Mining Excavator R 9100

Transcription

1 Mining Excavator R 9100 Operating Weight with Backhoe Attachent: tonnes / 120 tons Shovel Attachent: tonnes / 124 tons Engine: 565 kw / 757 HP Bucket Capacity: 7.0 ³ / 9.2 yd³ Shovel Capacity: 7.0 ³ / 9.2 yd³

2 R 9100 Operating Weight with Backhoe Attachent: tonnes / 120 tons Shovel Attachent: tonnes / 124 tons Engine: 565 kw / 757 HP Bucket Capacity: 7.0 ³ / 9.2 yd³ Shovel Capacity: 7.0 ³ / 9.2 yd³ Productivity Working Harder and Faster Efficiency Moving More for Less 2 R 9100

3 Reliability Ready to Work When You Need It Custoer Service World-Class Support, Everywhere, Every Day Safety Protecting Your Most Iportant Assets Environent Mining Responsibly R

4 Productivity Working Harder and Faster Efficient and effective by design, the R 9100 sets a new standard in job perforance and functions as the optial tool for loading 50 t up to 100 t off highway trucks. Offering a unique level of versatility the R 9100 opens up new opportunities for a wide range of excavating applications. 4 R 9100

5 Fast and Precise Moveent High Digging and Lifting Capabilities Liebherr Engine V12 The R 9100 is equipped with the long-lasting and proven Liebherr V12 diesel engine specifically designed to withstand extree outside teperatures and high altitudes with low atospheric pressure. Integrating the latest engine anageent syste, the R 9100 is built for extree conditions. Fast Cycle Tie Like all other Liebherr ining excavators, the R 9100 uses a closed-loop swing circuit. The ain hydraulic circuit coprises a cobination of three independent ain valves fed by three working pups, providing unrivaled flexibility of attachent control and force distribution, while allowing full oil flow integration for fast oveent and lowest cycle ties. High Digging Forces Designed for the best echanical force distribution, the production-tailored attachent delivers tough digging and lifting forces. Integrating Liebherr-ade cylinders and a wide range of buckets with ining optiized GET, the R 9100 s attachent ensures the highest forces, easy bucket penetration and high fill factor to perfor even in the ost deanding conditions. Power-Oriented Energy Manageent The R 9100 s attachent is equipped with the pressureless boo-down function to enable fast cylinder retraction without the need for pup energy. Intelligent energy anageent diverts the pup flow during boo lowering, allowing other cylinder otions to operate unipeded. Precise Machine Motions The R 9100 s hydraulic control syste is optiized in order to iprove cobined achine otions. The ergonoically ounted joysticks on the suspended seat arrests allow the operator to precisely position the achine. Liebherr Diesel Engine V12 by Liebherr US / EPA Tier 2 / Tier 4i copliant Fuel consuption optiized version (optional) Autoatic idle control Max. altitude without derating: 3,600 Eco-Mode selector Liebherr Site-Specific Bucket 4 to 5 passes to load a 50 t off highway truck Three types of wear package Maxial bucket fill factor Integrated approach on achine capabilities Light weight bucket for ax. loading capacities (optional) Exclusive Bucket Solution Innovative Liebherr bucket design to axiize bucket fill factor Optiized Liebherr GET and wear package according to custoer application Ensures optial penetration efficiency Single GET haerless locking syste for safe and easy aintenance Fully patented GET syste design for optial penetration / lifetie Four tooth profiles available for various range of applications R

6 Efficiency Moving More for Less The R 9100 follows the Liebherr design philosophy of axiizing a achine s perforance by iproving the efficiency of all individual subsystes. Engineered for easy serviceability, the achine is designed to ensure axiu uptie. The R 9100 s odern cab creates a cofortable working environent, ensuring peak operator perforance at every shift. 6 R 9100

7 Built for Maxiu Profitability Cofortable Cab for Efficient Work Hydraulic Syste Efficiency Liebherr advanced hydraulic technology contributes to the R 9100 s energy optiization. The high-pressure hydraulic syste and the optiized pipe and hose layout axiize usable power transission. The hydraulic pups are anaged to provide optial pressure copensation and oil flow anageent. The hydraulic syste is independently regulated over the engine circuit for the best operational efficiency. Independent Cooling Syste Oil and water cooling fans are independent and electronically anaged. The on-deand cooling control enables to axiize available power for the working process. This technology contributes to aintain sustainable teperature of all the hydraulic coponents extending their life. Closed Loop Swing Circuit The Liebherr Mining excavators are all equipped with a closed loop swing circuit. The kineatic energy can be saved when the swing otion is used during deceleration, to drive the ain and auxiliary pups, reducing fuel consuption and allowing faster boo lift otion. Superior Operator Cofort The odern large cab provides ideal working conditions and optial operator s cofort. Mounted on silent blocks, the R 9100 s cab design reduces vibrations and liits noise pollution to provide a quiet working environent. Extended Coponents Lifetie The R 9100's hydraulic oil filtration systes reove fluid containants to offer the highest rate of hydraulic coponents durability. To aintain oil quality, all return hydraulic oil flow goes through a fine filtration syste (15 / 5 μ) and oil tank is sized to considerably extend the tie between service intervals. Advanced Machine Monitoring 10.5" LCD color screen Inforation interface to operator On-board diagnostics to service staff Real text inforation Long ter data storage for aintenance First-Class Service Arrangeents Service friendly design allows easy and fast aintenance for axiu uptie: Service fro one-side Large catwalk and walkway Refillable grease tanks instead of drus to be changed Centralized lubrication syste Enhanced single-line lubrication syste Cofort-Oriented Cab Design Tinted lainated safety glass Arored front window Adjustable air suspended seat A/C with dust filter in fresh / recirculated air Pressurization to prevent dust penetration (optional) Optional Operator Cofort Kit: sun blinds, bottle cooler, reading light, preiu seat with cooling / airing syste, electronic weight adjustent R

8 Reliability Ready to Work When You Need It With over 50 years of innovative thinking, engineering and anufacturing excellence, Liebherr sets the industry standard for advanced equipent design and technology tools to provide the ost up-to-date product, responding to the requireents of ining custoers. 8 R 9100

9 Quality: the Liebherr Tradeark Long-lasting Job Perforances Liebherr Coponents Integration As an OEM, Liebherr has built a solid reputation for its developent and production of high quality strategic ining coponents. The R 9100 integrates robust and reliable ining optiized coponents that are developed, anufactured and controlled by Liebherr ensuring reliable perforance for the entire achine. Machine Reliability Survey Based on years of experience and the systeatic easureent of key perforance indicators of the achine behavior in the field, the Liebherr Mining Reliability Engineering Group is constantly seeking new ways to enhance reliability. Maxiized Coponents Lifetie The R 9100 is equipped with an autoatic single line lubrication syste for the entire attachent and swing ring. All greasing points are suitably protected against external daages, extending coponent life and ensuring constant perforance over the excavator s operational life. Rugged Undercarriage Structure The R 9100 is ounted on a heavy duty fatigue resistant undercarriage and is equipped with the proven track chain syste fro heavier Liebherr excavators. Designed and built for both shovel and backhoe configuration, the R 9100 provides the necessary stability and reliability. Quality Manageent Continuous Iproveent Liebherr quality begins during achine design and siulations. Liebherr eets the highest standards for special selection of steels and casting aterials. Based on the expertise of certified internal auditors and a highly qualified workforce, all anufacturing process steps are devised to provide the ost coprehensive control, onitoring and traceability. Liebherr- Mining Equipent Colar SAS is ISO 9001 certified. Liebherr Coponent Integration Diesel engine Hydraulic pups and otors Electronic and control technology Swing and travel drives Hydraulic cylinders Splitter box Swing ring GET Quality Coitent Liebherr-Mining Equipent Colar, France, ISO 9001 certified Copliance of aterials tested in laboratory Quality control during the stages of production Vertical integration practice Arctic Package (optional) Designed for reliability in regions with teperatures of down to 50 C / 58 F: Integrated into achine structure Start up easily even at very low teperatures Increases achine availability and coponent lifetie Optiu operator cofort even in harsh teperature conditions Facilitate achine servicing R

10 Custoer Service World-Class Support, Everywhere, Every Day By partnering with our custoers, Liebherr ipleents tailored solutions fro technical support, spare parts and logistics solutions to global aintenance for all types of equipent, all over the world. 10 R 9100

11 Custoer Support Reanufacturing Genuine Parts International Service Organization The Liebherr Service Support has always been an iportant focus for the copany. Coplete service during all operating phases fro achinery installation to proble solving, spare parts inventory and technical service. Our service tea is close to our custoers, delivering the best specific aintenance solution to reduce both equipent downtie and repair costs. Coplete Training Progra Fro fully trained technicians to a full tea of certified field service engineers, Liebherr coits to provide you with world class training. Dedicated to ining, the Liebherr training tea provides aintenance staff training progras to allow cost-efficient and safe operations. Reduced Costs and Investent Over the course of a ining achine s lifetie, ajor coponents ust be replaced to ensure continued safety, productivity and reliability. The Liebherr Mining Reanufacturing Progra offers custoers an OEM alternative to purchasing brand new replaceent coponents. Enabling custoers to achieve lowest possible equipent lifecycle costs without coproising quality, perforance or reliability. Fast Availability A international service network and coponent facilities worldwide eans that coponent repair services and exchange coponents are available to custoers regardless of their location. Perforance Using genuine Liebherr coponents ensures the best interaction within your achine, encouraging optial perforance and ost effective achine operation and you can be sure that you are in line with the latest iproveents and updates on parts: providing peace-ofind as all ajor coponents are tracked in the Liebherr Maintenance Manageent Syste. Partnership Liebherr regularly reviews requireents for parts and coponents for individual achines, based on operating hours, consuption and planned aintenance, resulting in iniized down tie for custoers. With access to the Global stock via all Liebherr Mining Warehouses, you will iprove productivity by having the part you need, when you need it. Troubleshoot Advisor Platfor Unique aintenance syste to help you identify probles Easy and friendly-user interface Copatible with obile, tablet or laptop Regular updating of the database Procedures described by specialist with iages and videos Repair and Reanufacturing Progras Liebherr certified quality As-new warranty OEM expertise Reduced costs and investent Fast availability Easy Access Parts Online Available any tie anywhere User friendly interface Online ordering Save tie and oney R

12 Safety Protecting Your Most Iportant Assets The Liebherr R 9100 provides uncoproising safety for operators and aintenance crew. As it is designed to be serviced fro one side, the R 9100 allows effortless access facilities to the ajor service points for quick and safe aintenance. The R 9100 s newly designed cab is reinforced for operator safety. 12 R 9100

13 Safety-First Working Conditions Efficient Machine Protection Safe Service Access The R 9100 is fitted with ergonoic access for fast and safe aintenance. All service points are within reach fro one side and at achine level. The R 9100 s upperstructure is accessible via a robust fixed ladder and integrates one large central platfor equipped with slip resistant surfaces. Secure Maintenance All coponents have been located to allow for effortless inspection and replaceent. Nuerous service lights are strategically located in the service areas to sustain suitable aintenance conditions, day or night. Eergency stops have been strategically placed in the cab, engine copartent and at ground level. The R 9100 eliinates hazards to ensure a safe environent for the service staff during aintenance. Protection Against Fire Ignition The engine copartent integrates a bulkhead wall that separates the engine fro the hydraulic pups. This reduces the risk of hydraulic oil entering the engine copartent. The turbochargers and exhaust systes are heat shielded, and all the hydraulic hoses are ade fro a fire resistant aterial. Autoatic Fire Suppression Syste The R 9100 can be equipped with a fully integrated fire suppression, eploying a dual agent solution to prevent and protect the achine. The fire suppression syste has both autoatic and anual release capabilities, eergency stop devices are strategically located on the achine to be easily accessible in any case by the operator. User Friendly Maintenance All walkways with slip-resistant surfaces Eergency ladder available near the cab Wide open service access Reflective stripes on counterweight 45 hydraulic driven access stair (optional) Working Environent Control Rear and side caera syste LCD color screen to display caeras view 4 Long-range working halogen lights (xenon / LED in option) Coitent to Eployees Safety Safe and protected access to the coponents Major coponents centralized to be easily accessible Optional ground-level fluid aintenance hub E-stops located for the operator and aintenance staff R

14 Environent Mining Responsibly Liebherr considers the conservation and preservation of the environent as a ajor challenge for the present and future. Liebherr are considerate of environental issues in designing, anufacturing and anaging achine structures, providing solutions that allow custoers to balance perforance with environental consciousness. 14 R 9100

15 Miniized Ipact on Life Sustainable Design and Manufacturing Process Optiized Energy Consuption, Fewer Eissions The intelligent energy anageent syste facilitates interaction between the hydraulic syste and engine output with the goal of axiu perforance with iniu consuption. In Eco-Mode setting, the achine is set up to reduce engine load, significantly iprove fuel consuption and reduce eissions. Controlled Eission Rejection The R 9100 is powered by a high horsepower diesel engine which coplies with the US / EPA Tier 2 or Tier 4i copliant eission liits. This power drive akes the R 9100 cost effective without coproising productivity and reduces the achines ipact on the environent. Certified Environent Manageent Systes Subject to the stringent European progra for the regulation of the use of cheical substances in the anufacturing process (REACH*), Liebherr undertakes a global evaluation to iniize the ipacts of hazardous aterial, pollution control, water conservation, energy and environental capaigns. Extended Coponents and Fluids Lifetie Liebherr is constantly working on ways to extend coponent life. Through the Exchange Coponents progra, superior lubrication systes and the reinforceent of parts under stress, Liebherr can reduce frequency of part replaceent. The result iniizes environental ipact and lowers the overall total cost of ownership. *REACH is the European Counity Regulation on cheicals and their safe use (EC 1907/2066) It deals with the Registration, Evaluation, Authorization and Restriction of Cheical Substances. Reanufacturing Progra Second life for your ajor coponents Liebherr certified quality Reduced environental ipact Reduced costs and investent Eco-Mode The Eco-Mode can be anually selected by the operator when axial power is not required according to job need for: An iproved fuel efficiency Less load on the engine Less noise pollution Less dioxide carbon eissions Autoatic Idle Control Electronic idle control of the engine results in: Less fuel consuption Less load on the engine Reduced eissions More cofort to the operator (reduced noise pollution) R

16 Technical Data Engine 1 Liebherr diesel engine Rating per ISO 9249 Model Type Bore / Stroke Displaceent Engine operation Cooling Air cleaner Fuel tank Engine idling Electrical syste Voltage Batteries Starter Alternator RPM adjustent Swing Drive 565 kw (757 HP) at 1,800 rp Liebherr D9512 (US / EPA Tier 2, Tier 4i copliant or fuel consuption optiized setting) V12 cylinder engine 128 / 157 / 5.04 / 6.18 in l / 1,479 in3 4-stroke diesel coon-rail direct injection turbo-charged water-cooled, hydrostatic fan drive dry-type air cleaner with pre-cleaner, priary and safety eleents, autoatic dust discharge 1,478 l / 390 gal (2,580 l / 682 gal optional) electronically controlled 24 V 4 x 75 Ah / 12 V 24 V / 2 x 8.4 kw 24 V / 140 A brushless adjustent of engine output via rp selector Hydraulic Controls Power distribution Flow suation Closed-loop circuit Servo circuit Attachent and swing Travel Shovel flap functions 16 R 9100 via onoblock control valves with integrated priary relief valves and secondary valves to attachent and travel drive for uppercarriage swing drive Hydraulic otor Swing gear Swing ring Swing speed Swing-holding brake Hydraulic Syste Hydraulic pup for attachent and travel drive Max. flow Max. pressure for swing drive Max. flow Max. pressure Pup anageent Hydraulic tank capacity Hydraulic syste capacity Hydraulic oil filter Hydraulic oil cooler MODE selection proportional via hydraulic joystick levers proportional via hydraulic pedals or reovable hand levers proportional via hydraulic pedals 2 Liebherr axial piston otors 2 Liebherr planetary reduction gears Liebherr, sealed single race ball bearing swing ring, internal teeth rp wet ulti-disc brakes, spring applied, hydraulically released ECO POWER 3 Liebherr variable flow axial piston pups 3 x 435 l/in. / 3 x 115 gp 350 bar / 5,076 psi 1 Liebherr reversible swashplate pup, closed-loop circuit 420 l/in. / 111 gp 350 bar / 5,076 psi electronically controlled pressure and flow anageent with oil flow optiisation 1,000 l / 264 gal 1,400 l / 370 gal 1 high pressure safety filter after each high pressure pup + extra-fine filtration of entire return flow with integrated by-pass filtration (15 / 5 μ) + dedicated leak-oil filtration 1 separated cooler, teperature controlled fan driven via 1 hydraulic piston otor adjustent of achine perforance and the hydraulics via a ode selector to atch application for econoical operation (can be cobined with fuel optiized setting) for axiu digging power and heavy duty jobs

17 Electric Syste Electric isolation Working lights Eergency stop switches Electrical wiring easy accessible battery isolators high brightness halogen lights: 2 on working attachent 1 on RHS of uppercarriage 1 on LHS of uppercarriage Xenon or LED lights in option in the cab / in engine copartent heavy duty execution in IP 65 standard for operating conditions of 50 C to 100 C / 58 F to 212 F Undercarriage Version Drive Travel gear Travel speed Track coponents Track rollers / Carrier rollers Track pads Track tensioner Parking brake Brake valves Uppercarriage Design Attachent ounting Catwalks torque resistant odular design upper frae parallel length girders large catwalk on the left-hand side Operator s Cab Design Operator s seat Joysticks Condition onitoring Display Rear vision syste Heating syste Noise level (ISO 6396) sound insulated, tinted windows, front window arored glass, door with sliding window air suspended, body-contoured with shock absorber, adjustable to operator s weight joystick levers integrated into arrest of seat, arrest adjusted to seat position achine condition onitoring syste with error reporting and operational inforation color LCD-display with low and high brightness settings caera installation on counterweight and right-hand side of the uppercarriage, displayed over the LCD- display standard autoatic air conditioning, cobined cooler / heater, additional dust filter in fresh air / recirculated Diesel: LpA (inside cab) = 78 db(a) with oil / water fans at 70 % and AC fan at 65 % heavy duty Liebherr swashplate otors Liebherr planetary reduction gears k/h / ph track pitch 280 / in, aintenance-free 8 / 2 per side frae double grouser spring with grease tensioner wet ulti-discs (spring applied, pressure released) integrated in ain valve block Central Lubrication Syste Type Grease pup Capacity Refill centralised anual lubrication syste for the entire attachent / swing ring bearing (autoatic syste in option with 30 l / 7.9 gal bulk container refillable via quick connection and grease filter) autoatic lubrication syste for the swing ring teeth 1 electric pup for swing teeth lubrication 8 l / 2.1 gal bulk container for swing ring teeth via quick connector, refill line with grease filter Attachent Design Hydraulic cylinders Hydraulic connections Pivots Pivots bucket-to-stick Pivots bucket-to-link box-type, cobination of resistant steel plates and cast steel coponents Liebherr design pipes and hoses equipped with SAE flange connections sealed, low aintenance O-ring sealed and copletely enclosed R

18 Diensions A2 A1 A D W H OEL C K P Q L U R0350 N S B G Z V X A A1 A2 B C D G H K L N P Q S U Z OEL Operator s eye level Stick length / ft in V 3.20 / 10'5" 4.50 / 14'9" 5.60 / 18'4" W 3.20 / 10'5" 4.50 / 14'9" 5.60 / 18'4" X 3.20 / 10'5" 4.50 / 14'9" 5.60 / 18'4" / ft in 3,920 / 12'10" 4,337 / 14' 2" 5,752 / 18'10" 4,780 / 15' 8" 4,143 / 13' 7" 4,630 / 15' 2" 5,031 / 16' 6" 4,114 / 13' 5" 1,803 / 5'10" 4,810 / 15' 9" 500 / 1'7" 600 / 1'11" 750 / 2' 5" 1,663 / 5' 5" 812 / 2' 7" 3,900 / 12' 9" 6,107 / 20' 7,683 / 25' 2" 3,533 / 11' 7" F Mono boo 7.60 / 24'11" / ft in 9,660 / 31'8" / / 6,035 / 19'9" / / 14,560 / 47'9" / / Mono boo 9.20 / 30'2" / ft in 11,445 / 37'6" 9,930 / 32'6" 9,890 / 32'5" 6,210 / 20'4" 6,800 / 22'3" 7,550 / 24'9" 16,080 / 52'8" 15,385 / 50'5" 14,825 / 48'7" A D C W1 OEL H K L U V1 18 R 9100 Q N Z X1 / ft in 3,920 / 12'10" 4,337 / 14' 2" 5,752 / 18'10" 4,780 / 15' 8" 5,340 / 17' 6" 4,630 / 15' 2" 2,000 / 6' 6" 5,031 / 16' 6" 4,114 / 13' 5" 1,803 / 5'10" 4,810 / 15' 9" A A1 A2 B C D F G H K L A2 A1 N P Q S U V1 W1 X1 Z OEL Operator s eye level P R0349 S B G / ft in 500 / 1'7" 600 / 1'11" 750 / 2' 5" 1,663 / 5' 5" 812 / 2' 7" 3,900 / 12' 9" 6,107 / 20' 12,350 / 40' 6" 6,035 / 19' 8" 15,530 / 51' 7,683 / 25' 2" 4,733 / 15' 6"

19 Backhoe Attachent with Mono Boo 7.60 / 24'11" ft Digging Envelope R0351 Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height R ft in ft in ft in ft in ft in '5" '5" '7" '4" '7" Max. digging force (ISO 6015) kn 415 lbf 93,296 Max. breakout force (ISO 6015) kn 560 lbf 125, Operating Weight and Ground Pressure -3-4 The operating weight includes the basic achine with ono boo 7.60 / 24'11", stick 3.20 / 10'5" and bucket / 9.2 yd Undercarriage Pad width Weight Ground pressure* * according to ISO ft / ft in 600 / 1'11" 750 / 2'5" kg / lb 108,500 / 239, ,615 / 241,650 kg/c2 / psi 1.72 / / Backhoe Buckets For aterials class according to VOB, Section C, DIN Typical operation according to VOB Section C, DIN Capacity ISO yd3 Suitable for aterial up to a specific weight of t/3 lb/yd3 Weight kg lb GP: General purpose bucket with Liebherr Z90 teeth : Heavy-duty bucket with Liebherr Z100 teeth X: Heavy-duty rock bucket with Liebherr Z100 teeth <5 GP ,530 7,100 15,653 <5 GP ,782 6,900 15, ,530 7,560 16, ,035 7,200 15, ,541 6,700 14, X ,782 8,110 17, X ,373 7,420 16, X ,879 7,130 15,719 R

20 Backhoe Attachent with Mono Boo 9.20 / 30'2" ft R0352 Digging Envelope Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height R 2650 R 2800 R 2800 ft in ft in ft in ft in ft in '5" '7" '3" '6" '1" '9" '10" '1" '2" '6" '4" ' '4" '8" '6" Max. digging force (ISO 6015) kn lbf 92,172 74,186 64,070 Max. breakout force (ISO 6015) kn lbf 119, , ,149 Operating Weight and Ground Pressure The operating weight includes the basic achine with ono boo 9.20 / 30'2", stick 4.50 / 14'9" and bucket / 5.5 yd3. Undercarriage Pad width Weight Ground pressure* * according to ISO / ft in 600 / 1'11" 750 / 2'5" kg / lb 111,060 / 244, ,080 / 247,100 kg/c2 / psi 1.76 / / ft Backhoe Buckets For aterials class according to VOB, Section C, DIN Typical operation according to VOB Section C, DIN Capacity ISO yd3 Suitable for aterial up to a specific weight of with stick 3.20 t/3 with stick 10'5" lb/yd3 with stick 4.50 t/3 with stick 14'9" lb/yd3 with stick 5.60 t/3 with stick 18'4" lb/yd3 Weight kg lb GP: General purpose bucket with Liebherr Z90 teeth : Heavy-duty bucket with Liebherr Z100 teeth 20 R 9100 <5 GP ,024 6,800 14, , ,024 7,100 15, , , ,024 6,400 14, , , ,530 5,300 11, , , ,035 4,600 10, , ,373 4,000 8,818

21 Face Shovel Attachent with Shovel Boo 5.30 / 17'4" ft Digging Envelope R R Stick length Max. reach at ground level Max. duping height Max. crowd length Bucket opening width T / 12'1" / 35'1" 7.60 / 25' 3.70 / 12'1" 2,000 / 6'6" 8 7 Max. crowd force at ground level (ISO 6015) Max. crowd force (ISO 6015) Max. breakout force (ISO 6015) T kn / 122,521 lbf 704 kn / 158,265 lbf 585 kn / 131,513 lbf 5 4 Operating Weight and Ground Pressure 3 2 The operating weight includes the basic achine with shovel attachent and bucket / 9.2 yd Undercarriage Pad width Weight Ground pressure* * according to ISO / ft in 600 / 1'11" 750 / 2'5" kg / lb 113,500 / 250, ,600 / 252,650 kg/c2 / psi 1.80 / / ft Face Shovel Buckets For aterials class according to VOB, Section C, DIN Typical operation according to VOB Section C, DIN Capacity ISO yd3 Suitable for aterial up to a specific weight of t/3 lb/yd3 Weight kg lb GP: General purpose bucket with Liebherr Z90 teeth : Heavy-duty bucket with Liebherr Z100 teeth X: Heavy-duty rock bucket with Liebherr Z100 teeth <5 GP ,192 12,600 27,778 <5 GP ,867 11,400 25, ,698 12,000 26, ,035 11,400 25, ,373 11,000 24, ,047 10,400 22, X ,530 13,200 29, X ,035 12,400 27, X ,710 11,600 25,574 R

22 Optional Equipent Uppercarriage Electric-powered refueling pup Increased fuel tank capacity (24h operation) LED lighting (11 pieces) Xenon lighting (11 pieces) Grid protection for front headlights Sei-autoatic swing brake with joystick control Wiggins / Banlaw / other brand nae couplings for ground level access service Wiggins / Banlaw / other brand nae counter plugs (service trucks) Wiggins / Banlaw / other brand nae fast fueling syste Wiggins / Banlaw / other brand nae fast fueling syste with Multiflo Hydrau-Flo Steel grease lines on swing ring Hydraulically operated 45 access stair Swing ring scrapers Hydraulic-powered grease refill station Rock protection for swing gear and grease lines Operator s Cab 4-point seat belt Cab elevation (1,200 / 3'9") Cab pressurization FOPS top guard Operator cofort package Front protective grid Pre-heating syste for cab Attachent Piston rod guard for bucket cylinder (BH) Piston rod guard for hoist cylinders (FS) Specific Solutions Arctic package ( 20 C / 4 F, 30 C / 22 F, 40 C / 40 F, 50 C / 58 F) Sound attenuation package Safety Additional LED lighting with tier (ain access) Autoatic fire suppression syste Hydraulic Syste Oil cooler inlet screen General Maritie transport packaging Engine Fuel consuption optiized engine version (non-certified) Liebherr-Mining Equipent Colar SAS 49 rue Frédéric Hartann, FR Colar Cedex S , Fax info.lec@liebherr.co Printed in Gerany by Eberl RG-BK LEC/SP _enGB-US All illustrations and data ay differ fro standard equipent. Subject to change without notice. All indicated loads are based in accordance with ISO Undercarriage Narrow track pad width (500 / 1'7") Large track pad width (750 / 2'5") Reovable side fraes travel gear for uddy applications Rock protection for idler wheel Rock protection for undercarriage center frae