330D L. Ultra-high Demolition. Cat C9 Engine with ACERT Technology Net Power (ISO 9249) at 1800 rpm 200 kw/270 hp. Maximum Pin Height

Transcription

1 330D L Ultra-high Deolition Cat C9 Engine with ACERT Technology Net Power (ISO 9249) at 1800 rp 200 kw/270 hp Operating Weight (UHD) to kg Maxiu Pin Height 21.3

2 330D L Ultra-high Deolition Heavy-Duty and purpose built for your deolition job. Upper Frae and Counterweight The heavy-duty upper frae handles increased loads and oveents. Additional counterweight provides axiu stability throughout the recoended working range. Undercarriage Different undercarriage options are available to atch your perforance and transportation needs. Boos, Sticks and Work Tools The 330D Ultra-high deolition is equipped with a reliable and safe boo hook syste that significantly reduces the tie needed to change the front parts, providing increased uptie, production and versatility. To further increase the achine s versatility, various front part options are available. Besides the Ultra-high deolition configuration, a short two position retrofit boo nose as well as a long reach excavation front are available. To coplete the configuration, purposely designed Caterpillar work tools are available. Engine The Cat C9 engine with ACERT Technology offers better fuel efficiency and reduced wear. It works at the point of cobustion to optiize engine perforance and provide low exhaust eissions. By cobining ACERT Technology with the new Econoy Mode and Power Manageent, custoers can balance the deands of perforance and fuel econoy to suit their requireents and application. Serviceability Longer service intervals and easier aintenance result in better achine availability and lower owning and operating costs. Operator Station The safe, rooy, quiet, autoatically cliate controlled tiltable cab has excellent sightlines to the work tool to help keep operator fatigue low and production up throughout the entire shift. Coplete Custoer Service Your Cat dealer offers a wide range of services that can be set up under a custoer support agreeent when you purchase your equipent. The dealer will help you choose a plan that can cover everything fro achine and attachent selection to replaceent. Upper Frae and Counterweight Purposely designed and built for extree conditions. Reinforced Upper Frae. The heavy-duty reinforced upper fraes of the Cat UHD odels are designed to withstand the extree load conditions of deolition applications. Copared to a standard upper frae, several additional plates provide the durability and strength required in these environents. Counterweight. A heavier counterweight balances the swing bearing and provides enhanced stability. Standard Heavy-duty Swing Bearing to Upper Frae Bolts. The swing bearing bolts are 20 longer on the back half of upper frae for increased joint retention. Bolt grade is increased fro 10.9 to 11.9 for increased bolt torque of swing bearing to upper frae and carbody. 2

3 Undercarriage Durable undercarriage absorbs stresses and provides excellent stability. Undercarriage Options. Five undercarriage options are available to choose the best achine for the application and business needs. A variety of standard and heavy-duty track shoes are available for various underfoot conditions. Long Undercarriage. The long undercarriage (L) axiizes stability and lift capacity. A long, wide and sturdy undercarriage offers a very stable work platfor. Long Narrow Undercarriage. The long and narrow undercarriage (LN) provides the best choice when ease of transport is iportant while aintaining excellent perforance. Hydraulic Variable Gauge Undercarriage. The hydraulic variable gauge undercarriage (HVG) increases the stability through increased track gauge in working position as well as by lowering the center of gravity of the achine. The non-bolt joint allows a change fro shipping to working width, or reverse, in less than a inute. The hydraulic variable gauge undercarriage provides a shipping width of 3000 and a working width of 3420 (with 600 shoes). Heavy Duty High Wide Undercarriage. The heavy-duty high wide undercarriage (HDHW) provides an increased overthe-side stability as well as increased ground clearance. Thicker carbody plates, plus larger box-section height tea up to provide superior joint retention and durability in deolition applications. ES Extree Service Undercarriage (345C L). The 330D Ultra-high deolition can also be equipped with an upsized undercarriage. The 345C variable gauge heavy-duty, H-shaped long undercarriage provides ease of transport and a stable platfor when working on a variety of sites. Another benefit of the 345C undercarriage is the increased ground clearance. With 600 track shoes, the track roller fraes can be retracted to a transport width of less than three eters. Tracks. The 330D coes standard with grease lubricated tracks. The track links are assebled and sealed with grease to decrease internal bushing wear, reduce travel noise and extend service life lowering operating costs. 3

4 Boos and Sticks and Work Tools Maxiu versatility gets the best out of your achine. Boo Hook Syste. The front parts are equipped with a reliable and safe hook syste between the boo foot and boo nose. Copared to the traditional pin-ounted joint, the hook syste significantly reduces the tie needed to change between the Ultra-high front parts and the short retrofit configuration, or the long-reach excavation configuration. In principle, the boo hook syste consists of a hook syste to pick up the front parts and a echanical expander pin to secure these front parts onto the boo foot. The absence of any hydraulic parts, as well as a full length heavy duty one-piece securing pin, ensure a safe and reliable operation. The operator has an excellent view of the hook syste fro the cab to ease changing the front parts. Retrofit Capability. A short boo nose can be hooked onto the boo foot. To axiize the achine s extree versatility, this boo nose can be put in two positions. The straight position is ideal for working in above ground level applications, such as low level deolition or sorting, and the bent position can be used for applications such as digging or truck loading. For long-reach digging and extracting applications, a two-piece long reach excavation front is available. This long reach front is also equipped with the boo-hook syste as well as the hydraulic quick disconnects, ensuring a fast change of front parts. Optional ediu pressure lines enable the use of tilting buckets. Hydraulic Quick Disconnects. The hydraulic lines between boo foot and boo nose are fitted with hydraulic quick disconnects to even further reduce the tie needed to change the front parts. Oil spillage and containation is reduced through the quick disconnects flat-face design. New generation face-to-face ball valves are installed on auxiliary high pressure lines for an unatched reliability. Dedicated Ultra-High Deolition Linkage. Because Ultra-high deolition applications require a different working envelop than standard applications, a purpose designed linkage is standard on the Ultrahigh deolition front parts. Besides providing an optiized working envelop, this linkage also greatly iproves controllability in nearly every position. Tool Cylinder Protection. To prevent daage to the tool cylinder rod caused by falling concrete and debris, the tool cylinder is equipped with a heavy duty etal cover. Thanks to its unique construction, the cover protects the cylinder rod in every position. Lowering Control Devices. For increased safety and controllability lowering control devices are installed on boo, stick and tool cylinders. SartBoo is standard on the 330D L UHD. Multi-Processors. The Caterpillar Multi-Processors can be equipped with different jaw types depending on your need. CC-jaws cobi cutter. CR-jaws concrete crusher. PP-jaws priary pulveriser. PS-jaws secondary pulveriser. TS-jaws tank shear. S-jaws steel. Deolition and Sorting Grapples. The deolition and sorting grapple with unliited left and right rotation is the ideal tool for stripping, sorting, handling and loading. Deolition Shears. These shears can grab and pick aterial fro a pile easily, without requiring oveent of the base carrier. They are very efficient tools because of the high force to weight ratio. The blades are ade of exceptionally long-wear alloy steel and have proven speed valves that iprove cycle ties. 4

5 Operator Station Designed for cofort, safety and ease of operation. Hydraulically Tiltable Cab. The hydraulically tiltable cab tilts back fro 0 to 30 degrees to further iprove upward visibility and allows the operator to adopt a ore cofortable body position. The tiltable cab is integrated into the upper frae and therefore does not increase the achine s shipping height. Because of the integration into the upper frae, no tilt parts are exposed to the deolition environent. To reduce vibrations and sound the cab shell is attached to the frae with viscous ounts. Cliate Control. Positive filtered ventilation with a pressurized cab is standard. Fresh air or re-circulated air can be selected with a switch on the right console. Controls. The 330D uses pilot operated control levers, positioned so the operator can operate with ars on the arrests. The vertical stroke is longer than the horizontal, reducing operator fatigue. The control lever grips are shaped to fit into the operator s hands. The horn switch and one-touch low idle switch are positioned on the left and right grip. Ipleent Controls. Easy to handle joysticks with integrated push buttons and sliding switches control all ipleent and swing functions. The sliding switches provide odulated control for hydroechanical tools and are designed to increase operator cofort and reduce operator fatigue. High Visibility Cab. The lainated safety glass front window is one-piece with a botto ounted parallel wiper for excellent visibility. For enhanced upward visibility the increased ipact resistant top window extends copletely to the rear and has a wiper and washer. The upper left side door window can slide open. The lower window provides visibility to the tracks and to the ground next to the achine. The rear window offers a good view behind and to the left, aided by a lower hood profile. Falling Object Guard. An ISO certified falling object guard on top and front of the cab is standard. The crossbars of the top guard are angled in line with the operator s sight for enhanced visibility of the work tool. The front guard swings out for easier windshield cleaning. 5

6 Engine Sound Hydraulic Syste Cat C9 with ACERT Technology Net Power at 1800 rp ISO kw/270 hp 80/1269/EEC 200 kw/270 hp Bore 112 Stroke 149 Displaceent 8.8 liters All engine horsepower (hp) are etric including front page. The C9 engine eets Stage IIIA eission requireents. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, uffler, and alternator. Full engine net power up to 2300 altitude (engine derating required above 2300 ). Cab/FOGS Cab/FOGS eets ISO Operator Sound The operator sound level easured according to the procedures specified in ISO 6394:1998 is 78 db(a), for cab offered by Caterpillar. Exterior Sound The labeled spectator sound power level easured according to the test procedures and conditions specified in 2005/88/EC is 105 db(a). Drive Maxiu Travel Speed Maxiu Drawbar Pull Swing Mechanis Swing Speed Swing Torque 5.0 k/h 300 kn 10 rp 109 kn Main Syste Maxiu flow Maxiu pressure Noral Heavy lift Travel Swing Pilot Syste Maxiu flow Maxiu pressure 2 x 280 l/in 350 bar 360 bar 350 bar 280 bar 43 l/in 39 bar Service Refill Capacities Liters Fuel Tank 620 Cooling Syste 40 Engine Oil 40 Swing Drive (each) 19 Final Drive (each) 8 Hydraulic syste (including tank) 410 Hydraulic tank 310 Work Tools Matching Guide Without quick coupler Multi-Processors Crushers 360 rotatable Shears Grapples With quick coupler Quick Coupler Multi-Processors Crushers 360 rotatable Shears Grapples MP15 CC, CR, PP, S MP20 CC, CR, S MP20 PP MP20 TS VHC-30 VHC-40 S320 G320 G320B-D CW-40 CW-45 CW-40S CW-45S MP15 CC, CR, PP, S MP20 CC, CR, PP, TS MP20 S VHC-30 VHC-40 S320 G320 G320B-D L LN HVG HDHW ES 700 shoes 600 shoes 700 shoes 700 shoes 600 shoes 360 Working Range Over the front only Recoended Available

7 Diensions and Weights UHD Configuration With ultra-high deolition front. All diensions and weights are approxiate. A B C F G E D H L LN HVG HDHW ES A Shipping length B Boo height C Cab height* (with FOGS) D Transport width with 600 shoes with 700 shoes E Track gauge Fully retracted (if applicable) Fully extended (if applicable) F Length to center of roller G Track length H Ground clearance Weight** kg * The hydraulically tiltable cab does not increase the shipping height. ** With ultra-high deolition front parts, undercarriage, tiltable cab, FOG and full fuel tank. Diensions and Weights Base Machine Ultra-high deolition front parts, retrofit configurations, counterweight. All diensions and weights are approxiate. L 330D with Long undercarriage LN 330D with Long Narrow undercarriage HVG 330D with Hydraulic Variable Gauge undercarriage HDHW 330D with Heavy Duty High Wide undercarriage ES 330D with 345C L undercarriage A C L LN HVG HDHW ES A Length C Height (with FOGS) D Track shoe width E Narrow gauge Working gauge Weight kg D E 330D L Ultra-high Deolition specifications 7

8 Diensions and Weights Retrofit Configurations With retrofit boo nose in straight and bent position. All diensions and weights are approxiate. Stick length Bucket capacity Shipping height (with L undercarriage) Straight position Bent position Shipping length* Straight position Bent position Operating weight with retrofit boo nose L undercarriage kg LN undercarriage kg HVG undercarriage kg HDHW undercarriage kg ES undercarriage kg Ground pressure L undercarriage (700 shoes) bar LN undercarriage (600 shoes) bar HVG undercarriage (600 shoes) bar HDHW undercarriage (600 shoes) bar ES undercarriage (700 shoes) bar * With stick cylinder extended. Retracting the stick cylinder ight decrease the shipping height but will increase shipping length. L 330D with Long undercarriage LN 330D with Long Narrow undercarriage HVG 330D with Hydraulic Variable Gauge undercarriage HDHW 330D with Heavy Duty High Wide undercarriage ES 330D with 345C L undercarriage 8 330D L Ultra-high Deolition specifications

9 Working Ranges Front With Ultra-high deolition front C B A D A Maxiu allowable angle fro vertical 25 B Maxiu allowable horizontal reach C Maxiu vertical pin height L, LN HVG HDHW ES D Miniu pin height L, LN 3820 HVG 3875 HDHW 4055 ES 4025 Maxiu tool weight* L undercarriage Over front 3000 kg Over side 1800 kg LN undercarriage Over front 3000 kg Over side not authorized HVG undercarriage Over front 3000 kg Over side 2700 kg HDHW undercarriage Over front 3000 kg Over side 2450 kg ES undercarriage Over front 3000 kg Over side 2700 kg * Weight includes ounting bracket and quick coupler (if any). Design of the ounting bracket and quick coupler is critical. Distance between stick nose and center of gravity cannot exceed L 330D with Long undercarriage LN 330D with Long Narrow undercarriage HVG 330D with Hydraulic Variable Gauge undercarriage HDHW 330D with Heavy Duty High Wide undercarriage ES 330D with 345C L undercarriage 330D L Ultra-high Deolition specifications 9

10 Working Ranges Retrofit Configurations 330D L with retrofit boo in straight and bent position C A B D G E F Stick Length A Maxiu Digging Depth B Maxiu Reach at Ground Level C Maxiu Cutting Height D Maxiu Loading Height E Miniu Loading Height F Maxiu Digging Depth 2.5 Level Botto G Maxiu Vertical Wall Digging Depth Bucket Digging Force (ISO 6015) Stick Digging Force (ISO 6015) Bucket Size Tip Radius kn kn C A B D G E F Stick Length A Maxiu Digging Depth B Maxiu Reach at Ground Level C Maxiu Cutting Height D Maxiu Loading Height E Miniu Loading Height F Maxiu Digging Depth 2.5 Level Botto G Maxiu Vertical Wall Digging Depth Bucket Digging Force (ISO 6015) Stick Digging Force (ISO 6015) Bucket Size Tip Radius kn kn D L Ultra-high Deolition specifications

11 Working Ranges 330D HVG Long Reach Excavation Hydraulic Variable Gauge (HVG) undercarriage with retrofit boo and 7100 long reach stick C Stick Length A Maxiu Digging Depth B Maxiu Reach at Ground Level C Maxiu Cutting Height Bucket Digging Force Stick Digging Force Tip Radius kn kn B A C Stick Length A Maxiu Digging Depth B Maxiu Reach at Ground Level C Maxiu Cutting Height Bucket Digging Force (ISO 6015) Stick Digging Force (ISO 6015) Tip Radius kn kn B A D L Ultra-high Deolition specifications 11

12 Lift Capacities 330D L Long (L) undercarriage with retrofit boo in straight and bent position. All weights are in kg. Heavy lift on. Short Stick kg Short Stick kg Mediu Short Stick Mediu Short Stick *9260 *9260 *7260 * * * *14420 *14420 * * * * * * * * * * * * * * * *6420 * * *10040 *10040 * * *15230 *15230 * * * * * * * * *12200 *12200 * * * * * * *5510 * *8500 *8500 *5410 * *10230 *10230 * * *10820 *10820 * * * *14100 *14100 * * * * * * * * * * * * *10390 *10390 * * * * * * *4690 * * *4450 * * * *14520 *14520 * * * * * * * * * * * * * * *10420 *10420 * * * *17810 *17810 * * * * * * Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities D L Ultra-high Deolition specifications

13 Mediu Stick Mediu Stick Long Stick *5150 * *8650 *8650 *4180 * *9040 *9040 * *3760 * *9300 *9300 * * * *11290 *11290 * * * * * * * * * * * *7110 *7110 * * *11680 *11680 * * * * * * *3660 * * *3490 * * * *3470 * *10490 *10490 * * * * * * * * * * * * * * *11150 *11150 * * * *17130 *17130 * * * *18890 *18890 * * * *5810 *5810 *3870 * *6310 *6310 *3210 * *7110 *7110 * *2880 * *6790 *6790 *7330 *7330 * *2700 * *7780 *7780 * * * * * * * * * * * * * *7990 *7990 * * *10890 *10890 * * * * * * * * * Long Stick *2780 * *4450 *4450 *2640 * * *2610 * * * *2660 * *15160 *15160 * * * * * * * * * * *6430 *6430 * * * * *10010 *10010 * * * *14510 *14510 * * * *19150 *19150 * * * * *12250 *12250 * D L Ultra-high Deolition specifications 13

14 Lift Capacities 330D LN Long Narrow (LN) undercarriage with retrofit boo in straight and bent position. All weights are in kg. Heavy lift on. Short Stick kg Short Stick kg Mediu Short Stick Mediu Short Stick *9260 *9260 *7260 * * * *14420 *14420 * * * * * * * * * * * * * * * *6420 * * * * * * * * * * * * * *12200 *12200 * * * * * * *5510 * *8500 *8500 *5410 * * * * * * * * *14100 *14100 * * * * * * * * * * * *10390 *10390 * * * * * * *4690 * * *4450 * * * *14520 *14520 * * * * * * * * * * * * * * *10420 *10420 * * * *17810 *17810 * * * * * * Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities D LN Ultra-high Deolition specifications

15 Mediu Stick Mediu Stick Long Stick *5150 * *8650 *8650 *4180 * *9040 *9040 * *3760 * *9300 *9300 * * * *11290 *11290 * * * * * * * * * * * *7110 *7110 * * * * * * * * *3660 * * *3490 * * * * * * * * * * * * * * * * * * * *11150 *11150 * * *17130 *17130 * * * *18890 *18890 * * * *5810 *5810 *3870 * *6310 *6310 *3210 * * * *2880 * *6790 *6790 * * * *7780 *7780 * * * * * * * * * * * * * *7990 *7990 * * * * * * * * * * * * Long Stick *2780 * *4450 *4450 *2640 * * *2610 * * * * * * * * * * * * * * * *6430 *6430 * * * * *10010 *10010 * * * *14510 *14510 * * * *19150 *19150 * * * * * * D LN Ultra-high Deolition specifications 15

16 Lift Capacities 330D HVG Hydraulic Variable Gauge (HVG) undercarriage with retrofit boo in straight and bent position. All weights are in kg. Heavy lift on. Short Stick kg Short Stick kg Mediu Short Stick Mediu Short Stick *9290 *9290 *7220 * *10790 *10790 * *14530 *14530 *12020 *12020 * * *17030 *17030 * * * * * * * * * * * * * * * * * * * * *6400 * *6170 * *10080 *10080 * * *15330 *15330 *11290 *11290 * * * * * * * * * * * * *12600 *12600 * * * * *14510 *14510 * *8150 * *5580 * *8510 *8510 *5380 * *10340 *10340 * *4820 * *10850 *10850 * * *4540 * *14570 *14570 * * * * * * * * * * * * * * * * * * * *10630 *10630 * * * *8660 *8660 * *4700 * *4670 * *8230 *8230 *4440 * *8530 *8530 *4390 * *14630 *14630 *11080 *11080 * * *4480 * *17690 *17690 * * * * *14520 *14520 * * * * * * * * *10670 *10670 * * * * * *17820 *17820 * * * *5780 * *13290 *13290 *10180 *10180 Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities D HVG Ultra-high Deolition specifications

17 Mediu Stick Mediu Stick Long Stick *8380 *8380 *5090 * *8680 *8680 *4160 * *9040 *9040 *8540 *8540 *3750 * *9330 *9330 * * *3550 * *11550 *11550 *11470 *11470 * * *3470 * *18160 *18160 * * * * * * * * * * * * *7240 *7240 * * * * * *11870 *11870 * * * *3680 * *9440 *9440 * * *3650 * *7740 *7740 *3490 * *8110 *8110 *6040 *6040 *3470 * *10540 *10540 * * *3570 * *16860 *16860 * * * *3770 * * * * * * *5850 *5850 * * * * *11350 *11350 * * * * * *17360 *17360 * * * * *14360 *14360 * *6120 *6120 total 7.69 *6400 *6400 *3840 * *7110 *7110 *5710 *5710 *3190 * *6810 *6810 *7350 *7350 * *2870 * *7850 *7850 *8230 *8230 * * *2700 * *16920 *16920 * * * *2620 * * * * *2610 * * * *2670 * *8060 *8060 * * *2800 * *11020 *11020 * * * * * *12810 *12810 * * * *3790 *3790 * *7760 *7760 *6100 *6100 Long Stick *2780 * *4560 *4560 *2640 * *7340 *7340 * *2610 * *8110 *8110 * *2670 * *15270 *15270 *11190 *11190 * * * *2810 * * * * * * *3040 * *6540 *6540 * * * * * *3400 * *10150 *10150 * * * * *14690 *14690 * * * * * *19200 *19200 * * * *4910 * *12080 *12080 *8930 * D HVG Ultra-high Deolition specifications 17

18 Lift Capacities 330D HDHW Heavy Duty High Wide (HDHW) undercarriage with retrofit boo in straight and bent position. All weights are in kg. Heavy lift on. Short Stick kg Short Stick kg Mediu Short Stick Mediu Short Stick *9460 *9460 *7100 * *12970 *12970 *11230 *11230 * *14990 *14990 *12080 *12080 * * *17260 *17260 * * * * * * * * * * * * * * *6350 * *6160 * *10200 *10200 * * *15700 *15690 *11450 *11450 * * * * * * * *13910 *13910 * * * * *14170 *14170 * *5820 * *8600 *8600 *5290 * *10640 *10640 * *4770 * *9850 *9850 *10980 *10980 * * *16610 *16610 * * * * * * * * * * * * *11470 *11470 * * * *8300 *8290 *6720 * *4630 * *8240 *8240 *4430 * *8600 *8600 *4400 * *15010 *15010 *11260 *11260 * * * * * * * *14340 *14340 * * * * * * *11520 *11520 * * * *17840 *17840 * * * *5540 * *12790 *12790 *9740 *9740 Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities D HDHW Ultra-high Deolition specifications

19 Mediu Stick Mediu Stick Long Stick *4920 * *8820 *8820 *4090 * *9030 *9030 *8690 *8690 *3720 * *9450 *9450 * * *3530 * *12640 *12640 *11990 *11990 * * *3470 * * * * * * * * * * *7700 *7700 * * *12540 *12540 * * * *3550 * *9100 *9100 * * *3620 * *7760 *7760 *3480 * *8180 *8180 * *3480 * *22260 *22260 *14070 *14070 *10730 *10730 * * *3590 * *17200 *17200 * * * *3800 * * * * * *6540 *6540 * * * *12010 *12010 * * * *17950 *17950 * * * * *13920 *13920 * *6790 *6790 *3730 * *6620 *6620 *3140 * *7130 *7130 *6000 *6000 *2840 * *6850 *6850 *7410 *7410 * *2680 * *7250 *7250 *8120 *8120 *8410 *8410 * * *2610 * *17200 *17200 * * * *2620 * * * *2690 * * * *8300 *8300 * * *11490 *11490 * * * * *12400 *12400 * * * Long Stick *2750 * *4920 *4920 *2630 * *7420 *7420 * *2610 * *8220 *8220 * *2680 * *15650 *15650 *11390 *11390 * * * *2830 * * * * * *3080 * *6920 *6920 * * * * *10640 *10640 * * * *15310 *15310 * * * *19390 *19390 * * * *8380 * D HDHW Ultra-high Deolition specifications 19

20 Lift Capacities 330D ES Retrofit boo in straight and bent position with 345C L undercarriage. All weights are in kg. Heavy lift on. Short Stick kg Short Stick kg Mediu Short Stick Mediu Short Stick *9430 *9430 *7120 * *12860 *12860 *11160 *11160 * *14920 *14920 *12070 *12070 * * *17230 *17230 * * * * * * * * * * * * * * * * * * * * *9340 *9340 * * *6360 * *6160 * *10180 *10180 * * *15640 *15640 *11430 *11430 * * * * * * * * * * * * * * *13710 *13710 * * * * *14220 *14220 * *5790 * *8580 *8580 *5310 * *10650 *10650 * *4780 * *9830 *9820 *10960 *10960 * * *4520 * *16250 *16250 *12730 *12730 * * * * * * * * * * * * * * * * * * * * * *11340 *11340 * * * *8350 *8350 *6760 * *4640 * *8240 *8240 *4430 * *8580 *8580 *4400 * *14950 *14950 *11230 *11230 * * *4490 * *17940 *17940 * * * * *14360 *14360 * * * * * * * * * *11390 *11390 * * * * *17840 *17840 *16230 *16230 * * *5580 * *12870 *12870 *9810 *9810 Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities D ES Ultra-high Deolition specifications

21 Mediu Stick Mediu Stick Long Stick *8650 *8650 *4940 * *8800 *8800 *4100 * *9030 *9030 *8670 *8670 *3720 * *9430 *9430 * * *3530 * *12460 *12450 *11910 *11910 * * *3470 * *18370 *18370 * * * * * * * * * * * * * * * *7630 *7630 * * * * * *12430 *12430 * * * *3570 * *9150 *9150 * *5240 * *3620 * *7760 *7760 *3480 * *8170 *8170 *6400 *6400 *3480 * *22090 *22090 *14010 *14010 *10700 *10700 * * *3590 * *17150 *17150 * * * *3800 * * * * * * *6430 *6430 * * * * * *11910 *11910 * * * * * *17940 *17940 * * * *5550 * *13990 *13990 * *6720 *6720 *3750 * *6590 *6590 *3150 * *7130 *7130 *5960 *5960 *2850 * *6840 *6840 *7400 *7400 * *2680 * *7190 *7190 *8070 *8070 *8380 *8380 * * *2610 * *17160 *17160 * * * * *2620 * * * * * *2680 * * * * * *2820 * *8260 *8260 * * * * *3040 * *11420 *11420 * * * * * *12460 *12460 * * * *5800 *5800 Long Stick *2750 * *4870 *4870 *2630 * *7410 *7410 * *2610 * *8200 *8200 * *2680 * *15600 *15600 *11360 *11360 * * * *2830 * * * * * * *3070 * *6860 *6860 * * * * *3440 * *10560 *10560 * * * * * *15210 *15210 * * * * * *19360 *19360 *15600 *15600 * * *8470 * D ES Ultra-high Deolition specifications 21

22 Lift Capacities 330D HVG Long Reach Excavation Hydraulic Variable Gauge (HVG) undercarriage with retrofit boo and long reach stick. All weights are in kg. Heavy lift on. Long Reach Excavation Stick kg *2710 *2710 *1550 * *3320 *3320 *2320 *2320 *1510 * *3770 *3770 *3060 *3060 *1500 * *4500 *4500 *4230 *4230 * *2320 *2320 *1510 * *5400 *5400 *5070 *5070 * * * *1550 * *7390 *7390 *6180 *6180 * * * * *1610 * *4930 *4930 *14360 *14360 *10280 *10280 *8020 *8020 * * * * * * *2420 *2420 *8800 *8800 * * * * * * * *3120 *3120 *6780 *6780 * * * * * * *4240 *4240 *6940 *6940 * * * * * *5480 *5480 *7810 *7810 * * * * *6820 *6820 *9070 *9070 * * * * * *8280 *8280 *10620 *10620 * * * * * * * *9450 *9450 * * * * * * *6050 *6050 *5140 *5140 * * Long Reach Excavation Stick kg *2090 *2090 *1500 * *2850 *2850 *1520 * *3330 *3330 *1570 * *3770 *3770 * *2300 *2300 *1650 * *5200 *5200 *4530 *4530 * * * *1760 * *5240 *5240 *13260 *13260 *9210 *9210 *7080 *7080 *5790 *5790 * * * * * *3050 *3050 *4900 *4900 *10240 *10240 * * * * * * * * *4270 *4270 *5730 *5730 *9430 *9430 * * * * * * * * *5510 *5510 *6870 *6870 *9960 *9960 * * * * * * *6770 *6770 *8180 *8180 *11070 *11070 * * * * * *8080 *8080 *9630 *9630 * * * * * *9470 *9470 *11230 *11230 * * * * * * * *13000 *13000 *12610 *12610 * * * * *10400 *10400 *8120 *8120 * Load Point Height Load Radius Over Front Load Radius Over Side Load at Maxiu Reach * Liited by hydraulic rather than tipping load. The above loads are in copliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories ust be deducted fro the above lifting capacities D L Ultra-high Deolition specifications

23 Standard Equipent Standard equipent ay vary. Consult your Caterpillar dealer for specifics. Electrical Alternator, 80 A Lights working Boo, both side Cab interior Cab ounted, two Frae ounted Signal/warning horn Engine/Power Train Autoatic engine speed control Autoatic swing parking brake Autoatic travel parking brakes Caterpillar C9 with ACERT Technology Altitude capability to 2300 without derating Fine swing control Fuel Filter Secondary engine shut-off switch Side-by-side cooling syste with separately ounted AC condenser Two speed travel Water separator, with level indicator, for fuel line Guards Full length track guiding guards Heavy duty botto guards on upper frae Heavy duty swivel guard on undercarriage 6 swivel guard on undercarriage Front Linkage Boo foot with hook syste Face-to-face ball valve syste Hydraulic quick disconnects Operator Station Adjustable arrest Air conditioner, heater and defroster with autoatic cliate control Ashtray and lighter, 24 V Beverage/cup holder Coat hook Electrical provision for seat heater EU sound criteria package Floor at, washable FOGS Instruent panel and gauges with full color graphical display, start-up level checks High resistant front windshield Large skylight with wiper and washer Literature copartent Mirrors left and right Neutral lever (lock out) for all controls Positive filtered ventilation, pressurized cab Rear window, eergency exit Retractable seat belt 51 width Sliding upper door window Storage copartent suitable for a lunch box Sunshade for windshield and skylight Tilting device (cab) Travel control pedals with reovable hand levers Waring device Windshield wipers and washers (upper and lower) Track Grease lubricated track Hydraulic track adjusters Undercarriage L Long LN Long Narrow HVG Hydraulic Variable Gauge HDHW Heavy Duty High Wide ES 345C L undercarriage Other Standard Equipent Auxiliary hydraulic valve for hydroechanical tools Boo lowering control device with SartBoo Cat batteries Cat branded XT hoses and reusable couplings Cat Datalink and capability to use ET Caterpillar one key security syste with locks for doors, cab and fuel cap Cobined control Cross-roller type swing bearing Counterweight kg with lifting hook Drive for auxiliary pup Heavy lift ode Mediu pressure control Radio, 24V Regeneration circuit for boo and stick S O S SM quick sapling valves for engine oil and hydraulic oil Steel firewall between engine and hydraulic pups Thub wheel joysticks Wiring provisions for Product Link Optional Equipent Optional equipent ay vary. Consult your Caterpillar dealer for specifics. Front Linkage Bucket linkages Sticks Retrofit boo (short, LRE) UHD front boo Auxiliary Controls and Lines Auxiliary stick lines Miscellaneous Options Bio hydraulic oil package Converter, 7 ap-12v Electric refueling pup with auto shut-off Fine filtration filter Jup start terinals Starting aid for cold weather with ether Travel alar with cut off switch Operator Copartent Lunch box storage with lid Machine security syste with prograable keys Seat Adjustable high-back seat with echanical suspension Adjustable high-back seat with air suspension Adjustable high-back heated seat with air suspension Straight travel pedal 23