316E L. Hydraulic Excavator

Transcription

1 316E L Hydraulic Excavator Engine Drive Engine Model Cat C4.4 ACERT Maxiu Travel Speed 5.2 k/h 3.2 ph Engine Power ISO kw 119 hp Maxiu Drawbar Pull kn 35,115 f Weights Miniu Operating Weight ,920 Maxiu Operating Weight ,242

2 316E L Hydraulic Excavator Specifications Engine Swing Mechanis Engine Model Cat C4.4 ACERT Swing Speed 9.3 rp Engine Power ISO kw 119 hp Swing Torque 44.7 kn 32,969 f- Bore in Stroke in Service Refill Capacities Displaceent 4.4 L 269 in 3 Fuel Tank Capacity 290 L gal Weights Cooling Syste 24 L 6.34 gal Engine Oil (with filter) 13.5 L 3.57 gal Miniu Operating Weight* ,920 Swing Drive (each) 2.4 L 0.63 gal Maxiu Operating Weight** ,242 Final Drive (each) 5 L 1.32 gal **Long Undercarriage, 5.1 (16'9") reach boo, R2.25 (7'5") Hydraulic Syste (including tank) 190 L gal stick, 2.8 t (3.09 t) counterweight, (0.994 yd 3 ) bucket, Hydraulic Tank 106 L gal 500 (20") TG shoes. ** Long Undercarriage, 5.1 (16'9") reach boo, R2.9 (9'6") Track stick, 2.8 t (3.09 t) counterweight, (0.994 yd 3 ) bucket, 700 (28") TG shoes. Nuber of Shoes (each side) 44 pieces Hydraulic Syste Nuber of Track Rollers (each side) 7 pieces Nuber of Carrier Rollers (each side) 2 pieces Main Syste Maxiu Flow (Total) L/in gal/in Sound Perforance Maxiu Pressure Equipent kpa 5,076 psi ISO 6396 Maxiu Pressure Travel kpa 5,076 psi Operator Sound 71 db(a) Maxiu Pressure Swing kpa 3,278 psi ISO 6395 Pilot Syste Maxiu Flow 25.8 L/in 1,574 in 3 /in Spectator Sound 101 db(a) Pilot Syste Maxiu Pressure 4120 kpa 598 psi Operator Sound The operator sound level is easured according Boo Cylinder Bore in to the procedures specified in ISO 6394:1998, for cab offered by Boo Cylinder Stroke in Caterpillar, when properly installed and aintained and tested with doors and windows closed. Stick Cylinder Bore in Exterior Sound The labeled spectator sound power level is Stick Cylinder Stroke in easured according to the test procedures and conditions specified Bucket Cylinder Bore in in 2004/14/EC. Bucket Cylinder Stroke in Hearing protection ay be needed when operating with an open operator station and cab (when not properly aintained for doors/ Drive windows open) for extended periods or in a noisy environent. Maxiu Travel Speed 5.2 k/h 3.2 ph Standards Maxiu Drawbar Pull kn 35,115 f Brakes ISO ROPS Cab ISO Cab/OPG ISO

3 Diensions All diensions are approxiate Reach Boo 5.1 (16'9") Stick R2.9 (9'6") R2.6 (8'6'') R2.25 (7'4'') 1 Shipping Height* 3090 (10'2") 3090 (10'2") 3090 (10'2") Shipping Height at Boo Top 3080 (10'1") 3020 (9'11") 2920 (9'7") Shipping Height with Guard Rail 3090 (10'2") 3090 (10'2") 3090 (10'2") Shipping Height with Top Guard 3100 (10'2") 3100 (10'2") 3100 (10'2") 2 Shipping Length 8580 (28'2") 8570 (28'1") 8550 (28'1") 3 Tail Swing Radius 2500 (8'2") 2500 (8'2") 2500 (8'2") 4 Length to Center of Rollers 3170 (10'5") 3170 (10'5") 3170 (10'5") 5 Track Length 3970 (13'0") 3970 (13'0") 3970 (13'0") 6 Ground Clearance 440 (1'5") 440 (1'5") 440 (1'5") 7 Track Gauge 1990 (6'6") 1990 (6'6") 1990 (6'6") 8 Transport Width 500 (20") Shoes 2520 (8'3") 2520 (8'3") 2520 (8'3") 600 (24") Shoes 2590 (8'6") 2590 (8'6") 2590 (8'6") 700 (28") Shoes 2690 (8'10") 2690 (8'10") 2690 (8'10") 9 Cab Height 2890 (9'6") 2890 (9'6") 2890 (9'6") Cab Height with Top Guard 3100 (10'2") 3100 (10'2") 3100 (10'2") 10 Counterweight Clearance** 1010 (3'4") 1010 (3'4") 1010 (3'4") Bucket Capacity (General Duty) (0.994 yd 3 ) (0.994 yd 3 ) (0.994 yd 3 ) Bucket Tip Radius 1380 (4'6") 1380 (4'6") 1380 (4'6") *Including shoe lug height. **Without shoe lug height

4 316E L Hydraulic Excavator Specifications Working Ranges All diensions are approxiate. Meters R2.9 R2.6 R Meters Reach Boo 5.1 (16'9") Stick R2.9 (9'6") R2.6 (8'6") R2.25 (7'4") 1 Maxiu Digging Depth 6390 (21'0") 6090 (20'0") 5740 (18'11") 2 Maxiu Reach at Ground Level 8990 (29'6") 8780 (28'10") 8460 (27'9") 3 Maxiu Cutting Height 8880 (29'2") 8920 (29'3") 8740 (28'8") 4 Maxiu Loading Height 6270 (20'7") 6280 (20'7") 6110 (20'1") 5 Miniu Loading Height 2000 (6'7") 2300 (7'7") 2650 (8'8") 6 Maxiu Depth Cut for 2440 (8'0") Level Botto 6160 (20'3") 5870 (19'3") 5500 (18'1") 7 Maxiu Vertical Wall Digging Depth 4910 (16'1") 4930 (16'2") 4490 (14'9") 16

5 Operating Weight and Ground Pressure Reach Boo 5.10 (16'9") 700 (28") 600 (24") 500 (20") Triple Grouser Shoes Triple Grouser Shoes Triple Grouser Shoes kpa psi kpa psi kpa psi R2.9 (9'6") , , , R2.6 (8'6") , , , R2.25 (7'4") , , , All weights are rounded up to nearest 100 and including General Duty (0.994 yd 3 ) bucket (610 [1,344.8 ]). Kg and were rounded up separately so soe of the and do not atch. Actual weight will depend on final achine configuration. Major Coponent Weights Base Machine (with boo cylinder, without counterweight, front linkage and track) ,610 Long Undercarriage ,310 Counterweight 2.8 t (3.09 t) ,170 Boo (includes lines, pins and stick cylinder) Reach Boo 5.10 (16'9") ,910 Stick (includes lines, pins, bucket cylinder, and bucket linkage) R2.9 (9'6") 910 2,010 R2.6 (8'6") 840 1,850 R2.25 (7'4") 810 1,790 Track Shoe (Long/per two tracks) 500 (20") Triple Grouser , (24") Triple Grouser , (28") Triple Grouser ,840 All weights are round up to nearest 10 and except for quick coupler and buckets. Kg and were rounded up separately so soe of the and do not atch. Base achine includes 75 (165 ) operator weight, 90% fuel weight, and undercarriage with center guard. Actual weight will depend on final achine configuration. 17

6 316E L Hydraulic Excavator Specifications Bucket and Stick Forces Reach Boo 5.10 (16'9") Stick R2.9 (9'6") R2.6 (8'6") R2.25 (7'4") General Duty Bucket Digging Force (ISO) 111 kn 25, kn 25, kn 25,000 Stick Digging Force (ISO) 75 kn 16, kn 18, kn 19,800 18

7 Reach Boo Li Capacities Load Point Height Load at Maxiu Reach Load Radius Over Front Load Radius Over Side Stick R2.25 (7'4") Shoes 500 (20") triple grouser 1.5 /5 3.0 / / / *3950 * *3400 * *9,600 *9,600 *7,500 *7, *5000 *5000 * * *10,850 *10,850 *10,000 6,950 *7,200 6, * * *13,450 10,150 10,750 6,700 *7,300 5, * * *16,100 9,500 10,450 6,400 *7,850 5, *5600 * *12,950 *12,950 15,700 9,100 10,200 6,200 8,350 5, *6100 *6100 * *13,600 *13,600 *24,600 16,550 15,550 9,000 10,150 6,150 9,350 5, * * *21,900 16,900 *15,300 9,200 12,200 7, Stick R2.6 (8'6") Shoes 500 (20") triple grouser 1.5 /5 3.0 / / / / *3250 * *7,500 *7,500 *7,300 *7, * *2850 * *6,450 *6,450 *6,350 *6, *4600 *4600 * * *10,000 *10,000 *9,400 7,000 *6,100 5, * * * * *18,850 *18,850 *12,650 10,300 *10,450 6,750 *6,200 4, * * * *15,550 9,600 10,500 6,400 *6,600 4, *6250 * * *14,400 *14,400 15,700 9,100 10,200 6,200 *7,450 4, *5750 *5750 * *12,800 *12,800 *23,100 16,400 15,500 8,950 10,100 6,100 8,650 5, *9950 *9950 * *22,400 *22,400 *23,200 16,700 15,650 9,050 10,850 6, *7750 *7750 * *16,300 *16,300 *11,900 11, *Indicates that the load is liited by hydraulic liing capacity rather than tipping load. The above loads are in copliance with hydraulic excavator li capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liing capacity or 75% of tipping load. Weight of all liing accessories ust be deducted fro the above liing capacities. Liing capacities are based on the achine standing on a fir, unifor supporting surface. The use of a work tool attachent point to handle/li objects, could affect the achine li perforance. Li capacity stays within ± 5% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product inforation. 19

8 316E L Hydraulic Excavator Specifications Reach Boo Li Capacities Load Point Height Load at Maxiu Reach Load Radius Over Front Load Radius Over Side Stick R2.9 (9'6") Shoes 500 (20") triple grouser 1.5 /5 3.0 / / / / *2950 * *6,500 *6, * *2650 * *7,350 7,150 *5,800 *5, * * *8,850 7,050 *5,650 5, *8000 *8000 * * * * *17,000 *17,000 *11,900 10,400 *10,000 6,750 *6,050 4,750 *5,800 4, *7100 *7100 * * *17,000 *17,000 *14,900 9,600 10,450 6,400 7,500 4,600 *6,250 4, *7050 * * *16,150 *16,150 15,650 9,050 10,150 6,100 *7,050 4, *5700 *5700 * *12,750 *12,750 *22,900 16,150 15,400 8,850 10,000 6,000 8,150 4, *9300 *9300 * *20,850 *20,850 *23,950 16,400 15,450 8,900 10,100 6,050 10,050 6, * * * *18,150 17,050 *12,150 9, Stick R2.25 (7'4") Shoes 600 (24") triple grouser 1.5 /5 3.0 / / / *6100 *13,600 *6100 *13,600 *5600 *12,950 * *24,600 * *21,900 *5600 *12, , ,100 *9,600 *5000 *10,850 *6250 *13,450 *7450 *16, , ,750 *7150 *15,300 *9,600 *5000 *10, , , , , ,300 *4600 *10,000 * , , , ,300 *3950 * *3400 * *7,500 *7, * ,000 *7,200 6, * ,750 *7,300 5, * ,500 *7,850 5, ,250 8,450 5, ,200 9,450 5, *12,250 7, *Indicates that the load is liited by hydraulic liing capacity rather than tipping load. The above loads are in copliance with hydraulic excavator li capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liing capacity or 75% of tipping load. Weight of all liing accessories ust be deducted fro the above liing capacities. Liing capacities are based on the achine standing on a fir, unifor supporting surface. The use of a work tool attachent point to handle/li objects, could affect the achine li perforance. Li capacity stays within ± 5% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product inforation. 20

9 Reach Boo Li Capacities Load Point Height Load at Maxiu Reach Load Radius Over Front Load Radius Over Side Stick R2.6 (8'6") Shoes 600 (24") triple grouser 1.5 /5 3.0 / / / / *5750 *5750 *12,800 *12,800 *9950 *9950 *22,400 *22,400 *8850 *18,850 *6250 *14,400 * *23,100 * *23,200 *7750 *16,300 *8850 *18,850 *6250 *14, , ,900 *7750 *16,300 *7,500 *4600 *10,000 *5900 *12,650 *7200 *15, , , ,850 *7,500 *4600 *10, , , , , ,200 *3500 *6,450 *4300 *9,400 *4800 *10, , , ,250 *3250 * *7,300 *7, *2850 * *6,450 *6,350 *6, * ,100 *6,100 5, * ,850 *6,200 5, * * ,500 *6,600 4, * ,250 *7,450 4, ,150 8,750 5, ,000 6, * *11,900 11, Stick R2.9 (9'6") Shoes 600 (24") triple grouser /5 3.0 / / / /25 *2950 * *6,500 *6, * *2650 * *7,350 7,250 *5,800 *5, * * *8,850 7,150 *5,650 5, *8000 *8000 * * * * *17,000 *17,000 *11,900 10,500 *10,000 6,850 *6,050 4,800 *5,800 4, *7100 *7100 * * *17,000 *17,000 *14,900 9,700 10,600 6,500 7,600 4,650 *6,250 4, *7050 * * *16,150 *16,150 15,850 9,150 10,300 6,200 *7,050 4, *5700 *5700 * *12,750 *12,750 *22,900 16,350 15,600 8,950 10,150 6,050 8,250 5, *9300 *9300 * *20,850 *20,850 *23,950 16,600 15,650 9,000 10,250 6,150 10,200 6, * * * *18,150 17,250 *12,150 9, *Indicates that the load is liited by hydraulic liing capacity rather than tipping load. The above loads are in copliance with hydraulic excavator li capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liing capacity or 75% of tipping load. Weight of all liing accessories ust be deducted fro the above liing capacities. Liing capacities are based on the achine standing on a fir, unifor supporting surface. The use of a work tool attachent point to handle/li objects, could affect the achine li perforance. Li capacity stays within ± 5% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product inforation. 21

10 316E L Hydraulic Excavator Specifications Reach Boo Li Capacities Load Point Height Load at Maxiu Reach Load Radius Over Front Load Radius Over Side Stick R2.25 (7'4") Shoes 700 (28") triple grouser with step 1.5 /5 3.0 / / /20 *3950 * *6100 *6100 *13,600 *13,600 *5600 *12,950 * *24,600 * *21,900 *5600 *12, , ,300 *9,600 *5000 *10,850 *6250 *13,450 *7450 *16, , ,000 *7150 *15,300 *9,600 *5000 *10, , , , , ,400 *4600 *10,000 *5050 *10, , , ,450 *3400 * *7,500 *7, * ,100 *7,200 6, * ,850 *7,300 5, * ,550 *7,850 5, ,350 8,550 5, ,300 9,600 5, * *12,250 7, Stick R2.6 (8'6") Shoes 700 (28") triple grouser with step 1.5 /5 3.0 / / / / *5750 *5750 *12,800 *12,800 *9950 *9950 *22,400 *22,400 *8850 *18,850 *6250 *14,400 * *23,100 * *23,200 *7750 *16,300 *8850 *18,850 *6250 *14, , ,100 *7750 *16,300 *7,500 *4600 *10,000 *5900 *12,650 *7200 *15, , ,950 *7450 *16,000 *7,500 *4600 *10, , , , , ,300 *3500 *6,450 *4300 *9,400 *4800 *10, , , ,350 *3250 * *7,300 *7, *2850 * *6,450 *6,350 *6, * ,200 *6,100 5, * ,900 *6,200 5, * * ,600 *6,600 4, * ,350 *7,450 4, ,250 8,850 5, ,150 6, * *11,900 11, *Indicates that the load is liited by hydraulic liing capacity rather than tipping load. The above loads are in copliance with hydraulic excavator li capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liing capacity or 75% of tipping load. Weight of all liing accessories ust be deducted fro the above liing capacities. Liing capacities are based on the achine standing on a fir, unifor supporting surface. The use of a work tool attachent point to handle/li objects, could affect the achine li perforance. Li capacity stays within ± 5% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product inforation. 22

11 Reach Boo Li Capacities Load Point Height Load at Maxiu Reach Load Radius Over Front Load Radius Over Side Stick R2.9 (9'6") Shoes 700 (28") triple grouser with step 1.5 /5 3.0 / / / / *2950 * *6,500 *6, * *2650 * *7,350 7,350 *5,800 *5, * * *8,850 7,250 *5,650 5, *8000 *8000 * * * * *17,000 *17,000 *11,900 10,600 *10,000 6,900 *6,050 4,850 *5,800 4, *7100 *7100 * * *17,000 *17,000 *14,900 9,850 10,750 6,550 7,700 4,750 *6,250 4, *7050 * * *16,150 *16,150 16,050 9,300 10,450 6,300 *7,050 4, *5700 *5700 * *12,750 *12,750 *22,900 16,600 15,800 9,100 10,300 6,150 8,400 5, *9300 *9300 * *20,850 *20,850 *23, ,900 9,150 10,350 6,250 10,300 6, * * * *18,150 17,450 *12,150 9, *Indicates that the load is liited by hydraulic liing capacity rather than tipping load. The above loads are in copliance with hydraulic excavator li capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liing capacity or 75% of tipping load. Weight of all liing accessories ust be deducted fro the above liing capacities. Liing capacities are based on the achine standing on a fir, unifor supporting surface. The use of a work tool attachent point to handle/li objects, could affect the achine li perforance. Li capacity stays within ± 5% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product inforation. 23

12 316E L Hydraulic Excavator Specifications 316E L Work Tool Offering Guide* Boo Type Reach Boo Stick Size R2.9 (9'6") R2.6 (8'6") R2.25 (7'4") Hydraulic Haer H110Es H110Es H110Es H115Es H115Es H115Es H120Es H120Es H120Es Multi-Processor MP15 CC Jaw *** **** MP15 CR Jaw *** **** MP15 PS Jaw *** **** MP15 S Jaw *** Crusher P315 *** **** Pulverizer P215 ** # Deolition and Sorting Grapple G310B ** G310B G310B G315B *** **** Mobile Scrap and Deolition Shear S325 ## S325 ## S325 ## Copactor (Vibratory Plate) CVP75 CVP75 CVP75 Contractors Grapple G115B G115B G115B Orange Peel Grapple Trash Grapple Thubs Rakes Center-Lock Pin Grabber Coupler Dedicated Quick Coupler These work tools are available for the 316E L. Consult your Cat dealer for proper atch. *Offerings not available in all areas. Matches are dependent on excavator configurations. Consult your Cat dealer to deterine what is offered in your area and for proper work tool atch. **Pin-on or CW coupler. ***Pin-on only. ****Over the front only. #Over the front only with CW coupler. ##Boo Mount. 24

13 Bucket Specifications and Copatibility Width Capacity Weight Fill Reach Boo in 3 yd 3 % R2.9 R2.6 R2.25 With Centerlock Quick Coupler General Duty (GD) % % % % % % Maxiu load pin-on (payload + bucket) ,758 4,000 4,298 The above loads are in copliance with hydraulic excavator standard EN474, they do not exceed 87% of hydraulic liing capacity or 75% of tipping capacity with front linkage fully extended at ground line with Maxiu Material Density: bucket curled / 3 (3,500 /yd 3 ) Capacity based on ISO Bucket weight with General Duty tips. Densities with 3.0 (9'10") thub stick do not consider thub weight / 3 (3,000 /yd 3 ) 1500 / 3 (2,500 /yd 3 ) 1200 / 3 (2,000 /yd 3 ) Caterpillar recoends using appropriate work tools to axiize the value custoers receive fro our products. Use of work tools, including buckets, which are outside of Caterpillar s recoendations or specifications for weight, diensions, flows, pressures, etc. ay result in less-than-optial perforance, including but not liited to reductions in production, stability, reliability, and coponent durability. Iproper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boo and stick. 25

14 316E L Standard Equipent Standard Equipent Standard equipent ay vary. Consult your Cat dealer for details. ENGINE C4.4 ACERT diesel engine Biodiesel capable Meets European Union Stage IIIB and U.S. Tier 4 Interi eission standards 2300 altitude capability Electric priing pup Autoatic engine speed control Econoy and high power odes Two-speed travel Side-by-side cooling syste (tilt-up ATAAC, swing-out A/C condenser) Radial seal air filter Priary filter with water separator and water separator indicator Standard battery, 18 C ( 0.4 F) Screen filter in fuel line Secondary fuel filter HYDRAULIC SYSTEM Quick drains, engine and hydraulic oil (QuickEvac) Regeneration circuit for boo and stick Reverse swing dapening valve Autoatic swing parking brake High-perforance hydraulic return filter Capability of installing HP stackable valve and ediu and QC valve Capability of installing additional auxiliary pup and circuit CAB Pressurized operator station with positive filtration Mirror package Sliding upper door window (le-hand cab door) Glass-breaking safety haer Reovable lower windshield with in cab storage bracket Coat hook Beverage holder Literature holder AM/FM Radio with MP3 auxiliary audio port Two 12V stereo speakers Storage shelf suitable for lunch or tooox Color LCD display with warning, filter/fluid change, and working hour inforation Adjustable arrest Height adjustable joystick consoles Neutral lever (lock out) for all controls Travel control pedals with reovable hand levers Two power outlets, 10 ap (total) Lainated glass front window, 70/30 split (tepered glass for botto front window) Sunscreen Seatbelt (76 [3"]) Windshield wiper, lower with washer Seat, high-back air suspension heated and cooled Cab irror Level sensor FRONT LINKAGE Bucket linkage, with liing eye UNDERCARRIAGE Grease Lubricated Track GLT2, resin seal Towing eye on base frae Swivel guard COUNTERWEIGHT 2.8 t (3.09 t) ELECTRICAL 80 ap alternator Circuit breaker Capability to electrically connect a beacon LIGHTS Halogen boo lights (le and right) Tie delay function for boo light and cab light Exterior lights integrated into storage box SECURITY Cat one key security syste Door locks Cap locks on fuel and hydraulic tanks Lockable external tool/storage box Signaling/warning horn Secondary engine shutoff switch Openable skylight for eergency exit Guardrail and handrail Rearview caera Travel alar 26

15 For ore coplete inforation on Cat products, dealer services, and industry solutions, visit us on the web at AEHQ7062 ( ) (ANZ) 2013 Caterpillar Inc. All rights reserved Materials and specifications are subject to change without notice. Featured achines in photos ay include additional equipent. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate and product identity used herein, are tradearks of Caterpillar and ay not be used without perission.