cooling system... water Air.lter type... dry Starting... electric motor with pre-heating air system for cold climate SWING SYSTEM The rotation is operated by means of an orbital hydraulic motor. Single ball-bearing ring with internal, induction hardened toothring. Centralised lubrication of the unit. Swing speed...8,9 rpm IMPIANTO BLADE ELETTRICO OPERATING WEIGHT Type... electro-welded, single unit structure with extensions Width x height (980) x 250 mm Max. lifting above ground level mm Max. depth below ground level mm Operating weight with standard bucket, fully serviced, +80 kg operator (ISO 6016). Operating weight with rubber shoes kg Operating weight with steel shoes kg Heated cab weight kg (optional) Additional counterweight kg IMPIANTO UNDERCARRIAGE ELETTRICO Track rollers (each side)... 3 Shoe width mm Ground pressure (standard)...0,28 kg/cm 2 Standard hydraulically operated track extension HYDRAULIC SYSTEM Type... Komatsu CLSS Main pump... 1 x piston pump Max. pump.flow... 40,8 ltr/min Max. operating pressure MPa (230 bar) Bucket digging force (ISO 6015) dan (1.620 kg) Arm crowd force (ISO 6015): 965 mm arm dan (1.010 kg) mm arm dan (865 kg) The digging equipment is fully controlled by PPC servo-controls. All movements are stopped by lifting the safety levers on the tiltable case. IMPIANTO ELECTRIC ELETTRICO SYSTEM Voltage V Battery Ah Alternator A Starter motor... 1,2 kw IMPIANTO TRANSMISSION ELETTRICO Type... 2 speed hydrostatic transmission, controlled and steered by means of two levers and two pedals Hydraulic motors... 2 x axial pistons Reduction system... planetary gear Max. drawbar pull dan (1.805 kgf) Travel speed...2,3-4,3 km/h IMPIANTO SERVICE CAPACITIES ELETTRICO Fuel tank ltr Radiator and system... 3,1 ltr Engine oil (refill)... 3,3 ltr Hydraulic system (refill)... 1,2 ltr 7

8 PC18MR-2 MINI-EXCAVATOR STANDARD EQUIPMENT ROPS (ISO 3471) FOPS (ISO 10262) canopy Rubber shoes 965 mm digging arm Two speeds with Automatic Shift Down Variable undercarriage Blade 1 / 2 way auxiliary hydraulic circuit for attachments up to the boom Adjustable seat Lifting cylinder guard Working light on boom OPTIONAL EQUIPMENT ROPS (ISO 3471)/ FOPS (ISO 10262) tiltable cab with heating Steel shoes mm digging arm Additional counterweight Bucket range ( mm) mm ditch cleaning bucket Travel acoustic alarm Extension of the auxiliary hydraulic circuit up to the arm, with quick couplings Rotating beacon Biodegradable oil Rearview mirrors Manufacturer: Komatsu Utility Europe Head Office via Atheste Este (Padova) - Italy Tel Fax utility@komatsu.it Komatsu Europe International NV Mechelsesteenweg 586 B-1800 VILVOORDE (BELGIUM) Tel Fax WESS /2005 Materials and specifications are subject to change without notice. is a trademark of Komatsu Ltd. Japan. Printed in Europe This specification sheet may contain attachments and optional equipment that are not available in your area. Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.