Concept Air Seeding & Tillage System

Transcription

1 Concept 2000 Air Seeding & Tillage Syste

2 Flexibility and contourability is a tradeark of Morris floating frae design featuring independent wing sections. Floating frae sections, with a tricycle suspension and patented frae coupling assures flexibility while easing the stress on the frae eber joints. This allows the fraes to adjust to and follow the contours of the land. (Because of the unique floating frae design Morris does not recoend the use of echanical end arkers). The tricycle suspension is created through three support points on each frae. A dual castor centered between the walking bea axles give the tricycle suspension for the ainfrae. Siilarly, the centered gauge wheel, walking bea axle and ball joint pivots aintain the three point support on the wing fraes. Independent hitch trusses are used to pull the fraes. Stress induced by the trips is evenly distributed across the hitching, greatly extending the service life of the achine. Universal Ball Joint Floating frae design features independent wing sections. The Concept 2000 dual purpose syste proves invaluable to faring operations worldwide. Whether you require a heavy duty chisel plow to till soil, cut through residue, and leave an exceptional field finish or the accuracy of a precision air seeding syste, the Concept 2000 offers the best of both worlds. A standard feature of the Concept 2000 is the hydraulic and echanical depth control syste for seeding and tillage operations. This feature akes it easy to set achine depth with a convenient single point adjustent. The Hydraulic depth stop valves ensure consistent working depth by isolating the ipleent s hydraulics fro the tractor in tillage operations. It is recoended that the echanical depth stops are used when seeding. The Concept 2000 s parallel lift depth control syste keeps the achine level fro front to back, providing superior contouring for consistent seed depth. The syste provides excellent ground transport. A unique lifting linkage raises the front tire on the wing walking axles when turning on headlands. Lifting linkage prevents gouging and ridging for a soother field finish. Precision seeding syste doubles as heavy duty chisel plow ual Purpose Concept 2000 Seeding & Tillage Syste A ounted harrow option provides extra soil levelling for a soother field finish. Paired Row S25962 C Shank Paired Row ual Shoot Opener fits shanks with a 4.4 c (1 3/4 ) or 5.7 c (2 1/4 ) hole spacing. Replaceable chroe tip, with an optional carbide point is adjustable for wear and fertilizer placeent. The fertilizer depth is adjustable to 2, 3.8, or 5.7 c (3/4, 1 1/2, 2 1/4 ) below the seed rows ensuring separation. Seed is placed in two rows 7.6 c (3 ) apart. Seed spread is approxiately 2.5 c (1 ). Use in all soil conditions and with 8.9 c (3 1/2 ) ounted packer wheels. N c (9 ) spacing N c (12 ) spacing Cast boot adaptable to 22.8 c (9 ) or 30.5 c (12 ) spacing siply by exchanging a splitter that ounts behind the boot. General broadcast pattern. Seed spread is approxiately 10.2 c to 12.7 c (4-5 ). N10572 Seeding/banding boot can be used on all spacings offered. Excellent for banding fertilizer as the spread is very sall approxiately 5 c (2 ) to 7.6 c (3 ), reducing nitrogen losses. N10988 For 30.5 c (12 ) spacing but can be used on 22.8 c (9 ) and 25.4 c (10 ) spacing if 30.5 c (12 ) sweeps are installed. The seed is placed in a broadcast pattern with little row definition for excellent swath support. Seed spread is approxiately 10.2 c to 12.7 c (4-5 ). N22816 Can be used on all spacings offered and can be used for seeding or banding. Provides approxiately 11.4 c (4 1/2 ) seed spread directly behind the shank. N575 Can be used on all spacings offered and can be used for seeding or banding. Provides approxiately 7.6 c (3 ) to 10.2 c (4 ) seed spread directly behind the shank. Features an upper steel tube for better durability. Carbide Point Option The Carbide Point is designed to enhance the Morris Gubo Boot Kits (S25962). The Carbide Point s durability will increase the nuber of acres between point replaceent, resulting in less down tie and increased productivity during the critical seeding season. Less wear also ensures consistency of depth control. Anhydrous Option The application of anhydrous or liquid fertilizer is available with Morris double shoot openers. On conventional C shank openers the 1.27 c (1/2 ) poly tube inserts down the standard fertilizer tube providing a positive seal. Safe levels of actual nitrogen will vary with soil conditions at the tie of application. Consult your local agronoist for recoended levels in your area. Universal Ar with quick detach pin for changing packers and harrows. A Mounted packer option for on-row packing ensures excellent seed to soil contact. Note: For optiu placeent and iniu soil disturbance, seeding speed should not exceed 5.p.h. Soil oisture levels and soil types ay affect opener operation.

3 The Concept 2000 keeps you at work in the ost deanding trash conditions. The four row Z trip pattern allows trash to flow freely through the achine. To iprove trash clearance capabilities, the spacing between ranks increases fro 68.6 c (27 ) between the first and second rows to 78.7 c ( ) between the second and third, and to c (40 ) between the third and fourth. In cobination with the short contour length of the achine and the extra high ground clearance provided by the trip assebly, the increase in distance between ranks fro front to back provides superior perforance in heavy trash conditions. The Concept 2000 features three trip assebly options - the 755LH 340 (7 ) trip, 2 (5 ) and the 186 (400 ) trip. All Morris trips accept a variety of Morris seed and fertilizer boots, as well as other standard sweeps and spikes. The 755LH trip cobines the best features of spring cushion and over center trip asseblies. The trip is aintenance-free, requiring no greasing. The shank is held rigid in its hoe position. Rotational oveent of the pivot points is liited, resulting in inial wear on the bushings. The unique tripping characteristic reduces stress on the trip coponents and frae ebers. The new Morris 2 (5 ) trip features a 2.54 c (1 ) shank for extra durability. Hydraulic tyne option Trip out pressure can be increased or decreased on the go. Adjustable trip out force during hard pulling, trip out can be set higher to avoid unnecessary tripping. In rocky or obstacle laden fields, trip out force can be reduced in order to clear large solid obstacles. Higher durability recoil is uch softer with the hydraulic trip. Hydraulic pressure control to clear obstacles in the field, the farer can operate the tractor reote to decrease the syste pressure, and then increase the pressure back to the pre-set operating pressure once the obstacles have been cleared. A ball valve can be used to isolate the accuulator circuit once the pressure has been set. In this configuration trip out force reains set at one point, and can not be changed fro the tractor. The new Hydraulic tyne can be locked up for both storage & and spacing. For exaple, lock out every second tyne for suer cropping practices (allows farers with 38 c (15 ) spacing to suer crop on 76 c (30 ) spacing). The Concept has one of the shortest contour lengths in the industry - only 2.4 (96 ) and a true floating hitch to aintain consistent seeding or tilling depth over sharp knolls, hills and draws. The walking bea axles, placed near the rear of the frae, add another advantage. Even in the ost challenging conditions, the achine follows the terrain aintaining unifor depth across the entire achine. Optional ud scrapers are available for the inner tires to aid in wetter conditions. Single point safety latch. A 30.5 c (12 ) sweep to ground clearance in transport akes it easier to travel over high crowned roads. This clearance also provides access when changing openers. Weight is transferred to the front of the achine in transport position. This provides greater stability, even with the ounted packer or harrow option.

4 EIGHT Series XL precision air carts - ore capacity, ore features Tank sizes: 8,730 L (240 bu.) to 15,239 L (630 bu.) Tow between & tow behind configurations Overall width: 3.78 Overall height: EIGHT Series XL with quad steer. More capacity, user friendly features, precise etering and proven distribution - whether you are changing product or setting rates, the clean basic design and operation of the EIGHT Series XL Air Cart lets you siply and easily get on with the task at hand. EIGHT Series XL coplete with liquid tank option. As your cropping practices change, the EIGHT Series XL adapts right along with you. Stackable collectors allow quick and easy change over fro single to double shoot. Siply slide a rod to divert product fro one air strea into another. Spiral fluted etering wheels gently roll product into the air strea, accurately etering fine to coarse seed and fertilizer. Patented flat fan divider heads aintain the sooth horizontal flow of product as it leaves the priary runs to divide into the secondary runs. The abrupt directional change coon to vertical divider heads is eliinated. Outlets on the Flat Fan ivider are atched with etering wheel width for superior overall etering accuracy. All odels are equipped with a 25.4 c (10 ) auger for a fast fill. The walk-through tank design creates a fir standing platfor with fill lids at waist level Series air carts - field proven, easy to use Tank sizes: 6,5 L (180 bu) to 10,910 L (300 bu). Tow between & tow behind configurations. Loading auger: 17.8 c (7 ) on 7180 odels 20.3 c (8 ) on 7240 & 7300 odels. Spiral fluted etering wheels ove the product soothly into the air strea. 2-3 Meter Controlled Traffic Air Carts 7000 Air Carts feature walk through tank design. Very accurate seed & fertilizer calibration. Single, double shoot capability. High efficiency fan. The Posi-rive Transission uses a positive lock on all drive sprockets to deliver sooth and reliable etering. The positive ground drive fro the Air Cart wheel ensures precise product rates at all ties. The high efficiency air syste design and 13 diaeter fan provide a low horsepower draw fro the tractor hydraulics.

5 Morris Concept 2000 Specifications and Options Base Ext'd Model Model Working Width Nuber of Shanks Width Transport Height Weight with 755 LH Trip 12" 9 " 12" 9 " 12" 9 " 12" 9" 30.5 c 25.4 c 22.9 c 30.5 c25.4 c22.9 c 30.5 c 25.4 c 22.9 c 30.5 c 25.4 c 22.9 c 3 Section: Regular Transport 23.5' 1" 11,575 12,665 12, ,261 5,757 5,593 26' 12,045 13,190 12, ,475 5,995 5,807 ' '.5' 6" 13,180 13,945 14, ,991 6,9 6,4 6" 6" 13,6 14,470 14, ,205 6,577 6,627 ' ' 6" 16' 4" 14,230 15,095 15, ,468 6,861 6,889 3 Section: Wide Transport 32' 32' 6" 14,0 14,910 15, ,391 6,777 6,832 6" 6" 14,530 15,5 15, ,5 7,016 7, ' 35.5' 6" 16' 4" 15,110 16,0 16, ,868 7,300 7,307 38' 38' ' 38.5' 2" 1" 15,190 16,185 16, ,905 7,357 7, ' 2" 11" 15,6 16,710 16, ,118 7,595 7,639 42' 42' 44'.5' 2" 9" 16,240 17,5 17, ,382 7,880 7,900 5 Section ' 54'.5' 3" 22,855 24,385 24, ,389 11,084 11,107 ' ' ' 3" 23,325 24,910 24, ,2 11,323 11,320 ' 61'.5' 3" 23,425 25,180 25, ,648 11,445 11,2 ' ' 3" 23,895 25,705 25, ,861 11,684 11,645 ' 64' 59.5' 3" 24,475 26,0 26, ,125 11,968 11,907 Trip Mechanis Overall Length Frae epth Rows 400 Spring Cushion 5 Spring Cushion 755 LH Autoatic Trip Hydraulic Trip 26' (7.93 ) on all 102" (2.59 ) on all 4 Rows on all 1" (2.54 c) x 2" (5.1 c) Shank with 1-3/4" (4.4 c) Centres fits 47 egree tillage tools. 2 (68.6 c) Sweep to Frae Clearance. Trip Force 400 (180 ). Available on 9" (22.9 c) and (25.4 c) spacing. 1" (2.54 c) x 2" (5.1 c) Shank with 1-3/4" (4.4 c) Centres fits 47 egree tillage tools. 2 (68.6 c) Sweep to Frae Clearance. Trip Force 5 (248 ). Available on 9" (22.9 c), (25.4 c) and 12" (30.5 c) spacing. 1-1/4" (3.18 c) x 2" (5.1 c) Shank with 2-1/4" (5.72 c) Centres fits egree tillage tools. 30" (76.2 c) sweep to Frae Clearance. Trip Force 7 (340 ). Available on 9" (22.9 c), (25.4 c) and 12" (30.5 c) spacing. 1-1/4" (3.18 c) x 2" (5.1 c) Shank with 2-1/4" (5.72 c) Centres fits egree tillage tools. 30" (76.2 c) sweep to Frae Clearance. Trip Force adjustable s (68-8 ). Available on 9" (22.9 c), (25.4 c) and 12" (30.5 c) spacing. S tandard Safety Lights, Safety Chain Options Mud Scrapers, Mounted Packers, and Mounted Harrow s Base Model Ext'd Model Tire - I Tire - Tire - I Main Frae 3.66 FRAME CONFIGURATIONS ' 1.83 Inner Wings 9' Outer Wings 6' ' 2.74 TIRE CONFIGURATIONS - OPTIONAL Main Frae Wing Frae Main Frae Wing Frae Main Frae Wing Frae (4) 9.5L x 15FI Load Range Extensions 2 4 Shank Shank Tires (2 per frae) 9.5L x 15FI Load Range (2) 9.5L x 15FI Load Range (1 per frae) 9.5L x 15FI Load Range (4) 11L x 15FI Load Range (2 per frae) 9.5L x 15FI Load Range (2) 11L x 15FI Load Range (1 per frae) 11L x 15FI Load Range (4) 11L x 15FI Load Range (2 per frae) 9.5L x 15FI Load Range (2) 11L x 15FI Load Range (1 per frae) 11L x 15FI Load Range F F See Below I I I I I I I PRINTE IN CANAA CORPORATE OFFICE & TRAINING CENTRE - 21 Airport rive, Saskatoon, SK Canada S7L 7E1 Telephone: Fax: Questions? eail: info@orris-industries.co The policy of MORRIS INUSTRIES LT. is one of continuing iproveent; therefore, the copany reserves the right to change specifications without notice.