Wheeled Excavator A 900 C. Operating Weight: 36,800-42,800 lb Engine Output: 95 kw / 129 HP Bucket Capacity: yd³

Transcription

1 Wheeled Excavator A 9 C Operating : 36,8-42,8 lb Engine Output: 9 kw / 129 HP Bucket Capacity: yd³

2 A 9 C Operating : 36,8-42,8 lb Engine Output: 9 kw / 129 HP Bucket Capacity: yd³ 2 A 9 C Litronic

3 Reliability Liebherr hydraulic excavators have been designed and built to withstand the toughest of conditions at the building site. Their rugged design, high-tensile materials and individual components ensure maximum availability and long life-expectancy. Performance Liebherr wheel excavators have been designed for maximum productivity. Maximum digging performances, high lift capacities and quick working cycles are prerequisite for efficient building site operation, and a wide variety of attachments optimize every excavator application. Comfort Largely dimensioned and ergonomically designed, the Liebherr excavator cab features an operator s seat which can be individually adjusted, as well as clearly arranged control instruments and ideal allround view. Automatic air-conditioning guarantees an optimum temperature in the Liebherr Feel-Good cab at all times. Economy The Liebherr-Litronic-System increases machine performance, reduces fuel consumption and minimises service and maintenance costs. Due to Liebherr s well- balanced range, the ideal machine can always be selected to suit every application. A 9 C Litronic 3

4 Features High-tensile steel plates in highstress areas for the toughest of applications Well-thought-out and secure bearings for attachments and cylinders Maximum resistance, even when lifting heavy loads 4 A 9 C Litronic

5 Reliability Liebherr construction machinery is proven all over the world every day on the most diverse of building sites. Many years of experience as the world s largest manufacturer of rubber-tyre excavators, continuous development and the introduction of the latest technology are evident in every machine, guaranteeing absolute safety during applications. With its rugged design, and featuring Liebherr components, the Liebherr hydraulic excavators have been designed for extremely long life-expectancy. Quality in detail Liebherr components Functional safety Components such as engine, hydraulic cylinders, swing gear and electric parts have been specially designed, tested and manufactured by Liebherr for construction machinery. Parts including engines and pumps for example, are already being synchronized with each other as early as the construction phase, yielding a constant standard of quality. Safety-orientated components, fitted as standard, allow high availability. The operator can thus concentrate fully on the task at hand, due to the integrated on-board electronics performing a constant balancing of predefined set data. Filtering of metallic filings by the magnetic rod, fitted in the hydraulic system as standard, increases life-expectancy of the hydraulic components and the oil. Rugged attachments Working attachment Piping The durable attachments have been designed for the toughest of applications. All components are optimised to the FEM methods and the hoist cylinders feature bearings on both sides. The hydraulic lines are arranged optimally to safeguard against damage. The electric cabling is made with high-grade materials, thus guaranteeing a reliable supply to the consumer. Liebherr hydraulic cylinders Specific size for each machine High-grade surface coating of the piston rods All Liebherr cylinders feature special long-life sealing systems Shock absorption at both sides in the working cylinders Functional safety Essential operating data is stored and can be recalled at any time. Control and monitoring functions increase functional safety of the machine. Four fixed working modes for output discharge facilitate an effective and efficient operation: Eco-Mode: for high output at big fuel savings Power-Mode: for heavy-duty digging-and loading performance under severe conditions Lift-Mode: for precise handling of heavy loads Fine-Mode: for fine control at precision work A 9 C Litronic

6 Liebherr diesel engine Long life-expectancy, expansive cylinder capacity and increased weight According to level IIIA/Tier 3 Specially designed for construction machinery operation Oil supply even with extreme tilt angle 6 A 9 C Litronic

7 Performance Liebherr wheel excavators have been designed for maximum productivity. Perfectly harmonized, the Liebherr-developed and Liebherr-manufactured components including diesel engine, hydraulic pump and motor, as well as swing gear and cylinders, guarantee maximum performance. Tremendous digging and breakout forces, extensive lifting capacities and quick working and travel movements are thus resulted. Innovative solutions Intelligent undercarriage Multitude of attachments Extensive lifting capacities High productivity Quick working cycles Performance without compromise The entire travel drive unit is integrated in the sturdy undercarriage. Intelligently built and robust in service, the undercarriage offers the travel drive unit the best possible protection from debris, stones and soil. Its advantages are perfect all-terrain compatibility and extremely high ground clearance. Liebherr provide an individual, application-related range of diverse attachments. Hydraulic booms, adjustable both in height and offset positions, as well as standard and offset-adjustable goosenecks, can be combined with different sticks. Canalization and the lifting of pipes are everyday tasks for rubber-tyre excavators. These requirements are endorsed via an intelligent concept of uppercarriage sectioning together with the positioning of the Liebherr engine, mounted at a transversal angle directly in front of the counterweight. Separate hoist cylinder bearing points at the upper end of the basic boom also increase the lifting capacities considerably. High swing torque attained as a result of the Liebherr swing ring featuring internal teeth and swing drive, specially designed to increase the torque. Maximum performance and maximum forces are available to the operator at all times. Rugged undercarriage Various undercarriage designs featuring welded, durable outriggers allow safe positioning, optimum stability, and long life-expectancy of the machine for every application. Prop-up blade / dozing blade in box-type design only two bearing points for high torsional resistance Optional protection system for blade cylinders Litronic Increases productivity of the excavator Reduces fuel consumption Reduces service costs and eases operation Allows maximum sensitivity and as many overlapping movements as are required A 9 C Litronic 7

8 Large-sized cab Adjustable steering column Operator s seat, adjustable in height and can also be adapted to the individual weight of the operator. Consoles with or without possibility of horizontal adjustment. Large roof window Sun blinds 8 A 9 C Litronic

9 Comfort The excavator operator is provided with an ergonomically-arranged working area within Liebherr hydraulic excavator cabs. All switches and functions are logically laid out, and operator s seat, steering column and consoles can be adjusted individually. Conditioning and concentration can thus be maintained throughout the entire working day, guaranteeing constant, maximum productivity of the operator. Mobile comfort Easy access Optimum visibility Pleasant surroundings Wide steps, ergonomically-positioned handles and adjustable steering column allow an easy access into the Liebherr operator s cab. A well-thought-out design of the uppercarriage, featuring large glass panels and rounded edges, increase overall visibility and guarantees a safe overview of the entire working area. Reduced engine speed together with elaborate sound insulation, as well as optimised hydraulic components, allow a comfortable noise level both inside and out. The noise level is comparable with that of a diesel car. Maintenance features Easy maintenance Ease of operation Easy access Semi-Automatical Central lubrication for swing gear and main parts of the attachment. A shut-off valve, fitted to the hydraulic tank as standard, disconnects the system and guarantees ease of maintenance to the hydraulic system. Large maintenance flaps allow comfortable and safe access to all maintenance points. Storage compartment Everything has its place Sufficient storage space for a commercially-approved cooler box behind the operator s seat Drinks holder and storage compartment in operator s cab Large storage box behind the operator s cab Two standard tool boxes in the undercarriage Fully-automatic air-conditioning system The air-conditioning system, fitted as standard, offers the same comfort as that of a regular car Two sensors for precise temperature regulation Ventilation flaps are controlled via keys Reheat function for quick dehumidifying / defrosting of the windshield A 9 C Litronic 9

10 Hydrostatic fan drive Accelerated warm-up period Guaranteed constant oil quality as a result of constant oil temperature Increased life-expectancy of drive components The fan only runs at the output required, thus conserving fuel and reducing the noise level considerably A 9 C Litronic

11 Economy Liebherr offer a wide range of models, guaranteeing optimum suitability for every application. Easy access to components, as well as the proven service offer allows maintenance tasks to be performed in the shortest of times, thus reducing operating costs considerably. Low operating costs Solid Liebherr Engine Automatic idle Intelligent hydraulic management Investment for the future Extensive service offer High resale values Maximum power of the engine is generated even when running at minimum speed. This allows the necessary output without limitation, whereby the torque which is available is ample for the level required, resulting in high productivity with low consumption. If no working or travel movements are being performed, the shiftable function reduces the engine speed to idle, which in turn reduces fuel consumption and emission levels. The state-of-the-art hydraulic system allows conversion of the maximum engine output into high force or speed, as required. The maximum possible forces are available at all times. Proven service offers assured by our service personnel trained directly at the manufacturing plants, and endorsed by our tight-knit network of dealers, provide services in all required areas. Direct contact to Liebherr is guaranteed via complete integration of all service points in our own Liebherr logistics system. Electronic access to our global spare-parts management allows a 98% availability of spare-parts 24 hours a day. Liebherr excavators are built with high-grade materials and quality production to provide a longterm operational life-span, thus guaranteeing maximum resale values. Service-orientated Service points of the engine such as filter or filling amount displays are easily accessible and can be easily reached from the maintenance platform The magnetic rod on the hydraulic oil return flow increases life-expectancy of the oil semi-automatical Central lubrication for swing gear and main parts of the attachment allowing quicker maintenance Modular quick-change system made by Liebherr Likufix connects all hydraulically mounted tools without having to leave the operator s cab, maximum productivity due to tool change being performed in a matter of seconds The suitable digging tool for every application. Your machine is a multi-functional tool carrier and will pay for itself very quickly indeed. Mechanic and hydraulic Liebherr quick-change adapter A 9 C Litronic 11

12 Technical Data Engine Rating per ISO hp (9 kw) at 18 rpm Model Liebherr D 934 S according to level IIIA / Tier 3 Type 4 cylinder in-line Bore/Stroke 4.8/.4 in Displacement 39 in 3 Engine operation 4-stroke diesel unit pump system turbo-charged and after-cooled reduced emissions Cooling system water-cooled and integrated motor oil cooler Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements Fuel tank 77 gal Engine idling sensor controlled Electrical system Voltage 24 V Batteries 2 x 1 Ah/12 V Alternator three phase current 28 V/8 A Hydraulic System Hydraulic pump Liebherr, variable displacement, swash plate pump Max. flow 79 gpm Max. hydr. pressure,76 psi Hydraulic pump regulation and control Liebherr-Synchronic-Comfort-system (LSC) with electronic engine speed sensing regulation, pressure and flow compensation, load sensing and torque controlled swing drive priority Hydraulic tank capacity 46 gal Hydraulic system capacity max. 77 gal Filtration one main return filter with integrated partial micro filtration ( µm) Cooling system compact cooler, consisting of a water cooler, sandwiched with hydraulic oil cooler, fuel cooler and after-cooler cores and hydrostatically driven fan Modes can also be adjusted by the operator to adjust engine and hydraulic performance to match job conditions (Note: All modes provide full max. power) LIFT for precise lifting tasks FINE for precision work at high speed i.e. grading ECO for economic performance POWER for max. output Super-Finish additional operator adjustable work speed function for further increased feathering. Applies to all modes and all control functions RPM adjustment step less adjustment of engine output via rpm Tool Control (Option) ten pre-adjustable pump flows and pressures for add on tools Hydraulic Controls Power distribution via control valve with integrated safety valves, simultaneous and independent operation of travel drive, swing drive and work Control type Attachment and swing proportional via joystick levers Travel proportional via foot pedal Additional functions via switch and/or proportional foot pedals Swing Drive Drive Liebherr swash plate motor with torque control and integrated brake valve Transmission Liebherr compact planetary reduction gear Swing ring Liebherr sealed single race ball bearing swing ring, internal teeth Swing speed 9. rpm Swing torque,978 lbf ft Holding brake wet discs (spring applied pressure released) Option pedal controlled positioning brake Operator s Cab Cab resiliently mounted, sound insulated, tinted windows, front window stores overhead, door with sliding window Operator s seat fully adjustable, shock absorbing suspension, adjustable to operator s weight and size, 6-way adjustable Liebherr seat Joysticks integrated into adjustable seat consoles Monitoring menu driven query of current operating conditions via the LCD display. Automatic monitoring, display, warning (acoustical and optical signal) and saving machine data, for example, engine overheating, low engine oil pressure or low hydraulic oil level Air conditioning standard air conditioning, combined cooler/heater, additional dust filter in fresh air/recirculated Noise emission ISO 6396 L pa (inside cab) = 72 db(a) /14/EC L WA (surround noise) = 99 db(a) Sound level in correspondence with Blue Angel guidelines. Undercarriage Drive variable flow swash plate motor with automatic brake valve Transmission oversized two speed power shift transmission with additional creeper speed Travel speed 1.6 mph (creeper speed off road) 3.1 mph (off road).6 mph (creeper speed on road) 12.4 mph (road travel) 18.6 mph Speeder (Option) Axles 7,48 lb excavator axles; automatic or operator controlled front axle oscillation lock Brakes steering and rigid axle with wet, maintenance-free multi disc brakes with minimized backlash. Spring applied/pressure released parking brake integrated into gear box Stabilization stabilizing blade (adjustable during travel for dozing) 2-point outriggers stabilizing blade, front + 2 pt. outriggers, rear 4-point outriggers Option EW (extra wide gauge) undercarriage Attachment Hydraulic cylinders Liebherr cylinders with special seal system. Shock absorption Pivots sealed, low maintenance Lubrication Liebherr semi-automatic central lubrication system Bucket standard equipped with 17,637 lb safety hook for lifting Option Liebherr quick change adapter 12 A 9 C Litronic

13 Dimensions E D A W H C K Q X U1 V L M T1 B B1 I2 J2 J3 I3 U2 T2 B B2 T3 U3 T1 B B3 B1 ft in A 8 4 B 8 4 B 1) 9 B B2 8 4 B2 1) 9 B3 8 4 C 4 D 7 E 7 8 H 8 1 I2 1 I3 1 3 J J K 4 1 L 8 4 M 3 7 Q 1 2 T1 3 T2 4 T3 3 9 U1 14 U2 1 U ) EW-undercarriage E = Tail radius Tires.- Stick Hydr. Adjustable Gooseneck Boom Boom stabil. 2 pt. blade 4 pt. stabil. 2 pt. blade 4 pt. blade outr. + 2 pt. outr. blade outr. + 2 pt. outr. outr. outr. ft in ft in ft in ft in ft in ft in ft in ft in ft in V * 18 3 * W * 2 * X * 28 7 * Stick Adjustable Up/Down Adjustable Offset Plus Offset Boom Boom stabil. 2 pt. blade 4 pt. stabil. 2 pt. blade 4 pt. blade outr. + 2 pt. outr. blade outr. + 2 pt. outr. outr. outr. ft in ft in ft in ft in ft in ft in ft in ft in ft in V * * W * * 4 * X * * 28 3 * Dimensions are with attachment over steering axle * Attachment over digging axle for shorter transport dimensions A 9 C Litronic 13

14 Backhoe Attachment with Hydr. Adjustable Boom 11 ft m m 2 1 ft Digging Envelope with Quick Change Adapter Stick length ft in Max. digging depth ft in Max. reach at ground level ft in Max. dumping height ft in Max. teeth height ft in Digging Forces Max. digging force lbf 17,62 16,91 1,669 lb 17,637 16,3 1,63 Max. breakout force lbf 24,347 24,347 24,347 lb 24,21 24,21 24,21 Max. breakout force with ripper bucket 28,29 lbf (28,219 lb) Max. possible digging force (stick 7 ) 22,616 lbf (22,78 lb) Operating The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable boom 11, stick 7, quick change adapter 48 and bucket 33. /.6 yd 3. Undercarriage versions A 9 C litronic` with stabilizer blade A 9 C litronic` with 2 pt. outriggers A 9 C litronic` with stabilizer blade + 2 pt. outriggers A 9 C litronic` with 4 pt. outriggers A 9 C EW litronic` with stabilizer blade A 9 C EW litronic` with 2 pt. outriggers 37,9 lb 37,9 lb 4, lb 41, lb 38, lb 38, lb Buckets Machine stability per ISO 67* (7 % of tipping capacity) Cutting width Capacity ISO 741 1) Stabilizers Stabilizer 2 point Stabilizer blade 4 point EW stabilizers EW stabilizer EW 2 point raised blade down outriggers + 2 pt. outr. outriggers raised blade down outriggers down down down down Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) in yd 3 lb ,683 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,728 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 33..6,882 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,36 Y Y Y Y Y Y y Y Y Y y Y Y Y y Y Y Y Y Y Y Y Y Y ,146 V y y Y V V v Y Y y v Y V y v V V V Y Y V Y Y V * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) Y V y v = 3,34 lb/yd 3 max. material weight = 2,28 lb/yd 3 max. material weight = 2,23 lb/yd 3 max. material weight = 14 A 9 C Litronic

15 Lift Capacities with Hydr. Adjustable Boom 11 Stick 7 ft 1 ft ft 2 ft Stick 8 ft 1 ft ft 2 ft ,4* 8,4*,*,* 8,4* 8,4*,*,* 8,4* 8,4*,*,* ,4* 8,4*,*,* 8,4* 8,4*,*,* 9,9,* 6, 8,* 4,6* 4,6*,*,* 6,7 8,* 4,6* 4,6*,*,* 8, 8,* 4,6* 4,6* 21,*,* 8,* 8,* 4,6* 4,6*,*,* 8,* 8,* 4,6* 4,6* 13,9* 13,9* 9,6 13,* 6, 9,6 4, 4,4* 13,9* 13,9*,6 13,* 6,8 11,* 4,4* 4,4* 13,9* 13,9* 12, 13,* 8, 11,* 4,4* 4,4* ,9* 13,9* 13,* 13,*, 11,* 4,4* 4,4* 13,9* 13,9* 13,* 13,* 11,* 11,* 4,4* 4,4* 16,8* 24,8* 9, 14, 6, 9, 3,8 6,4 3, 4,* 18, 24,8*, 1,9* 6,7 12,* 4, 7,4* 3,9 4,* 22, 24,8* 12,* 1,9* 8, 12,*, 7,4* 4,* 4,* ,8* 24,8* 14,9 1,9* 9,9 12,* 6,7 7,4* 4,* 4,* 24,8* 24,8* 1,9* 1,9* 11,9* 12,* 7,4* 7,4* 4,* 4,* 1,9 23,* 9, 14,,8 9, 3,7 6, 3, 4,8* 17,8 23,* 9,9 17,8* 6,4 12,9* 4, 9,4* 3,7 4,8* 21,8 23,* 11,8 17,8* 7,8 12,9*, 9,4* 4,6 4,8* ,* 23,* 14,6 17,8* 9,8 12,9* 6,6 9,4* 4,8* 4,8* 23,* 23,* 17,8* 17,8* 11,8 12,9* 8, 9,4* 4,8* 4,8* 1,9 27, 8,8 14,*, 9, 3, 6, 3,4,4* 17,8 27,* 9,8 18,* 6, 13,* 4, 8,* 3,8,4* 21,9 27,* 11,9 18,* 7,4 13,* 4,9 8,* 4,7,4* ,* 27,* 14,7 18,* 9,4 13,* 6,4 8,*,4*,4* 27,* 27,* 17,7* 18,* 11,7 13,* 8, 8,*,4*,4* 1, 27,9 8,4 14,, 8,6 3,7 6,4 17, 29,7* 9, 18,4*,7 13,* 4, 6,6* 21,7 29,7* 11,4 18,4* 7, 13,*, 6,6* ,7* 29,7* 14,6 18,4* 9, 13,* 6,6* 6,6* 29,7* 29,7* 18,* 18,4* 11,4 13,* 6,6* 6,6* 14,8 27,9 7,7 13,4 4,9 8,4 4,7 7,8* 16,7,6* 8,6 17,7*, 9,*, 7,8* 21,4,6*,7 17,7* 6,8 9,* 6, 7,8* 7 29,,6* 14, 17,7* 8,9 9,* 7,8* 7,8*,6*,6* 17,7* 17,7* 9,* 9,* 7,8* 7,8* ,* 8,* 4,7* 4,7* 8,* 8,* 4,7* 4,7* 8,* 8,* 4,7* 4,7* ,* 8,* 4,7* 4,7* 8,* 8,* 4,7* 4,7* 9,* 9,* 6, 8,* 4,* 4,* 9,* 9,* 6,7 8,* 4,* 4,* 9,* 9,* 8,* 8,* 4,* 4,* ,* 9,* 8,* 8,* 4,* 4,* 9,* 9,* 8,* 8,* 4,* 4,* 11,* 11,* 9,7 11,8* 6, 9,6 3,9 4,6* 3,8 4,* 11,* 11,*, 11,8* 6,8,4* 4, 4,6* 4,* 4,* 11,* 11,* 11,8* 11,8* 8,,4* 4,6* 4,6* 4,* 4,* ,* 11,* 11,8* 11,8*,,4* 4,6* 4,6* 4,* 4,* 11,* 11,* 11,8* 11,8*,4*,4* 4,6* 4,6* 4,* 4,* 16,4 24,6* 9, 14, 6, 9, 3,9 6,4 3,4 4,* 18, 24,6*, 1,4* 6,7 11,9* 4, 8,* 3,8 4,* 22, 24,6* 12, 1,4* 8, 11,9*, 8,* 4,* 4,* ,6* 24,6* 14,9 1,4* 9,8 11,9* 6,7 8,* 4,* 4,* 24,6* 24,6* 1,4* 1,4* 11,9* 11,9* 8,* 8,* 4,* 4,* 1,9 23,8* 9, 14,*,9 9,4 3,7 6, 3, 4,* 17,8 23,8*, 17,6* 6, 12,7* 4,,* 3,6 4,* 21,9 23,8* 11,8 17,6* 7,7 12,7*,,* 4,* 4,* 26 23,8* 23,8* 14,7 17,6* 9,8* 12,7* 6,6,* 4,* 4,* 23,8* 23,8* 17,6* 17,6* 11,7 12,7* 8,,* 4,* 4,* 16, 26,7* 8,9 14,,6 9, 3,6 6, 3, 4,8* 17,9 26,7* 9,8 18,* 6, 13,* 4, 9,8* 3,6 4,8* 22,* 26,7* 11,9 18,* 7,4 13,* 4,9 9,8* 4, 4,8* ,7* 26,7* 14,8 18,* 9, 13,* 6,4 9,8* 4,8* 4,8* 26,7* 26,7* 17,7 18,* 11,8 13,* 8, 9,8* 4,8* 4,8* 1, 27,6 8,4 14,, 8,6 3,,9* 17, 29,* 9, 18,*,7 13,* 4,,9* 21,7 29,* 11,4 18,* 7, 13,*,,9* , 29,* 14,8 18,* 9, 13,*,9*,9* 29,* 29,* 18, 18,* 11,4 13,*,9*,9* 14,9 27,9 7,7 13,4 4,9 8,4 4, 7, 16,8,6* 8,7 18,*,4,* 4,9 7,7* 21,4,6*,8 18,* 6,8,* 6, 7,7* 21 29,4,6* 14, 18,* 8,8,* 7,7* 7,7*,6*,6* 18, 18,*,*,* 7,7* 7,7* 14, 19,* 12, 16,* 16, 19,* 13,9 16,* 19,* 19,* 16,* 16,* 11 19,* 19,* 16,* 16,* 19,* 19,* 16,* 16,* Stick 8 8 ft 1 ft ft 2 ft 2 1 1,9*,9*,9*,9*,9*,9* 11 7,9*,9*,9*,9* 8,* 8,* 4,* 4,* 8,* 8,* 4,* 4,* 8,* 8,* 4,* 4,* ,* 8,* 4,* 4,* 8,* 8,* 4,* 4,* 8,7* 8,7* 6, 7,8* 3,8* 3,8* 8,7* 8,7* 6,8 7,8* 3,8* 3,8* 8,7* 8,7* 7,8* 7,8* 3,8* 3,8* ,7* 8,7* 7,8* 7,8* 3,8* 3,8* 8,7* 8,7* 7,8* 7,8* 3,8* 3,8* 9,7,* 6, 9, 3,9,6* 3,6* 3,6*,4,* 6,8 9,7* 4,4,6* 3,6* 3,6*,*,* 8, 9,7*,*,6* 3,6* 3,6* 2 11,*,* 9,7* 9,7*,6*,6* 3,6* 3,6*,*,* 9,7* 9,7*,6*,6* 3,6* 3,6* 16,7 23,4* 9, 14,4 6, 9,4 3,9 6,4 3, 3,7* 18, 23,4*, 1,* 6,8 11,6* 4, 8,* 3,6 3,7* 22, 23,4* 12, 1,* 8, 11,6*, 8,* 3,7* 3,7* ,4* 23,4* 1, 1,* 9,8 11,6* 6,7 8,* 3,7* 3,7* 23,4* 23,4* 1,* 1,* 11,6* 11,6* 8,* 8,* 3,7* 3,7* 16, 24,* 9, 14, 6, 9, 3,8 6, 3, 3,9* 17,7* 24,* 9,8* 17,* 6,6 12,6* 4,,* 3,4 3,9* 21,* 24,* 11,7* 17,* 7,8 12,6*,*,* 3,9* 3,9* 24,* 24,* 14,* 17,* 9,7 12,6* 6,6,* 3,9* 3,9* 24,* 24,* 17,* 17,* 11,7 12,6* 8,,* 3,9* 3,9* 16, 2,9* 8,9 14,, 9, 3,6 6, 3, 4,* 17,7 2,9* 9,8 17,9* 6, 12,9* 4, 9,9* 3,4 4,* 21, 2,9* 11,8 17,9* 7, 12,9* 4,9 9,9* 4, 4,* 2,9* 2,9* 14, 17,9* 9,4 12,9* 6,4 9,9* 4,* 4,* 2,9* 2,9* 17,6* 17,9* 11,7 12,9* 8, 9,9* 4,* 4,* 1, 27,4* 8, 14,, 8,6 3,4,9 3,,* 16,9 29,* 9, 18,*,7 13,* 3,8 6,* 3,7,* 21,7 29,* 11,4 18,* 7, 13,* 4,8 6,* 4,7,* 28,4 29,* 14,8 18,* 9, 13,* 6, 6,*,*,* 29,* 29,* 17,9* 18,* 11, 13,* 6,* 6,*,*,* ,8 27,8 7,8 13,4 4,8 8, 4, 7, 16,6,* 8,7 18,*,4 11,* 4, 7,* 21,,*,8 18,* 6,7 11,*,7 7,* ,,* 14, 18,* 8,8 11,* 7,* 7,*,*,* 18, 18,* 11,* 11,* 7,* 7,* 14, 21,9* 8, 12,* 16, 21,9* 9, 12,*,7 21,9* 11,6 12,* ,9* 21,9* 12,* 12,* 21,9* 21,9* 12,* 12,* Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 48 without grab attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. 26,4 lb). With out the quick-change adapter, lift capacities will increase by up to 498 lb. A 9 C Litronic 1

16 Lift Capacities with Hydr. Adjustable Boom 11 EW-Undercarriage Stick 7 ft 1 ft ft 2 ft Stick 8 ft 1 ft ft 2 ft 2 8,4* 8,4*,*,* 8,4* 8,4*,*,* ,4* 8,4*,*,* 2 8,* 8,* 4,7* 4,7* 8,* 8,* 4,7* 4,7* ,* 8,* 4,7* 4,7*,*,* 6,7 8,* 4,6* 4,6*,*,* 7, 8,* 4,6* 4,6* 21,*,* 8,* 8,* 4,6* 4,6* 9,* 9,* 6,7 8,* 4,* 4,* 9,* 9,* 7,4 8,* 4,* 4,* ,* 9,* 8,* 8,* 4,* 4,* 1 13,9* 13,9*,6 13,* 6,7 9,6 4,4* 4,4* 13,9* 13,9* 11,4 13,* 7,4 11,* 4,4* 4,4* ,9* 13,9* 13, 13,* 8,4 11,* 4,4* 4,4* 1 11,* 11,*, 11,8* 6,8 9,6 4, 4,6* 4,* 4,* 11,* 11,* 11, 11,8* 7,4,4* 4,6* 4,6* 4,* 4,* ,* 11,* 11,8* 11,8* 8,,4* 4,6* 4,6* 4,* 4,* 18, 24,8*, 14,4 6,7 9, 4, 6,4 3,9 4,*,* 24,8* 11, 1,9* 7, 12,* 4,7 7,4* 4,4 4,* , 24,8* 12,6 1,9* 8,4 12,*, 7,4* 4,* 4,* 18, 24,6*, 14,4 6,7 9, 4, 6,4 3,8 4,*, 24,6* 11, 1,4* 7,4 11,9* 4,8 8,* 4,* 4,* ,4* 24,6* 12,6 1,4* 8,4 11,9*, 8,* 4,* 4,* 17,8 23,* 9,9 14, 6,4 9, 4, 6, 3,7 4,8* 19,4* 23,*,9 17,8* 7, 12,9* 4,6 9,4* 4, 4,8* ,7 23,* 12,4 17,8* 8, 12,9*,4 9,4* 4,8* 4,8* 17,8 23,8*, 14, 6, 9,4 4, 6, 3,6 4,* 19,4 23,8*,7 17,6* 7, 12,7* 4,6,* 4, 4,* 26 22,7 23,8* 12,4* 17,6* 8, 12,7*,4,* 4,* 4,* 17,8 27, 9,8 14,* 6, 9, 4, 6, 3,8,4*, 27,*,8 18,* 6,7 13,* 4,4 8,* 4,,4* ,* 27,* 12,6 18,* 7,7 13,*, 8,*,,4* 17,9 26,7* 9,8 14, 6, 9, 4, 6, 3,6 4,8* 19, 26,7*,8 18,* 6,7 13,* 4,4 9,8* 4, 4,8* ,9 26,7* 12, 18,* 7,8 13,*, 9,8* 4,8 4,8* 17, 28, 9, 14,,7 8,6 4, 6, 19, 29,7*, 18,4* 6, 13,* 4,7 6,6* , 29,7* 12, 18,4* 7,4 13,*, 6,6* 17, 27,7 9, 14,,7 8,6 4,,9* 19, 29,*, 18,* 6,4 13,* 4,4,9* , 29,* 12, 18,* 7,4 13,*,,9* 16,7 28, 8,6 13,4, 8,4, 7,8* 18,9,6* 9,6 17,7* 6, 9,*,8 7,8* 7 22,9,6* 11,4 17,7* 7, 9,* 6,8 7,8* 16,8 28, 8,6 13,4,4 8,4 4,9 7, 19,,6* 9,7 18,* 6,,*,4 7,7* 21 23,,6* 11,4 18,* 7,,* 6,4 7,7* , 19,* 13,9 16,* 18, 19,* 1,7 16,* 11 19,* 19,* 16,* 16,* Stick 8 8 ft 1 ft ft 2 ft,9*,9*,9*,9* 11 7,9*,9* 2 8,* 8,* 4,* 4,* 8,* 8,* 4,* 4,* ,* 8,* 4,* 4,* 8,7* 8,7* 6,8 7,8* 3,8* 3,8* 8,7* 8,7* 7,4 7,8* 3,8* 3,8* ,7* 8,7* 7,8* 7,8* 3,8* 3,8* 1,4,* 6,8 9,6 4,4,6* 3,6* 3,6*,*,* 7,* 9,7* 4,8,6* 3,6* 3,6* 2 11,*,* 8, 9,7*,6,6* 3,6* 3,6* 18, 23,4*, 14,4* 6,8 9, 4, 6,4 3,6 3,7*, 23,4*,9 1,* 7, 11,6* 4,8 8,* 3,7* 3,7* ,4* 23,4* 12, 1,* 8, 11,6*,6 8,* 3,7* 3,7* 17,7* 24,* 9,8* 14, 6,6 9, 4, 6, 3,4 3,9* 19,4 24,*,7 17,* 7, 12,6* 4,7,* 3,8 3,9* ,7 24,* 12, 17,* 8, 12,6*,4,* 3,9* 3,9* 17,7 2,9* 9,8 14, 6, 9, 4, 6, 3,4 4,* 19,6 2,9*,8 17,9* 6,8 12,9* 4, 9,9* 3,9 4,* 26 23, 2,9* 12, 17,9* 7,9 12,9*, 9,9* 4,* 4,* 1 16,9 27,4* 9, 14,,7 8,6 3,8,9 3,7,* 19, 29,*, 18,* 6,4 13,* 4, 6,* 4,,* , 29,* 12, 18,* 7,4 13,*, 6,*,,* 16,6 27,9 8,7 13,,4 8,4 4, 7, 18,8,* 9,7 18,* 6, 11,*, 7,* ,8,* 11,4 18,* 7, 11,* 6, 7,* 16, 21,9* 9, 12,* 18, 21,9*,4 12,* ,9* 21,9* 12,* 12,* Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 48 without grab attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. 26,4 lb). With out the quick-change adapter, lift capacities will increase by up to 498 lb. 16 A 9 C Litronic

17 Backhoe Attachment with Gooseneck Boom 16 ft m Digging Envelope with Quick Change Adapter Stick length ft in Max. digging depth ft in Max. reach at ground level ft in Max. dumping height ft in Max. teeth height ft in Digging Forces Max. digging force lbf 17,62 16,91 1,669 lb 17,637 16,3 1,63 Max. breakout force lbf 24,347 24,347 24,347 lb 24,21 24,21 24, Max. breakout force with ripper bucket Max. possible digging force (stick 7 ) 28,29 lbf (28,219 lb) 22,616 lbf (22,78 lb) - -3 Operating The operating weight includes the basic machine with 8 tires plus spacer rings, gooseneck boom 16, stick 7, quick change adapter 48 and bucket 33. /.6 yd m Undercarriage versions 2 1 ft A 9 C litronic` with stabilizer blade A 9 C litronic` with 2 pt. outriggers A 9 C litronic` with stabilizer blade + 2 pt. outriggers A 9 C litronic` with 4 pt. outriggers A 9 C EW litronic` with stabilizer blade A 9 C EW litronic` with 2 pt. outriggers 37, lb 37, lb 39,4 lb 39,9 lb 37, lb 37, lb Buckets Machine stability per ISO 67* (7 % of tipping capacity) Cutting width Capacity ISO 741 1) Stabilizers Stabilizer 2 point Stabilizer blade 4 point EW stabilizers EW stabilizer EW 2 point raised blade down outriggers + 2 pt. outr. outriggers raised blade down outriggers down down down down Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) in yd 3 lb ,683 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,728 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 33..6,882 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,36 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,146 V V y Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) Y V y v = 3,34 lb/yd 3 max. material weight = 2,28 lb/yd 3 max. material weight = 2,23 lb/yd 3 max. material weight = A 9 C Litronic 17

18 Lift Capacities with Gooseneck Boom 16 Stick 7 ft 1 ft ft 2 ft Stick 8 ft 1 ft ft 2 ft 2 1 1,7*,7* 4,* 4,*,7*,7* 4,* 4,*,7*,7* 4,* 4,* 6,7*,7* 4,* 4,*,7*,7* 4,* 4,* 9, 9,9*,8 9,* 4,4 4,4* 9,9* 9,9* 6, 9,* 4,4* 4,4* 9,9* 9,9* 7,7 9,* 4,4* 4,4* ,9* 9,9* 9,* 9,* 4,4* 4,4* 9,9* 9,9* 9,* 9,* 4,4* 4,4* 1,,* 8,4 12,8*,4 8,9 3,8 4,* 17,,* 9, 12,8* 6,,4* 4, 4,*,*,* 11,4 12,8* 7,,4* 4,* 4,* 24 9,*,* 12,8* 12,8* 9,4,4* 4,* 4,*,*,* 12,8* 12,8*,4*,4* 4,* 4,*,*,* 7,6 13,, 8, 3,6,6* 3,6 4,9*,*,* 8, 16,*,6 11,8* 4,,6* 4, 4,9*,*,*, 16,* 7, 11,8*,,6* 4,9* 4,9* 2 2,*,* 13,8 16,* 9, 11,8*,6*,6* 4,9* 4,9*,*,* 16,* 16,* 11, 11,8*,6*,6* 4,9* 4,9* 12,8 13,4* 7, 12,6 4,8 8, 3,6,7* 13,4* 13,4* 8, 17,8*,4 12,8* 4,,7* 13,4* 13,4*, 17,8* 6,7 12,8*,,7* 24 13,4* 13,4* 13, 17,8* 8,7 12,8*,7*,7* 13,4* 13,4* 17, 17,8* 11, 12,8*,7*,7* 12,9,4* 7, 12, 4,7 8, 4, 6,9 14,7,4* 7,9 17,9*, 12,9* 4, 7,* 19,,4* 9,9 17,9* 6,6 12,9*,6 7,* 22 7,4*,4* 13, 17,9* 8,7 12,9* 7,* 7,*,4*,4* 17, 17,9* 11, 12,9* 7,* 7,* 13, 23,* 7, 12,7, 8,9 1, 23,* 8, 1,9*,8 11,6* 19,6 23,*, 1,9* 7, 11,6* ,* 23,* 13,4 1,9* 9,4 11,6* 23,* 23,* 1,9* 1,9* 11,6* 11,6* ,7* 4,7* 4,7* 4,7* 4,7* 4,7* ,7* 4,7* 4,7* 4,7*,9 6,4* 4,* 4,* 6,4* 6,4* 4,* 4,* 6,4* 6,4* 4,* 4,* ,4* 6,4* 4,* 4,* 6,4* 6,4* 4,* 4,*,8 8,8* 4,* 4,* 6,4 8,8* 4,* 4,* 7,7 8,8* 4,* 4,* 24 8,8* 8,8* 4,* 4,* 8,8* 8,8* 4,* 4,* 1, 18,6* 8, 12,*,4 8,9 3,7,4* 3,6 4,* 17,4 18,6* 9,4 12,* 6,,* 4,,4* 4, 4,* 18,6* 18,6* 11, 12,* 7,,*,,4* 4,* 4,* 2 18,6* 18,6* 12,* 12,* 9,4,*,4*,4* 4,* 4,* 18,6* 18,6* 12,* 12,*,*,*,4*,4* 4,* 4,* 12,4* 12,4* 7,6 13,, 8, 3,6 6, 3,4 4,4* 12,4* 12,4* 8, 1,6*,6 11,6* 4, 7,* 3,8 4,4* 12,4* 12,4*,6 1,6* 6,9 11,6*, 7,* 4,4* 4,4* ,4* 12,4* 13,9 1,6* 9, 11,6* 6,4 7,* 4,4* 4,4* 12,4* 12,4* 1,6* 1,6* 11, 11,6* 7,* 7,* 4,4* 4,4* 12,7 13,6* 7, 12,6 4,8 8, 3,,* 3,,* 13,6* 13,6* 8, 17,6*, 12,7* 3,9,* 3,9,* 13,6* 13,6*, 17,6* 6,7 12,7* 4,8,* 4,8,* ,6* 13,6* 13, 17,6* 8,7 12,7*,*,*,*,* 13,6* 13,6* 17, 17,6* 11, 12,7*,*,*,*,* 12,7 19,6* 7, 12,4 4,7 8, 3,8 6,4* 14, 19,6* 7,8 17,9*, 12,9* 4, 6,4* 18,9 19,6* 9,9 17,9* 6, 12,9*, 6,4* ,6* 19,6* 13, 17,9* 8,6 12,9* 6,4* 6,4* 19,6* 19,6* 17, 17,9*,9 12,9* 6,4* 6,4* 13, 24,* 7, 12,6 4,8 8, 4,8 8, 14,9 24,* 8, 16,*,4 9,9*,4 9,7* 19,4 24,*, 16,* 6,7 9,9* 6,7 9,7* 24,* 24,* 13, 16,* 8,8 9,9* 8,7 9,7* 24,* 24,* 16,* 16,* 9,9* 9,9* 9,7* 9,7* Stick 8 8 ft 1 ft ft 2 ft ,* 4,* 4,* 4,* 4,* 4,* ,* 4,* 4,* 4,* 6, 6,7* 3,7* 3,7* 6,6 6,7* 3,7* 3,7* 6,7* 6,7* 3,7* 3,7* ,7* 6,7* 3,7* 3,7* 6,7* 6,7* 3,7* 3,7*,8 8,4* 3,6* 3,6* 6,4 8,4* 3,6* 3,6* 7,7 8,4* 3,6* 3,6* ,4* 8,4* 3,6* 3,6* 8,4* 8,4* 3,6* 3,6* 1,8 17,* 8, 11,7*,4 9, 3,7 6, 3,4 3,7* 17,* 17,* 9,4 11,7* 6, 9,7* 4, 6,* 3,7* 3,7* 17,* 17,* 11, 11,7* 7,4 9,7*, 6,* 3,7* 3,7* ,* 17,* 11,7* 11,7* 9,4 9,7* 6,* 6,* 3,7* 3,7* 17,* 17,* 11,7* 11,7* 9,7* 9,7* 6,* 6,* 3,7* 3,7* 13,4 14,4* 7,6 13,, 8, 3, 6, 3, 4,* 14,4* 14,4* 8, 1,*,6 11,* 4, 7,9* 3,6 4,* 14,4* 14,4*,6 1,* 6,9 11,* 4,9 7,9* 4,* 4,* 26 14,4* 14,4* 13,9 1,* 9, 11,* 6,4 7,9* 4,* 4,* 14,4* 14,4* 1,* 1,* 11,* 11,* 7,9* 7,9* 4,* 4,* 12,6 13,7* 7, 12, 4,7 8, 3,4,9 3, 4,6* 13,7* 13,7* 7,9 17,*, 12,* 3,8 7,* 3,7 4,6* 13,7* 13,7*, 17,* 6,6 12,* 4,8 7,* 4,6* 4,6* ,7* 13,7* 13, 17,* 8,7 12,* 6, 7,* 4,6* 4,6* 13,7* 13,7* 17, 17,* 11, 12,* 7,* 7,* 4,6* 4,6* 12,6 18,8* 6,9 12, 4,6 8, 3,6,7* 14,4 18,8* 7,7 17,8*, 12,8* 4,,7* 18,8 18,8* 9,8 17,8* 6, 12,8*,,7* ,8* 18,8* 13, 17,8* 8, 12,8*,7*,7* 18,8* 18,8* 17, 17,8*,8 12,8*,7*,7* 12,9 24,8* 7, 12,4 4,7 8, 4, 7,7 14,7 24,8* 7,9 16,*, 11,6*, 8,* 19, 24,8* 9,9 16,* 6,6 11,6* 6, 8,* 24,8* 24,8* 13, 16,* 8,6 11,6* 8, 8,* 24,8* 24,8* 16,* 16,* 11, 11,6* 8,* 8,* 13,7 18,* 7, 11,9* 7, 11,4* 1, 18,* 8,4 11,9* 8, 11,4* 18,* 18,*, 11,9*, 11,4* 1 18,* 18,* 11,9* 11,9* 11,4* 11,4* 18,* 18,* 11,9* 11,9* 11,4* 11,4* Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 48 without grab attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. 26,4 lb). Without the quick-change adapter, lift capacities will increase by up to 498 lb. 18 A 9 C Litronic

19 Lift Capacities with Gooseneck Boom 16 EW-Undercarriage Stick 7 ft 1 ft ft 2 ft Stick 8 ft 1 ft ft 2 ft 2 2 4,7* 4,7* 4,7* 4,7* ,7* 4,7*,7*,7* 4,* 4,*,7*,7* 4,* 4,* 6,7*,7* 4,* 4,* 6,4* 6,4* 4,* 4,* 6,4* 6,4* 4,* 4,* ,4* 6,4* 4,* 4,* 1 9,9* 9,9* 6, 9,* 4,4* 4,4* 9,9* 9,9* 7, 9,* 4,4* 4,4* ,9* 9,9* 8, 9,* 4,4* 4,4* 1 6,4 8,8* 4,* 4,* 7, 8,8* 4,* 4,* 24 8, 8,8* 4,* 4,* 17,,* 9, 12,8* 6, 9, 4, 4,* 19,,*, 12,8* 6,7,4* 4,* 4,* 24 9,*,* 12, 12,8* 7,7,4* 4,* 4,* 17,4 18,6* 9,4 12,* 6, 9, 4,,4* 4, 4,* 18,6* 18,6*,4 12,* 6,7,* 4,6,4* 4,* 4,* 2 18,6* 18,6* 12, 12,* 7,7,*,4,4* 4,* 4,*,*,* 8, 13,,6 8,6 4,,6* 4, 4,9*,*,* 9, 16,* 6, 11,8* 4,,6* 4, 4,9* 2 2,*,* 11, 16,* 7, 11,8*,,6* 4,9* 4,9* 12,4* 12,4* 8, 13,,6 8,6 4, 6, 3,8 4,4* 12,4* 12,4* 9, 1,6* 6, 11,6* 4, 7,* 4, 4,4* ,4* 12,4* 11, 1,6* 7, 11,6*, 7,* 4,4* 4,4* 13,4* 13,4* 8, 12,7,4 8, 4,,7* 13,4* 13,4* 9, 17,8* 6, 12,8* 4,,7* 24 13,4* 13,4*,7 17,8* 7, 12,8*,,7* 13,6* 13,6* 8, 12,6, 8, 3,9,* 3,9,* 13,6* 13,6* 9, 17,6* 6, 12,7* 4,4,* 4,,* ,6* 13,6*,6 17,6* 7, 12,7*,,*,*,* 14,7,4* 7,9 12,, 8, 4, 7, 16,7,4* 8,9 17,9*,9 12,9*, 7,* 22 7,4*,4*,6 17,9* 7, 12,9*,9 7,* 14, 19,6* 7,8 12,, 8, 4, 6,4* 16,6 19,6* 8,8 17,9*,9 12,9* 4,8 6,4* ,6* 19,6*, 17,9* 6,9 12,9*,6 6,4* 1, 23,* 8, 12,7,8 8,9 17, 23,* 9, 1,9* 6, 11,6* , 23,*,8 1,9* 7,6 11,6* 14,9 24,* 8, 12,6,4 8,,4 8, 17, 24,* 9, 16,* 6, 9,9* 6, 9,7*,8 24,*,6 16,* 7, 9,9* 7, 9,7* 1 1 Stick 8 8 ft 1 ft ft 2 ft 2 4,* 4,* 4,* 4,* ,* 4,* 6,6 6,7* 3,7* 3,7* 6,7* 6,7* 3,7* 3,7* ,7* 6,7* 3,7* 3,7* 1 6,4 8,4* 3,6* 3,6* 7, 8,4* 3,6* 3,6* , 8,4* 3,6* 3,6* 17,* 17,* 9,4 11,7* 6, 9, 4, 6, 3,7* 3,7* 17,* 17,*,4 11,7* 6,7 9,7* 4,6 6,* 3,7* 3,7* ,* 17,* 11,7* 11,7* 7,7 9,7*,4 6,* 3,7* 3,7* 14,4* 14,4* 8, 13,,6 8, 4, 6, 3,6 4,* 14,4* 14,4* 9, 1,* 6, 11,* 4,4 7,9* 4,* 4,* 26 14,4* 14,4* 11, 1,* 7, 11,*, 7,9* 4,* 4,* 13,7* 13,7* 7,9 12,6, 8, 3,8,9 3,7 4,6* 13,7* 13,7* 8,9 17,*,9 12,* 4, 7,* 4, 4,6* ,7* 13,7*,6 17,* 7, 12,*, 7,* 4,6* 4,6* 1 14,4 18,8* 7,7 12,4, 8, 4,,7* 16,4 18,8* 8,7 17,8*,8 12,8* 4,,7* ,8* 18,8*,4 17,8* 6,9 12,8*,,7* 14,7 24,8* 7,9 12,, 8,, 7,8 16,8 24,8* 8,8 16,*,9 11,6*,6 8,*,6 24,8*, 16,* 7, 11,6* 6,6 8,* 1, 18,* 8,4 11,9* 8, 11,4* 17,6 18,* 9,4 11,9* 9, 11,4* 1 18,* 18,* 11, 11,9*,7 11,4* Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 48 without grab attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. 26,4 lb). Without the quick-change adapter, lift capacities will increase by up to 498 lb. A 9 C Litronic 19

20 Backhoe Attachment with Adjustable Up/Down Plus Offset Boom 11 ft m Digging Envelope with Quick Change Adapter 4 6 Stick length ft in Max. digging depth ft in Max. reach at ground level ft in Max. dumping height ft in Max. teeth height ft in stick 7 2 stick 8 3 stick 8 8 at max. attachment offset with vertical ditch walls stick 7 stick 8 6 stick 8 8 with set straight boom m 2 1 ft Digging Forces 4 6 Max. digging force lbf 17,62 16,91 1,669 lb 17,637 16,3 1,63 Max. breakout force lbf 24,347 24,347 24,347 lb 24,21 24,21 24,21 Max. breakout force with ripper bucket 28,29 lbf (28,219 lb) Max. possible digging force (stick 7 ) 22,616 lbf (22,78 lb) Operating The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable offset boom 11, stick 7, quick change adapter 48 and bucket 33. /.6 yd 3. 8 Undercarriage versions 8 A 9 C litronic` with stabilizer blade A 9 C litronic` with 2 pt. outriggers A 9 C litronic` with stabilizer blade + 2 pt. outriggers A 9 C litronic` with 4 pt. outriggers A 9 C EW litronic` with stabilizer blade A 9 C EW litronic` with 2 pt. outriggers 39,7 lb 39,9 lb 42, lb 42,8 lb 38, lb 38, lb Buckets Machine stability per ISO 67* (7 % of tipping capacity) Cutting width Capacity ISO 741 1) Stabilizers Stabilizer 2 point Stabilizer blade 4 point EW stabilizers EW stabilizer EW 2 point raised blade down outriggers + 2 pt. outr. outriggers raised blade down outriggers down down down down Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) in yd 3 lb ,683 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,728 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 33..6,882 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,36 Y V V Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,146 y y v V y y Y Y V Y Y V Y Y V V y y Y Y V Y Y V * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) Max. material weight Y = 3,34 lb/yd 3, V = 2,28 lb/yd 3, y = 2,23 lb/yd 3, v = A 9 C Litronic

21 Lift Capacities with Adjustable Up/Down Plus Offset Boom 11 Stick 7 ft 1 ft ft 2 ft Stick 8 ft 1 ft ft 2 ft ,4* 8,4*,*,* 8,4* 8,4*,*,* 8,4* 8,4*,*,* ,4* 8,4*,*,* 8,4* 8,4*,*,*,*,* 6, 8,* 4,4* 4,4*,*,* 6,6 8,* 4,4* 4,4*,*,* 7,9 8,* 4,4* 4,4* 21,*,* 8,* 8,* 4,4* 4,4*,*,* 8,* 8,* 4,4* 4,4* 13,8* 13,8* 9,7 13,* 6, 9,6 3,8 4,* 13,8* 13,8*,* 13,* 6,8,9* 4,* 4,* 13,8* 13,8* 12,* 13,* 8,,9* 4,* 4,* ,8* 13,8* 13,* 13,*,,9* 4,* 4,* 13,8* 13,8* 13,* 13,*,9*,9* 4,* 4,* 16,* 24,* 9, 14, 6, 9,4 3,6 6, 3, 4,* 18, 24,*, 1,4* 6,7 11,7* 4, 7,4* 3,7 4,* 22,* 24,* 11,9 1,4* 8, 11,7*, 7,4* 4,* 4,* ,* 24,* 14,9 1,4* 9,9 11,7* 6, 7,4* 4,* 4,* 24,* 24,* 1,4* 1,4* 11,7* 11,7* 7,4* 7,4* 4,* 4,* 16, 24,* 9, 14,,8 9, 3, 6, 3, 4,6* 17,8 24,*, 17,* 6,4 12,4* 3,9 9,4* 3, 4,6* 21,8* 24,* 11,8 17,* 7,8 12,4* 4,9 9,4* 4,4 4,6* ,* 24,* 14, 17,* 9,8 12,4* 6,4 9,4* 4,6* 4,6* 24,* 24,* 17,* 17,* 11,6* 12,4* 8, 9,4* 4,6* 4,6* 1,9 26,7* 8,8 14,,4 8,9 3,,8 3,,* 17,9 26,7* 9,8 17,4* 6, 12,6* 3,7 8,* 3,,* 21,9 26,7* 12, 17,4* 7, 12,6* 4,7 8,* 4,4,* ,7* 26,7* 14,7 17,4* 9, 12,6* 6, 8,*,*,* 26,7* 26,7* 17,4* 17,4* 11,6 12,6* 7,8 8,*,*,* 14,8 27,* 8, 13,7 4,8 8, 3,4 6, 16,7 28,8* 9, 17,8*,4 12,6* 3,8 6,* 21, 28,8* 11, 17,8* 6,7 12,6* 4,9 6,* 23 28, 28,8* 14,4 17,8* 8,8 12,6* 6,* 6,* 28,8* 28,8* 17,8* 17,8* 11, 12,6* 6,* 6,* 14, 27, 7, 13, 4, 8, 4, 7,* 16, 29,8* 8, 17,*, 8,6* 4,8 7,*,9 29,8*, 17,* 6,4 8,6* 6, 7,* 8 28,9 29,8* 13,7 17,* 8, 8,6* 7,* 7,* 29,8* 29,8* 17,* 17,* 8,6* 8,6* 7,* 7,* ,* 8,* 4,* 4,* 8,* 8,* 4,* 4,* 8,* 8,* 4,* 4,* ,* 8,* 4,* 4,* 8,* 8,* 4,* 4,* 9,* 9,* 6, 8,* 4,* 4,* 9,* 9,* 6,7 8,* 4,* 4,* 9,* 9,* 8,* 8,* 4,* 4,* ,* 9,* 8,* 8,* 4,* 4,* 9,* 9,* 8,* 8,* 4,* 4,* 9,7 11,8* 6, 9,6 3,7 4,6* 3,6 3,8*,7 11,8* 6,8,4* 4, 4,6* 3,8* 3,8* 11,8* 11,8* 8,,4* 4,6* 4,6* 3,8* 3,8* ,8* 11,8*,,4* 4,6* 4,6* 3,8* 3,8* 11,8* 11,8*,4*,4* 4,6* 4,6* 3,8* 3,8* 16,4 24,* 9,4 14, 6, 9,4* 3,7 6, 3, 3,9* 18,4 24,*, 1,* 6,7 11,* 4, 8,* 3, 3,9* 22, 24,* 12, 1,* 8, 11,*, 8,* 3,9* 3,9* ,* 24,* 14,9 1,* 9,9 11,* 6,6 8,* 3,9* 3,9* 24,* 24,* 1,* 1,* 11,* 11,* 8,* 8,* 3,9* 3,9* 16, 23,9* 9, 13,9,9 9,4 3, 6, 2,9 4,* 18, 23,9*, 16,9* 6, 12,* 4, 9,7* 3, 4,* 21,* 23,9* 11,9 16,9* 7,7 12,* 4,9 9,7* 4,* 4,* ,9* 23,9* 14,6* 16,9* 9,7 12,* 6,4 9,7* 4,* 4,* 23,9* 23,9* 16,9* 16,9* 11,6 12,* 8, 9,7* 4,* 4,* 16, 2,9* 8,9 14,, 9, 3,,8 2,9 4,6* 18, 2,9* 9,8 17,4*,9 12,* 3,7 9,4* 3, 4,6* 21,* 2,9* 12,* 17,4* 7, 12,* 4,7 9,4* 4, 4,6* ,9* 2,9* 14,* 17,4* 9,* 12,* 6, 9,4* 4,6* 4,6* 2,9* 2,9* 17,* 17,4* 11,7 12,* 7,8 9,4* 4,6* 4,6* 14,8 27,4 8, 14, 4,8 8, 3,,6* 16,7 28,6* 9, 17,7*,4 12,7* 3,6,6* 21, 28,6* 11, 17,7* 6,8 12,7* 4,6,6* , 28,6* 14,8 17,7* 8,8 12,7*,6*,6* 28,6* 28,6* 17,6* 17,7* 11,* 12,7*,6*,6* 14,4 27,6 7, 13, 4, 8, 3,9 7, 16, 29,9* 8, 17,6*, 9,7* 4, 7,* 21, 29,9*,4 17,6* 6,4 9,7*,7 7,* 21 29, 29,9* 13,8 17,6* 8, 9,7* 7,* 7,* 29,9* 29,9* 17,6* 17,6* 9,7* 9,7* 7,* 7,* 13,6 18,* 11,4 1,* 1,4 18,* 12,9 1,* 18,* 18,* 1,* 1,* ,* 18,* 1,* 1,* 18,* 18,* 1,* 1,* Stick 8 8 ft 1 ft ft 2 ft 2 1 1,8*,8*,8*,8*,8*,8* 11 7,8*,8*,8*,8* 8,* 8,* 4,* 4,* 8,* 8,* 4,* 4,* 8,* 8,* 4,* 4,* ,* 8,* 4,* 4,* 8,* 8,* 4,* 4,* 8,7* 8,7* 6, 7,8* 3,6* 3,6* 8,7* 8,7* 6,8 7,8* 3,6* 3,6* 8,7* 8,7* 7,8* 7,8* 3,6* 3,6* 23 8,7* 8,7* 7,8* 7,8* 3,6* 3,6* 8,7* 8,7* 7,8* 7,8* 3,6* 3,6* 9,8,* 6,4 9, 3,8,6* 3,4 3,*,4,* 6,9 9,7* 4,,6* 3,* 3,*,*,* 8, 9,7*,,6* 3,* 3,* 2 11,*,* 9,7* 9,7*,6*,6* 3,* 3,*,*,* 9,7* 9,7*,6*,6* 3,* 3,* 16,8 22,9* 9, 14, 6, 9,* 3,7 6, 2,9 3,* 18, 22,9*, 14,6* 6,9 11,* 4, 8,* 3, 3,* 22, 22,9* 12, 14,6* 7,9 11,*, 8,* 3,* 3,* ,9* 22,9* 14,6* 14,6* 9,8 11,* 6,6 8,* 3,* 3,* 22,9* 22,9* 14,6* 14,6* 11,* 11,* 8, 8,* 3,* 3,* 16, 22,* 9, 14, 6, 9, 3,6 6, 2,7 3,7* 17, 22,* 9,8 16,7* 6,6 12,* 4, 9,6* 3, 3,7* 21, 22,* 11, 16,7* 7,8 12,*, 9,6* 3,7* 3,7* 22,* 22,* 14, 16,7* 9,6* 12,* 6,4 9,6* 3,7* 3,7* 22,* 22,* 16,7* 16,7* 11,4 12,* 8, 9,6* 3,7* 3,7* 16, 2,* 8,9 13,9*,4 8,9 3,,8 2,7 4,* 17,8 2,* 9,9 17,* 6, 12,4* 3,7 9,* 3, 4,* 21,4 2,* 11,7 17,* 7,4 12,4* 4,7 9,* 4, 4,* 2,* 2,* 14,4 17,* 9,4 12,4* 6, 9,* 4,* 4,* 2,* 2,* 17, 17,* 11,6 12,4* 7,8 9,* 4,* 4,* 14,8 26,7* 8, 14, 4,9 8,4 3,,6 3,,* 16,7 28,* 9, 17,*, 12,7* 3, 6,* 3,4,* 21, 28,* 11, 17,* 6,8 12,7* 4, 6,* 4,4,* 27,7* 28,* 14,8 17,* 8,9 12,7* 6, 6,*,*,* 28,* 28,* 17, 17,* 11, 12,7* 6,* 6,*,*,* , 27, 7,4 13, 4,4 8, 3,7 6,7* 16, 29,6* 8, 17,8*,,* 4, 6,7*,9 29,6*, 17,8* 6,4,*, 6,7* , 29,6* 13,9 17,8* 8,,* 6,7* 6,7* 29,6* 29,6* 17,8* 17,8*,*,* 6,7* 6,7* 13, 21,* 7,7 11,* 1,4 21,* 8,7 11,*, 21,* 11, 11,* ,* 21,* 11,* 11,* 21,* 21,* 11,* 11,* Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 48 without grab attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. 26,4 lb). With out the quick-change adapter, lift capacities will increase by up to 498 lb. A 9 C Litronic 21

22 Lift Capacities with Adjustable Up/Down Plus Offset Boom 11 EW-Undercarriage Stick 7 ft 1 ft ft 2 ft Stick 8 ft 1 ft ft 2 ft 2 8,4* 8,4*,*,* 8,4* 8,4*,*,* ,4* 8,4*,*,* 2 8* 8* 4* 4* 8* 8* 4* 4* 8* 8* 4* 4* 18 4,*,* 6,6 8,* 4,4* 4,4*,*,* 7, 8,* 4,4* 4,4* 21,*,* 8,* 8,* 4,4* 4,4* 9,* 9,* 6,7 8,* 4,* 4,* 9,* 9,* 7, 8,* 4,* 4,* ,* 9,* 8,* 8,* 4,* 4,* 1 13,8* 13,8*,* 13,* 6,8 9,7 4,* 4,* 13,8* 13,8* 11, 13,* 7,4,9* 4,* 4,* ,8* 13,8* 13, 13,* 8,4,9* 4,* 4,* 1,7 11,8* 6,8 9,7 4, 4,6* 3,8* 3,8* 11, 11,8* 7,,4* 4,6* 4,6* 3,8* 3,8* ,8* 11,8* 8,,4* 4,6* 4,6* 3,8* 3,8* 18, 24,*, 14,4* 6,7 9,4 4, 6, 3,7 4,* 19,7 24,* 11, 1,4* 7, 11,7* 4, 7,4* 4, 4,* ,* 24,* 12,6 1,4* 8,4 11,7*, 7,4* 4,* 4,* 18,4 24,*, 14, 6,7 9,4 4, 6, 3, 3,9*,* 24,* 11, 1,* 7,4 11,* 4,6 8,* 3,9* 3,9* , 24,* 12,7* 1,* 8,4 11,*,4 8,* 3,9* 3,9* 17,8 24,*, 14, 6,4 9, 3,9 6, 3,4 4,6* 19, 24,* 11, 17,* 7, 12,4* 4,4 9,4* 3,9 4,6* , 24,* 12, 17,* 8,* 12,4*, 9,4* 4,6* 4,6* 18, 23,9*, 13,9 6, 9, 4, 6,* 3, 4,* 19, 23,9*,7 16,9* 7, 12,* 4,4 9,7* 3,7 4,* , 23,9* 12,* 16,9* 8, 12,*,* 9,7* 4,* 4,* 17,9 26,7* 9,8 14, 6, 8,9 3,7,8 3,,* 19,8 26,7*,8 17,4* 6, 12,6* 4, 8,* 3,9,* ,6 26,7* 12,7 17,4* 7,6 12,6* 4,9 8,* 4,7,* 18, 2,9* 9,8 14,,9 9, 3,7,8 3, 4,6* 19, 2,9*,9 17,4* 6,6 12,* 4, 9,4* 3,8 4,6* ,8 2,9* 12, 17,4* 7,7 12,*, 9,4* 4, 4,6* 16,7 27,* 9, 13,8,4 8, 3,8 6, 18,9 28,8*, 17,8* 6, 12,6* 4, 6,* 23 23, 28,8* 12, 17,8* 7, 12,6*, 6,* 16,7 27,4* 9, 14,,4 8,4 3,6,6* 19, 28,6*, 17,7* 6, 12,7* 4,,6* , 28,6* 12, 17,7* 7, 12,7* 4,9,6* 16, 27,6 8, 13,, 8, 4,8 7,* 18,4 29,8* 9, 17,*,7 8,6*,4 7,* 8 22, 29,8* 11, 17,* 6,8 8,6* 6, 7,* 16, 27,7 8, 13,, 8, 4, 7, 18, 29,9* 9, 17,6*,7 9,7*, 7,* 21 22,6 29,9* 11, 17,6* 6,8 9,7* 6, 7,* 1 1 1,4 18,* 12,9 1,* 17,6 18,* 14,7 1,* ,* 18,* 1,* 1,* Stick 8 8 ft 1 ft ft 2 ft,8*,8*,8*,8* 11 7,8*,8* 2 8,* 8,* 4,* 4,* 8,* 8,* 4,* 4,* ,* 8,* 4,* 4,* 8,7* 8,7* 6,8 7,8* 3,6* 3,6* 8,7* 8,7* 7,4* 7,8* 3,6* 3,6* 23 8,7* 8,7* 7,8* 7,8* 3,6* 3,6* 1,4,* 6,9 9,6 4,,6* 3,* 3,*,*,* 7, 9,7* 4,7,6* 3,* 3,* 2 11,*,* 8, 9,7*,,6* 3,* 3,* 18, 22,9*, 14, 6,8 9,* 4, 6, 3, 3,*,4 22,9* 11, 14,6* 7,4 11,* 4,6 8,* 3,* 3,* ,9* 22,9* 12,6 14,6* 8, 11,*,4 8,* 3,* 3,* 17, 22,* 9,8 14, 6,6 9, 4, 6, 3, 3,7* 19,4 22,*,8 16,7* 7,* 12,* 4, 9,6* 3, 3,7* ,* 22,* 12, 16,7* 8, 12,*, 9,6* 3,7* 3,7* 17,8 2,* 9,9 13,9* 6, 8,9 3,7,9 3, 4,* 19,7 2,*,9 17,* 6,7 12,4* 4, 9,* 3,6 4,* ,9 2,* 12,4 17,* 7,8 12,4*, 9,* 4,* 4,* 1 16,8 26,7 9, 14,, 8,4 3,,6 3,4,* 19, 28,*, 17,* 6, 12,7* 4, 6,* 3,9,* , 28,* 12, 17,* 7, 12,7* 4,8 6,* 4,7,* 16, 27,6 8, 13,, 8, 4, 6,7* 18,4 29,6* 9, 17,8*,7,* 4,7 6,7* , 29,6* 11, 17,8* 6,8,*,7 6,7* 1,4 21,* 8,7 11,* 17,6 21,* 9,8 11,* ,* 21,* 11,* 11,* Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 48 without grab attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. 26,4 lb). With out the quick-change adapter, lift capacities will increase by up to 498 lb. 22 A 9 C Litronic

23 Backhoe Attachment with Adjustable Offset Boom 16 1 ft 2 1 m Digging Envelope with Quick Change Adapter 4 6 Stick length ft in Max. digging depth ft in Max. reach at ground level ft in Max. dumping height ft in Max. teeth height ft in stick 7 2 stick 8 3 stick 8 8 at max. attachment offset with vertical ditch walls stick 7 stick 8 6 stick 8 8 with set straight boom m Digging Forces 4 6 Max. digging force lbf 17,62 16,91 1,669 lb 17,637 16,3 1,63 Max. breakout force lbf 24,347 24,347 24,347 lb 24,21 24,21 24,21 Max. breakout force with ripper bucket 28,29 lbf (28,219 lb) Max. possible digging force (stick 7 ) 22,616 lbf (22,78 lb) 2 1 ft Operating 7 The operating weight includes the basic machine with 8 tires plus spacer rings, adjustable offset boom 16 1, stick 7, quick change adapter 48 and bucket 33. /.6 yd 3. Undercarriage versions 7 A 9 C litronic` with stabilizer blade A 9 C litronic` with 2 pt. outriggers A 9 C litronic` with stabilizer blade + 2 pt. outriggers A 9 C litronic` with 4 pt. outriggers A 9 C EW litronic` with stabilizer blade A 9 C EW litronic` with 2 pt. outriggers 37,7 lb 37,7 lb 4, lb 4,8 lb 37,9 lb 37,9 lb Buckets Machine stability per ISO 67* (7 % of tipping capacity) Cutting width Capacity ISO 741 1) Stabilizers Stabilizer 2 point Stabilizer blade 4 point EW stabilizers EW stabilizer EW 2 point raised blade down outriggers + 2 pt. outr. outriggers raised blade down outriggers down down down down Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) in yd 3 lb ,683 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,728 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 33..6,882 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,36 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,146 V V V Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) Max. material weight Y = 3,34 lb/yd 3, V = 2,28 lb/yd 3, y = 2,23 lb/yd 3, v = A 9 C Litronic 23

24 Lift Capacities with Adjustable Offset Boom 16 1 Stick 7 ft 1 ft ft 2 ft Stick 8 ft 1 ft ft 2 ft ,* 4,* 4,* 4,* 4,* 4,* 19 4,* 4,* 4,* 4,* 9,,8*,7 9,* 4,* 4,*,,8* 6, 9,* 4,* 4,*,8*,8* 7,7 9,* 4,* 4,* 22 9,8*,8* 9,* 9,* 4,* 4,*,8*,8* 9,* 9,* 4,* 4,* 1,4,7* 8,4 13,*,4 8,9 3,8 4,* 17,,7* 9, 13,* 6,,8* 4,* 4,*,7*,7* 11, 13,* 7,,8* 4,* 4,* 24 3,7*,7* 13,* 13,* 9,4,8* 4,* 4,*,7*,7* 13,* 13,*,8*,8* 4,* 4,* 12,8 13,7* 7, 13, 4,9 8, 3,6 4,7* 13,7* 13,7* 8,4 16,*, 12,* 4, 4,7* 13,7* 13,7*, 16,* 6,9 12,* 4,7* 4,7* ,7* 13,7* 13,8 16,* 8,9 12,* 4,7* 4,7* 13,7* 13,7* 16,* 16,* 11, 12,* 4,7* 4,7* 12, 1,6* 6,9 12,4 4,6 8, 3,6,6* 14, 1,6* 7,8 17,6*, 12,7* 4,,6* 1,6* 1,6* 9,8 17,6* 6, 12,7*,,6* ,6* 1,6* 13, 17,6* 8,6 12,7*,6*,6* 1,6* 1,6* 17, 17,6*,9 12,7*,6*,6* 12, 22,4* 6,7 12, 4, 8, 4, 7, 14, 22,4* 7,6 17,*, 12,4* 4, 7,4* 18, 22,4* 9,7 17,* 6,4 12,4*,7 7,4* ,4* 22,4* 12,9 17,* 8, 12,4* 7,4* 7,4* 22,4* 22,4* 16,9 17,*,8 12,4* 7,4* 7,4* 12,7 21,* 6,9 12,4, 9, 14, 21,* 7,8 14,6*,9 11,* 19, 21,* 9,9 14,6* 7,4 11,* 18 21,* 21,* 13, 14,6* 9,7 11,* 21,* 21,* 14,6* 14,6* 11,* 11,* ,* 4,* 4,* 4,* 4,* 4,* 1 8 4,* 4,* 4,* 4,*,*,* 3,8* 3,8*,*,* 3,8* 3,8*,*,* 3,8* 3,8* 7,*,* 3,8* 3,8*,*,* 3,8* 3,8* 9,4,*,8 9,* 3,7* 3,7*,*,* 6,4 9,* 3,7* 3,7*,*,* 7,7 9,* 3,7* 3,7* 23,*,* 9,* 9,* 3,7* 3,7*,*,* 9,* 9,* 3,7* 3,7* 1,7 19,* 8, 13,*,4 8,9 3,7 3,8* 17,6 19,* 9,4 13,* 6,,* 3,8* 3,8* 19,* 19,* 11,6 13,* 7,,* 3,8* 3,8* 24 19,* 19,* 13,* 13,* 9,4,* 3,8* 3,8* 19,* 19,* 13,* 13,*,*,* 3,8* 3,8* 13, 1,8* 7, 13, 4,9 8, 3,4,* 3,4 4,* 14,8 1,8* 8,4 1,9*, 11,8* 3,9,* 3,8 4,* 1,8* 1,8*, 1,9* 6,9 11,8* 4,8,* 4,* 4,* 2 3 1,8* 1,8* 13,8 1,9* 8,9 11,8*,*,* 4,* 4,* 1,8* 1,8* 1,9* 1,9* 11, 11,8*,*,* 4,* 4,* 12, 1,7* 6,9 12,4 4,6 8, 3,4 4,9* 14, 1,7* 7,8 17,*, 12,6* 3,8 4,9* 1,7* 1,7* 9,8 17,* 6, 12,6* 4,8 4,9* ,7* 1,7* 13, 17,* 8,6 12,6* 4,9* 4,9* 1,7* 1,7* 17, 17,*,9 12,6* 4,9* 4,9* 12, 21,4* 6,7 12, 4, 7,9 3,8 6,4* 14, 21,4* 7, 17,*, 12,4* 4, 6,4* 18,4 21,4* 9,6 17,* 6,4 12,4*,4 6,4* ,4* 21,4* 12,9 17,* 8,4 12,4* 6,4* 6,4* 21,4* 21,4* 16,8 17,*,8 12,4* 6,4* 6,4* 12,6 22,* 6,8 12, 4,8 8, 14,4 22,* 7,7 1,*,4,* 18,8 22,* 9,7 1,* 6,8,* ,* 22,* 13, 1,* 9,,* 22,* 22,* 1,* 1,*,*,* Stick 8 8 ft 1 ft ft 2 ft ,9* 3,9* 3,9* 3,9* 3,9* 3,9* ,9* 3,9* 3,9* 3,9*,6*,6* 3,* 3,*,6*,6* 3,* 3,*,6*,6* 3,* 3,* 21 4,6*,6* 3,* 3,*,6*,6* 3,* 3,*,8 8,6* 3,* 3,* 6,4 8,6* 3,* 3,* 7,8 8,6* 3,* 3,* ,6* 8,6* 3,* 3,* 8,6* 8,6* 3,* 3,* 16, 18,* 8,6 12,4*,4 9, 3,6 4,8* 3,* 3,* 18, 18,* 9, 12,4* 6,,* 4, 4,8* 3,* 3,* 18,* 18,* 11,6 12,4* 7,,* 4,8* 4,8* 3,* 3,* ,* 18,* 12,4* 12,4* 9,4,* 4,8* 4,8* 3,* 3,* 18,* 18,* 12,4* 12,4*,*,* 4,8* 4,8* 3,* 3,* 13, 18,* 7, 13, 4,9 8, 3,4 6, 3, 3,8* 1, 18,* 8,4 1,*, 11,* 3,9 6,* 3,6 3,8* 18,* 18,*, 1,* 6,9 11,* 4,8 6,* 3,8* 3,8* 2 18,* 18,* 13,9 1,* 8,9 11,* 6,* 6,* 3,8* 3,8* 18,* 18,* 1,* 1,* 11, 11,* 6,* 6,* 3,8* 3,8* 12, 1,9* 6,9 12,4 4,6 8, 3,,* 3, 4,4* 13,9 1,9* 7,7 17,*, 12,* 3,7,* 3,7 4,4* 1,9* 1,9* 9,8 17,* 6, 12,* 4,7,* 4,4* 4,4* 2 2 1,9* 1,9* 13, 17,* 8, 12,*,*,* 4,4* 4,4* 1,9* 1,9* 17, 17,*,9 12,*,*,* 4,4* 4,4* 12,,7* 6,6 12, 4,4 7,9 3,6,6* 13,8,7* 7, 17,*, 12,* 4,,6* 18,,7* 9, 17,* 6, 12,*,,6* 23 4,7*,7* 12,8 17,* 8, 12,*,6*,6*,7*,7* 16,8 17,*,7 12,*,6*,6* 12,4 22,8* 6,7 12, 4, 8, 4, 7,9 14, 22,8* 7,6 1,4*, 9,7*, 8,7* 18,6 22,8* 9,6 1,4* 6,4 9,7* 6,4 8,7* 1 22,8* 22,8* 12,9 1,4* 8, 9,7* 8,4 8,7* 22,8* 22,8* 1,4* 1,4* 9,7* 9,7* 8,7* 8,7* Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 48 without grab attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. 26,4 lb). Without the quick-change adapter, lift capacities will increase by up to 498 lb. 24 A 9 C Litronic

25 Lift Capacities with Adjustable Offset Boom 16 1 EW-Undercarriage Stick 7 ft 1 ft ft 2 ft Stick 8 ft 1 ft ft 2 ft 2 2 4,* 4,* 4,* 4,* 1 8 4,* 4,* 4,* 4,* 4,* 4,* 19 4,* 4,*,*,* 3,8* 3,8*,*,* 3,8* 3,8* 7,*,* 3,8* 3,8* 1,,8* 6, 9,* 4,* 4,*,8*,8* 7, 9,* 4,* 4,* 22 9,8*,8* 8, 9,* 4,* 4,* 1,*,* 6,4 9,* 3,7* 3,7*,*,* 7, 9,* 3,7* 3,7* 23,*,* 8, 9,* 3,7* 3,7* 17,,7* 9, 13,* 6, 9, 4,* 4,* 19,,7*,4 13,* 6,6,8* 4,* 4,* 24 3,7*,7* 12, 13,* 7,7,8* 4,* 4,* 17,6 19,* 9,4 13,* 6, 9, 3,8* 3,8* 19,* 19,*,4 13,* 6,6,* 3,8* 3,8* 24 19,* 19,* 12, 13,* 7,7,* 3,8* 3,8* 13,7* 13,7* 8,4 13,, 8, 4, 4,7* 13,7* 13,7* 9,4 16,* 6, 12,* 4, 4,7* ,7* 13,7* 11, 16,* 7, 12,* 4,7* 4,7* 14,8 1,8* 8,4 13,, 8, 3,9,* 3,8 4,* 1,8* 1,8* 9,4 1,9* 6, 11,8* 4,,* 4,* 4,* 2 3 1,8* 1,8* 11, 1,9* 7, 11,8*,*,* 4,* 4,* 14, 1,6* 7,8 12,, 8, 4,,6* 1,6* 1,6* 8,8 17,6*,9 12,7* 4,,6* ,6* 1,6*, 17,6* 6,9 12,7*,4,6* 14, 1,7* 7,8 12,4, 8, 3,8 4,9* 1,7* 1,7* 8,7 17,*,8 12,6* 4, 4,9* ,7* 1,7*,4 17,* 6,9 12,6* 4,9* 4,9* 14, 22,4* 7,6 12,, 8, 4, 7, 16, 22,4* 8,6 17,*,7 12,4*, 7,4* 21 11, 22,4*, 17,* 6,8 12,4* 6, 7,4* 14, 21,4* 7, 12,, 8, 4, 6,4* 16, 21,4* 8, 17,*,7 12,4* 4,8 6,4* ,8 21,4*, 17,* 6,7 12,4*,7 6,4* 14, 21,* 7,8 12,,9 9, 16,6 21,* 8,8 14,6* 6,6 11,* 18, 21,*, 14,6* 7,8 11,* 14,4 22,* 7,7 12,4,4 8, 16,4 22,* 8,7 1,* 6,,* 19 3, 22,*,4 1,* 7,,* 1 1 Stick 8 8 ft 1 ft ft 2 ft 2 3,9* 3,9* 3,9* 3,9* ,9* 3,9*,6*,6* 3,* 3,*,6*,6* 3,* 3,* 21 4,6*,6* 3,* 3,* 1 6,4 8,6* 3,* 3,* 7, 8,6* 3,* 3,* , 8,6* 3,* 3,* 18, 18,* 9, 12,4* 6, 9, 4, 4,8* 3,* 3,* 18,* 18,*, 12,4* 6,6,* 4, 4,8* 3,* 3,* ,* 18,* 12, 12,4* 7,7,* 4,8* 4,8* 3,* 3,* 1, 18,* 8,4 13,, 8, 3,9 6, 3,6 3,8* 17, 18,* 9,4 1,* 6, 11,* 4, 6,* 3,8* 3,8* 2 18,* 18,* 11, 1,* 7, 11,*, 6,* 3,8* 3,8* 13,9 1,9* 7,7 12,4, 8, 3,7,* 3,7 4,4* 1,9* 1,9* 8,7 17,*,8 12,* 4,,* 4, 4,4* 2 2 1,9* 1,9*,4 17,* 6,9 12,* 4,9,* 4,4* 4,4* 13,8,7* 7, 12,, 7,9 4,,6* 1,9,7* 8,4 17,*,6 12,* 4,,6* ,6,7*, 17,* 6,7 12,*,4,6* 14, 22,8* 7,6 12,, 8,, 8, 16, 22,8* 8, 1,4*,7 9,7*,7 8,7* 1, 22,8*, 1,4* 6,8 9,7* 6,7 8,7* 1 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 48 without grab attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. 26,4 lb). Without the quick-change adapter, lift capacities will increase by up to 498 lb. A 9 C Litronic 2

26 Clamshell Attachment with Hydr. Adjustable Boom 11 ft 2 m Digging Envelope with Quick Change Adapter Stick length ft in Max. digging depth ft in Max. reach at ground level ft in Max. dumping height ft in Clamshell Model 8 B Max. tooth force Max. torque of hydr. swivel Operating 11,69 lbf (11,684 lb) 1,33 lbf ft The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable boom 11, stick 7, quick change adapter 48 and clamshell model B/.9 yd 3. Undercarriage versions m A 9 C litronic` with stabilizer blade A 9 C litronic` with 2 pt. outriggers A 9 C litronic` with stabilizer blade + 2 pt. outriggers A 9 C litronic` with 4 pt. outriggers A 9 C EW litronic` with stabilizer blade A 9 C EW litronic` with 2 pt. outriggers 39, lb 39, lb 41,4 lb 42, lb 39, lb 39, lb 2 1 ft Clamshell Model 8 B Machine stability per ISO 67* (7 % of tipping capacity) Width of shells Capacity Stabilizers Stabilizer 2 point Stabilizer blade 4 point EW stabilizers EW stabilizer EW 2 point raised blade down outriggers + 2 pt. outr. outriggers raised blade down outriggers down down down down Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) in yd 3 lb ).22 1,6 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1.7 1).29 1,63 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ).39 1,63 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 31. 1).2 1,764 Y Y Y Y Y Y V Y Y Y V Y Y Y V Y Y Y Y Y Y Y Y Y ) 1. 1,984 y v v V y y v Y Y v v Y y v v y y y Y V y Y V y ).22 1,676 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1.7 2).29 1,786 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ).39 1,8 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 31. 2).2 1,962 Y Y Y Y Y Y y Y Y Y y Y Y Y y Y Y Y Y Y Y Y Y Y * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) without ejector 2) with ejector Max. material weight Y = 3,34 lb/yd 3, V = 2,28 lb/yd 3, y = 2,23 lb/yd 3, v = 26 A 9 C Litronic

27 Clamshell Attachment with Hydr. Adjustable Boom 11 ft 2 m Digging Envelope with Quick Change Adapter Stick length ft in Max. digging depth ft in Max. reach at ground level ft in Max. dumping height ft in Clamshell Model B Max. tooth force Max. torque of hydr. swivel Operating 16,411 lbf (16,314 lb) 1,298 lbf ft The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable boom 11, stick 7, quick change adapter 48 and clamshell model B/.9 yd 3. Undercarriage versions m A 9 C litronic` with stabilizer blade A 9 C litronic` with 2 pt. outriggers A 9 C litronic` with stabilizer blade + 2 pt. outriggers A 9 C litronic` with 4 pt. outriggers A 9 C EW litronic` with stabilizer blade A 9 C EW litronic` with 2 pt. outriggers 39, lb 39, lb 41,4 lb 42, lb 39, lb 39, lb 2 1 ft Clamshell Model B Machine stability per ISO 67* (7 % of tipping capacity) Width of shells Capacity Stabilizers Stabilizer 2 point Stabilizer blade 4 point EW stabilizers EW stabilizer EW 2 point raised blade down outriggers + 2 pt. outr. outriggers raised blade down outriggers down down down down Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) in yd 3 lb ).22 1,698 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1.7 1).29 1,88 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ).46 1,896 Y Y Y Y Y Y V Y Y Y V Y Y Y V Y Y Y Y Y Y Y Y Y 31. 1).9 2,6 Y Y Y Y Y Y y Y Y Y y Y Y Y y Y Y Y Y Y Y Y Y Y ).78 2,138 V y y Y Y V v Y Y y v Y V y v Y V V Y Y V Y Y V ) ,293 v v v v v v v V y v v V v v v v v v y v v y v v ).22 1,88 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1.7 2).29 1,94 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ).46 2,94 Y Y Y Y Y Y y Y Y Y y Y Y Y y Y Y Y Y Y Y Y Y Y 31. 2).9 2,227 Y Y V Y Y Y v Y Y V v Y Y V v Y Y Y Y Y Y Y Y Y * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) without ejector 2) with ejector Max. material weight Y = 3,34 lb/yd 3, V = 2,28 lb/yd 3, y = 2,23 lb/yd 3, v = A 9 C Litronic 27

28 Clamshell Attachment with Gooseneck Boom 16 ft m m 2 1 ft Digging Envelope with Quick Change Adapter Stick length ft in Max. digging depth ft in Max. reach at ground level ft in Max. dumping height ft in Clamshell Model 8 B B Max. tooth force 11,69 lbf 16,411 lbf (11,684 lb) (16,314 lb) Max. torque of hydr. swivel 1,33 lbf ft 1,298 lbf ft Operating The operating weight includes the basic machine with 8 tires plus spacer rings, gooseneck boom 16, stick 7, quick change adapter 48 and clamshell model B/.9 yd 3. Undercarriage versions A 9 C litronic` with stabilizer blade A 9 C litronic` with 2 pt. outriggers A 9 C litronic` with stabilizer blade + 2 pt. outriggers A 9 C litronic` with 4 pt. outriggers A 9 C EW litronic` with stabilizer blade A 9 C EW litronic` with 2 pt. outriggers 38, lb 38, lb 4, lb 41, lb 38, lb 38, lb Clamshell Machine stability per ISO 67* (7 % of tipping capacity) Width of shells Capacity Stabilizers Stabilizer 2 point Stabilizer blade 4 point EW stabilizers EW stabilizer EW 2 point raised blade down outriggers down + 2 pt. outr. down outriggers down raised blade down outriggers down Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) in yd 3 lb Clamshell Model 8 B ).22 1,6 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1.7 1).29 1,63 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ).39 1,63 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 31. 1).2 1,764 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ) 1. 1,984 y y v V V v Y V y Y V y Y V y V V y Y V y Y V y ).22 1,676 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1.7 2).29 1,786 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ).39 1,8 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 31. 2).2 1,962 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Clamshell Model B ).22 1,698 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1.7 1).29 1,88 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ).46 1,896 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 31. 1).9 2,6 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ).78 2,138 V V V Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ) ,293 v v v v y v y y v y y v y y v v y v y y v y y v ).22 1,88 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1.7 2).29 1,94 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ).46 2,94 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 31. 2).9 2,227 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) without ejector 2) with ejector Max. material weight Y = 3,34 lb/yd 3, V = 2,28 lb/yd 3, y = 2,23 lb/yd 3, v = 28 A 9 C Litronic

29 Ditchcleaning Attachment with Hydr. Adjustable Boom 11 ft m m Digging Envelope with Quick Change Adapter Stick length ft in Max. digging depth ft in Max. reach at ground level ft in Max. dumping height ft in Max. teeth height ft in Operating The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable boom 11, stick 7, quick change adapter 48 and ditchcleaning bucket 78.7 /.6 yd 3. Undercarriage versions A 9 C litronic` with stabilizer blade A 9 C litronic` with 2 pt. outriggers A 9 C litronic` with stabilizer blade + 2 pt. outriggers A 9 C litronic` with 4 pt. outriggers A 9 C EW litronic` with stabilizer blade A 9 C EW litronic` with 2 pt. outriggers 37,8 lb 37,8 lb 4, lb 4,9 lb 38, lb 38, lb 2 1 ft Ditchcleaning Buckets Machine stability per ISO 67* (7 % of tipping capacity) Cutting width Capacity ISO 741 1) Stabilizers Stabilizer 2 point Stabilizer blade 4 point EW stabilizers EW stabilizer EW 2 point raised blade down outriggers + 2 pt. outr. outriggers raised blade down outriggers down down down down Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) in yd 3 lb ,617 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,728 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,794 Y Y Y Y Y Y V Y Y Y V Y Y Y V Y Y Y Y Y Y Y Y Y 63. 2) 1. 1,7 y y v V V y v Y Y y v Y V y v V y V Y V V Y V V ).6 1,433 Y Y Y Y Y Y V Y Y Y V Y Y Y V Y Y Y Y Y Y Y Y Y ).92 1,79 V y y Y Y V v Y Y y v Y V y v Y V V Y Y V Y Y V * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) with 2 x rotator Y V y v = 3,34 lb/yd 3 max. material weight = 2,28 lb/yd 3 max. material weight = 2,23 lb/yd 3 max. material weight = A 9 C Litronic 29

30 Ditchcleaning Attachment with Gooseneck Boom 16 ft m Digging Envelope with Quick Change Adapter Stick length ft in Max. digging depth ft in Max. reach at ground level ft in Max. dumping height ft in Max. teeth height ft in Operating The operating weight includes the basic machine with 8 tires plus spacer rings, gooseneck boom 16, stick 7, quick change adapter 48 and ditchcleaning bucket 78.7 /.6 yd 3. Undercarriage versions A 9 C litronic` with stabilizer blade A 9 C litronic` with 2 pt. outriggers A 9 C litronic` with stabilizer blade + 2 pt. outriggers A 9 C litronic` with 4 pt. outriggers A 9 C EW litronic` with stabilizer blade A 9 C EW litronic` with 2 pt. outriggers 36,8 lb 36,8 lb 39, lb 39,8 lb 37, lb 37, lb m 2 1 ft Ditchcleaning Buckets Machine stability per ISO 67* (7 % of tipping capacity) Cutting width Capacity ISO 741 1) Stabilizers Stabilizer 2 point Stabilizer blade 4 point EW stabilizers EW stabilizer EW 2 point raised blade down outriggers + 2 pt. outr. outriggers raised blade down outriggers down down down down Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) Stick length (ft in) in yd 3 lb ,617 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,728 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ,794 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 63. 2) 1. 1,7 y y y V Y V Y Y V Y Y V Y Y V V Y V Y Y V Y Y V ).6 1,433 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ).92 1,79 V V y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) with 2 x rotator Y V y v = 3,34 lb/yd 3 max. material weight = 2,28 lb/yd 3 max. material weight = 2,23 lb/yd 3 max. material weight = A 9 C Litronic

31 Equipment Undercarriage S O Two circuit travel brake with accumulator Travel motor protection Outrigger cylinder rod guards Creeper speed electrically switchable from cab New tires Service free parking brake Independent outrigger control Choice of tires Auto check valve directly on each stabilizer cylinder Proportional power steering with mechanical back up Customized colors Two lockable storage boxes Lockable storage box additional Two-speed power shift transmission Uppercarriage S O Electric fuel tank filler pump Maintenance-free swing brake lock Handrails, Non slip surfaces Main switch for electric circuit Engine hood with lift assistance Pedal controlled positioning swing brake Reverse travel warning system Sound insulation Customized colors Pin lock upper/lower Maintenance-free HD-batteries Extended tool kit Lockable tool box Tool kit Hydraulics S O Hydraulic tank shut-off valve Extra hydr. control for hydr. swivel Pressure compensation Hook up for pressure checks Pressure storage for controlled lowering of attachments with engine turned off Filter with partial micro filtration ( µm) Electronic pump regulation Step less mode system (ECO) Flow compensation Four mixed modes, can also be adjusted Full flow micro filtration Bio degradable hydraulic oil Pressure compensation Flow summation Tool Control Additional hydraulic circuits Operator s Cab S O Storage tray Displays for engine operating condition Mechanical hour meters, readable from outside the cab Roof hatch Adjustable roof vent 6-way adjustable seat Air pressure operator seat with heating and head-rest Seat and consoles independently adjustable Extinguisher Removable customized foot mat Dome light Cab heater with defroster Coat hook Air conditioning Electric cool box Adjustable steering wheel Bullet proof window (fixed installation can not be opened) Radio stereo Radio installation Rain hood over front window opening Beacon Tinted windows Door with sliding window Optical and acoustical warning if outriggers are not fully retracted Auxiliary heating Sun shade Sun blinds Electronic theft protection Wiper blades Cigarette lighter and ashtray Additional flood lights Attachment S O Flood lights on boom Hydr. lines for clam operation Sealed pivots Safety lift hook on hoe buckets Liebherr line of clams Liebherr semi-automatic central lubrication system Liebherr fully-automatic central lubrication system Likufix Safety check valves on hoist cylinder Safety check valves on stick cylinder Hose quick connection Hydraulic or manual quick change tool adapter Customized colors Special buckets and other tools Overload warning device Two way valves for bucket/clam use Locking of connections for clam operation Cylinders with shock absorber Engine S O Turbo charger Unit pump system Cold start aid Sensor controlled engine idling Air filter with pre-cleaner main- and safety element S = Standard, O = Option Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr to retain warranty. All illustrations and data may differ from standard equipment. Subject to change without notice. A 9 C Litronic 31

32 The Liebherr Group of Companies Wide product range The Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr s highvalue products and services enjoy a high reputation in many other fields, too. The wide range includes domes - tic appliances, aerospace and transportation systems, machine tools and maritime cranes. Exceptional customer benefit Every product line provides a complete range of models in many different versions. With both its technical excellence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical application. State-of-the-art technology To provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manu factured inhouse, for instance the entire drive and control techno - logy for construction equipment. Worldwide and independent Hans Liebherr founded the Liebherr family company in Since that time, the enterprise has steadily grown to a Group of companies with over, employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the com pany. Printed in Germany by Geiselmann RG-BK-RP LHB/VF Liebherr Construction Equipment Co. 4 Chestnut Avenue, Newport News, VA 2367, USA (7 7) , Fax (7 7) info.lce@liebherr.com