Part's Manual Rev 1

Size: px

Start display at page:

Download "Part's Manual Rev 1"

Morgan Clarke
5 years ago
Views:

1 MC7ES Part's Manual Gasoline containing up to 0% ethanol (E0) is acceptable for use in this machine. The use of any gasoline exceeding 0% ethanol (E0) will void the product warranty Rev

2 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) AUGER HOUSING / IMPELLER ASSEMBLY (EXPLODED) F NOTE: All component dimensions given in U.S. inches. inch =. mm 0

3 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) AUGER HOUSING / IMPELLER ASSEMBLY -0 IMPELLER 7- GEARBOX ASSEMBLY -0 BEARING 7- IMPELLER PULLEY - DISCHARGE BASE 0- CORNER BRACKET 7 - CLEAN OUT TOOL 0-00 TOOL CLIP NUT / SCREW /-0 X. 7- NUT /- - SCREW /- X. 7- IMPELLER HUB 7- IMPELLER SLEEVE - FLANGE NUT /- 0- CARRIAGE BOLT 7 - SCREW - X PLUG 7-0 GEARBOX COVER RH 0 7- GASKET SEAL BEARING 7-7 THRUST WASHER WORM GEAR AUGER SHAFT - SQUARE BEARING 7 - THRUST WASHER 7-7 IMPELLER SHAFT 0-0 ROLL PIN 7 - THRUST WASHER 7 - THRUST BEARING BEARING O-RING SCREW /- X GEARBOX COVER LH SHEAR BOLT NOTE: All component dimensions given in U.S. inches. inch =. mm

4 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) AUGER HOUSING / IMPELLER ASSEMBLY -7 AUGER HOUSING SCRAPER BAR CARRIAGE BOLT / X. -77 NUT / (x) (x) A - AUGER 7 LH - AUGER 7 RH A NOTE: All component dimensions given in U.S. inches. inch =. mm

5 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) AUGER HOUSING / IMPELLER ASSEMBLY 0-7 AUGER BEARING - BEARING PLUG 7 - SCREW / X B C 0- SKID PLATE LH 0- SKID PLATE RH CARRIAGE BOLT / X.7 7- NUT / NOTE: All component dimensions given in U.S. inches. inch =. mm

6 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) CONTROL PANEL / CHUTE CHUTE WELDMENT - DEFLECTOR WELDMENT 0- DEFLECTOR SEAL - STRAP 0- KNOB BLACK - POP RIVET 7-00 SHOULDER BOLT / 0 X CARRIAGE BOLT / X. 7-0 NUT / WASHER 7 - PLASTIC WASHER 0- CHUTE SNOW SHIELD 7- SHIELD RETAINER STRAP E NOTE: All component dimensions given in U.S. inches. inch =. mm

7 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) CONTROL PANEL / CHUTE * *7 * -7 LEVER/CABLE ROTATOR ASSEMBLY SCREW 0- X. * 0-7 ROTATOR HEAD * 0 - ROTATOR PIVOT BRACKET * 0-7 PULLEY PIVOT * -7 CABLE ASSEMBLY ADJUSTABLE *7-0 CABLE ASSEMBLY HEAT SHIELD * B * NOTES:. ITEMS INDICATED WITH AN * ARE LISTED AS REFERENCE FOR SERVICE S ONLY. NOTE: All component dimensions given in U.S. inches. inch =. mm

8 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) HANDLES PLOW HANDLE LH 0-70 PLOW HANDLE RH - PANEL BRACKET LH - PANEL BRACKET RH - HANDLE GRIP SCREW / X SCREW / X NUT / - WASHER WASHER B - LOWER HANDLE -7 PIVOT SUPPORT WELDMENT SCREW / X SCREW / X WASHER HARDENED C NOTE: All component dimensions given in U.S. inches. inch =. mm

9 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) HANDLES J - CONTROL PANEL - CONTROL LEVER LH -0 CONTROL LEVER RH - TRACTION ROD ARM 0- IMPELLER ROD ARM -77 INTERLOCK BAIL 7 - SPACER -7 RETAINER SCREW /-0 X. 0-0 KNOB BLACK - KNOB RED 7 - HANDLE KNOB - WASHER / 7 0- CARRIAGE BOLT /- X. NOTE: All component dimensions given in U.S. inches. inch =. mm 7

10 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) HANDLES IMPELLER ROD TRACTION ROD 0- SHIFTER ROD TOP 77- SHIFTER ROD BOTTOM 0-7 SPRING SLEEVE 7 - IMPELLER SPRING 7 0- TRACTION SPRING CARRIAGE BOLT /- X. -77 NUT /- 0-7 RETAINER E NOTE: All component dimensions given in U.S. inches. inch =. mm

11 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) HANDLES 7 - CONSOLE PANEL 7 - HEADLIGHT BEZEL 0-7 FLOOD HEADLIGHT -7 SCREW 0 X. 7 - SCREW 0 X. 0- WIRE HARNESS 7 7- BULB D - INTERLOCK SPRING - INTERLOCK CAM - TORSION SPRING -7 RETAINER SCREW / 0 X. - INTERLOCK STOP D NOTE: All component dimensions given in U.S. inches. inch =. mm

12 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) DRIVE ITEM EXPLODED C NOTE: All component dimensions given in U.S. inches. inch =. mm 0

13 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) DRIVE -7 SPEED SELECTOR ASSEMBLY SCREW 0- X. - END PLATE SCREW /- X WASHER 0 - CONTROL ARM 7-0 CLEVIS PIN -0 SHIFTER PLATE 0 - SHOULDER BOLT 0 - SHIFTER BRACKET 7-0 NUT /-0 - CLUTCH PLATE - CLUTCH BRACKET 7-0 SHIFTER LINK RETAINER 7- CONTROL SHAFT CLUTCH ROD -7 RETAINER 0 7- SHIFTER YOKE PIVOT ROD RETAINER 0-7 RETURN SPRING 7 - NUT /- 0 - BEARING NUT /- -0 RUBBER WHEEL PLATE RUBBER RING 7 - BEARING 7 - WHEEL HUB SCREW / RETAINER RING 0-7 SPROCKET SHAFT 0 - CHAIN 7-0 SPROCKET WELDMENT - SHIFTER BRACKET 0- SPRING PLATE PIVOT ROD - E-RING.7-7 SHOULDER SCREW BOTTOM PAN - SPRING BRACKET 0 - DRIVE PLATE ASSEMBLY -7 IDLER SPRING 7 - IDLER SPRING 0-0 PULLEY SHAFT 0-0 DRIVE PLATE 7 7- BEARING 0 - PULLEY HALF SCREW 0- X SPACER BEARING - SWING PLATE 0-0 NUT /- -7 SCREW /- X BOLT /- X. NOTE: All component dimensions given in U.S. inches. inch =. mm

14 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) DRIVE 7 b b a C - (assy of a,b) AXLE ASSEMBLY a 7 - AXLE SHAFT b -0 ROLL PIN / 0 - SPROCKET 7-7 THRUST WASHER 7-0 BEARING BOLT / X PIN 7 - SQUARE 7- RETAINER PIN NOTE: All component dimensions given in U.S. inches. inch =. mm

15 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) CHASSIS / ENGINE / PULLEYS A COMPLETE LCT ENGINE PWHK07-EA -7 FRAME 0-0 BOLT /- -7 SCREW /- X ENGINE MOUNTING PLATE A - COVER ASSEMBLY 0..0-C NOTE: All component dimensions given in U.S. inches. inch =. mm

16 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) CHASSIS / ENGINE / PULLEYS B - IMPELLER BELT 7-0 TRACTION BELT -7 IDLER ARM BRACKET 0- IDLER PULLEY -70 IDLER BRACKET - NUT / SCREW /- X.0-7 SHOULDER BOLT /- X NUT /- LOCK SCREW /- X. 77- TRACTION IDLER BRACKET 0- TRACTION PULLEY 0 - WASHER NUT / SCREW /- X. 0- SCREW /- X WASHER - PULLEY ENG IMPELLER - PULLEY ENG TRACTION SCREW /- X LOCKWASHER / - BELT GUIDE LOCKWASHER / 7 - IDLER BUSHING -0 WASHER SCREW /- X SCREW /- X.70 NOTE: All component dimensions given in U.S. inches. inch =. mm

17 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) WHEELS 7- WHEEL ASSEMBLY LH 7- WHEEL ASSEMBLY RH A NOTE: All component dimensions given in U.S. inches. inch =. mm

18 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) BAG OF S 7 - POWER CORD -7 RETAINER PIN - WRENCH LOCKNUT / - WASHER / 0-0 SHEAR BOLT / 0 X / LOCKNUT / B 0- SAFETY IGNITION KIT B 0..0-A 0- SHIFTER ROD TOP 77- SHIFTER ROD BOTTOM CARRIAGE BOLT /- X.7-77 NUT /- NOTE: All component dimensions given in U.S. inches. inch =. mm

19 REPAIR S SNOW THROWER - - MODEL NUMBER MC7ES (000) DECALS 0-7 DECAL, DANGER 0- DECAL, DANGER, DEFLECTOR 0- DECAL, DANGER 0- DECAL, INSTRUCTION - DECAL, CON RT SPD/LEV/PWST 7- DECAL, CON LT WD/DEF OWNER S MANUAL, ENGLISH OWNER S MANUAL, FRENCH NOTE: All component dimensions given in U.S. inches. inch =. mm 7

20 SERVICE NOTES

21 SERVICE NOTES

22 LIMITED WARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materials and work man ship. For a period of two () years from date of purchase by the original consumer purchaser, we will repair or replace, at our option, without charge for parts or labor incurred in replacing parts, any part which we find to be defective due to materials or workmanship. This Warranty is subject to the following limitations and exclusions.. This warranty does not apply to the engine, transaxle/transmission components, battery (except as noted below) or components parts thereof. Please refer to the applicable manufacturer's warranty on these items.. Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the pur chaser. Transportation charges for any parts submitted for replacement under this warranty must be paid by the purchaser unless such return is requested by the manufacturer.. Battery Warranty: On products equipped with a Battery, we will replace, without charge to you, any battery which we find to be defective in manufacture, during the first ninety (0) days of ownership. After ninety (0) days, we will exchange the Battery, charging you / of the price of a new Battery for each full month from the date of the original sale. Battery must be maintained in accordance with the instructions furnished.. The Warranty period for any products used for rental or commercial purposes is limited to 0 days from the date of original purchase.. This Warranty applies only to products which have been properly assembled, adjusted, operated, and main tained in accor dance with the instructions furnished. This Warranty does not apply to any product which has been subjected to alteration, misuse, abuse, improper assembly or installation, delivery damage, or to normal wear of the product.. Exclusions: Excluded from this Warranty are belts, blades, blade adapters, normal wear, normal adjustments, stan dard hardware and normal maintenance. 7. In the event you have a claim under this Warranty, you must return the product to an authorized service dealer. Should you have any unanswered questions concerning this Warranty, please contact: HOP Outdoor Products Customer Service Dept. Harris Corners Parkway Charlotte, NC USA In Canada contact: HOP Terry Fox Way Mississauga, Ontario LV E giving the model number, serial number and date of purchase of your product and the name and address of the authorized dealer from whom it was purchased. THIS WARRANTY DOES NOT APPLY TO INCIDENTAL OR CONSEQUENTIAL DAMAGES AND ANY IMPLIED WAR RAN- TIES ARE LIMITED TO THE SAME TIME PERIODS STATED HEREIN FOR OUR EXPRESSED WARRANTIES. Some areas do not allow the limitation of consequential damages or limitations of how long an implied Warranty may last, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from locale to locale. This is a limited Warranty within the meaning of that term as defined in the Magnuson-Moss Act of TH Printed in the U.S.A.

PP291E27 ILLUSTRATED PARTS LIST MODEL NUMBER: SNOW THROWER

PP291E27 ILLUSTRATED PARTS LIST MODEL NUMBER: SNOW THROWER IMPORTANT MANUAL Do Not Throw Away ILLUSTRATED S LIST MODEL NUMBER: PPE7 SNOW THROWER WARNING: Read the Owner's Manual and fol low all Warnings and Safety In struc tions. Fail ure to do so can result in