Wheeled Excavator A 920
|
|
- Laura Pope
- 6 years ago
- Views:
Transcription
1 Wheeled Excavator A 9 litronic` Operating Weight: 8,, kg Engine: 9 kw / 7 HP Stage I Bucket Capacit:..
2 Technical Data Diesel Engine Rating per ISO 99 Model Tpe Bore / Stroke Displaceent Engine operation Air cleaner Engine idling Electrical sste oltage Batteries Alternator Stage I Harful eissions values Eission control Option Fuel tank Urea tank Hdraulic Sste 9 kw (7 HP) at,7 RPM Liebherr D9 clinder in-line / l -stroke diesel Coon-Rail turbo-charged and after-cooler reduced eissions dr-tpe air cleaner with pre-cleaner, priar and safet eleents sensor controlled Hdraulic pup for attachent and travel drive Max. flow Max. pressure Hdraulic pup regulation and control x Ah / three-phase current 8 / A MODE selection in accordance with 97/68/EG stage I Liebherr-SCR technolog Liebherr particle filter 69 l 6 l Hdraulic tank Hdraulic sste Hdraulic oil filter S (Sensitive) E (Eco) P (Power) P (Power-Plus) Cooling Sste Diesel engine water-cooled copact cooling sste consisting cooling unit for water, hdraulic oil and charge air with stepless therostaticall controlled fan, fans for radiator cleaning, can be copletel folded awa Engine speed and perforance setting Option Liebherr axial piston variable displaceent pup 9 l/in. bar Liebherr-Snchron-Cofort-sste (LSC) with electronic engine speed sensing regulation, pressure and flow copensation, torque controlled swing drive priorit l ax. l ain return filter with integrated partial icro filtration ( µ) adjustent of engine and hdraulic perforance via a ode pre-selector to atch application, e.g. for especiall econoical and environentall friendl operation or for axiu digging perforance and heav-dut jobs ode for precision work and lifting through ver sensitive oveents ode for especiall econoical and environentall friendl operation ode for high perforance with low fuel consuption ode for highest perforance and for ver heav dut applications, suitable for continuous operation stepless alignent of engine output and hdraulic power via engine speed Tool Control: ten preadjustable pup flows and pressures for add on tools Swing Drive Drive Hdraulic Controls Power distribution Servo circuit Attachent and swing Chassis Additional functions Proportional control A 9 Litronic via control valves with integrated safet valves, siultaneous and independent actuation of chassis, swing drive and attachent with hdraulic pilot control and proportional jostick levers electroproportional via foot pedal via switch or electroproportional foot pedals proportionall acting transitters on the josticks for additional hdraulic functions Swing ring Swing speed Swing torque Holding brake Option Liebherr axial piston otor with integrated brake valve and torque control Liebherr, sealed race ball bearing swing ring, internal teeth RPM stepless kn wet ulti-disc (spring applied, pressure released) pedal controlled positioning swing brake
3 Operator s Cab Cab Operator s seat Standard Operator s seat Cofort (Option) Operator s seat Preiu (Option) Control sste Operation and displas Air-conditioning ROPS safet cab structure (roll-over protection sste) with individual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a sliding window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddaping insulating, tinted lainated safet glass, separate window shades for the sunroof window and windscreen air cushioned operator s seat with D-adjustable arrests, headrest, lap belt, seat heater, anual weight adjustent, adjustable seat cushion inclination and length and echanical lubar vertebrae support in addition to operator s seat standard: lockable horizontal suspension, autoatic weight adjustent, adjustable suspension stiffness, pneuatic lubar vertebrae support and passive seat cliatisation with active coal in addition to operator s seat cofort: active electronic weight adjustent (autoatic readjustent), pneuatic low frequenc suspension and active seat cliatisation with active coal and ventilator josticks with ar consoles and swivel seat, folding left ar console large high-resolution operating unit, selfexplanator, colour displa with touchscreen, video-copatible, nuerous setting, control and onitoring options, e.g. air conditioning control, fuel consuption, achine and tool paraeters autoatic air-conditioning, recirculated air function, fast de-icing and deisting at the press of a button, air vents can be operated via a enu; recirculated air and fresh air filters can be easil replaced and are accessible fro the outside; heating-cooling unit, designed for extree outside teperatures, sensors for solar radiation, inside and outside teperatures (countr-dependent) Drive Pulling force Travel speed Driving operation Axles Service brake Autoatic digging brake Holding brake Stabilization Option oversized two speed power shift transission with additional creeper speed, Liebherr axial piston otor with functional brake valve on both sides 7 kn k/h stepless (creeper speed off-road) 7. k/h stepless (off-road) k/h stepless (creeper speed on-road). k/h stepless (road travel) ax. or. k/h Speeder (Option) autootive driving using accelerator pedal, cruise control function: storage of variable accelerator pedal positions, both off-road and on-road anual or autoatic hdraulicall controlled front axle oscillation lock two circuit travel brake sste with accuulator; wet and backlash-free disc brake works autoaticall when driving off (accelerator pedal actuation) and when the achine is stationar (engageent); the digging brake engages autoaticall can be coupled with autoatic swing axle lock wet ulti-disc (spring applied, pressure released) stabilizing blade (adjustable during travel for dozing) stabilizing blade rear stabilizing blade front point outriggers rear point outriggers -undercarriage / 9' Attachent Tpe Hdraulic clinders Bearings high-strength steel plates at highlstressed points for the toughest requireents. Coplex and stable ountings of attachent and clinders Liebherr clinders with special seal sste as well as shock absorption sealed, low aintenance Coplete Machine Lubrication Noise eission ISO 696 //EC Liebherr central lubrication sste for uppercarriage and attachent, autoaticall L pa (inside cab) = 7 db(a) LWA (surround noise) = db(a) A 9 Litronic
4 Diensions D A E 9 W C H K I J M Q H M L T U B = B B* = B* X 9 J I H6 M M T B = B L T U B* = B* B 9 H7 M T M L U6 A 9 Litronic B = B T B* = B* B
5 A B B* B B B* C D E H I I J J K L M M Q T T T T U U U6 * - E = Tail radius Tres.-,,,7,69,,7,6,8,8,9 6 9,,7,,,,,9,6,7,,8 Stick Two-piece boo Stabilizer Blade pt. blade pt. outriggers outriggers 6,7 6,7 6,7 6, 6, 6, 6, 6,7* 6,,7 6,*,9* W,,,,,,,,*,,,*,* X 9, 9, 9, 9, 9, 9, 9, 9,6* 9, 9, 9,6* 9,* Mono boo Stabilizer Blade blade pt. outriggers 6, 6,*,6 6,*,6 6,*,9) ) 6,*) ),,*,,*,,*,),*) 8,8 9,* 8,8 9,* 8,8 9,* 8,8) 9,*) pt. outriggers 6,,8*,7* 6,*) ),,*,*,*) 8,8 8,9* 9,* 9,*) Stick Offset two-piece boo Stabilizer Blade pt. blade pt. outriggers outriggers 6,6 6,6 6,6 6, 6, 6, 6, 6, 6,,7 6,*,8* W,,,,,,,,,,,*, X 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,6* 9,* Diensions are with attachent over steering axle * Attachent over digging axle for shorter transport diensions ) without backhoe bucket ) Tipping clinder retracted W = Max. ground clearance including approx. piping A 9 Litronic
6 Backhoe Bucket with Two-Piece Boo ft H Digging Forces without quick coupler Max. digging force (ISO 6) Max. breakout force (ISO 6) 9 Max. breakout force with ripper bucket - The operating weight includes the basic achine with 8 tres plus interediate rings, t wo-piece boo, stick, quick coupler SW8 and bucket, / versions A 9 litronic` with stabilizer blade A 9 litronic` with stabilizer blade pt. outriggers A 9 litronic` with pt. outriggers A 9 litronic` with stabilizer blade A 9 litronic` with stabilizer blade pt. outriggers kn t kn t 6.9 kn (6. t) Operating Weight Digging Envelope with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height Min. attachent radius Weight (kg) 8,9,8,8 9,,9 ft point outriggers pt. outriggers Weight Capacit ISO 7) Cutting width Buckets Machine stabilit per ISO 67* (7 % of tipping capacit) pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg 6). 8).6,).8 6,). 7,). 79 6). 7 8).6 6,).8 7,). 8,). 88 6).6 8).6 9,).8 67,). 77,). 8 * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) coparable with SAE (heaped) ) Bucket with teeth ) Bucket with teeth in HD-version ) Bucket with cutting edge (also available in HD-version) Max. aterial weight = t/, = t/, =. t/, = not authorised 6 A 9 Litronic
7 Lift Capacities with Two-Piece Boo Stick Stick Height 8.* 8.* 8.* 8.* * * 8. * 8. * 8. * * 8.* 8.* 8.* 8.* * * * * * * * * * * * * * * *.6 * * * * * * * * * *.*.*.*.*.*.*.*.*.*.6*.6*.6* Can be slewed through 6 6.* 6.* * * * * * * * 6.* 6.*.*..*.*.*.7 * * * * * * * * * * * * * * * * * * * * * * * In longitudinal position of undercarriage * * * * * * * * * * * * * * * * * * Max. reach * * * * 8.8* * * * * 8.8* 8.8* 8.8*.*.*.*.*.*.*.*.*.*.7*.7*.7* * * * * * * 6.* 6.* 6.* * * *..7 * * *.. *. 6.* 6.* * * * * * * 6.* 6.* 6.* 6.* * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 9 Litronic 7
8 Lift Capacities with Two-Piece Boo Stick Stick Height * * * * * * * * * * * * 8.* * 8.* 8.*.*.*.*.*.*.* 7..7*.7*.7* 7. * * * * * Can be slewed through 6 * * * * *...7 * * * *... * * * * * * * * * * * * * * * * * * In longitudinal position of undercarriage * * 9. * * * * * * * * * *.*.* 6.* * Max. reach * * * 8.* * * * * 8.* 8.* 8.* 9.* 9.* 9.*.*.*.*.*.*.* 7..*.*.* 6.9 * * * * * *.9.6 * * * * * * * * * * * * * * *.7 * * * * * * * * *. * *. * *.. * * * * * * * * * * * * * * * * * * * * * * * * * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. 8 A 9 Litronic
9 Lift Capacities with Two-Piece Boo - Stick Stick * * * * 6.* * * * * 9. *. * * *.6.* 8..* 9. *. * * *..*.* *.9 * * 9. * * * Height 8.* 8.* 8.* 8.* 8.* 8.* 6. * * * * * *.9 6. * * * * 6.* 6.* * * * * * * *.* * * * * 9. *. * * *.7 8.8* 8.8* 8. * * * 8..* 8. * * * *. * * *..* 8..* * *.* 8..* * * * 8..* * * * * * *.6*.6* 6.* * *.7*.9 * * * 9. * * *.. 6.* 6.* 6.* 6.* Can be slewed through 6 In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 9 Litronic 9
10 Lift Capacities with Two-Piece Boo - Stick Stick 6. * * * * * * * * * * * 9. *. * * *.7 8.* * 8..* * * * 8..* * * * *.7* * 9. * * *. 7. * Can be slewed through 6 * * * Height 6. * * * 7. * * * * * * * * 6. * * * * * * * * * * * * * * * * * * * * * * *.6 * * *.7 8.* 8.* 8.* * * * * * * 9.* *. * * *. 9.* 9.* * * * * 9..*..*..*.* *..* 8..* * * *.9 7..*.* * * * In longitudinal position of undercarriage Max. reach 6.9 * * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 9 Litronic
11 Backhoe Bucket with Mono Boo ft H without quick coupler Max. digging force (ISO 6) kn t Max. breakout force (ISO 6) kn t Max. breakout force with ripper bucket 6.9 kn (6. t) The operating weight includes the basic achine with 8 tres plus interediate rings, ono boo, stick, quick coupler SW8 and bucket, /.8. - versions A 9 litronic` with stabilizer blade A 9 litronic` with stabilizer blade pt. outriggers A 9 litronic` with pt. outriggers A 9 litronic` with stabilizer blade A 9 litronic` with stabilizer blade pt. outriggers Operating Weight Digging Forces Digging Envelope with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height Min. attachent radius Weight (kg) 8, 9,8 9,8 8,, ft point outriggers pt. outriggers Weight Capacit ISO 7) Cutting width Buckets Machine stabilit per ISO 67* (7 % of tipping capacit) pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg 6). 8).6,).8 6,). 7,). 79 6). 7 8).6 6,).8 7,). 8,). 88 6).6 8).6 9,).8 67,). 77,). 8 * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) coparable with SAE (heaped) ) Bucket with teeth ) Bucket with teeth in HD-version ) Bucket with cutting edge (also available in HD-version) Max. aterial weight = t/, = t/, =. t/, = not authorised A 9 Litronic
12 Lift Capacities with Mono Boo Stick Stick Height *.7* * *.7*.7*.7*.7* * * * * * * * * * 9.* 9.* 9.* * * * * *. Can be slewed through 6 * * * * 6.* 6.* 6.* *. * * * * * * *. * * * * * * * * * * * * * In longitudinal position of undercarriage *.* * *.*.*.*.* * * * * Max. reach * * * * 9.* 9.* 9.* 8.* 8.* 8.* * *. * * * * 6.* 6.* 6.* 6.* 6.* 6.*. * * * * * * *.. 6. * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 9 Litronic
13 Lift Capacities with Mono Boo Stick Stick Height * * 6.9 * * * * * 8.9* 8.9* 6.6 *. Can be slewed through 6 * * * 6.* 6.* 6.*. * * * * * * * * *. * * * * * * * * * * * In longitudinal position of undercarriage 6.9.*.* * 8.* 6..*.* *.*.*.* 8.* 8.* 8.* 8.*.*.*.*.* Max. reach * * 8.* * * * * * 8.* 8.* 8.* 9.* 9.* 9.* * 8.9* 8.9* * * *....*.*.*.* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 9 Litronic
14 Lift Capacities with Mono Boo - Stick Stick * * * * * 7. * * * 6.* 6.* * * * * * * * 9.* 9.* * * * 6.9 * *.7* 8.6.7*.7*.7*. * * 6.9 * 8.8 * * * 6.9 * *.9 Height Can be slewed through 6. * * * * * 6.* 6.* 9.* 9.* * * * * 7..* 8..*.*.*. * * * * 8.* 8.* 6.* 6.* 6. In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 9 Litronic
15 Lift Capacities with Mono Boo - Stick Stick * * * 8.9* 8.9* * 8.6 * * * Height * * * * * * * * * * * * 8. * * * 6.* Can be slewed through 6 6. * * * * * * * * * * * * * * * *.*.* * * * * 8.* 8.* * * * * * * 8.* 8.* 8.*. 9.* 9.* * 8..*.*.* * * * 8.9*. 6.6 * * * * In longitudinal position of undercarriage.*.*.*.* 7. 8.* 8.* Max. reach * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 9 Litronic
16 Backhoe Bucket with Offset Two-Piece Boo ft Digging Envelope H87 with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Max. teeth height Min. attachent radius with stick with stick with stick with stick at ax. attachent offset with vertical ditch walls Digging Forces without quick coupler Max. digging force (ISO 6) kn t Max. breakout force (ISO 6) kn t Max. breakout force with ripper bucket 6.9 kn (6. t) Operating Weight 8 ft with stick 6 with stick 7 with stick 8 with stick with set straight boo R The operating weight includes the basic achine with 8 tres plus interediate rings, offset two-piece boo, stick, quick coupler SW8 and bucket, /.8. versions A 9 litronic` with stabilizer blade A 9 litronic` with stabilizer blade pt. outriggers A 9 litronic` with pt. outriggers A 9 litronic` with stabilizer blade A 9 litronic` with stabilizer blade pt. outriggers Weight (kg) 9,,, 9,6, 6 point outriggers pt. outriggers Weight Capacit ISO 7) Cutting width Buckets Machine stabilit per ISO 67* (7 % of tipping capacit) pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg,).8 6,). 7,). 79,).8 7,). 8,). 88,).8 67,). 77,). 8 * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) coparable with SAE (heaped) ) Bucket with teeth ) Bucket with teeth in HD-version ) Bucket with cutting edge (also available in HD-version) Max. aterial weight = t/, = t/, =. t/, = not authorised 6 A 9 Litronic
17 Lift Capacities with Offset Two-Piece Boo Stick Stick Height 9.* 9.* 9.* * * 9. * * * * 9.* 9.* 9.* 9.* * * * * * * * * * *.6 * * * *.*.*.*.*.*.* 7..*.*.* 6.*. Can be slewed through 6 6.* 6.* 6.*.. * * * * *.. * * * * * * * * * * * * * * * * * * * * In longitudinal position of undercarriage * * * * * * * * * * 6.* 6.* 6.* * * * * * * * Max. reach 8.* * 8.* 8.*.*.*.*.*.*.* * * * * *.9. * * * * * * * *.. * * *.. *... * * * * * *.*.*.* * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 9 Litronic 7
18 Lift Capacities with Offset Two-Piece Boo Stick Stick Height * * * * * * * * * * * * * * * * * * * * * * 6.* 6.* * * 6.* 6.* 6.* 6.* * * * 7. 9.* 9.* 9.*.*.*.*.*.*.* * * * * *.7.6 Can be slewed through 6 * * * * * * *. * * * * * * *..... *.. * * * * * * * * * * * * * * * * In longitudinal position of undercarriage * * * * * 8. * * * * * * * * Max. reach * * * * 7. 9.* 7. 9.* 9.* *.* 8.8.* 6.6 * 6.6 * 8. * * * * * * * * * * * * * * 6.* 6.* 6.*. *. * * * * * * * * * * * * * *. * *.. *..... * * * * * * * * * * * * * * * * * * * * * * * * * * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. 8 A 9 Litronic
19 Lift Capacities with Offset Two-Piece Boo - Stick Stick * 6.* 9.. * *.7 8. * * 9. *. * * *.6...*.* * 8.9 * * * Height 9.* 9.* 9.* 9.* 9.* 9.* * * * * * * * * * * * * * * 8..*.* * *..* 7..* Can be slewed through 6 6. * * * * * * 6. * * * * * 8.* 8. 9.* *. * * *. * * * * * 6.*.*.* * *.*.* * * *.9 *..*.* * 8.9 * * *. In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 9 Litronic 9
20 Lift Capacities with Offset Two-Piece Boo - Stick Stick 6. * * * * * * * * * * * 6.* 6.* 6.* 9. *. * * *.7 8. * * * * 8. *. * * *. 9.* 9.* * * *. * * *.. * * *.* * * 9..*.* * 8.9 * * * * Can be slewed through 6 * * *.9 6.* Height 6. * * * * * * * * * * * 6. * * * * * * * * * * * * * * * *. * * *.7 * * * * 6.* 6.* * * * * * * * 9.*. * * * * 9.9 * * * * * 9..*.* * * * * * 7..9 In longitudinal position of undercarriage Max. reach * * * Liited b hdr. capacit The lift capacities on the load lift hook of the Liebherr quick coupler SW8 without working tool are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers and over the rigid axle with the stabilizers. The values appl when the adjusting clinder is in the optial position. Indicated loads based on the ISO 67 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit, or are liited b the perissible load of the load lift hook on the quick coupler (ax. t). Without the quick coupler, lift capacities will increase b up to 6 kg. In accordance with the haronised European Standard EN 7-, hdraulic excavators used for lifting operations ust be equipped with pipe fracture safet valves, an overload warning device, a load lift hook and a lift capacit chart. A 9 Litronic
21 Clashell Grab with Two-Piece Boo ft H kn (7. t) 6 kn The operating weight includes the basic achine with 8 tres plus interediate rings, two-piece boo, stick, quick coupler SW8 and clashell grab odel GM B /. (8 without ejector). versions A 9 litronic` with stabilizer blade A 9 litronic` with stabilizer blade pt. outriggers A 9 litronic` with pt. outriggers A 9 litronic` with stabilizer blade A 9 litronic` with stabilizer blade pt. outriggers - - Weight (kg) 8,,, 8,6, Operating Weight - - Max. tooth force Max. torque of hdr. swivel Clashell Grab Model GM B Digging Envelope with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height ft point outriggers pt. outriggers Weight Capacit Width of clashells Clashell Grab Model GM B Machine stabilit per ISO 67* (7 % of tipping capacit) pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg ).7 77 ). 8 6). 86 8). 9,).6 97,) )., ).7 8 ). 88 6). 9 8)., * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) without ejector ) with ejector ) Shells for loose aterial Max. aterial weight = t/, = t/, =. t/, = not authorised A 9 Litronic
22 Clashell Grab with Mono Boo ft 9 Digging Envelope H8 with quick coupler Stick length Max. digging depth Max. reach at ground level Max. duping height Operating Weight Weight (kg) 8,8,, 9,, kn (7. t) 6 kn versions A 9 litronic` with stabilizer blade A 9 litronic` with stabilizer blade pt. outriggers A 9 litronic` with pt. outriggers A 9 litronic` with stabilizer blade A 9 litronic` with stabilizer blade pt. outriggers The operating weight includes the basic achine with 8 tres plus interediate rings, ono boo, stick, quick coupler SW8 and clashell grab odel GM B /. (8 without ejector) Clashell Grab Model GM B 8.6 Max. tooth force Max. torque of hdr. swivel ft point outriggers pt. outriggers Weight Capacit Width of clashells Clashell Grab Model GM B Machine stabilit per ISO 67* (7 % of tipping capacit) pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg ).7 77 ). 8 6). 86 8). 9,).6 97,) )., ).7 8 ). 88 6). 9 8)., * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) without ejector ) with ejector ) Shells for loose aterial Max. aterial weight = t/, = t/, =. t/, = not authorised A 9 Litronic
23 Attachents Clashell Grabs point outriggers pt. outriggers Weight Capacit Width of clashells Clashell Grab Model GM B Machine stabilit per ISO 67* (7 % of tipping capacit) pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg Offset two-piece boo ).7 77 ). 8 6). 86 8). 9,).6 97,) )., ).7 8 ). 88 6). 9 8)., * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) without ejector ) with ejector ) Shells for loose aterial Max. aterial weight = t/, = t/, =. t/, = not authorised A 9 Litronic
24 Attachents Ditch Cleaning Buckets point outriggers pt. outriggers Weight Capacit ISO 7) Cutting width Ditch Cleaning Buckets Machine stabilit per ISO 67* (7 % of tipping capacit) pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg Two-piece boo,).,6). 69,6).8 8,). 69,).7,).7 88,). 9,).8 88,). 98,).8 89 Mono boo,).,6). 69,6).8 8,). 69,).7,).7 88,). 9,).8 88,). 98,).8 89 Offset two-piece boo,).,6). 69,6).8 8,). 69,).7,).7 88,). 9,).8 88,). 98,).8 89 * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) coparable with SAE (heaped) ) with x rotator ) rigid ditch cleaning bucket Max. aterial weight = t/, = t/, =. t/, = not authorised A 9 Litronic
25 Attachents Tilt Buckets point outriggers pt. outriggers Weight Capacit ISO 7) Cutting width Tilt Buckets Machine stabilit per ISO 67* (7 % of tipping capacit) pt. outriggers Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () Stick length () kg Two-piece boo,). 97,6).8 8,6). 89 Mono boo,). 97,6).8 8,6). 89 Offset two-piece boo,). 97,6).8 8,6). 89 * Indicated loads are based on ISO 67 and do not exceed 7 % of tipping or 87 % of hdraulic capacit, ax. stick length without quick coupler, lifted 6 on fir with blocked oscillating axle ) coparable with SAE (heaped) ) with x rotator Max. aterial weight = t/, = t/, =. t/, = not authorised A 9 Litronic
26 Equipent Dual-circuit braking sste rear front, outriggers rear Lighting trailer coupling Trailer coupling with bolt, autoatic Digging brake, autoatic Tres (twin tres) Liebherr EM 9/9- Individual control outriggers Travel speed levels (four) Tilt function of trailer, hdraulic Load holding valve on each stabilization clinder Powershift transission, seiautoatic Parking brake, aintenance-free Tres, variants Protection for piston rods, stabilizer clinder Speeder ** / 9' Tool equipent, extended Tool box left lockable Tool box right lockable Operator s Cab Uppercarriage Uppercarriage right side light, piece, LED Uppercarriage rear light, pieces, LED Refuelling sste with filling pup Main batter switch for electrical sste Engine hood with gas spring Warning beacon on uppercarriage, LED Service doors, lockable Hdraulic Sste Shut-off valve between hdraulic tank and pup(s) Pressure test fittings Accuulator for controlled lowering of the attachent with the engine shut Hdraulic oil filter with integrated icrofilter Liebherr hdraulic oil fro C to C Liebherr hdraulic oil, biologicall degradable Liebherr hdraulic oil, speciall for war or cold regions Bpass filter Switchover high pressure circuit and tipping clinder Switchover high pressure circuit and two-piece boo Diesel Engine Fuel anti-theft device Liebherr particle filter Air pre-filter with dust discharge Preheating fuel Preheating coolant Preheating engine oil 6 A 9 Litronic Storage copartent Stabilizer, proportional control on left jostick Cab lights rear, LED Cab lights front, halogen (under rain cover) Cab lights front, LED (above rain cover) Cab lights front, LED (under rain cover) Left ar console, folding Exterior irror, electrical adjustable, with heating Mechanical hour eters, readable fro outside the cab Roof window ade fro ipact-resistant lainated safet glass Slewing gear brake Cofort, button on the right jostick Operator s seat Standard Operator s seat Cofort Operator s seat Preiu Driving alar (acoustic signal is eitted during travel, can be switched ON / OFF) Fire extinguisher Front screen ade fro ipact-resistant lainated safet glass not adjustable Windscreen retractable (including upper part) Interittent windscreen wiper with wiper washer Cruise control Rubber floor at, reovable Doe light Jostick steering Coat hook Autoatic air conditioning Fuel consuption indicator Electric cooler Steering wheel, wide version (cost-neutral option) Steering colun adjustable horizontall LiDAT, vehicle fleet anageent Autoatic engine shut- (tie adjustable) Eergenc exit rear window Positioning swing brake Proportional control Radio Cofort, control via displa with handsfree set Preparation for radio installation Rain cover over front window opening ROPS cab protection Back-up alar (acoustic signal is eitted traveling backward, can not be switched off) Warning beacon on cab, LED Windows ade fro ipact-resistant lainated safet glass All tinted windows Windscreen wiper, roof Windshield wiper, entire windscreen Door with sliding window Top guard Front guard, adjustable Right side window and windshield ade fro lainated safet glass Sun visor Sun blind Auxiliar heating, adjustable (week tie switch) Electronic iobilizer Cigarette lighter
27 Attachent Boo lights, pieces, halogen Boo lights, pieces, LED Stick lights, pieces, LED High pressure circuit incl. unpressurised return line and Tool Control Electronic lift liitation Securit for hoist clinder for hdraulic tools Load holding valve bucket clinder Load lug on stick Leak oil line, additional for working tools Liebherr ditch cleaning bucket Liebherr quick coupler, hdraulic or echanical Liebherr tilt bucket Liebherr tilt rotator Liebherr sorting grab Liebherr backhoe bucket Liebherr tooth sste Liebherr clashell grab Mediu pressure circuit incl. lines Mono boo Pipe fracture safet valves hoist clinders Pipe fracture safet valve stick clinder Return line, pressureless (in high pressure circuit option included) Hose quick coupling at end of stick Quick coupling sste LIKUFIX Protection for piston rod, bucket clinder Protection for botto side of stick Tool Control, tool adjustents selectable over the displa Overload warning device Two-piece boo Offset two-piece boo Coplete Machine Lubrication Lubrication undercarriage, anuall decentralised (grease points) Lubrication undercarriage, anuall centralised (one grease point) Central lubrication sste for uppercarriage and attachent, autoaticall (without quick coupler and connecting link) * Central lubrication sste, extension for quick coupler Central lubrication sste, extension for connecting link Special coating Custo painting for tools Special coating, variants Monitoring Rear view onitoring with caera Side view onitoring with caera = Standard, = Option * = countr-dependent, ** = depending upon the countr partiall onl k/h peritted Options and / or special attachents, supplied b vendors other than Liebherr, are onl to be installed with the knowledge and approval of Liebherr in order to retain warrant. A 9 Litronic 7
28 Wide Product Range The Liebherr Group is one of the largest construction equipent anufacturers in the world. Liebherr s high-value products and services enjo a high reputation in an other fields. The wide range includes doestic appliances, aerospace and transportation sstes, achine tools and aritie cranes. State-of-the-art Technolog To provide consistent, top qualit products, Liebherr attaches great iportance to each product area, its coponents and core technologies. Iportant odules and coponents are developed and anufactured in-house, for instance the entire drive and control technolog for construction equipent. Exceptional Custoer Benefit Ever product line provides a coplete range of odels in an different versions. With both their technical excellence and acknowledged qualit, Liebherr products offer a axiu of custoer benefits in practical applications. Worldwide and Independent Hans Liebherr founded the Liebherr fail copan in 99. Since that tie, the enterprise has steadil grown to a group of ore than copanies with over, eploees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr fail is the sole owner of the copan. Liebherr-Hdraulikbagger GbH Liebherrstraße, D-887 Kirchdorf / Iller S , Fax info.lhb@liebherr.co Printed in Geran b Eberl RG-BK LHB/F _enGB All illustrations and data a differ fro standard equipent. Subject to change without notice. The Liebherr Group of Copanies
Wheeled Excavator A 912 Compact
Wheeled Excavator A 91 Copact litronic` Operating Weight: 1,700 1,900 kg Engine: 90 kw / 1 HP Stage IV Bucket Capacit: 0.1 Technical Data Diesel Engine Rating per ISO 99 Model Tpe Bore / Stroke Displaceent
More informationWheeled Excavator A 924 Heavy Lift
Wheeled Excavator A 9 Heav Lift litronic` Operating Weight: 6, 8, kg Engine: 6 kw / 7 HP Stage I Bucket Capacit:.7.7 Technical Data Diesel Engine Rating per ISO 99 Model Tpe Bore / Stroke Displaceent Engine
More informationCrawler Excavator R 914 Compact
Crawler Excavator R 9 Copact litronic` Operating Weight:,, kg Engine: 9 kw / HP Stage I Bucket Capacit:.. Technical Data Diesel Engine Rating per ISO 99 Model Tpe Bore / Stroke Displaceent Engine operation
More informationWheeled Excavator A 914
Wheeled Excavator A 9 litronic` Operating Weight:,9 7, kg Engine: kw / HP Stage I Bucket Capacit:.7.87 H Technical Data Diesel Engine Rating per ISO 99 Model Tpe Bore / Stroke Displaceent Engine operation
More informationMachine for Industrial Applications LH 80 M
Machine for Industrial Applications LH M litronic` : 7, 7,9 kg Engine: 3 kw / 313 HP Stage IIIB / Tier i Max. Syste Perforance: 3 kw Technical Data Engine Rating per ISO 99 Model Type Bore/Stroke Displaceent
More informationMachine for Industrial Applications LH 26 M
Machine for Industrial Applications LH 26 M litronic` Operating Weight: 2,3 26, kg Engine: kw / 1 HP Stage IIIB Technical Data Engine Rating per ISO 9249 Model Type Bore/Stroke Displaceent Engine operation
More informationMachine for Industrial Applications LH 24 M
Machine for Industrial Applications LH 24 M litronic` Operating Weight: 23,8 24,3 kg Engine: kw / 43 HP Stage IIIB Technical Data Engine Rating per ISO 9249 Model Type Bore/Stroke Displaceent Engine operation
More informationLH 40 Port LH 50 Port
Material Handling Machines LH Port LH Port litronic` litronic` Operating Weight 1,,7 kg * Engine 1 kw / 11 HP Stage IV Stage IIIA Syste Perforance 33 kw * without working tool Technical Data Diesel Engine
More informationWheeled Excavator A 924 Rail
Wheeled Ecavator A 924 Rail litronic` Friction Drive Operating Weight: 21,8 24,7 kg Engine: 11 kw / 15 HP Technical Data Diesel Engine Rating per ISO 9249 Model Tpe Bore / Stroke Displaceent Engine operation
More informationCrawler Excavator R 918 Compact
Crawler Excavator R 918 Copact Preliinary Version Motor: 1 kw / 136 HP Stage IV / Tier 4f Operating Weight: 18,75 21,3 kg Bucket Capacity:.3.95 3 Long live progress with the R 918 Copact Very cofortable
More informationWheeled Excavator A 900 C A 904 C
Wheeled Excavator A 9 C A 94 C Operating : 18, - 19, kg 2,4-2,6 kg Engine Output: 9 kw / 129 HP 1 kw / 143 HP Bucket Capacity:.32-1. ³. - 1.2 ³ A 9 C Operating : 18, - 19, kg Engine Output: 9 kw / 129
More informationR 954 C SME. Product Information: Crawler Excavator
Product Inforation: Crawler Excavator R 954 C SME Operating Weight with Backhoe Attachent: 59,400 60,900 kg Operating Weight with Shovel Attachent: 61,850 6,450 kg Engine Output 40 kw / 36 HP Stage IIIA
More informationlitronic` Timber Operating Weight: 29,300 kg Engine Output: 140 kw / 190 HP
Log Loader LH 35 M litronic` Timber Operating Weight: 29,300 kg Engine Output: 140 kw / 190 HP Technical Data Engine Rating per ISO 9249 140 kw (190 HP) at 1,800 RPM Model Liebherr D934 according to stage
More informationWheeled Excavator A 918 Compact. Operating Weight: 17,500 19,600 kg Engine: 115 kw / 156 HP Stage IV Bucket Capacity: m³
Wheeled Excavator A 98 Copact Operating Weight: 7, 9,6 kg Engine: kw / 6 HP Stage I Bucket Capacit:.7. ³ A 98 Copact Litronic Operating Weight: 7, 9,6 kg Engine: kw / 6 HP Stage I Bucket Capacit:.7. ³
More informationlitronic` Timber Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249): 190 HP / 140 kw
Log Loader LH 35 M litronic` Timber Operating Weight: 64,600 lb Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249): 190 HP / 140 kw Technical Data Engine Rating per SAE J1349 188 HP (140
More informationlitronic` Operating Weight: 80,350 83,000 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw
Log Loader A 934 C HD litronic` Operating Weight: 80,30 83,000 lb Engine Output (SAE J1349): 201 HP / 10 kw Engine Output (ISO 9249): 204 HP / 10 kw Technical Data Engine Rating per SAE J1349 201 HP (10
More informationWheeled Excavator. A 912 Compact. Operating Weight kg Engine 90 kw / 122 HP Stage IV Bucket Capacity m³
Wheeled Excavator A 912 Copact Operating Weight 12.700 13.900 kg Engine 90 kw / 122 HP Stage IV Bucket Capacit 0.15 0.48 ³ Perforance Copact, Flexible Perfect Cobination for Maxiu Perforance Econo A Sound
More informationlitronic` Timber Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw
Log Loader LH 50 M litronic` Timber Operating Weight: 82,100 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw Technical Data Engine Rating per SAE J1349 201 HP (150
More informationWheeled Excavator. A 910 Compact. Operating Weight 11,800 12,800 kg Engine 85 kw / 116 HP Stage IV Bucket Capacity m³
Wheeled Excavator A 910 Copact Operating Weight 11,800 12,800 kg Engine 85 kw / 116 HP Stage IV Bucket Capacit 0.15 0.48 ³ Perforance Copact, Flexible Perfect Cobination for Maxiu Perforance Econo A Sound
More informationWheeled Excavator A 912 Compact. Operating Weight: 12,700 13,900 kg Engine: 90 kw / 122 HP Stage IV Bucket Capacity: m³
Wheeled Excavator A 912 Copact Operating Weight: 12,700 13,900 kg Engine: 90 kw / 122 HP Stage IV Bucket Capacit: 0.15 0.48 ³ A 912 Copact Litronic Operating Weight: 12,700 13,900 kg Engine: 90 kw / 122
More informationRailroader A 922 Rail. Operating Weight: 19,900 22,800 kg Engine: 110 kw / 150 HP
Railroader A 922 Rail Operating Weight: 19,900 22,800 kg Engine: 110 kw / 150 HP A 922 Rail Litronic Operating Weight: 19,900 22,800 kg Engine: 110 kw / 150 HP Perforance Copact, flexible Perfect cobination
More informationMachine for Industrial Applications LH 22 M
Machine for Industrial Applications LH 22 M litronic` Operating Weight: 48,7, lb Engine: 34 HP / kw Stage Tier 3 Technical Data Engine Rating per SAE J349 34 HP ( kw) at,8 rpm Model Liebherr D834 Type
More informationProduct Information Crawler Excavator. R 914 Compact. Engine 90 kw / 122 HP Stage IV Operating Weight 14,900 17,400 kg Bucket Capacity
Product Inforation Crawler Excaator R 9 Copact Engine 9 kw / HP Stage I Operating Weight,9 7, kg Bucket Capacit..8 Experience the Progress R 9 Copact Maintenance Innoatie sericing concept, with serice
More informationTechnical Description Hydraulic Excavator A 310 B. Operating Weight 11,1 11,9 t Engine Output 58 kw (79 HP) Bucket Capacity 0,10 0,45 m 3
Technical Description Hydraulic Excavator A B Operating Weight,, t Engine Output kw ( HP) Bucket Capacity,, m Technical Data Engine Deutz-Diesel engine Rating per ISO kw ( HP) at RPM Model BF M E Typ cylinder-in-line,
More informationRailroader A 922 Rail. Operating Weight: 19,900 22,800 kg Engine: 110 kw / 150 HP
Railroader A 922 Rail Operating Weight: 19,9 22,8 kg Engine: 11 kw / 15 HP A 922 Rail Litronic Operating Weight: 19,9 22,8 kg Engine: 11 kw / 15 HP Perforance Copact, flexible Perfect cobination for axiu
More informationA 934 C HD. Machine for Industrial Applications
Machine for Industrial Applications A 934 C HD litronic` Operating Weight: 9,7 93, lb Engine Output (SAE J1349): 21 HP / kw Engine Output (ISO 9249): 24 HP / kw Technical Data Engine Rating per SAE J1349
More informationMachine for Industrial Applications
Machine for Industrial Applications A 9 C litronic` Operating Weight: 8, 8, lb Engine Output: hp / kw Technical Data Engine Rating per ISO 99 hp ( kw) at 8 rpm Model Liebherr D 9 L according to level IIIA
More informationProduct Information: Crawler Excavator. R 936 Compact. Engine 190 kw / 258 HP Stage IV Operating Weight 33,500 34,650 kg Bucket Capacity
Product Inforation: Crawler Excaator R 936 Copact Engine 19 kw / 258 HP Stage I Operating Weight 33,5 34,65 kg Bucket Capacit 1. 2. ³ Experience the Progress R 936 Copact Maintenance Increased productiit
More informationMachine for Industrial Applications
Machine for Industrial Applications A C litronic` Operating Weight:,, lb Engine Output: hp / kw Technical Data Engine Rating per ISO hp ( kw) at rpm Model Liebherr D S according to level IIIA / Tier Type
More informationTunneling Excavators. Product Information. Compact
Tunneling Excavators R 924 Copact R 944 C Product Inforation R 924 Copact R 944 C Litronic Operating Weight:,000-4,00 kg 4,600-44,200 kg Engine Output: 129 kw / 17 P 190 kw / 28 P Tunnel eight: 4.7-7.0.40-8.00
More informationMachine for Industrial Applications A 934 C HD
Machine for Industrial Applications A 9 C HD litronic` High Rise Operating Weight:,00 6,00 kg Engine Output: 0 kw / 0 HP Technical Data Engine Rating per ISO 99 0 kw (0 HP) at,800 RPM Model Liebherr D
More informationMachine for Industrial Applications A 944 C HD
Machine for Industrial Applications A 9 C HD litronic` Operating Weight: 57, 58,5 kg Engine Output: 19 kw / 58 HP Technical Data Engine Rating per ISO 99 19 kw (58 HP) at 1,8 RPM Model Liebherr D 936 L
More informationA 934 C HD. Machine for Industrial Applications
Machine for Industrial Applications A 93 C HD litronic` High Rise Operating Weight: 100,300 10,300 lb Engine Output (SAE J139): 01 HP / 150 kw Engine Output (ISO 99): 0 HP / 150 kw Technical Data Engine
More informationMachine for Industrial Applications A 954 C HD
Machine for Industrial Applications A 95 C HD litronic` High Rise Operating Weight: 83, 90,9 kg Engine Output: 0 kw / 36 HP Technical Data Engine Rating per ISO 99 0 kw (36 HP) at 1,800 RPM Model Liebherr
More informationLH 24 Industry LH 26 Industry
Material Handling Machines LH Industry LH Industry Operating Weight,, kg Engine kw / HP kw / HP Stage IV Perforance Power plus speed Redefined perforance Econoy Good investent Savings for long-ter LH M
More informationA 954 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications
Technical Description Hydraulic Excavator A 95 B HD litronic` Machine for Industrial Applications Operating Weight 138,88 151, lbs Engine Output HP ( kw) Technical Data Engine Rating per ISO 99 HP ( kw)
More informationA 944 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications
Technical Description Hydraulic Excavator A 944 B HD litronic` Machine for Industrial Applications Operating Weight 106,300 116,000 lbs Engine Output 245 HP (180 kw) Technical Data Engine Rating per ISO
More informationMachine for Industrial Applications
Machine for Industrial Applications A 95 C HD litronic` High Rise Operating Weight: 79,95 87,55 kg Engine Output: kw / 36 HP Technical Data Engine Rating per ISO 99 kw (36 HP) at 18 RPM Model Liebherr
More informationA 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications
Technical Description Hydraulic Excavator A 9 B litronic` Machine for Industrial Applications Operating Weight 67,7 7,98 lbs Engine Output 97 HP ( kw) Technical Data Engine Rating per ISO 99 97 HP ( kw)
More informationCrawler Excavator R 920
Crawler Excavator R 92 Operating Weight: 2,2 23,6 kg Engine Output: 15 kw / 143 HP Bucket Capacity:.55 1.15 ³ New engine output R 92 Operating Weight: 2,2 23,6 kg Engine Output: 15 kw / 143 HP Bucket Capacity:.55-1.15
More informationLH 120 M. Machine for Industrial Applications
Machine for Industrial Applications LH 1 M litronic` Operating Weight: 308,450 336,0 lb Engine Output (SAE J1349): 536 HP / 400 kw Engine Output (ISO 9249): 543 HP / 400 kw Technical Data Engine Rating
More informationMachine for Industrial Applications A 944 C HD
Machine for Industrial Applications A 9 C HD litronic` High Rise Operating Weight: 68,690 71,780 kg Engine Output: 190 kw / 58 HP Technical Data Engine Rating per ISO 99 190 kw (58 HP) at 1,800 RPM Model
More informationM313D. Wheel Excavator. The D Series incorporates innovations for improved performance and versatility.
M313D Wheel Excavator The D Series incorporates innovations for iproved perforance and versatility. High lifting capacity, fast cycle ties and ease of operation lead to increased productivity and lower
More informationCrawler Excavator R 918
Crawler Excavator R 918 Operating Weight: 18,1 21,8 kg Engine Output: 9 kw / 129 HP Bucket Capacit:.17.9 ³ New engine output R 918 Operating Weight: 18,1 21,8 kg Engine Output: 9 kw / 129 HP Bucket Capacit:.17.9
More informationCrawler Excavator. litronic` Operating Weight: 26,170 28,340 kg Engine Output: 130 kw / 177 HP Bucket Capacity: 0,30 1,40 m 3
Crawler Excavator R C litronic` Operating Weight:,, kg Engine Output: kw / HP Bucket Capacity:,, m Technical Data Engine Rating per ISO kw ( HP) at RPM Model Liebherr D S Type cylinder in-line Bore/Stroke
More informationMaterial Handling Machine LH 110 Port. Operating Weight: 100, ,000 kg Engine: 300 kw / 408 HP Stage IV Stage IIIA System Performance: 463 kw
Material Handling Machine LH 11 Port Operating Weight: 1, 12, kg Engine: 3 kw / 48 HP Stage IV Stage IIIA System Performance: 463 kw The Perfect Solution for Every Application H85 Shells for loose material
More informationMaterial Handling Machines. LH 22 Industry. Operating Weight 19,200 22,200 kg Engine 105 kw / 143 HP Stage IV Stage IIIA
Material Handling Machines LH Industry Operating Weight,, kg Engine kw / HP Stage IV Stage IIIA LH M Industry Litronic Operating Weight,, kg* Engine kw / HP Stage IV Stage IIIA LH C Industry Litronic Operating
More informationWheeled Excavator A 916. Operating Weight: 16,800 19,000 kg Engine Output: 110 kw / 150 HP Bucket Capacity: m³
Wheeled Excavator A 96 Operating Weight: 6,8 9, kg Engine Output: kw / HP Bucket Capacity:.7. m³ A 96 Operating Weight: 6,8 9, kg Engine Output: kw / HP Bucket Capacity:.7. m³ 2 A 96 Litronic Performance
More informationCrawler Excavator R 918. Operating Weight: 18,150 21,800 kg Engine Output: 85 kw / 116 HP Bucket Capacity: m³
Crawler Excavator R 918 Operating Weight: 18,15 21,8 kg Engine Output: 85 kw / 116 HP Bucket Capacity:.17.95 ³ R 918 Operating Weight: 18,15 21,8 kg Engine Output: 85 kw / 116 HP Bucket Capacity:.17.95
More informationCrawler Excavator. Operating Weight with Backhoe Attachment: 84, ,300 kg Operating Weight with Shovel Attachment: 89,400 91,200 kg
Crawler Excavator R 974 C litronic` Operating Weight with Backhoe Attachent: 84,4 11,3 kg Operating Weight with Shovel Attachent: 89,4 91,2 kg Engine Output: 4 kw / 43 P Bucket Capacity: 2,2 6,2 3 Shovel
More informationDemolition Excavator R 960
Attachent Inforation Deolition Excavator R 9 litronic` Engine: kw / 3 P Stage I / Tier f Operating Weight: 77,3 97,7 kg Working eight: 33 /: 9 Technical Data Engine Rating per ISO 99 Torque Model Type
More informationR 924. Product Information: Crawler Excavator
Product Inforation: Crawler Excaator R 94 Generation 8 Engine 19 kw / 175 HP Stage Operating Weight,4 5,6 kg Bucket Capacit.55 1.65 ³ Experience the Progress R 94 Safet Panoraic isibilit no obstructions
More informationLH 35 M Timber. Product Information Log Loader
Product Information Log Loader LH 3 M Timber Operating Weight 6,300 69,700 lb Engine kw / 201 HP (SAE J1349) kw / 204 HP (ISO 9249) Stage Tier 4f Performance Power Plus Speed Redefined Performance Economy
More informationCrawler Excavator R 956
Crawler Excavator R 956 Motor: 240 kw / 326 HP Stage IV Operating weight: Backhoe: 51,000 58,150 kg 56,750 57,300 kg Shovel: Bucket Capacity: Backhoe: 1.25 3.30 3 Shovel: 2.50 3.10 3 R 956 Litronic Motor
More informationCrawler Excavator R 944 C. Operating Weight: 38,500 40,900 kg Engine Output: 190 kw / 258 HP Stufe IIIA / Tier 3 Bucket Capacity:
Crawler Excaator R 944 C Operating Weight: 38,500 40,900 kg Engine Output: 190 kw / 258 HP Stufe IIIA / Tier 3 Bucket Capacit: 1.75 2.50 ³ R 944 C Litronic Operating Weight: 38,500 40,900 kg Engine Output:
More informationCrawler Excavator. Operating Weight with Backhoe Attachment: 66,400 79,600 kg Operating Weight with Shovel Attachment: 68,400 78,300 kg
Crawler Excavator R 964 C litronic` Operating Weight with Backhoe Attachent: 66,4 79,6 kg Operating Weight with Shovel Attachent: 68,4 78,3 kg Engine Output: 3 kw / 434 P Bucket Capacity:.. 3 Shovel Capacity:
More informationCrawler Excavator. Operating Weight with Backhoe Attachment: 65,700 76,900 kg Operating Weight with Shovel Attachment: 67,300 76,400 kg
Crawler Excavator R 964 C litronic` Operating Weight with Backhoe Attachent: 6,7 76,9 kg Operating Weight with Shovel Attachent: 67,3 76,4 kg Engine Output: 32 kw / 434 P Bucket Capacity: 2,, 3 Shovel
More informationLH 50 M. Machine for Industrial Applications. Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249):
Machine for Industrial Applications LH M litronic` High Rise Operating Weight: 12, 13,3 lb Engine Output (SAE J1349): 188 HP / 14 kw Engine Output (ISO 9249): 19 HP / 14 kw Max. System Performance (SAE
More informationR 922. Product Information: Crawler Excavator
Product Inforation: Crawler Excaator R 9 Generation 8 Engine kw / 6 HP Stage Operating Weight,5,75 kg Bucket Capacit.55 ³ Experience the Progress R 9 Safet Panoraic isibilit with no obstructions and caera
More informationLog Loader LH 60 M Timber
Product Information Log Loader LH 60 M Timber Operating weight: 44,800 kg Engine: 200 kw / 272 HP Stage IV Stage IIIA 2 LH 60 M Timber Litronic Performance Power plus speed Redefined performance Economy
More informationSPECIFICATIONS UNDERCARRIAGE
SPECIFICATIONS ENGINE Model... Yanar 4TNV94L Type... 4-cycle water-cooled, direct injection No. of cylinders... 4 Rated power ISO 9249, net... 34.1 kw (45.7 HP) at 2 000 in -1 (rp) EEC 80/1269, net...
More informationProduct Information Log Loader. LH 50 M Timber. Operating Weight 88,800 lb Engine 170 kw / 228 HP (SAE J1349) 170 kw / 231 HP (ISO 9249) Stage Tier 4f
Product Information Log Loader LH 50 M Timber Operating Weight 88,800 lb Engine 170 kw / 228 HP (SAE J1349) 170 kw / 231 HP (ISO 9249) Stage Tier 4f Performance Power Plus Speed Redefined Performance Economy
More informationWheeled Excavator A 912 COMPACT. Operating Weight: 12,700 13,900 kg Engine Output: 80 kw / 109 HP Bucket Capacity: m³
Wheeled Excavator A 912 COMPACT Operating Weight: 12,700 13,900 kg Engine Output: 80 kw / 109 HP Bucket Capacity: 0.15 0.48 m³ A 912COMPACT Operating Weight: 12,700 13,900 kg Engine Output: 80 kw / 109
More informationE175C SPECIFICATIONS ENGINE TIER 4 INTERIM ELECTRICAL SYSTEM CAPACITIES SWING CAB AND CONTROLS UNDERCARRIAGE HYDRAULIC SYSTEM
E175C SPECIFICATIONS ENGINE TIER 4 INTERIM Make and odel...fpt F4HFE413H*A001 Net flywheel Power (ISO 14396/ECE R120)...96 kw/129 hp (2200 rp) Maxiu torque...496 N (1600 rp) Type... Water-cooled, direct
More informationCrawler excavator R 976
Crawler excavator R 976 Operating Weight with Backhoe Attachment: 85,3 95,5 kg Operating Weight with Shovel Attachment: 9,8 92,6 kg Engine Output: 4 kw / 544 P Bucket Capacity: 2. 6.6 m³ Shovel Capacity:
More informationLog Loader LH 35 M Timber
Product Information Log Loader LH 35 M Timber Operating weight: 65,300-65,900 lb Engine: 150 kw / 201 HP (SAE J1349) 150 kw / 204 HP (ISO 9249) Stage Tier 4f Performance Power plus speed Redefined performance
More informationWheeled Excavator. Operating Weight: 11,800 12,800 kg Engine Output: 75 kw / 102 HP Bucket Capacity: m³
Wheeled Excavator A 910COMPACT Operating Weight: 11,800 12,800 kg Engine Output: 75 kw / 102 HP Bucket Capacity: 0.15 0.48 m³ A 910COMPACT Operating Weight: 11,800 12,800 kg Engine Output: 75 kw / 102
More informationR 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 31,7 33,4 t Engine Output 145 kw (197 HP)
Technical Description Hydraulic Excavator R 934 B litronic` Machine for Industrial Applications Operating Weight 31,7 33,4 t Engine Output 14 kw (197 HP) Technical Data Engine Rating per ISO 9249 14 kw
More informationCrawler Excavator R 926COMPACT. Operating Weight: 25,050 28,900 kg Engine Output: 120 kw / 163 PS Bucket Capacity: m³
Crawler Excavator R 926COMPACT Operating Weight: 2, 28,9 kg Engine Output: 12 kw / 163 PS Bucket Capacity:. 1.3 ³ R 926COMPACT Operating Weight: 2, 28,9 kg Engine Output: 12 kw / 163 HP Bucket Capacity:.
More informationArticulated Truck TA 230
Articulated Truck TA 230 litronic` Operating Weight: 23,300 kg Engine Output: 270 kw / 367 HP Dump Body Capacity: 19.0 m 3 Payload: 30,000 kg Technical Data Engine Liebherr Diesel Engine D 936 L A6 Design
More informationWHEELED EXCAVATORS WX148 I WX168 I WX188
WHEELED EXCAVATORS WX148 I WX168 I WX188 WHEELED EXCAVATORS WX148 I WX168 I WX188 THE NEW GENERATION OF WHEELED EXCAVATORS 2 THE 8 SERIES Power and Control The WX wheeled excavators are designed to deliver
More informationWheeled Excavator A 928. Operating Weight: 26,500 27,600 kg Engine Output: 155 kw / 211 HP Bucket Capacity: m³
Wheeled Excavator A 928 Operating Weight: 26, 27,6 kg Engine Output: 1 kw / 211 HP Bucket Capacity:. 1.7 m³ A 928 Operating Weight: 26, 27,6 kg Engine Output: 1 kw / 211 HP Bucket Capacity:. 1.7 m³ 2 A
More informationMC Line. MC 96 Duty-cycle crane
MC Line MC 96 Duty-cycle crane Diensions basic achine 2040 450 50 2990 6040 3050 4700 000 3980 530 40 7280 020 R 4700 Operating weight 8300 with HD undercarriage,,000- triple-grouser track shoes, uppercarriage
More informationTechnical Description A 308 Hydraulic Excavator
Technical Description A Hydraulic Ecavator Operating weight 9, 9 t Engine output 6 kw (76 HP) Bucket capacity,, m Hydraulic Compact Ecavators are put to work in the most confined places, and at the same
More informationCrawler Excavator R 944 C SME. Operating Weight: 43,300 43,800 kg Engine Output: 190 kw / 258 HP Stufe IIIA / Tier 3 Bucket Capacity:
Crawler Excaator R 944 C SME Operating Weight: 43,300 43,800 kg Engine Output: 190 kw / 258 HP Stufe IIIA / Tier 3 Bucket Capacity: 2.50 3.00 ³ R 944 C SME Litronic Operating Weight: 43,300 43,800 kg Engine
More informationCrawler Excavator R 934 C. Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Stufe IIIA / Tier 3 Bucket Capacity:
Crawler Excavator R 934 C Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Stufe IIIA / Tier 3 Bucket Capacity: 1.65 2.00 m³ R 934 C Litronic Operating Weight: 32,600 33,500 kg Engine
More informationR 924 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications
Technical Description Hydraulic Excavator R 924 B litronic` Machine for Industrial Applications Operating Weight 9,63 66, lb Engine Output 173 HP (127 kw) Technical Data Engine Rating per ISO 9249 173
More informationMaterial Handling Machine LH 150 Port
Material Handling Machine LH 150 Port litronic` Operating Weight: 286,600 485,000 lb Engine: 536 HP / 400 kw (SAE J1349) 543 HP / 400 kw (ISO 9249) Stage Tier 4f Electro Max. System Performance: 614 kw
More informationWheeled Excavator A 920. Operating Weight 40,300 47,000 lb Engine 129 kw / 175 HP Tier 4f Bucket Capacity yd 3
Wheeled Excavator A 9 Operating Weight, 7, lb Engine 29 kw / 7 HP Tier f Bucket Capacit.72.7 d Performance Robustl Stable Power, Strength and Precision Econom A Sound Investment Optimum Econom and Environmentall
More information312E. Hydraulic Excavator
312E Hydraulic Excavator Engine Drive Engine Model Cat C4.4 ACERT Maxiu Travel Speed 5.5 k/h 3.4 ph Net Power SAE J1349 68 kw 91 hp Maxiu Drawbar Pull 114 kn 25,628 f Gross Power SAE J1995 71 kw 95 hp
More informationR 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 69,885 73,630 Engine Output 197 HP (145 kw)
Technical Description Hydraulic Excavator R 934 B litronic` Machine for Industrial Applications Operating Weight 69,88 73,63 Engine Output 197 HP (14 kw) Technical Data Engine Rating per ISO 9249 197 HP
More informationWHEELED EXCAVATORS WX148 I WX168 I WX188 MISSION ACCOMPLISHED. EXPERTS FOR THE REAL WORLD SINCE 1842
WHEELED EXCAVATORS WX148 I WX168 I WX188 MISSION ACCOMPLISHED www.casece.co EXPERTS FOR THE REAL WORLD SINCE 1842 1 2 WHEELED EXCAVATORS WX148 I WX168 I WX188 POWER AND CONTROL The WX wheeled excavators
More informationWheeled Excavator A 312. Operating Weight: 12,900-15,000 kg Engine Output: 81 kw / 110 HP Bucket Capacity: m³
Wheeled Excavator A 312 Operating Weight: 12,9-1, kg Engine Output: 81 kw / 11 HP Bucket Capacity:.17 -.8 m³ A 312 Operational weight: 12,9-1, kg Engine output: 81 kw / 11 HP Bucket capacity:.17 -.8 m³
More informationCrawler Excavator. Operating Weight: 24,400 24,800 kg Engine Output: 115 kw / 156 HP Bucket Capacity: m³
Crawler Excavator R 916 Operating Weight: 24,400 24,800 kg Engine Output: 115 kw / 156 HP Bucket Capacity: 0.80 1.20 m³ R 916 Operating Weight: 24,400 24,800 kg Engine Output: 115 kw / 156 HP Bucket Capacity:
More informationR 944 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Operating Weight 39,2 41,6 t Engine Output 180 kw (245 HP)
Technical Description Hydraulic Ecavator R 9 B litronic` Machine for Industrial Applications Operating Weight 39, 1,6 t Engine Output 18 kw (5 HP) The Better Machine. Engine Rating per ISO 99 18 kw (5
More informationTIER 3 ENGINE POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E175C 96 kw hp Kg 0.24 m m 3
TIER 3 ENGINE POWER MAX OPERATING WEIGHT BUCKET CAPACITY E175C 96 kw - 129 hp 18720 Kg 0.24 3-0.90 3 AS LONG AS WE KEEP BUILDING ROADS, THER MORE PRODUCTIVITY The hydraulic syste axiizes perforance according
More informationSUPER LONG FRONT. ZAXIS-5 series. ZX210LC-5B / ZX210LCN-5B 122 kw (164 HP) kg. ZX290LC-5B 140 kw (188 HP) kg
ZAXIS-5 series SUPER LONG FRONT A P P L I C A T I O N & A T T A C H M E N T Model Code Engine Rated Power Operating Weight ZX210LC-5B / ZX210LCN-5B 122 kw (164 HP) 21 900-22 600 kg Model Code Engine Rated
More informationFreePhone:
DEMAG AC0-2 0 Tonne ALL TERRAIN CRANE www.titancranes.co.nz FreePhone: 0800 8 2 TERE AC0-2 0 TONNE ALL TERRAIN CRANE AC 0-2 HIGHLIGHTS Due to the (newly) optiized boo syste, the AC 0-2 has higher duties
More information336E L Hydraulic Excavator Specifications
336E L Hydraulic Excavator Specifications Engine Hydraulic Syste Track Engine Model Cat C9.3 (ATAAC) Main Syste Net Power ISO 14396 236 kw Maxiu Flow (Total) Net Power ISO 14396 316 hp (Iperial) Swing
More informationWHEELED EXCAVATORS WX148 I WX168 I WX188
WHEELED EXCAVATORS WX148 I WX168 I WX188 WHEELED EXCAVATORS WX148 I WX168 I WX188 2 Power and Control The WX wheeled excavators are designed to deliver a axiu of productivity and precision. The extra powerful
More informationEngine Output: 65 kw / 88 HP - 68 kw / 92 HP Bucket Capacity: m³
Wheeled Excavators A 309 A 311 Operating Weight: 11,300-13,00 kg Engine Output: 6 kw / 88 HP - 68 kw / 92 HP Bucket Capacity: 0.1-0.44 m³ A 309 A 311 Operating Weight: 11,300-12,00 kg Engine Output: 6
More informationWheeled Excavator A 900 C. Operating Weight: 36,800-42,800 lb Engine Output: 95 kw / 129 HP Bucket Capacity: yd³
Wheeled Excavator A 9 C Operating : 36,8-42,8 lb Engine Output: 9 kw / 129 HP Bucket Capacity:.37-1. yd³ A 9 C Operating : 36,8-42,8 lb Engine Output: 9 kw / 129 HP Bucket Capacity:.37-1. yd³ 2 A 9 C Litronic
More informationWHEELED EXCAVATORS WX188 I WX218 MISSION ACCOMPLISHED
WHEELED EXCAVATORS WX188 I WX218 MISSION ACCOMPLISHED 2 WHEELED EXCAVATORS THE 8 SERIES POWER AND CONTROL The WX wheeled excavators are designed to deliver a axiu of productivity and precision. The extra
More informationEngine Output: 90 kw / 122 HP - 94 kw / 128 HP Bucket Capacity: m³
Wheeled Excavators A 314 A 316 Operating : 14,4-18,3 kg Engine Output: kw / 122 HP - 4 kw / 128 HP Bucket Capacity:.1 -. m³ A 314 Operational weight: 14,4-16,6 kg Engine output: kw / 122 HP Bucket capacity:.1
More informationSPECIFICATIONS UPPERSTRUCTURE ENGINE UNDERCARRIAGE HYDRAULIC SYSTEM SOUND LEVEL SERVICE REFILL CAPACITIES
SPCIFICATIONS NGIN Model... Isuzu AM-4HK1X Type... 4-cycle water-cooled, coon rail direct injection Aspiration... Variable geoetry turbocharged, intercooled, cooled GR Aftertreatent... Muffler filter No.
More informationLiebherr Specialist Machines. for Scrap Handling
Liebherr Specialist Machines for Scrap Handling 2 Handling scrap steel etal and other etals is one of the toughest operational areas in industrial aterial handling. To cope with this, robustness and reliability
More informationSPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E195C 96 kw hp Kg 0.24 m m 3
SPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY E195C 9 kw - 129 hp 20400 Kg 0.24 3-0.90 3 MORE PRODUCTIVITY Tier 4 interi engine and SCR technology, which optiizes cobustion, deliver
More informationSPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E175C 96 kw hp Kg 0.24 m m 3
SPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY E175C 96 kw - 129 hp 19180 Kg 0.24 3-0.90 3 E175C MORE PRODUCTIVITY Tier 4 interi engine and SCR technology, which optiizes cobustion,
More informationCrawler Excavator. Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Bucket Capacity: m³
Crawler Excavator R 934 C Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Bucket Capacity: 1.45-1.80 m³ R 934 C Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Bucket
More informationCrawler excavator R 936. Motor: 170 kw / 231 HP Stage IV / Tier 4f Operating Weight: 30,950 38,650 kg Bucket Capacity:
Crawler excaator R 936 Motor: 17 kw / 231 HP Stage I / Tier 4f Operating Weight: 3,95 38,65 kg Bucket Capacit: 1. 2.15 3 R 936 Litronic Motor: 17 kw / 231 HP Stage I / Tier 4f Operating Weight: 3,95 38,65
More information