Machine for Industrial Applications LH 80 M
|
|
- Edmund Hill
- 5 years ago
- Views:
Transcription
1 Machine for Industrial Applications LH M litronic` : 7, 7,9 kg Engine: 3 kw / 313 HP Stage IIIB / Tier i Max. Syste Perforance: 3 kw
2 Technical Data Engine Rating per ISO 99 Model Type Bore/Stroke Displaceent Engine operation Harful eissions values Eission control Cooling Air cleaner Fuel tank Engine idling Electrical syste Voltage Batteries Alternator Power distribution Hydraulic Controls Servo circuit Attachent and swing Travel Additional functions Option 3 kw (313 HP) at 1,7 RPM Liebherr D93 according to stage IIIB / Tier i cylinder in-line 1/1 1. l -stroke diesel Coon-Rail turbo-charged and aer-cooled reduced eissions in accordance with 97//EG stage IIIB Liebherr particle filter water-cooled with integrated otor oil cooler dry-type air cleaner with pre-cleaner, priary and safety eleents 91 l sensor controlled V x 17 Ah/1 V three phase current V/1 A via control valves in single block with integrated safety valves with hydraulic pilot control and proportional joystick levers electroproportional via foot pedal via switch or electroproportional foot pedals proportional control, proportionally acting transitters on the joysticks for additional hydraulic functions Hydraulic Syste Hydraulic pup for attachent and travel drive Max. flow Max. pressure Hydraulic pup regulation and control Hydraulic pup for swing drive Max. flow Max. pressure Hydraulic tank Hydraulic syste Hydraulic oil filter Hydraulic oil cooler MODE selection S (Sensitive) E (ECO) P (Power) Tool Control (Option) two Liebherr variable flow, swashplate pups (double construction) x 3 l/in. 3 bar electro-hydraulic with electronic engine speed sensing regulation, pressure copensation, flow copensation, autoatic oil flow optiizer reversible, variable flow, swashplate pup, closedloop circuit 1 l/in. 3 bar 39 l 91 l ain return filters with integrated partial icro filtration ( μ) cooling syste, consisting of a cooling unit for water and charge air and a nd cooler for hydraulic oil, each with an infinitely variable, therostatically controlled fan drive syste adjustent of engine and hydraulic perforance via a ode pre-selector to atch application, e.g. for especially econoical and environentally friendly operation or for axiu aterial handling and heavy-duty jobs for precision work and liing through very sensitive oveents for especially econoical and environentally friendly operation for axiu digging power and heavy duty jobs ten preadjustable pup flows and pressures for add on tools Swing Drive Drive Liebherr swashplate otor in a closed syste with integrated brake valve Transission Liebherr planetary reduction gear Swing ring Liebherr, sealed single race ball bearing swing ring, internal teeth Swing speed. RPM stepless Swing torque 1 kn Brake holding brake (spring applied pressure released) Option pedal controlled positioning swing brake LH M Litronic Machine for Industrial Applications
3 Technical Data Type Cab Operator s Cab Operator s seat Standard Operator s seat Cofort (Option) Operator s seat Preiu (Option) Control syste Operation and displays Air-conditioning Uppercarriage slewing platfor ade fro high-strength steel plate, designed for the toughest requireents safety cab structure with individual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a side window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddaping insulating, tinted lainated safety glass, separate shades for the sunroof window and windscreen air cushioned operator s seat with headrest, lap belt, seat heater, anual weight adjustent, adjustable seat cushion inclination and length and echanical lubar vertebrae support in addition to operator s seat standard: lockable horizontal suspension, autoatic weight adjustent, adjustable suspension stiffness, pneuatic lubar vertebrae support and passive seat cliatisation with active coal in addition to operator s seat cofort: active electronic weight adjustent (autoatic readjustent), pneuatic low frequency suspension and active seat cliatisation with active coal and ventilator joysticks with ar consoles and swivel seat large high-resolution operating unit, selfexplanatory, colour display with touchscreen, video-copatible, nuerous setting, control and onitoring options, e.g. air conditioning control, fuel consuption, achine and tool paraeters autoatic air-conditioning, recirculated air function, fast de-icing and deisting at the press of a button, air vents can be operated via a enu; recirculated air and fresh air filters can be easily replaced and are accessible fro the outside; heating-cooling unit, designed for extree outside teperatures, sensors for solar radiation, inside and outside teperatures Noise eission ISO 39 L pa (inside cab) = 71 db(a) /1/EC L WA (surround noise) = 1 db(a) Type Drive Travel speed Driving operation Axles Service brake Holding brake Stabilization Type Undercarriage Attachent Hydraulic cylinders Energy recovering cylinder Bearings Lubrication Coplete Machine torsion-resistant box design ade fro high-strength steel plate, designed for the toughest requireents variable flow swashplate otor with autoatic brake valve 1 k/h stepless autootive driving using accelerator pedal, cruise control function: storage of variable accelerator pedal positions 9 t drive axles; anual or autoatic hydraulically controlled front axle oscillation lock two circuit travel brake syste with accuulator; aintenance-free, wet and backlash-free disc brake wet, aintenance-free ulti disc brakes point outriggers high-strength steel plates at highlystressed points for the toughest requireents. Coplex and stable ountings of attachent and cylinders Liebherr cylinders with special seal syste. Shock absorption Liebherr gas cylinder with special sealing and control syste sealed, low aintenance central lubrication syste for uppercarriage and attachent, autoatically LH M Litronic Machine for Industrial Applications 3
4 Diensions Choice of Cab Elevation Cab Elevation LFC (Rigid Elevation) Cab Elevation LHC (Hydraulic Elevation) D D1 D C B C B C1 B1 E H Increase type LFC 1 LFC 1 LFC Height 1, 1,, B,,9, C,3,3,3 D 1,1 1,1 1,1 A rigid cab elevation has a fixed eye level height. For a lower transport height, the shell of the cab can be reoved and replaced by a transport device. The diension C is in this achine design for all rigid cab elevations,33. Tyres 3. x Increase type LHC LHC 3-3 LHC 3 B1 3,7 3,39 3,9 B,3 7, 7, C1,3,3,3 C,77 7,79,11 D1 1,711,, D 1,37, 3,3 E 3,971,31,11 The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any tie within the stroke. LH M Litronic Machine for Industrial Applications
5 Attachent GA1 Kineatic A H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type straight ono boo 1. and industrial-type angled stick 7.. with grapple odel GMM /1.7 3 sei-closed tines Diensions H7 7, kg Undercarriage 19. pt. outriggers down 1.* 1.* 1.9* 1.9* pt. outriggers down 1.* 1.* 1.* 1.* 1.* 1.* pt. outriggers down 1.7* 1.7* 1.* 1.* 1.* 1.* 9.* 9.* pt. outriggers down 1.* 1.* 13.* 13.* 1.1* 1.1*.*.* pt. outriggers down 1.3* 1.3* 13.7* 13.7* 1.* 1.* 11.* 11.*.*.* pt. outriggers down 1.* 1.* 13.* 13.* 1.* 1.* 11.* 11.* 1.* 1.*.1*.1* pt. outriggers down 17.3* 17.3* 1.7* 1.7* 13.9* 13.9* 1.* 1.* 11.* 11.* 1.* 1.* 7.9* 7.9* pt. outriggers down 1.* 1.* 1.1* 1.1* 1.* 1.* 1.* 1.* 11.* 11.* 1.7* 1.7* 9.* 9.* 7.9* 7.9* pt. outriggers down 19.* 19.* 19.* 19.* 1.7* 1.7* 1.* 1.* 13.1* 13.1* 11.* 11.* 1.* 1.* * 7.9* 7.9* 17.. pt. outriggers down.*.*.*.* 17.* 17.* 1.1* 1.1* 13.3* 13.3* 1.* 1.* 1.* 1.* 9. 9.* 7.9* 7.9* pt. outriggers down 7.* 7.* 1.* 1.* 1.1* 1.1* 1.* 1.* 13.* 13.* 1.1* 1.1* 1.9* 1.9* *.1*.1* pt. outriggers down.*.*.7*.7* 1.7* 1.7* 1.9* 1.9* 13.* 13.* 1.* 1.* 1. 1.* *.1*.1* pt. outriggers down 1.* 1.* 3.* 3.* 19.* 19.* 1.1* 1.1* 13.9* 13.9* 1.* 1.* * 9. 9.* 7.* 7.* 17. pt. outriggers down 9.* 9.*.9*.9* 1.* 1.* 1.9* 1.9* 13.7* 13.7* 11.9* 11.9* 1.3* 1.3*.*.* 7.* 7.* pt. outriggers down 9.* 9.* 17.* 17.* 1.* 1.* 1.3* 1.3* 13.1* 13.1* 11.* 11.* 9.* 9.* 7.* 7.*.*.* pt. outriggers down 17.* 17.* 1.3* 1.3* 1.* 1.* 11.9* 11.9* 1.1* 1.1*.*.* 7.* 7.* 1.. pt. outriggers down 11.9* 11.9* 1.1* 1.1* 1. Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications
6 Attachent GA19 Kineatic A H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type straight ono boo 1. and industrial-type angled stick 9.. with grapple odel GMM /1.7 3 sei-closed tines Diensions 11 7 H7 7, kg Undercarriage 1. pt. outriggers down 13.1* 13.1* 1.* 1.*. 19. pt. outriggers down 1.9* 1.9* 1.9* 1.9* 9.* 9.* pt. outriggers down 1.* 1.* 1.9* 1.9*.*.* pt. outriggers down 13.3* 13.3* 1.* 1.* 1.* 1.* 7.9* 7.9* 7.7* 7.7* pt. outriggers down 13.* 13.* 11.9* 11.9* 1.1* 1.1* 7.* 7.* pt. outriggers down 1.9* 1.9* 11.* 11.* 1.9* 1.9* 9.3* 9.3*.9*.9* pt. outriggers down 1.9* 1.9* 11.* 11.* 1.* 1.* 1.1* 1.1* 7.9* 7.9*.7*.7* pt. outriggers down 1.* 1.* 13.1* 13.1* 11.9* 11.9* 1.9* 1.9* 1.1* 1.1* 9.* 9.*.*.* pt. outriggers down 1.1* 1.1* 13.* 13.* 1.1* 1.1* 11.* 11.* 1.* 1.* 9.* 9.* 7.1* 7.1*.*.* pt. outriggers down 1.* 1.* 1.7* 1.7* 13.* 13.* 1.* 1.* 11.* 11.* 1.3* 1.3* 9.* 9.*..*.*.* 1.. pt. outriggers down 1.* 1.* 19.3* 19.3* 1.* 1.* 1.3* 1.3* 1.7* 1.7* 11.* 11.* 1.* 1.* 9.* 9.*.3.*.*.* 1.9. pt. outriggers down.*.*.*.* 17.* 17.* 1.* 1.* 13.* 13.* 11.* 11.* 1.* 1.* 9. 9.*..*.7*.7* pt. outriggers down 7.* 7.* 1.* 1.* 17.9* 17.9* 1.3* 1.3* 13.3* 13.3* 11.* 11.* 1.* 1.* *..*.*.* pt. outriggers down 17.* 17.*.*.* 1.* 1.* 1.* 1.* 13.* 13.* 11.9* 11.9* 1.* 1.* * 7.9.1*.9*.9* 19. pt. outriggers down 11.1* 11.1*.7*.7* 1.* 1.* 1.7* 1.7* 13.* 13.* 11.* 11.* *.9 9.* 7.* 7.*.*.* pt. outriggers down 1.* 1.*.7*.7* 1.3* 1.3* 1.* 1.* 13.* 13.* 11.* 11.* 9.9* 9.9*.*.*.*.*.9*.9* pt. outriggers down 1.* 1.* 1.1* 1.1* 17.3* 17.3* 1.7* 1.7* 1.* 1.* 1.* 1.* 9.1* 9.1* 7.* 7.*.*.* pt. outriggers down 17.* 17.* 1.* 1.* 13.* 13.* 11.3* 11.3* 9.* 9.* 7.* 7.* 7.3* 7.3* 1. Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications
7 Attachent GA Kineatic A H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type straight ono boo 11. and industrial-type angled stick 9.. with grapple odel GMM /1.7 3 sei-closed tines Diensions H 77, kg Undercarriage 1. pt. outriggers down 1.* 1.* 1.3* 1.3* pt. outriggers down 1.3* 1.3* 1.* 1.*.*.* pt. outriggers down 13.1* 13.1* 1.* 1.* 1.* 1.* 7.9* 7.9* pt. outriggers down 1.* 1.* 11.* 11.* 1.1* 1.1* 7.* 7.* pt. outriggers down 1.7* 1.7* 11.* 11.* 1.* 1.* 9.* 9.* 7.1* 7.1* pt. outriggers down 1.7* 1.7* 11.* 11.* 1.* 1.* 9.* 9.*.*.*.*.* pt. outriggers down 1.* 1.* 1.* 1.* 11.* 11.* 1.* 1.* 9.* 9.*.9*.9*.7*.7* pt. outriggers down 1.* 1.* 13.* 13.* 11.7* 11.7* 1.* 1.* 9.* 9.*.9*.9*.*.*.*.* pt. outriggers down 1.1* 1.1* 1.* 1.* 13.3* 13.3* 11.9* 11.9* 1.7* 1.7* 9.7* 9.7*.9*.9*.*.*.*.* pt. outriggers down 1.* 1.* 17.* 17.* 1.7* 1.7* 13.7* 13.7* 1.1* 1.1* 1.* 1.* 9.* 9.* 9.* 9.*.*.*.*.*.*.* 19.. pt. outriggers down.3*.3* 19.* 19.* 1.3* 1.3* 1.1* 1.1* 1.* 1.* 11.* 11.* 9.9* 9.9* 9.* 9.*..*.9 7.3*.*.* 19.. pt. outriggers down.9*.9*.*.* 1.9* 1.9* 1.* 1.* 1.* 1.* 11.* 11.* 1.* 1.* 9.* 9.* 7.9.1*. 7.1*..7*. 3. pt. outriggers down 1.7* 1.7* 1.* 1.* 17.* 17.* 1.* 1.* 1.* 1.* 11.3* 11.3* 1.* 1.*.9 9.* 7.7.*.7.9*.*.*. 1. pt. outriggers down 7.7* 7.7* 1.* 1.* 17.7* 17.7* 1.9* 1.9* 1.9* 1.9* 11.3* 11.3* 1.* 1.*.7.9* 7. 7.*.*.*.*.*. pt. outriggers down.*.* 1.* 1.* 17.* 17.* 1.9* 1.9* 1.* 1.* 11.* 11.* 9.* 9.*..* 7.* 7.*.9*.9*.*.* pt. outriggers down.7*.7* 1.* 1.* 17.* 17.* 1.* 1.* 1.* 1.* 1.* 1.* 9.* 9.*.1*.1*.*.*.*.* pt. outriggers down 7.* 7.* 1.3* 1.3* 1.* 1.* 13.* 13.* 11.7* 11.7* 1.1* 1.1*.7*.7* 7.3* 7.3*.7*.7*.*.* 1.3. pt. outriggers down 1.7* 1.7* 13.9* 13.9* 1.1* 1.1* 1.* 1.* 9.* 9.* 7.* 7.*.*.* 1. Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 7
8 Attachent GA1 Kineatic A 7 H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type straight ono boo 1. and industrial-type angled stick 9.. with grapple odel GMM /1. 3 sei-closed tines Diensions H 77,7 kg Undercarriage. pt. outriggers down. pt. outriggers down 11.9* 11.9* 11.* 11.* pt. outriggers down 13.3* 13.3* 1.* 1.* 1.* 1.* 9.* 9.* pt. outriggers down 1.9* 1.9* 11.* 11.* 1.* 1.*.*.* pt. outriggers down 13.* 13.* 1.7* 1.7* 11.3* 11.3* 1.* 1.* 7.* 7.* pt. outriggers down 1.* 1.* 11.* 11.* 1.1* 1.1* 9.3* 9.3* 7.* 7.* pt. outriggers down 1.* 1.* 11.* 11.* 1.1* 1.1* 9.* 9.*.*.*.9*.9* pt. outriggers down 1.3* 1.3* 1.* 1.* 11.* 11.* 1.1* 1.1* 9.* 9.*.*.* 7.* 7.*.7*.7* pt. outriggers down 1.* 1.* 1.7* 1.7* 11.3* 11.3* 1.1* 1.1* 9.* 9.*.*.* 7.7* 7.7*.*.* pt. outriggers down 1.9* 1.9* 1.9* 1.9* 11.* 11.* 1.* 1.* 9.3* 9.3*.*.* 7.7* 7.7*.9 7.*.*.* pt. outriggers down 1.3* 1.3* 1.* 1.* 13.* 13.* 11.* 11.* 1.3* 1.3* 9.3* 9.3*.*.* 7.7* 7.7*.9 7.*..*. 7. pt. outriggers down 1.* 1.* 1.* 1.* 1.7* 1.7* 13.* 13.* 11.* 11.* 1.* 1.* 9.* 9.*.*.* 7.7* 7.7*. 7.*.1.*.. pt. outriggers down.7*.7* 19.* 19.* 1.1* 1.1* 13.7* 13.7* 1.* 1.* 1.* 1.* 9.* 9.*.*.* 7.7* 7.7*.7.9*.9.1*.. pt. outriggers down 1.* 1.*.1*.1* 1.* 1.* 1.* 1.* 1.1* 1.1* 1.7* 1.7* 9.* 9.*.*.* *..*.7.* pt. outriggers down.*.*.*.* 1.* 1.* 1.* 1.* 1.* 1.* 1.7* 1.7* 9.* 9.*.*.* 7. 7.*..7*.*.*.*.* pt. outriggers down 3.7* 3.7* 1.7* 1.7* 1.* 1.* 1.* 1.* 1.* 1.* 1.7* 1.7* 9.* 9.*..3* 7. 7.*.3.*.1*.1*.9 pt. outriggers down 3.9* 3.9*.*.* 1.* 1.* 13.9* 13.9* 1.* 1.* 1.* 1.* 9.* 9.*..1* *.*.*.7*.7*. 1. pt. outriggers down.*.*.*.* 1.* 1.* 13.3* 13.3* 11.* 11.* 1.* 1.*.*.* 7.* 7.*.*.*.3*.3*.*.*. 3. pt. outriggers down.*.* 1.1* 1.1* 1.3* 1.3* 1.7* 1.7* 9.* 9.*.1*.1* 7.* 7.*.*.*.*.* pt. outriggers down 1.1* 1.1* 1.* 1.* 9.* 9.*.3*.3* 7.1* 7.1*.9*.9*.*.* 17.. pt. outriggers down Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications
9 Attachent GA Kineatic A H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type straight ono boo 1. and industrial-type angled stick 1.. with grapple odel GMM /1. 3 sei-closed tines Diensions H7 7, kg Undercarriage. pt. outriggers down 1.3* 1.3* 11.* 11.*.. pt. outriggers down 1.* 1.*.*.* pt. outriggers down 11.* 11.* 1.* 1.*.*.* 7.7* 7.7* pt. outriggers down 11.* 11.* 1.* 1.*.7*.7* 7.* 7.* pt. outriggers down 11.7* 11.7* 1.9* 1.9* 9.9* 9.9*.*.*.*.* pt. outriggers down 1.* 1.* 1.* 1.* 9.* 9.*.9*.9* 7.9* 7.9*.*.* pt. outriggers down 1.1* 1.1* 1.* 1.* 9.7* 9.7*.9*.9*.1*.1* 7.* 7.*.*.* pt. outriggers down 1.* 1.* 1.* 1.* 9.7* 9.7*.9*.9*.1*.1* 7.* 7.*.*.* pt. outriggers down 1.3* 1.3* 1.9* 1.9* 9.* 9.*.9*.9*.1*.1* 7.* 7.*.9*.9*.7*.7*.1 1. pt. outriggers down 13.1* 13.1* 1.* 1.* 11.* 11.* 9.9* 9.9*.9*.9*.1*.1* 7.* 7.*.9*.9*.*.*.7 9. pt. outriggers down 1.3* 1.3* 1.7* 1.7* 11.* 11.* 1.* 1.* 9.* 9.*.*.* 7.* 7.*.*.*.9.*.*.* pt. outriggers down 1.* 1.* 1.9* 1.9* 1.1* 1.1* 13.* 13.* 11.* 11.* 1.1* 1.1* 9.1* 9.1*.*.* 7.* 7.*.*.*.9.*..* 1.. pt. outriggers down 1.9* 1.9* 1.7* 1.7* 1.* 1.* 13.3* 13.3* 11.* 11.* 1.3* 1.3* 9.* 9.*.3*.3* 7.* 7.*.7.*..1*..* 1.. pt. outriggers down.*.* 19.* 19.* 1.* 1.* 13.* 13.* 11.* 11.* 1.* 1.* 9.* 9.*.3*.3* 7.* 7.*..*.7.*..* pt. outriggers down 1.* 1.*.*.* 1.* 1.* 13.* 13.* 11.9* 11.9* 1.* 1.* 9.3* 9.3*.3*.3* 7. 7.*..*..*.1*.1*. 1. pt. outriggers down.*.* 1.9* 1.9* 1.* 1.* 13.9* 13.9* 1.* 1.* 1.* 1.* 9.* 9.*.*.* *.3.*..*.7*.7* 1.9 pt. outriggers down.*.* 1.* 1.* 1.* 1.* 13.* 13.* 11.9* 11.9* 1.* 1.* 9.1* 9.1*..1* *.1.*.1*.1*.*.* pt. outriggers down.*.* 9.1* 9.1* 1.9* 1.9* 13.* 13.* 11.* 11.* 1.1* 1.1*.*.* 7.* 7.*.7*.7*.7*.7*.*.* 3.9* 3.9* pt. outriggers down.*.*.9*.9* 1.9* 1.9* 1.* 1.* 11.* 11.* 9.* 9.*.*.* 7.* 7.*.*.*.*.*.*.*.. pt. outriggers down 9.* 9.* 13.3* 13.3* 11.* 11.* 1.1* 1.1*.*.* 7.* 7.*.*.*.3*.3*.*.* pt. outriggers down 11.* 11.* 9.9* 9.9*.7*.7* 7.* 7.*.*.*.3*.3*.*.* 1. Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 9
10 Attachent AG19 Kineatic D H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions H7 77, kg Undercarriage 19. pt. outriggers down 9.* 9.*.7 1. pt. outriggers down 9.1* 9.1*.*.* pt. outriggers down 1.9* 1.9* 9.* 9.* 7.* 7.* pt. outriggers down 1.* 1.* 1.* 1.*.*.* 7.* 7.* pt. outriggers down 1.7* 1.7* 9.9* 9.9* 9.3* 9.3* 7.* 7.*.*.* pt. outriggers down 1.* 1.* 1.* 1.* 9.3* 9.3*.*.*.*.* pt. outriggers down 11.* 11.* 1.1* 1.1* 9.* 9.*.9*.9*.1*.1*.*.* pt. outriggers down 11.3* 11.3* 1.* 1.* 9.* 9.* 9.* 9.*.*.*.*.* pt. outriggers down 13.* 13.* 11.* 11.* 1.7* 1.7* 9.* 9.* 9.1* 9.1*.*.*.9*.9*.*.* 1.1. pt. outriggers down 1.3* 1.3* 1.* 1.* 1.* 1.* 11.1* 11.1* 1.1* 1.1* 9.* 9.*.7*.7*.*.*.7*.7* 1.. pt. outriggers down 1.9* 1.9* 17.7* 17.7* 1.* 1.* 13.* 13.* 11.* 11.* 1.* 1.* 9.* 9.*.9*.9*.3*.3*.9*.9* pt. outriggers down.3*.3* 19.* 19.* 1.9* 1.9* 13.7* 13.7* 1.1* 1.1* 1.* 1.* 9.* 9.* 9.* 9.*.1.3* 7.1* 7.1* pt. outriggers down.3*.3*.*.* 1.* 1.* 1.3* 1.3* 1.* 1.* 11.1* 11.1* 1.* 1.* 9.1* 9.1*..3* 7.* 7.* 1. pt. outriggers down 13.* 13.* 1.* 1.* 17.* 17.* 1.* 1.* 1.9* 1.9* 11.* 11.* 1.* 1.* 9. 9.* 7..* 7. 7.* pt. outriggers down 11.* 11.*.*.* 1.* 1.* 1.* 1.* 13.1* 13.1* 11.* 11.* 1. 1.*. 9.1* * pt. outriggers down 11.* 11.* 19.3* 19.3* 1.* 1.* 1.* 1.* 13.1* 13.1* 11.* 11.* *.7.* 7.* 7.* 17.. pt. outriggers down 11.7* 11.7* 1.* 1.* 17.* 17.* 1.9* 1.9* 1.* 1.* 11.1* 11.1* 9.* 9.*.*.* 7.* 7.* 1.9. pt. outriggers down 1.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 1.*.*.*.3*.3* pt. outriggers down Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. 1 LH M Litronic Machine for Industrial Applications
11 Attachent AG19 Kineatic C H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions H 77, kg Undercarriage 1. pt. outriggers down.*.* pt. outriggers down 9.* 9.* 7.* 7.* pt. outriggers down.*.* 7.* 7.* pt. outriggers down.*.* 7.* 7.*.*.* pt. outriggers down.*.*.1*.1*.*.* pt. outriggers down.*.*.*.* 7.9* 7.9*.*.* pt. outriggers down 9.* 9.*.*.*.3*.3* 7.9* 7.9*.*.* pt. outriggers down 1.7* 1.7* 9.* 9.* 9.* 9.*.*.*.*.*.9*.9*.*.* 1.1. pt. outriggers down 1.7* 1.7* 11.3* 11.3* 1.* 1.* 9.* 9.*.7*.7*.*.* 7.* 7.*.7*.7* 1.. pt. outriggers down 19.9* 19.9* 1.* 1.* 13.7* 13.7* 1.* 1.* 1.7* 1.7* 9.* 9.* 9.* 9.*.*.* 7.9* 7.9*.9*.9* pt. outriggers down.*.* 17.* 17.* 1.* 1.* 1.7* 1.7* 11.3* 11.3* 1.* 1.* 9.3* 9.3*.*.*.*.* 7.1* 7.1* pt. outriggers down.3*.3* 19.3* 19.3* 1.* 1.* 13.* 13.* 11.* 11.* 1.* 1.* 9.* 9.*.*.*..1* 7.* 7.* 1. pt. outriggers down 13.* 13.*.*.* 1.7* 1.7* 1.1* 1.1* 1.3* 1.3* 1.9* 1.9* 9.* 9.*.9*.9* 7..1* 7. 7.* pt. outriggers down 11.* 11.* 1.3* 1.3* 17.* 17.* 1.* 1.* 1.7* 1.7* 11.* 11.* 1.* 1.*. 9.* * pt. outriggers down 11.* 11.* 19.3* 19.3* 17.* 17.* 1.9* 1.9* 1.* 1.* 11.3* 11.3* 1.* 1.*.7.* 7.9* 7.9* 17.. pt. outriggers down 11.7* 11.7* 1.* 1.* 17.* 17.* 1.* 1.* 1.7* 1.7* 11.1* 11.1* 9.7* 9.7*.*.* 7.* 7.* 1.9. pt. outriggers down 1.* 1.* 1.* 1.* 1.7* 1.7* 1.* 1.* 1.* 1.* 1.* 1.*.9*.9* 7.* 7.* pt. outriggers down 13.* 13.* 17.* 17.* 1.1* 1.1* 1.9* 1.9* 11.* 11.* 9.* 9.* 7.3* 7.3* 7.* 7.* pt. outriggers down 1.7* 1.7* 9.9* 9.9* 11.1 Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 11
12 Attachent AG Kineatic D 7 H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 11. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions H7 77,9 kg Undercarriage 19. pt. outriggers down.*.*.*.* pt. outriggers down 1.* 1.*.7*.7* 7.* 7.* pt. outriggers down 1.7* 1.7* 9.* 9.*.*.* 7.1* 7.1* pt. outriggers down 9.7* 9.7*.9*.9*.*.*.9*.9* pt. outriggers down 9.* 9.*.9*.9*.3*.3*.9*.9*.7*.7* pt. outriggers down 1.7* 1.7* 9.7* 9.7* 9.* 9.*.3*.3* 7.* 7.*.*.* pt. outriggers down 1.9* 1.9* 9.9* 9.9* 9.1* 9.1*.*.* 7.9* 7.9*.9*.9*.*.* pt. outriggers down 1.7* 1.7* 11.3* 11.3* 1.1* 1.1* 9.* 9.*.*.* 7.9* 7.9* 7.* 7.*.*.* pt. outriggers down 1.* 1.* 13.3* 13.3* 11.7* 11.7* 1.* 1.* 9.* 9.*.7*.7*.*.* 7.* 7.*.*.* pt. outriggers down.*.* 1.7* 1.7* 1.1* 1.1* 1.* 1.* 1.* 1.* 9.7* 9.7*.9*.9*.*.* 7.* 7.*.7*.7* 19.. pt. outriggers down.*.* 17.9* 17.9* 1.* 1.* 1.7* 1.7* 11.* 11.* 1.* 1.* 9.1* 9.1*.3*.3* 7.7* 7.7*.9 7.*.9.9* pt. outriggers down 1.1* 1.1* 19.* 19.* 1.* 1.* 13.3* 13.3* 11.* 11.* 1.3* 1.3* 9.3* 9.3*.*.* 7.7* 7.7*. 7.1*.7 7.* pt. outriggers down 1.* 1.*.*.* 1.3* 1.3* 13.7* 13.7* 11.9* 11.9* 1.* 1.* 9.* 9.*.*.* 7. 7.*.7 7.* 19. pt. outriggers down.*.* 17.1* 17.1* 1.* 1.* 1.1* 1.1* 1.* 1.* 1.7* 1.7* 9.* 9.*..* *.7 7.* pt. outriggers down.*.* 1.* 1.* 17.* 17.* 1.3* 1.3* 1.3* 1.3* 1.* 1.* 9.* 9.*..* *..9* pt. outriggers down.*.* 13.* 13.* 1.* 1.* 1.* 1.* 1.3* 1.3* 1.7* 1.7* 9.* 9.*..3* 7.* 7.*.7*.7* 1.. pt. outriggers down 9.* 9.* 13.* 13.* 1.* 1.* 13.* 13.* 11.9* 11.9* 1.* 1.* 9.* 9.* 7.* 7.*.*.* 1.. pt. outriggers down 1.* 1.* 1.* 1.* 1.9* 1.9* 11.* 11.* 9.7* 9.7*.3*.3*.9*.9* pt. outriggers down Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. 1 LH M Litronic Machine for Industrial Applications
13 Attachent AG Kineatic C H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 11. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions H 77,9 kg Undercarriage 1. pt. outriggers down.7*.7* 7.* 7.* pt. outriggers down.*.* 7.1* 7.1* pt. outriggers down.1*.1* 7.7* 7.7*.9*.9* pt. outriggers down.*.* 7.* 7.*.9*.9*.7*.7* pt. outriggers down.1*.1* 7.* 7.* 7.* 7.*.*.* pt. outriggers down.9*.9*.*.* 7.7* 7.7* 7.3* 7.3*.9*.9*.*.* pt. outriggers down 9.* 9.*.*.* 7.* 7.* 7.* 7.* 7.* 7.*.*.* pt. outriggers down 1.* 1.* 9.* 9.*.7*.7*.*.* 7.* 7.* 7.1* 7.1*.*.* pt. outriggers down 1.* 1.* 11.1* 11.1* 9.9* 9.9* 9.* 9.*.*.* 7.* 7.* 7.* 7.*.7*.7* 19.. pt. outriggers down.7*.7* 1.* 1.* 13.* 13.* 11.7* 11.7* 1.3* 1.3* 9.3* 9.3*.*.* 7.* 7.* 7.3* 7.3*.*.*.*.* pt. outriggers down 1.1* 1.1* 17.7* 17.7* 1.* 1.* 1.* 1.* 1.* 1.* 9.* 9.*.7*.7*.*.* 7.* 7.*..9*.7.9* pt. outriggers down 1.* 1.* 1.* 1.* 1.3* 1.3* 1.9* 1.9* 11.* 11.* 1.* 1.* 9.* 9.*.*.* 7.* 7.*.7.9* 19. pt. outriggers down.*.* 17.1* 17.1* 1.* 1.* 13.* 13.* 11.* 11.* 1.3* 1.3* 9.* 9.*.3*.3* 7. 7.*.7.9* pt. outriggers down.*.* 1.* 1.* 1.* 1.* 13.* 13.* 11.9* 11.9* 1.* 1.* 9.3* 9.3*.*.* *..9* pt. outriggers down.*.* 13.* 13.* 1.* 1.* 13.9* 13.9* 1.* 1.* 1.* 1.* 9.3* 9.3*..3* 7.3* 7.3*.*.* 1.. pt. outriggers down 9.* 9.* 13.* 13.* 1.* 1.* 13.7* 13.7* 11.* 11.* 1.3* 1.3* 9.1* 9.1* 7.9* 7.9*.7*.7* 1.. pt. outriggers down 1.* 1.* 1.* 1.* 1.* 1.* 13.1* 13.1* 11.* 11.* 9.9* 9.9*.*.* 7.* 7.*.*.* pt. outriggers down 1.9* 1.9* 1.9* 1.9* 13.9* 13.9* 1.* 1.* 1.* 1.*.9*.9* 7.* 7.*.*.* pt. outriggers down 11.7* 11.7* 1.* 1.*.7*.7* 7.3* 7.3* 7.1* 7.1* 13.7 Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 13
14 Attachent AG1 Kineatic D H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions 17 7 H 7, kg Undercarriage 1. pt. outriggers down 1.* 1.*.7*.7* pt. outriggers down 1.* 1.*.3*.3* 7.* 7.* pt. outriggers down 1.* 1.* 9.* 9.*.3*.3* 7.3* 7.3* pt. outriggers down 9.* 9.*.*.*.*.* 7.* 7.* pt. outriggers down 9.* 9.*.*.* 7.9* 7.9* 7.* 7.*.7*.7* pt. outriggers down 1.* 1.* 9.* 9.*.*.* 7.9* 7.9* 7.3* 7.3*.*.* pt. outriggers down 1.7* 1.7* 9.* 9.*.*.* 7.9* 7.9* 7.3* 7.3*.9*.9*.*.* pt. outriggers down 1.9* 1.9* 9.7* 9.7*.*.*.*.* 7.* 7.*.9*.9*.*.* pt. outriggers down 1.9* 1.9* 11.* 11.* 9.9* 9.9*.9*.9*.1*.1* 7.* 7.*.9*.9*.*.*.*.* pt. outriggers down 19.* 19.* 1.9* 1.9* 13.* 13.* 11.* 11.* 1.* 1.* 9.1* 9.1*.3*.3* 7.* 7.* 7.* 7.*.*.*.3*.3*.1. pt. outriggers down 1.* 1.* 1.* 1.* 13.9* 13.9* 11.9* 11.9* 1.* 1.* 9.3* 9.3*.*.* 7.7* 7.7* 7.1* 7.1*.*.*..3*.3. pt. outriggers down.*.* 17.7* 17.7* 1.* 1.* 1.* 1.* 1.* 1.* 9.* 9.*.*.* 7.* 7.* 7.1* 7.1*.*.*..*. 3. pt. outriggers down.1*.1* 1.* 1.* 1.1* 1.1* 1.* 1.* 11.1* 11.1* 9.* 9.*.7*.7* 7.9* 7.9* 7.* 7.*..*.9.*. 1. pt. outriggers down.*.* 13.3* 13.3* 1.* 1.* 13.1* 13.1* 11.3* 11.3* 9.9* 9.9*.9*.9*.*.* 7.* 7.*.3.*..1*. pt. outriggers down.*.* 1.* 1.* 1.9* 1.9* 13.3* 13.3* 11.* 11.* 1.1* 1.1*.9*.9*.*.* *..*..*.3 1. pt. outriggers down.*.* 9.* 9.* 1.9* 1.9* 13.* 13.* 11.* 11.* 1.1* 1.1*.9*.9* 7.9.*.9 7.1*.1.*.9.9*. 3. pt. outriggers down.7*.7* 9.9* 9.9* 1.* 1.* 13.* 13.* 11.* 11.* 9.9* 9.9*.*.* *..*.*.*.*.* 19.. pt. outriggers down 7.* 7.* 1.* 1.* 1.7* 1.7* 1.7* 1.7* 11.* 11.* 9.* 9.*.*.* 7.* 7.*.3*.3*.*.* 19.. pt. outriggers down 13.* 13.* 11.* 11.* 1.3* 1.3* 9.* 9.* 7.* 7.*.7*.7*.7*.7* pt. outriggers down 9.1* 9.1* 7.9* 7.9* 7.* 7.* 13.7 Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. 1 LH M Litronic Machine for Industrial Applications
15 Attachent AG1 Kineatic C H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions 17 7 H 7, kg Undercarriage 19. pt. outriggers down.3*.3* 7.* 7.* pt. outriggers down 7.9* 7.9* 7.3* 7.3* pt. outriggers down 7.7* 7.7* 7.* 7.* 7.* 7.* pt. outriggers down 7.7* 7.7* 7.* 7.*.*.*.7*.7* pt. outriggers down 7.7* 7.7* 7.* 7.*.7*.7*.*.* pt. outriggers down 7.* 7.* 7.* 7.*.7*.7*.*.*.3*.3* pt. outriggers down.7*.7* 7.9* 7.9* 7.3* 7.3*.*.*.*.*.1*.1* pt. outriggers down 9.* 9.*.1*.1* 7.* 7.*.9*.9*.*.*.1*.1*.1*.1* pt. outriggers down 1.* 1.* 1.* 1.* 9.* 9.*.3*.3* 7.* 7.* 7.* 7.*.*.*.1*.1*.*.*.1. pt. outriggers down 19.* 19.* 1.3* 1.3* 1.7* 1.7* 1.9* 1.9* 9.* 9.*.*.* 7.* 7.* 7.1* 7.1*.*.*.*.*.*.*.3. pt. outriggers down 1.* 1.* 1.3* 1.3* 13.* 13.* 11.* 11.* 9.9* 9.9*.*.*.*.* 7.3* 7.3*.7*.7*.3*.3*.*.*. 3. pt. outriggers down.1*.1* 17.* 17.* 1.1* 1.1* 11.9* 11.9* 1.3* 1.3* 9.1* 9.1*.*.* 7.* 7.*.9*.9*.3*.3*.9.*. 1. pt. outriggers down.*.* 13.3* 13.3* 1.7* 1.7* 1.* 1.* 1.7* 1.7* 9.* 9.*.*.* 7.* 7.*.9*.9*.3.*..*. pt. outriggers down.*.* 1.* 1.* 1.* 1.* 1.7* 1.7* 1.9* 1.9* 9.* 9.*.*.* 7.7* 7.7* 7.* 7.*..3*..*.3 1. pt. outriggers down.*.* 9.* 9.* 1.* 1.* 1.9* 1.9* 11.1* 11.1* 9.7* 9.7*.*.* 7.7* 7.7*.9 7.*.1.*.9.*. 3. pt. outriggers down.7*.7* 9.9* 9.9* 1.3* 1.3* 1.9* 1.9* 11.* 11.* 9.* 9.*.*.* 7.7* 7.7*..*.9*.9*.9*.9* 19.. pt. outriggers down 7.* 7.* 1.* 1.* 1.9* 1.9* 1.7* 1.7* 11.* 11.* 9.* 9.*.*.* 7.* 7.*.*.*.*.* 19.. pt. outriggers down.3*.3* 11.* 11.* 1.* 1.* 1.* 1.* 1.* 1.* 9.1* 9.1*.*.*.9*.9*.*.*.*.* pt. outriggers down 11.9* 11.9* 1.* 1.* 11.* 11.* 9.* 9.*.*.* 7.* 7.*.*.*.1*.1* pt. outriggers down 1.* 1.* 9.* 9.*.*.* 7.1* 7.1*.9*.9*.*.* 1. Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 1
16 Attachent AG Kineatic D H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 1.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions H 7,9 kg Undercarriage. pt. outriggers down.*.* pt. outriggers down.7*.7* 7.3* 7.3* pt. outriggers down.*.* 7.* 7.*.*.* pt. outriggers down 9.1* 9.1*.3*.3*.9*.9*.*.* pt. outriggers down 9.* 9.*.*.* 7.* 7.*.*.*.*.* pt. outriggers down 9.* 9.*.1*.1* 7.* 7.* 7.* 7.*.*.* pt. outriggers down 9.* 9.*.*.* 7.* 7.*.9*.9*.*.*.7*.7* pt. outriggers down 9.1* 9.1*.*.* 7.* 7.* 7.* 7.*.*.*.7*.7*.*.* pt. outriggers down 1.* 1.* 9.3* 9.3*.3*.3* 7.* 7.* 7.* 7.*.*.*.1*.1*.*.*.1 9. pt. outriggers down 1.7* 1.7* 9.* 9.*.*.* 7.7* 7.7* 7.1* 7.1*.*.*.1*.1*.7*.7*. 7. pt. outriggers down 1.7* 1.7* 11.* 11.* 9.7* 9.7*.7*.7* 7.9* 7.9* 7.* 7.*.*.*.*.*.7*.7* 1.. pt. outriggers down 19.9* 19.9* 1.9* 1.9* 13.3* 13.3* 11.* 11.* 1.* 1.*.9*.9*.*.* 7.3* 7.3*.7*.7*.*.*.*.*.7.7* 1.. pt. outriggers down 1.* 1.* 1.* 1.* 13.* 13.* 11.* 11.* 1.3* 1.3* 9.1* 9.1*.*.* 7.* 7.*.*.*.3*.3*.7.*..7* pt. outriggers down 1.* 1.* 17.7* 17.7* 1.* 1.* 1.* 1.* 1.* 1.* 9.3* 9.3*.3*.3* 7.* 7.*.9*.9*.3*.3*..*..* pt. outriggers down 7.9* 7.9* 1.* 1.* 1.9* 1.9* 1.* 1.* 1.* 1.* 9.* 9.*.*.* 7.* 7.*.9*.9*.3.3*..7*.3.* 1. pt. outriggers down.*.* 1.7* 1.7* 1.3* 1.3* 1.* 1.* 11.* 11.* 9.7* 9.7*.*.* 7.7* 7.7* 7.* 7.*.1.3*..*.3.* pt. outriggers down.3*.3* 1.7* 1.7* 1.* 1.* 13.* 13.* 11.* 11.* 9.* 9.*.*.* 7.7* 7.7*..9*..*.3.*.9 3. pt. outriggers down.*.* 1.1* 1.1* 1.* 1.* 13.* 13.* 11.1* 11.1* 9.7* 9.7*.*.* 7. 7.*..*.9.9*.3*.3*.. pt. outriggers down 7.* 7.* 1.* 1.* 1.9* 1.9* 1.7* 1.7* 1.9* 1.9* 9.* 9.*.*.* 7.* 7.*.*.*.*.*.1*.1*.. pt. outriggers down 7.* 7.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 9.1* 9.1*.*.*.9*.9*.9*.9*.9*.9* pt. outriggers down 1.* 1.* 11.* 11.* 9.* 9.*.3*.3* 7.* 7.*.1*.1*.7*.7* 17.1 Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. 1 LH M Litronic Machine for Industrial Applications
17 Attachent AG Kineatic C H The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 1.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions H9 7,9 kg Undercarriage 19. pt. outriggers down 7.* 7.*.*.* pt. outriggers down.9*.9*.*.* pt. outriggers down.*.*.*.*.*.* pt. outriggers down.7*.7*.3*.3*.*.* pt. outriggers down.7*.7*.3*.3*.9*.9*.7*.7* pt. outriggers down.*.*.3*.3*.9*.9*.*.*.*.* pt. outriggers down 7.* 7.*.9*.9*.*.*.*.*.7*.7*.*.*.1 9. pt. outriggers down.*.* 7.* 7.* 7.* 7.*.*.*.*.*.7*.7*.*.*. 7. pt. outriggers down.7*.7* 7.9* 7.9* 7.* 7.*.*.*.1*.1*.7*.7*.*.* 1.. pt. outriggers down 11.9* 11.9* 1.3* 1.3* 9.* 9.*.1*.1* 7.3* 7.3*.7*.7*.*.*.*.*.*.*.*.* 1.. pt. outriggers down 19.* 19.* 1.3* 1.3* 1.* 1.* 1.* 1.* 9.* 9.*.*.* 7.* 7.*.9*.9*.*.*.9*.9*.*.*.*.* pt. outriggers down 1.* 1.* 1.3* 1.3* 13.3* 13.3* 11.* 11.* 9.* 9.*.*.* 7.* 7.* 7.1* 7.1*.*.*.*.*.*.*..* pt. outriggers down 7.9* 7.9* 17.* 17.* 13.9* 13.9* 11.7* 11.7* 1.1* 1.1*.9*.9*.*.* 7.* 7.*.*.*.1*.1*..*.3.* 1. pt. outriggers down.*.* 1.7* 1.7* 1.* 1.* 1.1* 1.1* 1.* 1.* 9.* 9.*.1*.1* 7.3* 7.3*.7*.7*.1*.1*..*.3.* pt. outriggers down.3*.3* 1.7* 1.7* 1.9* 1.9* 1.* 1.* 1.7* 1.7* 9.3* 9.3*.3*.3* 7.* 7.*.7*.7*..1*.3.*.9 3. pt. outriggers down.*.* 1.1* 1.1* 1.* 1.* 1.* 1.* 1.* 1.* 9.* 9.*.3*.3* 7.* 7.*..7*.9.9*.*.*.. pt. outriggers down 7.* 7.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 9.* 9.*.3*.3* 7.3* 7.3*.*.*.*.*.3*.3*.. pt. outriggers down 7.* 7.* 1.* 1.* 1.* 1.* 1.1* 1.1* 1.* 1.* 9.1* 9.1*.*.* 7.* 7.*.1*.1*.*.* pt. outriggers down.*.* 11.* 11.* 13.* 13.* 11.* 11.* 9.9* 9.9*.*.* 7.* 7.*.*.*.3*.3*.9*.9* pt. outriggers down 1.* 1.* 11.* 11.* 1.1* 1.1*.*.* 7.7* 7.7*.*.*.*.*.*.* pt. outriggers down.3*.3* 7.3* 7.3*.*.*.9*.9* 13.9 Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 17
18 Kineatic Variants Kineatic Variant A Hole A A H Hole Energy recovery with kineatic variant A Kineatic Variant D/C Hole D D Hole C C Hole H Hole H7 Energy recovery with kineatic variant D Energy recovery with kineatic variant C D H7 C H71 Altered range curve with additional reach depth, e.g. for unloading fro ships 1 LH M Litronic Machine for Industrial Applications
19 Variety of Tools Shells for Loose Material Shells for loose aterial with cutting edge (without teeth) Clashell odel GMZ (direct attached, two-otor, single-piece, protective device echanic, XHD suspension) Cutting width of shells 1,3 1, 1,7, Capacity For loose aterial, specific weight up to t/ Weight kg,1,3,77,9 Multiple Tine Grapples Grapple odel GMM, tines (direct attached, two-otor, single-piece, XHD suspension) open sei-closed closed Capacity Weight kg 1,9 1,93 1,99,9,1,1,3 Grapple odel GMM, tines (direct attached, two-otor, single-piece, XHD suspension) open sei-closed closed Capacity Weight kg,17,,9,39,,,,,7 Wood Grapple Grapple odel GMH (direct attached, XHD suspension reinforced, 3, plug-in coupling, two-otor, so start) Claw width Size Height of grapple, closed 3, 3,77 3, Weight kg,1,3, Load Li Hook Load li hook for industrial stick (direct attached, XHD suspension) Max. load t Height with suspension 1, Weight kg Magnet Devices/Liing Magnets Generator kw 3 Electroagnets with suspension (direct attached) Power kw Diaeter of agnet 1, 1,7 Weight kg, 3,3 LH M Litronic Machine for Industrial Applications 19
20 Liebherr ERC-Syste Efficiency as standard ERC Syste More perforance, less consuption Lowering the equipent stores energy in the ERC syste. This stored energy is then ade available to the achine to provide additional engine power. When the equipent is raised the stored energy is released and is reflected in powerful, hoogeneous operating cycles. The result is a clear saving on fuel and, at the sae tie, even greater perforance. 1. Attachent fitting raised / Energy released B. Lower attachent fitting / Store energy. Raise attachent fitting / Release energy 3. Attachent fitting lowered / Energy stored A B A Syste power increased overall power ERC-Syste Engine ERC fuel savings of up to 3 % lower running costs reduced pollutant and noise eissions Power [kw] Syste power The energy recovery cylinder is a storage syste which is independent of the diesel engine. The syste perforance of aterial handling achines fitted with the ERC syste is coposed of the installed engine power and the energy recovery cylinder. When the equipent is raised, energy fro the ERC syste is supplied in addition to the power fro the diesel engine. A ERC perforance Boo position Engine power B Syste perforance LH M Litronic Machine for Industrial Applications
Machine for Industrial Applications LH 26 M
Machine for Industrial Applications LH 26 M litronic` Operating Weight: 2,3 26, kg Engine: kw / 1 HP Stage IIIB Technical Data Engine Rating per ISO 9249 Model Type Bore/Stroke Displaceent Engine operation
More informationMachine for Industrial Applications LH 24 M
Machine for Industrial Applications LH 24 M litronic` Operating Weight: 23,8 24,3 kg Engine: kw / 43 HP Stage IIIB Technical Data Engine Rating per ISO 9249 Model Type Bore/Stroke Displaceent Engine operation
More informationLH 40 Port LH 50 Port
Material Handling Machines LH Port LH Port litronic` litronic` Operating Weight 1,,7 kg * Engine 1 kw / 11 HP Stage IV Stage IIIA Syste Perforance 33 kw * without working tool Technical Data Diesel Engine
More informationlitronic` Timber Operating Weight: 29,300 kg Engine Output: 140 kw / 190 HP
Log Loader LH 35 M litronic` Timber Operating Weight: 29,300 kg Engine Output: 140 kw / 190 HP Technical Data Engine Rating per ISO 9249 140 kw (190 HP) at 1,800 RPM Model Liebherr D934 according to stage
More informationlitronic` Timber Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249): 190 HP / 140 kw
Log Loader LH 35 M litronic` Timber Operating Weight: 64,600 lb Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249): 190 HP / 140 kw Technical Data Engine Rating per SAE J1349 188 HP (140
More informationlitronic` Timber Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw
Log Loader LH 50 M litronic` Timber Operating Weight: 82,100 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw Technical Data Engine Rating per SAE J1349 201 HP (150
More informationCrawler Excavator R 918 Compact
Crawler Excavator R 918 Copact Preliinary Version Motor: 1 kw / 136 HP Stage IV / Tier 4f Operating Weight: 18,75 21,3 kg Bucket Capacity:.3.95 3 Long live progress with the R 918 Copact Very cofortable
More informationMachine for Industrial Applications LH 22 M
Machine for Industrial Applications LH 22 M litronic` Operating Weight: 48,7, lb Engine: 34 HP / kw Stage Tier 3 Technical Data Engine Rating per SAE J349 34 HP ( kw) at,8 rpm Model Liebherr D834 Type
More informationWheeled Excavator A 912 Compact
Wheeled Excavator A 91 Copact litronic` Operating Weight: 1,700 1,900 kg Engine: 90 kw / 1 HP Stage IV Bucket Capacit: 0.1 Technical Data Diesel Engine Rating per ISO 99 Model Tpe Bore / Stroke Displaceent
More informationLH 120 M. Machine for Industrial Applications
Machine for Industrial Applications LH 1 M litronic` Operating Weight: 308,450 336,0 lb Engine Output (SAE J1349): 536 HP / 400 kw Engine Output (ISO 9249): 543 HP / 400 kw Technical Data Engine Rating
More informationCrawler Excavator R 914 Compact
Crawler Excavator R 9 Copact litronic` Operating Weight:,, kg Engine: 9 kw / HP Stage I Bucket Capacit:.. Technical Data Diesel Engine Rating per ISO 99 Model Tpe Bore / Stroke Displaceent Engine operation
More informationMaterial Handling Machines. LH 22 Industry. Operating Weight 19,200 22,200 kg Engine 105 kw / 143 HP Stage IV Stage IIIA
Material Handling Machines LH Industry Operating Weight,, kg Engine kw / HP Stage IV Stage IIIA LH M Industry Litronic Operating Weight,, kg* Engine kw / HP Stage IV Stage IIIA LH C Industry Litronic Operating
More informationWheeled Excavator A 900 C A 904 C
Wheeled Excavator A 9 C A 94 C Operating : 18, - 19, kg 2,4-2,6 kg Engine Output: 9 kw / 129 HP 1 kw / 143 HP Bucket Capacity:.32-1. ³. - 1.2 ³ A 9 C Operating : 18, - 19, kg Engine Output: 9 kw / 129
More informationWheeled Excavator A 920
Wheeled Excavator A 9 litronic` Operating Weight: 8,, kg Engine: 9 kw / 7 HP Stage I Bucket Capacit:.. Technical Data Diesel Engine Rating per ISO 99 Model Tpe Bore / Stroke Displaceent Engine operation
More informationLH 24 Industry LH 26 Industry
Material Handling Machines LH Industry LH Industry Operating Weight,, kg Engine kw / HP kw / HP Stage IV Perforance Power plus speed Redefined perforance Econoy Good investent Savings for long-ter LH M
More informationMaterial Handling Machine LH 110 Port. Operating Weight: 100, ,000 kg Engine: 300 kw / 408 HP Stage IV Stage IIIA System Performance: 463 kw
Material Handling Machine LH 11 Port Operating Weight: 1, 12, kg Engine: 3 kw / 48 HP Stage IV Stage IIIA System Performance: 463 kw The Perfect Solution for Every Application H85 Shells for loose material
More informationRailroader A 922 Rail. Operating Weight: 19,900 22,800 kg Engine: 110 kw / 150 HP
Railroader A 922 Rail Operating Weight: 19,900 22,800 kg Engine: 110 kw / 150 HP A 922 Rail Litronic Operating Weight: 19,900 22,800 kg Engine: 110 kw / 150 HP Perforance Copact, flexible Perfect cobination
More informationWheeled Excavator A 924 Heavy Lift
Wheeled Excavator A 9 Heav Lift litronic` Operating Weight: 6, 8, kg Engine: 6 kw / 7 HP Stage I Bucket Capacit:.7.7 Technical Data Diesel Engine Rating per ISO 99 Model Tpe Bore / Stroke Displaceent Engine
More informationWheeled Excavator A 914
Wheeled Excavator A 9 litronic` Operating Weight:,9 7, kg Engine: kw / HP Stage I Bucket Capacit:.7.87 H Technical Data Diesel Engine Rating per ISO 99 Model Tpe Bore / Stroke Displaceent Engine operation
More informationMachine for Industrial Applications A 934 C HD
Machine for Industrial Applications A 9 C HD litronic` High Rise Operating Weight:,00 6,00 kg Engine Output: 0 kw / 0 HP Technical Data Engine Rating per ISO 99 0 kw (0 HP) at,800 RPM Model Liebherr D
More informationMachine for Industrial Applications A 944 C HD
Machine for Industrial Applications A 9 C HD litronic` Operating Weight: 57, 58,5 kg Engine Output: 19 kw / 58 HP Technical Data Engine Rating per ISO 99 19 kw (58 HP) at 1,8 RPM Model Liebherr D 936 L
More informationLH 50 M. Machine for Industrial Applications. Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249):
Machine for Industrial Applications LH M litronic` High Rise Operating Weight: 12, 13,3 lb Engine Output (SAE J1349): 188 HP / 14 kw Engine Output (ISO 9249): 19 HP / 14 kw Max. System Performance (SAE
More informationlitronic` Operating Weight: 80,350 83,000 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw
Log Loader A 934 C HD litronic` Operating Weight: 80,30 83,000 lb Engine Output (SAE J1349): 201 HP / 10 kw Engine Output (ISO 9249): 204 HP / 10 kw Technical Data Engine Rating per SAE J1349 201 HP (10
More informationA 934 C HD. Machine for Industrial Applications
Machine for Industrial Applications A 934 C HD litronic` Operating Weight: 9,7 93, lb Engine Output (SAE J1349): 21 HP / kw Engine Output (ISO 9249): 24 HP / kw Technical Data Engine Rating per SAE J1349
More informationA 934 C HD. Machine for Industrial Applications
Machine for Industrial Applications A 93 C HD litronic` High Rise Operating Weight: 100,300 10,300 lb Engine Output (SAE J139): 01 HP / 150 kw Engine Output (ISO 99): 0 HP / 150 kw Technical Data Engine
More informationMachine for Industrial Applications
Machine for Industrial Applications A 9 C litronic` Operating Weight: 8, 8, lb Engine Output: hp / kw Technical Data Engine Rating per ISO 99 hp ( kw) at 8 rpm Model Liebherr D 9 L according to level IIIA
More informationMachine for Industrial Applications A 954 C HD
Machine for Industrial Applications A 95 C HD litronic` High Rise Operating Weight: 83, 90,9 kg Engine Output: 0 kw / 36 HP Technical Data Engine Rating per ISO 99 0 kw (36 HP) at 1,800 RPM Model Liebherr
More informationCrawler excavator R 976
Crawler excavator R 976 Operating Weight with Backhoe Attachment: 85,3 95,5 kg Operating Weight with Shovel Attachment: 9,8 92,6 kg Engine Output: 4 kw / 544 P Bucket Capacity: 2. 6.6 m³ Shovel Capacity:
More informationCrawler Excavator. Operating Weight with Backhoe Attachment: 84, ,300 kg Operating Weight with Shovel Attachment: 89,400 91,200 kg
Crawler Excavator R 974 C litronic` Operating Weight with Backhoe Attachent: 84,4 11,3 kg Operating Weight with Shovel Attachent: 89,4 91,2 kg Engine Output: 4 kw / 43 P Bucket Capacity: 2,2 6,2 3 Shovel
More informationMachine for Industrial Applications
Machine for Industrial Applications A 95 C HD litronic` High Rise Operating Weight: 79,95 87,55 kg Engine Output: kw / 36 HP Technical Data Engine Rating per ISO 99 kw (36 HP) at 18 RPM Model Liebherr
More informationMachine for Industrial Applications
Machine for Industrial Applications A C litronic` Operating Weight:,, lb Engine Output: hp / kw Technical Data Engine Rating per ISO hp ( kw) at rpm Model Liebherr D S according to level IIIA / Tier Type
More informationA 944 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications
Technical Description Hydraulic Excavator A 944 B HD litronic` Machine for Industrial Applications Operating Weight 106,300 116,000 lbs Engine Output 245 HP (180 kw) Technical Data Engine Rating per ISO
More informationCrawler Excavator R 920
Crawler Excavator R 92 Operating Weight: 2,2 23,6 kg Engine Output: 15 kw / 143 HP Bucket Capacity:.55 1.15 ³ New engine output R 92 Operating Weight: 2,2 23,6 kg Engine Output: 15 kw / 143 HP Bucket Capacity:.55-1.15
More informationA 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications
Technical Description Hydraulic Excavator A 9 B litronic` Machine for Industrial Applications Operating Weight 67,7 7,98 lbs Engine Output 97 HP ( kw) Technical Data Engine Rating per ISO 99 97 HP ( kw)
More informationCrawler Excavator. Operating Weight with Backhoe Attachment: 65,700 76,900 kg Operating Weight with Shovel Attachment: 67,300 76,400 kg
Crawler Excavator R 964 C litronic` Operating Weight with Backhoe Attachent: 6,7 76,9 kg Operating Weight with Shovel Attachent: 67,3 76,4 kg Engine Output: 32 kw / 434 P Bucket Capacity: 2,, 3 Shovel
More informationMaterial Handling Machine LH 150 Port
Material Handling Machine LH 150 Port litronic` Operating Weight: 286,600 485,000 lb Engine: 536 HP / 400 kw (SAE J1349) 543 HP / 400 kw (ISO 9249) Stage Tier 4f Electro Max. System Performance: 614 kw
More informationCrawler Excavator. Operating Weight with Backhoe Attachment: 66,400 79,600 kg Operating Weight with Shovel Attachment: 68,400 78,300 kg
Crawler Excavator R 964 C litronic` Operating Weight with Backhoe Attachent: 66,4 79,6 kg Operating Weight with Shovel Attachent: 68,4 78,3 kg Engine Output: 3 kw / 434 P Bucket Capacity:.. 3 Shovel Capacity:
More informationCrawler Excavator R 956
Crawler Excavator R 956 Motor: 240 kw / 326 HP Stage IV Operating weight: Backhoe: 51,000 58,150 kg 56,750 57,300 kg Shovel: Bucket Capacity: Backhoe: 1.25 3.30 3 Shovel: 2.50 3.10 3 R 956 Litronic Motor
More informationTunneling Excavators. Product Information. Compact
Tunneling Excavators R 924 Copact R 944 C Product Inforation R 924 Copact R 944 C Litronic Operating Weight:,000-4,00 kg 4,600-44,200 kg Engine Output: 129 kw / 17 P 190 kw / 28 P Tunnel eight: 4.7-7.0.40-8.00
More informationA 954 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications
Technical Description Hydraulic Excavator A 95 B HD litronic` Machine for Industrial Applications Operating Weight 138,88 151, lbs Engine Output HP ( kw) Technical Data Engine Rating per ISO 99 HP ( kw)
More informationCrawler Excavator R 918. Operating Weight: 18,150 21,800 kg Engine Output: 85 kw / 116 HP Bucket Capacity: m³
Crawler Excavator R 918 Operating Weight: 18,15 21,8 kg Engine Output: 85 kw / 116 HP Bucket Capacity:.17.95 ³ R 918 Operating Weight: 18,15 21,8 kg Engine Output: 85 kw / 116 HP Bucket Capacity:.17.95
More informationDemolition Excavator R 960
Attachent Inforation Deolition Excavator R 9 litronic` Engine: kw / 3 P Stage I / Tier f Operating Weight: 77,3 97,7 kg Working eight: 33 /: 9 Technical Data Engine Rating per ISO 99 Torque Model Type
More informationWheeled Excavator A 916. Operating Weight: 16,800 19,000 kg Engine Output: 110 kw / 150 HP Bucket Capacity: m³
Wheeled Excavator A 96 Operating Weight: 6,8 9, kg Engine Output: kw / HP Bucket Capacity:.7. m³ A 96 Operating Weight: 6,8 9, kg Engine Output: kw / HP Bucket Capacity:.7. m³ 2 A 96 Litronic Performance
More informationMaterial Handling Machine LH 80 Industry
Material Handling Machine LH Industry Operating :, 1, kg Engine: 3 kw / 313 PS Stage IV Stage IIIA System Performance: 37 kw LH M Industry Litronic Operating : 71, 7, kg* Engine: 3 kw / 313 HP Stage IV
More informationLH 35 M Timber. Product Information Log Loader
Product Information Log Loader LH 3 M Timber Operating Weight 6,300 69,700 lb Engine kw / 201 HP (SAE J1349) kw / 204 HP (ISO 9249) Stage Tier 4f Performance Power Plus Speed Redefined Performance Economy
More informationMC Line. MC 96 Duty-cycle crane
MC Line MC 96 Duty-cycle crane Diensions basic achine 2040 450 50 2990 6040 3050 4700 000 3980 530 40 7280 020 R 4700 Operating weight 8300 with HD undercarriage,,000- triple-grouser track shoes, uppercarriage
More informationLog Loader LH 35 M Timber
Product Information Log Loader LH 35 M Timber Operating weight: 65,300-65,900 lb Engine: 150 kw / 201 HP (SAE J1349) 150 kw / 204 HP (ISO 9249) Stage Tier 4f Performance Power plus speed Redefined performance
More informationMachine for Industrial Applications A 944 C HD
Machine for Industrial Applications A 9 C HD litronic` High Rise Operating Weight: 68,690 71,780 kg Engine Output: 190 kw / 58 HP Technical Data Engine Rating per ISO 99 190 kw (58 HP) at 1,800 RPM Model
More informationMaterial Handling Machines LH 40 Industry LH 50 Industry
Material Handling Machines LH 4 Industry LH Industry Operating Weight: 36,4 43, kg Engine: 1 kw / 211 HP Stage IV Stage IIIA System Performance: 221 / 246 kw LH 4 M Litronic Industry Operating Weight:
More informationMaterial Handling Machines LH 80 Industry
Material Handling Machines LH Industry Operating Weight:,, lb Engine: 3 kw / 3 HP (SAE J139) 3 kw / 313 HP (ISO 99) Stage Tier f System Performance: 37 kw LH M Industry Litronic Operating Weight: 17,,7
More informationProduct Information Log Loader. LH 50 M Timber. Operating Weight 88,800 lb Engine 170 kw / 228 HP (SAE J1349) 170 kw / 231 HP (ISO 9249) Stage Tier 4f
Product Information Log Loader LH 50 M Timber Operating Weight 88,800 lb Engine 170 kw / 228 HP (SAE J1349) 170 kw / 231 HP (ISO 9249) Stage Tier 4f Performance Power Plus Speed Redefined Performance Economy
More informationFrame. Crane engine. Crane drive. Crane control. Hoist gear. Lufing gear. Slewing gear. Crane cab. Safety devices. Counterweight Telescopic boom
Equipent Crane carrier Frae Outriggers Engine Transission Axles Cardan shaft Suspension Tyre equipent Steering Brakes Driving cab Electrical syste Self-anufactured, torsion-resistant box-type design of
More informationTechnical Description Hydraulic Excavator A 310 B. Operating Weight 11,1 11,9 t Engine Output 58 kw (79 HP) Bucket Capacity 0,10 0,45 m 3
Technical Description Hydraulic Excavator A B Operating Weight,, t Engine Output kw ( HP) Bucket Capacity,, m Technical Data Engine Deutz-Diesel engine Rating per ISO kw ( HP) at RPM Model BF M E Typ cylinder-in-line,
More informationR 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 31,7 33,4 t Engine Output 145 kw (197 HP)
Technical Description Hydraulic Excavator R 934 B litronic` Machine for Industrial Applications Operating Weight 31,7 33,4 t Engine Output 14 kw (197 HP) Technical Data Engine Rating per ISO 9249 14 kw
More informationLog Loader LH 60 M Timber
Product Information Log Loader LH 60 M Timber Operating weight: 44,800 kg Engine: 200 kw / 272 HP Stage IV Stage IIIA 2 LH 60 M Timber Litronic Performance Power plus speed Redefined performance Economy
More informationWHEELED EXCAVATORS WX148 I WX168 I WX188
WHEELED EXCAVATORS WX148 I WX168 I WX188 WHEELED EXCAVATORS WX148 I WX168 I WX188 THE NEW GENERATION OF WHEELED EXCAVATORS 2 THE 8 SERIES Power and Control The WX wheeled excavators are designed to deliver
More informationMaterial Handling Machines LH 40 Industry LH 50 Industry
Material Handling Machines LH 4 Industry LH Industry Operating Weight: 8,2 9,9 lb Engine: 1 kw / 28 HP (SAE J1349) 1 kw / 211 HP (ISO 9249) Stage Tier 4f System Performance: 221 / 246 kw LH 4 M Litronic
More informationM313D. Wheel Excavator. The D Series incorporates innovations for improved performance and versatility.
M313D Wheel Excavator The D Series incorporates innovations for iproved perforance and versatility. High lifting capacity, fast cycle ties and ease of operation lead to increased productivity and lower
More informationWheeled Excavator A 918 Compact. Operating Weight: 17,500 19,600 kg Engine: 115 kw / 156 HP Stage IV Bucket Capacity: m³
Wheeled Excavator A 98 Copact Operating Weight: 7, 9,6 kg Engine: kw / 6 HP Stage I Bucket Capacit:.7. ³ A 98 Copact Litronic Operating Weight: 7, 9,6 kg Engine: kw / 6 HP Stage I Bucket Capacit:.7. ³
More informationCrawler Excavator R 944 C SME. Operating Weight: 43,300 43,800 kg Engine Output: 190 kw / 258 HP Stufe IIIA / Tier 3 Bucket Capacity:
Crawler Excaator R 944 C SME Operating Weight: 43,300 43,800 kg Engine Output: 190 kw / 258 HP Stufe IIIA / Tier 3 Bucket Capacity: 2.50 3.00 ³ R 944 C SME Litronic Operating Weight: 43,300 43,800 kg Engine
More informationR 944 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Operating Weight 39,2 41,6 t Engine Output 180 kw (245 HP)
Technical Description Hydraulic Ecavator R 9 B litronic` Machine for Industrial Applications Operating Weight 39, 1,6 t Engine Output 18 kw (5 HP) The Better Machine. Engine Rating per ISO 99 18 kw (5
More informationCrawler Excavator R 926COMPACT. Operating Weight: 25,050 28,900 kg Engine Output: 120 kw / 163 PS Bucket Capacity: m³
Crawler Excavator R 926COMPACT Operating Weight: 2, 28,9 kg Engine Output: 12 kw / 163 PS Bucket Capacity:. 1.3 ³ R 926COMPACT Operating Weight: 2, 28,9 kg Engine Output: 12 kw / 163 HP Bucket Capacity:.
More informationR 954 C SME. Product Information: Crawler Excavator
Product Inforation: Crawler Excavator R 954 C SME Operating Weight with Backhoe Attachent: 59,400 60,900 kg Operating Weight with Shovel Attachent: 61,850 6,450 kg Engine Output 40 kw / 36 HP Stage IIIA
More informationWheeled Excavator A 924 Rail
Wheeled Ecavator A 924 Rail litronic` Friction Drive Operating Weight: 21,8 24,7 kg Engine: 11 kw / 15 HP Technical Data Diesel Engine Rating per ISO 9249 Model Tpe Bore / Stroke Displaceent Engine operation
More informationWHEELED EXCAVATORS WX148 I WX168 I WX188 MISSION ACCOMPLISHED. EXPERTS FOR THE REAL WORLD SINCE 1842
WHEELED EXCAVATORS WX148 I WX168 I WX188 MISSION ACCOMPLISHED www.casece.co EXPERTS FOR THE REAL WORLD SINCE 1842 1 2 WHEELED EXCAVATORS WX148 I WX168 I WX188 POWER AND CONTROL The WX wheeled excavators
More informationRailroader A 922 Rail. Operating Weight: 19,900 22,800 kg Engine: 110 kw / 150 HP
Railroader A 922 Rail Operating Weight: 19,9 22,8 kg Engine: 11 kw / 15 HP A 922 Rail Litronic Operating Weight: 19,9 22,8 kg Engine: 11 kw / 15 HP Perforance Copact, flexible Perfect cobination for axiu
More informationSAC1300S SANY All Terrain Crane 130 Tons Lifting Capacity
SAC1300S SANY All Terrain Crane Max. Lifting Capacity: 130 t Max. Boo Length: 63 Max. Lifting Height: 92.5 www.sanyglobal.co 02 03 Technical Features Technical Features Efficient Power Syste The carrier
More informationMining Excavator R 9100
Mining Excavator R 9100 Operating Weight with Backhoe Attachent: 108.5 tonnes / 120 tons Shovel Attachent: 112.5 tonnes / 124 tons Engine: 565 kw / 757 HP Bucket Capacity: 7.0 ³ / 9.2 yd³ Shovel Capacity:
More informationA 934 C HD ERC. Machine for Industrial Applications. 129 kw / 175 HP. Engine Output (SAE J1349): Engine Output (ISO 9249):
Machine for Industrial Applications A 934 C HD ERC Operating Weight: Engine Output (SAE J1349): Engine Output (ISO 9249): 92,370 94,360 lbs 129 kw / 173 HP 129 kw / 175 HP With the award-winning ERC system
More informationFreePhone:
DEMAG AC0-2 0 Tonne ALL TERRAIN CRANE www.titancranes.co.nz FreePhone: 0800 8 2 TERE AC0-2 0 TONNE ALL TERRAIN CRANE AC 0-2 HIGHLIGHTS Due to the (newly) optiized boo syste, the AC 0-2 has higher duties
More informationR 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 69,885 73,630 Engine Output 197 HP (145 kw)
Technical Description Hydraulic Excavator R 934 B litronic` Machine for Industrial Applications Operating Weight 69,88 73,63 Engine Output 197 HP (14 kw) Technical Data Engine Rating per ISO 9249 197 HP
More informationA 934 C ERC. Machine for Industrial Applications. 129 kw / 175 HP. Engine Output (SAE J1349): Engine Output (ISO 9249):
Machine for Industrial Applications A 934 C ERC Operating Weight: Engine Output (SAE J1349): Engine Output (ISO 9249): 83,650-84,350 lb 129 kw / 173 HP 129 kw / 175 HP With the award-winning ERC system
More informationWHEELED EXCAVATORS WX148 I WX168 I WX188
WHEELED EXCAVATORS WX148 I WX168 I WX188 WHEELED EXCAVATORS WX148 I WX168 I WX188 2 Power and Control The WX wheeled excavators are designed to deliver a axiu of productivity and precision. The extra powerful
More informationR 924 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications
Technical Description Hydraulic Excavator R 924 B litronic` Machine for Industrial Applications Operating Weight 9,63 66, lb Engine Output 173 HP (127 kw) Technical Data Engine Rating per ISO 9249 173
More informationCrawler Excavator. litronic` Operating Weight: 26,170 28,340 kg Engine Output: 130 kw / 177 HP Bucket Capacity: 0,30 1,40 m 3
Crawler Excavator R C litronic` Operating Weight:,, kg Engine Output: kw / HP Bucket Capacity:,, m Technical Data Engine Rating per ISO kw ( HP) at RPM Model Liebherr D S Type cylinder in-line Bore/Stroke
More informationWheeled Excavator A 900 C. Operating Weight: 36,800-42,800 lb Engine Output: 95 kw / 129 HP Bucket Capacity: yd³
Wheeled Excavator A 9 C Operating : 36,8-42,8 lb Engine Output: 9 kw / 129 HP Bucket Capacity:.37-1. yd³ A 9 C Operating : 36,8-42,8 lb Engine Output: 9 kw / 129 HP Bucket Capacity:.37-1. yd³ 2 A 9 C Litronic
More informationWHEELED EXCAVATORS WX188 I WX218 MISSION ACCOMPLISHED
WHEELED EXCAVATORS WX188 I WX218 MISSION ACCOMPLISHED 2 WHEELED EXCAVATORS THE 8 SERIES POWER AND CONTROL The WX wheeled excavators are designed to deliver a axiu of productivity and precision. The extra
More informationSTC600S STC600S TRUCK CRANE 60 TONS LIFTING CAPACITY. Quality Changes the World
STC600S STC600S TRUCK CRANE 60 TONS LIFTING CAPACITY 2 COMPANY BRIFE INTRODUCTION COMPANY BRIFE INTRODUCTION 3 SANY Autoobile Hoisting Machinery is one of the core business unit of Sany Heavy Industry,
More information312E. Hydraulic Excavator
312E Hydraulic Excavator Engine Drive Engine Model Cat C4.4 ACERT Maxiu Travel Speed 5.5 k/h 3.4 ph Net Power SAE J1349 68 kw 91 hp Maxiu Drawbar Pull 114 kn 25,628 f Gross Power SAE J1995 71 kw 95 hp
More informationEngine Output: 90 kw / 122 HP - 94 kw / 128 HP Bucket Capacity: m³
Wheeled Excavators A 314 A 316 Operating : 14,4-18,3 kg Engine Output: kw / 122 HP - 4 kw / 128 HP Bucket Capacity:.1 -. m³ A 314 Operational weight: 14,4-16,6 kg Engine output: kw / 122 HP Bucket capacity:.1
More informationSPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E175C 96 kw hp Kg 0.24 m m 3
SPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY E175C 96 kw - 129 hp 19180 Kg 0.24 3-0.90 3 E175C MORE PRODUCTIVITY Tier 4 interi engine and SCR technology, which optiizes cobustion,
More informationSPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E195C 96 kw hp Kg 0.24 m m 3
SPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY E195C 9 kw - 129 hp 20400 Kg 0.24 3-0.90 3 MORE PRODUCTIVITY Tier 4 interi engine and SCR technology, which optiizes cobustion, deliver
More informationHYDRAULIC EXCAVATORS HX230E I HX240E I HX270E I HX310E I HX390E HX500E I R964C I R974C
E HYDRAULIC EXCAVATORS HX230E I HX240E I HX270E I HX310E I HX390E HX500E I R964C I R974C This innovative system technology includes the exclusive energyefficient; Positive Control twin-circuit hydraulic
More informationSTC250 TRUCK CRANE 25t Lifting Capacity
STC250 TRUCK CRANE 25t Lifting Capacity PAGE 01 stc250 TRUCK CRANE 25t Max. rated lifting capacity: 25t. Min. working radius: 3.0. 33.5 Full extension of ain boo 33.5M, hexagonal profile, ade of HG 785
More informationLiebherr Specialist Machines. for Scrap Handling
Liebherr Specialist Machines for Scrap Handling 2 Handling scrap steel etal and other etals is one of the toughest operational areas in industrial aterial handling. To cope with this, robustness and reliability
More informationTIER 3 ENGINE POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E175C 96 kw hp Kg 0.24 m m 3
TIER 3 ENGINE POWER MAX OPERATING WEIGHT BUCKET CAPACITY E175C 96 kw - 129 hp 18720 Kg 0.24 3-0.90 3 AS LONG AS WE KEEP BUILDING ROADS, THER MORE PRODUCTIVITY The hydraulic syste axiizes perforance according
More informationWheeled Excavator. A 912 Compact. Operating Weight kg Engine 90 kw / 122 HP Stage IV Bucket Capacity m³
Wheeled Excavator A 912 Copact Operating Weight 12.700 13.900 kg Engine 90 kw / 122 HP Stage IV Bucket Capacit 0.15 0.48 ³ Perforance Copact, Flexible Perfect Cobination for Maxiu Perforance Econo A Sound
More informationE175C SPECIFICATIONS ENGINE TIER 4 INTERIM ELECTRICAL SYSTEM CAPACITIES SWING CAB AND CONTROLS UNDERCARRIAGE HYDRAULIC SYSTEM
E175C SPECIFICATIONS ENGINE TIER 4 INTERIM Make and odel...fpt F4HFE413H*A001 Net flywheel Power (ISO 14396/ECE R120)...96 kw/129 hp (2200 rp) Maxiu torque...496 N (1600 rp) Type... Water-cooled, direct
More informationWheeled Excavator. Operating Weight: 11,800 12,800 kg Engine Output: 75 kw / 102 HP Bucket Capacity: m³
Wheeled Excavator A 910COMPACT Operating Weight: 11,800 12,800 kg Engine Output: 75 kw / 102 HP Bucket Capacity: 0.15 0.48 m³ A 910COMPACT Operating Weight: 11,800 12,800 kg Engine Output: 75 kw / 102
More informationSRC 350 ROUGH-TERRAIN CRANE 35 metric tons capacity
SRC 350 ROUGH-TERRAIN CRANE 35 etric tons capacity PAGE 01 SRC 350 ROUGH-TERRAIN CRANE The international product developed jointly by the experts of the two countries based on the Sino-Aerican R&D platfor;
More informationCrawler Excavator R 970 SME
Crawler Excaator R 970 SME Operating Weight with Backhoe Attachent: 78,500 80,300 Operating Weight with Shoel Attachent: 79,100 81,000 Motor: 330 kw / 449 P Bucket Capacity: 4.00 5.00 ³ Shoel Capacity:
More informationWheeled Excavator A 912 Compact. Operating Weight: 12,700 13,900 kg Engine: 90 kw / 122 HP Stage IV Bucket Capacity: m³
Wheeled Excavator A 912 Copact Operating Weight: 12,700 13,900 kg Engine: 90 kw / 122 HP Stage IV Bucket Capacit: 0.15 0.48 ³ A 912 Copact Litronic Operating Weight: 12,700 13,900 kg Engine: 90 kw / 122
More informationWheeled Excavator A 912 COMPACT. Operating Weight: 12,700 13,900 kg Engine Output: 80 kw / 109 HP Bucket Capacity: m³
Wheeled Excavator A 912 COMPACT Operating Weight: 12,700 13,900 kg Engine Output: 80 kw / 109 HP Bucket Capacity: 0.15 0.48 m³ A 912COMPACT Operating Weight: 12,700 13,900 kg Engine Output: 80 kw / 109
More informationCrawler Excavator R 934 C. Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Stufe IIIA / Tier 3 Bucket Capacity:
Crawler Excavator R 934 C Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Stufe IIIA / Tier 3 Bucket Capacity: 1.65 2.00 m³ R 934 C Litronic Operating Weight: 32,600 33,500 kg Engine
More informationTechnical Description A 308 Hydraulic Excavator
Technical Description A Hydraulic Ecavator Operating weight 9, 9 t Engine output 6 kw (76 HP) Bucket capacity,, m Hydraulic Compact Ecavators are put to work in the most confined places, and at the same
More informationTIER 3 ENGINE POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E385C EL/LC E385C BEH 209 kw / 280 hp Kg Kg 0.74 m m m 3-2.
TIER 3 ENGINE POWER MAX OPERATING WEIGHT BUCKET CAPACITY E385C EL/LC E385C BEH 209 kw / 280 hp 38292 Kg 36453 Kg 0.74 3-1.85 3 0.74 3-2.10 3 E385C POWER AND FAST CYCLES Powerful Tier 3 engine. The advanced
More informationLIEBHERR Mobile Crane LTM
LIEBHERR Mobile Crane echnical Data Contact: Gerry Coughlin M: +64 27 272 6395 E: gerry@craneworksnz.co.nz W: craneworksnz.co.nz Freephone 0800 420 022 Diensions 11460 13503 4084 2300 880 4491 928 E A
More informationSPECIFICATIONS UNDERCARRIAGE
SPECIFICATIONS ENGINE Model... Yanar 4TNV94L Type... 4-cycle water-cooled, direct injection No. of cylinders... 4 Rated power ISO 9249, net... 34.1 kw (45.7 HP) at 2 000 in -1 (rp) EEC 80/1269, net...
More informationMachine for Industrial Applications A 924 C
Machine for Industrial Applications A 924 C Operating weight: Engine output: 27, - 28,8 kg 13 kw / 184 HP A 924 C Operating weight: 27, - 28,8 kg Engine output: 13 kw / 184 HP 2 A 924 C Litronic Machine
More information316E L. Hydraulic Excavator
316E L Hydraulic Excavator Engine Drive Engine Model Cat C4.4 ACERT Maxiu Travel Speed 5.2 k/h 3.2 ph Engine Power ISO 14396 89 kw 119 hp Maxiu Drawbar Pull 156.2 kn 35,115 f Weights Miniu Operating Weight
More information