Crawler Excavator R 914 Compact

Transcription

1 Crawler Excavator R 9 Copact litronic` Operating Weight:,, kg Engine: 9 kw / HP Stage I Bucket Capacit:..

2 Technical Data Diesel Engine Rating per ISO 99 Model Tpe Bore / Stroke Displaceent Engine operation Air cleaner Engine idling Electrical sste oltage Batteries Alternator Stage I Harful eissions values Eission control Option Fuel tank Urea tank Hdraulic pup for attachent and travel drive Max. flow Max. pressure Hdraulic pup regulation and control x Ah / three-phase current / A MODE selection in accordance with 9//EG stage I Liebherr-SCR technolog Deutz particle filter l l Cooling Sste Diesel engine Hdraulic Sste 9 kw ( HP) at, RPM Deutz TCDL clinder in-line 9 / l -stroke diesel Coon-Rail turbo-charged and after-cooler reduced eissions dr-tpe air cleaner with pre-cleaner, priar and safet eleents sensor controlled Hdraulic tank Hdraulic sste Hdraulic oil filter S (Sensitive) E (Eco) P (Power) Engine speed and perforance setting Option water-cooled copact cooling sste consisting cooling unit for water, hdraulic oil and charge air with stepless therostaticall controlled fan, fans for radiator cleaning, can be copletel folded awa Swing ring Hdraulic Controls Servo circuit Attachent and swing Chassis Additional functions Proportional control R 9 Copact Litronic via control valves with integrated safet valves, siultaneous and independent actuation of chassis, swing drive and attachent with hdraulic pilot control and proportional jostick levers electroproportional via foot pedal via switch or electroproportional foot pedals proportionall acting transitters on the josticks for additional hdraulic functions l/in. bar Liebherr-Snchron-Cofort-sste (LSC) with electronic engine speed sensing regulation, pressure and flow copensation, torque controlled swing drive priorit l ax. l ain return filter with integrated partial icro filtration ( µ) adjustent of engine and hdraulic perforance via a ode pre-selector to atch application, e.g. for especiall econoical and environentall friendl operation or for axiu digging perforance and heav-dut jobs ode for precision work and lifting through ver sensitive oveents ode for especiall econoical and environentall friendl operation ode for high perforance with low fuel consuption stepless alignent of engine output and hdraulic power via engine speed Tool Control: ten preadjustable pup flows and pressures for add on tools Swing Drive Drive Power distribution Liebherr axial piston variable displaceent pup Swing speed Swing torque Holding brake Option Liebherr axial piston otor with integrated brake valve and torque control Liebherr, sealed race ball bearing swing ring, internal teeth. RPM stepless kn wet ulti-disc (spring applied, pressure released) pedal controlled positioning swing brake

3 Operator s Cab Cab Operator s seat Operator s seat Cofort (Option) Operator s seat Preiu (Option) Control sste Operation and displas Air-conditioning ROPS safet cab structure (roll-over protection sste) with individual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a sliding window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddaping insulating, tinted lainated safet glass, separate window shades for the sunroof window and windscreen air cushioned operator s seat with D-adjustable arrests, headrest, lap belt, seat heater, anual weight adjustent, adjustable seat cushion inclination and length and echanical lubar vertebrae support in addition to operator s seat standard: lockable horizontal suspension, autoatic weight adjustent, adjustable suspension stiffness, pneuatic lubar vertebrae support and passive seat cliatisation with active coal in addition to operator s seat cofort: active electronic weight adjustent (autoatic readjustent), pneuatic low frequenc suspension and active seat cliatisation with active coal and ventilator josticks with ar consoles and swivel seat, folding left ar console large high-resolution operating unit, selfexplanator, colour displa with touchscreen, video-copatible, nuerous setting, control and onitoring options, e.g. air conditioning control, fuel consuption, achine and tool paraeters autoatic air-conditioning, recirculated air function, fast de-icing and deisting at the press of a button, air vents can be operated via a enu; recirculated air and fresh air filters can be easil replaced and are accessible fro the outside; heating-cooling unit, designed for extree outside teperatures, sensors for solar radiation, inside and outside teperatures (countr-dependent) Drive Transission Travel speed Pulling force Tracks Track pads Holding brake Brake valves Lashing ees Liebherr copact planetar reduction gear with Liebherr axial piston otor per side of undercarriage Liebherr copact planetar reduction gear low range k/h high range. k/h kn sealed and greased triple grouser wet ulti-disc (spring applied, pressure released) integrated into travel otors integrated Attachent Tpe Hdraulic clinders Bearings high-strength steel plates at highlstressed points for the toughest requireents. Coplex and stable ountings of attachent and clinders Liebherr clinders with special seal sste as well as shock absorption sealed, low aintenance Coplete Machine Lubrication Noise eission ISO 9 //EC Liebherr central lubrication sste for uppercarriage and attachent, autoaticall L pa (inside cab) = db(a) LWA (surround noise) = 99 db(a) R 9 Copact Litronic

4 Diensions D E A C W H K P Q N M L U H S B B X I J M T L U R 9 Copact Litronic B B B H9

5 Std A, C,9 D, E, H,9 I J K, L, M, P 9 Q S, T U, U N E B,,, B B,,, E = Tail radius R,,,,,,,,9,,,9,,,, 9,,,,,,, Stick Two-piece boo. Std,,,,,,*,,* W,,,,,,*,,* X,,,,,,*,,* Stick Offset two-piece boo Std,,,,,,,,* W,,,,,,,,* X,,,,,,,,* * turned Mono boo. Std,,,,*,,*,,*,9,9,9,9*,,*,,*,,,,*,,*,,* Offset ono boo. Std,,*,,*,,*,,*,,*,9,9*,,*,,*,,*,,*,,*,,* E G Boo N E H9 Two-piece boo. Two-piece boo. Two-piece boo. Two-piece boo. Stick G,,,, R,,,, E,,,, R 9 Copact Litronic

6 Backhoe Bucket with Two-Piece Boo. ft H9 9 Digging Forces without quick coupler Max. digging force (ISO ) ft without blade down Weight Capacit ISO ) Cutting width Buckets Machine stabilit per ISO * ( % of tipping capacit) Stick length () Stick length () kg ). ). ). ).9 ). 9 ).,).,). ). ). ). ). ).9 ).,).,). * Indicated loads are based on ISO and do not exceed % of tipping or % of hdraulic capacit, ax. stick length without quick coupler, lifted on fir ) coparable with SAE (heaped) ) Bucket with teeth (also available in HD version) ) Bucket with cutting edge (also available in HD version) Buckets up to cutting width with liited digging depth Max. aterial weight = t/, = t/, =. t/, = not authorised versions Pad width Weight kg,,,,,, Ground pressure kg/c The operating weight includes the basic achine with triple grouser pads, two-piece boo., stick, quick coupler SW and bucket / Operating Weight and Ground Pressure kn.9. t..9.. kn.... t kn ( t) Max. breakout force with ripper bucket - Max. breakout force (ISO ) Digging Envelope with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height Min. attachent radius R 9 Copact Litronic

7 Lift Capacities with Two-Piece Boo. Stick Stick......*.* *.*.*.* 9.* 9.*.*.*.*.*.*.*.*....*.* * *..*...*..*..*.*.*.. *.*.*.*.*.* * * *.9 * * * Stick..... Height *.* 9.* 9.*.*.*.*.*.*.*. * *... * *.*.*.*.*..*..*..*..* *.* * *. * * * * * * *....* * * * *.* Stick *.* 9.* 9.*.*.*.*.*.*.* * * * *.*.. * * * * *.*.*.*..*...*..* Can be slewed through * *.*.* * *. * *. * * * * * In longitudinal position of undercarriage.9.* *.* 9.* 9.*.*.*.*.*.*.*.*.* * * * *.. Max. reach.* * * * * *.*.*..*...*. * *. * * * * *.*.* *.. *.* * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the stabilizers with the stabilizers down. The values appl to track pads easuring in width when the adjusting clinder is in the optial position. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European EN -, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. R 9 Copact Litronic

8 Backhoe Bucket with Mono Boo. ft H9 9 Digging Forces without quick coupler Max. digging force (ISO ) versions Pad width Weight kg,,9,,,, Ground pressure kg/c ft without blade down Weight Capacit ISO ) Cutting width Buckets Machine stabilit per ISO * ( % of tipping capacit) Stick length () Stick length () kg ). ). ). ).9 ). 9 ).,).,). ). ). ). ). ).9 ).,).,). * Indicated loads are based on ISO and do not exceed % of tipping or % of hdraulic capacit, ax. stick length without quick coupler, lifted on fir ) coparable with SAE (heaped) ) Bucket with teeth (also available in HD version) ) Bucket with cutting edge (also available in HD version) Buckets up to cutting width with liited digging depth Max. aterial weight = t/, = t/, =. t/, = not authorised The operating weight includes the basic achine with triple grouser pads, ono boo., stick, quick coupler SW and bucket / Operating Weight and Ground Pressure kn.9. t..9.. kn.... t kn ( t) Max. breakout force with ripper bucket - Max. breakout force (ISO ) Digging Envelope with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height Min. attachent radius R 9 Copact Litronic

9 Lift Capacities with Mono Boo. Stick Stick * *.*.9*.* *.* 9.* 9.*.*.* * *.*. * *.*.* * *..9*..*...* *.. * *.*.*.*.* * *.9*.*..* Height..*.* *.* 9.* 9.*.*.* 9.* 9.*.*.* * * *. * * * *.*.*..*...*. *.9*.*.*. * * *...* * *.*.*.* Stick..... Stick..*.* *.*.* 9.* 9.*.*.* 9.* 9.*.*.*.* * * * *.9 * * * *.*.*..*..*. Can be slewed through.9* * *.*.*....* * *.9 *.*.* In longitudinal position of undercarriage.*.* *.*.*.*.*.9*.9* 9.* 9.*.*.*.9*.* * * * *.9.9 Max. reach * * * *.*.*..*..*.*..9* * * * * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the stabilizers with the stabilizers down. The values appl to track pads easuring in width. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European EN -, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. R 9 Copact Litronic 9

10 Backhoe Bucket with Offset Two-Piece Boo ft Digging Envelope H9 with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height Min. attachent radius with stick with stick with stick with stick at ax. attachent offset with vertical ditch walls without quick coupler Max. digging force (ISO ) Max. breakout force with ripper bucket Operating Weight and Ground Pressure The operating weight includes the basic achine with triple grouser pads, offset twopiece boo, stick, quick coupler SW and bucket /.. ft R versions Pad width Weight kg,,,,,9, Ground pressure kg/c without blade down Weight Capacit ISO ) Cutting width Buckets Machine stabilit per ISO * ( % of tipping capacit) Stick length () Stick length () kg ). ).9 ). 9 ).,).,). ). ). ).9 ).,).,). * Indicated loads are based on ISO and do not exceed % of tipping or % of hdraulic capacit, ax. stick length without quick coupler, lifted on fir ) coparable with SAE (heaped) ) Bucket with teeth (also available in HD version) ) Bucket with cutting edge (also available in HD version) Max. aterial weight = t/, = t/, =. t/, = not authorised.. 9. kn.9. t..9.. kn.... t kn ( t) Max. breakout force (ISO ) Digging Forces with stick with stick with stick with stick with set straight boo R 9 Copact Litronic

11 Lift Capacities with Offset Two-Piece Boo Stick Stick *.....*.* 9.* 9.* 9.* 9.*.*.* 9.* 9.* *.. * *.*.*..*..*..*.* * * *... * *.* * * * * * * * * * * * Stick..... Height.* *.9* 9.* 9.* 9.* 9.* 9.9* 9.9*.*.*. * *.. * *.*.*.*.*..9*..*..*.* * *.*.*.. * * * * * *......* * * *.9 *.*.* Stick.. * * * 9.* 9.* 9.* 9.* 9.* 9.*.*.* * * *.*. * * *.*.*.*.*..*..*..*.9* *. Can be slewed through * * *.*..*. * * * * In longitudinal position of undercarriage * * * *..*....*......*.* 9.* 9.* 9.* 9.* 9.* 9.*.*.*.*.*...9 Max. reach *.* * *..*..*..*.*. * * * * *.... * * * * * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the stabilizers with the stabilizers down. The values appl to track pads easuring in width when the adjusting clinder is in the optial position. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European EN -, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. R 9 Copact Litronic

12 Backhoe Bucket with Offset Mono Boo. ft Digging Envelope H9 with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height Min. attachent radius with stick with stick with stick with stick at ax. attachent offset with vertical ditch walls Digging Forces without quick coupler Max. digging force (ISO ) kn.9. t..9.. kn.... t kn ( t) Max. breakout force (ISO ) with stick with stick with stick with stick with set straight boo 9 Max. breakout force with ripper bucket Operating Weight and Ground Pressure ft The operating weight includes the basic achine with triple grouser pads, offset ono boo., stick, quick coupler SW and bucket /.. R versions Pad width Weight kg,,,,,, Ground pressure kg/c without blade down Weight Capacit ISO ) Cutting width Buckets Machine stabilit per ISO * ( % of tipping capacit) Stick length () Stick length () kg ). ).9 ). 9 ).,).,). ). ). ).9 ).,).,). * Indicated loads are based on ISO and do not exceed % of tipping or % of hdraulic capacit, ax. stick length without quick coupler, lifted on fir ) coparable with SAE (heaped) ) Bucket with teeth (also available in HD version) ) Bucket with cutting edge (also available in HD version) Max. aterial weight = t/, = t/, =. t/, = not authorised R 9 Copact Litronic

13 Lift Capacities with Offset Mono Boo. Stick Stick..... * *.* * *.*.* 9.* 9.* 9.9* 9.9* 9.* 9.* * *.*.*...9.*.*.*.*..*..*. * *. * *.* * * * * * *.*.* Stick..... Height.*.* *.* 9.* 9.*.*.* 9.* 9.*.*.*. * * *..9.9 * *.* *.*.*..9*...*.*.*. *.* * * * * *.. * * * * * Stick..* * 9.* 9.*..* 9.* 9.* *.* * * *.9 * * * *.*.*..*..*..*.*. Can be slewed through * *. * * *..* In longitudinal position of undercarriage.9*.9* *.9*.*.*.*.* 9.* 9.*.*.* * * * * Max. reach * * * *..*..*..*..* *. * * *.* * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the stabilizers with the stabilizers down. The values appl to track pads easuring in width. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European EN -, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. R 9 Copact Litronic

14 Attachents Ditch Cleaning Buckets / Tilt Buckets without blade Weight Capacit ISO ) Cutting width Ditch Cleaning Buckets Machine stabilit per ISO * ( % of tipping capacit) kg Two-piece boo.,).,). 9,). 9,).,). 9 Mono boo.,).,). 9,). 9,).,). 9 Offset two-piece boo,).,). 9,). 9,).,). 9 Offset ono boo.,).,). 9,). 9,).,). 9 down Stick length () Stick length () without blade down Weight Capacit ISO ) Cutting width Tilt Buckets Machine stabilit per ISO * ( % of tipping capacit) Stick length () Stick length () kg Two-piece boo.,). Mono boo.,). Offset two-piece boo,). Offset ono boo.,). * Indicated loads are based on ISO and do not exceed % of tipping or % of hdraulic capacit, ax. stick length without quick coupler, lifted on fir ) coparable with SAE (heaped) ) with x rotator ) rigid ditch cleaning bucket Max. aterial weight = t/, = t/, =. t/, = not authorised R 9 Copact Litronic

15 Equipent Stabilizer blade triple grouser track pads rubber track pads (Bridgestone) Track pads, variants Travel speed levels (two) One-piece chain guide Three-piece chain guide Load holding valve on each stabilization clinder Cutting edge on the stabilizer blade Protection for piston rods, stabilizer clinder Tool equipent, extended Operator s Cab Uppercarriage Uppercarriage right side light, piece, LED Uppercarriage rear light, pieces, LED Refuelling sste with filling pup Main batter switch for electrical sste Engine hood with gas spring Warning beacon on uppercarriage, LED Service doors, lockable Hdraulic Sste Shut-off valve between hdraulic tank and pup(s) Pressure test fittings Accuulator for controlled lowering of the attachent with the engine shut down Hdraulic oil filter with integrated icrofilter Liebherr hdraulic oil fro C to C Liebherr hdraulic oil, biologicall degradable Liebherr hdraulic oil, speciall for war or cold regions Bpass filter Switchover high pressure circuit and tipping clinder Switchover high pressure circuit and two-piece boo Storage copartent Cab lights rear, LED Cab lights front, halogen (under rain cover) Cab lights front, LED (above rain cover) Cab lights front, LED (under rain cover) Mechanical hour eters, readable fro outside the cab Roof window ade fro ipact-resistant lainated safet glass Operator s seat Operator s seat Cofort Operator s seat Preiu Driving alar (acoustic signal is eitted during travel, can be switched ON / OFF) Fire extinguisher Front screen ade fro ipact-resistant lainated safet glass not adjustable Windscreen retractable (including upper part) Interittent windscreen wiper with wiper washer Footrest Rubber floor at, reovable Doe light Autoatic air conditioning Fuel consuption indicator Electric cooler LiDAT, vehicle fleet anageent Autoatic engine shut-down (tie adjustable) Eergenc exit rear window Positioning swing brake Proportional control Radio Cofort, control via displa with handsfree set Preparation for radio installation Rain cover over front window opening ROPS cab protection Warning beacon on cab, LED All tinted windows Windscreen wiper, roof Door with sliding window Top guard Front guard Right side window and windshield ade fro lainated safet glass Sun blind Auxiliar heating, adjustable (week tie switch) Electronic iobilizer Cigarette lighter Diesel Engine Deutz particle filter Fuel anti-theft device Air pre-filter with dust discharge Preheating fuel R 9 Copact Litronic

16 Equipent Coplete Machine Lubrication Lubrication undercarriage, anuall decentralised (grease points) Central lubrication sste for uppercarriage and attachent, autoaticall (without quick coupler and connecting link) * Central lubrication sste, extension for quick coupler Central lubrication sste, extension for connecting link Special coating Custo painting for tools Special coating, variants Monitoring Rear view onitoring with caera Side view onitoring with caera =, = Option * = countr-dependent Options and / or special attachents, supplied b vendors other than Liebherr, are onl to be installed with the knowledge and approval of Liebherr in order to retain warrant. Liebherr-Hdraulikbagger GbH Liebherrstraße, D- Kirchdorf / Iller S 9 -, Fax info.lhb@liebherr.co Printed in Geran b Eberl RG-BK-OT LHB/F 9--._enGB All illustrations and data a differ fro standard equipent. Subject to change without notice. Attachent Boo lights, pieces, halogen Boo lights, pieces, LED Stick lights, pieces, LED High pressure circuit incl. unpressurised return line and Tool Control Hdraulic circuit, extended Load lug on stick Leak oil line, additional for working tools Liebherr ditch cleaning bucket Liebherr quick coupler, hdraulic or echanical Liebherr tilt bucket Liebherr tilt rotator Liebherr backhoe bucket Liebherr tooth sste Liebherr clashell grab Mediu pressure circuit incl. lines Mono boo Offset ono boo Pipe fracture safet valves hoist clinders Pipe fracture safet valve stick clinder Return line, pressureless (in high pressure circuit option included) Hose quick coupling at end of stick Quick coupling sste LIKUFIX Protection for piston rod, bucket clinder Protection for piston rods, stick clinder Protection for botto side of stick Tool Control, tool adjustents selectable over the displa Overload warning device Two-piece boo Offset two-piece boo