Salford Group Inc. American Whole Goods Price Book. Effective October 24, 2016

Transcription

1 Salford Group Inc. American Whole Goods Price Book Effective October 24,

2 Intentionally Blank 2

3 Product Index Secondary Tillage Primary Independent Series Harrows Click a page title to navigate to that page. Suggested Setup Rates 6 Freight Rates 7 CULTIVATORS S-Tine Cultivator, 4 Spacing 10 S-Tine Cultivator, 5 Spacing 12 2 pc S-Tine Cultivator, 4.5" Spacing 14 C-Shank Cultivator, 7 Spacing 16 C-Shank Cultivator, 9 Spacing 18 IN-LINE RIPPER 9200 In-Line Ripper 20 MOLDBOARD PLOWS 6200 Hydraulic Vary-Width Plow Tandem Flex Trail Plow Moldboard Plow 26 INDEPENDENT SERIES I " spacing 29 Coil-Tech I - 1 1/4" spring I SWITCHBLADE 1,300lb Hydraulic Shanks Attachments for Fertilizer or Tillage 32 I " spacing 35 I SWITCHBLADE 1,300lb Hydraulic Shanks Attachments for Fertilizer or Tillage 38 Coil-Tech II I " spacing /8" spring I SWITCHBLADE 1,300lb Hydraulic Shanks Attachments for Fertilizer or Tillage 44 I " spacing 47 I SWITCHBLADE 1,300lb Hydraulic Shanks Attachments for Fertilizer or Tillage 50 HD Rubber Suspension & I-4100 (22" Concave &Wavy Coulters, 7.5" spacing) 53 Coil Tech II I-4200 (22" Concave &Wavy Coulters, 5" spacing) 57 HD Rubber I-5100 (All 22"Concave blades, 5' spacing) 61 Suspension ATTACHMENTS Coil Tech Coulters I and II - Individual 1 1/4" and 1 5/8" Spring Coulter Mount 66 I-Series Broadcast Seed and Fertilizer Attachment 68 HARROWS Harrow Attachments Pricing 70 PATHFINDER 8-Ton & 10-Ton 74 ST-SERIES ST-6 82 ST-8 84 ST Accessories 88 3

4 Intentionally Blank 4

5 Intentionally Blank 5

6 DEALER SUGGESTED SETUP RATES NOTE: Assembly charges are based on the machine model size. Not all models can be shipped fully assembled or as sub-assembly. IF MACHINE IS SHIPPED AS A SUB-ASSEMBLY, THERE WILL BE SET UP FEES Machine Type Assembly charge (Dealer Net)*** Additional charge - Hydraulic Harrows per Option Est. Assembly time Notes Cultivators $ 70 per foot N/A 1 hr./ft. Includes standard harrow attachment I-1200, I-2200, I-4200 ( 5" Spacing) $115 per foot $20 per foot/each option 1.5 hr./ft Includes standard harrow attachment I-1500 Strip Till $ 115 per foot $20 per foot 1.5 hr./ft Includes standard harrow attachment I-1100, I-2100, I-4100 (7.5" Sacing) $ 100 per foot I-5100 $ 140 per foot $20 per foot/each option $20 per foot/each option 1.3 hr./ft. Includes standard harrow attachment 2 hr./ft PathFinder $400 flat rate 4 hr. ST-Series Air Cart $20/ftBroadcast $50/row Banding Optional Equipment other than Harrows Hydraulic Shank 1300lb NH3 or Chisel Shank On Independent Series Rear Tow Hitch Seeding/Fertilizer Attachment for Coil Tech Broadcast Seeding system Optional Factory Partial Set-up All Models NOTE: excluding I-5100 I-5100 $115 per Shank $125 with Top Brace $30 per unit, $100 per Seed Tower $20 per unit, $100 per Seed Tower Towable sub-assembly $350 Partial Assembly under 12' $75 per foot Includes standard harrow attachment Note: Shank kits not available for I-5100 NA Add 1 hour for per Set of hydraulic lines for Rear hitch NA NA Install tongue and wheels on Main Frame only 12' - Does not include harrow attachment 16' - Can ship fully assembled as a wide load under 12' 19', 22', 25' & 29' - No blades or tires on wings, no rolling harrows 36' - 42', must be shipped as a bundle 6

7 FREIGHT RATES Salford's freight rates for each dealer are based on an average cost calculated from between our manufacturing facilities. In all cases, this is our most equitable system for calculating shipping costs and putting dealers on a more level playing field with their neighboring dealer group. Freight rates are available online, by calling your Salford territory manager, or by calling Salford inside sales and technical support at Freight Rate: (per machine) (Record your rate here for quick reference) Notice: - Please quote every machine with your set rate. Whenever possible Salford will combine loads for multiple Salford machines that will fit on one load. In those cases, a prorated freight rate will be applied to your invoice. - Freight will not be applied to PRE-PAID invoices. Freight charges will be billed when units are shipped. Additional Fees: - Add $300 for oversized loads - Add $500 for direct shipments and/or redirection of load to a location other than an authorized dealer or dealer set-up location. Subject to Salford approval. Terms and Conditions: 1. All freight charges will be billed as net. 2. Dealer will retain right to arrange for own shipping at pickup point advised by Salford 3. Freight rates only apply when Salford arranges for the carrier 4. Standard rates ONLY apply if shipped to authorized Dealers or approved Dealer setup locations 5. Rates are subject to change without notice. 7

8 Intentionally Blank 8

9 Intentionally Blank 9

10 S-TINE FIELD CULTIVATOR 4 Tine spacing with 3 Long Life Cast Point 20" under frame clearance 110 lbs 200 lbs operating pressure (S-Tine tip pressure varies during operation as the tine vibrates in the soil). 6 Bar Frame, 4 Spacing Model Size Base Price # of Tines 2 bar 3/8 Tine & Double 11" Roller HARROW ATTACHMENTS 3 bar 1/2" HD Tine 3 bar HD 1/2 Tine with Single 11" Roller 450 Series - 6 bar Frame, 4 Spacing 3 bar HD 1/2 Tine with Single 14 Roller Trans. Width Trans. Height Approx. weight without harrows (lbs) 12' $15, $21,489 $18,466 $20,843 $21,515 12'4 4'10 4,100 17' $23, $32,518 $28,234 $31,602 $32,554 12'9 10'9 5,600 19' $26, $36,005 $31,218 $34,983 $36,046 12'9" 11'5" 6,000 21' $26, $37,703 $32,412 $36,572 $37,748 12'9 12'3 6,200 23' $27, $39,673 $33,878 $38,435 $39,722 12'9 13' 6,500 25' $28, $41,370 $35,071 $40,024 $41,424 12'9" 13'8" 6, Series - 6 bar Frame, 4 Spacing 28' $34, $49,199 $42,144 $47,692 $49,259 15'3" 12'10" 9,000 30' $35, $51,315 $43,756 $49,700 $51,379 16'4" 14'2" 9,150 32' $36, $53,436 $45,373 $51,713 $53,504 18'4 13'10 9,800 40'** $49, $70,423 $60,345 $68,269 $70,509 18'11" 12'3" 12, Series - 6 bar Frame, 4 Spacing 44'** $59, $81,969 $70,883 $79,600 $82,064 18'11" 14'4" 13,900 50'** $62, $87,921 $75,324 $85,229 $88,029 18'11" 14'4" 14,900 62'** $80, $112,843 $97,222 $109,505 $112,976 20'11" 15'6" 20,200 ** Bi - Fold Wing 5-6 HP per foot (approx.) See page 70 for harrow weights (approx. lbs/ft) SPECIFICATIONS STANDARD FEATURES (ALL MODELS): 4 x 6 Main beam with 2 1/2 Tine bar Hydraulic self-leveling frame Single point depth control Individual wheel height adjuster Safety chain, SMV sign, Safety lights Tires on Wings & Gauge wheels: 6-bolt 11L x 15 C range Tandem wheels on Main Frame and Wings Single wheels on wings (17' model only) Extended rear parking stand 10

11 S-TINE FIELD CULTIVATOR 4 Tine spacing with 3 Long Life Cast Point 450 STANDARD FEATURES: OPTIONS: Tires on Main Frame: 6 bolt 11L x 15 load range C" Land Hugger floating frame with manual adjust caster wheels Cast hitch cat. III with clevis adapter (Land Hugger option not available on sizes 12' - 32') -40' - 44' 11L x 15 Load Range C $4, STANDARD FEATURES: -50' 11L x 15 Load Range C $6,567 Manual adjustable gauge wheels on primary wing only -62' 11L x 15 Load Range C $7,500 Category III Hitch with bolt in adapter or Deduct: Extended rear parking stand -$525 Category IV single clevis (please specify when ordering) Adjustable tow hitch (One man hook-up) $1,392 Tires on Main Frame: 28' - 32' - 6-bolt 11L x 15 load range F - Includes lighting connection for trailing implement 40' - 8-bolt 12.5 x 15 Highway service load range F Add Tow Hitch Top Brace $514 - add tow hitch top brace for increased towing capacity 700 STANDARD FEATURES: Hydraulic lines and quick coupler to tow hitch Manual adjustable gauge wheels on primary wing only (44') - from tractor remotes $440 Manual adjustable gauge wheels on both wings (50' & up) Category 4 Single clevis Hitch Main Frame Tires - 44', 50', 62' - 8-bolt 340/60 R

12 S-TINE FIELD CULTIVATOR 5 Tine spacing with 3 Long Life Cast Point 20" under frame clearance 110 lbs 200 lbs operating pressure (S-Tine tip pressure varies during operation as the tine vibrates in the soil). 6 bar Frame, 5 Spacing HARROW ATTACHMENTS SPECIFICATIONS Model Size Base Price # of Tines 2 bar 3/8 Tine 3 bar HD 1/2 3 bar HD 1/2 & 3 bar 1/2" HD Tine with Single Tine with Single Double 11" Tine 11" Roller 14 Roller Roller Trans. Width Trans. Height 450 Series - 6 bar Frame, 5 Spacing Approx. weight without Harrows (lbs) 25' $28, $41,370 $35,071 $40,024 $41,424 12'9" 13'8" 6, Series - 6 bar Frame, 5 Spacing 28' $33, $48,192 $41,138 $46,685 $48,252 15'3" 12'10" 9, $34, $50,211 $42,653 $48,596 $50,276 16'4" 14'2" 9, $35, $52,201 $44,139 $50,479 $52,270 18'4 13'10 9,800 40'** $47, $67,874 $57,796 $65,720 $67,960 18'11" 12'3" 12, Series - 6 bar Frame, 5 Spacing 44'** $57, $80,038 $68,952 $77,669 $80,133 18'11" 14'4" 13,900 50'** $59, $85,693 $73,096 $83,001 $85,801 18'11" 14'4" 14,900 62'** $77, $109,281 $93,660 $105,943 $109,414 20'11" 15'6" 20,200 ** Bi - Fold Wing 5-6 HP per foot (approx.) See page 70 for harrow weights (approx. lbs/ft) STANDARD FEATURES (ALL MODELS): 4 x 6 Main beam with 2 1/2 Tine bar Hydraulic self-leveling frame Single point depth control Individual wheel height adjuster Safety chain, SMV sign, Safety lights Tires on Wings & Gauge wheels: 6-bolt 11L x 15 load range C Tandem wheels on Main Frame and Wings Extended rear parking stand 12

13 S-TINE FIELD CULTIVATOR 5 Tine spacing with 3 Long Life Cast Point 550 STANDARD FEATURES: OPTIONS: Manual adjustable gauge wheels on primary wing only Land Hugger Floating Frame with manual adjust caster wheels Category III Hitch with bolt in adapter or (Land Hugger option not available on sizes 12' - 32') Category IV single clevis (please specify when ordering) -40' - 44' 11L x 15 Load Range C $4,575 Tires on Main Frame: 30' - 6-bolt 11L x 15 load range F -50' 11L x 15 Load Range C $6,567-40' - 8-bolt 12.5 x 15 Highway service load range F -62' 11L x 15 Load Range C $7,500 Deduct: Extended rear parking stand -$ STANDARD FEATURES: - Recommended for machines with rolling harrow packages Manual adjustable gauge wheels on primary wing only (44') adjustable tow hitch (One man hook-up) $1,392 Manual adjustable gauge wheels on both wings (50' & up) - Includes lighting connection for trailing implement Category 4 Single clevis Hitch Add Tow Hitch Top Brace $514 Main Frame Tires - 44', 50', 62' - 8-bolt 340/60 R16.5 Radial Implement Tire - Add tow hitch top brace for increased towing capacity Hydraulic lines and quick coupler to tow hitch - from tractor remotes $440 13

14 2 PIECE S-TINE FIELD CULTIVATOR 4.5 Tine spacing with 4 Long Life Cast Point 26" under frame clearance 110 lbs 200 lbs operating pressure (S-Tine tip pressure varies during operation as the tine vibrates in the soil). 6 bar Frame, 4.5 Spacing HARROW ATTACHMENTS SPECIFICATIONS Model Size Base Price # of Tines 2 bar 3/8 Tine & Double 11" Roller 3 bar 1/2" HD Tine 3 bar HD 1/2 Tine with Single 11" Roller 3 bar HD 1/2 Tine with Single 14 Roller Trans. Width Trans. Height Approx. weight without Harrows (lbs) 19' $31, $41,376 $36,589 $40,353 $41,417 12'9" 11'5" 7,700 21' $32, $43,281 $37,990 $42,150 $43,326 12'9" 12'3" 7,900 23' $33, $45,187 $39,392 $43,948 $45,236 12'9" 13' 8,300 25' $34, $46,939 $40,640 $45,593 $46,993 12'9" 13'8" 8, Series - 6 bar Frame, 4.5 Spacing 30' $41, $57,291 $49,732 $55,676 $57,355 16'4" 14'2" 9,725 40'** $57, $77,709 $67,631 $75,555 $77,795 18'11" 12'3" 13, Series - 6 bar Frame, 4.5 Spacing 44'** $67, $90,453 $79,367 $88,084 $90,548 18'11" 14'4" 15,980 50'** $71, $97,527 $84,930 $94,835 $97,635 18'11" 14'4" 17,710 62'** $92, $124,289 $108,668 $120,951 $124,423 20'11" 15'6" 21,500 ** Bi - Fold Wing 5-6 HP per foot (approx.) See page 70 for harrow weights (approx. lbs/ft) STANDARD FEATURES (ALL MODELS): 4 x 6 Main beam with 2 1/2 Tine bar Hydraulic self-leveling frame Single point depth control Individual wheel height adjuster Safety chain, SMV sign, Safety lights Tires on Wings & Gauge wheels: 6-bolt 11L x 15 load range C Tandem wheels on Main Frame and Wings Extended rear parking stand 450 Series - 6 bar Frame, 4.5 Spacing 14

15 2 PIECE S-TINE FIELD CULTIVATOR 4.5 Tine spacing with 4 Long Life Cast Point 450 STANDARD FEATURES: OPTIONS: Tires on Main Frame: 6 bolt 11L x 15 load range C" Land Hugger Floating Frame with manual adjust caster wheels Cast hitch cat. III with clevis adapter (Land Hugger option not available on sizes 12' - 32') -40' - 44' 11L x 15 Load Range C $4, STANDARD FEATURES: -50' 11L x 15 Load Range C $6,567 Manual adjustable gauge wheels on primary wing only -62' 11L x 15 Load Range C $7,500 Category III Hitch with bolt in adapter or Deduct: Extended rear parking stand -$525 Category IV single clevis (please specify when ordering) - Recommended for machines with rolling harrow packages Tires on Main Frame: 28' - 32' - 6-bolt 11L x 15 load range F adjustable tow hitch (One man hook-up) $1,392-40' - 8-bolt 12.5 x 15 Highway service load range F - Includes lighting connection for trailing implement Add Tow Hitch Top Brace $ STANDARD FEATURES: - Add tow hitch top brace for increased towing capacity Manual adjustable gauge wheels on primary wing only (44') Hydraulic lines and quick coupler to tow hitch Manual adjustable gauge wheels on both wings (50' & up) - from tractor remotes $440 Category 4 Single clevis Hitch Main Frame Tires - 44', 50', 62' - 8-bolt 340/60 R16.5 Radial Implement Tire 15

16 C-SHANK FIELD CULTIVATOR 7 Shank spacing with 7 sweeps lbs tip pressure, 26" under frame clearance 6 Bar Frame, 7 Spacing HARROW ATTACHMENTS SPECIFICATIONS Model Size Base Price # of Tines 3 bar 1/2" HD Tine 3 Bar HD 1/2 Tine with Single 11" Roller 3 Bar HD 1/2 Tine with Single 14 Roller Trans. Width Trans. Height Approx. weight without Harrows (lbs) 450 Series - 6 Bar Frame, 7 Spacing 12' $18, $22,396 $24,773 $25,445 13' NA 4,400 17' $25, $30,802 $34,170 $35,121 12'9" 10'9" 6,300 19' $29, $35,094 $38,859 $39,922 12'9" 11'5" 6,800 21' $30, $36,488 $40,648 $41,824 12'9" 12'3" 7,000 23' $31, $37,882 $42,439 $43,726 12'9" 13'0" 7,300 25' $31, $39,132 $44,085 $45,485 12'9" 13'8" 7, Series - 6 Bar Frame, 7 Spacing 28' $37, $45,819 $51,367 $52,934 15'10" 12'10" 10,200 30' $39, $47,866 $53,809 $55,489 16'4" 14'2" 10,300 32' $40, $49,838 $56,178 $57,970 18'4 13'10 11,100 40'** $54, $65,689 $73,614 $75,854 18'11" 12'3" 14, Series - 6 Bar Frame, 7 Spacing 40' $46, $57,991 $65,916 $68,156 20'2 15'10 11,100 44'** $63, $75,953 $84,670 $87,133 18'11" 14'4" 15,700 50'** $66, $81,279 $91,184 $93,984 18'11" 14'4" 16,800 62'** $86, $104,293 $116,576 $120,047 20'11" 15'6" 22,800 ** Bi - Fold Wing 5-6 HP per foot (approx.) See page 70 for harrow weights (approx. lbs/ft) STANDARD FEATURES (ALL MODELS): 4 x 6 Main beam with 2 1/2 Tine bar Hydraulic self-leveling frame Single point depth control Individual wheel height adjuster Safety chain, SMV sign, Safety lights Tires on Wings & Gauge wheels: 6-Bolt 11L x 15 C range Tandem wheels on Main Frame and Wings Single wheels on wings (17' model only) 62' 11L x 15 "D" on Primary Wing Extended rear parking stand 16

17 C-SHANK FIELD CULTIVATOR 7 Shank spacing with 7 sweeps 450 STANDARD FEATURES: OPTIONS: Tires on Main Frame: 6 Bolt 11L x 15 C' Land Hugger Floating Frame with manual adjust caster wheels Cast hitch cat. III with clevis adapter (Land Hugger option not available on sizes 12' - 32') -40' - 44' 11L x 15 Load Range C $4, STANDARD FEATURES: -50' 11L x 15 Load Range C $6,567 Manual adjustable gauge wheels on primary wing only (40' only) -62' 11L x 15 Load Range C $7,500 Category III Hitch with bolt in adapter or Deduct: Extended rear parking stand -$525 Category IV single clevis (please specify when ordering) - Recommended for machines with rolling harrow packages Tires on Main Frame: 28' & 32' - 6-Bolt 11L x 15 load range F Adjustable tow hitch (One man hook-up) $1,392 40' - 8-bolt 12.5 x 15 Highway service load range F and tow hitch top brace for increased towing capacity Add Tow Hitch Top Brace $ STANDARD FEATURES: - Add tow hitch top brace for increased towing capacity Manual adjustable gauge wheels on primary wing only (40' and 44') Hydraulic lines and quick coupler to tow hitch Manual adjustable gauge wheels on both wings (50' & up) - from tractor remotes $440 Category 4 Single clevis Hitch 7" Sweeps if not required Deduct $7.76 ea Main Frame Tires - 40' -8-bolt 12.5x15 Hwy service load range F - 44', 50', 62' - 8-bolt 340/60 R

18 C-SHANK FIELD CULTIVATOR 9 Shank spacing with sweeps lbs tip pressure, 26" under frame clearance 6 Bar Frame, 9 Spacing HARROW ATTACHMENTS SPECIFICATIONS Model Size Base Price # of Tines 3 Bar HD 1/2 3 Bar HD 1/2 3 bar 1/2" HD Tine with Single Tine with Single Tine 11" Roller 14 Roller Trans. Width Trans. Height 700 Series - 6 Bar Frame, 9 Spacing Approx. weight without Harrows (lbs) 40' $44, $55,782 $63,706 $65,946 20'2 15'10 11,100 44'** $60, $73,042 $81,759 $84,222 18'11" 14'4" 15,700 50'** $63, $77,989 $87,895 $90,695 18'11" 14'4" 16,800 62'** $82, $100,369 $112,652 $116,124 20'11" 15'6" 22,800 ** Bi - Fold Wing 5-6 HP per foot (approx.) See page 70 for harrow weights (approx. lbs/ft) STANDARD FEATURES (ALL MODELS): 4 x 6 Main beam with 2 1/2 Tine bar Hydraulic self-leveling frame OPTIONS: Land Hugger Floating Frame with manual adjust caster wheels (Land Hugger option not available on sizes 12' - 32') Single point depth control -40' - 44' 11L x 15 Load Range C $4,575 Individual wheel height adjuster -50' 11L x 15 Load Range C $6,567 Safety chain, SMV sign, Safety lights -62' 11L x 15 Load Range C $7,500 Tires on Wings & Gauge wheels: 6-Bolt 11L x 15 C range Deduct: Extended rear parking stand -$525 Tandem wheels on Main Frame and Wings - Recommended for machines with rolling harrow packages 62' 11L x 15 "D" on Primary Wing Adjustable tow hitch (One man hook-up) $1,392 Extended rear parking stand - Includes lighting connection for trailing implement Add Tow Hitch Top Brace $ STANDARD FEATURES: - Add tow hitch top brace for increased towing capacity Manual adjustable gauge wheels on primary wing only (44') Hydraulic lines and quick coupler to tow hitch Manual adjustable gauge wheels on both wings (50' & up) - from tractor remotes $440 Category 4 Single clevis Hitch No Sweeps Deduct -$14 Main Frame Tires: - 40' - 8-bolt 12.5x15 Hwy serv. load range F - 44', 50', 62' - 8-bolt 340/60 R

19 Intentionally Blank 19

20 9200 In-Line Ripper 3 Point hitch mounted 30 SHANK SPACING Model # of Shanks # of Gauge Wheels Spring Reset Model $12, $15, $18, $23, $27, HP per shank (approx.) Straight Ripper Shank STANDARD FEATURES: 6 x 6 Double frame design for years of dependable performance 4000lb spring trip auto reset pressure (includes 3rd spring assist) Reversible shin guard Trip height of 16 Salford Coil-Tech spring coulter with 20 rippled blades Under frame clearance of 39 Category II / III hitch Reversible Pins Gauge wheels - 11L x 15 tires D Range HARDWARE OPTION: * Only one style of point included. Dealer must choose either/or at time of order Narrow Spring Point Choice* Safety Lights $

21 Intentionally Blank 21

22 6200 MOLDBOARD PLOW Semi Mounted, Hydraulic Variable Width, In-Furrow Model Size Double Spring Auto Reset Approx Weight (lbs) Furrow $24,141 4, Furrow $28,739 5, Furrow $34,744 7, Furrow $40,167 8, HP per bottom (approx.) STANDARD FEATURES: Hydraulically adjustable furrow width, 12" - 20" Hydraulic steering Over 35 of Under-Frame Clearance Fore-aft Clearance Rippled Spring Loaded Coulters Auto Reset Shanks / Adjustable trip pressure lbs lbs (with optional 3rd spring) (3rd spring only required for extreme conditions) Cat. II, Cat.III Narrow, or Cat. III Wide Hitch Pins (Please specify when ordering) Main Frame 8 x 8 Tubular Steel Draw Frame 7 x 7 Tubular Steel Factory assembled with all cylinders & hoses installed In-Furrow Tail Wheel (15 x 19.5 Lug Tire) Gauge Wheel (11L x 15 Implement Tire) 22

23 6200 MOLDBOARD PLOW Semi Mounted, Hydraulic Variable Width, In-Furrow PLOW BOTTOM OPTION*: * Only one style of plow bottom included. (Please specify when ordering) Salford IH style bottom (comes with long-life Salford share) Choice* Salford European Style (S8) bottom.. Choice* Salford JD Style bottom.. Choice* OPTIONS: Cat. II, Cat.III Narrow, or Cat. III Wide Hitch Pins (Please specify when ordering) Choice * Lift Arm Pin sizes: Cat. II - 1 1/8", Cat. III - 1 7/16" Coverboards $159 each Increase reset pressure with 3rd spring to 4000 lbs $149/shank Coulters if not required Deduct -$439/each - One coulter on last furrow must be kept for proper operation 23

24 8200 MOLDBOARD PLOW Tandem Flex Trail Plow MODEL TOTAL # OF FURROWS DBL SPRING AUTO RESET FRONT HALF OF PLOW REAR HALF OF PLOW APPROX. WEIGHT (LBS) 8207* 7 Furrows $54,931 4 Furrows 3 Furrows* 10, Furrows $59,288 4 Furrows 4 Furrows 11, Furrows $64,504 4 Furrows 5 Furrows 13, Furrows $69,029 5 Furrows 5 Furrows 14, Furrows $74,233 5 Furrows 6 Furrows 15, Furrows $80,095 6 Furrows 6 Furrows 17, Furrows $85,407 6 Furrows 7 Furrows 18, Furrows $90,299 6 Furrows 8 Furrows 20, HP per bottom (approx.) * Gauge wheel not included on 4203 STANDARD FEATURES: Four-way Flex Hydraulic Steering Manual Adjustable Plowing widths (Please specify factory cut setting at time of order) Rear 2 point hitch with Detachable semi-mounted rear plow (4200 series) Heavy Duty 8"x8" tubular frame construction On Land / In furrow plowing Under-Frame Clearance over 35 Fore-aft Clearance - 40 Spring Loaded 20 Rippled Coulters Auto Reset Shanks / Adjustable trip pressure lbs lbs (with optional 3rd spring) (3rd spring only required for extreme conditions) Lead Furrow and Tandem wheels on front half (special low tread recap truck) Safety chain, reflectors and light kit 24

25 8200 MOLDBOARD PLOW Tandem Flex Trail Plow PLOW BOTTOM OPTION*: * Only one style of plow bottom included. (Please specify when ordering) Salford IH style bottom (comes with long-life Salford share) Choice* Salford European Style (S8) bottom.. Choice* Salford JD Style bottom.. Choice* OPTIONS: Cat. IV Hitch. Standard * Pin sizes: Cat. III - 1 7/16", Cat. IV - 2", Cat. V - 2 3/4" Upgrade to Cat 5 hitch (Recommended for 8214) $245 Coverboards $159 each Increase reset pressure with 3rd spring to 4000 lbs $149/shank Coulters if not required..deduct -$439 each - One coulter on last furrow must be kept for proper operation 25

26 8300 MOLDBOARD PLOW Tandem Flex Trail, Hydrualic Variable Width Plow MODEL TOTAL # OF FURROWS DBL SPRING AUTO RESET FRONT HALF OF PLOW REAR HALF OF PLOW APPROX. WEIGHT (LBS) Furrows $100,495 6 Furrows 6 Furrows 23, Furrows $110,699 6 Furrows 8 Furrows 26, Furrows $120,973 8 Furrows 8 Furrows 27, HP per bottom (approx.) STANDARD FEATURES: Four-way Flex Hydraulic Steering Hydraulically adjustable furrow width, 12" - 22" Rear 2 point hitch with Detachable semi-mounted rear plow (6200 series) Heavy Duty 8"x8" tubular truss frame construction On Land plowing Under-Frame Clearance over 35 Fore-aft Clearance - 40 Spring Loaded 20 Rippled Coulters Auto Reset Shanks / Adjustable trip pressure - 2,500lbs to 3,500lbs Lead Furrow and Tandem wheels on front half (special low tread recap truck) Safety chain, reflectors and light kit Factory assembled with all cylinders & hoses installed 26

27 8300 MOLDBOARD PLOW Tandem Flex Trail, Hydrualic Variable Width Plow PLOW BOTTOM OPTION*: * Only one style of plow bottom included. (Please specify when ordering) Salford IH style bottom (comes with long-life Salford share) Choice* Salford European Style (S8) bottom.. Choice* Salford JD Style bottom.. Choice* OPTIONS: Cat. IV Hitch. Standard * Pin sizes: Cat. IV - 2", Cat. V - 2 3/4" Upgrade to Cat 5 hitch (Recommended for 8314 and 8316) $245 Coverboards $159 each Coulters if not required deduct-$439 each - One coulter on last furrow must be kept for proper operation 27

28 Intentionally Blank 28

29 INDEPENDENT SERIES I-1100 Coil-Tech Coulter I, 1 1/4" Blade Mounts - 20" Wavy Coulters on 7.5" Spacing I-1100 Coil-Tech Coulter I, 1 1/4" Blade Mounts - 20" Wavy Coulters on 7.5" Spacing I-1100 SWITCHBLADE SHANK KITS Tillage and Fertilizer Application - 1,300LB Hydraulic reset shanks Select category to match draw pin diameter and tractor horse power. Hitch Pin Chart Draft Load Category 3 1 1/4-1 1/2" dia. Up to 250 hp Category 4 1 5/8-2 dia. Up to 400 hp Category /4" dia. Up to 670 hp NOTE: Hitch wear caused by smaller pin size or larger hp than recommended voids hitch warranty. 29

30 I-1100 Coil-Tech Coulter I, 1 1/4" Blade Mounts - 20" Wavy Coulters on 7.5" Spacing Coil-tech I coulter mounts 20", four bolt wavy coulters Example Layout: All wavy coulters on 7.5" spacing CONFIGURATION HARROW ATTACHMENTS SPECIFICATIONS Model Size Base Price # of coulters PLEASE SEE NEXT PAGE FOR HARROW ATTACHMENTS Transport Height with Harrows Transport Width Approx. weight with Standard Harrows (lbs) (***) 12' $26, No wings 13'3" 16' 3-pc Flat Fold $35, ' 10' 20' $44, '2" 13'3" 24' $51, '8" 13'3" 28' $56, ' 15'8 31' $61, '6 15'8 36' $73, '2 21' 41'** $87, '6 19' 41' $80, '6 21' 50'** $111, '3 19' 60'** $131, '8" 21'10" 12 HP per foot (approx.) ** Bi - Fold Wing ****See page 70 for harrow weights (approx. lbs/ft) *** Additional Frame Weights are no longer compatible with the I-1100 due to the frame weight increase STANDARD FEATURES: 2 Choices of Blades: Tires Mainframe Tires Wings -20 x 5mm - 8 or 13 wave 12' - 16': 6 Bolt 11L x 15 F 20'-41': 11 L x 15 6 Bolt load range "D" Cat. 3 or 4 hitch (please specify) 20' - 31': 8 Bolt 12.5L x 15 "F" 50', 60': 8 bolt 12.5 L x 15 "F" Hydraulic self-leveling frame (4 x 6 ) 36'-41': 8 Bolt 305/70 x R22.5* Hydraulic single point depth control 50': 8 Bolt R x 22.5* Walking tandem on main frame and wings 60': 10 Bolt R x 22.5* Exception: single wheels on 20' wings * Recapped Truck Tire 7,100 9,500 12,200 14,400 17,400 18,100 21,900 28,700 23,300 33,600 39,200 30

31 I-1100 Coil-Tech Coulter I, 1 1/4" Blade Mounts - 20" Wavy Coulters on 7.5" Spacing OPTIONS: FRAME OPTIONS: Axle pivot grease bank (3 section frame only uo to 31') $313 Weight kit built into frame N/A Cat. 4 Articulating Implement Hitch Upgrade $180 Cat. 5 Solid Hitch Upgrade (PP53XL) $65 12' $33,260 $34,976 $36,176 $37,892 Cat. 5 Articulating Implement Hitch Upgrade $300 16' $43,899 $46,187 $47,787 $50,075 20' $55,637 $58,497 $60,497 $63,357 TIRE OPTIONS: 24' $64,047 $67,479 $69,879 $73,311 Upgrade 11L D Tire to Recap 245/70 x $212/Tire 28' $71,581 $75,585 $78,385 $82,389 Upgrade 12.5 to 8 Bolt 305/70 x R22.5 $226/Tire 31' $78,034 $82,467 $85,567 $90,000 Upgrade 305/70-8 Bolt to R, Recap truck tire 36' $92,367 $97,515 $101,115 $106,263 (36' and 41' models only)... $275/Tire 41'** $109,412 $115,275 $119,375 $125,238 41' $102,439 $108,302 $112,402 $118,265 TOW HITCH OPTIONS: 50'** $138,344 $145,494 $150,494 $157,644 Adjustable tow hitch (One man hook-up) $3,109 60'** $163,563 $172,143 $178,143 $186,723 - Choose hitch - Single OR Double clevis Included - Includes lighting connection for trailing implement NOTE: Base machine requires 2 hydraulic circuits. Each additional hydraulic - Choice of drop down or tow hitch insert. option will require an additional hydraulic circuit. Hydraulic lines and quick coupler to tow hitch -from tractor remotes $440 NEW FEATURE!! Rubber Mounted rolling harrow baskets are now standard on manual adjust and hydraulic rolling harrow packages. Tow Hitch upgrade (36' and up) - required to tow carts with capacities over 700 bushel. NOTE: Special hydraulic/electrical kit required to tow air carts behind I-Series machines - Call for pricing Harrow Attachments (Including Base Price) Model Size Coil Tine & Single 14 Roller (no hydraulics) Hydraulic Adjust Coil Tine & Manual 14" Roller $1,576 HARROW OPTIONS: Harrow Dirt Shield Hardened Tines NOTE: See attachments section for more options Manual Coil Tine & Hydraulic Lift Single 14 Roller $42/ft $40/ft Hydraulic Adjust Coil Tine & Hydraulic Lift Single 14" Roller 31

32 SWITCHBLADE TILLAGE OR FERTILIZER APPLICATION SHANKS Hydraulic Reset (300-1,300 lbs range) w/flip-up storage setting Hydraulic and Shear Bolt protected (trip height 10 varies with shank depth setting) Kit includes mounting extensions, hardware, additional coulters if required and layout pattern Step 1 - Choose Shank Spacing 30" Spacing Shank Kits 20" Spacing Shank Kits* 15" Spacing Shank Kits Machine Model Size Fertilizer Coverage Number of Coulters Number of Shanks Shank Kit Pricing Fertilizer Coverage Number of Coulters Number of Shanks Shank Kit Pricing Fertilizer Coverage Number of Coulters Number of Shanks Shank Kit Pricing 12' 12' 19 5 $6,000 11'3" 19 9 $8,865 16' 15' 25 6 $7,200 13'9" $10,835 20' 17'6" 33 8 $9,600 16'3" $14,775 24' 22'6" 37 9 $10,800 21'3" $16,745 28' 27'6" $13,200 26'3" $20,685 31' 30' $14,400 30' $22,655 28'9" $22,655 36' 35' $16,800 33'9" $26,595 41'** 40' $19,200 41'7" $30,535 38'9" $30,535 41' 40' $19,200 41'7" $30,535 38'9" $30,535 50'** 47'6" $22,800 50' $38,415 48'9" $38,415 60'** 57'6" $27,600 58'9" $46,295 **Bi-Fold Wing * 20" shank spacing is only available on new machine orders. *20" shank spacing converts machine to 6.7" spacing and, therefore, it uses more coulters than 15" or 30" shank spacing. Notes: Shanks & standard weight Kits are NOT to be installed on the same machine. Negative front hitch weight may occur with 15" spacing when hydraulic rollers have been added. For safe road transport, additional hitch weights may need to be added ($198 per extra weight needed). Some re-spacing of the coulters may be required. OPTION: Extended rear parking stand for machines with shanks and rollers $525 32

33 SWITCHBLADE TILLAGE OR FERTILIZER APPLICATION SHANKS Note: Price includes choice of one shank type - Chisel or fertilizer Step 2 - Choose ONE Option (NH 3 or Chisel) NH3 Shank Hardware 1 1/4 wide x 2 high spring leaf shank KNIFE NOT INCLUDED Shank/Wear part side mount bolt pattern: 2 x 1/2" bolts on 2 3/4" centers Chisel Shank Hardware 1 1/4 wide x 2 1/2 high spring leaf shank (front mounting) POINT NOT INCLUDED Point available at additional cost: CT8235CHYD - Cast Chrome Point 2-1/2.. $71.00 each Options: Fertilizer shank leaf part no. C90174 (Wear parts not included). $ each Tillage shank leaf part no. C90360 (Wear parts not included) $ each Requires closed center hydraulics Negative front hitch weight may occur with 15" spacing when hydraulic rollers have been added. For safe road transport, additional weights may need to be added ($198 per extra weight needed). 33

34 Intentionally Blank 34

35 INDEPENDENT SERIES I-1200 Coil-Tech Coulter I, 1 1/4" Blade Mounts - 20" Wavy Coulters on 5" Spacing I-1200 Coil-Tech Coulter I, 1 1/4" Blade Mounts - 20" Wavy Coulters on 5" Spacing I-1200 SWITCHBLADE SHANK KITS Tillage and Fertilizer Application - 1,300LB Hydraulic reset shanks Select category to match draw pin diameter and tractor horse power. Hitch Pin Chart Draft Load Category 3 Category 4 1 1/4-1 1/2" dia. 1 5/8-2 dia. Up to 250 hp Up to 400 hp Category /4" dia. Up to 670 hp NOTE: Hitch wear caused by smaller pin size or larger hp than recommended voids hitch warranty. 35

36 I " Blades on 5" spacing Coil-Tech Coulter I, 1 1/4" Blade Mounts - 20" Wavy Coulters on 5" Spacing Coil-tech I 1 1/4" spring coulter mounts 20", four bolt wavy coulters Example Layout: All wavy coulters on 5" spacing CONFIGURATION Model Size Base Price # of coulters Transport Height Transport Width Approx. weight with Standard Harrows (lbs) Maximum Weight kits allowed ($198 ea) 12' $30, No Wings 13'3" 7, ' 3-pc Flat Fold $38, ' 10' 11, ' $48, '2" 13'3" 13, ' $55, '8" 13'3" 16, ' $62, ' 15'8 19, ' $67, '6 15'8 19, ' $80, '2 21' 24, '** $99, '6 19' 31, ' $87, '6 21' 26, '** $131, '3 19' 36, '** $151, '8" 21'10" 43, HP per foot (approx.) ** Bi - Fold Wing ****See page 70 for harrow weights (approx. lbs/ft) Minimum 50lbs per ft recommended in many soil types (do not exceed 100 lb/ft) STANDARD FEATURES: Tires Mainframe Tires Wings 2 Choices of Blades: 12' 6 Bolt 11L x 15 F 20' - 41': 11L x 15 6 Bolt load range D -20 x 4.5mm - 8 or 13 wave 16' Dual 6 Bolt 11L x 15 F 50', 60': 8 Bolt 12.5L x 15 "F" Cat. 3 or 4 hitch (please specify) Hydraulic self-leveling frame (4 x 6 ) 20' & 24' 8 Bolt 12.5L x 15 F 28-36' 8 Bolt 305/70 x R22.5* Hydraulic single point depth control 41' (3 section) 8 Bolt 305/70 x R22.5* Walking tandems on Main Frame and wings 18' - 60' 41' (5 section) - 8 Bolt 425/65 x R22.5* (Exception: Single wheels on 20' wings) 50' - 10 Bolt 425/65 x R22.5* Hydraulic telescope w/cushion hitch (50' and 60' models only) 60' - 10 Bolt 445/65 x R22.5 standard on 50' and 60' models HARROW ATTACHMENTS PLEASE SEE NEXT PAGE FOR HARROW ATTACHMENTS *Recapped Truck Tires SPECIFICATIONS 36

37 I " Blades on 5" spacing Coil-Tech Coulter I, 1 1/4" Blade Mounts - 20" Wavy Coulters on 5" Spacing OPTIONS: FRAME OPTIONS: Axle pivot grease bank (3 section frame only up to 31') $313 Weight kit 100 lb $198/Each Minimum 50lbs per ft recommended in many soil types 12' $36,965 $38,681 $39,881 $41,597 Cat. 4 Articulating Implement Hitch Upgrade $180 16' $46,959 $49,247 $50,847 $53,135 Cat. 5 Solid Hitch Upgrade (PP53XL)... $65 20' $59,667 $62,527 $64,527 $67,387 Cat. 5 Articulating Implement Hitch Upgrade $300 24' $68,448 $71,880 $74,280 $77,712 28' $77,522 $81,526 $84,326 $88,330 TIRE OPTIONS: 31' $84,435 $88,868 $91,968 $96,401 Upgrade 11L D Tire to Recap 245/70 x 19.5 $212/Tire 36' $99,473 $104,621 $108,221 $113,369 Upgrade 11L F Tire to Recap 245/70 x $162/Tire 41'** $121,288 $127,151 $131,251 $137,114 Upgrade 12.5 to 8 Bolt 305/70 x R22.5 $226/Tire 41' $109,786 $115,649 $119,749 $125,612 Upgrade 305/70-8 Bolt to R, Recap truck tire 50'** $158,692 $165,842 $170,842 $177,992 (36' and 41' models only)... $275/Tire 60'** $184,171 $192,751 $198,751 $207,331 Upgrade 10 bolt 425 to 10 bolt new R22.5 on mainframe (50' models only)... $345/Tire NOTE: Base machine requires 2 hydraulic circuits. Each additional hydraulic option will require an additional hydraulic circuit. TOW HITCH OPTIONS: Adjustable tow hitch (One man hook-up). $3,109 NEW FEATURE!! Rubber Mounted rolling harrow baskets are now standard - Choose hitch - Single OR Double clevis Included on manual adjust and hydraulic rolling harrow packages. - Includes lighting connection for trailing implement - Choice of drop down or tow hitch insert. HARROW OPTIONS: Hydraulic lines and quick coupler to tow hitch Harrow Dirt Shield $42/ft -from tractor remotes. $440 Hardened Tines $40/ft Tow Hitch upgrade (36' and up) - required to tow carts with capacities over 700 bushel. NOTE: Special hydraulic/electrical kit required to tow air carts behind I-Series machines - Call for pricing Harrow Attachments (Including Base Price) Model Size Coil Tine & Single 14 Roller (no hydraulics) Hydraulic Adjust Coil Tine & Manual 14" Roller $1,576 NOTE: See attachments section for more options Manual Coil Tine & Hydraulic Lift Roller Hyd. Adjust Coil Tine & Hydraulic Lift Roller 37

38 SWITCHBLADE TILLAGE OR FERTILIZER APPLICATION SHANKS Hydraulic Reset (300-1,300 lbs range) w/flip-up storage setting Hydraulic and Shear Bolt protected (trip height 10 varies with shank depth setting) Kit includes mounting extensions, hardware, additional coulters if required and layout pattern Step 1 - Choose Shank Spacing 30" Spacing Shank Kits 20" Spacing Shank Kits* 15" Spacing Shank Kits Machine Model Size Fertilizer Coverage Number of Coulters Number of Shanks Shank Kit Pricing Fertilizer Coverage Number of Coulters Number of Shanks Shank Kit Pricing Fertilizer Coverage Number of Coulters Number of Shanks Shank Kit Pricing 12' 12' 29 5 $6,000 11'3" 29 9 $8,865 16' 15' 37 6 $7,200 13'9" $10,835 20' 17'6" 49 8 $9,600 16'3" $14,775 24' 22'6" 57 9 $10,800 21'3" $16,745 28' 27'6" $13,200 26'3" $20,685 31' 30' $14,400 30' $20,383 28'9" $22,655 36' 35' $16,800 33'9" $26,595 41'** 40' $19,200 41'7" $27,885 38'9" $30,535 41' 40' $19,200 41'7" $27,885 38'9" $30,535 50'** 47'6" $22,800 50' $34,629 48'9" $38,415 60'** 57'6" $27,600 58'9" $46,295 **Bi-Fold Wing * 20" shank spacing is only available on new machine orders. Notes: Shanks & standard weight Kits are NOT to be installed on the same machine. Negative front hitch weight may occur with 15" spacing when hydraulic rollers have been added. For safe road transport, additional hitch weights may need to be added ($198 per extra weight needed). Some re-spacing of the coulters may be required. OPTION: Extended rear parking stand for machines with shanks and rollers $525 38

39 SWITCHBLADE TILLAGE OR FERTILIZER APPLICATION SHANKS Note: Price includes choice of one shank type - Chisel or fertilizer Step 2 - Choose ONE Option (NH 3 or Chisel) NH3 Shank Hardware 1 1/4 wide x 2 high spring leaf shank KNIFE NOT INCLUDED Shank/Wear part side mount bolt pattern: 2 x 1/2" bolts on 2 3/4" centers Chisel Shank Hardware 1 1/4 wide x 2 1/2 high spring leaf shank (front mounting) POINT NOT INCLUDED Point available at additional cost: CT8235CHYD - Cast Chrome Point 2-1/2.. $71.00 each Options: Fertilizer shank leaf part no. C90174 (Wear parts not included). $ each Tillage shank leaf part no. C90360 (Wear parts not included) $ each Requires closed center hydraulics Negative front hitch weight may occur with 15" spacing when hydraulic rollers have been added. For safe road transport, additional weights may need to be added ($198 per extra weight needed). 39

40 Intentionally Blank 40

41 INDEPENDENT SERIES I-2100 Coil-Tech Coulter II, 1 5/8" Blade Mounts - 22" Wavy Coulters on 7.5" Spacing I-2100 Coil-Tech Coulter II, 1 5/8" Blade Mounts - 22" Wavy Coulters on 7.5" Spacing I-2100 SWITCHBLADE SHANK KITS Tillage and Fertilizer Application - 1,300LB Hydraulic reset shanks Select category to match draw pin diameter and tractor horse power. Hitch Pin Chart Draft Load Category 3 Category 4 Category 5 1 1/4-1 1/2" dia. 1 5/8-2 dia /4" dia. Up to 250 hp Up to 400 hp Up to 670 hp NOTE: Hitch wear caused by smaller pin size or larger hp than recommended voids hitch warranty. 41

42 I-2100 Coil-Tech Coulter II, 1 5/8" Blade Mounts - 22" Wavy Coulters on 7.5" Spacing Coil-tech II coulter mounts 22", five bolt wavy coulters Example Layout: All wavy coulters on 7.5" spacing CONFIGURATION HARROW ATTACHMENTS PLEASE SEE NEXT PAGE FOR Model Size Base Price # of coulters Transport Height Transport Width HARROW ATTACHMENTS Approx. weight with Standard Harrows (lbs) Maximum Weight kits allowed ($198 ea) 12' $30, No wings 13'3" 8, ' 3-pc Flat Fold $40, ' 10' 11, ' $50, '2" 13'3" 15, ' $57, '8" 13'3" 16, ' $65, ' 15'8 19, ' $71, '6 15'8 20, ' $83, '2 21' 24, '** $104, '6 19' 31, ' $92, '6 21' 26, '** $134, '3 19' 37, '** $153, '8" 21'10" 44, HP per foot (approx.) ** Bi - Fold Wing ****See page 70 for harrow weights (approx. lbs/ft) STANDARD FEATURES: Tires Mainframe Tires Wings 2 Choices of Blades: 12' 6 Bolt 11L x 15 F 20' - 41': 11L x 15 6 Bolt load range D 22 x 5mm - 8 or 13 wave 16' 6 Bolt 11L x 15 F 50', 60': 8 Bolt 12.5L x 15 "F" Cat. 3 or 4 hitch (please specify) 20' & 24' 8 Bolt 12.5L x 15 F Hydraulic self-leveling frame (4 x 6 ) 28' - 36' 8 Bolt 305/70 x R22.5* Hydraulic single point depth control 41' (3 section) 8 Bolt 305/70 x R22.5* Walking tandems on Main Frame and wings 20' - 60' 41' (5 section) - 8 Bolt R x 22.5* (Exception: Single wheels on 20' wings) 50' - 10 Bolt R x 22.5* 60' - 10 Bolt R x 22.5 * Recapped Truck Tire SPECIFICATIONS 42

43 I-2100 Coil-Tech Coulter II, 1 5/8" Blade Mounts - 22" Wavy Coulters on 7.5" Spacing OPTIONS: FRAME OPTIONS: Axle pivot grease bank (3 section frame only up to 31') $313 Weight kit 100 lb $198/Each Cat. 4 Articulating Implement Hitch Upgrade $180 Harrow Attachments (Including Base Price) Coil Tine & Single 14 Roller Model Size (no hydraulics) Hydraulic Adjust Coil Tine & Manual 14" Roller Manual Coil Tine & Hydraulic Lift Roller Hyd. Adjust Coil Tine & Hydraulic Lift Roller Cat. 5 Solid Hitch Upgrade (PP53XL) $65 Cat. 5 Articulating Implement Hitch Upgrade $300 12' $37,048 $38,490 $39,690 $41,406 16' $49,353 $51,277 $52,877 $55,165 TIRE OPTIONS: 20' $61,825 $64,229 $66,229 $69,089 Upgrade 11L D Tire to Recap 245/70 x 19.5 $212/Tire 24' $71,016 $73,901 $76,301 $79,733 Upgrade 11L F Tire to Recap 245/70 x $162/Tire 28' $81,336 $84,702 $87,502 $91,506 Upgrade 12.5 to 8 Bolt 305/70 x R22.5 $226/Tire 31' $88,582 $92,309 $95,409 $99,842 Upgrade 305/70-8 Bolt to R, Recap truck tire 36' $103,571 $107,899 $111,499 $116,647 (36' and 41' models only)... $275/Tire 41'** $127,931 $132,860 $136,960 $142,823 Upgrade 10 bolt 425 to 10 bolt new R22.5 on mainframe 41' $115,161 $120,090 $124,190 $130,053 (50' models only)... $345/Tire 50'** $162,964 $168,975 $173,975 $181,125 60'** $186,841 $194,055 $200,055 $208,635 TOW HITCH OPTIONS: Adjustable tow hitch (One man hook-up) $3,109 NOTE: Base machine requires 2 hydraulic circuits. Each additional hydraulic - Choose hitch - Single OR Double clevis Included option will require an additional hydraulic circuit. - Includes lighting connection for trailing implement - Choice of drop down or tow hitch insert. NEW FEATURE!! Rubber Mounted rolling harrow baskets are now Hydraulic lines and quick coupler to tow hitch standard on manual adjust and hydraulic rolling harrow packages. -from tractor remotes $440 HARROW OPTIONS: Tow Hitch upgrade (36' and up) - required to tow carts with Harrow Dirt Shield $42/ft capacities over 700 bushel. $1,576 Hardened Tines $40/ft NOTE: Special hydraulic/electrical kit required to tow air carts behind I-Series machines - Call for pricing NOTE: See attachments section for more options 43

44 SWITCHBLADE TILLAGE OR FERTILIZER APPLICATION SHANKS Hydraulic Reset (300-1,300 lbs range) w/flip-up storage setting Hydraulic and Shear Bolt protected (trip height 10 varies with shank depth setting) Kit includes mounting extensions, hardware, additional coulters if required and layout pattern Step 1 - Choose Shank Spacing 30" Spacing Shank Kits 20" Spacing Shank Kits* 15" Spacing Shank Kits Machine Model Size Fertilizer Coverage Number of Coulters Number of Shanks Shank Kit Pricing Fertilizer Coverage Number of Coulters Number of Shanks Shank Kit Pricing Fertilizer Coverage Number of Coulters Number of Shanks Shank Kit Pricing 12' 12' 19 5 $6,000 11'3" 19 9 $8,865 16' 15' 25 6 $7,200 13'9" $10,835 20' 17'6" 33 8 $9,600 16'3" $14,775 24' 22'6" 37 9 $10,800 21'3" $16,745 28' 27'6" $13,200 26'3" $20,685 31' 30' $14,400 30' $22,655 28'9" $22,655 36' 35' $16,800 33'9" $26,595 41'** 40' $19,200 41'7" $30,535 38'9" $30,535 41' 40' $19,200 41'7" $30,535 38'9" $30,535 50'** 47'6" $22,800 50' $38,415 48'9" $38,415 60'** 57'6" $27,600 58'9" $46,295 **Bi-Fold Wing * 20" shank spacing is only available on new machine orders. *20" shank spacing converts machine to 6.7" spacing and, therefore, it uses more coulters than 15" or 30" shank spacing. Notes: Shanks & standard weight Kits are NOT to be installed on the same machine. Negative front hitch weight may occur with 15" spacing when hydraulic rollers have been added. For safe road transport, additional hitch weights may need to be added ($198 per extra weight needed). Some re-spacing of the coulters may be required. OPTION: Extended rear parking stand for machines with shanks and rollers $525 44

45 SWITCHBLADE TILLAGE OR FERTILIZER APPLICATION SHANKS Note: Price includes choice of one shank type - Chisel or fertilizer Step 2 - Choose ONE Option (NH 3 or Chisel) NH3 Shank Hardware 1 1/4 wide x 2 high spring leaf shank KNIFE NOT INCLUDED Shank/Wear part side mount bolt pattern: 2 x 1/2" bolts on 2 3/4" centers Chisel Shank Hardware 1 1/4 wide x 2 1/2 high spring leaf shank (front mounting) POINT NOT INCLUDED Point available at additional cost: CT8235CHYD - Cast Chrome Point 2-1/2 $71.00 each Options: Fertilizer shank leaf part no. C90174 (Wear parts not included) $ each Tillage shank leaf part no. C90360 (Wear parts not included) $ each Requires closed center hydraulics Negative front hitch weight may occur with 15" spacing when hydraulic rollers have been added. For safe road transport, additional weights may need to be added ($198 per extra weight needed). 45

46 Intentionally Blank 46

47 INDEPENDENT SERIES I-2200 Coil-Tech Coulter II, 1 5/8" Blade Mounts - 22" Wavy Coulters on 5" Spacing I-2200 Coil-Tech Coulter II, 1 5/8" Blade Mounts - 22" Wavy Coulters on 5" Spacing I-2200 SWITCHBLADE SHANK KITS Tillage and Fertilizer Application - 1,300LB Hydraulic reset shanks Select category to match draw pin diameter and tractor horse power. Hitch Pin Chart Draft Load Category 3 Category 4 1 1/4-1 1/2" dia. 1 5/8-2 dia. Up to 250 hp Up to 400 hp Category /4" dia. Up to 670 hp NOTE: Hitch wear caused by smaller pin size or larger hp than recommended voids hitch warranty. 47

48 I-2200 Coil-Tech Coulter II, 1 5/8" Blade Mounts - 22" Wavy Coulters on 5" Spacing Coil-tech II coulter mounts 22", five bolt wavy coulters Example Layout: All wavy coulters on 5" spacing CONFIGURATION HARROW ATTACHMENTS SPECIFICATIONS Model Size Base Price # of coulters PLEASE SEE NEXT PAGE FOR HARROW ATTACHMENTS Transport Height Transport Width Approx. weight with Standard Harrows (lbs) Maximum Weight kits allowed ($198 ea) 12' $39, No Wings 13'3" 10, ' 3-pc Flat Fold $55, ' 10' 14, ' $66, '2" 13'3" 17, ' $71, '8" 13'3" 19, ' $80, ' 15'8 23, ' $87, '6 15'8 24, ' $111, '2 21' 30, '** $138, '6 18'9 36, ' $125, '6 21' 32, '** $167, '3 19' 47, HP per foot (approx.) ** Bi - Fold Wing ****See page 70 for harrow weights (approx. lbs/ft) Minimum 50lbs per ft recommended in many soil types (do not exceed 100 lb/ft) STANDARD FEATURES: 2 Choices of Blades: Tires Mainframe Recap Truck tire Tires Wings -22 x 5mm - 8 or 13 wave 12' 6 Bolt 11L x 15 F 20' - 41' All wings Cat. 3 or 4 hitch (please specify) 16' - 24' 8 bolt 305/70x R L x 15 6 bolt load range D Hydraulic self-leveling frame (4 x 6 ) 28 & 31' 8 bolt 305/70 x R ' - All Wings Hydraulic single point depth control 41 & 36 (3 section) 8 bolt 425/70 x R /70R bolt tires Walking tandems on Main Frame and wings 41' (5 section) - 10 bolt R x 22.5 (Exception: Single wheels on 20' wings) 50' (5 section) - 10 bolt R x 22.5 Hydraulic telescope w/cushion hitch standard on 36', 41', 41' BiFold and 50' models 48

49 I-2200 Coil-Tech Coulter II, 1 5/8" Blade Mounts - 22" Wavy Coulters on 5" Spacing OPTIONS: FRAME OPTIONS: Axle pivot grease bank (3 section frame only up to 31') $313 Weight kit 100 lb $198/Each Harrow Attachments (Including Base Price) Coil Tine & Single 14 Roller Model Size (no hydraulics) Hydraulic Adjust Coil Tine & Manual 14" Roller Manual Coil Tine & Hydraulic Lift Roller Hyd. Adjust Coil Tine & Hydraulic Lift Roller Do not exceed 100 lb./ft 12' $46,601 $48,044 $49,244 $50,960 Cat. 4 Articulating Implement Hitch Upgrade $180 16' $64,424 $66,348 $67,948 $70,236 Cat. 5 Solid Hitch Upgrade (PP53XL) $65 20' $77,746 $80,150 $82,150 $85,010 Cat. 5 Articulating Implement Hitch Upgrade $300 24' $85,043 $87,929 $90,329 $93,761 28' $96,149 $99,515 $102,315 $106,319 31' $104,728 $108,455 $111,555 $115,988 TIRE OPTIONS: 36' $131,981 $136,309 $139,909 $145,057 Upgrade 11L D Tire to Recap 245/70 x 19.5 $212/Tire 41'** $161,488 $166,417 $170,517 $176,380 41' $148,974 $153,903 $158,003 $163,866 TOW HITCH OPTIONS: 50'** $195,953 $201,964 $206,964 $214,114 Adjustable tow hitch (One man hook-up) $3,109 - Choose hitch - Single OR Double clevis Included NOTE: Base machine requires 2 hydraulic circuits. Each additional hydraulic - Includes lighting connection for trailing implement option will require an additional hydraulic circuit. - Choice of drop down or tow hitch insert. Hydraulic lines and quick coupler to tow hitch NEW FEATURE!! Rubber Mounted rolling harrow baskets are now -from tractor remotes $440 standard on manual adjust and hydraulic rolling harrow packages. Tow Hitch upgrade (36' and up) - required to tow carts with capacities over 700 bushel. HARROW OPTIONS: $1,576 Harrow Dirt Shield $42/ft Hardened Tines $40/ft NOTE: Special hydraulic/electrical kit required to tow air carts behind I-Series machines - Call for pricing NOTE: See attachments section for more options 49

50 SWITCHBLADE TILLAGE OR FERTILIZER APPLICATION SHANKS Hydraulic Reset (300-1,300 lbs range) w/flip-up storage setting Hydraulic and Shear Bolt protected (trip height 10 varies with shank depth setting) Kit includes mounting extensions, hardware, additional coulters if required and layout pattern Step 1 - Choose Shank Spacing 30" Spacing Shank Kits 15" Spacing Shank Kits Machine Model Size Fertilizer Coverage Number of Shanks Shank Kit Pricing Fertilizer Coverage Number of Shanks Shank Kit Pricing 20' 17'6" 8 $9,600 16'3" 15 $14,775 24' 22'6" 9 $10,800 21'3" 17 $16,745 28' 27'6" 11 $13,200 26'3" 21 $20,685 31' 30' 12 $14,400 28'9" 23 $22,655 36' 35' 14 $16,800 33'9" 27 $26,595 41'** 40' 16 $19,200 38'9" 31 $30,535 41' 40' 16 $19,200 38'9" 31 $30,535 50'** 47'6" 19 $22,800 48'9" 39 $38,415 **Bi-Fold Wing Notes: Shanks & standard weight Kits are NOT to be installed on the same machine. Negative front hitch weight may occur with 15" spacing when hydraulic rollers have been added. For safe road transport, additional hitch weights may need to be added ($198 per extra weight needed). Some re-spacing of the coulters may be required. OPTION: Extended rear parking stand for machines with shanks and rollers $525 50

51 SWITCHBLADE TILLAGE OR FERTILIZER APPLICATION SHANKS Note: Price includes choice of one shank type - Chisel or fertilizer Step 2 - Choose ONE Option (NH 3 or Chisel) NH3 Shank Hardware 1 1/4 wide x 2 high spring leaf shank KNIFE NOT INCLUDED Shank/Wear part side mount bolt pattern: 2 x 1/2" bolts on 2 3/4" centers Chisel Shank Hardware 1 1/4 wide x 2 1/2 high spring leaf shank (front mounting) POINT NOT INCLUDED Point available at additional cost: CT8235CHYD - Cast Chrome Point 2-1/2. $71.00 each Options: Fertilizer shank leaf part no. C90174 (Wear parts not included) $ each Tillage shank leaf part no. C90360 (Wear parts not included) $ each closed center hydraulics Negative front hitch weight may occur with 15" spacing when hydraulic rollers have been added. For safe road transport, additional weights may need to be added ($198 per extra weight needed). 51

52 Intentionally Blank 52

53 INDEPENDENT SERIES I-4100 I-4100 Heavy Duty Rubber Suspension Disc Mounts (Front) and Coil Mounts (Rear) 22" Shallow Concave Blades ahead of Wavy Coulters on 7.5" Spacing Heavy Duty Rubber Suspension Disc Mounts (Front) and Coil Mounts (Rear) - 22" Shallow Concave Blades ahead of Wavy Coulters on 7.5" Spacing and 22" 5 Bolt 8 Wave Coulters Select category to match draw pin diameter and tractor horse power. Hitch Pin Chart Draft Load Category 3 Category 4 Category 5 1 1/4-1 1/2" dia. 1 5/8-2 dia /4" dia. Up to 250 hp Up to 400 hp Up to 670 hp NOTE: Hitch wear caused by smaller pin size or larger hp than recommended voids hitch warranty. 53

54 I Heavy Duty Rubber Suspension & Coil-Tech II Coulter Mounts 22" Shallow Concave Blades ahead of Wavy Coulters on 7.5" Spacing Rubber suspension mounts on front discs 22", Five bolt shallow concave blades Coil suspension mounts on rear coulters 22", Five bolt 8 wave coulters Example Layout: 2 rows of shallow concave blades ahead of wavy coulters on 7.5" spacing Model Size CONFIGURATION Base Price # of Rubber Mount Concave Blades # of Coil Tech II Wavy Coulters HARROW ATTACHMENTS PLEASE SEE NEXT PAGE FOR HARROW ATTACHMENTS Transport Height SPECIFICATIONS Transport Width Approx. weight with Standard Harrows (lbs) Maximum Weight kits allowed ($198 ea) 12' $31, No wings 13'3" 8, ' 3-pc Flat Fold $41, ' 10' 12, ' $52, '2" 13'3" 14, ' $59, '8" 13'3" 16, ' $67, ' 15'8 19, ' $73, '6 15'8 20, ' $85, '2 21' 24, '** $108, '6 18'9 32, ' $94, '6 21' 27, '** $143, '3 19' 37, '** $162, '8" 21'10" 44, HP per foot (approx.) ** Bi - Fold Wing ****See page 70 for harrow weights (approx. lbs/ft) STANDARD: Tires Mainframe Tires Wings 2 Types of Blades: 12' 6 Bolt 11L x 15 F 20' - 41': 11L x 15 6 Bolt load range D -Front: 22 x 5mm -shallow concave discs (rubber) 16' 6 Bolt 11L x 15 F -Rear: 22 x 5mm - 8 wave coulters (coil) 20' & 24' 8 Bolt 12.5L x 15 F 50', 60': 8 Bolt 12.5L x 15 "F" Cat. 3 or 4 hitch (please specify) 28-36' 8 Bolt 305/70 x R22.5* Hydraulic self-leveling frame (4 x 6 ) 41' (3 section) 8 Bolt 305/70 x R22.5* Hydraulic single point depth control 41' (5 section) - 8 Bolt R x 22.5* Walking tandems on Main Frame and wings 20' - 60' 50' - 10 Bolt R x 22.5* (Exception: Single wheels on 20' wings) 60' - 10 Bolt R x 22.5 Hydraulic telescope w/cushion hitch * Recapped Truck Tire 50' & 60' models only 54

55 I Heavy Duty Rubber Suspension & Coil-Tech II Coulter Mounts 22" Shallow Concave Blades ahead of Wavy Coulters on 7.5" Spacing OPTIONS: FRAME OPTIONS: Axle pivot grease bank (3 section frame only up to 31') $313 Weight kit 100 lb $198/Each Do not exceed 75 lb./ft Hydraulic telescope (no cushion) (36' to 41'-3&5 pc models) $1,000 Cat. 4 Articulating Implement Hitch Upgrade $180 12' $37,948 $39,391 $40,591 $42,307 Cat. 5 Solid Hitch Upgrade (PP53XL) $65 16' $50,525 $52,449 $54,049 $56,337 Cat. 5 Articulating Implement Hitch Upgrade $300 20' $63,324 $65,728 $67,728 $70,588 24' $72,742 $75,628 $78,028 $81,460 28' $83,305 $86,671 $89,471 $93,475 TIRE OPTIONS: 31' $90,718 $94,445 $97,545 $101,978 Upgrade 11L D Tire to Recap 245/70 x 19.5 $212/Tire 36' $106,028 $110,356 $113,956 $119,104 Upgrade 11L F Tire to Recap 245/70 x 19.5 $162/Tire 41'** $131,036 $135,965 $140,065 $145,928 Upgrade 12.5 to 8 Bolt 305/70 x R22.5 $226/Tire 41' $117,881 $122,810 $126,910 $132,773 Upgrade 305/70-8 Bolt to R, Recap truck tire 50'** $171,666 $177,677 $182,677 $189,827 (36' and 41' models only) $275/Tire 60'** $196,091 $203,304 $209,304 $217,884 Upgrade 10 bolt 425 to 10 bolt new R22.5 on mainframe (50' models only)... $345/Tire NOTE: Base machine requires 2 hydraulic circuits. Each additional hydraulic option will require an additional hydraulic circuit. TOW HITCH OPTIONS: Adjustable tow hitch (One man hook-up) $3,109 NEW FEATURE!! Rubber Mounted rolling harrow baskets are now - Choose hitch - Single OR Double clevis Included standard on manual adjust and hydraulic rolling harrow packages. - Includes lighting connection for trailing implement - Choice of drop down or tow hitch insert. HARROW OPTIONS: Hydraulic lines and quick coupler to tow hitch Harrow Dirt Shield $42/ft -from tractor remotes $440 Hardened Tines $40/ft Tow Hitch upgrade (36' and up) - required to tow carts with capacities over 700 bushel. Harrow Attachments (Including Base Price) Model Size $1,576 NOTE: See attachments section for more options NOTE: Special hydraulic/electrical kit required to tow air carts behind I-Series machines - Call for pricing Coil Tine & Single 14 Roller (no hydraulics) Hydraulic Adjust Coil Tine & Manual 14" Roller Manual Coil Tine & Hydraulic Lift Roller Hyd. Adjust Coil Tine & Hydraulic Lift Roller 55

56 Intentionally Blank 56

57 INDEPENDENT SERIES I-4200 Heavy Duty Rubber Suspension Disc Mounts (Front) and Coil Mounts (Rear) 22" Shallow Concave Blades ahead of Wavy Coulters. Overall blade spacing net 5". Concave Blade Spacing 15" I-4200 Heavy Duty Rubber Suspension Disc Mounts (Front) and Coil Mounts (Rear) - 22" Shallow Concave Blades ahead of Wavy Coulters on 5" Spacing and 22" 5 Bolt 8 Wave Coulters Select category to match draw pin diameter and tractor horse power. Hitch Pin Chart Draft Load Category 3 Category 4 Category 5 1 1/4-1 1/2" dia. 1 5/8-2 dia /4" dia. Up to 250 hp Up to 400 hp Up to 670 hp NOTE: Hitch wear caused by smaller pin size or larger hp than recommended voids hitch warranty. 57

58 I " Shallow Concave Blades ahead of Wavy Coulters. Overall blade spacing net 5". Concave Blade Spacing 15" Model Size Rubber suspension mounts on front discs 22", Five bolt shallow concave blades Coil suspension mounts on rear coulters 22", Five bolt 8 wave coulters CONFIGURATION HARROW ATTACHMENTS SPECIFICATIONS Base Price # of Rubber Approx. # of Coil Tech Mount PLEASE SEE NEXT PAGE FOR Transport Transport weight with II Wavy Concave HARROW ATTACHMENTS Height Width Standard Coulters Blades Harrows (lbs) Maximum Weight kits allowed ($198 ea) 12' $41, No Wings 13'3" 10, ' 3-pc Flat Fold $62, ' 10' 14, ' $68, '2" 13'3" 17, ' $73, '8" 13'3" 19, ' $82, ' 15'8 24, ' $89, '6 15'8 24, ' $116, '2 21' 30, '** $141, '6 18'9 37, ' $128, '6 21' 32, '** $171, '3 19' 47, HP per foot (approx.) ** Bi - Fold Wing ****See page 70 for harrow weights (approx. lbs/ft) Minimum 50lbs per ft recommended in many soil types (do not exceed 100 lb/ft) STANDARD FEATURES: 2 Types of Blades: Tires Mainframe Recap Truck tire Tires Wings -Front: 22 x 5mm -shallow concave discs (rubber) 12' 6 Bolt 11L x 15 F 20' - 41' All wings -Rear: 22 x 5mm - 8 wave coulters (coil) 16' - 24' 8 bolt 305/70x R L x 15 6 bolt load range D Cat. 3 or 4 hitch (please specify) 28 & 31' 8 bolt 305/70 x R ' - All Wings Hydraulic self-leveling frame (4 x 6 ) 41 & 36 (3 section) 8 bolt 425/70 x R /70R bolt tires Hydraulic single point depth control 41' (5 section) - 10 bolt R x 22.5 Walking tandems on Main Frame and wings 50' (5 section) - 10 bolt R x 22.5 (Exception: Single wheels on 20' wings) Hydraulic telescope w/cushion hitch standard on 36, 41, 41 BiFold and 50' models Example Layout: 2 rows of shallow concave blades ahead of wavy coulters on 5" spacing 58

59 I " Shallow Concave Blades ahead of Wavy Coulters. Overall spacing: 5", Concave blade spacing: 15" Harrow Attachments (Including Base Price) OPTIONS: FRAME OPTIONS: Axle pivot grease bank (3 section frame only up to 31') $313 Weight kit 100 lb (do not exceed 100 lb/ft) $198 each Hydraulic telescope (no cushion) (12' to 31' models) $1,000 Cat. 4 Articulating Implement Hitch Upgrade $180 12' $48,096 $49,539 $50,739 $52,455 Cat. 5 Solid Hitch Upgrade (PP53XL). $65 16' $71,734 $73,657 $75,257 $77,545 Cat. 5 Articulating Implement Hitch Upgrade $300 20' $79,215 $81,619 $83,619 $86,479 24' $86,736 $89,621 $92,021 $95,453 TIRE OPTIONS: 28' $98,079 $101,445 $104,245 $108,249 Upgrading 11L D Tire to Recap 245/70 x 19.5 $212/Tire 31' $106,822 $110,549 $113,649 $118,082 Upgrade 10 bolt 425 to 10 bolt new R22.5 on mainframe 36' $137,088 $141,416 $145,016 $150,164 (50' models only)... $345/Tire 41'** $164,531 $169,460 $173,560 $179,423 41' $151,639 $156,568 $160,668 $166,531 TOW HITCH OPTIONS: 50'** $199,874 $205,885 $210,885 $218,035 Adjustable tow hitch (One man hook-up) $3,109 - Choose hitch - Single OR Double clevis Included NOTE: Base machine requires 2 hydraulic circuits. Each additional - Includes lighting connection for trailing implement hydraulic option will require an additional hydraulic circuit. - Choice of drop down or tow hitch insert. Hydraulic lines and quick coupler to tow hitch NEW FEATURE!! Rubber Mounted rolling harrow baskets are now - from tractor remotes... $440 standard on manual adjust and hydraulic rolling harrow packages. Tow Hitch upgrade (36' and up) - required to tow carts with capacities over 700 bushel. $1,576 HARROW OPTIONS: NOTE: Special hydraulic/electrical kit required to tow air carts behind I-Series machines - Call for pricing Model Size Coil Tine & Single 14 Roller (no hydraulics) Hyd. Adjust Coil Tine & Manual 14" Roller Harrow Dirt Shield Hardened Tines NOTE: See attachments section for more options Manual Coil Tine & Hydraulic Lift Roller $42/ft $40/ft Hyd. Adjust Coil Tine & Hydraulic Lift Roller 59

60 Intentionally Blank 60

61 INDEPENDENT SERIES I-5100 Heavy Duty Rubber Suspension Coulter Mounts 22" Shallow Concave Blades 5" Spacing I-5100 Heavy Duty Rubber Suspension Coulter Mounts - 22" Shallow Concave Blades 5" Spacing Select category to match draw pin diameter and tractor horse power. Hitch Pin Chart Draft Load Category 3 Category 4 1 1/4-1 1/2" dia. 1 5/8-2 dia. Up to 250 hp Up to 400 hp Category /4" dia. Up to 670 hp NOTE: Hitch wear caused by smaller pin size or larger hp than recommended voids hitch warranty. 61

62 I Heavy Duty Rubber Suspension Coulter Mounts 22" Shallow Concave Blades 5" Spacing Rubber suspension coulter mounts 22", Five bolt shallow concave blades Example Layout: Rows of shallow concave blades on 5" spacing CONFIGURATION SPECIFICATIONS Model Size Working Width Base Price # of Concave Blades* Transport Height Trans. Width Approx. weight with Standard Harrows (lbs) 12' 12' 1" $47, no wings 13'10" 11,100 16' 3-pc Flat Fold 15'5" $61, ' 11'6" 15,600 19' 18'9" $72, '3" 15'2" 20,700 22' 22'1" $81, '4" 15'2" 22,800 25' 25'5" $91, '5" 15'2" 24,000 29' 28'9" $102, '7" 15'2" 27,900 36' 35'5" $131, '6" 20'6" 37,200 39' 38'9" $140, '11" 20'6" 38, HP per foot (approx.) varies by soil type, speed and operating depth ****See page 70 for harrow weights (approx. lbs/ft) * Blade count does not include 3-5 guide coulters per machine STANDARD: Tires Tires Wings Blades: 12' & 16' - Dual wheels 19, 22', 25' & 29-11L x 15 6 Bolt load range D 22 x 5mm -shallow concave discs 19' - Dual wheels on main, single wheels wings 36' - 39' 8 Bolt 12.5L x 15 F Highway service tire 2 Guide Coulter 25 x 1/4" (6.5mm) Flat Smooth Blade 22' - 39' - Dual wheels on main frame and wings 1 Center Coulter with 22 x 8 Wave Blade Single Fixed Gauge Wheels on Models 19' - 39' per wing Cat. 3 or 4 hitch (please specify) Tires Mainframe Hydraulic self-leveling frame (4 x 6 ) 12' Bolt 305 x 22.5 Recap Truck Tire Hydraulic single point depth control 36' - 39' - 10 Bolt R x 22.5, Recap truck tire Tires Gauge Wheels 11L x 15 6 Bolt load range D Hydraulic telescope hitch w/cushion 62

63 I Heavy Duty Rubber Suspension Coulter Mounts 22" Shallow Concave Blades 5" Spacing OPTIONS: FRAME OPTIONS: HARROW OPTIONS: Cat. 4 Articulating Implement Hitch Upgrade $180 Harrow Dirt Shield $40/ft Cat. 5 Solid Hitch Upgrade (PP53XL) $65 Hardened Tines $40/ft Cat. 5 Articulating Implement Hitch Upgrade $300 3 Bar 1/2" Coil Tine Only BLADE OPTIONS: Upgrade to 22" Notched Blades in lieu of smooth Upgrade to 24" x 6.5mm ultra low concave blades $9 blade $19 /blade Model Size 3 Bar 1/2" Coil Tine & Single 14" Roller Manual Coil Tine & Hyd. Lift Roller Hyd. Adjust Coil Tine & Hyd. Lift Single 14" Roller Upgrade to 24" Notched Blades in lieu of smooth $28 ea 12' $50,825 $54,980 $56,862 $58,578 16' 3-pc Flat Fold $66,959 $72,498 $75,008 $77,296 19' $78,794 $85,718 $88,856 $91,716 TIRE OPTIONS: 22' $88,848 $96,984 $100,671 $104,032 Upgrade 11L D Tire to Recap 245/70 x 19.5 $212 /Tire 25' $99,949 $109,124 $113,282 $117,071 Upgrade 12.5 to 8 Bolt 305/70 x R22.5 $226 /Tire 29' $111,500 $121,598 $126,174 $130,345 Tire Scraper (Mainframe).. $800 set of 4 36' $142,541 $154,831 $160,401 $165,478 Tire Scraper (Wings)... $800 set of 4 39' $153,009 $166,373 $172,429 $177,949 TOW HITCH OPTIONS: NEW FEATURE!! Rubber Mounted rolling harrow baskets are now Adjustable tow hitch (One man hook-up). $2,522 standard on manual adjust and hydraulic rolling harrow packages. - Includes top brace & lighting connection for trailing implement Hydraulic lines and quick coupler to tow hitch - from tractor remotes... $440 NOTE: Base machine requires 3 hydraulic circuits. Each additional hydraulic option will require an additional hydraulic circuit. NOTE: See attachments section for more options I-5100 manual adjust tine & roller packages cannot be upgraded to hydraulic adjust. 63

64 Intentionally Blank 64

65 Intentionally Blank 65

66 COIL-TECH COULTER I Coil-Tech Coulter I, 1 1/4" Blade Mounts - 20" Wavy Coulters Single Coulter System $530 per coulter** 20 or more springs $455 per coulter** Options: Standard Specifications: 1 ¼ spring steel shaft Swivel mount standard. Mount sizes available to fit any tool bar * Extra heavy-duty hub and spindle. 4 Bolt Coulter hub and blade pattern Includes: Swivel mount for 4 x 6 Beam Mounting hardware Choice of Blade (17 OR 20 8 OR 13 Wave) Salford Drop mounts in lieu of Std. Cast mount.. Salford Custom Variable Height Mount. ** DOES NOT QUALIFY FOR PARTS PROGRAM PRICING / TERMS $13.00 /coulter $50.00 /coulter Item Description ASSY, 1-1/4 SWVL CAST MNT COULT,17-8W,LH ASSY, 1-1/4 SWVL CAST MNT COULT,17-8W,RH ASSY,1-1/4 SWVL CAST MNT COULT,17-13W,LH ASSY,1-1/4 SWVL CAST MNT COULT,17-13W,RH ASSY, 1-1/4 SWVL CAST MNT COULT,20-8W,LH ASSY, 1-1/4 SWVL CAST MNT COULT,20-8W,RH ASSY,1-1/4 SWVL CAST MNT COULT,20-13W,LH ASSY,1-1/4 SWVL CAST MNT COULT,20-13W,RH 66

67 COIL-TECH COULTER II Coil-Tech Coulter II, 1 5/8" Blade Mounts - 22" Wavy Coulters Single Coulter System $735 per coulter** 20 or more springs $632 per coulter** Standard Specifications: 1 5/8 spring steel shaft Swivel mount standard. Mount sizes available to fit any tool bar * Extra heavy-duty hub and spindle. Options: 5 Bolt Coulter hub and blade pattern Includes: Swivel mount for 4 x 6 Beam Mounting hardware Choice of Blade (22 8 OR 13 Wave) Salford Drop mounts in lieu of Std. Cast mount.. $15.00 /coulter * Additional Requirements: Please specify beam dimensions when ordering. Custom mounting (hardware may be required for beams sizes other than 4 x6 ) Additional Equipment/Hardware may be required based on application. Item Description ASSY,1-5/8 SWVL CAST MNT COULT,22-8W,LH ASSY,1-5/8 SWVL CAST MNT COULT,22-8W,RH ASSY,1-5/8 SWVL CAST MNT COULT,22-13W,LH ASSY,1-5/8 SWVL CAST MNT COULT,22-13W,RH ** DOES NOT QUALIFY FOR PARTS PROGRAM PRICING / TERMS 67

68 INDEPENDENT SERIES BROADCAST SEED AND FERTILIZER ATTACHMENT Broadcast kit $86/ft - Includes broadcast diffusers and mounting hardware (does not include air distribution system) - Diffusers are spaced 15" to 18" apart for an average 50% overlap of product. (5-6 diffusers every 90") Stand Alone Air Distribution Tower kits for I-Series (does not include broadcast diffusers) 1" line air distribution system for seed and fertilizer (6-10 outlet towers) -Includes: One tower, 25' of 2 1/2" feeder hose, 2 1/2" quick disconnects, 1" tower head (6-10 outlet) and 100' of 1" secondary hose $750 per tower 1 1/4" line air distribution system for seed and fertilizer (6-10 outlet towers) - Includes: One tower, 25' of 2 1/2" feeder hose, 2 1/2" quick disconnects, 1 1/4"" tower head (6-10 outlet) and 100' of 1 1/4" secondary hose $857 per tower Warranty: 1 year from date of purchase on entire assembly, excluding disc blades 68

69 Intentionally Blank 69

70 SALFORD HARROW ATTACHMENTS Harrow Page B - Pricing Per Foot Harrow Type Visual Weight / ft. (approx.) Price per ft 3 bars of Heavy Duty 1/2 coil tine 65 lbs $264 3 bar HD 1/2 coil tine, single 11" Roller 94 lbs $462 3 bar HD 1/2 coil tine, single HD 14 roller 106 lbs $518 3 bars of 3/8 coil tine ** 46 lbs $185 3 bars of 3/8 coil tine, single 11" Roller ** 80 lbs $384 2 bars of 3/8 coil tine, double 11" Rollers ** 113 lbs $516 Single 11" Roller 41 lbs $216 Double 11" Roller 78 lbs $362 Single HD 14 roller 56 lbs $275 Double HD 14 roller 101 lbs $518 3/4 buster bar 33 lbs $162 3/4 buster bar, single 11" Roller 59 lbs $366 3/4 buster bar, double 11" Roller 89 lbs $500 * Prices include mounting hardware but NOT extensions. 8 extensions add $23 /foot 12 extensions add $24 /foot 16 extensions add $32 /foot 24 extensions add $43 /foot 30 extensions add $55 /foot 30 extensions for Rippers (includes 4 x4 tube) $63 /foot Adjustable Extension kit for Disc $83 /foot More than 6 = Extensions 70

71 Extensions Required??? Check Popular Manufacturer s Mounting Hardware Specifications sheet for details on machine. If not listed, check distance from the rear of the farthest most shank or beam to the rear mounting bar that harrows will be mounted on. If the tine or shank is more than 6 past the harrow mounting beam than extensions are required. PLEASE NOTE: Some manufacturers machines are not designed to carry the weight of some of the available harrow options. Additional bracing and frame modifications may be necessary and are not supplied by Salford. Check with manufacturer of machine for warranty considerations. SALFORD DOES NOT ACCEPT ANY LIABILITY FOR MACHINE FAILURES DUE TO OVERLOADING. **3/8" Tines are recommended for S-Tine Cultivators only WARRANTY: 1 Year Limited 71

72 POPULAR MANUFACTURER'S MOUNTING HARDWARE If your machine is not shown below call Salford for more information Manufacturer: Harrow types that require extensions Ext. Size (2 arms and extensions req'd per roller) Beam Size: (Width x Height) Hardware Size: (Hardware included in pricing) DMI tiger-mate II Only tine harrow comb. 8 EXT. 3 x4 beam 5/8 x4-4 1/2 U-BOLTS Ezee-On 5100 All combinations 8 EXT. 4 x4 beam 5/8 x4-5 1/2 U-BOLTS International 4300 All combinations 8 EXT. 4 x4 beam 5/8 x4-5 1/2 U-BOLTS International 4400 Only tine harrow comb. 8 EXT. 4 x4 beam 5/8 x4-5 1/2 U-BOLTS International 4500 Only tine harrow comb. 8 EXT. 2 1/2 x2 1/2 beam 5/8 x2 1/2-4 U-BOLTS International 4600 All combinations 8 EXT. 3 x4 beam 5/8 x4-4 1/2 U-BOLTS International 4800 All combinations 8 EXT. 3 x4 beam 5/8 x4-4 1/2 U-BOLTS John Deere 940 C-shank only 8 EXT. 3 x3 beam 5/8 x3-4 1/2 U-BOLTS John Deere 960 C-shank only 8 EXT. 3 x3 beam 5/8 x3-4 1/2 U-BOLTS John Deere 980 C-shank only 8 EXT. 3 x4 beam 5/8 x4-4 1/2 U-BOLTS John Deere 1000 C-shank only 8 EXT. 3 x3 beam 5/8 x3-4 1/2 U-BOLTS John Deere 1010 C-shank only 8 EXT. 3 x3 beam 5/8 x3-4 1/2 U-BOLTS John Deere 1050 C-shank only 8 EXT. 3 x3 beam 5/8 x3-4 1/2 U-BOLTS John Deere 2200 C-shank only 8 EXT. 4 x4 beam 5/8 x4-5 1/2 U-BOLTS John Deere 2210 C-shank only 8 EXT. 4 x4 beam 5/8 x4-5 1/2 U-BOLTS John Deere 2400 Chisel Plow 30 EXT. 4 x4 beam 5/8 x4-5 1/2 U-BOLTS John Deere all S' tine MODELS All combinations 8 EXT. SEE ABOVE MODELS SEE ABOVE MODELS Wilrich 2500 Only tine harrow comb. 8 EXT. 2 1/2 x2 1/2 beam 5/8 x2 1/2-4 U-BOLTS Wilrich 3400 All combinations 8 EXT. 3 x4 beam 5/8 x4-4 1/2 U-BOLTS Wilrich 3411 All combinations 8 EXT. 3 x4 beam 5/8 x4-4 1/2 U-BOLTS Wilrich 3420 All combinations 8 EXT. 3 x4 beam 5/8 x4-4 1/2 U-BOLTS Wilrich 4800 All combinations 24 EXT. 4 x4 beam 5/8 x4-5 1/2 U-BOLTS Wilrich Excel All combinations 8 EXT. 3 x4 beam 5/8 x4-4 1/2 U-BOLTS Kongskilde SBC All combinations 12 EXT. 6 x4 beam 5/8 x4-7 1/2 - U-BOLTS Kongskilde Triple KKK NO EXT. NO EXT. 1/2 x2 flat bar 5/8 x2 bolts & pull up plates Kongskilde PGB NO EXT. NO EXT. 1/2 x3 flatcar 5/8 x2 bolts & pull up plates Kongskilde SBC 3500 NO EXT. NO EXT. 2 x3 beam 5/8 x3-3 1/2 - U-BOLTS Kongskilde 8200 NO EXT. NO EXT. 4" x 4" 5/8 x4-5 1/2 U-BOLTS 30 extensions fit most machines on rear beam to set harrows behind shank pivot area (2 extensions per roller) Place order with beam size (width by height) to ensure correct hardware is supplied WARRANTY: 1 Year Limited 72

73 Intentionally Blank 73

74 PATHFINDER CART CUSTOMER QUESTIONAIRE PLEASE REVIEW THESE KEY QUESTIONS WITH THE CUSTOMER PRIOR TO QUOTE OR SALE TO ENSURE ALL REQUIREMENTS ARE PROPERLY DEFINED 1.) WHAT IMPLEMENT WILL THE CART BE ATTACHED TO? FACTORS TO CONSIDER ARE: A) IF IT IS A PLANTER, IS THERE AN ADEQUATE LOCATION TO BOLT A STAND-OFF BALL HITCH? B) WHAT DOES THE IMPLEMENT LOOK LIKE IN TRANSPORT MODE? IS ATTACHING THE CART STILL FEASIBLE? C) WILL THERE BE ANY INTERFERENCE WITH THE STEERING SYSTEM? IS THERE A RISK OF CONTACT BETWEEN THE WHEELS OF THE CART AND THE IMPLEMENT WHEN TURING? D) IS THE IMPLEMENT CAPABLE OF CARRYING UP TO 1000 LBS OF TONGUE WEIGHT? NOTE: THE MALE BALL HITCH IS DESIGNED TO BOLT DIRECTLY TO THE FRAME OF THE IMPLEMENT. IN SOME CASES, A SPECIAL HITCH MAY NEED TO BE FABRICATED TO COMPENSATE FOR POTENTIAL INTERFERENCE BETWEEN THE CART AND IMPLEMENT. PLEASE CONTACT THE FACTORY FOR OTHER OPTIONS IF REQUIRED. 2.) IS STEERING REQUIRED? FACTORS TO CONSIDER ARE: A) DOES THE CUSTOMER WISH TO AVOID RUNNING OVER THE SEED ROW OR STRIP WHEN STEERING AROUND OBSTACLES IN THE FIELD? B) IS THE CUSTOMER PROVIDING THEIR OWN TIRES? WIDE OR TALL TIRES CAN LIMIT OR EVEN PREVENT THE CART FROM STEERING C) REMOVING THE STEERING REQUIRES THAT THE CART BE HITCHED FURTHER BEHIND THE IMPLEMENT TO AVOID CONTACT WHILE TURNING. (I.E. ON AN I-SERIES, THE HITCH POINT MUSH BE BEHIND THE HARROWS) 3.) WHAT AXLE SPACING IS REQUIRED? 120" (STANDARD) = 20" OR 30" ROWS 152" = 38" ROWS 144" = 36" ROWS 160" = 40" ROWS 4.) IS A TOW-HITCH REQUIRED? FACTORS TO CONSIDER ARE: A) WHAT WILL BE TOWED? THE PATHFINDER TOW-HTICH IS DESIGNED FOR SINGLE OR DUAL TANK ANHYDROUS CARTS. B) WHAT TYPE OF HITCH CLEVIS IS REQUIRED? THIS WILL NEED TO BE SPECIFIED ON THE ORDER. 74

75 PATHFINDER Steerable Cart Cart only - No Mounted Package, 120" to 160" Axle Spacing Available 8-Ton Chassis 10-Ton Chassis BASE PRICE 8-Ton $25, Ton $28,290 STANDARD FEATURES: OPTIONS: Double Ball hitch on Pivoting Beam* Rear Draw Bar Hitch $865 Tie-Rod Steering I-Series Tow-Hitch Double Ball Insert for Pathfinder (Required $ " to 160" Adjustable Axle Spacing Available to tow Non-Steering carts behind I-Series; I-Series Tow Hitch required ) High Axle Under-Beam Clearance Pick-up Truck Ball Receiver Hitch $ /90R46 Tires on 10 Bolt Rims 480/80R46 Tires on 10-Bolt Rims (in lieu of Standard Tires) $1,916 Ready to receive ST6 or ST8 mounted systems Remove Steering... <$2200> DEDUCT *Hitch adaptor may be required for connection to some implements. Additional cost may be incurred. IMPORTANT: Removeing Steering requires that the hitch point moves behind the implement to avoid collision while turning. 75

76 ST SERIES CUSTOMER QUESTIONAIRE PLEASE REVIEW THESE KEY QUESTIONS WITH THE CUSTOMER PRIOR TO QUOTE OR SALE TO ENSURE ALL REQUIREMENTS ARE PROPERLY DEFINED 1.) WHAT TYPE OF IMPLEMENT WILL THE ST BE PAIRED WITH? (I.E. STRIP-TILL, PLANTER, I-SERIES?) 2.) WILL THE ST BE DIRECTLY MOUNTED TO THE IMPLEMENT OR TOWED BEHIND ON A PATHFINDER? (IF MOUNTING TO A PATHFINDER CART, PLEASE ALSO FILL OUT QUESTIONAIRE ON PAGE XX) 3.) IF MOUNTING DIRECTLY ON IMPLEMENT, HAS THE IMPLEMENT MANUFACTURER BEEN CONSULTED FOR LOAD CAPACITY LIMITATIONS? (DIFFERENT LADDER AND PLATFORM CONFIGURATIONS ARE AVAILABLE FOR SKID MOUNT UNITS) 4.) IF MOUNTING DIRECTLY ON IMPLEMENT, HAVE THE DIMENSIONS OF THE ST HOPPER BEEN CHECKED AGAINST AVAILABLE SPACE ON THE IMPLEMENT? FACTORS TO CONSIDER ARE: A) WINGS FOLDED AND UNFOLDED B) TRANSPORT HEIGHT C) LADDER AND PLATFORM POSTION, ACCESS TO HOPPER FILLING D) ROOM UNDERNEATH VENTURI BOXES FOR CALIBRATION 5.) DOES THE CUSTOMER'S TRACTOR HAVE ADEQUATE HYDRAULICS TO RUN BOTH THE IMPLEMENT AND THE ST HOPPER? FACTORS TO CONSIDER ARE: A) psi operating pressure minimum must be reserved to run the ST hopper; consider flow required to run implement lift hydraulics, planter vacuum meters, etc. on top of this) B) FAN REQUIRES A CASE DRAIN. C) FOR MAXIMUM PERFORMANCE, ¾ SPOOL VALVES ARE REQUIRED FOR FAN. ½ VALVES LIMIT FAN SPEED. 6.) IS SECTION CONTROL REQUIRED? FACTORS TO CONSIDER ARE: A) ST-10 USES 8 ELECTRIC CLUTCHES FOR 4-SECTIONS (4.5 AMPS EACH = 36 AMPS); CAN TRACTOR PROVIDE THIS? B) ST-6 / ST-8 2-SECTION CONTROL MAY REQUIRE MORE HYDRAULIC OR ELECTRICAL CAPACITY DEPENDING ON APPROACH 76

77 7.) HOW MANY OUTLETS ARE REQUIRED OFF OF THE METER? FACTORS TO CONSIDER ARE: A) 24, 32 & 36 ROWS REQUIRES SPLITTERS WITH 12, 16, & 18 OUTLET MANIFOLDS RESPECTIVELY B) 6 & 18 OUTLET SYSTEMS ON ST-10 REQUIRES BLOCKER KITS ON METERS C) ODD NUMBERS OF ROWS REQUIRES BLOCK KITS ON METERS ON ALL ST MODELS 8.) WHAT IS THE CUSTOMER'S EXPECTATION FOR APPLICATION RATES? FACTORS TO CONSIDER ARE: A) NUMBER OF ROWS AND SWATH WIDTH (12 ROWS ON 30" SPACING VS. 12 ROWS ON 36" SPACING) B) DESIRED GROUND SPEED (RATE CAPABILITIES DECREASE WITH HIGHER GROUND SPEED) C) TRACTOR HYDRAULIC CABABILITIES (ARE HYDRAULICS CAPABLE OF OPERATING FAN AT REQUIRED SPEED?) D) METER ROLLER TYPE: (<50 LBS = LOW RATE PEGGED; 50<RATE<500 LBS = STANDARD PEGGED; 500 LBS<RATE = FLUTED) 9.) WHAT CONTROLS WILL BE USED WITH THE ST-HOPPER? FACTORS TO CONSIDER ARE: A) WILL SALFORD OR THE CUSTOMER BE PROVIDING THE CONTROLS? B) METER SPEED, FAN SPEED, BIN LEVEL SENSORS AND PWM'S ARE PROVIDED AS STANDARD C) IF THE CUSTOMER WISHES TO INSTALL THEIR OWN CONTROLS ON AN ST-10 CAN IT HANDEL THE AMPS? D) FOR MUELLER ISOBUS, IS THE CUSTOMER'S DISPLAY COMPATIBLE? E) MANY THIRD PARTY SYSTEMS CANNOT HANDLE 2 PRODUCT + SECTION CONTOL IN TASK CONTROLLER 10.) WHAT SIZE OF AIR LINES ARE COMING OFF OF THE METER? 6-OUTLET = 2" 12-OUTLET = 2 1/2" 18-OUTLET* = 2" 8-OUTLET = 2 1/2" 16-OUTLET* = 2" 11.) ARE HOSE COUPLERS REQUIRED? (RECOMMENDED FOR EASY DETACH FROM IMPLEMENT) (Note hose size off of meters when selection couplers*; see accessories page for coupler options) *On 16 outlet systems, the outer 3 runs on each side increase from 2" to 2 1/2" at the hose coupler; on 18-outlet systems the same applies to the outer 4 runs on each side - 2" to 2 1/2" couplers are available on the accessories page 77

78 12.) ARE AIRLINE SPLITTERS REQUIRED? (2" lines split into 2 x 1 1/2" airlines; 2 1/2" lines split into 2 x 1 3/4" lines) 13.) ARE AIRLINES RUNNING TO ROW UNITS/SHANKS OR BROADCAST DEFLECTORS? FACTORS TO CONSIDER ARE: A) SUB-SURFACE APPLICATION (OPENERS/SHANKS) REQUIRE AIR DIFFUSERS (PREVENTS BACK PRESSURE) B) WHEN USING DIFFUSERS, NOT INLET HOSE SIZE AND OUTLET HOSE SIZE (2" x 1 1/4" or 2 1/2" x 1 1/2") C) BROADCAST DEFLECTORS DO NOT REQUIRE AIR DIFFUSERS D) NOTE INLET SIZE FOR BROADCAST DEFLECTORS** (2 1/2", 2", 1 3/4", 1 1/2") E) DIFFUSER MOUNTS ARE AVAILABLE FOR SWITCHBLADE SHANKS (NOTE CLEARANCE WHEN SHANKS RETRACT WHEN MOUNTING TO AVOID CRUSHING ON FRAME) F) HOW MUCH 1 1/4" X 1 1/4" TUBE AND MOUNTING BRACKETS IS NEEDED TO MOUNT BROADCAST DIFFUSERS? G) WHAT SIZE OF TUBE WILL THE BROADCAST MOUNTING BRACKET BE CONNECTING TO? H) ON AN I-SERIES MACHINE, IT IS CONSIDERED BEST PRACTICE TO MOUNT THE BROADCAST SYSTEM ON THE FRON I) ON A 5100, IT IS CONSIDERED BEST PRACTICE TO MOUNT THE BROADCAST DEFLECTORS BETWEEN THE REAR COULTERS AND TINE HARROWS **REMEMBER THAT INLET SIZES WILL VARY ON 16 & 18 OUTLET METERING SYSTEMS SEE AIR SYSTEM LAYOUT TEMPLATES ON FOLLOWING PAGES 78

79 TILLAGE IMPLEMENT & PATHFINDER TEMPLATE BROADCAST DEFLECTORS (MOUNT IN FRONT OF LIGHT TILLAGE) DIFFUSERS (FOR IN-FURROW APPLICATION) NOTE SHANK KNIFE TUBE DIA. HOSE HOLDERS AIR LINE SPLITTERS USE ACCORDING TO REQUIRED NUMBER OF OUTLETS TIP: Split the air stream as late as possible in the air line while trying to maintain equal hose lengths from the splitter to the outlet. HOSE COUPLERS (EASES DISCONNECT OF CART FROM TOOLBAR) BROADCAST DEFLECTORS (MOUNT IN FRONT OF FINISHING HARROWS FOR HEAVIER TILLAGE TOOLS) IMPORTANT: Ensure rises, drops and bends in hoses are minimized as much as possible for maximum airflow efficiency IMPORTANT: For non-steerable carts, the hitch point much be located behind the implement to avoid contact while turning (the hitching point shown is for a steerable cart) 79

80 TOOLBAR/PLANTER & PATHFINDER TEMPLATE DIFFUSERS (FOR IN-FURROW APPLICATION) NOTE SHANK KNIFE TUBE DIA. HOSE HOLDERS IMPORTANT: Ensure rises, drops and bends in hoses are minimized as much as possible for maximum airflow efficiency HOSE COUPLERS (EASES DISCONNECT OF CART FROM TOOLBAR) AIR LINE SPLITTERS USE ACCORDING TO REQUIRED NUMBER OF OUTLETS (REQUIRED FOR 24, 32 & 36 ROWS) TIP: Split the air stream as late as possible in the air line while trying to maintain equal hose lengths from the splitter to the outlet. 80

81 HOPPER DIRECT MOUNT TEMPLATE IMPORTANT: Consult with the implement manufacturer before direct mounting an ST-Series box. IMPORTANT: Check for clearance around the hopper in both operating and folder position. DIFFUSERS (FOR IN-FURROW APPLICATION) NOTE SHANK KNIFE TUBE DIA. HOSE HOLDERS IMPORTANT: Ensure rises, drops and bends in hoses are minimized as much as possible for maximum airflow efficiency Leave enough slack in lines for wing folding AIR LINE SPLITTERS USE ACCORDING TO REQUIRED NUMBER OF OUTLETS (REQUIRED FOR 24, 32 & 36 ROWS) TIP: Split the air stream as late as possible in the air line while trying to maintain equal hose lengths from the splitter to the outlet. 81

82 Valmar ST-6, 6 Ton Single Product Delivery Fertilizer Bander (CN 2524) Shipping Information: Height - 94" Width - 96" Length - 82" (112" w/platform) Weight lb. NOTE: 6, 8, 12, 16, or 18 outlet stainless steel manifold/venturi sets are not included - order separately. Base Price $21,600 ST-6: Single tank, single meter dry product air delivery STANDARD FEATURES: 185 Cubic Foot, Poly Tank Holds 6 Tons Ladder And Platform Single Product Metering Hopper Screen Assemblies *NEW* Hyd Metering w/flow control valves (PWM), meter encoders, fanspeed sensors, bin level sensor, meter hydraulics plumbed (specify required hose length if skid mount) Metering Control Packages Available In Options Page Order Separately Standard Mounting Leg Assembly With Hardware May Require Customer Modification *NEW* Plastic Pegged Metering Rollers And Bottoms With Shut-Off Slide Gates Available 6, 8, 12, 16 Or 18 Outlet Stainless Steel Manifold / Venturi Sets Are Not Included Order Separately Hydraulic Fan Drive Requires PSI Min. The 3/4 Hyd Lines To Tractor And Fittings Are Not Included (Unless Ordered With Pathfinder Cart) NOTE: Case drain required. (2) Coils 100 Feet X 2 or 2 ½ Id Delivery Hose Some installations may require additional 2 or 2 ½ hose see options for pricing Base Price Does Not Include: Manifold & Venturi Assembly / Openers / Boots / Knives / Air Diffusers / Airline Splitters May Require Additional 2 Or 2 ½ Id Delivery Hose See Accessories Page 82

83 Valmar ST-6-6 Ton, Single Product Delivery Fertilizer Bander (CN 2524) Options PART NO. METER OPTIONS SUGGESTED RETAIL PRICE (2) Low Rate Pegged Meter Rollers (Set of 2) $480 PART NO. Manifold And Venturi Assemblies* SUGGESTED RETAIL PRICE Manifold And Venturi Ass Y 6 Outlet 2 $1, Manifold And Venturi Ass Y 8 Outlet 2 ½ $1, Manifold And Venturi Ass Y 12 Outlet 2 ½ $1, Manifold And Venturi Ass Y 16 Outlet 2-2 ½ $1, Manifold And Venturi Ass Y 18 Outlet 2-2 ½ $2,010 * Each assembly comes with two manifolds (i.e. 6 outlet = 3 + 3); PART NO. Air Diffusers SUGGESTED RETAIL PRICE Kit- Air Diffuser 6 Row C/W 1.25 Id X 20 Drop Hose & Hose Clamps - Does Not Include Mount Bracket $ Kit- Air Diffuser 8 Row C/W 1.25 Id X 20 Drop Hose & Hose Clamps - Does Not Include Mount Bracket $ Kit- Air Diffuser 12 Row C/W 1.25 Id X 20 Drop Hose & Hose Clamps - Does Not Include Mount Bracket $1, Kit- Air Diffuser 16 Row C/W 1.25 Id X 20 Drop Hose & Hose Clamps $1,836 - For Use With 2.5 (Includes: (2.5 Id Hose X 100 ) - Does Not Include Mount Bracket Kit- Air Diffuser 18 Row C/W 1.25 Id X 20 Drop Hose & Hose Clamps $2,244 - For Use With 2.5 Hose (Includes: (2.5 Id Hose X 100 ) - Does Not Include Mount Bracket PART NO. Extra Options SUGGESTED RETAIL PRICE Kit Quick Connect Hose Coupler 8 Row $ Kit Quick Connect Hose Coupler 12 Row $ Kit Quick Connect Hose Coupler 16 Row $ Kit Quick Connect Hose Coupler 18 Row $480 PART NO. Control Packages SUGGESTED RETAIL PRICE Mueller ISOBUS Controls $3,500 ISOBUS 15' Extension Cable $780 Digi-Star Scale Kit w/cab Readout $2,559 Digistar Scale-Link Scale Kit (for ISOBUS displays ) $2,968 PWM Valve, Meter Plumbing and Sensors Deduct -$1,255 NOTE: PLEASE SEE ACCESSORIES PAGE FOR MORE AIR SYSTEM COMPONENTS 83

84 Valmar ST-8-8 Ton, Dual or Single Product Delivery Fertilizer Bander CN 2531 Shipping Information: Height " Width - 96" Length - 96" (112" w/platform) Weight lb. Base Price $27,663 NOTE: 6, 8, 12, 16, or 18 outlet stainless steel manifold/venturi sets are not included - order separately. ST-8: 8 Ton capacity. 60/40 Split tank, dual meter, single or two dry product air delivery. STANDARD FEATURES: 250 Cubic Foot, Painted, 409 Stainless Steel Hopper Holds 8 Tons Ladder & Platform Use As Single Meter Hopper Or Dual Meter With A 60 / 40 Split Hopper Hopper Screen Assemblies *NEW* Hyd Metering w/flow control valves (PWM), meter encoders, fanspeed sensors, bin level sensor, meter hydraulics plumbed NOTE: Does Include Motors, Mounts & Chain Drives To Metering Req 8 Gpm Each (16 Gpm Total) Metering Control Packages Available In Options Page Order Spearately Standard Mounting Leg Assembly With Hardware On Cn.2531 May Require Customer Modification *NEW* Pegged Plastic Metering Rollers & Bottoms With Shut-Off Slide Gates Available 6, 8, 12, 16 Or 18 Outlet Stainless Steel Manifold / Venturi Sets Are Not Included Order Separately Product Level Sight Gauge & Air Manifold Gauge Hydraulic Fan Drive Requires Psi Min. The ½ Hyd Lines To Tractor & Fittings Are Not Included (Unless Ordered With Pathfinder Cart) NOTE: Case Drain Required (2) Coils 100 Feet X 2 or 2 ½ Id Delivery Hose Some installations may require additional 2 or 2 ½ hose see options for pricing Base Price Does Not Include: Manifold & Venturi Assembly / Openers/ Boots / Knives/ Air Diffusers / Airline Splitters May Require Additional 2 Or 2 ½ Id Delivery Hose See Options Page 84

85 Valmar ST-8-8 Ton, Dual or Single Product Delivery Options Fertilizer Bander (CN 2524) PART NO. METER OPTIONS SUGGESTED RETAIL PRICE Low Rate Pegged Meter Rollers (Set of 2) $480 PART NO. Manifold And Venturi Assemblies* SUGGESTED RETAIL PRICE Manifold And Venturi Ass Y 6 Outlet 2 $1, Manifold And Venturi Ass Y 8 Outlet 2 ½ $1, Manifold And Venturi Ass Y 12 Outlet 2 ½ $1, Manifold And Venturi Ass Y 16 Outlet 2-2 ½ $1, Manifold And Venturi Ass Y 18 Outlet 2-2 ½ $2,010 * Each assembly comes with two manifolds (i.e. 6 outlet = 3 + 3); PART NO. Air Diffusers SUGGESTED RETAIL PRICE Kit- Air Diffuser 6 Row C/W 1.25 Id X 20 Drop Hose & Hose Clamps - Does Not Include Mount Bracket $ Kit- Air Diffuser 8 Row C/W 1.25 Id X 20 Drop Hose & Hose Clamps -Does Not Include Mount Bracket $ Kit- Air Diffuser 12 Row C/W 1.25 Id X 20 Drop Hose & Hose Clamps - Does Not Include Mount Bracket $1, Kit- Air Diffuser 16 Row C/W 1.25 Id X 20 Drop Hose & Hose Clamps $1,836 - For Use With 2.5 (Includes: (2.5 Id Hose X 100 ) - Does Not Include Mount Bracket Kit- Air Diffuser 18 Row C/W 1.25 Id X 20 Drop Hose & Hose Clamps $2,244 - For Use With 2.5 Hose (Includes: (2.5 Id Hose X 100 ) - Does Not Include Mount Bracket PART NO. Extra Options SUGGESTED RETAIL PRICE Kit Quick Connect Hose Coupler 8 Row $ Kit Quick Connect Hose Coupler 12 Row $ Kit Quick Connect Hose Coupler 16 Row $ Kit Quick Connect Hose Coupler 18 Row $480 PART NO. Control Packages SUGGESTED RETAIL PRICE Mueller ISOBUS Controls $3,500 ISOBUS 15' Extension Cable $780 Digi-Star Scale Kit w/cab Readout $2,559 Digistar Scale-Link Scale Kit (for ISOBUS displays ) $2,968 PWM Valve, Meter Plumbing and Sensors Deduct -$1,255 NOTE: PLEASE SEE ACCESSORIES PAGE FOR MORE AIR SYSTEM COMPONENTS 85

86 Valmar ST Ton Fertilizer Bander *NEW* Base Price $30,050 Skid Mount (No Ladder or Platform Included - See Options List ) $32,000 for Pathfinder Cart STANDARD FEATURES: Individually Mounted 120 Cubic Foot and 180 Cubic Foot Plastic Hoppers (60/40 Split) Hopper Screen Assemblies Ladder and Platform (on Pathfinder Configuration Only) Horizontally Opposed Meters Sharing One Air System Entry Point 4-Section Hydraulic Variable Rate Metering Including ST-10 4-Section Metering System Shipping Information: Height - 95" Width - 102" (129" with platform) Length - 127" Weight lb. NOTE: 6, 8, 12, 16, or 18 outlet stainless steel manifold/venturi sets are not included - order separately. Plastic Pegged Meter Rollers Shut-Off Slide Gates Electric Clutches for Sectional Engage/Disengage 8 GPM PWM Valves Metering C Meter Encoders, Fan Speed and Bin Level Sensors Available 6, 8, 12, 16 Or 18 Outlet Stainless Steel Manifold / Venturi Sets Are Not Included Order Separately Hydraulic Fan Drive Requires Psi Min. The ½ Hyd Lines To Tractor & Fittings Are Not Included (Unless Ordered With Pathfinder Cart) (2) Coils 10NOTE: Case Drain Required Base Price Does Not Include: Manifold & Venturi Assembly / Openers/ Boots / Knives/ Air Diffusers / Airline Splitters May Require Additional 2 Or 2 ½ Id Delivery Hose See Options Page 86