The Irrigation Innovators

Transcription

1 The Irrigation Innovators

2 The MP Rotator Setting the Standard for Water Efficiency High Unifority Precision-engineered streas provide excellent coverage and superior wind resistance Low Precipitation Rate Reduces runoff on slopes and tight soils Flexible Design Tool Fro 1.2 to spacing any odels can be cobined on the sae zone Autoatic Matched Precipitation Even after arc and radius adjustent Proven Durability and Reliability Rotator technology proven since 187 in the agricultural arket Quick, Easy Arc and Adjustents Fast installation no nozzles to change

3 The One and Only The MP Rotator is a ultistrea rotor like no other. It installs on the Hunter Pro-Spray and MPR40 bodies, giving you the versatility your project needs. What akes the MP Rotator so special? It is in the MP true atched precipitation that is. Any cobination of the any rotators you see on the right can operate in conjunction with one another, giving you ultiate flexibility you siply can't duplicate with any other product. 1 MPR40 Key Features Built-in the ste 1 regulator set at 2.6 bars New easy-to-identify gray cap Pressure-wactivated, ultifunction, no flow-by wiper seal Two-piece ratcheting riser for quick arc alignent Factory-installed drain check valve The MPR40 and The MP Rotator A Perfect Cobination Designing and working with the MP Rotator gave us the opportunity to ake it even better. How? We did this by deterining its optial operating pressure. The end result: The MPR40. As the nae suggests, we calibrated the MPR40 to provide the MP Rotator with a consistent 2.6 bars. Even ore, we've added a new gray-colored body cap for easy identification. Together, the two are a true blend of technology and perforance. In fact, the MPR40 is the only product of its kind. Discover the MPR40. Paired with the MP Rotator, it s a partnership that perfors. The MPR40 Sprinkler Body: Four odels available: c (4"), 15 c (6"), and 30 c ("). Shrub odel not shown

4 Design By Models MP00 (Feale Thread) & MP00HT (Male Thread) Range 2.4 to including all pressure and radius adjustent influence Pressure Range 2.1 to bars Low trajectory, perfect for saller areas For iniu radius, install on a 2.1 bars regulated Institutional Spray body MPCorner (Feale Thread) & MPCornerHT (Male Thread) Range 2.4 to Pressure Range 2.1 to bars Designed for application in areas with less than 0 degrees of arc area necessary Does not require adjacent sprinklers to reach into the first 0. to 1.5 of coverage MP2000 (Feale Thread) & MP2000HT (Male Thread) Range to including all pressure and radius adjustent influence Pressure Range 1.7 to bars rate is about 1/3 of a spray head; and yet has greater radius and higher unifority For iniu radius, install on a 2.1 bars regulated Institutional Spray body MPLCS515 (Feale Thread) & MPLCSHT515 (Male Thread) Pressure Range 2.1 to bars Matched precipitation even after radius reduction with head to head spacing Can be used on the sae zone with the MP00, MP2000 or MP3000 and still aintain atched precipitation Adjustable right edge MP3000 (Feale Thread) & MP3000HT (Male Thread) Range 6.7 to including all pressure and radius adjustent influence Pressure Range 2.1 to bars rate is about the sae as a spray head; and yet has greater radius and higher unifority For iniu radius, provide adjustable zone pressure regulation; Installation on a 2.1 bars pressure regulated Institutional Spray body is not recoended if radius reduction is needed For axiu radius, provide pressures over 2.6 bars -coded for easy identification, the MP Rotator is the perfect solution for water efficiency. The MP Rotator is easy to install and a breeze to adjust. MPSS530 (Feale Thread) & MPSSHT530 (Male Thread) Pressure Range 2.1 to bars Matched precipitation even after radius reduction with head to head spacing Can be used on the sae zone with the MP00, MP2000 or MP3000 and still aintain atched precipitation Adjustable right edge to fit curved strips MPRCS515 (Feale Thread) & MPRCSHT515 (Male Thread) Pressure Range 2.1 to bars Matched precipitation even after radius reduction with head to head spacing Can be used on the sae zone with the MP00, MP2000 or MP3000 and still aintain atched precipitation Edges are fixed

5 Maintain Matched Precipitation Any Model, Any Arc, Any Adjustable Adjustable Arc MP00 All odels of the MP Rotator allow for easy radius adjustent of up to 25% while aintaining autoatic atched precipitation. 0º to 2º 2º to 270º 360º MP MP MP Strea Height at 2 bars = 0.4 MP Maroon MP Light Blue MP Olive MP Strea Height at 2 bars = 1 Black Green Red MP3000 Strea Height at 2.8 bars = 2 MP MP MP Blue Yellow Gray MP Corner Strea Height at 2 bars = The MP Corner is designed for tight corners that are difficult to irrigate properly with conventional sprinklers. It has an adjustable arc fro 45 to 5, aintains MPR at any arc, any radius and can be placed on the sae zone with any other MP Rotator odel. MPCorner Turquoise 45º to 5º MP00 radius reduced to 2.7 No overlap needed first 0.. ' MP Corner at full radius 45º MP00 radius reduced to 2.7 MP Strip Exaple with triangular spacing. MP Side Strip MP Side Strip MPLCS-515 (Left Strip) MPSS-530 (Side Strip) MPRCS-515 (Right Strip) MP Left Strip MP Side Strip MP Right Strip The three MP Strip odels of the MP Rotator faily offer an exciting alternative to irrigate strip areas. Strip odels offer iproved unifority and excellent wind-fighting ability. The reduced flow rate copared to conventional sprays akes longer runs and/or fewer zones possible. Ivory Brown Copper

6 SPECIFICATIONBUILDER MODEL MP00 MP2000 MP3000 MPCORNER MPLCS515 MPRCS515 MPSS530 MP FEATURES 0 = 0 to 2 2 = 2 to = 360 EXAMPLE MP2000* 0 MP Rotator Perforance Data Metric MP00 : 2.5 to Adjustable Arc and Full Circle Code: Maroon, Lt. Blue, or Olive Arc Pressure Bars kpa Maroon = 0º to 2º Lt. Blue = 2º to 270º Olive = 360º * Add HT to specify ale thread. MP Rotators are designed to operate in conjuction with a pop-up sprinkler or shrub sprinkler Precip /hr 14 MP2000 : 4 to Adjustable Arc and Full Circle Code: Black, Green, or Red Black = 0º to 2º Green = 2º to 270º Red = 360º SPECIFICATIONBUILDER MODEL FEATURES OPTIONS MPR40 = MPR40 (Includes factory-installed 2.75 bar pressure regulator) Precip /hr MP3000 : 6.7 to Adjustable Arc and Full Circle Code: Blue, Yellow, or Gray Blue = 0º to 2º Yellow = 2º to 270º Gray = 360º 00 = Shrub 04 = c (4 ) Pop-up 06 = 15 c (6 ) Pop-up = 30 c ( ) Pop-up CV = Factory-installed check valve CV-R = (Pop-up odels only) Factory-installed reclaied body cap Precip /hr MP ROTATORS See MP Rotator Specification Guide for details MPR40 04-CV MP20000 EXAMPLE MPR40 04-CV MP20000 Charts and Specs MP Rotator Perforance Data Metric MP Corner : 2.4 to Arc Pressure Bars kpa Adjustable Arc Code: Turquoise Turquoise = 45º to 5º MP Rotator Perforance Data Metric MPLCS515 MPRCS515 MPSS530 Nozzle Model MP Left Strip MP Right Strip MP Side Strip Pressure Bars kpa Ivory Copper Brown Width x Length 1.2 x 1.8 x x x 1.8 x x x 1.5 x 1.5 x 1.5 x 1.8 x x Note: Strip pattern radius can be adjusted by 25%. MP Rotator is designed to aintain atched precipitation after radius adjustent INT-62 B /0 Hunter Industries Incorporated 140 Diaond Street, San Marcos, California 2078 USA