320 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism.

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "320 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism."

Transcription

1 320 GC Hydraulic Excavator Technical Specifications Engine Engine Model Cat C4.4 ACERT Net Power (ISO 9249) 107 kw 143 hp Net Power (SAE J1349) 107 kw 143 hp Gross Power (ISO 14396/SAE J199) 108 kw 14 hp Bore 10 mm 4 in Stroke 127 mm in Displacement 4.4 L 269 in3 The 320 GC meets China Nonroad Stage III emission standards. Recommended for use up to 400 m (14,764 ft) altitude with engine power derate above 3000 m (9,842. ft). Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. Rating at 2,000 rpm. Engine rpm Operation Travel Swing Mechanism 1,60 rpm 2,000 rpm Swing Speed 11.3 rpm Maximum Swing Torque 74 kn m 4,400 lbf-ft Weights Operating Weight kg 4,200 lb Reach boom, R2.9 (9'6") stick, GD 1.0 m3 (1.31 yd3) bucket and 600 mm (24") triple grouser shoes, 3.7 mt (8,200 lb) counterweight. Track Standard Track Shoes Width 600 mm 24 in Number of Shoes (each side) 4 Number of Track Rollers (each side) 8 Number of Carrier Rollers (each side) 2 Drive Maximum Gradeability 3 /70% Maximum Travel Speed.7 km/h 3. mph Maximum Drawbar Pull 206 kn 46,311 lbf Hydraulic System Main System Maximum Flow (Implement) 429 L/min (21 2 pumps) 113 gal/min (7 2 pumps) Swing System Maximum Flow No swing pump Maximum Pressure Equipment kpa,07 psi Normal Maximum Pressure Equipment kpa,10 psi Lift Mode Maximum Pressure Travel kpa 4,974 psi Maximum Pressure Swing kpa 3,886 psi Boom Cylinder Bore 120 mm in Boom Cylinder Stroke 1260 mm 0 in Stick Cylinder Bore 13 mm in Stick Cylinder Stroke 104 mm 9 in Bucket Cylinder Bore 11 mm in Bucket Cylinder Stroke 1104 mm 43 in

2 Service Refill Capacities Fuel Tank Capacity 34 L 86.6 gal Cooling System 2 L 6.6 gal Engine Oil 1 L 4.0 gal Swing Drive (each) L 1.3 gal Final Drive (each) L 1.3 gal Hydraulic System (including tank) 234 L 61.8 gal Hydraulic Tank 11 L 30.4 gal Standards Brakes ISO 1026:2008 Cab/FOGS ISO 10262:1998 Cab/ROPS ISO :2008 Sound Performance ISO 639:2008 (external) 99 db(a) ISO 6396:2008 (inside cab) 70 db(a) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment. Operating Weight and Ground Pressure 600 mm (24") Triple Grouser Shoes Weight Ground Pressure 3.7 mt (8,200 lb) Counterweight Base Machine Reach Boom + R2.9 (9'6") Stick m3 (1.31 yd3) GD Bucket kg 44,800 lb 46.8 kpa 6.8 psi All operating weights include a 90% fuel tank with 7 kg (16 lb) operator. 2

3 Major Component Weights Base Machine (with 3.7 mt [8,200 lb] counterweight, standard swing frame, standard base frame with standard track rollers and standard carrier rollers for standard undercarriage, with boom cylinder does not include 90% fuel and 7 kg [16 lb] operator) Track Shoes: kg lb , mm (24") Width, 8. mm (0.33") Thick Triple Grouser Track Shoes for Standard Undercarriage 280,700 Two Boom Cylinders Weight of 90% Fuel Tank and 7 kg (16 lb) Operator Counterweight: 3.7 mt (8,200 lb) Counterweight ,200 Swing Frame: Standard Swing Frame, for C4.4 ACERT ,10 Standard Undercarriage without Track Shoes: Standard Base Frame with Standard Track Rollers and Standard Carrier Rollers ,900 for Standard Undercarriage Booms (including lines, pins, stick cylinder): Reach Boom (.7 m/18'8") ,700 Sticks (including lines, pins, bucket cylinder, bucket linkage): Reach Stick (R2.9B1/9'6") 980 2,200 Buckets (without linkage): 1.0 m3 (1.31 yd3) GD 760 1,670 3

4 Dimensions All dimensions are approximate and may vary depending on bucket selection , Boom Option Stick Option 1 Machine Height: Reach Boom.7 m (18'8") Reach Stick R2.9B1 (9'6") Top of Cab Height 2960 mm 9'9" Top of FOGS Height 3100 mm 10'2" Handrails Height 290 mm 9'8" With Boom/Stick/Bucket Installed 3160 mm 10'4" With Boom/Stick Installed 2910 mm 9'7" With Boom Installed 2480 mm 8'2" 2 Machine Length: With Boom/Stick/Bucket Installed 930 mm 31'3" With Boom/Stick Installed 900 mm 31'2" With Boom Installed 840 mm 27'9" 3 Upperframe Width without Walkways 2780 mm 9'1" 4 Tail Swing Radius 2830 mm 9'3" Counterweight Clearance 100 mm 3'" 6 Ground Clearance 470 mm 1'7" 7 Track Length Length to Center of Rollers 3270 mm 10'9" 8 Track Gauge Extended 2200 mm 7'3" 9 Track Width: 600 mm (24") Shoes 2980 mm 9'9" 10 Undercarriage Width (with steps/without steps): 600 mm (24") Shoes 2980 mm 9'9" Bucket Type GD Bucket Capacity 1.0 m yd3 Bucket Tip Radius 180 mm '2" 4

5 Working Ranges All dimensions are approximate and may vary depending on bucket selection. Feet Meters R2.9B1 (9'6") Meters Feet Boom Option Stick Option Reach Boom.7 m (18'8") Reach Stick R2.9B1 (9'6") 1 Maximum Digging Depth 6720 mm 22'1" 2 Maximum Reach at Ground Line 9860 mm 32'4" 3 Maximum Cutting Height 940 mm 31'0" 4 Maximum Loading Height 6490 mm 21'4" Minimum Loading Height 2170 mm 7'1" 6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom 60 mm 21'6" 7 Maximum Vertical Wall Digging Depth 690 mm 18'8" Bucket Digging Force (SAE) 11 kn 2,79 lbf Bucket Digging Force (ISO) 129 kn 28,93 lbf Stick Digging Force (SAE) 96 kn 21,678 lbf Stick Digging Force (ISO) 99 kn 22,281 lbf Bucket Type GD Bucket Capacity 1.0 m yd3 Bucket Tip Radius 170 mm '2"

6 Reach Boom Lift Capacities Counterweight: 3.7 mt (8,200 lb) without Bucket 2.9 m (9'6").7 m (18'8") 600 mm (24") Triple Grouser Shoes 3270 mm (10'9") R2.9B mm (7'3") 4070 mm (13'4") 100 mm/60 in 3000 mm/120 in 400 mm/180 in 6000 mm/240 in 700 mm/300 in 700 mm kg *430 *430 *370 * in lb *8,30 *8, mm kg * * in lb *10,80 9,700 *7,700 7, mm kg * * in lb *11,80 9,30 9,600 6,0 *7,0 6, mm kg * * in lb *17,100 13,00 13,20 8,900 9,400 6,30 *7,700, mm kg in lb 19,60 12,40 12,700 8,400 9,10 6,100 7,900, mm kg *800 * in lb *13,300 *13,300 18,90 11,900 12,300 8,00 9,000,90 8,00, mm kg *6200 *6200 * * in lb *13,800 *13,800 *22,700 22,000 18,70 11,700 12,10 7,900 8,90,900 8,700, mm kg * * * in lb *23,800 *23,800 *30,00 22,400 18,900 11,80 12,20 8,000 10,30 6, mm kg * * * in lb *24,00 23,10 *17,200 12,300 *13,40 9, mm in ISO 1067 * Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 1067:2007. They do not exceed 87% of hydraulic lifting capacity or 7% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Lift capacity stays with ±% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product information. 6

7 Bucket Specifications and Compatibility Width Capacity Weight Fill 3.7 mt (8,200 lb) Counterweight Reach Boom Linkage mm in m 3 yd 3 kg lb % R2.9 (9'6") Pin-On (No Quick Coupler) Utility Duty (UD) (No Adjuster) B , B , General Duty Excavation (GDX) B , B , B , X Heavy Duty (HD) B , B , B , X Severe Duty (SD) B , B ,3 90 Extreme Duty (XD) B , B , Maximum load with pin-on (payload + bucket) kg 242 lb, mt (8,200 lb) Counterweight Width Capacity Weight Fill Reach Boom Linkage mm in m 3 yd 3 kg lb % R2.9 (9'6") With Cat Pin Grabber Coupler Utility Duty (UD) B , B , General Duty Excavation (GDX) B , B , B , Heavy Duty (HD) B , B , B , X Severe Duty (SD) B , B ,3 90 Extreme Duty (XD) B , B , Maximum load with coupler (payload + bucket) kg 2003 lb 4,417 The above loads are in compliance with hydraulic excavator standard EN474-: A3:2013, they do not exceed 87% of hydraulic lifting capacity or 7% of tipping capacity with front linkage fully extended at ground line with bucket curled. Capacity based on ISO 741:2007. Bucket weight with General Duty tips. Maximum Material Density: 1800 kg/m 3 (3,000 lb/yd 3 ) 100 kg/m 3 (2,00 lb/yd 3 ) 1200 kg/m 3 (2,000 lb/yd 3 ) 900 kg/m 3 (1,00 lb/yd 3 ) X Not Recommended Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick. 7

8 Work Tool Offering Guide* Boom Type Stick Size Undercarriage Reach Boom R2.9 (9'6") 3.7 mt (8,200 lb) Counterweight Hydraulic Hammer H11Es Compactor (Vibratory Plate) CVP110 Pin Grabber Coupler Cat PG * Offerings not available in all areas. Matches are dependent on excavator configurations. Consult your Cat dealer to determine what is offered in your area and for proper work tool match. Match 8

9 320 GC Standard and Optional Equipment Standard and Optional Equipment Standard and optional equipment may vary. Consult your Cat dealer for details. Standard Optional Standard Optional ENGINE Cat C4.4 ACERT single turbo China Nonroad Stage III UNDERCARRIAGE AND STRUCTURES Tie-down points on base frame (ISO 1818:2017 compliant) Two selectable power modes Standard bottom guards One-touch low idle with automatic engine speed control Automatic engine idle shutdown Work up to 3000 m (9,842. ft) above sea level without engine power de-rating 2 C (12 F) high-ambient cooling capacity Cold starting capability for 32 C ( 2 F) Double element air filter with integrated precleaner Standard travel motor guards Grease lubricated track links 3.7 mt (8,200 lb) counterweight Standard swing frame, for C4.4 ACERT Standard swing bearing Base frame with standard track rollers and standard carrier rollers Final drive with standard travel motor BOOM, STICKS AND LINKAGES 600 mm (24") triple grouser track shoes Electric fuel priming pump.7 m (18'8") Reach boom Reversible electric cooling fans 2.9 m (9'6") Reach stick Biodiesel capability up to B20 HYDRAULIC SYSTEM Boom and stick regeneration circuits Boom/stick lowering check valves (BLCV/SLCV) Electronic main control valve Auto hydraulic oil warm up Automatic two-speed travel Boom and stick drift reduction valve Element type main hydraulic filter Three button joysticks Slider joysticks Bucket linkage, B1-family with and without lifting eye ELECTRICAL SYSTEM Machine electronic control module ( 2) 1,000 CCA maintenance-free batteries ( 2) Centralized electrical disconnect switch Programmable time-delay LED working lights LED chassis light and LH boom light 80 lumens LED chassis light, LH and RH boom lights for Reach, cab lights 80 lumens Tandem type electronic main pump Fine swing control Simplified combined circuit (two way) CAT CONNECT TECHNOLOGY Cat Product Link (continued on next page) Quick coupler circuit for Cat Pin Grabber Operating pattern film (four way) (Hong Kong) 9

10 320 GC Standard and Optional Equipment Standard and Optional Equipment (continued) Standard and optional equipment may vary. Consult your Cat dealer for details. Standard Optional Standard Optional SERVICE AND MAINTENANCE Sampling ports for Scheduled Oil Sampling (S O S SM ) Grouped location for engine oil and fuel filters Ground level second dipstick for engine oil Side entry to service platform SAFETY AND SECURITY Rearview camera and side RH mirror Neutral lever (lock out) for all controls Anti-skid plate and countersunk bolts on service platform Ground-level accessible secondary engine shutoff switch in cab RH handrail and hand hold (ISO 2867:2011 compliant) Travel alarm (Hong Kong) 320 GC Attachments Dealer Installed Kit and Attachments Attachments may vary. Consult your Cat dealer for details. CAB RH electrical pedal (Hong Kong) Polycarbonate roof hatch GUARDS FOGS (not compatible with cab light cover, rain protector) Mesh guard full front (not compatible with cab light cover, rain protector) Mesh guard lower half front 10

11 320 GC Cab Options Cab Options ROPS, standard sound suppression High-resolution 203 mm (8") LCD touch screen monitor Automatic bi-level air conditioner Jog dial and shortcut keys for monitor control Keyless push-to-start engine control Height-adjustable console, three steps with tool Mechanically adjustable seat suspension 1 mm (2") seat belt Fixed left-side console Bluetooth integrated radio with USB ports 2 12V DC outlets Document storage Cup and bottle holders Two-piece front window, openable Upper radial wiper with 70/30 with washer Openable steel hatch LED dome and lower interior lights Roller front sunscreen Roller rear sunscreen Beacon ready Washable floor mat Straight travel pedal Comfort Standard Optional 11

12 For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at Caterpillar All rights reserved AEXQ ( ) Replaces AEXQ2198 Build Number: 07A (China/Hong Kong/Taiwan) Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

320 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Air Conditioning System. Engine rpm.

320 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Air Conditioning System. Engine rpm. 320 GC Hydraulic Excavator Technical Specifications Engine Engine Model Cat C4.4 ACERT Net Power (ISO 24) 0 kw/121 hp/165 ps Net Power (SAE J134) 0 kw/121 hp/165 ps Gross Power (ISO 1436/SAE J15) 1 kw/122

More information

Technical Specifications

Technical Specifications 323 Hydraulic Excavator Technical Specifications Engine Engine Model Cat C7.1 ACERT Net Power (ISO 9249) 117 kw 17 hp Net Power (SAE J1349) 117 kw 17 hp Gross Power (ISO 14396/SAE J199) 118 kw 18 hp Bore

More information

336 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism.

336 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism. 336 GC Hydraulic Excavator Technical Specifications Engine Engine Model Net Power ISO 9249 Net Power SAE J1349 Gross Power ISO 14396/SAE J1995 Bore Stroke Displacement Cat C7.1 ACERT 204 kw 204 kw 205

More information

320 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism.

320 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism. 320 GC Hydraulic Excavator Technical Specifications Engine Engine Model Cat C4.4 ACERT Net Power (ISO 9249) 90 kw 121 hp Net Power (SAE J1349) 90 kw 121 hp Gross Power (ISO 14396/SAE J199) 91 kw 122 hp

More information

336 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism.

336 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism. 336 GC Hydraulic Excavator Technical Specifications Engine Engine Model Cat C7.1 ACERT Net Power ISO 9249 204 kw 273 hp Net Power SAE J1349 204 kw 273 hp Gross Power ISO 14396 205 kw 275 hp Bore 105 mm

More information

Technical Specifications

Technical Specifications 320 Hydraulic Excavator Technical Specifications Engine Track Engine Model Cat C4.4 ACERT Standard with Long Undercarriage 70 mm 31 in Net Power (ISO 24) 121 kw 162 hp Number of Shoes (each side) 4 Net

More information

330 GC. Technical Specifications. Hydraulic Excavator. Engine. Track. Drive. Hydraulic System. Engine rpm. Swing Mechanism.

330 GC. Technical Specifications. Hydraulic Excavator. Engine. Track. Drive. Hydraulic System. Engine rpm. Swing Mechanism. 330 GC Hydraulic Excavator Technical Specifications Engine Engine Model Cat C7.1 Net Power ISO 9249 151 kw 202 hp Net Power SAE J1349 151 kw 202 hp Gross Power ISO 14396/SAE J1995 152 kw 204 hp Bore 105

More information

Technical Specifications

Technical Specifications 330 Hydraulic Excavator Technical Specifications Engine Engine Model Cat C7.1 Net Power ISO 9249 204 kw 273 hp Net Power SAE J1349 203 kw 272 hp Gross Power ISO 14396/SAE J1995 205 kw 275 hp Bore 105 mm

More information

320F L Hydraulic Excavator Specifications

320F L Hydraulic Excavator Specifications Engine Engine Model Cat C4.4 ACERT Engine Power SAE J1995 122 kw 164 hp Net Power SAE J1349 120 kw 161 hp Engine rpm Operation Travel 1,800 rpm 1,800 rpm Bore 105 mm 4.13 in Stroke 127 mm 5.00 in Displacement

More information

335F L. Hydraulic Excavator 2017

335F L. Hydraulic Excavator 2017 335F L Hydraulic Excavator 2017 Engine Drive Engine Model Cat C7.1 ACERT Maximum Travel Speed 4.2/2.6 km/h 2.6/1.6 mph Gross Power SAE J1995 152 kw 204 hp Maximum Drawbar Pull 295 kn 66,319 lbf Net Power

More information

320E L. Hydraulic Excavator

320E L. Hydraulic Excavator 320E L Hydraulic Excavator Engine Drive Engine Model Cat C6.6 ACERT Maximum Travel Speed 5.6 km/h 3.5 mph Net Power SAE J1349 114 kw 153 hp Maximum Drawbar Pull 205 kn 46,086 f Gross Power SAE J1995 122

More information

Technical Specifications

Technical Specifications Hydraulic Excavator Technical Specifications Enge Track Enge Model Cat C7.1 ACERT Standard Track Shoe Width 600 24 Net Power (ISO 9249) 117 kw 157 hp Number of Shoes (each side) 49 Net Power (SAE J1349)

More information

313F/313F L Hydraulic Excavator Specifications

313F/313F L Hydraulic Excavator Specifications Engine Drive Engine Model Cat C4.4 ACERT Gradeability 30 /70% Net Power SAE J1349/ISO 9249 68 kw (92 PS) Maximum Travel Speed 5.4 km/h Engine Power ISO 14396 74 kw (101 PS) Maximum Drawbar Pull 113 kn

More information

316E. Hydraulic Excavator

316E. Hydraulic Excavator E Hydraulic Excavator Introduction Since its introduction in the 990s, the 00 Series family of excavators has become the industry standard in general, quarry, and heavy construction applications. The all-new

More information

336E H Hydraulic Excavator

336E H Hydraulic Excavator Dimensions All dimensions are approximate. 2 3 1 9 7 8 6 4 HD Reach Boom 6.0 m (21'4") Stick R3.9DB 12'" R3.2DB '6" 1 Shipping Height including Shoe Lug Height 3660 mm 12'0" 3 mm 11'6" Shipping Height

More information

352F LRE. Hydraulic Excavator. Engine Engine Model

352F LRE. Hydraulic Excavator. Engine Engine Model 352F LRE Hydraulic Excavator Engine Engine Model Cat C13 ACERT Net Power ISO 9249 304 kw 408 hp Engine Power ISO 14396 317 kw 425 hp Working Range Maximum Reach at Ground Level 19 640 mm 64'5" Drive Maximum

More information

324D/ 324D L. Hydraulic Excavator. Engine Engine Model. ACERT Technology. Net Flywheel Power Weights. Std. Undercarriage. Long Undercarriage

324D/ 324D L. Hydraulic Excavator. Engine Engine Model. ACERT Technology. Net Flywheel Power Weights. Std. Undercarriage. Long Undercarriage D/ D L Hydraulic Excavator Engine Engine Model Net Flywheel Power Weights Operating Weight Std. Undercarriage Operating Weight Long Undercarriage Cat C with ACERT Technology 0 kw 0 kg 0 kg Engine Engine

More information

340F Long Reach Hydraulic Excavator

340F Long Reach Hydraulic Excavator 340F Long Reach Hydraulic Excavator Introduction The Cat 340F Long Reach excavator is built to keep your production numbers up and your owning and operating costs down. Not only does the machine s C9.3

More information

M323F. Technical Specifications. Railroad Wheeled Excavator. Engine. Tires. Drive. Hydraulic System. Swing Mechanism. Weights. Cat C4.

M323F. Technical Specifications. Railroad Wheeled Excavator. Engine. Tires. Drive. Hydraulic System. Swing Mechanism. Weights. Cat C4. M323F Railroad Wheeled Excavator Technical Specifications Engine Engine Model Ratings Cat C4.4 ACERT 2,000 rpm Rated Net Power (ISO 24/SAE J134) 112 kw/152 PS Maximum Net Power (ISO 24/SAE J134) 112 kw/152

More information

320 GC HYDRAULIC EXCAVATOR. Cat C4.4 ACERT Engine meets China III Nonroad emission standards (U.S. EPA Tier 3 and EU Stage IIIA).

320 GC HYDRAULIC EXCAVATOR. Cat C4.4 ACERT Engine meets China III Nonroad emission standards (U.S. EPA Tier 3 and EU Stage IIIA). 320 GC HYDRAULIC EXCAVATOR Engine Power Operating Weight 107 kw (143 hp) 20 500 kg (45,200 lbs) Cat C4.4 ACERT Engine meets China III Nonroad emission standards (U.S. EPA Tier 3 and EU Stage IIIA). NEXT

More information

336 GC HYDRAULIC EXCAVATOR

336 GC HYDRAULIC EXCAVATOR 336 GC HYDRAULIC EXCAVATOR Engine Power Operating Weight 194 kw (259 hp) 33 900 kg (74,800 lb) Cat C7.1 ACERT Engine meets Brazil MAR-1 and China Nonroad Stage III emission standards, equivalent to U.S.

More information

320 GC HYDRAULIC EXCAVATOR. Operating Weight North America kg (48,281 lb) Operating Weight Europe kg (46,958 lb)

320 GC HYDRAULIC EXCAVATOR. Operating Weight North America kg (48,281 lb) Operating Weight Europe kg (46,958 lb) 320 GC HYDRAULIC EXCAVATOR Engine Power 90 kw (121 hp) Operating Weight North America 21 900 kg (48,281 lb) Operating Weight Europe 21 300 kg (46,958 lb) Cat C4.4 ACERT Engine meets U.S. EPA Tier 4 Final

More information

330 GC HYDRAULIC EXCAVATOR. 158 kw (212 hp) kg (62,700 lb) Engine Power Operating Weight

330 GC HYDRAULIC EXCAVATOR. 158 kw (212 hp) kg (62,700 lb) Engine Power Operating Weight 330 GC HYDRAULIC EXCAVATOR Engine Power Operating Weight 158 kw (212 hp) 28 400 kg (62,700 lb) Cat C7.1 engine meets China Nonroad Stage III, UNECE R96 Stage IIIA and Brazil MAR-1 emission standards, equivalent

More information

352F. Hydraulic Excavator. Engine Engine Model

352F. Hydraulic Excavator. Engine Engine Model 352F Hydraulic Excavator Engine Engine Model Cat C13 ACERT Net Power SAE J1349 311 kw 417 hp Drive Maximum Travel Speed 4.7 km/h 2.9 mph Maximum Drawbar Pull 335 kn 75,300 lbf Weights Maximum Weight 52

More information

308E2 CR SB. Mini Hydraulic Excavator with Swing Boom

308E2 CR SB. Mini Hydraulic Excavator with Swing Boom 308E2 CR SB Mini Hydraulic Excavator with Swing Boom Engine Weights Engine Model* Cat C3.3B Operating Weight with Cab 8400 kg 18,519 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications *Engine

More information

352F. Hydraulic Excavator

352F. Hydraulic Excavator 352F Hydraulic Excavator Engine Drive Engine Model Cat C13 ACERT Maximum Travel Speed 4.7 km/h 2.9 mph Net Power SAE J1349 311 kw 417 hp Maximum Drawbar Pull 335 kn 75,300 f Weights Maximum Weight 52 500

More information

308E. Mini Hydraulic Excavator

308E. Mini Hydraulic Excavator 308E Mini Hydraulic Excavator Engine Weights Engine Model Cat C3.3 DI Turbo Operating Weight Standard Stick 7160 kg Net Power @ 2,400 rpm 46.8 kw Operating Weight Long Stick 7190 kg Gross Power @ 2,000

More information

340F. Hydraulic Excavator. Engine Model Cat C9.3 ACERT Minimum Weight kg Power ISO 9249 (metric) 228 kw (310 PS) Maximum Weight kg

340F. Hydraulic Excavator. Engine Model Cat C9.3 ACERT Minimum Weight kg Power ISO 9249 (metric) 228 kw (310 PS) Maximum Weight kg 340F Hydraulic Excavator Engine Weights Engine Model Cat C9.3 ACERT Minimum Weight 40 100 kg Power ISO 9249 (metric) 228 kw (310 PS) Maximum Weight 42 800 kg Power ISO 14396 (metric) 234 kw (318 PS) Drive

More information

330 GC HYDRAULIC EXCAVATOR

330 GC HYDRAULIC EXCAVATOR 330 GC HYDRAULIC EXCAVATOR Engine Power Operating Weight 151 kw (202 hp) 30 700 kg (67,700 lb) Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final

More information

320D GC Series 2. Hydraulic Excavator

320D GC Series 2. Hydraulic Excavator 320D GC Series 2 Hydraulic Excavator Engine Weights Engine Model Cat C7.1 Minimum Operating Weight 20 610 45,440 Engine Power (ISO 14396) 112.5 kw 151 hp Maximum Operating Weight 21 185 46,700 Net Power

More information

303E CR. Mini Hydraulic Excavator

303E CR. Mini Hydraulic Excavator 303E CR Mini Hydraulic Excavator Engine Weight Gross Power 18.5 kw 24.8 hp Operating Weight with Canopy 3048 kg 6,721 lb Net Power 17.5 kw 23.5 hp Operating Weight with Cab 3267 kg 7,204 lb The Cat 303E

More information

340F LRE/352F LRE. Long Reach Excavation Hydraulic Excavators

340F LRE/352F LRE. Long Reach Excavation Hydraulic Excavators 340F LRE/352F LRE Long Reach Excavation Hydraulic Excavators Engine 340F LRE 352F LRE Drive 340F LRE 352F LRE Engine Model Cat C9.3 ACERT C13 ACERT Maximum Travel Speed 4.8 km/h 4.7 km/h Power ISO 9249

More information

Standards. Engine. Hydraulic System. Weights. Service Refill Capacities. Drive. Swing Mechanism. Sound Performance. Track

Standards. Engine. Hydraulic System. Weights. Service Refill Capacities. Drive. Swing Mechanism. Sound Performance. Track Engine Engine Model Cat T Diesel Engine Flywheel Power kw hp ISO kw hp SAE J kw hp EEC / kw hp Bore mm. in Stroke mm. in Displacement. L in Gross Power kw hp The C/C L meets US Tier and EU Stage II emissions

More information

307E2. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.

307E2. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55. 307E2 Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights

More information

352F. Hydraulic Excavator

352F. Hydraulic Excavator 352F Hydraulic Excavator Engine Drive Engine Model Cat C13 ACERT Maximum Travel Speed 4.7 km/h Power ISO 9249 (metric) 311 kw 413 PS Maximum Drawbar Pull 335 kn Weights Minimum Weight 51 100 kg Maximum

More information

352F. Hydraulic Excavator. Engine Engine Model. Drive Maximum Travel Speed Maximum Drawbar Pull Weights

352F. Hydraulic Excavator. Engine Engine Model. Drive Maximum Travel Speed Maximum Drawbar Pull Weights 352F Hydraulic Excavator Engine Engine Model Cat C13 ACERT Power ISO 9249 (metric) 311 kw 413 PS Drive Maximum Travel Speed Maximum Drawbar Pull Weights Minimum Weight Maximum Weight 4.7 km/h 335 kn 51

More information

303E CR. Mini Hydraulic Excavator. Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp

303E CR. Mini Hydraulic Excavator. Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp 303E CR Mini Hydraulic Excavator Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp Weight Operating Weight with Canopy 3310 kg 7,297 lb Operating Weight with Cab 3530 kg 7,782 lb The Cat 303E

More information

340F L UHD. Ultra High Demolition Hydraulic Excavator

340F L UHD. Ultra High Demolition Hydraulic Excavator 340F L UHD Ultra High Demolition Hydraulic Excavator Engine Working Range Engine Model Cat C9.3 ACERT Maximum Pin Height 21 700 mm Power ISO 14396 234 kw 318 PS Maximum Weight at Stick Nose 3600 kg Power

More information

306E. Mini Hydraulic Excavator. Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg

306E. Mini Hydraulic Excavator. Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg 306E Mini Hydraulic Excavator Engine Weights Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) 306E Features Increased Performance

More information

312E. Hydraulic Excavator

312E. Hydraulic Excavator 312E Hydraulic Excavator Engine Drive Engine Model Cat C4.4 ACERT Maxiu Travel Speed 5.5 k/h 3.4 ph Net Power SAE J1349 68 kw 91 hp Maxiu Drawbar Pull 114 kn 25,628 f Gross Power SAE J1995 71 kw 95 hp

More information

307E2. Mini Hydraulic Excavator

307E2. Mini Hydraulic Excavator 307E2 Mini Hydraulic Excavator Engine Weights Engine Model* Cat C2.4 Turbo Operating Weight with Cab 7270 kg 16,028 lb Net Power (ISO 9249) 37.7 kw 50.6 hp Operating Specifications *Engine meets U.S. EPA

More information

Technical Specifications

Technical Specifications 140 Motor Grader Technical Specifications Engine Engine Model Cat C9.3 Net Power ISO 9249/SAE J1349 186 kw 250 hp Net Power EEC 80/1269 186 kw 250 hp Net Power All-Wheel Drive (AWD) 201 kw 270 hp VHP Plus

More information

305C CR. Mini Hydraulic Excavator. Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight)

305C CR. Mini Hydraulic Excavator. Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight) 305C CR Mini Hydraulic Excavator Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight) With canopy With cab 35 kw/47.6 hp 5035 kg 5155 kg Caterpillar 305C CR Mini

More information

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi)

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) 925E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 25,500 kg (56,218 lb) Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes, boom, arm, bucket and operator

More information

336D2 GC. Hydraulic Excavator. Engine Engine Model Engine Power (ISO 14396) 209 kw 281 hp Net Power (SAE J1349/ISO 9249) 208 kw 279 hp

336D2 GC. Hydraulic Excavator. Engine Engine Model Engine Power (ISO 14396) 209 kw 281 hp Net Power (SAE J1349/ISO 9249) 208 kw 279 hp 336D2 GC Hydraulic Excavator Engine Engine Model Cat C9 ACERT Engine Power (ISO 14396) 209 kw 281 hp Net Power (SAE J1349/ISO 9249) 208 kw 279 hp Weights Operating Weight Standard Undercarriage 33 100

More information

303.5E CR, 304E CR, 305E CR, 305.5E CR

303.5E CR, 304E CR, 305E CR, 305.5E CR 303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw

More information

313D GC Series 2. Hydraulic Excavator 2017

313D GC Series 2. Hydraulic Excavator 2017 313D GC Series 2 Hydraulic Excavator 2017 Engine Weights Engine Model Cat C4.4 Minimum Operating Weight 12 500 kg 27,557 lb Engine Power (ISO 14396) 75 kw 100 hp Maximum Operating Weight 13 400 kg 29,542

More information

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34.

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34. 922E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 22,800 kg (50,265 lb) SWING SYSTEM ELECTRIC SYSTEM Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes,

More information

323 Engine Power Operating Weight

323 Engine Power Operating Weight 323 HYDRAULIC EXCAVATOR Engine Power Operating Weight 121 kw (162 hp) 24 400 kg (53,793 lbs) Cat C7.1 ACERT Engine meets U.S. EPA Tier 4 Final and EU Stage IV emission standards with an aftertreatment

More information

301.7D CR. Mini Hydraulic Excavator

301.7D CR. Mini Hydraulic Excavator 301.7D CR Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Transport Weight with Canopy 1610 kg 3,550 lb Rated Net Power @ 2,200 rpm (ISO 9249) 13.2 kw 17.7 hp Operating

More information

320 Engine Power Operating Weight

320 Engine Power Operating Weight 320 HYDRAULIC EXCAVATOR Engine Power Operating Weight 121 kw (162 hp) 22 700 kg (50,100 lbs) Cat C4.4 ACERT Engine meets U.S. EPA Tier 4 Final and EU Stage IV emission standards with an aftertreatment

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

320D2 GC. Hydraulic Excavator 2017

320D2 GC. Hydraulic Excavator 2017 320D2 GC Hydraulic Excavator 2017 Engine Weights Engine Model Cat C4.4 ACERT Operating Weight 20 100 kg 44,300 lb Engine Power (ISO 14396) 93 kw 125 hp Net Power (SAE J1349/ISO 9249) 85 kw 114 hp 320D2

More information

320 Engine Power Operating Weight

320 Engine Power Operating Weight 320 HYDRAULIC EXCAVATOR Engine Power Operating Weight 121 kw (162 hp) 22 500 kg (49,600 lb) Cat C4.4 ACERT Engine meets U.S. EPA Tier 4 Final and EU Stage IV emission standards with an aftertreatment system

More information

TOUGH WORLD. TOUGH EQUIPMENT.

TOUGH WORLD. TOUGH EQUIPMENT. Engine Yanmar 4TNV98 Net Power 44.5 kw (60 hp) Operating Weight 7,500 kg Bucket Capacity 0.32 m³ 908E EXCAVATOR TOUGH WORLD. TOUGH EQUIPMENT. 1 MAXIMIZE YOUR RETURN ON INVESTMENT POWERFUL ENGINE The 908E

More information

330D MH Material Handler

330D MH Material Handler 330D MH Material Handler Engine Engine Model Cat C9 ACERT Net Flywheel Power 200 kw 268 hp Weights Operating Weight 44 627 kg 98,386 lb Operating Specifications Max. Reach 6.1 m (20'0") Stick 14.6 m 47

More information

302.5C Mini Hydraulic Excavator

302.5C Mini Hydraulic Excavator 302.5C Mini Hydraulic Excavator Engine Rated net power 18.6 kw 24.9 hp (ISO 9249) Weights Operating weight 2745 kg 6,052 lb with canopy Operating weight 2850 kg 6,283 lb with cab Weight with rubber tracks,

More information

301.4C. Mini Hydraulic Excavator

301.4C. Mini Hydraulic Excavator 301.4C Mini Hydraulic Excavator Engine Net Power 13.2 kw 17.7 hp Weight Transport Weight with Canopy 1380 kg 3,042 lb Transport Weight with Cab 1470 kg 3,241 lb Versatility Easy to transport and greater

More information

301.4C. Mini Hydraulic Excavator

301.4C. Mini Hydraulic Excavator 301.4C Mini Hydraulic Excavator Engine Gross Power 17.9 kw 24.3 hp Weight Transport Weight with Canopy 1380 kg 3,042 lb Transport Weight with Cab 1470 kg 3,241 lb Versatility Easy to transport and greater

More information

340D L Series 2 Engine Weights

340D L Series 2 Engine Weights 340D L Series 2 Hydraulic Excavator Engine Engine Model Cat C9 with ACERT Technology Engine Power (ISO 14396) 209 kw 281 hp Net Power (SAE J1349/ISO 9249) 200 kw 270 hp Weights Operating Weight Long Undercarriage

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

313D Series 2. Hydraulic Excavator

313D Series 2. Hydraulic Excavator 313D Series 2 Hydraulic Excavator Engine Weights Engine Model C4.4 Operating Weight Standard Configuration 16 300 kg 35,935 lb Engine Power (ISO 14396) 74.5 kw 99.9 hp Net Power (SAE J1349/ISO 9249) 70.6

More information

350 MH. Material Handler

350 MH. Material Handler 0 MH Material Handler The Cat 0 Material Handler is specifically designed for the scrap and material handling customer. This machine uses the most sophisticated manufacturing technology to ensure the highest

More information

324E L. Hydraulic Excavator

324E L. Hydraulic Excavator 324E L Hydraulic Excavator Enge Drive Enge Model Cat C7.1 ACERT Maximum Travel Speed 5.3 km/h 3.3 mph Net Power ISO 14396 (metric) 151 kw 205 hp Maximum Drawbar Pull 227 kn 51,032 f Net Power ISO 14396

More information

D8T WH. Waste Handler

D8T WH. Waste Handler D8T WH Waste Handler The Cat D8T Waste Handler has earned a reputation for best-in-class versatility, productivity and resale value. Landfill customers choose the D8T WH because it excels at multiple tasks

More information

318D L Series 2. Hydraulic Excavator 2017

318D L Series 2. Hydraulic Excavator 2017 318D L Series 2 Hydraulic Excavator 2017 Engine Weights Engine Model C4.4 ACERT Operating Weight Long Undercarriage 17 000 37,490 Engine Power (ISO 14396) 93.0 kw 125 hp 17 800 kg 39,250 lb Net Power (SAE

More information

336E H. Hydraulic Excavator

336E H. Hydraulic Excavator 336E H Hydraulic Excavator Engine Drive Engine Model Cat C9.3 (ATAAC) Maximum Travel Speed 4.9 km/h 3 mph Net Power SAE J1349 230 kw 308 hp Maximum Drawbar Pull 295 kn 66,319 lbf Weights Minimum Operating

More information

300.9D. Mini Hydraulic Excavator

300.9D. Mini Hydraulic Excavator 300.9D Mini Hydraulic Excavator Engine Gross Power (ISO 14396) 13.7 kw 18 hp Net Power 9.6 kw 13 hp Weight Operating weight without Safety frame 935 kg 2,061 lb Operating weight with Safety frame 985 kg

More information

HYDRAULIC EXCAVATOR. Cat C7.1 Engine meets China III Nonroad emission standards (U.S. EPA Tier 3 and EU Stage IIIA).

HYDRAULIC EXCAVATOR. Cat C7.1 Engine meets China III Nonroad emission standards (U.S. EPA Tier 3 and EU Stage IIIA). 320 HYDRAULIC EXCAVATOR Engine Power Operating Weight 117 kw (157 hp) 22 400 kg (49,400 lb) Cat C7.1 Engine meets China III Nonroad emission standards (U.S. EPA Tier 3 and EU Stage IIIA). NEXT GENERATION

More information

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp) ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA

More information

318E. Hydraulic Excavator

318E. Hydraulic Excavator 318E Hydraulic Excavator Engine Weights Engine Model Cat C4.4 ACERT Minimum Operating Weight 18 600 kg 41,010 lb Net Power SAE J1349 85 kw 113 hp Maximum Operating Weight 19 200 kg 42,340 lb Drive Maximum

More information

M325B MH Wheeled Material Handler

M325B MH Wheeled Material Handler M2B MH Wheeled Material Handler Engine Engine Model 11 TA Net Flywheel Power 12 kw 18 hp Operating Specifications Maximum Reach. m.9 ft Cat Cab Riser 1.9 m.4 ft Weights Operating Weight 7 2 kg 82,4 lb

More information

312E Hydraulic Excavator

312E Hydraulic Excavator Diensions All diensions are approxiate. 3 9 1 7 8 6 2 4 5 10 Reach Boo 4.65 (15'3") Stick R3.0 R2.8 R2.5 (9'10") (9'2") (8'2") () () () 1 Shipping Height* 2980 (9'9") 2980 (9'9") 2980 (9'9") Shipping Height

More information

313D2 L. Hydraulic Excavator 2017

313D2 L. Hydraulic Excavator 2017 313D2 L Hydraulic Excavator 2017 Engine Weights Engine Model Cat C4.4 Operating Weight 13 500 kg 29,762 lb Engine Power (ISO 14396) 74.5 kw 100 hp Net Power (SAE J1349/ISO 9249) 68.2 kw 91 hp 313D2 L Features

More information

336F Straight Boom. Hydraulic Excavator

336F Straight Boom. Hydraulic Excavator 336F Straight Boom Hydraulic Excavator Engine Drive Engine Model Cat C9.3 ACERT Maximum Travel Speed 4.8 km/h Power ISO 14396 234 kw 313 hp 318 PS Maximum Drawbar Pull 291 kn Power ISO 9249 228 kw 306

More information

303.5E CR, 304E CR, 305E CR, 305.5E CR. Mini Hydraulic Excavators. Engine Engine Model Weights. Operating Specifications. Courtesy of Machine.

303.5E CR, 304E CR, 305E CR, 305.5E CR. Mini Hydraulic Excavators. Engine Engine Model Weights. Operating Specifications. Courtesy of Machine. , 304E CR, 305E CR, Mini Hydraulic Excavators Engine Engine Model Net Power (ISO 9249) Weights Operating Weight with Canopy Operating Weight with Cab Operating Specifications Maximum Dig Depth 304E CR

More information

DX140LC TECHNICAL DATA

DX140LC TECHNICAL DATA DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS

More information

DX420LC TECHNICAL DATA

DX420LC TECHNICAL DATA DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw

More information

953D SH 963D SH 973D SH

953D SH 963D SH 973D SH 95D SH 96D SH 97D SH Shiphold/Port Handling Supplement Note: For standard specifications and features, refer to the standard Caterpillar specalog for this machine. 95D SH 96D SH 97D SH Engine Engine Model

More information

HYDRAULIC EXCAVATOR. Cat C9.3B Engine meets U.S. EPA Tier 4 Final, EU Stage IV, and Japan 2014 emission standards.

HYDRAULIC EXCAVATOR. Cat C9.3B Engine meets U.S. EPA Tier 4 Final, EU Stage IV, and Japan 2014 emission standards. 336 HYDRAULIC EXCAVATOR Engine Power Operating Weight 232 kw (311 hp) 37 200 kg (81,900 lb) Cat C9.3B Engine meets U.S. EPA Tier 4 Final, EU Stage IV, and Japan 2014 emission standards. NEXT GENERATION

More information

CX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m)

CX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m) CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Isuzu AM-4JJ1X, Tier 4 Interim Certified (Cooled EGR) Fuel Type Cylinders Requires ultra low-sulfur fuel B5 biodiesel tolerant

More information

316E L. Hydraulic Excavator

316E L. Hydraulic Excavator 316E L Hydraulic Excavator Engine Drive Engine Model Cat C4.4 ACERT Maxiu Travel Speed 5.2 k/h 3.2 ph Engine Power ISO 14396 89 kw 119 hp Maxiu Drawbar Pull 156.2 kn 35,115 f Weights Miniu Operating Weight

More information

313F L GC. Hydraulic Excavator 2017

313F L GC. Hydraulic Excavator 2017 313F L GC Hydraulic Excavator 2017 Engine Drive Engine Model Cat C3.4B Maximum Travel Speed 5.5 km/h Engine Power ISO 14396 (metric) 55 kw 74 hp Maximum Drawbar Pull 109.9 kn Net Power ISO 9249 (metric)

More information

Cat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading.

Cat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading. Cat F BACKHOE LOADER The Cat F Backhoe Loader delivers performance, increased fuel efficiency, superior hydraulic system and an all new operator station. The F features the following: Ergonomic Operator

More information

Specif ications R125LCR-9A

Specif ications R125LCR-9A Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power

More information

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb NET HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 31925 33178 kg 70,383 73,146 lb PC308USLC-3 BUCKET CAPACITY 0.74 1.87 m 3 0.97 2.45 yd 3 PC 308US LC Photo may include optional equipment. HYDRAULIC

More information

325D Material Handler

325D Material Handler 32D Material Handler Engine Engine Model Cat C7 ACERT Net Flywheel Power 12 kw 204 hp Weights Operating Weight 3 26 kg 78,321 lb Operating Specifications Max Reach 19'8" Stick 14 121 mm 46 ft 4 in Max

More information

308E2 CR. Mini Hydraulic Excavator

308E2 CR. Mini Hydraulic Excavator 308E2 CR Mini Hydraulic Excavator Engine Weights Engine Model* Cat C3.3B Operating Weight with Cab 8400 kg 18,519 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications *Engine meets U.S. EPA Tier

More information

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,

More information

EC140B LC VOLVO EXCAVATOR

EC140B LC VOLVO EXCAVATOR VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection

More information

314E L CR. Hydraulic Excavator

314E L CR. Hydraulic Excavator 314E L CR Hydraulic Excavator Engine Weight Engine Model Cat C4.4 ACERT Operating Weight Net Power SAE J1349 67 kw 89 hp Long Undercarriage 15 000 kg 33,070 lb Drive Maximum Travel Speed 5.4 km/h 3.4 mph

More information

313D2 L. Hydraulic Excavator 2017

313D2 L. Hydraulic Excavator 2017 313D2 L Hydraulic Excavator 2017 Engine Weights Engine Model Cat C4.4 Minimum Operating Weight 13 400 29,550 Engine Power (ISO 14396) 75 kw 100 hp Maximum Operating Weight 14 100 31,090 Net Power (SAE

More information

301.5, 301.6, Mini Hydraulic Excavator

301.5, 301.6, Mini Hydraulic Excavator 301.5, 301.6, 301.8 Mini Hydraulic Excavator 301.5 301.6 301.8 Cat 3003 Naturally Aspirated Diesel Engine Flywheel Power 13 kw 17.4 hp 13 kw 17.4 hp 13 kw 17.4 hp Operating Weight With canopy 1616 kg 3563

More information

305 CR. Mini Hydraulic Excavator

305 CR. Mini Hydraulic Excavator 305 CR Mini Hydraulic Excavator Engine Power Gross 32 kw 43 hp Net 31.3 kw 42 hp Maximum Operating Weight With cab 4990 kg 11,000 lb With canopy 4940 kg 10,890 lb 305 CR Mini Hydraulic Excavator Designed

More information

340F UHD Ultra High Demolition

340F UHD Ultra High Demolition 0F UHD Ultra High Demolition Hydraulic Excavator Engine Working Range Engine Model Cat C9. ACERT Maximum Pin Height 1 00 Power ISO 19 kw 18 PS Maximum Weight at Stick Nose 00 kg Power ISO 99 8 kw 10 PS

More information

320F L. Hydraulic Excavator 2017

320F L. Hydraulic Excavator 2017 320F L Hydraulic Excavator 2017 Engine Drive Engine Model Cat C4.4 ACERT Maximum Travel Speed High 5.6 km/h 3.5 mph Engine Power SAE J1995 122 kw 164 hp Maximum Drawbar Pull 205 kn 46,086 lb Net Power

More information