NEW 7A SERIES. WHEELED EXCAVATOR Applied Tier 3 Engine. Robex 200W-7A PLEASE CONTACT

Transcription

1 Standard Equipent ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding side window Lockable door Hot & cool box Accessory box & Ashtray Coputer Aided Power Optiization (New CAPO) syste 2power ode, 3work ode, 2user ode Auto deceleration & one touch deceleration syste Auto war up syste Auto overheat prevention syste Heater(7,500 kcal/hr, 30,000BTU/hr) & Defroster Self diagnostic syste Centralized onitoring LCD display Engine speed Clock & Error code Gauges Fuel level gauge Engine coolant teperature gauge Hyd. oil teperature gauge Warning Fuel level Check Engine & CPU Engine oil pressure Engine coolant teperature Hyd. oil teperature Low battery Air cleaner clogging Indicator Power ax. Preheat & Engine waringup One touch decel Optional Equipent Independent operating 4 outrigger Airconditioner (5,000kcal/hr, 20,000BTU/hr) FATC (Full Autoatic Teperature Control) Heater & Defroster Sun visor for cabin inside Fuel filler pup (36/in, 9.5 US gp) Beacon lap Safety lock valve for boo cylinder with overload warning device Safety lock valve for ar cylinder Single acting piping kit (breaker, etc) Double acting piping kit (clashell, etc) 12 volt power supply (DCDC converter) Electric. transducer CD Player Radio Quick coupler Various optional Ars Super short ar (2.0, 6 7 ) Short ar (2.4, 7 10 ) Various optional Buckets (SAE heaped) Narrow bucket (0.51 3, 0.67 yd 3 ) Light duty bucket (0.87 3, 1.14 yd 3 ) Light duty bucket (0.92 3, 1.20 yd 3 ) Light duty bucket (1.10 3, 1.44 yd 3 ) Light duty bucket (1.20 3, 1.57 yd 3 ) Light duty bucket (1.34 3, 1.75 yd 3 ) Heavy duty bucket (0.74 3, 0.97 yd 3 ) Heavy duty bucket (0.90 3, 1.18 yd 3 ) Heavy duty bucket (1.05 3, 1.37 yd 3 ) Rock bucket(0.87 3, 1.14 yd 3 ) Slope finishing bucket(0.75 3, 0.98 yd 3 ) Cabin lights Cabin FOPS/FOG(ISO/DIS 10262) FOPS(Falling Object Protective Structure) FOG(Falling Object Guard) WHEELED EXCAVATOR Applied Tier 3 Engine NEW 7A SERIES Robex 200W7A Reovable clean out screen for oil cooler Door and cab locks, one key Two outside rearview irrors Fully adjustable suspension seat with seat belt Slidable joystick, pilotoperated Autoatic swing brake Reovable reservoir tank Water separator & Fuel prefilter, fuel line Boo holding syste Ar holding syste Counterweight (3,400, 7,500 ) ono boo (5.65, 18 6 ) Ar (2.9, 9 6 ) A/F radio and cassette Radio reote switch Console box tilting syste (LH.) Three front working light Electric horn Batteries (2 x 12V x 100 AH) Battery aster switch Starting Aid(air grid heater) cold weather Standard bucket(0.80 3, 1.05 yd 3 ) Rear dozer and front outrigger Rear blade (610 x 2490 ) Tires dual ( PR) Travel alar Fuel warer Cabin Roofcover Transparent Tool kit Operator suit Special cowling Air vent type side door Engine eergency control Undercarriage Rear and front outrigger Front dozer and rear outrigger Tiers dual ( solid) Seat Adjustable air suspension seat Mechanical Suspension seat with heater Adjustable air suspension seat with heater Low noise kit Ring fan Special F/G hood Standard and optional equipent ay vary. Contact your Hyundai dealer for ore inforation. The achine shown ay vary according to International standards. All US easureent rounded off to nearest pounds or inches. PLEASE CONTACT Rev 1. 0 Soe of the photos ay include optional equipent.

2 Robex 200W7A Built for Maxiu Power, Perforance, Reliability. A new chapter in construction equipent has now begun. Making the drea a reality. Soe of the photos ay include optional equipent. HYUNDAI CONSTRUCTION EQUIPMENT 02 / 03

3 Robex 200W7A Technology in Cab Design Operator s Cofort is Foreost. Wide Cab Exceeds Industry Standards. Visibility. Even ore visibility than before, for safer, ore efficient operating. Excellent Ventilation. Ventilation has been iproved by the addition of the larger fresh air intake syste, and by providing additional air flow throughout the cab.. Sliding front and side windows provide iproved ventilation.. A large sunroof offers upward visibility and additional ventilation. Cofortable Operator Environent. The control levers and seat can be adjusted to provide axiu operator cofort.. The seat is fully adjustable for optiu operating position, reducing operator fatigue.. Console boxes slide forward and backward for iproved accessibility.. The proportional pressure controls reduce unnecessary exertion while ensuring precise operation.. Large windows allow excellent visibility in all directions. Low noise design. The Robex new 7A series was designed with low operation noise in ind.. Hyundai engineering helps to keep interior and exterior noise levels to a iniu.. The cab's noise levels have been additionally reduced by iproving the door seals for the cab and engine copartents.. An insulated diesel engine copartent with sounddaping aterial also reduces noise. 1 1 Wide, Cofortable Operating Space Steel Cover Sunroof Dial Type Engine Speed Switch and / Key Switch Reote Radio Control and Deluxe Cassette HYUNDAI CONSTRUCTION EQUIPMENT 04 / 05

4 3 Robex 200W7A Iproved Intelligent Display Instruent Panel is installed in front of RH console box. It is easy to check all critical systes with easytoread indicators. Operating Environent Miniization of Shock and Vibration through Cab Mounting Syste The application of Viscous Mounting to the cabin support provides the operator with a uch iproved ride. The operator work efficiency will increase as the shock and noise level in the cabin decreases. Maxiu Protection Storage box and Cup Holder An Additional storage box and cup holder are located behind operator s seat, and it keeps food and beverages cool or hot. Wide Cab with Excellent Visibility The cab is rooy and ergonoically designed with low noise level and good visibility. A full view front window and large rear and side windows provide excellent visibility in all directions. Highly Sensitive Joystick and Easy Entrance New joystick grips for precise control have been equipped with 4 switches. Left Right Power boost/duy One touch deceleration Horn/Optional/Duy Easyto Control Panels Switches and other essential controls are located near the operator. This helps keep operator oveent to a iniu, enhancing control with less operator fatigue. Rear Eergency Exit Window Rear Exit Window is designed with easy exit for operator's safety. Raiseup Wiper and Cabin Lights Raiseup wiper has enhanced for the better front view. Cabin Lights enhances safety by brightly lighting the surroundings during night work(optional) Wide, Cofortable Operating Space All the controls are designed and positioned according to the latest ergonoic research. Reinforced pillars have also been added for greater cab rigidity. Adjustable Steering Colun The best working conditions in a pleasant environent. Switch panel(r.h) Horn button Option button(breaker operation) Reote radio control Cluster Hour eter Accel pedal Brake pedal Multi function switch(r.h) Steering Switch panel(front) Multi function switch(l.h) Safety lever Joystick control lever Power Max. button One touch decel button Dozer blade Lever Air conditioner and heater controller Fully adjustable suspension seat HYUNDAI CONSTRUCTION EQUIPMENT 06 / 07

5 Autoatic Engine Overheat Prevention If the engine coolant teperature gets too high, the CPU controller lowers the engine speed and cools the engine. Anti Restart Syste The new syste protects the starter fro restarting during engine operation, even if the operator accidentally turns the start key again. Power boost control Syste When the power boost syste is activated, digging power increases about 10%. It is especially useful when extra power is teporarily needed, for instance, when digging hard earth and rock, or if the bucket teeth are stopped by a stubborn tree root. Autoatic Waringup Syste After the engine is started, if the engine coolant teperature is low, the CPU controller increases the engine speed and autoatically increases the pup flow rate to war up the engine ore effectively. CUMMINS QSB6.7 Engine The six cylinder 4 cycle Turbo Charged Engine with Charged Air Cooling, Has High Power output, Reliability, econoical, and low eission. This engine eets Tier III eissions regulations. The Definition of Progress The Quantu Syste B Series 6.7liter engine cobines fullauthority electronic controls with the reliable perforance. The electronics with the QSB6.7 have been proven with our highhorsepower productsworking in the harshest, ost deanding environentssearch as dusty, nonstop ining operations while eeting eissions regulations worldwide. The QSB6.7 features 24 valve designed with centered injectors and syetrical piston bowl. The cobination of iproved airflow and evenly dispersed fuel results in increased power, iproved transient reponse and reduced fuel consuption. Advanced Hydraulic Syste ADVANCED CAPO SYSTEM NEW MODE CONTROL SYSTEM POWER MODE H ode: High power S ode: Standard power 2 WORK MODE Heavy duty work General work Breaker 3 USER MODE M ode: Maxiu Power U ode : Meorizing Operator s Preferable Power Setting 1 The advanced CAPO(Coputer Aided Power Optiization) syste aintains engine and utual pup power at optiu levels. Mode selections are designed for various work loads and aintaining high perforance while reducing fuel consuption. Features such as auto deceleration and power boost are included in the syste. The syste onitors engine speed, coolant teperature, and hydraulic oil teperature. Contained within the syste are self diagnostic capabilities which are displayed by error codes on the cluster. Auto Deceleration Syste When reotecontrol valves are in neutral position ore than 4 seconds, CPU controller instructs the accel actuator to reduce engine speed to 1000rp. This decreases fuel consuption and reduces cab noise levels. Max. Flow Cutoff Syste For precise control and finishing work, the Max. Flow Cutoff Syste reduces pup flow, thus allowing sooth operation. Self Diagnosis Syste The CPU controller diagnoses probles in the CAPO syste caused by electric and hydraulic alfunctions and displays the on the LCD onitor of the cluster through error codes. This controller has the capacity to identify 48 distinct types of errors. As the inforation fro this device, such as engine rp, ain pup delivery pressure, battery voltage, hyd. teperature, and the state of all types of electric switches, provides the operator with a uch ore exact state of achine operating condition. This akes the achine easier to troubleshoot when anything does go wrong. One Touch Decel Syste When the one touch decel switch is pressed, CPU controller controls the accel actuator to reduce engine speed to 850 rp. And then the one touch decel switch is pressed again, the engine speed recovers. Pup Flow Control Syste In neutral position: Pup flow is reduced to a iniu to eliinate power loss. In operation: Maxiu pup flow is delivered to the actuator to increase the speed. With oveent of the control lever, pup flow is autoatically adjusted and the actuator speed can be proportionally controlled. Boo & Ar Holding Syste The Holding valves in the ain control valve prevents the boo & ar fro dropping over an extended period in neutral position. Ar Flow Regeneration Syste Ar flow regeneration valve provides sooth arin operation without cavitation. Hydraulic Daper in Travel Pedal Iproved travel controllability & feeling by shock reducing when starting and stopping. Large Tooox & Safe Footholds Antislip footholds and wide tooox iproved safety and convenience. Increased Higher Perforance Strong and Stable Lower Frae Reinforced boxsection frae is all welded, lowstress, highstrength steel. It guarantees safety and resistance against external ipact when driving on rough ground and working on wet sites through high tensile strength steel panels, with protection cover for transission. Reinforced Bucket and Bucket Linkage Sealed and adjustable bucket linkage provides less wear of pins and bushes as well as silent operation.the design includes bucket link durability and anti wear characteristics. Additional reinforceent plates on cutting edge section. Reinforced bucket is ade with thicker steel and additional lateral plate. Powerful and Preciser Swing Control Iproved shock absorbing characteristics ake stopping a precise and sooth action HYUNDAI CONSTRUCTION EQUIPMENT 08 / 09

6 Robex 200W7A Durability of structure proven through FEM(Finite Eleent Method) analysis and long ter durability test. Reliability & Serviceability Full open doors and aster key syste provide easy access for servicing. Side Cover with Left & Right Swing Open Type Easy access to vital coponents gives unrestricted view of coponent allows easy aintenance and repair. Easy to aintain engine coponents The cooling and preheating syste are provided for optiu and iediate operation, guaranteeing longer life for the engine and hydraulic coponents. Servicing of the engine and hydraulics is considerably siplified due to total accessibility. Easy to Change Air Cleaner Assebly Air cleaner are centralized in one or the sae copartent for easy service. Highly efficient Hydraulic Pup Pup output capacity has been increased. Large tool box for extra storage HYUNDAI CONSTRUCTION EQUIPMENT 10 / 11

7 Specifications Backhoe attachent Rated flywheel horse power Engine Type SAE DIN Model J1995 (gross) J1349 (net) 6271/1 (gross) 6271/1 (net) Max. torque Bore x stroke Piston Batteries Starting otor Alternator Hydraulic syste Main pup Type Max. flow Subpup for pilot circuit Drives & Brakes Cuins QSB6.7 Water cooled, 4 cycle Diesel, 6Cylinders in line, direct injection, Turbocharged, charge air cooled, Low eission 164HP (122kW) / 1,900rp 153HP (114kW) / 1,900rp 166PS (122kW) / 1,900rp 155PS (114kW) / 1,900rp 66.9f. (484f.ft) / 1,400rp 107 (4.21in) x 124(4.88in) 6,700cc (409 in 3 ) 2 x 12V x 100AH 24V, 4.5kw 24V, 50Ap Two variable displaceent piston pups 2 x 222/in (58.1 US gp / 48.4 UK gp) Gear pup Crosssensing and fuel saving pup syste Hydraulic otors Two speed axial piston otor Travel with brake valve Swing Axial piston otor with autoatic brake Relief valve setting Ipleent circuits 330 f/c 2 (4,690 psi) Travel 360 f/c 2 (5,120 psi) Power boost (boo, ar, bucket) 360 f/c 2 (5,120 psi) Swing circuit 240 f/c 2 (3,410 psi) Pilot circuit 40 f/c 2 ( 570 psi) Service valve Installed Hydraulic cylinders Boo : ,290 ( ) Ar : ,510 ( ) No. of cylinderbore x rod x stroke Bucket : ,055 ( ) Blade : ( ) Outrigger: ( ) Swing syste Swing otor Swing reduction Swing bearing lubrication Swing brake Swing speed Steering Syste Axial piston otor 2stage planetary Greasebathed Autoatic, spring applied hydraulic released 11 rp Hydraulically actuated, orbitral type steering syste actuates on front wheels through the steering cylinders. Min. turning radius 6,690 (21 11 ) Control Pilot pressure operated joysticks and pedals with detachable lever provide alost effortless and fatigueless operation. Pilot control Engine throttle External lights Coolant & Lubricant capacity (refilling) Fuel tank liter US gal 81.9 UK gal 68.2 Engine coolant Engine oil Swing device Axle (Front/Rear) 16.0 / / /3.5 Hydraulic syste(including tank) Hydraulic tank Transission Undercarriage Two joysticks with one safety lever (LH): Swing and ar, (RH): Boo and bucket(iso) Electric, Dial type Two lights ounted on the boo and two under the cabin Reinforced box section frae is allwelded, lowstress. Rear dozer blade and outrigger are available. A bolton design. Front outrigger lug is pinon. A very useful addition for leveling and back filling or Dozer blade cleanup work. Can be ounted on the rear. Indicated for ax. operation stability when digging and Outrigger lifting. Can be ounted on the rear. Buckets 0.51 (0.67) 0.80 (1.05) 1.10 (1.44) 0.87 (1.14) 1.20 (1.57) SAE heaped 3 (yd 3 ) 0.92 (1.20) SAE heaped 0.51 (0.67) 0.80 (1.05) 0.87 (1.14) 0.92 (1.20) 1.10 (1.44) 1.20 (1.57) 1.34 (1.75) 0.74 (0.97) 0.90 (1.18) 1.05 (1.37) 0.87 (1.14) 0.75 (0.98) Capacity 3 (yd 3 ) : Standard backhoe bucket : Heavyduty Ars CECE heaped 0.45(0.59) 0.70(0.92) 0.75(0.98) 0.80(1.05) 0.96(1.26) 1.00(1.31) 1.15(1.50) 0.65(0.85) 0.80(1.05) 0.92(1.20) 0.75(0.98) 0.65(0.85) Without side cutters 700(27.6) 1,000(39.4) 1,090(42.9) 1,150(45.3) 1,320(52.0) 1,400(55.1) 1,550(61.0) 985(38.8) 1,070(42.1) 1,290(50.8) 1,140(44.9) 1,790(70.5) : Rock bucketheavy : Slope finishing bucket Width (in) 1.34 (1.75) 0.74 (0.97) 0.90 (1.18) 1.05 (1.37) With side cutters 820(32.3) 1,120(44.1) 1,210(47.6) 1,270(50.0) 1,440(56.7) 1,520(59.8) 1,670(65.7) Weight () 570(1260) 700(1540) 740(1630) 770(1700) 830(1830) 850(1870) 920(2030) 770(1700) 810(1790) 890(1960) 900(1980) 880(1940) Boo Ar 0.87 (1.14) 0.75 (0.98) Recoendation (ft.in) 2,000 (6 7 ) 5,650 (18 6 ) 2,400 (7 10 ) 2,900 (9 6 ) : Applicable for aterials with density of 2,000 / 3 (3,370 / yd 3 ) or less : Applicable for aterials with density of 1,600 / 3 (2,700 / yd 3 ) or less : Applicable for aterials with density of 1,100 / 3 (1,850 / yd 3 ) or less Boo and ars are of allwelded, lowstress, fullbox section design. 5,650 (18 6 ) ono boo and 2,000 (6 7 ), 2,400 (7 10 ), 2,900 (9 6 ) ars are available. Buckets are allwelded, highstrength steel ipleents. Digging force 2,000 (6 7 ) 2,400 (7 10 ) 2,900 (9 6 ) Drive ethod Drive otor Max. drawbar pull Max. travel speed(high) / (low) Gradeability Parking brake Axles & Wheels Fully hydrostatic type Axial piston otor, bent axis design 10,800 f (23,800 f) 33 k/hr (20.5 ph) / 8.5 k/hr (5.3 ph) 31.5(61 %) Multi wet disc Full floating front axles is supported by center pin for oscillation. It can be locked by oscillation lock cylinders. Rear axle is fixed on the lower chassis Tires : PR, Dual (tube type), Option : , Dual (solid type) Operating weight (approxiate) Operating weight, including 5.65 (18 6 ) boo, 2.90 (9 6 ) ar, SAE heaped (1.05 yd 3 ) backhoe bucket, lubricant, coolant, full fuel tank, hydraulic tank and the standard equipent. Major coponent weight Upperstructure 8,950 (19,730 ) Counterweight 3,400 ( 7,500 ) Boo (with ar cylinder) 1,480 ( 3,260 ) Operating weight Undercarriage Operating Weight () Front outrigger+rearblade 20,500 (45,200) Four outrigger 20,600 (45,400) Ar Bucket digging force Ar crowd force Length Weight SAE ISO SAE ISO (ft.in) () kn f f kn f f kn f f kn f f Note : Ar weight including bucket cylinder and linkage. 2,000 (6 7 ) 860 (1,890) [145.5] 13,600 [14,840] 29,980 [32,710] [165.8] 15,500 [16,910] 34,170 [37,280] [147.6] 13,800 [15,050] 30,420 [33,190] [155.1] 14,500 [15,820] 31,970 [34,880] Standard ar 2,400 (7 10 ) 950 (2,090) [145.5] 13,600 [14,840] 29,980 [32,710] [165.8] 15,500 [16,910] 34,170 [37,280] [123.1] 11,500 [12,550] 25,350 [27,650] [128.4] 12,000 [13,090] 26,460 [28,870] 2,900 (9 6 ) 990 (2,180) [145.5] 13,600 [14,840] 29,980 [32,710] [165.8] 15,500 [16,910] 34,170 [37,280] 97.1 [105.9] 9,900 [10,800] 21,830 [23,810] [110.2] 10,300 [11,240] 22,710 [24,770] Reark [ ]: Power Boost Standard equipent HYUNDAI CONSTRUCTION EQUIPMENT 12 / 13

8 Diensions & Working ranges 200w7A Lifting Capacities Diensions Lifting capacities Rating overfront Rating overside or 360 degree D,D' E Boo : 5.65 (18 6 ) Ar : 2.00 (6 7 ) Bucket : (1.05yd 3 ) SAE heaped With 4 outrigger down At ax. reach () () () 7.5 (2) Capacity Q 200w7A 200w7A O F *3810 *8400 *3810 * (22.5) P A I J C N G B H M K L *8260 *18210 *8260 *18210 *5650 *12460 *5650 *12460 *4230 *9330 *4710 *10380 *4230 *9330 *4710 *10380 *3890 *8580 *4020 *8860 *3890 * (25.9) 8.48 (27.8) A B C D D E F G H I J K L M Wheel base Tread clearance of counterweight Tail swing radius Rearend length Overall width of upperstructure Overall of cap Min. ground clearance Overall width of lower structure clearance of blade up Depth of blade down Height of blade Width of blade clearance of outrigger up Depth of outrigger down Overall width of outrigger (ftin) 2,800(9 2 ) 1,874(6 2 ) 1,305(4 3 ) 2,800(9 2 ) 2,765(9 1 ) 2,530(8 4 ) 3,180(10 5 ) 345(1 2 ) 2,490(8 2 ) 445(1 6 ) 125(4.9 ) 610(2 0 ) 2,490(8 2 ) 1,220(4 0 ) 120(4.7 ) 3,770(12 4 ) N O P Q Boo length Ar length Shipping length of boo Shipping of boo Traveling length of boo Traveling of boo Standard Equipent 2,000 (6 7 ) 9,610 (31 6 ) 3,360 (11 10 ) 9,620 (31 7 ) 3,540 (11 7 ) 5,650 (18 6 ) 2,400 (7 10 ) 9,510 (31 2 ) 3,250 (10 8 ) 9,540 (31 4 ) 3,540 (11 7 ) (ftin) 2,900 (9 6 ) 9,490 (31 2 ) 3,100 (10 2 ) 9,520 (31 3 ) 3,410 (11 2 ) *13240 *29190 *11640 *25660 *13240 *29190 *11640 *25660 *7340 *16180 *8700 *19180 *9260 *20410 *9110 *20080 *8210 *18100 *7340 *16180 *8700 * *8210 *18100 *5450 *12020 *6180 *13620 *6620 *14590 *6630 *14620 *5450 *12020 *4650 *10250 *4980 * *4190 *9240 *4370 *9630 *4570 *10080 *4710 *10380 *4620 * *4620 *10190 Boo : 5.65 (18 6 ) Ar : 2.00 (6 7 ) Bucket : (1.05yd 3 ) SAE heaped With front outrigger and rear dozer blade down. At ax. reach () () () 7.5 (2) Capacity (28.6) 8.67 (28.4) 8.30 (27.2) 7.57 (24.8) 6.30 (20.7) Working ranges B D B' E C A A' F A A B B C D E F Boo length Ar length Max. digging reach Max. digging reach on ground Max. digging depth Max. digging depth (8' level) Max. vertical wall digging depth Max. digging Max. duping Min. swing radius 2,000 (6 7 ) 9,110 (29 11 ) 8,870 (29 1 ) 5,480 (18 0 ) 5,240 (17 2 ) 4,970 (16 4 ) 9,500 (31 2 ) 6,670 (21 11 ) 3,700 (12 2 ) 5,650 (18 6 ) 2,400 (7 10 ) 9480 (31 1 ) 9,260 (30 5 ) 5,880 (19 3 ) 5,670 (18 7 ) 5,440 (17 10 ) 9,730 (31 11 ) 6,900 (22 8 ) 3,620 (11 11 ) (ftin) 2,900 (9 6 ) 9,900 (32 6 ) 9,690 (31 9 ) 6,380 (20 11 ) 6,210 (20 4 ) 5,810 (19 1 ) 9,870 (32 5 ) 7,050 (23 2 ) 3,540 (11 7 ) *8320 *18340 *13190 *29080 *11570 *25510 *8320 *18340 *13190 *29080 *11570 *25510 *5680 *12520 *7370 *16250 *8720 *19220 *9260 *20410 *9100 *20060 *8170 *18010 NOTES 1. Lifting capacity is based on SAE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of tipping load with the achine on fir, level ground or 87% of full hydraulic capacity. *5680 *12520 *7370 * *4260 *9390 *4730 *10430 *5480 *12080 *6190 *13650 *6630 *14620 *6620 *14590 *4260 *9390 *4730 * *4670 *10300 *4990 * *3910 *8620 *4030 *8880 *4190 *9240 *4380 *9660 *4560 *10050 *4700 *10360 *4580 * The load point is a hook (standard equipent) located on the back of the bucket. 4. (*) indicates load liited by hydraulic capacity (22.5) 7.89 (25.9) 8.48 (27.8) 8.73 (28.6) 8.67 (28.4) 8.30 (27.2) 7.57 (24.8) 6.30 (20.7) Standard Equipent

9 Lifting Capacities Lifting capacities Rating overfront Rating overside or 360 degree Lifting capacities Rating overfront Rating overside or 360 degree Boo : 5.65 (18 6 ) Ar : 2.4 (7 10 ) Bucket : (1.05yd 3 ) SAE heaped With 4 outrigger down At ax. reach () () () () 7.5 (2) Capacity Boo : 5.65 (18 6 ) Ar : 2.9 (9 6 ) Bucket : (1.05yd 3 ) SAE heaped With 4 outrigger down At ax. reach () () () () 7.5 (2) Capacity *3520 *7760 *3520 * (24.1) ft *3120 *6880 *3120 * (21.2) *10060 *22180 *14300 *31530 *10060 *22180 *14300 *31530 *9300 *20500 *13750 *30310 *12340 *27210 *9540 *21030 *9300 *20500 *13750 *30310 *12340 *27210 *9540 *21030 *5090 *11220 *6790 *14970 *8290 *18280 *9080 *20020 *9140 *20150 *8490 *18720 *6550 *14440 *5090 *11220 *6790 *14970 *8290 * *8490 *18720 *6550 *14440 *4350 *9590 *5130 *11310 *5920 *13050 *6460 *14240 *6610 *14570 *6120 *13490 *4350 *9590 *5130 * *4050 *8930 *4390 *9680 *4790 *10560 *5070 *11180 *4050 * *3610 *7960 *3740 *8250 *3900 *8600 *4090 *9020 *4290 *9460 *4460 *9830 *4500 * *4500 * (27.3) 8.87 (29.1) 9.10 (29.9) 9.05 (29.7) 8.70 (28.5) 8.00 (26.2) 6.84 (22.4) *9190 *20260 *12400 *27340 *9190 *20260 *12400 *27340 *10160 *22400 *18610 *9800 *21610 *12890 *28420 *13070 *28810 *10830 *23880 *10160 *22400 *18610 *9800 *21610 *12890 *28420 *13070 *28810 *10830 *23880 *6150 *13560 *7810 *17220 *8830 *19470 *9140 *20150 *8760 *19310 *7410 *16340 *6150 *13560 *7810 * *7410 *16340 *3370 *7430 *3920 *8640 *4750 *10470 *5610 *12370 *6260 *13800 *6560 *14460 *6340 *13980 *3370 *7430 *3920 *8640 *4750 * *2400 *5290 *3690 *8140 *4090 *9020 *4550 *10030 *4920 *10850 *5050 *11130 *2400 *5290 *3690 * *3180 *7010 *3290 *7250 *3430 *7560 *3600 *7940 *3790 *8360 *3990 *8800 *4200 *9260 *4360 *9610 *3180 * (26.0) 8.81 (28.9) 9.34 (30.6) 9.56 (31.4) 9.51 (31.2) 9.18 (30.1) 8.53 (28.0) 7.46 (24.5) Boo : 5.65 (18 6 ) Ar : 2.4 (7 10 ) Bucket : (1.05yd 3 ) SAE heaped With front outrigger and rear dozer blade down. At ax. reach () () () () 7.5 (2) Capacity Boo : 5.65 (18 6 ) Ar : 2.9 (9 6 ) Bucket : (1.05yd 3 ) SAE heaped With front outrigger and rear dozer blade down. At ax. reach () () () () 7.5 (2) Capacity *3520 *7760 *3520 * (24.1) ft *3130 *6900 *3130 * (21.1) *10060 *22180 *14300 *31530 *10060 *22180 *14300 *31530 *9300 *20500 *13750 *30310 *12340 *27210 *9540 *21030 *9300 *20500 *13750 *30310 *12340 *27210 *9450 *21030 *5090 *11220 *6790 *14970 *8290 *18280 *9080 *20020 *9140 *20150 *8490 *18720 *6550 *14440 *5090 *11220 *6790 * *6550 *14440 *4350 *9590 *5130 *11310 *5920 *13050 *6460 *14240 *6610 *14570 *6120 *13490 *4350 * *4050 *8930 *4390 *9680 *4790 *10560 *5070 * *3610 *7960 *3740 *8250 *3900 *8600 *4090 *9020 *4290 *9460 *4460 *9830 *4500 * (27.3) 8.87 (29.1) 9.10 (29.9) 9.05 (29.7) 8.70 (28.5) 8.00 (26.2) 6.84 (22.4) *9250 *20390 *12490 *27540 *9250 *20390 *12490 *27540 *10070 *22200 *8690 *19160 *9950 *21940 *13040 *28750 *13090 *28860 *10820 *23850 *10070 *22200 *8690 *19160 *9950 *21940 *13040 *28750 *13090 *28860 *10820 *23850 *6130 *13510 *7800 *17200 *8830 *19470 *9150 *20170 *8770 *19330 *7400 *16310 *6130 * *3370 *7430 *3920 *8640 *4750 *10470 *5610 *12370 *6270 *13820 *6560 *14460 *6340 *13980 *3370 *7430 *3920 *8640 *4750 * *2290 *5050 *3700 *8160 *4100 *9040 *4560 *10050 *4930 *10870 *5050 *11130 *2290 * *3200 *7050 *3310 *7300 *3450 *7610 *3610 *7960 *3800 *8380 *4010 *8840 *4230 *9330 *4390 *9680 *3200 * (25.9) 8.78 (28.8) 9.30 (30.5) 9.53 (31.3) 9.48 (31.1) 9.15 (30.0) 8.49 (27.9) 7.42 (24.3) NOTES 1. Lifting capacity is based on SAE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of tipping load with the achine on fir, level ground or 87% of full hydraulic capacity. 3. The load point is a hook (standard equipent) located on the back of the bucket. 4. (*) indicates load liited by hydraulic capacity. HYUNDAI CONSTRUCTION EQUIPMENT 14 / 15 / 16 NOTES 1. Lifting capacity is based on SAE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of tipping load with the achine on fir, level ground or 87% of full hydraulic capacity. 3. The load point is a hook (standard equipent) located on the back of the bucket. 4. (*) indicates load liited by hydraulic capacity. HYUNDAI CONSTRUCTION EQUIPMENT 17