Machine for Industrial Applications LH 24 M

Transcription

1 Machine for Industrial Applications LH 24 M litronic` Operating Weight: 23,8 24,3 kg Engine: kw / 43 HP Stage IIIB

2 Technical Data Engine Rating per ISO 9249 Model Type Bore/Stroke Displaceent Engine operation Harful eissions values Eission control Option Cooling Air cleaner Fuel tank Engine idling Electrical syste Voltage Batteries Alternator Power distribution Hydraulic Controls Servo circuit Attachent and swing Travel Additional functions Option kw (43 HP) at,8 RPM Liebherr D834 according to stage IIIB 4 cylinder in-line 8/2 4.6 l 4-stroke diesel Coon-Rail turbo-charged and aer-cooled reduced eissions in accordance with 97/68/EG stage IIIB oxidation catalyst Liebherr particle filter water-cooled with integrated otor oil cooler dry-type air cleaner with pre-cleaner, priary and safety eleents 4 l sensor controlled 24 V 2 x 3 Ah/2 V three phase current 28 V/ A via control valve with integrated safety valves, siultaneous and independent operation of travel drive, swing drive and work with hydraulic pilot control and proportional joystick levers electroproportional via foot pedal via switch or electroproportional foot pedals proportional control, proportionally acting transitters on the joysticks for additional hydraulic functions Hydraulic Syste Hydraulic pup for attachent Liebherr, variable displaceent, swashplate pup and travel drive Max. flow 39 l/in. Max. pressure 3 bar Hydraulic pup Liebherr-Synchron-Cofort-syste (LSC) with regulation and control electronic engine speed sensing regulation, pressure and flow copensation, load sensing and torque controlled swing drive priority Hydraulic tank l Hydraulic syste 32 l Hydraulic oil filter ain return filter with integrated partial icro filtration ( µ) Hydraulic oil cooler copact cooling syste consisting cooling unit for water, hydraulic oil and charge air with stepless therostatically controlled fan MODE selection adjustent of engine and hydraulic perforance via a ode pre-selector to atch application, e.g. for especially econoical and environentally friendly operation or for axiu aterial handling and heavy-duty jobs S (Sensitive) for precision work and liing through very sensitive oveents E (ECO) for especially econoical and environentally friendly operation P (Power) for axiu digging power and heavy duty jobs P+ (Power-Plus) for highest perforance and for very heavy duty applications, suitable for continuous operation Engine speed and stepless alignent of engine output and hydraulic perforance setting power via engine speed Tool Control (Option) ten preadjustable pup flows and pressures for add on tools Drive Transission Swing ring Swing speed Swing torque Brake Option Swing Drive Liebherr swashplate otor with torque control and integrated brake valve Liebherr planetary reduction gear Liebherr, sealed single race ball bearing swing ring, internal teeth 8 RPM stepless kn holding brake (spring applied pressure released) pedal controlled positioning swing brake 2 LH 24 M Litronic Machine for Industrial Applications

3 Technical Data Type Cab Operator s Cab Operator s seat Standard Operator s seat Cofort (Option) Operator s seat Preiu (Option) Control syste Operation and displays Air-conditioning Uppercarriage slewing platfor ade fro high-strength steel plate, designed for the toughest requireents safety cab structure with individual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a side window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddaping insulating, tinted lainated safety glass, separate shades for the sunroof window and windscreen air cushioned operator s seat with headrest, lap belt, seat heater, anual weight adjustent, adjustable seat cushion inclination and length and echanical lubar vertebrae support in addition to operator s seat standard: lockable horizontal suspension, autoatic weight adjustent, adjustable suspension stiffness, pneuatic lubar vertebrae support and passive seat cliatisation with active coal in addition to operator s seat cofort: active electronic weight adjustent (autoatic readjustent), pneuatic low frequency suspension and active seat cliatisation with active coal and ventilator joysticks with ar consoles and swivel seat large high-resolution operating unit, selfexplanatory, colour display with touchscreen, video-copatible, nuerous setting, control and onitoring options, e.g. air conditioning control, fuel consuption, achine and tool paraeters autoatic air-conditioning, recirculated air function, fast de-icing and deisting at the press of a button, air vents can be operated via a enu; recirculated air and fresh air filters can be easily replaced and are accessible fro the outside; heating-cooling unit, designed for extree outside teperatures, sensors for solar radiation, inside and outside teperatures Noise eission ISO 6396 L pa (inside cab) = 7 db(a) 2/4/EC L WA (surround noise) = db(a) Type Drive Transission Travel speed Driving operation Axles Service brake Holding brake Stabilization Option Type Undercarriage Attachent Hydraulic cylinders Bearings Lubrication Coplete Machine torsion-resistant box design ade fro high-strength steel plate, designed for the toughest requireents Liebherr variable flow swashplate otor with autoatic brake valve oversized two speed power shi trans ission with additional creeper speed 3. k/h stepless (creeper speed + transission stage ) 7. k/h stepless (transission stage ) 3. k/h stepless (creeper speed + transission stage 2) 2. k/h stepless (transission stage 2) autootive driving using accelerator pedal, cruise control function: storage of variable accelerator pedal positions 4 t drive axles; anual or autoatic hydraulically controlled front axle oscillation lock two circuit travel brake syste with accuulator; aintenance-free, wet and backlash-free disc brake wet, aintenance-free ulti disc brakes 4 point outriggers blade, at the front, for 4 point outriggers high-strength steel plates at highlystressed points for the toughest requireents. Coplex and stable ountings of attachent and cylinders Liebherr cylinders with special seal syste. Shock absorption sealed, low aintenance central lubrication syste for uppercarriage and attachent, autoatically LH 24 M Litronic Machine for Industrial Applications 3

4 Diensions H26 Choice of Cab Elevation Cab Elevation LFC (Rigid Elevation) Cab Elevation LHC (Hydraulic Elevation) D2 D D C B C2 B2 C B E H27 Increase type LFC 8 LFC 2 Height 8,2 B 3, 3,9 C 4,43 4,443 D A rigid cab elevation has a fixed eye level height. For a lower transport height, the shell of the cab can be reoved and replaced by a transport device. The diension C is in this achine design for all rigid cab elevations 3,47. Increase type LHC 2 B 2,7 B2,247 C 3,243 C2,79 D,286 D2,42 E 3,84 The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any tie within the stroke. Tyres.-2 4 LH 24 M Litronic Machine for Industrial Applications

5 Attachent AF H23 Operating Weight The operating weight includes basic achine with 4 point outriggers, hydr. cab elevation, 8 solid tyres plus interediate rings, industrial-type angled ono boo 6. and industrial-type flat angled stick.. with clashell odel GM B/. 3 shells for loose aterial 23,8 kg Diensions H Undercarriage Stabilizers raised * 3. 4.* pt. outriggers down 4.6* 4.6* 4.* 4.* 9. Stabilizers raised pt. outriggers down 6.* 6.* 4.* 4.* 3.7* 3.7* 7. Stabilizers raised pt. outriggers down 6.2* 6.2*.7*.7* 3.7* 3.7* 3.4* 3.4* 6. Stabilizers raised pt. outriggers down 6.4* 6.4*.8*.8* 4.4.* 3.4* 3.4* 4. Stabilizers raised pt. outriggers down 8.3* 8.3* 7.* 7.*.8 6.* 4.3.3* 3.4* 3.4* 3. Stabilizers raised * pt. outriggers down 4.3* 4.3* 9.9* 9.9* 7.7* 7.7*.6 6.4* 4.2.4* * *. Stabilizers raised * pt. outriggers down 8.4* 8.4*.2*.2* *.4 6.6* 4..* * * Stabilizers raised.*.* pt. outriggers down.*.*..6* *.2 6.6* 3.9.3* *. Stabilizers raised.4*.4* pt. outriggers down.4*.4*.9*.9* 7. 8.*. 6.3* * * 3. Stabilizers raised pt. outriggers down 9.* 9.* *..3* * Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 474-, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH 24 M Litronic Machine for Industrial Applications

6 Attachent GA H233 Operating Weight The operating weight includes basic achine with 4 point outriggers, hydr. cab elevation, 8 solid tyres plus interediate rings, industrial-type straight ono boo 6. and industrial-type angled stick with grapple odel GM 6/.6 3 sei-closed tines 24, kg Diensions H Undercarriage Stabilizers raised 2. 4 pt. outriggers down Stabilizers raised.6 6.9* 4.7.9*. 4 pt. outriggers down 6.9* 6.9*.9*.9* 9. Stabilizers raised pt. outriggers down 8.3* 8.3* 7.* 7.* 4.9* 4.9* 7. Stabilizers raised pt. outriggers down 9.* 9.* 7.6* 7.6*.7 6.* 4.* 4.* 6. Stabilizers raised pt. outriggers down 9.* 9.* 7.8* 7.8*.7 6.6* * * 4. Stabilizers raised * pt. outriggers down 2.4* 2.4*.*.* *.6 6.7* 4.2.6* * 3. Stabilizers raised * pt. outriggers down 9.4* 9.4*.6*.6* *.4 6.8* 4..* *. Stabilizers raised 2.4* 2.4* pt. outriggers down 2.4* 2.4*.6.8* *.2 6.7* 4..3* * Stabilizers raised 3.3* 3.3* pt. outriggers down 3.3* 3.3*.7*.7* 7. 8.*. 6.2* * *. Stabilizers raised pt. outriggers down 8.* 8.* 6.8* 6.8*..2* 3.9* 3.9* Stabilizers raised 3. 4 pt. outriggers down Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 474-, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. 6 LH 24 M Litronic Machine for Industrial Applications

7 Attachent GA H27 Operating Weight The operating weight includes basic achine with 4 point outriggers, hydr. cab elevation, 8 solid tyres plus interediate rings, industrial-type straight ono boo 6.6 and industrial-type angled stick.. with grapple odel GM 6/.6 3 sei-closed tines 24,3 kg Diensions H Undercarriage Stabilizers raised.8 6.2* 4.3.*.3 4 pt. outriggers down 6.2* 6.2*.*.*. Stabilizers raised pt. outriggers down 6.* 6.* 4.2* 4.2* 4.* 4.* 9. Stabilizers raised pt. outriggers down 6.7* 6.7*.8*.8* 3.7* 3.7* 3.6* 3.6* 7. Stabilizers raised pt. outriggers down 6.9* 6.9*.9 6.* 4.3.3* 3.4* 3.4* 6. Stabilizers raised pt. outriggers down 7.2* 7.2*.8 6.2* 4.3.3* * * 4. Stabilizers raised pt. outriggers down 9.3* 9.3* 7.7* 7.7*.6 6.4* 4.2.4* * * 3. Stabilizers raised pt. outriggers down 6.8* 6.8*.9*.9* *.4 6.6* 4..4* * *. Stabilizers raised 2.* 2.* pt. outriggers down 2.* 2.*.*.* *. 6.6* 3.9.3* * * Stabilizers raised 2.6* 2.6* pt. outriggers down 2.6* 2.6* 8.7* 8.7* *. 6.4* 3.8.* * *. Stabilizers raised pt. outriggers down 7.8* 7.8* * 4.8.7* * 3. 3.* 2.9* 2.9* 3. Stabilizers raised pt. outriggers down.8*.8* 4.* 4.* 3.7* 3.7* Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 474-, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH 24 M Litronic Machine for Industrial Applications 7

8 Attachent GK H28 Operating Weight The operating weight includes basic achine with 4 point outriggers, hydr. cab elevation, 8 solid tyres plus interediate rings, industrial-type straight ono boo 6. and industrial-type stick with tipping kineatics 4.. with sorting grab SG 2B/. 3 perforated shells Diensions 24,3 kg H Undercarriage Stabilizers raised 8.* 8.* 7.9* 7.9* 3. 4 pt. outriggers down 8.* 8.* 7.9* 7.9*. Stabilizers raised.6 7.4* pt. outriggers down 7.4* 7.4*.6*.6* 4.9* 4.9* 9. Stabilizers raised pt. outriggers down 7.* 7.*.3*.3* 4.* 4.* 7. Stabilizers raised pt. outriggers down 7.* 7.*.6 6.* 4. 4.* 3.8* 3.8* 6. Stabilizers raised.6 7.7* pt. outriggers down 7.7* 7.7* 7.2* 7.2*. 6.* 4..2* * 4. Stabilizers raised 6.3* 6.3* pt. outriggers down 6.3* 6.3* 9.* 9.* 7.6* 7.6*.4 6.3* 3.9.2* 3. 3.* 3. Stabilizers raised pt. outriggers down 6.7* 6.7*.8*.8* *. 6.4* 3.8.2* * *. Stabilizers raised.8*.8* pt. outriggers down.8*.8*.3*.3* * * 3.7.* * * Stabilizers raised 2.3* 2.3* pt. outriggers down 2.3* 2.3*.4*.4* * * * 2.9* 2.9*. Stabilizers raised pt. outriggers down 8.9* 8.9* * 4.7.* * 3.* 3.* Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 474-, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. 8 LH 24 M Litronic Machine for Industrial Applications

9 Attachent VK H76 Operating Weight The operating weight includes basic achine with 4 point outriggers, hydr. cab elevation, 8 solid tyres plus interediate rings, two-piece boo 3.8 and stick with tipping kineatics with sorting grab SG 2B/. 3 perforated shells 24, kg Diensions H Undercarriage Stabilizers raised.*.* pt. outriggers down.*.* 7. Stabilizers raised.8.8* * 6. 4 pt. outriggers down.8*.8* 3.7* 3.7* 6. Stabilizers raised.7.7* * pt. outriggers down.7*.7*.8*.8* 3.3* 3.3* 4. Stabilizers raised 7.9* 7.9*.6 7.3* pt. outriggers down 7.9* 7.9* 7.3* 7.3* 6.4* 6.4*.*.* 3.2* 3.2* 3. Stabilizers raised 9..9* * pt. outriggers down.9*.9* 9.3* 9.3* 7.* 7.*.6.8* 3.2* 3.2*. Stabilizers raised * pt. outriggers down 2.6* 2.6*.3*.3* 7.* 7.*..9* 3.3* 3.3* Stabilizers raised pt. outriggers down 4.9* 4.9*.4*.4* *.4.9* 3.6* 3.6*. Stabilizers raised pt. outriggers down 6.9* 6.9*.6*.6* * 4.4* 4.4* 4.* 4.* 3. Stabilizers raised pt. outriggers down 7.* 7.*.6*.6* 6.2* 6.2* 4.* 4.* 4. Stabilizers raised 8.3.* * pt. outriggers down.*.* 8.9* 8.9* Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values apply with the optiu positioning of the two-piece boo. Indicated loads coply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 474-, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH 24 M Litronic Machine for Industrial Applications 9

10 Variety of Tools Shells for Loose Material Shells for loose aterial with cutting edge (without teeth) Clashell odel GM B (direct attached, single-otor, single-piece, HD suspension) Cutting width of shells,,3,,,8 Capacity For loose aterial, specific weight up to t/ Weight kg,,3,9,2,44 Multiple Tine Grapples Grapple odel GM 64, 4 tines (direct attached, single-otor, HD suspension) open sei-closed closed Capacity Weight kg,,6,9,3,3, Grapple odel GM 6, tines (direct attached, single-otor, HD suspension) open sei-closed closed Capacity Weight kg,7,3,3,49,37,6 Sorting Grapple Grapple odel SG 2B (direct attached, bolt-on edge) ribbed perforated closed ribbed perforated closed Cutting width of shells 8 8 8,,, Capacity Max. closing force t Weight incl. adapter plate kg,23,7,2,32,24,8 Load Li Hook Load li hook for industrial stick (direct attached, HD suspension) Max. load t 2. Height with suspension 94 Weight kg 3 Magnet Devices/Liing Magnets Generator kw Electroagnets with suspension (direct attached) Power kw. 8.8 Diaeter of agnet,,2 Weight kg,2,4 LH 24 M Litronic Machine for Industrial Applications

11 Equipent Undercarriage Support rocker, variants + Individual control outriggers + Shuttle axle lock, autoatic Dozer blade + Outrigger onitoring syste + Tyres, variants + Protection for travel drive + Protection for piston rods, outriggers + Tool equipent, extended + Two lockable storage boxes Uppercarriage Refuelling syste with filling pup + Railing on uppercarriage + Generator + Main battery switch for electrical syste Protection for headlights + Protection for rear lights + Operator s Cab Fire extinguisher + Joystick steering + Cab elevation, hydraulic (LHC) + Cab elevation, rigid (LFC) + Autoatic air conditioning Electric cooler + LiDAT Plus (extended Liebherr data transfer syste) * Bullet proof glass + Positioning swing brake + Proportional control + Radio Cofort (control via display) + Preparation for radio installation Back-up alar (acoustic signal is eitted traveling backward, can not be switched off) + Warning beacon on cab + Windscreen wiper, roof + Top guard + Front guard + Auxiliary heating, adjustable (week tie switch) + Flashing light (xenon) + Electronic iobilizer + Hydraulic Syste Electronic pup regulation Liebherr hydraulic oil fro 2 C to + 4 C Liebherr hydraulic oil, biologically degradable + Magnetic rod in hydraulic tank Bypass filter + Preheating hydraulic oil + Engine Fuel anti-the device + Radiator, large-esh, for dust-intensive operation + Liebherr particle filter + Reversible fan drive, fully autoatic + Air pre-filter with dust discharge + Protective grid in front of cooler intake Preheating fuel + Preheating coolant + Preheating engine oil + Attachent Boo lights, 2 pieces, halogen Boo lights, 2 pieces, LED + Stick lights, 2 pieces, halogen Stick lights, 2 pieces, LED, with protection + Boo shutoff, ascending + AutoLi + Height liitation and stick shutoff, electronically + Boo cylinder cushioning + Industrial stick with quick coupling + Stick caera (with separate onitor), botto side, with protection + Liebherr ulti coupling syste + Liebherr quick coupler, hydraulic or echanical + Pipe fracture safety valves hoist cylinders Pipe fracture safety valve stick cylinder Quick coupling syste LIKUFIX + Quick coupling syste MH4 + Protection for piston rod, hoist cylinder + Overload warning device + Protection for stick + Operator s Cab Cab lights rear, halogen + Cab lights rear, LED + Cab lights front, halogen Cab lights front, LED + Operator s seat Standard Operator s seat Cofort + Operator s seat Preiu + Driving alar (acoustic signal is eitted during travel, can be switched ON/OFF) + Coplete Machine Lubrication Lubrication undercarriage, anually decentralized (grease points) Central lubrication syste for uppercarriage and attachent, autoatically Central lubrication syste for undercarriage, autoatically + Special coating, variants + Monitoring Rear view onitoring with caera Side view onitoring with caera + = Standard, + = Option * = optionally extendable aer one year Options and/or special attachents, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty. LH 24 M Litronic Machine for Industrial Applications

12 The Liebherr Group of Copanies Wide Product Range The Liebherr Group is one of the largest construction equipent anufacturers in the world. Liebherr s high-value products and services enjoy a high reputation in any other fields. The wide range includes doestic appliances, aerospace and transportation systes, achine tools and aritie cranes. Exceptional Custoer Benefit Every product line provides a coplete range of odels in any different versions. With both their technical excellence and acknowledged quality, Liebherr products offer a axiu of custoer benefits in practical application. State-of-the-art Technology To provide consistent, top quality products, Liebherr attaches great iportance to each product area, its coponents and core technologies. Iportant odules and coponents are developed and anufactured in-house, for instance the entire drive and control technology for construction equipent. Worldwide and Independent Hans Liebherr founded the Liebherr faily copany in 949. Since that tie, the enterprise has steadily grown to a group of ore than 3 copanies with over 39, eployees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr faily is the sole owner of the copany. Printed in Gerany by Typodruck RG-BK-RP LHB/VF _enGB All illustrations and data ay differ fro standard equipent. Subject to change without notice. Liebherr-Hydraulikbagger GbH Liebherrstraße 2, D-8847 Kirchdorf/Iller S , Fax info.lhb@liebherr.co