Wheeled Excavator A 918 Compact. Operating Weight: 17,500 19,600 kg Engine: 115 kw / 156 HP Stage IV Bucket Capacity: m³

Transcription

1 Wheeled Excavator A 98 Copact Operating Weight: 7, 9,6 kg Engine: kw / 6 HP Stage I Bucket Capacit:.7. ³

2 A 98 Copact Litronic Operating Weight: 7, 9,6 kg Engine: kw / 6 HP Stage I Bucket Capacit:.7. ³ A 98 Copact Litronic Perforance Copact, flexible Perfect cobination for axiu perforance

3 Econo Reliabilit Cofort Maintainabilit A sound investent Optiu econo and environentall friendl Copetence, consistenc, innovation Proven experience Ergonoic excellence Superior cabin design for operator cofort and wellbeing Service ever step of the wa Siple, fast and reliable A 98 Copact Litronic

4 Perforance Copact, flexible Perfect cobination for axiu perforance Liebherr copact wheeled excavators are used on building sites all over the world, where the ebod force and speed cobined with copact diensions. Using the, achine operators achieve ipressive levels of perforance, da in and da out. Whether on inner cit building sites, in roadwa construction, classic earthoving or for digging trenches and laing pipes, ore can be achieved faster with Liebherr copact wheeled excavators. 4 A 98 Copact Litronic

5 Lifting ore The intelligent structure of the uppercarriage and the separate ounting of the hoist clinders perit a superior lift capacit and this with a tail swing radius of onl. As a result, the A 98 Copact Litronic cobines the flexible application possibilities of a copact wheeled excavator with the perforance of a standard wheeled excavator. Perforance and flexibilit for ever building site. Being faster The A 98 Copact Litronic enables a high working speed, even when oveents of attachent are perfored in parallel. Excavating, backfilling and profiling tasks can be copleted faster, new tasks can be started sooner. The speed of the achine can b adjusted easil using the MODE switch for load lifting work or grading work. Working with Precision The standard josticks with proportional controls and also the extraordinar sensitivit of the hdraulic sste enable precision work at high speeds and parallel oveents. This eans the achine operator can carr out the ost challenging tasks in a short tie, not onl at reduced speed but also with axiu perforance output fro the achine. Jostick with Proportional Control Good functionalit with strealined, ergonoic design 4-wa ini-jostick enables versatile possibilities of control without having to encopass, for exaple steering, outriggers or working tools Two buttons and a rocker switch also increase the nuber of functions Jostick Steering With the optional jostick steering, the driver can steer the wheeled excavator proportionall using the ini jostick. In this wa, working and driving oveents can be perfored at the sae tie without having to change controls. More efficient operation for even greater productivit. Autoatic Digging Brake The autoatic digging brake ensures that anual actuation of the brake pedal is no longer required, thus leading to easier operation of the achine. When the accelerator pedal is in a neutral position and the achine is stationar, the digging brake engages autoaticall. This results in faster work processes and enhanced safet for an and achine, particularl during operation with frequent relocation of the excavator. Furtherore, the autoatic digging brake can be linked with the autoatic swing axle lock. When the achine is deploed and working, the swing axle locks autoaticall and thereb provides optiu stabilit. Digging Force High digging and breakout force in the field Continuousl high digging perforance even in tough ground More digging force for faster results Liebherr Tres Twin tres without interediate ring with offset lugs Increased stabilit during work and less vibration when driving thanks to higher tre inflation pressure Better self-cleaning properties even after a few etres prevents soiling of the track surface Larger contact area for less ground pressure and higher traction on soft ground A 98 Copact Litronic

6 Econo A sound investent Optiu econo and environentall friendl Liebherr copact wheeled excavators are achines that cobine high productivit and copact flexibilit with excellent levels of econo and all this coes as standard fro the factor. On request, the efficienc of each wheeled excavator can be boosted further with a Liebherr productive bucket, a fuel-saving Liebherr hdraulic oil or a Liebherr quick coupling sste, all of which provide ore return fro each operating hour. 6 A 98 Copact Litronic

7 Fuel Efficienc and Exhaust Gas Aftertreatent The Liebherr D94 diesel engine helps to preserve the environent and its resources with low fuel consuption and reduced eissions. For eission stage I, Liebherr relies copletel on an innovative SCR sste fro Liebherr, consisting of an SCR cataltic converter sste and other coponents, such as injector and AdBlue suppl, which enable a 9 percent reduction of nitrogen oxide (NOX). The sste reduces exhaust eissions without an coproise in perforance. Efficient Manageent LiDAT, Liebherr s own data transission and positioning sste, facilitates efficient anageent, onitoring and control of the entire fleet in ters of achiner data recording, data analsis, fleet anageent and service. All of the iportant achiner data can be viewed at an tie on a web browser. LiDAT provides ou coprehensive work deploent docuentation, greater availabilit thanks to shorter ties, faster support fro the anufacturer, quicker detection of strain / overload and subsequentl a longer service life of the achine as well as greater planning efficienc. Max LPE Max Output [kw] Specific fuel consuption [g/kwh] Engine Idling and Engine Shut- The standard autoatic idling function reduces the engine speed to idle as soon as the operator takes his hand fro the jostick so that no hdraulic function is activated. Proxiit sensors in the jostick levers restore the original engine speed as soon as the operator s hand is oved towards the lever again. This ensures that the set engine speed is available iediatel. The result is a cobination of fuel saving and reduced noise levels. Operating costs can be reduced even further with the optional autoatic engine shut- function. Liebherr Working Tools and LIKUFIX To boost the productivit of its construction achines, Liebherr offers a broad range of working tools for different fields of application. Furtherore, the hdraulic excavators can also be equipped with the Liebherr LIKUFIX hdraulic quick coupling sste. The cobination of a hdraulic Liebherr quick coupling sste with the LIKUFIX coupling block perits fast safe changing of echanical and hdraulic working tools fro the operator s cabin. This boosts productivit on average b %. Min Working range Engine speed [rp] Perfect operating point with LPE Operating point without LPE Travel Drive High tractive force for fast acceleration on level ground and high end speed on gradients Reduces unproductive travel tie between tasks and on the building site Faster on site More productive Output Specific fuel consuption Low Fuel Consuption Thanks to Intelligent Machine Control Liebherr-Power Efficienc (LPE) optiises the interaction of the drive coponents in ters of efficienc LPE enables achine operation in the area of the lowest specific fuel use for less consuption and greater efficienc with the sae perforance Liebherr Quick Coupling Sste LIKUFIX Faster and safer changing of echanical and hdraulic working tools fro the operator s cabin Machine utilization increased to up to 9 % thanks to extended deploent options isual and acoustic check of correct locking position of tool at quick coupling sste b two proxiit sensors A 98 Copact Litronic 7

8 Reliabilit Copetence, consistenc, innovation Proven experience Reliabilit offers safet. Safet that significantl influences the success of a project. Whatever the weather, Liebherr stands for safet with reliable construction achines and custoeroriented sales and service partners. This eans a Liebherr construction achine is exactl what it should be: an investent that pas off. 8 A 98 Copact Litronic

9 Qualit and Copetence Our experience, understanding of custoer needs and the technical ipleentation of these findings guarantee the success of the product. For decades, Liebherr has been inspirational with its extensive production and sste solutions. Ke coponents such as the diesel engine, electronic coponents, slewing ring, swivelling drive and hdraulic clinders are developed and produced b Liebherr itself. The great depth of in-house anufacturing guarantees axiu qualit and ensures that coponents are optiall configured to each other. Safet Besides the perforance and efficienc of a wheeled excavator, the safet of the operator and the achine ust alwas be paraount. Nuerous equipent features such as the standard pipe break protection on the lifting and stick clinders, electronic height liitation, overload warning sste, lainated safet glass sashing-resistant, rollover protection sste (ROPS) and an eergenc exit through the rear window provide axiu safet in all operations. QPDM Qualit and Process Data Manageent QPDM allows production data to be logged, docuented and evaluated Autoation of docuentation and test specifications Abilit to handle large quantities and aintain unifor high qualit Driving Oscillation Daper The driving oscillation daper assivel reduces vibrations in the whole achine that can occur when driving a wheeled excavator. This is ainl advantageous during longer journes, not onl onroad but also offroad. The driving oscillation dapers coprise pressure accuulators that act as shock absorbers on the lift clinders to ensure that vibrations fro the equipent are not transferred to the uppercarriage. The daping function reduces the echanical load on the steel structure, which in turn results in a longer service life of the coponents. The soother driving response gives the driver a faster, ore cofortable and thereb ore efficient driving experience. Excellent All-round ision The large areas of glass and the rear and side area onitoring sstes provide the operator with an excellent view of his working area and the zone around the achine. This perfect view enhances the operator s safet and ensures that in turn he can handle the achine safel at all ties. Less is More Extended range of possible applications due to a short tail swing radius of onl Greater safet for an and achine Liebherr copact wheeled excavators: short and safe Bright and Durable Nuerous work laps light up the working area perfectl and, in doing so, provide better visibilit and even greater safet for an and achine The standard LED tail lights are not just nice looking but also have high luinosit and an extreel long service life A 98 Copact Litronic 9

10 Cofort Ergonoic excellence Superior cabin design for operator cofort and wellbeing The odern Liebherr operator s cab is the largest in this achine class, and offers the best conditions for health, focussed and productive working. Standard features include an airsprung operator seat with seat heating, autoatic air conditioning and the ergonoicall arranged control eleents with touchscreen indicating unit. An exaple of the extensive safet equipent is the roll-over protection sste (ROPS) for the cab fitted as standard according to ISO 7- as well as the standard windows ade fro ipact-resistant lainated safet glass. A 98 Copact Litronic

11 Autoatic Air Conditioning The autoatic air conditioning offers convincingl intuitive operation. Teperature, blower setting and the various air nozzles in the head, chest and foot areas are set using the touch screen on the indicating unit. The defrost / defog onebutton function clears fogged up windows in the shortest possible tie. The filter for the cab air can be changed easil and convenientl fro the outside. Operator Seats The Standard, Cofort and Preiu operator seat versions available have recognized orthopedic properties, and offer sitting cofort at the highest level. Even the standard operator seat offers an extensive range of features such as air suspension, seat heating, headrest, lubar support and an ore. Radio with Hands-free Device The radio can be equipped with an MP-copatible USB slot and integrated hands-free device, which eans that calls can even be taken while working with the achine. Operation of the radio is b eans of the touchscreen colour displa. Station search, volue control and ute can be controlled with ease. Siple operation for greater cofort. Refuelling Using the optional refuelling pup, the achine can be refuelled directl fro a fuel container The tank hose integrated in the service door and the autoatic shut-off when the tank is full offer greater convenience and short replenishent ties Topping up siple, quick and safe Mirror Sste The exterior irrors are available as an option and can be adjusted electricall without trouble fro the cab. The exterior irrors are heated at the press of a button. In this wa, the exterior irrors are quickl cleared of condensation or ice during periods of high air huidit and frost. This ensures a clear view over the working area and saves tie. Low Noise Levels The use of viscoelastic ounts, good insulation and low-noise diesel engines fro Liebherr iniises noise eissions and vibrations. The noise levels are just 7 db(a) in the operator s cab and db(a) outside. Detailed Solutions The A 98 Copact Litronic offers nuerous detailed solutions for greater cofort and efficienc. For exaple, a choice of steering wheel: for regular civil engineering tasks, the thin steering wheel is recoended as it affords better visibilit of the working area. The stabilizer blade does not have an lubrication points and is aintenance-free no need for tieconsuing lubrication. Maxiu Safet More convenient and safer entr and exit in and out of the cab thanks to added width fro the folding ar console Three entr steps with standard anti-slip galvanised plates provide a boost to safet Intuitive Operation Displa of the achine data and caera iage on the 7-inch indicating unit with touch screen and direct access via enu bar user-prograable eor slots for working tools, which can be used for quickl and easil setting the oil pressure and oil flow at the push of a button when changing tools Rear and side area onitoring provide optiu visibilit of the working area at all ties A 98 Copact Litronic

12 Maintainabilit Service ever step of the wa Siple, fast and reliable Liebherr copact wheeled excavators are not onl powerful, robust, precise and efficient, the also ipress with the service-orientated achine design. Maintenance is perfored quickl, sipl and safel. This reduces aintenance costs and keeps achine ties to a iniu. A 98 Copact Litronic

13 Service-based Machine Design The service-based achine design guarantees short servicing ties, thus iniising aintenance costs due to the tie it saves. All the aintenance points are easil accessible fro the ground and eas to reach due to the large, wide-opening service doors. The enhanced service concept places the aintenance points close to each other and reduces their nuber to a iniu. This eans that service work can be copleted even ore quickl and efficientl. Hdraulic Oils with Added alue Liebherr hdraulic oils achieve a service life of 6, operating hours plus. Instead of having defined change intervals, the results of the oil analsis (ever, operating hours or after one ear) deterine when the oil needs to be changed. The unique Liebherr Hdraulic Plus oil can even achieve a service life of 8, operating hours plus at the sae tie reducing fuel consuption b up to %. Lubricating During Work Full autoatic central lubrication sste for the attachent and swing ring Can be optionall expanded to the connecting link and quick coupler Lubricating without interrupting work for higher productivit Maintenance without Draining the Oil A cut-off valve isolating the oil reservoir fro the hdraulic sste is fitted as standard. This allows siple aintenance work to be perfored on the hdraulic coponents without having to drain off the hdraulic fluid. Reduced aintenance tie for greater achine availabilit. Reanufacturing The Liebherr reanufacturing progra offers cost-effective reconditioning of coponents to the highest qualit standards. arious reconditioning levels available including replaceent coponents and general overhaul or repair. The custoer receives coponents with original part qualit at a reduced cost. Copetent Advice and Service Copetent advice is a given at Liebherr. Experienced specialist provide advice for our specific requireents: applicationoriented sales support, service agreeents, cost effective repair alternatives, original parts anageent, as well as reote data transission for achine planning and fleet anageent. Excellent Service Access Large, wide-opening service doors Engine oil, fuel, air and cab air filters are easil and safel accessible fro the ground The oil level in the hdraulic tank can be checked fro the cab Short service ties for ore productivit Rapid Spare Parts Service 4-hour deliver: Spare parts service is available for our dealers around the clock Electronic spare parts catalogue: Fast and reliable selection and ordering via the Liebherr online portal With online tracking, the current processing status of our order can be viewed at an tie A 98 Copact Litronic

14 Wheeled Excavator A 98 Copact Litronic Overview Superbl Designed Attachent for Maxiu Reliabilit arious boo versions and stick lengths Liebherr hdraulic clinders Pipe fracture safet valves hoisting and stick clinders Overload warning device Driving oscillation daper (optional) Liebherr quick coupling sstes (optional) Wide selection of Liebherr working tools (optional) Elaborate Maintenance Concept for Maxiu Productivit Full autoatic central lubrication sste for uppercarriage and attachent Large, wide-opening service doors Central aintenance points accessible fro the ground Hdraulic shut-off cock Cab air filter can be replaced quickl and convenientl fro outside 4 A 98 Copact Litronic

15 Ergonoic Operator s Work Station for Maxiu Cofort Operator s seat Cofort or Preiu (optional) Autoatic air-conditioning sste 7" high resolution colour displa with touchscreen operation Resonant ar console and ergonoic josticks Folding ar console, left Proportional control with 4-wa ini-jostick Jostick steering (optional) Large windows Protective grille at top and botto, adjustable (optional) Convenient radio operation with hands-free device Tool Control for working tools LED headlights (optional) Rear and side onitor Superior technolog for highest econo Liebherr diesel engine copliant with stage I Eissions treatent with Liebherr-SCR technolog Liebherr-Power-Efficienc (LPE) Load-sensing-control MODE selection (Sensitive, ECO, Power, Power-Plus) Sensor-controlled autoatic idling sste Perfect cobination for highest possible perforance Short tail swing radius arious support versions, welded on Travel drive integrated in undercarriage Autoatic working brake Liebherr tres without interediate ring A 98 Copact Litronic

16 Technical Data Diesel Engine Rating per ISO 949 Model Tpe Bore / Stroke Displaceent Engine operation Air cleaner Engine idling Electrical sste oltage Batteries Alternator Stage I Harful eissions values Eission control Option Fuel tank Urea tank Hdraulic pup for attachent and travel drive Max. flow Max. pressure Hdraulic pup regulation and control 4 x Ah / three-phase current 8 / 4 A MODE selection in accordance with 97/68/EG stage I Liebherr-SCR technolog Liebherr particle filter l 46 l Cooling Sste Diesel engine Hdraulic Sste kw (6 HP) at,8 RPM Liebherr D94 4 clinder in-line 4 / l 4-stroke diesel Coon-Rail turbo-charged and after-cooler reduced eissions dr-tpe air cleaner with pre-cleaner, priar and safet eleents sensor controlled Hdraulic tank Hdraulic sste Hdraulic oil filter S (Sensitive) E (Eco) P (Power) Engine speed and perforance setting Option water-cooled copact cooling sste consisting cooling unit for water, hdraulic oil and charge air with stepless therostaticall controlled fan, fans for radiator cleaning, can be copletel folded awa Swing ring Hdraulic Controls Servo circuit Attachent and swing Chassis Additional functions Proportional control 6 A 98 Copact Litronic via control valves with integrated safet valves, siultaneous and independent actuation of chassis, swing drive and attachent with hdraulic pilot control and proportional jostick levers electroproportional via foot pedal via switch or electroproportional foot pedals proportionall acting transitters on the josticks for additional hdraulic functions l/in. bar Liebherr-Snchron-Cofort-sste (LSC) with electronic engine speed sensing regulation, pressure and flow copensation, torque controlled swing drive priorit l ax. l ain return filter with integrated partial icro filtration ( µ) adjustent of engine and hdraulic perforance via a ode pre-selector to atch application, e.g. for especiall econoical and environentall friendl operation or for axiu digging perforance and heav-dut jobs ode for precision work and lifting through ver sensitive oveents ode for especiall econoical and environentall friendl operation ode for high perforance with low fuel consuption stepless alignent of engine output and hdraulic power via engine speed Tool Control: ten preadjustable pup flows and pressures for add on tools Swing Drive Drive Power distribution Liebherr axial piston variable displaceent pup Swing speed Swing torque Holding brake Option Liebherr axial piston otor with integrated brake valve and torque control Liebherr, sealed race ball bearing swing ring, internal teeth. RPM stepless kn wet ulti-disc (spring applied, pressure released) pedal controlled positioning swing brake

17 Operator s Cab Cab Operator s seat Standard Operator s seat Cofort (Option) Operator s seat Preiu (Option) Control sste Operation and displas Air-conditioning ROPS safet cab structure (roll-over protection sste) with individual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a sliding window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddaping insulating, tinted lainated safet glass, separate window shades for the sunroof window and windscreen air cushioned operator s seat with D-adjustable arrests, headrest, lap belt, seat heater, anual weight adjustent, adjustable seat cushion inclination and length and echanical lubar vertebrae support in addition to operator s seat standard: lockable horizontal suspension, autoatic weight adjustent, adjustable suspension stiffness, pneuatic lubar vertebrae support and passive seat cliatisation with active coal in addition to operator s seat cofort: active electronic weight adjustent (autoatic readjustent), pneuatic low frequenc suspension and active seat cliatisation with active coal and ventilator josticks with ar consoles and swivel seat, folding left ar console large high-resolution operating unit, selfexplanator, colour displa with touchscreen, video-copatible, nuerous setting, control and onitoring options, e.g. air conditioning control, fuel consuption, achine and tool paraeters autoatic air-conditioning, recirculated air function, fast de-icing and deisting at the press of a button, air vents can be operated via a enu; recirculated air and fresh air filters can be easil replaced and are accessible fro the outside; heating-cooling unit, designed for extree outside teperatures, sensors for solar radiation, inside and outside teperatures (countr-dependent) Drive Pulling force Travel speed Driving operation Axles Service brake Autoatic digging brake Holding brake Stabilization Option oversized two speed power shift transission with additional creeper speed, Liebherr axial piston otor with functional brake valve on both sides 7 kn. k/h stepless (creeper speed off-road) 7. k/h stepless (off-road) k/h stepless (creeper speed on-road). k/h stepless (road travel) ax.. or. k/h Speeder (Option) autootive driving using accelerator pedal, cruise control function: storage of variable accelerator pedal positions, both off-road and on-road anual or autoatic hdraulicall controlled front axle oscillation lock two circuit travel brake sste with accuulator; wet and backlash-free disc brake works autoaticall when driving off (accelerator pedal actuation) and when the achine is stationar (engageent); the digging brake engages autoaticall can be coupled with autoatic swing axle lock wet ulti-disc (spring applied, pressure released) stabilizing blade (adjustable during travel for dozing) stabilizing blade front point outriggers rear -undercarriage / 9' Attachent Tpe Hdraulic clinders Bearings high-strength steel plates at highlstressed points for the toughest requireents. Coplex and stable ountings of attachent and clinders Liebherr clinders with special seal sste as well as shock absorption sealed, low aintenance Coplete Machine Lubrication Noise eission ISO 696 /4/EC Liebherr central lubrication sste for uppercarriage and attachent, autoaticall L pa (inside cab) = 7 db(a) LWA (surround noise) = db(a) A 98 Copact Litronic 7

18 Diensions D E A 98 C W H K I M M L T U Q J H96 B = B B* = B* X 98 J I H97 T M M L U 8 A 98 Copact Litronic T B = B B* = B* B

19 ,,,7,69,,7,6,8,8, ,,4,,44,47,, 4,7 4,74 A B B* B B B* C D E H I I J J K L M M Q T T T U U * - E = Tail radius Tres.- G Stick Two-piece boo. Stabilizer Blade blade pt. outriggers,9,7,6,,4,7* W,9,9,,,,* X 8, 8, 8, 8, 8, 8,6* Mono boo. Stabilizer Blade blade pt. outriggers,,,,*,*,*,,,,*,*,* 8, 8, 8, 8,6* 8,* 8,6* Stick Offset two-piece boo. Offset ono boo 4.9 Stabilizer Blade Stabilizer Blade blade pt. blade pt. outriggers outriggers 6, 6,,7,,8,7,4,6*,*,4* W,,,,,,,,*,*,* X 8, 8, 8, 8, 8, 8, 8, 8,* 8,* 8,* Diensions are with attachent over steering axle * Attachent over digging axle for shorter transport diensions E F Boo 98 H97 Two-piece boo Two-piece boo Two-piece boo Stick F 7, 7, 7, G,,, E,8,8,8 A 98 Copact Litronic 9

20 Backhoe Bucket with Two-Piece Boo. ft Digging Envelope H97 with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height Min. attachent radius Digging Forces 4 without quick coupler Max. digging force (ISO 6) Max. breakout force with ripper bucket The operating weight includes the basic achine with 8 tres plus interediate rings, t wo-piece boo., stick, quick coupler SW and bucket 8 / versions A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers kn ( t) Operating Weight - - kn t kn t Max. breakout force (ISO 6) Weight (kg) 7,7 8,6 7,8 8,7 ft pt. outriggers Weight Stabilizers raised Capacit ISO 74) Cutting width Buckets Machine stabilit per ISO 67* (7 % of tipping capacit) Stabilizers raised pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg ). 9 6).4 8).6 4,).8 48,).9 ). 6).4 6 8).6 4,).8,).9 4). 8 64).4 84).6 8,4).8 46,4). * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) coparable with SAE (heaped) ) Bucket with teeth ) Bucket with teeth in HD-version 4) Bucket with cutting edge (also available in HD-version) Buckets with cutting width with liited digging depth Max. aterial weight = t/, = t/, =. t/, = not authorised A 98 Copact Litronic

21 Lift Capacities with Two-Piece Boo. Stick Stick 8..* * *.*.*.8*.8*.8*.4*.4*.4* 4.8.6* 4.7 * *.4*.4*.6*.6*.6* * * * 6. 7.* 7.* 7.4* 7.4* * * * *.. * * * * * * * * 9.7* 9.7*.7*.7*.7*.4*.4*.4* * 7.4* 6. * * *.* 4.. * * * * *.*.* * *. * * * * Stick Height 8. 9.* * * 9.* 9.* 9.*.*.*.* 7.7* 7.7* 7.7* * 7.* 7.4* 7.4* * 7.4* Can be slewed through 6 4.9* 4.9* 4... * *.7*.7* In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European Standard EN 474-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 98 Copact Litronic

22 Lift Capacities with Two-Piece Boo. - Stick Stick * * *.*.*.8*.8*.8*.4*.4*.4* * 4.6. * *.4*.4*.6*.6*.6* * * * 7.* 7.* 7.4* 7.4* * * * * * * * * * * * * 9.7* 9.7*.7*.7*.7*.4*.4*.4* * 7.4* * * *.* 4. *. * * * *.*.* * * *... * * * * Stick Height * * * 7.7* 9.* 9.* 9.*.*.*.* 7.7* 7.7* 7.7* * 7.* 7.4* 7.4* 7.4* 7.4* Can be slewed through 6 4.9* 4.9*... * *.7*.7* In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European Standard EN 474-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 98 Copact Litronic

23 Backhoe Bucket with Mono Boo. ft Digging Envelope H964 with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height Min. attachent radius Digging Forces 4 without quick coupler Max. digging force (ISO 6) Max. breakout force (ISO 6) Max. breakout force with ripper bucket - The operating weight includes the basic achine with 8 tres plus interediate rings, ono boo., stick, quick coupler SW and bucket 8 / versions A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers Operating Weight kn t kn t....7 kn ( t) Weight (kg) 7,4 8, 7, 8,4 ft pt. outriggers Weight Stabilizers raised Capacit ISO 74) Cutting width Buckets Machine stabilit per ISO 67* (7 % of tipping capacit) Stabilizers raised pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg ). 9 6).4 8).6 4,).8 48,).9 ). 6).4 6 8).6 4,).8,).9 4). 8 64).4 84).6 8,4).8 46,4). * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) coparable with SAE (heaped) ) Bucket with teeth ) Bucket with teeth in HD-version 4) Bucket with cutting edge (also available in HD-version) Buckets with cutting width with liited digging depth Max. aterial weight = t/, = t/, =. t/, = not authorised A 98 Copact Litronic

24 Lift Capacities with Mono Boo. Stick Stick * * 8.7* 8.7* 6.* 6.* 6.* 6.* 6.*.8 7.* * 7.* 7.*.8.* 6.7.*.*.*.9 8.9* * 8.9* 8.9* * * *.7* * * *.7*.7*.7* 6. 7.* 7.* *. * * * * * * * 8.* 8.* 8.* 7.* 7.* 7.* 9.7* 9.7* 9.7* 9.* 9.* 9.* * * *.7*.7*.7*.* * * *.7*.7*.7*.*.*.* 6. * *.9 7.* 7.* * * 4..*.* Stick Height * * * 8.* 8.* 8.* 9.4* 9.4* 9.4* 9.4* 9.4* 9.4* * 6.* * 6.* * * * Can be slewed through 6 * * * * * * * 4.9* *.4 * * * *.7 * * * In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European Standard EN 474-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. 4 A 98 Copact Litronic

25 Lift Capacities with Mono Boo. - Stick Stick * 8.7* 8.7* 8.7* 8.7* 6.* 6.* 6.* 6.* 6.* 6.* 7.* 7.* 7.* 7.* 7.*.* 7.7.*.*.* * * 8.9* 8.9* * * * 4.8.7* * * *.7*.7*.7* 7.* 7.* *. 4.7 * * * * 8.* * 7.* * * 8.* 8.* 8.* 7.* 7.* 7.* 9.7* 9.7* 9.7* 9.* 9.* 9.* * * *.7*.7*.7* 4.8.* * * * *.7*.7*.7*.*.*.* * * 7.* 7.* * * *.*.* Stick Height 7. 8.* 8.* * * 8.* 8.* 8.* 9.4* 9.4* 9.4* 9.4* 9.4* 9.4* * * 6.* * 6.* * * *. *. Can be slewed through 6 * * * * * * 4.9* 4.9*... * * * * * * * * In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European Standard EN 474-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 98 Copact Litronic

26 Backhoe Bucket with Offset Two-Piece Boo. ft Digging Envelope H978 with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height Min. attachent radius with stick with stick at ax. attachent offset with vertical ditch walls with stick 4 with stick with set straight boo 98 Digging Forces without quick coupler Max. digging force (ISO 6) kn 8. 7 t kn t...7 kn ( t) Max. breakout force (ISO 6) - - Max. breakout force with ripper bucket Operating Weight 4 The operating weight includes the basic achine with 8 tres plus interediate rings, offset two-piece boo., stick, quick coupler SW and bucket 8 /.6. ft R 8 - versions A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers Weight (kg) 8, 9, 8,4 9, 9 pt. outriggers Weight Stabilizers raised Capacit ISO 74) Cutting width Buckets Machine stabilit per ISO 67* (7 % of tipping capacit) Stabilizers raised pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg 6).4 8).6 4,).8 48,).9 6).4 6 8).6 4,).8,).9 64).4 84).6 8,4).8 46,4). * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) coparable with SAE (heaped) ) Bucket with teeth ) Bucket with teeth in HD-version 4) Bucket with cutting edge (also available in HD-version) Max. aterial weight = t/, = t/, =. t/, = not authorised 6 A 98 Copact Litronic

27 Lift Capacities with Offset Two-Piece Boo. Stick Stick Height * * * 7.6.* * 9.* 9.* 9.*.*.*.*.*.*.*.*.*.*.4*.4*.4* * 7.* Can be slewed through 6 * *.*.* 4..*.* * * * * In longitudinal position of undercarriage * * * 7.6.* 7. 9.* 9.* 9.*.*.*.*.9*.9*.9*.*.*.* Max. reach 4.7 * * * * * 6.7* 6.9* 6.9* 4...*.* * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European Standard EN 474-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 98 Copact Litronic 7

28 Lift Capacities with Offset Two-Piece Boo. - Stick Stick Height * * * 8.6.* * 9.* 9.* 9.*.*.*.*.*.*.*.*.*.*.4*.4*.4* * 6.9* 7.* 7.*. *.. Can be slewed through 6 * * 4..*.* * * * * In longitudinal position of undercarriage * * * 8.6.* * 9.* 9.*.*.*.*.9*.9*.9*.*.*.* Max. reach * * * * 6.9* 6.9*....*.* * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European Standard EN 474-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. 8 A 98 Copact Litronic

29 Backhoe Bucket with Offset Mono Boo 4.9 ft Digging Envelope H967 with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height Min. attachent radius with stick with stick with stick at ax. attachent offset with vertical ditch walls with stick with stick 6 with stick with set straight boo without quick coupler Max. digging force (ISO 6) 4 6 kn t kn t....7 kn ( t) Max. breakout force (ISO 6) Digging Forces Max. breakout force with ripper bucket 6 Operating Weight ft The operating weight includes the basic achine with 8 tres plus interediate rings, offset ono boo 4.9, stick, quick coupler SW and bucket 8 /.6. R 8 versions A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers 7 7 Weight (kg) 7,8 8,7 7,9 8,8 9 pt. outriggers Weight Stabilizers raised Capacit ISO 74) Cutting width Buckets Machine stabilit per ISO 67* (7 % of tipping capacit) Stabilizers raised pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg 6).4 8).6 4,).8 48,).9 6).4 6 8).6 4,).8,).9 64).4 84).6 8,4).8 46,4). * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) coparable with SAE (heaped) ) Bucket with teeth ) Bucket with teeth in HD-version 4) Bucket with cutting edge (also available in HD-version) Max. aterial weight = t/, = t/, =. t/, = not authorised A 98 Copact Litronic 9

30 Lift Capacities with Offset Mono Boo 4.9 Stick Stick.9*.9*.9* * *.4 9.8* *.9*.9*.9* 8.7* 8.7* 8.7* 8.* 8.* 8.* 9.8* 9.8* 9.8* 7.8* 7.8* 7.8* * *.8*.8*.8* 6.7* 6.7*.7.6.*.*.* *..*.*.7 4.9* 4.9* * * *..*.* * * 8.* 8.*.7 8.7* 8.7* 8.7* 8.7*. 8.* 6. 8.* 8.* 8.*..* 6..*.*.*. 8.* 8.* 8.* 8.*.7.6* *.6*.6*.6* 6. * *.7 7.* 7.*.6.7.7*.7* 4... * * 4.9* 4.9* * 4.9* Stick Height * 7.8* 7.8* 7.8* 7.8*.8 9.9* * 9.9* 9.9*. 8.* 6. 8.* 8.* 8.*..* 6..*.*.*.4 8.* 8.* 8.* 8.* * * * * * * * 7.*.6.6.9*.9* * 4.. Can be slewed through 6 * * *.7.6.*.* In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European Standard EN 474-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 98 Copact Litronic

31 Lift Capacities with Offset Mono Boo Stick Stick.9*.9*.9* * 8.7* * * 7.8*.9*.9*.9* 8.7* 8.7* 8.7* 8.* 8.* 8.* 9.8* 9.8* 9.8* 7.8* 7.8* 7.8* * *.8*.8*.8* * 6.7*.8.7.*.*.*. 4.. *.*..*.*.7 4.9* 4.9* * * *.4.*.* * 8.* 8.* 8.* 8.* 8.7* * 8.7* 8.7* 6. 8.* 7. 8.* 8.* 8.* 6..* 7..*.*.* 8.* * 8.* 8.* 4.7.6*.7 * *.6*.6*.6* 6. * *.8 7.* 7.*.6.7.7*.7*. 4. * * 4.9* 4.9*.7 4.9* 4.9* Stick Height 7.8* 7.8* 7.8* 7.8* 7.8* 7.8* * * 9.9* 9.9* 6. 8.* 7. 8.* 8.* 8.* 6..* 7..*.*.* 6. 8.* 7. 8.* 8.* 8.* * * * * * * * * 7.*.6.7.9*.9*. * 4. Can be slewed through 6 * * *.7.*.* In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to kg. In accordance with the haronised European Standard EN 474-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 98 Copact Litronic

32 Clashell Grab with Two-Piece Boo. ft Digging Envelope H96 with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Clashell Grab Model GM B 6 Max. tooth force Max. torque of hdr. swivel 7 kn (7.4 t) 6 kn 4 Operating Weight The operating weight includes the basic achine with 8 tres plus interediate rings, two-piece boo., stick, quick coupler SW and clashell grab odel GM B /.4 (8 without ejector). 98 versions A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers Weight (kg) 8, 9, 8, 9, ft pt. outriggers Weight Stabilizers raised Capacit Width of clashells Clashell Grab Model GM B Machine stabilit per ISO 67* (7 % of tipping capacit) Stabilizers raised pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg ) ). 88 6). 96 8).4,,).6,7 ) ). 94 6).,6 8).4, * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) without ejector ) with ejector Max. aterial weight = t/, = t/, =. t/, = not authorised A 98 Copact Litronic

33 Clashell Grab with Mono Boo. ft 9 Digging Envelope H96 with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. tooth force Max. torque of hdr. swivel kn (7.4 t) 6 kn Operating Weight 98 The operating weight includes the basic achine with 8 tres plus interediate rings, ono boo., stick, quick coupler SW and clashell grab odel GM B /.4 (8 without ejector). versions A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers A 98 Copact litronic` with stabilizer blade A 98 Copact litronic` with stabilizer blade pt. outriggers Clashell Grab Model GM B - Weight (kg) 7,9 8,9 8, 9, ft pt. outriggers Weight Stabilizers raised Capacit Width of clashells Clashell Grab Model GM B Machine stabilit per ISO 67* (7 % of tipping capacit) Stabilizers raised pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg ) ). 88 6). 96 8).4,,).6,7 ) ). 94 6).,6 8).4, * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) without ejector ) with ejector Max. aterial weight = t/, = t/, =. t/, = not authorised A 98 Copact Litronic

34 Attachents Clashell Grabs pt. outriggers Weight Stabilizers raised Capacit Width of clashells Clashell Grab Model GM 8B Machine stabilit per ISO 67* (7 % of tipping capacit) Stabilizers raised pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg Two-piece boo. ).7 8 4). 86 6). 8 8).4 9,) ).8, ) ). 9 6). 94 8).4, Mono boo. ).7 8 4). 86 6). 8 8).4 9,) ).8, ) ). 9 6). 94 8).4, Offset two-piece boo. ).7 8 4). 86 6). 8 8).4 9,) ).8, ) ). 9 6). 94 8).4, Offset ono boo 4.9 ).7 8 4). 86 6). 8 8).4 9,) ).8, ) ). 9 6). 94 8).4, * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) without ejector ) with ejector ) Shells for loose aterial Max. aterial weight = t/, = t/, =. t/, = not authorised 4 A 98 Copact Litronic