CHANDLER LOW PROFILE

Transcription

1

2

3 CHANDLER LOW PROFILE ORCHARD AND GROVE PULL-TYPE FERTILIZER AND LIME SPREADER (Unit Shown W/PTO Drive Spinners) Hopper Specifications 3-Ton Capacity (Fertilizer) 5-Ton Capacity (Lime) Available In: 304 Stainless Steel Hopper (shown) 409 Stainless Steel Also available with multiple options as listed on back of brochure. Spreader Dimensions Overall length 197 (16 5 ) Overall width 80.5 (6 8 1 /2 ) Overall height 64 (5 4 ) Tire Size 16.5L X 16.1 (Above dimensions will vary with size of tire ) The Chandler Low Profile Orchard and Grove Pull-Type Spreader is durable, heavy-duty and well designed for long-lasting, trouble-free service. The low profile design of this spreader allows for ease of travel between rows without damage to trees. The banding attachment around spinners allows fertilizer to be properly placed around trees. Remove Banding Attachment and spreader can be used for standard application of fertilizer and lime. All Chandler Spreaders have been quality checked and tested to provide the best possible spread pattern for your requirements. QUALITY TENDERS AND SPREADERS

4 Hopper Construction: 3-Ton (93 Cubic Feet Water Level) Hopper Length: 10 feet (120 ) Hopper Width: 5 feet (60 ) Hopper Depth: 38 inches HOPPER SPECS HOPPER CONSTRUCTION Rails: 3/ Stainless Steel Plate Floor: 10 ga. 304 Stainless Steel Sides: 12 ga. 304 Stainless Steel Front End: 12 ga. 304 Stainless Steel Rear End: 10 ga. 304 Stainless Steel Axle: Tires and Wheels: Tongue and Hitch: Jack: Crop Clearance: Conveyor Type: Conveyor Drive: Conveyor Rollers: Metering Gate: Material Divider: Spinner Design: Spinner Drive: FRAME AND SUSPENSION Single axle, rigid mounted s/12,000# (per pair) spindles and hubs with 8 bolt on 8 circle 19L x ply Good Year Tires mounted on 16C x 16.1 Duty Wheels Tongue channels manufactured of 8 x11.5# structural channel with heavy duty adjustable pin type hitch 7,000# Drop tube-side wind screw jack 14.5 Axle Clearance CONVEYOR SPECS 16 -wide 1 x 1 mesh type heavy-duty type 304 stainless steel conveyor chain or optional dual 8 -wide 1 x 1 mesh type Conveyor is driven by press wheel, engaged by hydraulic cylinder. Front and rear rollers manufactured from ASTM-36 plate steel Double Rack and Pinion operated metering gate, gate slides, and gate turn pipes manufactured from type 304 stainless steel. Specially engineered Screw Type adjustable material divider for proper material placement on spinners to ensure uniform spread pattern at all application rates (screw rod and material divider manufactured of type 304 stainless steel). SPINNER SPECS Twin Dished Type spinners, 24 diameter with 6 blades per spinner. PTO driven spinners, with optional hydraulic plug to tractor or Self Contained Hydraulic System. QUALITY TENDERS AND SPREADERS

5 CHANDLER MODEL 10PTT-FT TANDEM AXLE PULL-TYPE FERTILIZER/LIME SPREADER Spreader Dimensions Overall length 217 (18 1 ) Overall width 96 (8 0 ) Overall height 81 (6 9 ) Tire Size 14Lx16.1 (Above dimensions will vary with size of tire) Full ground wheel drive available Hopper Specifications Length 120 (10 0 ) Width 96 (8 0 ) Height 51.5 (4 3 ) Net depth (3 9 ) Capacity 185 cu. ft. (6 ton capacity) Also available with multiple options as listed on back of brochure. The Chandler Pull-Type Fertilizer Spreader is durable, heavy-duty and well designed for long-lasting, troublefree service. The design and construction quality of this spreader sets the standard in the agri-business industry. This unit is offered in corrosive-resistant 304 stainless steel. This pull-type spreader has been quality checked and tested to provide the best possible spread pattern for your requirements. QUALITY TENDERS AND SPREADERS

6 HOPPER SPECS Hopper Construction: (A) 304 Stainless Steel (B) 409 Stainless Steel (C) Carbon Steel with Stainless Steel at critical corrosion points Angle of Sides: Standard 45, Optional is used in heavy lime application Axle: Tires and Wheels: Optional: Conveyor Type: Conveyor Drive: Conveyor Rates: Conveyor Rollers: Metering Gate: Material Divider: Spinner Design: Spinner Drive: FRAME & SUSPENSION Tandem Axle, Henschen suspension spindles & hubs with 6 bolts. 14L x ply tires mounted on W11C x 16.1 heavy-duty wheels. Tongue channels mfg. of 7 x 9.8# structural channel with heavy-duty adjustable pin type hitch. CONVEYOR SPECS 1 x 1 mesh type heavy-duty type 304 stainless steel conveyor chain 16 wide. (Also available in 18, 20 & 24 ) (Bar style chains and neoprene belts of various widths also available on special order.) Conveyor is driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor. Utilize two sets of sprockets low to medium and medium to high application rate from 75 lbs. to 4,500 lbs. per acre. Front and rear rollers manufactured from ASTM-35 plate steel (most competitors use cast iron). Double Rack and Pinion operated metering gate, gate slides, and gate turn pipe manufactured from type 304 stainless steel. Specially engineered Screw Type adjustable material divider for proper material placement on spinners to insure uniform spread pattern at all application rates. (Screw rod and material divider manufactured of type 304 stainless steel. SPINNER SPECS Twin Dished Type spinners, 24 diameter with 6 blades per spinner, specially designed for extremely accurate broadcasting of materials. PTO Drive with gear cases, hydraulic drive spinners with hook-up to tractor or self-contained hydraulic system driven from tractor PTO. QUALITY TENDERS AND SPREADERS

7 CHANDLER MODEL 20 PTT-FT TANDEM AXLE PULL-TYPE LIME AND FERTILIZER SPREADER Spreader Dimensions Overall length 217 (18 1 ) Overall width 97 (8 1 ) Overall height 92 (7 8 ) Tire Size 16.5L X 16.1 (Above dimensions will vary with size of tire ) Hopper Specifications Length 120 (10 0 ) Width 96 (8 0 ) Height 64 (5 4 ) Net depth 57 (4 9 ) Capacity 246 cu. ft. (8 ton capacity) Also available with multiple options as listed on back of brochure. The Chandler Pull-Type Fertilizer Spreader is durable, heavy-duty and well designed for long-lasting, troublefree service. The design and construction quality of this spreader sets the standard in the agri-business industry. This unit is offered in corrosive-resistant 304 stainless steel. This pull-type spreader has been quality checked and tested to provide the best possible spread pattern for your requirements. QUALITY TENDERS AND SPREADERS

8 HOPPER SPECS Hopper Construction: (A) 304 Stainless Steel (B) 409 Stainless Steel (C) Carbon Steel with Stainless Steel at critical corrosion points Angle of Sides: Standard 45, Optional is used in heavy lime application SUSPENSION Axle: Tandem Axle Henschen Suspension 20,000# per pair Axle Clearance: 21 Tires and Wheels: 16.5L x 16.1 Tires on W14C x 16.1 Wheels Optional: 19L Tires on W16C x 16.1 Wheels Conveyor Type: Conveyor Drive: Conveyor Rates: Conveyor Rollers: Metering Gate: Material Divider: Spinner Design: Spinner Drive: CONVEYOR SPECS 1 x 1 mesh type heavy-duty type 304 stainless steel conveyor chain 16 wide. (Also available in 18, 20 & 24 ) (Bar style chains and neoprene belts of various widths also available on special order.) Conveyor is driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor. Utilize two sets of sprockets low to medium and medium to high application rate from 75 lbs. to 4,500 lbs. per acre. Front and rear rollers manufactured from ASTM-35 plate steel (most competitors use cast iron). Double Rack and Pinion operated metering gate, gate slides, and gate turn pipe manufactured from type 304 stainless steel. Specially engineered Screw Type adjustable material divider for proper material placement on spinners to insure uniform spread pattern at all application rates. (Screw rod and material divider manufactured of type 304 stainless steel. SPINNER SPECS Twin Dished Type spinners, 24 diameter with 6 blades per spinner specially designed for extremely accurate broadcasting of materials. (A) PTO Shaft and Belts (not recommended for heavy lime application) (B) Hydraulic Drive with hookup to tractor (C) Self-contained hydraulic driven from tractor PTO QUALITY TENDERS AND SPREADERS

9 CHANDLER MODEL 9-PT-FT FERTILIZER/LIME SPREADER The Chandler Fertilizer and Lime spreader is a durable, heavy duty and well designed unit to give long lasting, trouble-free service. The design and construction go far beyond present standards and are striving for a lime or fertilizer spreader to meet the quality our customers demand. The superior design and construction, its low initial cost, its efficiency and ease of operation and economical maintenance make it the preferred spreader throughout the agri-business industry. The Chandler FT unit is available in (3) models: (1) FT-CS Standard duty carbon steel with stainless steel at critical corrosion points. (2) FT-409 Stainless steel construction (3) FT-304 Stainless steel construction SPREADER AND BULK FEED BODY DIVISION HANDLER EQUIPMENT CO. Gainesville, Georgia (770)

10 Hopper Capacity: Hopper Net Length: Hopper Width: Hopper Net Depth: Hopper Overall Height Angle of Repose: HOPPER SPECS 4 to 5 Ton Capacity (according to cu. ft. weight of material). 9 ft. (108 in.) 8 ft. (96 in.) 43 in (83 in.) Also Available in low profile design making unit have 77 overall height. Side 45 ; End 22 Axle: Tires and Wheels: Tongue and Hitch: Jack: Crop Clearance: FRAME & SUSPENSION Single axle, rigid mounted s/12,000 #(per pair) spindles & hubs with 8 bolt on 8 circle (see optional equipment option A.) Adjustable Row Track available. 19L x ply Good Year tires mounted on 16 cl 6.1 heavy duty wheels x ply for row crop model. Tongue channels mfd. of 7 x 9.8 # structural channel with heavy duty adjustable pin type hitch. (see optional equipment option E.) Note: Many competitors use formed steel channels or a lighter weight 6 channel for tongue channels # drop tube-side wind screw jack. 24, 30, 40 Spinner Clearance CONVEYOR SPECS Conveyor Type: 1 x 1 mesh type, heavy duty type 304 stainless steel conveyor chain 16 wide. (Also available in other widths.) (Bar style chains and neoprene belts of various widths also available on special order.) Conveyor Drive: Conveyor is driven by press wheel, engaged and disengaged with handle located at front of spreader unit. (Optional hydraulic cylinder available to engage and disengage press wheel from tractor.) Metering Gate: Double rack and pinion operated. Metering gate, gate slides and gate turn pipe mfd. from type 304 stainless steel. Note: Many competitors utilize a screw jack to raise and lower metering gate. Conveyor Rates: Utilize two sets of sprockets low to medium and medium to high application rate from 75 lbs. to 4000 lbs. per acre. Unit, unlike many competitors models, utilizes same roller chain for both application rates and can be changed simply by loosening nut on idler assembly and moving chain. Material Divider: Specifically engineered Screw Type adjustable material divider for proper material placement on spinners to insure uniform spread pattern at all application rates. (Screw rod and material divider mfd. of type 304 stainless steel.) Conveyor Rollers: Front and rear rollers mfd. from ASTM-36 plate steel. (Most competitors use cast iron.) Front and rear rollers have diameter shafts with flange type bearings. Spinner Design: Spinner Drive: SPINNER SPECS Twin Dished Type spinners, 24 diameter with 6 blades per spinner specially designed for extremely accurate broadcasting of materials. Press wheel driven with dual B section V-Belts. Power transmitted thru extremely heavy duty gear case w/1 1 4 diameter shafts and tapered roller brgs. Utilizes same press wheel that drives conveyor. Optional PTO or Hydraulic Drive. Manufactured by: Chandler Equipment Company P.O. Box 2533 Gainesville, GA Phone (770) Toll Free

11 CHANDLER MODEL 9-PT-FT GROUND WHEEL DRIVE PULL TYPE FERTILIZER/LIME SPREADER The Chandler Fertilizer and Lime Spreader is a durable, heavy duty and well designed unit to give long lasting, trouble-free service. The design and construction goes far beyond present standards and is striving for a lime or fertilizer spreader to meet the quality our customers demand. The superior design and construction, its low initial cost, its efficiency and ease of operation and economical maintenance make it the preferred spreader throughout the agribusiness industry. The Chandler FT unit is available in (3) models: (1) FT-CS Standard duty carbon steel with stainless steel at critical corrosion points. (2) FT-CH Heavy duty carbon steel with stainless steel at critical corrosion points. (3) FT-SS Stainless steel construction. SPREADER AND BULK FEED BODY DIVISION

12 HOPPER SPECS Hopper Capacity: 4 to 5 Ton Capacity (according to cu. ft. weight of material). Hopper Net Length: 9 ft. (108 in.) Hopper Width: 8 ft. (96 in.) Hopper Net Depth: 43 in. Hopper Overall Height: 6 11 (83 in.) Also available in low profile design making unit have 77 overall height. (w/19.1x16.1 tires): Angle of Repose: Side 45º; End 22º Axle: Tires and Wheels: Tongue and Hitch: Jack: FRAME & SUSPENSION Single axle, rigid mounted s/12,000 # (per pair) spindles & hubs with 8 bolt circle (See optional equipment option A.) 19L x ply Good Year tires mounted on 16 cl 6.1 heavy duty wheels. (See optional equipment options B, C, & D.) Tongue channels mfd. of 7 x 9.8 # structural channel with heavy duty adjustable pin type hitch. (See optional equipment option E.) Note: Many competitors use formed steel channels or a lighter weight 6 channel for tongue channels # drop tube-side wind screw jack. Note: Many competitors use smaller jacks. CONVEYOR SPECS Conveyor Type: 1 x 1 mesh type, heavy duty type 304 stainless steel conveyor chain 16 wide. (Also available in other widths.) (Bar style chains and neoprene belts of various widths also available on special order.) Conveyor Drive: Conveyor is driven by press wheel, engaged and disengaged with handle located at front of spreader unit. (Optional hydraulic cylinder available to engage and disengage press wheel from tractor.) (See optional equipment F.) Metering Gate: Double rack and pinion operated. Metering gate, gate slides and gate turn pipe mfd. from type 304 stainless steel. Note: Many competitors utilize a screw jack to raise and lower metering gate. We also offer this type gate and mechanism as optional equipment with a reduction in price. (See optional equipment option G.) Conveyor Rates: Utilize two sets of sprockets low to medium and medium to high application rate 75 lbs. to 4000 lbs. per acre. Unit, unlike many competitors models, utilizes same roller chain for both application rates and can be changed simply by loosening wing nut on idler assembly and moving chain (no tool required.) Material Divider: Specially engineered Screw Type adjustable material divider for proper material placement on spinners to insure uniform spread pattern at all application rates. (Screw rod and material divider mfd. of type 304 stainless steel.) Conveyor Rollers: Front and rear rollers mfd. from ASTM-36 plate steel. (Most competitors use cast iron.) Front and rear rollers have 1 1 /2 diameter shafts with 1 1 /2 flange type bearings. (Many competitors use smaller diameter shafts, thus smaller bearings.) SPINNER SPECS Spinner Design: Twin Dished Type spinners, 24 diameter with 6 blades per spinner specially designed for extreme accurate broadcasting of materials. Spinner Drive: Press wheel driven with dual B section V-Belts. Power transmitted thru extremely heavy duty gear case with 1 1 /4 diameter shafts and tapered roller brgs. Utilizes same press wheel that drives conveyor. Manufactured by: Chandler Equipment Company P.O. Box 2533 Gainesville, GA (770)

13 NEW CHANDLER PULL-TYPE FERTILIZER SPREADER MODEL PT 10FSS Spreader Dimensions Overall length 214 (17 10 ) Overall width 84 (7 0 ) Overall height 85 (7 1 ) Mounted on 12.5L Tires Full ground wheel drive available Hopper Specifications Length 120 (10 0 ) Width 80 (6 8 ) Height 55 (4 7 ) Net depth 45 (3 9 ) Capacity 156 cu. ft. (5 ton capacity) Also available-6 ton THE CHANDLER PTO MODEL PULL-TYPE FERTILIZER SPREADER The Chandler Pull-Type Fertilizer Spreader is durable, heavy-duty and well designed for long-lasting, troublefree service. The design and construction quality of this spreader sets the standard in the agri-business industry. This unit is offered in corrosive-resistant 304 stainless steel. This pull-type spreader has been quality checked and tested to provide the best possible spread pattern for your requirements. QUALITY TENDERS AND SPREADERS web: applied.net/chandler

14 Frame & Suspension Axle: Tandem axle, 6500# Henschen suspension with 6 bolt spindles & hubs Frame: Heavy duty 6 Channel, with heavy duty adjustable hitch and 7000# jack Conveyor Specs Conveyor Type: 1 x 1 heavy-duty type 304 stainless steel conveyor chain 8 wide Conveyor drive: Conveyor is driven by press wheel with laminated tire for long life (Also available with Hydraulic cylinder to engage ground wheel) Metering Gate: Double rack and pinion gate, metering gate, gate slides and gate pipe mfg. from type 304 stainless steel Conveyor rates: Fertilizer rates from 80# to 600# per acre Material Divider: Specially engineered Screw Type adjustable material divider for proper material placement on spinners to insure uniform spread pattern at all application rates (Screw rod and material divider made of type 304 stainless steel) Conveyor Rollers: Front and rear rollers mfg. from ASTM-36 plate steel (Most competitors use cast iron) Spinner Specs Spinner Design: Twin Dished Type spinners, 24 diameter with 6 blades per spinner, specially designed for extremely accurate broadcasting of materials. Spinner Drive: PTO Drive with gear cases underneath the spinners or overhead belt drive spinners QUALITY TENDERS AND SPREADERS web: applied.net/chandler

15 CHANDLER PULL-TYPE FERTILIZER SPREADER MODEL PT 12FSS Hopper Specifications Length 120 (10 0 ) Width 80 (6 8 ) Height 60 (5 0 ) Net depth 53 (4 5 ) Capacity 187 cu. ft. (6 ton capacity) Also available-5 ton Spreader Dimensions Overall length 214 (17 10 ) Overall width 84 (7 0 ) Overall height 91 (7 7 ) (Standard) Height varies with tire size Mounted on 14L Tires (Standard) Full ground wheel drive available THE CHANDLER PTO MODEL PULL-TYPE FERTILIZER SPREADER The Chandler Pull-Type Fertilizer Spreader is durable, heavy-duty and well designed for long-lasting, troublefree service. The design and construction quality of this spreader sets the standard in the agri-business industry. This unit is offered in corrosive-resistant 304 stainless steel. This pull-type spreader has been quality checked and tested to provide the best possible spread pattern for your requirements. QUALITY TENDERS AND SPREADERS web: applied.net/chandler

16 Frame & Suspension Axle: Tandem axle, 6500# Henschen suspension with 6 bolt spindles & hubs Frame: Heavy duty 6 Channel, with heavy duty adjustable hitch and 7000# jack Conveyor Specs Conveyor Type: 1 x 1 heavy-duty type 304 stainless steel conveyor chain 8 wide Conveyor drive: Conveyor is driven by press wheel with laminated tire for long life (Also available with Hydraulic cylinder to engage ground wheel) Metering Gate: Double rack and pinion gate, metering gate, gate slides and gate pipe mfg. from type 304 stainless steel Conveyor rates: Fertilizer rates from 80# to 600# per acre Material Divider: Specially engineered Screw Type adjustable material divider for proper material placement on spinners to insure uniform spread pattern at all application rates (Screw rod and material divider made of type 304 stainless steel) Conveyor Rollers: Front and rear rollers mfg. from ASTM-36 plate steel (Most competitors use cast iron) Spinner Specs Spinner Design: Twin Dished Type spinners, 24 diameter with 6 blades per spinner, specially designed for extremely accurate broadcasting of materials. Spinner Drive: PTO Drive with gear cases underneath the spinners or overhead belt drive spinners. 8 CHAIN QUALITY TENDERS AND SPREADERS web: applied.net/chandler

17 Building the most accurate and heaviest built spreader since CHANDLER TRUCK-MOUNTED FERTILIZER AND LIME SPREADER (with Spread-Master Technology) Application rates from 60 pounds per acre on fertilizer to over six tons per acre on lime (depending on chain width). All Chandler Spreaders can be equipped with variable rate controls from Mid-West Technologies. (Mid-Tech Legacy 6000) Gainesville, Georgia Toll Free Gainesville, Georgia Toll Free

18 Chandler FT EXW Hopper Available in 10, 11, 12, and 13 Lengths Catwalks 130 Wide 10 UNIT 11 UNIT 12 UNIT 13 UNIT Hopper Capacity 221 Cu. Ft. 244 Cu. Ft. 266 Cu. Ft. 288 Cu. Ft. (Struck Level) Hopper Construction: Available in three types of material: 1. Mild Steel with 304 Stainless Steel at critical corrosion points Stainless Steel (corrosion resistant stainless but has to be painted) Stainless Steel (top of the line in spreader manufacturing) Available in 45, 52 or 60 Degree Slope on Sides (Drawings shown with 45 degree slope sides, width will vary depending on degree of slope) Payload (struck level) 14,365 Lbs. 15,860 Lbs. 17,290 Lbs. 18,720 Lbs. 65# Material) Hopper Capacity 251 Cu. Ft. 276 Cu. Ft. 301 Cu. Ft. 326 Cu. Ft. (Heaped and Tarped) Payload (Heaped) 16,315 Lbs. 17,940 Lbs. 19,565 Lbs. 21,190 Lbs. 65# Material) Conveyor Specs: Available in three types: 1. 1 x 1 Mesh Type, Heavy Duty Type 304 Stainless Steel Available in 16, 18, 20, and 24 Widths. 2. Bar Type Chain 3. Belt Over Bar type Chain Chandler FT Hopper Chandler FT LH Hopper Available in 11, 12, 13, 14 and 15 Lengths Catwalks 102 Wide 11 UNIT 12 UNIT 13 UNIT 14 UNIT 15 UNIT Hopper Capacity 185 Cu. Ft. 202 Cu. Ft. 219 Cu. Ft. 236 Cu. Ft. 254 Cu. Ft. (Struck Level) Payload (struck level) 12,000 Lbs. 13,130 Lbs. 14,235 Lbs. 15,340 Lbs. 16,510 Lbs. (@ 65# Material) Hopper Capacity 220 Cu. Ft. 241 Cu. Ft. 261 Cu. Ft. 282 Cu. Ft. 303 Cu. Ft. (Heaped and Tarped) Payload (Heaped) 14,300 Lbs. 15,665 Lbs. 16,965 Lbs. 18,330 Lbs. 19,700 Lbs. (@ 65# Material) Available in 11, 12, 13, 14 and 15 Lengths Catwalks 102 Wide 11 UNIT 12 UNIT 13 UNIT 14 UNIT 15 UNIT Hopper Capacity 233 Cu. Ft. 255 Cu. Ft. 298 Cu. Ft. 276 Cu. Ft. 320 Cu. Ft. (Struck Level) Spinner Specifications: 1. Twin Dish Type Spinners, 24 diameter with 6 blades per spinner especially engineered for extremely accurate spread patterns. Mild Steel Construction. Also available in 304 Stainless Steel. 2. High Pressure spinner motors mounted over-head to keep motors out of fertilizer and other contaminants for longer life. 3. Material Divider specially engineered Screw Type adjustable material divider for proper material placement on spinners to insure uniform spread patterns at all application rate and spread widths from Lime, Fertilizer with standard spinner system. 4. Optional: Spread-Master Technology four-blade configuration spinners and a specially-designed flow divider for wide swath applications. (60 Lime 80 Fertilizer) Chandler Spreader with Standard Spinners Spread Patterns on Fertilizer from with Unmatched Accuracy. Payload (struck level) 15,145 Lbs. 16,575 Lbs. 17,940 Lbs. 19,370 bs. 20,800 Lbs. (@ 65# Material) Hopper Capacity 269 Cu. Ft. 295 Cu. Ft. 319 Cu. Ft. 346 Cu. Ft. 370 Cu. Ft. (Heaped and Tarped) Payload (Heaped) 17,485 Lbs. 19,175 Lbs. 20,735 Lbs. 22,490 Lbs. 24,050 Lbs. (@ 65# Material) All Products and Specifications subject to change without notice. Drawing shown with 45 degree slope sides and 16 mesh type chain. Chandler Spreader with Spreader-Master Technology Spread Patterns on Fertilizer up to 90, Lime up to 60.

19 CHANDLER FTLH EXW FERTILIZER AND LIME SPREADER Wider Spread Patterns 90 Fertilizer 60 Lime Belt-Over Bar Chain or Mesh Type Chain Dished Type Spinners Designed for Maximum Coverage on Spread Pattern Designed to Fit Almost Any Floater Chassis Tandem Pump System with 50-Gallon Hydraulic Oil Tank New Cleaner Design, Wider Spread Patterns With The Same Dependability The new FTLH-EXW has the same dependability, accuracy and reliability that Chandler Spreaders have been known for over the past thirty-eight years with a new cleaner design and wider spread patterns. Our field proven dished type spinners with a new four-blade system give the Chandler FTHL-EXW an oval pattern that has been the desirable pattern throughout the industry for many years. All Chandler Spreaders are available with Mid-Tech or Raven Control systems. Gainesville, Georgia Toll Free

20 Chandler FTLH EXW Hopper Specifications 11 Unit 12 Unit 13 Unit A Overall Length B Inside Hopper Cab to Center of Axle Spread Patterns: Fertilizer up to 90 Lime up to Unit 12 Unit 13 Unit Hopper Capacity 257 Cu. Ft. 280 Cu. F t. 303 Cu. F t. (Struck Level) Payload (struck level) 16,702 Lbs. 18,220 Lbs. 19,695 Lbs. (@ 65# Material) Hopper Capacity 287 Cu. Ft. 310 Cu. F t. 340 Cu. F t. (Heaped and Tarped) Payload (Heaped) 18,655 Lbs. 20,150 Lbs. 22,110 Lbs. (@ 65# Material) All Products and Specifications subject to change without notice. Drawing shown with 45 degree slope sides and 24 Belt Over Bar Chain. Hopper Construction: Available in three types of material: Mild Steel, 409 Stainless Steel, 304 Stainless Steel Conveyor Specifications: Available in three types: 24 1 x 1 Mesh Type-304 Stainless Steel, Bar Type Chain and Belt Over Bar Type Chain Spinner Specifications: Four blade configuration spinners and a specially designed flow divider for wide swath applications. (60 Lime 90 Fertilizer) High Pressure, Double Bearing spinner motors mounted overhead keeps motors out of fertilizer and other contaminants for longer life. Gainesville, Georgia Toll Free