Air Seeder Components

Transcription

1 Air Seeder Components Dual Manifold System Equipped with two vertical tubes Horizontal Flow Divider With adjustable flow balance Manifolds for all applications Call for quotes on manifold systems for: >Strip Till >Fertilizer banding >Air Seeding >Full sytems or individual components >Upgrading existing air drills >Compatible with all brand of air seeders Page Manifold Components 2-6 GR99 Monitor Components 7 ISO Monitor Components 8-9 Air Cart Parts

2 MANIFOLD PRICING Order # Price Horizontal Flow Dividers and Stands 6" to 4" divider (standard) $ " to 4" divider (standard) $ " to 4" divider (short) $ Rolling mount 5" $ Rolling mount 6" $ " to 3" divider $ " to 2 ½" divider $ ½" to 2" divider $ " to 3" double divider $ 2, " to 3" double divider $ 2, Primary Vertical Manifold Heads (Steel) 4 Port 4" inlet x 2" outlet $ " inlet x 2 ½" outlet $ " inlet x 2 ½" outlet $ " inlet x 3" outlet $ Port 4" inlet x 2" outlet $ " inlet x 2 ½" outlet $ " inlet x 2" outlet $ " inlet x 2 ½" outlet $ " inlet x 2 ½" " outlet $ Port 4" inlet x 1 1/4" outlet $ " inlet x 1 ½" outlet $ " inlet x 1 ½" outlet (directed ports) $ " inlet x 2" outlet $ " inlet x 2 ½" outlet $ " inlet x 2" outlet $ " inlet x 2 ½" outlet $ " inlet x 2 ½" outlet $ Port 4" inlet x 1 ¼" outlet $ " inlet x 1 ¼" outlet (directed ports) $ " inlet x 1 ½" outlet $ " inlet x 1 ½" outlet (directed ports) $ " inlet x 2" outlet $ " inlet x 2" outlet $ " inlet x 2 ½" outlet $ " inlet x 2 ½" outlet $ Port 4" inlet x 1.25 outlet (directed ports) $ " inlet x 2" outlet $ Port 5" inlet x 1 ¼" outlet $ Port 4" inlet x 1 ¼" outlet $ " inlet x 1 ¼" outlet (directed ports) $ " inlet x 1 ¼" outlet $ " inlet x 1 ¼" outlet (directed ports) $ " inlet x 1/14"outlet $ Port 4" inlet x 1 ¼" outlet $ " inlet x 1 ¼" outlet (directed ports) $ Port 4" inlet x 1" outlet $ " inlet x 1 ¼" outlet $ Phone

3 MANIFOLD PRICING Order # Price 16 Port 5" inlet x 1" outlet $ " inlet x 1 ¼" outlet $ " inlet x 1 1/4" outlet $ Port 4" inlet x 1 ¼" outlet (fabricated) $ " inlet x 1 ¼" outlet $ " inlet x 1 ¼" outlet $ Rubber Impact Pads (laminated to steel plate) 5" dia $ ½" dia $ Primary Manifold Heads (Composite) 24 Port head (without lid) $ Port lid $ /20 Reduction lid $ /18 Reduction lid $ /16 Reduction lid $ /12 Reduction lid $ /10 Reduction lid $ /8 Reduction lid $ Port head (without lid) $ Port lid $ /15 Reduction lid $ Port head (without lid) $ Port lid $ /16 Reduction lid $ /11 Reduction lid $ Flange $ Lock collar $ Easy cap (yellow) $ ½" dia. Rubber impact pad $ Secondary Vertical Manifold Heads Order # Price 3 Port 2 ½" inlet x 1 ½" outlet $ " inlet x 1 ½" outlet $ Port 2" inlet x 1" outlet $ " inlet x 1 ¼" outlet $ ½" inlet x 1 ¼" outlet $ ½" inlet x 1 ½" outlet $

4 Secondary Vertical Manifold Heads (cont) Order # Price 3" inllet x 1 1/2" outlet $ Port 2" inlet x 1" outlet $ " inlet x 1 ¼" outlet $ ½" inlet x 1 ¼" outlet $ ½" inlet x 1 ½" outlet $ " inlet x 1 ½" outlet $ Port 2" inlet x 1" outlet $ " inlet x 1 ¼" outlet $ ½" inlet x 1" outlet $ ½" inlet x 1 ¼" outlet $ ½" inlet x 1 ½" outlet $ " inlet x 1 ¼" outlet $ " inlet x 1½ " outlet $ " inlet x 1 ½ outlet (directed) $ Port 2" inlet x 1" outlet $ " inlet x 1 ¼" outlet $ ½" inlet x 1" outlet $ ½" inlet x 1 ¼" outlet $ Port 2" inlet x 1" outlet $ " inlet x 1 ¼" outlet $ ½" inlet x 1" outlet $ ½" inlet x 1 ¼" outlet $ ½" inlet x 1 ½" outlet $ " inlet x 1 ¼" outlet $ Port 2" inlet x 1" outlet $ " inlet x 1 ¼" outlet $ ½" inlet x 1" outlet $ ½" inlet x 1 ¼" outlet $ " x 1 ¼" outlet $ " inlet x 1 ¼" outlet $ Port 2" inlet x 1" outlet $ " inlet x 1 ¼" outlet $ ½" inlet x 1" outlet $ ½" inlet x 1 ¼" outlet $ " inlet x 1 ¼" outlet $ Port 2" inlet x 1 ¼" outlet $ ½" inlet x 1" outlet $ ½" inlet x 1 ¼" outlet $ Port 2 ½" inlet x 1" outlet $ ½" inlet x 1 ¼" outlet $ " inlet x 1 ¼" outlet $ Port 2 ½" inlet x 1 ¼" outlet $ " inlet x 1 ¼" outlet A $ Port 3" inlet x 1 ¼" outlet $ /4" rubber impact pad $

5 MANIFOLD PRICING Vertical Manifold Tubes Order # Price 2" Diameter (31" tall) $ ½" Diameter (32" tall) $ ½" Diameter (23" tall) $ " Diameter (34" tall) $ " Diameter (28" tall) dimpled $ " Diameter (52" tall) with flange $ " Diameter (58" tall) with flange $ " Diameter (58" tall) without flange $ " Diameter (30" tall) with flange $ " Diameter (62" tall) $ " Diameter (66" tall) $ Expander (for Composite heads) 3" to 4" (w/flange) $ Vertical Manifold Stands For: 2" Tubes (with tube clamps) $ ½" Tubes (with tube clamps) $ " Tubes (with tube clamps and backing plate) $ " Tubes (with tube clamps & backing plate) $ " Tubes (with tube clamps & backing plate) $ " Tubes (with tube clamps & backing plate) $ Pivoting manifold Mount $ Bulk Air Hose 6" Kanaflex - URD red (precut ') $ /ea 6" Kanaflex - URD red (precut ') $ /ea 5" Kanaflex - black (precut ') $ /ea 5" Kanaflex - black (precut ') $ /ea 5" Kanaflex - black (bulk - 100' roll) $ 1, /roll 5" Helleflex - URD red(precut ') $ /ea 4" Kanaflex - black (bulk - 34' roll) $ /ea 4" Flex tubing - stainless (precut ') $ /ea 4" Flex tubing - stainless (precut ') $ /ea 4" Flex tubing - stainless (precut ') $ /ea 3" Kanaflex - URD red (bulk - 100' roll) $ 1, /roll 3" Kanaflex - black (bulk - 100' roll) $ /roll 2 ½" Kanaflex - black (bulk - 100' roll) $ /roll 2" Kanaflex - black (bulk - 100' roll) $ /roll 1 ½" Kanaflex - black (bulk - 100' roll) $ /roll 1 ¼" Kanaflex - black (bulk - 100' roll) $ /roll 1" Kanaflex - black (bulk - 100' roll) $ /roll Hose Clamps 6" spirol $ " spirol clamp $ " double bolt $ " double bolt $ " stainless band $ " wormgear $ " and 2 ½" wormgear $ ½" wormgear $ and 1 ¼" wormgear $

6 Miscellaneous Order # Price Tube Clamps 6" $ (muffler style) 5" $ " $ " (In house fabrication) $ " $ ½" $ " $ 3.85 "U" Bolts ½" 5.5 x 4 x $ 3.85 ⅜" 5.5 x 4 x $ 5.50 Velcro Straps 1 ½" x 24" $ 4.40 Cable Support Kit Diffuser Hitch Extension All hardware $ (including cable & springs) Stainless steel $ (2" to 1 ¼" reduction) Amity, Fargo Aire and Concord $ (allows the flow divider to be mounted to the air carts) Fertilizer Drop Tubes (for Chisel plow shanks) Dry fertilizer (single shoot) $ Dry fertilizer (double shoot) $ NH 3 insert $ Phone

7 AIR CART PARTS (GR99 Series) REPLACEMENT PARTS AIR CART MONITOR (For Models 2800, 3350 and ST250) Before 2009 Tractor Components: Order # Price Monitor head $ Switch box $ Mounting bracket $52.80 Power module $ Mini cable (1 ½ ft) $ Meter mini cable (20 ft) $ Meter main harness (10 ft) $ Air Cart Components Clutch module $ Sensor module $ Fan sensor (round) $ (rectangular) $ Speed sensor (round) $ (rectangular) $ Meter shaft sensor (round) $ (rectangular) $ Bin sensor $ Meter box sensor $ Meter box sensor adaptor cable $ Main harness 3.0 Meter (9.7 ft) $ Meter (16.1 ft) $ Meter (19.3 ft) $ Meter (24.1 ft) $ Mini cable 0.5 Meter (1.6 ft) $ Meter (3.2 ft) $ Meter (6.4 ft) $ Meter (9.7 ft) $ Meter (12.9 ft) $ Meter (19.3 ft) $47.03 Miscellaneous Components 3 Load module $ Seed flow module $ Electric/Hydraulic motor module $ NH 3 module $ Raven adapter for NH 3 module $ Work switch (magnetic) $ Module variable rate RS232 for GR $

8 AIR CART PARTS (ISO SERIES) Tank Components: Order # Price Sensor - Bin (ISO) $ Bracket - Bin sensor (w/backing plate ) $24.20 Sensor - Fan (ISO) (1 ea. - single blower or 2 ea. - double blower) $ Bracket - Fan sensor $26.40 Sensor - Meter box (Turck) $ Harness - Tank Compartment (ISO) short $63.80 Harness - Main air cart $ Harness - Terminating Adaptor (use w/67643 harness) $96.80 Plug - TBC (Plugs into adaptor) $72.60 Air Cart Module $2, Bracket - ECU tank mount (w/ecu cover & hardware) $84.70 Harness - ISO 3 way motor adaptor $73.70 Harness - Meter speed (VR) $81.40 Sensor - Ground speed $ Harness - Adaptor minidin - Deutsch (Between speed sensor & harness) $49.50 Sensor - Speed (GPS) Dickey John $ Harness Adaptor GPS speed (Deutsch) $46.20 Harness - Tank bulkhead / inside tank (sensor to bulkhead) $62.70 Harness - Bin sensor / outside tank (bulkhead to main harness) $39.60 Sensor - Meter shaft (Speed) $80.30 Bracket - Sensor meter shaft $13.20 Bracket - Sensor ground speed $22.77 Harness - Adaptor (ISO) clutch $57.20 Sensor-speed adapter Art160/ $ Optional Tank Components: Harness - Sensor extension (20') 3 pin connector $84.70 Harness - Tank (ISO) extension for 5250 cart in tow between format $ Harness - Pup trailer extension (12') $ Harness - Pup tank (ISO) $ Harness - Adaptor fan sensor (Pup) ISO $61.60 Tool Bar Components: Harness - Main extension (ISO) 6' (9 pin harness only) $ Harness - Main extension (ISO) 45' (9 pin harness only) $ Sensor - Work switch (ISO) magnetic type $82.50 Harness - Extension work switch sensor (20') (used when toolbar ECU not installed) $84.70 iso SLAVE CONNECTOR $ ECU - Toolbar blockage (ISO) Plugs into $ ECU - Toolbar NH 3 or liquids (ISO) plugs into $1, Harness - Toolbar sensors (ISO) Harness adaptor for $ use w/ecu for either and/or Tool bar harness kit including tool bar ECU $2,

9 AIR CART PARTS (ISO SERIES) Tractor Components: Order # Price C1000 Cab kit - Includes: 7inch color screen, all harnesses to install $3, on tractor, standard ISO connector at rear of tractor Includes ram mount for monitor C3000 Cab kit - Includes: 12.1 inch color touch screen, all harnesses to $8, install on tractor, standard ISO connector at rear of tractor Includes ram mount for monitor Tank Components: 2 compartment ISO monitor system, includes: ISO ECU for tank, 1 GPS Speed sensor, 2 bin level sensors, 2 meter box capacitance sensors $6, FOR GROUND DRIVE ADD: QTY PRICE clutch harness $57.20 Shaft sensor brkt $26.40 Shaft sensor $ Muffler clamp $46.20 Fan sensor $ FOR VARIABLE RATE DRIVE ADD: For 2 meter variable rate this kit includes: 2 variable rate motors, $6, mounting brackets, hyraulic hoses, harnesses and a hydraulic block with valves to variably control the variable rate motors. Plumbs into cart fan hydraulics. Hoses may have to be altered to fit your application Fan sensor $ compartment ISO variable rate monitor kit $12, Inlcudes: Harnesses, hydraulic kit, 3 hydraulic meter motors with mounts, 3 bin sensors, 3 meter box capacitance sensors, 1 fan sensor, 1 GPS speed sensor, ECU. Hoses and harnesses may have to be altered to fit your application. Fan sensor $ Implement Components: Work switch and implement harness $1, Work swtich extension $95.70 NH3 electronics kit $1, Requires , this ecu will manage the Raven NH3 valves and meter. Includes harness with 16 pin connector that plugs into the Raven flow cable 9

10 AIR CART PARTS FAN COMPONENTS Order # Price Complete fan assy. (Crary 6" blower with motor) $4, Mount $ Screen (basket only) $ Screen (cover only) $51.54 Motor (hyd.) $3, Sensor bracket (round sensor) $26.40 Impeller / Rotor $ mm taper lock bushing $20.62 Motor shaft seal only (external) $ Sensor bracket (slotted sensor) $ " fabricated blower upgrade w/o motor $2, METER COMPONENTS Calibration kit $ Meter shaft (stainless) $ Meter rollers (stainless) ½ deep $ Meter rollers (stainless) ¼ deep $ Meter roller canola (painted) $ Meter roller low rate (transitional) $ Bearing with flanges $21.45 Rubber washer (bearing seal) $2.20 Set collar $8.58 Shear pin (brass) $8.64 Chain (40 roller) stainless (with links) $59.29 Chain (60 roller) gearbox (with links) $33.28 Chain (60 roller) wheel (with links) $23.70 Upper wiper block (plastic) $91.30 Lower door wiper (rubber) $3.19 Clutch (elec) without sprocket $ Clutch sprocket $ Bracket, meter shaft speed sensor $22.77 Scale, digital (calibration) $55.00 Bag (calibration) $63.25 Flow plate rubber seals $8.03 Meter door latch assembly $38.50 MISCELLANEOUS COMPONENTS Top door gasket $ U bolt (top door clamp) $6.05 Screen basket w/cover $ Jack (front draw pole) $ ph

11 AIR CART PARTS AXLE AND HUB ASSEMBLIES Order # Price Front trunion RH $ Front trunion LH $ Rear axle (120 ) RH $1, Rear axle (120 ) LH $ Rear axle (150 ) RH $1, Rear axle (150 ) LH $1, Hub only (with bearing & seal) $ FRONT STEERING (Trunions & Axles assembled w/hub) Front Draw Pole $ Bushing (inside tie rod) $8.25 Bushing (outside tie rod) $8.25 Pin (inside tie rod) $43.84 Nut (for 65440) $1.25 Pin (outside tie rod) $45.10 Nut (for 65438) $1.91 Bushing (main pivot) $15.38 Pin (main pivot) $53.90 Bushing (drawpole) $15.38 Pin (drawpole) $56.65 Nut(for 65441) $3.90 Bushing (trunion / axle) $21.12 Pin (trunion / axle) $78.10 Nut (for 65439) $3.90 AUGER COMPONENTS Rear clamp assy. (8 ) $ Rear clamp assy. (10 ) $ Seal kit hyd. motor $ Control valve (4 way) $ Selector valve (2 way) $ Wood bearing (with flange) $21.94 Poly flighting sections (8 ) $15.40 Poly flighting sections (10 ) $22.00 Complete auger assy. (without arms)(8 ) $6, Complete auger assy. (without arms)(10 ) $7, Swing arm assy. and mount $ Motor (hyd.) $1, Phone