SRC 350 ROUGH-TERRAIN CRANE 35 metric tons capacity

Transcription

1 SRC 350 ROUGH-TERRAIN CRANE 35 etric tons capacity

2 PAGE 01 SRC 350 ROUGH-TERRAIN CRANE The international product developed jointly by the experts of the two countries based on the Sino-Aerican R&D platfor; The fully extended boo is 31.5 long, which is leading in the industry; hexagonal boo in optiized design features lighter load and stronger hoisting capacity. The autoatic transission box and AXLETECH steering drive axle fro Aerican DANA; Aerican Cuins all-electric control engine. With four-axle drive, the crane features good power perforance, boasting the axiu traveling speed higher than 40k/h and the axiu gradeability up to 75%; four-wheel steering ensures good aneuverability and long-life tires; four steering odes are available, enabling the iniu turning diaeter to be no ore than 6.2, and this greatly iproves the trafficability and cofort under coplicated road conditions. Main hydraulic eleents, such as hydraulic pup, otor, and valve, are of world-renowned brands, including Rexroth, etc. Fast lifting under light load, axiu single-rope speed up to 140/in, and high operation efficiency. Load feedback and constant power control of hydraulic syste, high efficiency and energy saving, strong overload capacity, good inching perforance, and long life span; unique slewing buffer design enables ore stable braking. Length of fully extended boo Gradeability Travelling speed % 40 k/h k/h

3 SRC 350 ROUGH-TERRAIN CRANE PAGE 02 Independently developed dedicated controller SYMC for construction achinery and the iported Swedish Scc screen as well as such ain electric control eleents. Adopting CAN bus full-digit network control technology, it boasts stable control signal, siple wiring harness and high reliability, and the equipent paraeters and operation paraeters can be fully displayed. The crane features all-round hoisting oentu protection and alaring functions; all-round logic and interlocked control enables a safer and ore reliable operation. The control chaber adopts the frae-type steel structure body, sliding door design, large area inlaid type safety glass, super-large inner space, and extra wide anipulation field of vision, bringing you brand new visual experience. The elaborately-ade industrial odeling with a novel appearance and tough style features clear visual perception, anifesting the international trend; advanced olding and electrophoretic processes significantly enhance the anufacturing accuracy of product.

4 PAGE 03 SRC 350 ROUGH-TERRAIN CRANE R2169 R

5 SRC 350 ROUGH-TERRAIN CRANE PAGE 04 Technical Paraeters Category Ite Unit Data Diensional paraeters Weight Power paraeters paraeters Traveling paraeters Main Perforance Data Operating speed paraeters Total crane length Total crane width Total crane height Axle base Overall weight Load Model of engine Rated engine power Max. engine torque of engine Load of front axle Load of rear axle Max. traveling speed Turning radius Min. turning radius (2/4) Min. ground clearance Approach angle Departure angle Max. gradeability Max. rated total lifting capacity Min. rated aplitude Max. lifting torque Basic ar Fully extended boo Fully extended boo + jib Span of outrigger (transverse longitudinal) Max. lifting height Basic ar Fully extended boo Fully extended boo + jib Length of lifting ar Basic ar Fully extended boo Fully extended boo + jib Installation angle of jib Max. lifting speed of single rope of ain winch (no load) Max. lifting speed of single rope of auxiliary winch (no load) Full extension/retraction tie of lifting ar Full extension/retraction tie of lifting ar Slewing speed Full extension/retraction tie of horizontal outrigger Full extension/retraction tie of vertical outrigger kg kg kg Kw/rp N./rp K/h % t kn. kn. kn. /in /in s s r/in s s Aerican Cuins QSB6.7 Tier 3 119/ / / % /39 43/ /31 25/25

6 PAGE 05 SRC 350 ROUGH-TERRAIN CRANE Technical description Chassis Drive/steer ade Frae Overall welded dual-girder structure, of high strength steel plate 5 Wheel and tire 4 wheels with 4 tires in the specification of 20.5R25VLT 2 Outrigger H-shaped arrangeent, full-hydraulic 6 Steering syste Adopting the all-hydraulic power steering control, and all outriggers capable of syste which is capable of in-situ separate action; quickly reovable outrigger steering. plate 3 Engine Aerican Cuins engine QSB6.7 Tier 3: rated power of 119kW at the speed of 7 24V Electric syste syste voltage, CAN bus 2500rp. Fuel tank: 300L in volue. 4 transission Transission syste The electric control hydro-echanical box is used.

7 SRC 350 ROUGH-TERRAIN CRANE PAGE 06 8 Axle Steering driving axle 10 parking Brake syste Dual loop all-hydraulic traveling brake, and brake through input flange of front axle. 9 Suspension syste Rigid connection of front axle, rear axle locked by pivot suspension oil cylinder. Hydraulic syste of lowerworks Quantitative gear oil pup is used to control the 11extension of level outrigger and vertical outrigger.

8 PAGE 07 SRC 350 ROUGH-TERRAIN CRANE Supersturcture 1 Control chaber It is arranged on one side of the turntable, and 4 Hydraulic syste of superstructure the overall structure is ade of corrosion resistant The axial piston variable pup under constant power steel plate, the sliding door design and large area control of loaded sensory control plus constant power inlaid type safety glass are adopted, providing control is used, capable of adjusting rate scale and a wide field of vision; using the ergonoic power adaptation, and it ay autoatically adjust the design, it is equipped with full-covered soft inner oil pup reasonably according to the load conditions, decoration, with adjustable seat, which enables thus utilizing power in a reasonable way. Not only the operator to work in a cofortable and easy does the rate control not depend on throttling, but way. also energy waste is reduced. 2 Boo 5 Main winch Synchronous telescoping lift ar in hexagonal Quantitative piston otor and hydraulic brake syste section; the telescoping echanis consists are equipped with balance valves; the ax. single- of a single cylinder and rope guide, and the rope rate is 140/in and the steel rope is 165 balance valve is installed on the cylinder. long. 3 Balance weight 6 Auxiliary winch 4T, suspended installation, fixed on the Quantitative piston otor and hydraulic brake turntable with bolt. syste are equipped with balance valves; the ax. single-rope rate is 140/in and the steel rope is 135 long.

9 SRC 350 ROUGH-TERRAIN CRANE PAGE 08 7 Deadweight Elevation dropping aplitude control Curve of the lifting height of SRC350 rough-terrain 8 Slewing device The slewing syste consisting of quantitative piston otor and decelerator features a ax. rotating speed of 2.7r/in. Lifting height () Boo length () 9 Safety device Color LCD displays the paraeters, including torque percentage, load of lift hook, rated load, ar length, angle, and lifting height, etc., in a centralized way; the setup of built-in load list and operation paraeters of the syste is under safety restriction and protection. Range ()

10 PAGE 09 SRC 350 ROUGH-TERRAIN CRANE Table of boo s lifting perforance fully extended outrigger 100% (Unit:kg) Table of SRC350 boo s lifting perforance fully extended outrigger 6.15 Operating range() Length of boo () Feet Meter

11 SRC 350 ROUGH-TERRAIN CRANE PAGE 10 Table of boo s lifting perforance sei-extended outrigger 50% (Unit:kg) Table of SRC350 boo s lifting perforance sei-extended outrigger 4.27 Operating range() Length of boo () Feet Meter Min. angle of elevation

12 PAGE 11 SRC 350 ROUGH-TERRAIN CRANE Table of boo s lifting perforance fully retracted outrigger 0% (Unit:kg) Table of SRC350 boo s lifting perforance _2.39 Operating range() Length of boo () Feet Meter Min. angle of elevation

13 SRC 350 ROUGH-TERRAIN CRANE PAGE 12 Table of boo s lifting perforance traveling under load (Unit:kg) Table of SRC350 boo s lifting perforance _ traveling under load _ right ahead Operating range() Length of boo () Feet Meter

14 PAGE 13 SRC 350 ROUGH-TERRAIN CRANE Table of boo s lifting perforance _ tire _ 360 slewing (Unit:kg) Table of SRC350 boo s lifting perforance _ tire _ 360 slewing Operating range() Length of boo () Feet Meter

15 SRC 350 ROUGH-TERRAIN CRANE PAGE 14 Table of jib s lifting perforance fully extended outrigger 100% (Unit:kg) Operating range() Installation angle of jib αa Operating range() Installation angle of jib αa Operating range() Min. angle of elevation Min. angle of elevation The values given in the table are the rated lifting capacities of the crane on an even and solid ground when the crane is in the leveling state. The values above the thick real line in the table are dependent on the strength of crane, and the values below the thick real line are dependent on the stability of crane. 2 The operating range in the table refers to the actual range after hoisting. 3 The values of rated loads depending on stability surely follow ISO The rated lifting capacity in the table includes the weight of lifting hook (the ain lifting hook weighs 360kg and auxiliary lifting hook 160kg) and hoisting tools. 5 If the actual boo length and range are between two values, the rated lifting capacity deterined by the longer boo and the larger range shall be selected for the lifting operation.

16 Address:Jinzhou developent,changsha,hunan,china Tel:(86) Fax:(86) Service hotline: Consulting line: Post code: Web: Sany reserves the right to aend these specifications at any tie without notice. Further technology details according to actual product!