LH 24 Industry LH 26 Industry

Transcription

1 Material Handling Machines LH Industry LH Industry Operating Weight,, kg Engine kw / HP kw / HP Stage IV

2 Perforance Power plus speed Redefined perforance Econoy Good investent Savings for long-ter LH M Industry Litronic Operating Weight,, kg* Engine kw / HP Stage IV LH M Industry Litronic Operating Weight,, kg* Engine kw / HP Stage IV * Without working tool LH Industry Litronic LH Industry Litronic

3 Reliability Durability and sustainability Quality down to the last detail Cofort Perfection at a glance When technology is cofortable Maintainability Efficiency bonus Even with aintenance and service LH Industry Litronic LH Industry Litronic

4 Perforance Power plus speed Redefined perforance Liebherr has been designing and anufacturing successful achines for aterial handling for over years. The new generation of Liebherr handlers, the LH and LH are high perforance yet econoical achines specially designed for using in scrap recycling, in tiber yards and also for handling of bulk aterials. LH Industry Litronic LH Industry Litronic

5 Maxiu Handling Capacity Precision Operation Increased Engine Output Engine output has been increased by kw copared to the predecessor odels, giving the syste ore torque for ore powerful and faster oveent. Furtherore, load peaks are copensated cleverly, eaning axiu torque is available at all ties for axiu handling capacity. High load capacities The intelligent arrangeent of the coponents in the new uppercarriage concept optiises the centre of gravity of the coplete achine. This allows greater load capacities while retaining copact diensions. Captivating Dynaics The cobination of an increased engine output and a higher pup delivery volue guarantees axiu acceleration and speed of working otions. Intelligent Electronics The elaborate achine controls guarantee that the hydraulics are optially configured for the task at hand. Here, the load sensing control ensures that the flow delivered by the pup is optially distributed when oveents overlap. Speed and power are available whenever they are needed. Sensitive Hydraulics The optial haronisation between the engine and the control valve allows a fast and direct response fro the hydraulics to the input coand. This is controlled proportionally to enable sooth and gentle oveents to be executed when the joy stick is oved. Fir and Stable Positioning An essential prerequisite for precise working and axiu handling capacity is the fir and stable positioning of the achine. The design of the Liebherr undercarriage optiises the way forces are induced on coponents and iniised stress. Together with the elaborate support geoetry, axiu stability and durability are guaranteed. Liebherr Diesel Engine Copliant with Stage IV Powerful, robust and reliable Maxiu torque even at low speeds to ensure fast oveents with low fuel consuption Coon rail injection syste for axiu efficiency Generator Twin-belt drive for good functional reliability High efficiency thanks to direct transission of the engine torque Optiised belt guidance for long service life Travel Motor Powerful, robust, reliable and quiet Better perforance even on uphill grades due to electrical swivel angle adjustent for ore torque, axiu acceleration and ore driving power Fuel efficiency at axiu speed due to optial adjustent of speed and delivery volue LH Industry Litronic LH Industry Litronic

6 Econoy Good investent Savings for long-ter Liebherr aterial handling achines cobine high productivity with excellent econoy all as standard. Liebherr anages to achieve this difficult goal through sophisticated engine technology fro its own production and iproved deand-controlled hydraulics. LH Industry Litronic LH Industry Litronic

7 Fuel Efficiency Increased Productivity Requireent-controlled cooling The vanes of the fan are driven regardless of the diesel engine, generating the exact cooling output that is actually required. Theral sensors guarantee reliable, need-based and efficient control. Engine Idling and Engine Shut-down The standard autoatic idling function reduces the engine speed to idle as soon as the operator takes his hand fro the joystick so that no hydraulic function is activated. Proxiity sensors in the joystick levers restore the original engine speed as soon as the operator s hand is oved towards the lever again. This ensures that the set engine speed is available iediately. The result is a cobination of fuel saving and reduced noise levels. Operating costs can be reduced even further with the optional autoatic engine shut-down function. Working Tools and Quick Coupling Systes Liebherr offers a wide selection of working tools for every application to increase the productivity of its aterial handling achines. In addition the aterial handlers can be fitted with a Liebherr quick coupling syste which increase the productivity of the achine by up to %. The atching working tool and quick coupling syste cobined with the outstanding dynaics of a Liebherr handler ensures highest handling capacity and axiu productivity. Efficient Manageent LiDAT, Liebherr s own data transission and positioning syste, facilitates efficient anageent, onitoring and control of the entire fleet park in ters of achinery data recording, data analysis, fleet park anageent and service. All of the iportant achinery data can be viewed at any tie in a web browser. LiDAT offers you coprehensive work deployent docuentation, greater availability thanks to shorter downties, faster support fro the anufacturer, quicker detection of strain / overload and subsequently a longer service life of the achine as well as greater planning efficiency in your copany. This service includes year of use without charge as standard for the aterial handlers LH and LH. Max Specific fuel consuption [g/kwh] Max Min Working range LPE Power [kw] Engine speed [rp] Perfect operating point with LPE Operating point without LPE Output Specific fuel consuption Low Fuel Consuption Thanks to Intelligent Machine Control Liebherr-Power Efficiency (LPE) optiises the interaction of the drive coponents in ters of efficiency LPE enables achine operation in the area of the lowest specific fuel use for less consuption and greater efficiency with the sae perforance Liebherr-Working Tools Robust and service-friendly slewing drive, can be turned Optiu filling and claping perforance for effective aterial handling Finite eleent ethod (FEM) optiised for a perfect relationship between grapple weight, volue and a very long service life Eco-Mode Reducing the engine speed by pressing a button Lower fuel consuption with unchanged high perforance Econoical and environentally friendly working guaranteed Ideal for light to ediu operations LH Industry Litronic LH Industry Litronic

8 Reliability Durability and sustainability Quality down to the last detail Every day Liebherr aterial handlers show their qualities in a very wide range of industrial applications all over the world. Years of experience, continuous developent and the latest technologies provide axiu safety in use. Their robust, copact design and the use of coponents produced in-house ensure that the aterial handling achines LH and LH are designed for a long service life. LH Industry Litronic LH Industry Litronic

9 More Safety High Machine Availability Pipe Fracture Safety Valves The standard pipe fracture safety valves on the stick and hoist cylinders prevents the attachents fro dropping in an unregulated way and ensure axiu safety during every operation. Working Range Liiters For operations in which the working range should be liited, the aterial handling achines can be equipped optional with a working range liitation feature. Hereby all types of diensions can be set: height, depth, width and proxiity. Collisions and resulting coponent daage can thus be avoided. Overload Warning Device and Load Torque Liitation The acoustic and visual overload warning syste continuously tells the operator about the current load situation of the achine. Furtherore, load torque liitation autoatically regulates the speed of the working hydraulics to allow the axiu load bearing capacity to be approached safely. In the event of an overload, the functions which could cause the achine to topple are disabled. Only oveents back to the safe working range are then possible. Quality and Copetence Our experience, understanding of custoer needs and the technical ipleentation of these findings guarantee the success of the product. For decades, Liebherr has been inspirational with its depth of production and syste solutions. Key coponents such as the diesel engine, electronic coponents, slewing ring, swivelling drive and hydraulic cylinders are developed and produced by Liebherr itself. The great depth of in-house anufacturing guarantees axiu quality and ensures that coponents are optially configured to each other. Robust Design All steel coponents are designed and anufactured by Liebherr itself. High-strength steel plates configured for the toughest of requireents result in high torsional stiffness and optiu absorption of forces induced for a longer service life. Intelligent Self Diagnostics The clever control electronics peranently onitor the vital functions of the achine to guarantee a high level of achine availability. Coponents which are critical for safety are designed with redundancy to guarantee axiu reliability. QPDM Quality and Process Data Manageent QPDM allows production data to be logged, docuented and evaluated Autoation of docuentation and test specifications Ability to handle large quantities with aintain unifor high quality Dust-intensive Jobs Large-diension radiator with large esh for optiu cooling perforance, even in extreely dust-intensive conditions Protective grille with fine esh, extending and folding for quick and easy cleaning Provision for the installation of filter systes on the cab Recycling package Reversible fan slows down the accuulation of dirt in the engine and radiator, guaranteeing high levels of achine availability Separate position of air conditioning copressor axiises the air strea in the radiator / fan unit and guarantees good reliability even in extreely dust-intensive conditions Air pre-filter with dust discharge for extra-fine filtration of the engine intake air LH Industry Litronic LH Industry Litronic

10 Cofort Perfection at a glance When technology is cofortable The newly designed operator s work station sets new standards in cofort. The Liebherr deluxe cab is spacious, has an ergonoic design and is very quiet. This ensures that the operator reains intent and fully concentrated throughout the working day and enables hi to deliver a constantly high perforance. LH Industry Litronic LH Industry Litronic

11 Deluxe Cab Cofortable Operation Ergonoic Design The odern cab design provides excellent conditions for healthy, concentrated and productive work in axiu cofort. The colour touchscreen display, the controls and operator s seat Cofort are all coordinated to for a perfect ergonoic unit. In addition the ergonoic joysticks allow the achine operation to be both pleasant and precise. Excellent All-round Vision The large areas of glass, different versions of cab elevations and the rear and side area onitoring systes provide the operator with an excellent view of his working area and the zone around the achine. This perfect view enhances the operator s safety and ensures that he can handle the achine safely at all ties. Low Noise Levels The use of viscoelastic ounts, good insulation and low-noise diesel engines fro Liebherr iniises noise eissions and vibrations. The noise levels are just db(a) in the operator s cab and db(a) outside. This eans that the aterial handlers LH and LH have low noise to preserve people and the environent. Proportional Control Precision and fine control of the aterial handling achine are especially iportant in applications such as waste separation or scrap recycling. Thanks to the standard proportional control, even such deanding operations can be astered in style. Steering and Stabilizer on Joystick The standard joystick steering gives the operator an additional cofort boost. The steering oveent can be conveniently executed using the joystick, eliinating the need to reposition during the work cycle. Abandoning the steering wheel in favour of joystick steering provides additional legroo and a clear view of the working area. A new standard feature is the control of the outriggers with the joystick for ore cofort and an increased productivity of the achine. Colour Touchscreen Display and Operation Unit The " colour touchscreen display is intuitive in its operation and provides continuous inforation about all iportant operating data. The shortcut keys can be individually assigned and are selected quickly and easily with the enu strip. Safe Access Foldable ar console for a safe and cofortable access Wide, non-slip steps and ergonoically positioned handles for an easy and safe access All access systes are designed to national guidelines and statutory regulations Elastic first step Operator s Seat Cofort with Adjustable Arrests Greater seating cofort due to variable daper hardness, lockable horizontal suspension, pneuatic lubar support, seat heating and passive seat air conditioning for concentrated working Individual adjustent options for arrests, seat cushion depth, seat angle and head restraint for healthful working Joystick with Proportional Control Good functionality with strealined, ergonoic design -way ini-joystick enables versatile possibilities of control without having to encopass, for exaple steering, outriggers or working tools Joysticks each with two buttons and a rocker switch also increase the nuber of functions and thanks to the new design axiu reliability is guaranteed LH Industry Litronic LH Industry Litronic

12 Maintainability Efficiency bonus Even with aintenance and service The Liebherr aterial handling achines LH and LH are powerful, robust, precise and efficient. They also feature integral aintenance benefits as a result of their service-based achine design. The aintenance work for the Liebherr aterial handlers can be carried out quickly, easily and safely. This iniises the aterial handling achine s aintenance costs and down ties. LH Industry Litronic LH Industry Litronic

13 Elaborate Maintenance Concept Your Copetent Service Partner Service-based Machine Design The service-based achine design guarantees short servicing ties, thus iniising aintenance costs due to the tie it saves. All the aintenance points are easily accessible fro the ground and easy to reach due to the large, wide-opening service doors. The enhanced service concept places the aintenance points close to each other and reduces their nuber to a iniu. This eans that service work can be copleted even ore quickly and efficiently. Integral Maintenance Benefits Copleting aintenance work helps keep the achine fully functional. Maintenance work does, however, ean achine down ties which ust be iniised. With change intervals of up to, hours for engine oil and up to, hours for hydraulic oil Liebherr reduce the aount of aintenance significantly and increase the productivity of the aterial handlers. In addition, central lubrication systes assist to optiise the daily aount of aintenance. Reanufacturing The Liebherr reanufacturing progra offers cost-effective reconditioning of coponents to the highest quality standards. Various reconditioning levels are available: Replaceent coponents, general overhaul or repair. The custoer receives coponents with original part quality at a reduced cost. Copetent Advice and Service Copetent advice is a given at Liebherr. Experienced specialists provide decision guidance for your specific requireents: application-oriented sales support, service agreeents, value-priced repair alternatives, original parts anageent, as well as reote data transission for achine planning and fleet anageent. Lubrication as it Works Fully autoatic central lubrication syste for uppercarriage and attachent Can be extended as an option to the connection link, quick coupler and working tool Fully autoatic central lubrication syste for the undercarriage available as an option Lubricates without interrupting work to ensure better productivity and a long coponent service life Excellent Service Access Large, wide-opening service doors Engine oil, fuel, air and cab air filters are easily and safely accessible fro the ground The oil level in the hydraulic tank can be checked fro the cab Short service ties for ore productivity Rapid Spare Parts Service -hour delivery: Spare parts service is available for our dealers around the clock Electronic spare parts catalogue: Fast and reliable selection and ordering via the Liebherr online portal With online tracking, the current processing status of your order can be viewed at any tie LH Industry Litronic LH Industry Litronic

14 Material Handling Machines Overview Operator s Cab Joystick steering without steering colun as standard for convenient operation, greater legroo and clear view of the working area Less strain on the operator, workers and reduced environental pollution due to lower noise eissions Optiu visibility thanks to large glass surfaces and standard rear and side area onitoring with caera Proportional control as standard with -way inijoystick for greater precision, high-precision control and functions Attachent High load capacities and long reaches thanks to optiised kineatic properties and robust construction for greater handling perforance Ingenious routing of hydraulic hoses optiises the oil flow and iniises power losses for axiu energy efficiency Pipe fracture safety valves on hoist and stick cylinders and retract stick shut-off for axiu safety during every application Quick coupling systes and working tools ade by Liebherr for axiu achine capacity utilisation and greater handling perforance LH Industry Litronic LH Industry Litronic

15 Uppercarriage Greater fuel efficiency thanks to the latest engine technology with intelligent achine control Recycling package for high levels of achine availability even in extreely dust-intensive conditions New uppercarriage concept for greater load capacities and optiu service access Optiised hydraulics for greater fuel efficiency and faster work cycles Undercarriage Maxiu acceleration and higher drawbar pull thanks to a new travel otor for greater travelling perforance Load-holding valves fitted as standard on all support cylinders for axiu stability in every application Fewer downties thanks to aintenance-free support cylinders Undercarriage variants with dozer blade for universal operation of the aterial handling achine LH Industry Litronic LH Industry Litronic

16 The Perfect Solution for Every Application Shells for loose aterial H Anbaugerät Greifer GM C. H übergreifend Angled stick Multi-tine grab H Scherenstiel, Kippzylinder.. Wood grab Flat angled stick Straight boo H Sorting grab Industriestiel, Kippkineatik.. Stick for scrap shear Angled boo Stick with tipping kineatics Two-piece boo Load hook Magnet devices Working tools LH Industry Litronic LH Industry Litronic Sticks Boos

17 Cab Elevations Hydraulic cab elevation Rigid cab elevation H Uppercarriage H Mobile, point outriggers Mobile, dozer blade point outriggers Undercarriage LH Industry Litronic LH Industry Litronic

18 Technical Data Diesel Engine Rating per ISO LH LH Model Type Bore / Stroke Displaceent Engine operation Air cleaner Engine idling Electrical syste Voltage Batteries Alternator Stage IV Harful eissions values Eission control Option Fuel tank Urea tank Hydraulic Syste kw ( HP) at, RPM kw ( HP) at, RPM Liebherr D cylinder in-line /. l -stroke diesel Coon-Rail turbo-charged and after-cooled reduced eissions dry-type air cleaner with pre-cleaner, priary and safety eleents sensor controlled V x Ah / V three-phase current V / A in accordance with //EG stage IV Liebherr-SCR technology Liebherr particle filter l l Hydraulic pup for attachent and travel drive Max. flow Max. pressure Hydraulic pup regulation and control Hydraulic tank Hydraulic syste Hydraulic oil filter MODE selection S (Sensitive) E (Eco) P (Power) P (Power-Plus) Cooling Syste Diesel engine water-cooled copact cooling syste consisting cooling unit for water, hydraulic oil and charge air with stepless therostatically controlled fan, fans for radiator cleaning can be copletely folded away Engine speed and perforance setting Option Liebherr axial piston variable displaceent pup l/in. bar Liebherr-Synchron-Cofort-syste (LSC) with electronic engine speed sensing regulation, pressure and flow copensation, torque controlled swing drive priority l l ain return filter with integrated partial icro filtration ( µ) adjustent of engine and hydraulic perforance via a ode pre-selector to atch application, e.g. for especially econoical and environentally friendly operation or for axiu aterial handling and heavy-duty jobs ode for precision work and lifting through very sensitive oveents ode for especially econoical and environentally friendly operation ode for high perforance with low fuel consuption ode for highest perforance and for very heavy duty applications, suitable for continuous operation stepless alignent of engine output and hydraulic power via engine speed Tool Control: ten preadjustable pup flows and pressures for add on tools Swing Drive Drive Hydraulic Controls Power distribution Servo circuit Attachent and swing Chassis Additional functions Proportional control Swing ring via control valves with integrated safety valves, siultaneous and independent actuation of chassis, swing drive and attachent Swing speed Swing torque Holding brake with hydraulic pilot control and proportional joystick levers electroproportional via foot pedal via switch or electroproportional foot pedals proportionally acting transitters on the joysticks for additional hydraulic functions Option LH Industry Litronic LH Industry Litronic Liebherr axial piston otor with integrated brake valve and torque control Liebherr, sealed race ball bearing swing ring, internal teeth. RPM stepless kn wet ulti-disc (spring applied, pressure released) pedal controlled positioning swing brake

19 Operator s Cab Cab Operator s seat Cofort Option Preiu Control syste Operation and displays Air-conditioning TOPS safety cab structure (tip-over protection) with individual windscreens or featuring a slidein subpart under the ceiling, work headlights integrated in the ceiling, a door with a sliding window (can be opened on both sides), large stowing and depositing possibilities, shock- absorbing suspension, sounddaping insulating, tinted lainated safety glass, separate shades for the sunroof window and windscreen air cushioned operator s seat with D-adjust able arrests, headrest, lap belt, seat heater, adjustable seat cushion inclination and length, lockable horizontal suspension, autoatic weight adjustent, adjustable suspension stiffness, pneuatic lubar vertebrae support and passive seat cliatisation with active coal in addition to operator s seat cofort: active elec tronic weight adjustent (autoatic re adjustent), pneuatic low frequency suspension and active seat cliatisation with active coal and ventilator joysticks with ar consoles and swivel seat, folding left ar console large high-resolution operating unit, selfexplanatory, colour display with touchscreen, video- copatible, nuerous setting, control and onitoring options, e.g. air conditioning control, fuel consuption, achine and tool paraeters autoatic air-conditioning, recirculated air function, fast de-icing and deisting at the press of a button, air vents can be operated via a enu; recirculated air and fresh air filters can be easily replaced and are accessible fro the outside; heating-cooling unit, designed for extree outside teperatures, sensors for solar radiation, inside and outside teperatures Undercarriage Drive Travel speed Joystick steering Option Wheel steering Driving operation Axles Service brake Holding brake Stabilization Option oversized two speed power shift transission with additional creeper speed, Liebherr axial piston otor with functional brake valve on both sides. k/h stepless (creeper speed transission stage ). k/h stepless (transission stage ). k/h stepless (creeper speed transission stage ). k/h stepless (transission stage ). k/h stepless (creeper speed transission stage ). k/h stepless (transission stage ) k/h stepless (creeper speed transission stage ). k/h stepless (transission stage ) autootive driving using accelerator pedal, cruise control function: storage of variable accelerator pedal positions t drive axles; anual or autoatic hydraulically controlled front axle oscillation lock two circuit travel brake syste with accuulator; wet and backlash-free disc brake wet ulti-disc (spring applied, pressure released) stabilizing blade point outriggers point outriggers dozer blade, at the front, for point outriggers Coplete Machine Lubrication Option Attachent Type Hydraulic cylinders Bearings high-strength steel plates at highlystressed points for the toughest requireents. Coplex and stable ountings of attachent and cylinders Liebherr cylinders with special seal syste as well as shock absorption sealed, low aintenance Steps syste Noise eission ISO //EC Liebherr central lubrication syste for uppercarriage and attachent, autoatically Liebherr central lubrication syste for undercarriage, autoatically safe and durable access syste with anti-slip steps ain coponents hot-galvanised = db(a) L pa (inside cab) LWA (surround noise) = db(a) LH = db(a) LH LH Industry Litronic LH Industry Litronic

20 LH M Diensions LH H LH M Choice of Cab Elevation Cab Elevation LFC (Rigid Elevation) Cab Elevation LHC (Hydraulic Elevation) D D D C C B B LH LH C H Increase type LFC Height, B, C, D A rigid cab elevation has a fixed eye level height. For a lower transport height, the shell of the cab can be reoved and replaced by a transport device. The diension C is in this achine design for all rigid cab elevations,. Tyres.- LH Industry Litronic LH Industry Litronic B E H Increase type LHC B, B, C, C, D, D, E, The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any tie within the stroke.

21 LH M Diensions LH H LH M Choice of Cab Elevation Cab Elevation LFC (Rigid Elevation) Cab Elevation LHC (Hydraulic Elevation) D D D C C B B LH LH C H Increase type LFC Height. B. C. D A rigid cab elevation has a fixed eye level height. For a lower transport height, the shell of the cab can be reoved and replaced by a transport device. The diension C is in this achine design for all rigid cab elevations,. B E H Increase type LHC B B. C. C. D. D. E The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any tie within the stroke. Tyres.- LH Industry Litronic LH Industry Litronic

22 LH M Attachent GA H Operating Weight The operating weight includes the basic achine with point outriggers, hydr. cab elevation, solid tyres plus interediate rings, straight boo., angled stick. and grab odel GM /. sei-closed tines. Weight, kg Diensions LH LH - - H ft ft..... Undercarriage Height. *.*.* * *.*.* * *.*.* * *.*.* Can be slewed through..*..*..*..*..*. *. *..*..*.*.*.*.*..*..*..*. *. *..*..*..*..*.*..*.....*..*..*..*..*..*..*..*..* * In longitudinal position of undercarriage.*..*..*.*..*.*.* *..*..* *.*.*..*..*.* Max. reach.*.*..*.*.*.*..*.*...* * Liited by hydr. capacity The lift capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hydraulic capacity. The lift capacity of the unit is liited by its stability, the lifting capability of the hydraulic eleents, or the axiu perissible lifting capacity of the load hook. In accordance with the haronised European Standard EN -, hydraulic excavators used for lifting operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH Industry Litronic LH Industry Litronic

23 LH M Attachent GA H. Operating Weight The operating weight includes the basic achine with point outriggers, hydr. cab elevation, solid tyres plus interediate rings, straight boo., angled stick. and grab odel GM /. sei-closed tines. Weight Diensions - -, kg LH LH H ft ft..... Undercarriage Height..*..*.*.* * *..*.*.* * * Can be slewed through..*..*. *.*..*.*.*..*..*. *..*..*..*..*..*..*..* *..*..*..*..*..*..*..*..*.*.*.*..*..* In longitudinal position of undercarriage.*.*.*.*..*.*.*..*..* *.*.*..*.*.*..* Max. reach *..*..*.*.* *..*.*.*. * *. *.*.*..*.*. * * *. *.* *.* * * Liited by hydr. capacity The lift capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hydraulic capacity. The lift capacity of the unit is liited by its stability, the lifting capability of the hydraulic eleents, or the axiu perissible lifting capacity of the load hook. In accordance with the haronised European Standard EN -, hydraulic excavators used for lifting operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH Industry Litronic LH Industry Litronic

24 LH M Attachent AF H Operating Weight The operating weight includes the basic achine with point outriggers, hydr. cab elevation, solid tyres plus interediate rings, angled boo., flat angled stick. and grab odel GM B /. shells for loose aterial. Weight Diensions - - LH, kg LH H ft ft..... Undercarriage Height..*.*.*.*.*.*.*.*.*.*.*.*.*.*.* Can be slewed through..*..*. *..*..*..*.*.*..*. *..*..*..*...*..*..*..*..*......*..*..*..*..*..*..*..*..*..*..*..*..* In longitudinal position of undercarriage..*..*.*.*..*.*.*.*.* *.*.*..*.*.* Max. reach...*..*.*. * *. *....*.* * * *..*.*. * * Liited by hydr. capacity The lift capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hydraulic capacity. The lift capacity of the unit is liited by its stability, the lifting capability of the hydraulic eleents, or the axiu perissible lifting capacity of the load hook. In accordance with the haronised European Standard EN -, hydraulic excavators used for lifting operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH Industry Litronic LH Industry Litronic

25 LH M Attachent VK H Operating Weight The operating weight includes the basic achine with point outriggers, hydr. cab elevation, solid tyres plus interediate rings, two-piece boo, stick with tipping kineatics and sorting grab SG B /. perforated shells. Weight, kg Diensions LH LH H ft ft..... Undercarriage Height.*. *...*..*..* * *..*.*.* Can be slewed through.*.*..*..*..*..*..*..*..*.*.*.*.*..*..*..*..*..*..*.*.*.*.*....*.*.*.*..*..*..*..*..*..*..*..... In longitudinal position of undercarriage.*.*.*.*. * * *.*.*. *.*..*..*..*.*..*.* Max. reach.*.*.*.* * * * * * *.*.*. *..*.*.* * Liited by hydr. capacity The lift capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values apply with the optiu positioning of the two-piece boo. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hydraulic capacity. The lift capacity of the unit is liited by its stability, the lifting capability of the hydraulic eleents, or the axiu perissible lifting capacity of the load hook. In accordance with the haronised European Standard EN -, hydraulic excavators used for lifting operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH Industry Litronic LH Industry Litronic

26 LH M Attachent GK H. Operating Weight The operating weight includes the basic achine with point outriggers, hydr. cab elevation, solid tyres plus interediate rings, straight boo., stick with tipping kineatics. and sorting grab SG B /. perforated shells. Weight, kg Diensions LH ft H LH. ft..... Undercarriage Height.*.*.*.*..*.*.*..*.*.*.*.*.*.*..*.*.*.*.* Can be slewed through..*..*..*..*.*..*.*.*.*.*..*..*..*..*..*..*.*.*..*.*.....*..*..*..*..*..*..*..*..*.*.* In longitudinal position of undercarriage.*..*.*.*.*..*..*.*.* *.*.*.*..* Max. reach....*..*.*..*.* *..*.*.*..*.*..*.*..* *..*.* * Liited by hydr. capacity The lift capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hydraulic capacity. The lift capacity of the unit is liited by its stability, the lifting capability of the hydraulic eleents, or the axiu perissible lifting capacity of the load hook. In accordance with the haronised European Standard EN -, hydraulic excavators used for lifting operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH Industry Litronic LH Industry Litronic

27 LH M Attachent GK H. Operating Weight The operating weight includes the basic achine with point outriggers, hydr. cab elevation, solid tyres plus interediate rings, straight boo., stick with tipping kineatics. and sorting grab SG B /. perforated shells. Weight, kg Diensions LH ft H LH.. ft..... Undercarriage Height..*..*.*.*.*.*.*.*.*.* Can be slewed through..*..*..*.*..*.*.*.*.*.*.*.*..*..*..*..*..*..*.*.*..*.*......*..*..*..*..*..*..*..*.*..* In longitudinal position of undercarriage..*..*.*..*.*..*.*.* *.*.*..*.*.. * Max. reach *..* * *..*..* *..*.*.*.*.*.*..*. *. *..* * Liited by hydr. capacity The lift capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hydraulic capacity. The lift capacity of the unit is liited by its stability, the lifting capability of the hydraulic eleents, or the axiu perissible lifting capacity of the load hook. In accordance with the haronised European Standard EN -, hydraulic excavators used for lifting operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH Industry Litronic LH Industry Litronic

28 LH M Attachent GA H. Operating Weight The operating weight includes the basic achine with point outriggers, hydr. cab elevation, solid tyres plus interediate rings, straight boo., angled stick. and grab odel GM /. sei-closed tines. Weight Diensions - -, kg LH LH H ft ft..... Undercarriage Height.*.*..*.*.* * *.*.*.*.* * * Can be slewed through..*..*. *..*..*.*.*.*.*..*. *..*.*.*..*..*..*..*..*..*.*..*.*.*.*.*.*.*..*..*..*..*..*..*..*..*.*..*..*.*..*......*. In longitudinal position of undercarriage.*.*..*..*..*..*..*..*.*..* *.*.*.*.*.*..*..* Max. reach... *.*...*.*.* *.*.*.*.*. * * *... *.* *.*.*.*.*.*. * * * *.* *.* * * Liited by hydr. capacity The lift capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hydraulic capacity. The lift capacity of the unit is liited by its stability, the lifting capability of the hydraulic eleents, or the axiu perissible lifting capacity of the load hook. In accordance with the haronised European Standard EN -, hydraulic excavators used for lifting operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH Industry Litronic LH Industry Litronic

29 LH M Attachent GA H. Operating Weight The operating weight includes the basic achine with point outriggers, hydr. cab elevation, solid tyres plus interediate rings, straight boo., angled stick. and grab odel GM /. sei-closed tines. Weight, kg Diensions LH - - H LH ft ft..... Undercarriage Height.*.*.*.* * *.*.*.*.*.*.* * *.*.*.*.* Can be slewed through..*..*..*..*..*..*.*.*.*.*..*..*..*.*.*.*.*..*..*..*..*..*..*..*..*.*..*.*.*.*.*.*..*..*..*..*..*..*..*..*..*.*..*.*.*.*......*.* In longitudinal position of undercarriage..*..*..*..*..*..*.*..*..*.*..* * *.*.*.*..*.*..*..*.* * Max. reach..... *...*..*.*.*.*. *...*.* * *...*. * *.*..*. *. *. * *.*.*. * * * Liited by hydr. capacity The lift capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hydraulic capacity. The lift capacity of the unit is liited by its stability, the lifting capability of the hydraulic eleents, or the axiu perissible lifting capacity of the load hook. In accordance with the haronised European Standard EN -, hydraulic excavators used for lifting operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH Industry Litronic LH Industry Litronic

30 LH M Attachent GA H Operating Weight ft The operating weight includes the basic achine with point outriggers, hydr. cab elevation, solid tyres plus interediate rings, straight boo., angled stick. and grab odel GM /. sei-closed tines. Weight Diensions LH H LH., kg. ft..... Undercarriage Height..* * *.*.*.*.*.*.* * *.*.*.*.* Can be slewed through..*..*. *..*..*.*.*..*. *.*.*.*.*..*..*..*..*..*..*..*.*.*.*.*.*.*.*.*.*.*.*.*..*..*..*..*..*..*..*..*..*..*.*..* * In longitudinal position of undercarriage..*..*..*..*..*..*.*..*.*.*..*.*..* *.*.*.*..*.*..*..*.* Max. reach *.*.*..*.*.*..*..*....*.* * *.*.*..* *.* *. * *..... * *..*.*.*.*.* *.* *. * * * * * *.* * Liited by hydr. capacity The lift capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hydraulic capacity. The lift capacity of the unit is liited by its stability, the lifting capability of the hydraulic eleents, or the axiu perissible lifting capacity of the load hook. In accordance with the haronised European Standard EN -, hydraulic excavators used for lifting operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH Industry Litronic LH Industry Litronic

31 LH M Attachent AF H. Operating Weight The operating weight includes the basic achine with point outriggers, hydr. cab elevation, solid tyres plus interediate rings, angled boo., flat angled stick. and grab odel GM B /. shells for loose aterial. Weight ft Diensions LH H LH., kg. ft..... Undercarriage Height..*.*.*.*.*.*.*.*.*.*.*.*.*.*.* Can be slewed through..*..*. *..*..*..*.*.*..*. *..*..*..*..*..*..*..*..*..*.*..*..*.*.*.*.*.*.*..*..*..*..*..*..*..*..*..*.*..*.....* In longitudinal position of undercarriage.*.*..*..*..*..*..*..*.*.*.* *.*.*..*.*.* Max. reach.*..*..*.*.*. * * *.*. *.*.* *. * *..*..* * * Liited by hydr. capacity The lift capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hydraulic capacity. The lift capacity of the unit is liited by its stability, the lifting capability of the hydraulic eleents, or the axiu perissible lifting capacity of the load hook. In accordance with the haronised European Standard EN -, hydraulic excavators used for lifting operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH Industry Litronic LH Industry Litronic

32 LH M Attachent GK H. Operating Weight The operating weight includes the basic achine with point outriggers, hydr. cab elevation, solid tyres plus interediate rings, straight boo., stick with tipping kineatics. and sorting grab SG B /. perforated shells. Weight, kg ft Diensions LH H. LH.. ft..... Undercarriage Height.*.*..*.*.*.*.*.*.*.*.* Can be slewed through..*..*..*..*..*..*.*.*.*.*.*.*..*..*..*.*.*.*.*..*..*..*..*..*.*..*..*.*..*..*..*..*..*..*..*..*..*.*.*.*..*.....* In longitudinal position of undercarriage..*..*..*..*.*..*..*.* *.*.*.*..*.* * Max. reach *..*..* * *.*.*.*.*.. * *..*.*.*..*.*.*..* *. *.* * Liited by hydr. capacity The lift capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO standard and do not exceed % of tipping or % of hydraulic capacity. The lift capacity of the unit is liited by its stability, the lifting capability of the hydraulic eleents, or the axiu perissible lifting capacity of the load hook. In accordance with the haronised European Standard EN -, hydraulic excavators used for lifting operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH Industry Litronic LH Industry Litronic

33 Machine Stabilities Sorting Grabs LH M Max. Material Weight in t/ Grab Shell type Capacity Direct ounting with ounting plate Blade pt. outriggers down GK GK VK GK GK VK SG B perforated..... SG B perforated..... SG B perforated..... SG B perforated.... SG B ribbed..... SG B ribbed..... SG B ribbed SG B closed SG B closed..... SG B closed..... SG B closed.... = Load values at axiu outreach insufficient Mounting with SWA Blade pt. outriggers down GK GK VK GK GK VK LH M Max. Material Weight in t/ Grab Shell type Capacity SG B perforated. SG B perforated. SG B perforated. SG B perforated. SG B ribbed. SG B ribbed. SG B ribbed. SG B closed. SG B closed. SG B closed. SG B closed. = Load values at axiu outreach insufficient Direct ounting with ounting plate Blade pt. outriggers down GK GK Mounting with SWA Blade pt. outriggers down GK GK LH Industry Litronic LH Industry Litronic

34 LH Industry Litronic LH Industry Litronic Cooling Syste Radiator, large-esh, for dust-intensive operation Reversible fan drive, fully autoatic Protective grid (close-esh) in front of cooler intake, extendible M M M Uppercarriage Uppercarriage rear light, pieces, LED Uppercarriage right side light, piece, LED Refuelling syste with filling pup Generator Main battery switch for electrical syste Recycling package Warning beacon on uppercarriage, LED Protection for headlights Protection for rear lights Tool equipent, extended M Engine Fuel anti-theft device Autoatic engine shut-down (tie adjustable) Preheating fuel Preheating coolant * Preheating engine oil * M Hydraulic Syste Electronic pup regulation Liebherr hydraulic oil fro C to C Liebherr hydraulic oil, biologically degradable Magnetic rod in hydraulic tank Bypass filter Preheating hydraulic oil M M M M Undercarriage Individual control outriggers Shuttle axle lock, autoatic Outrigger onitoring syste Dozer blade Tyres, variants Protection for travel drive Protection for piston rods, outriggers Undercarriage, variants Two lockable storage boxes M Equipent

35 Coplete Machine Lubrication Lubrication undercarriage, anually decentralised (grease points) Lubrication undercarriage, anually centralised (one grease point) Central lubrication syste for uppercarriage and attachent, autoatically Central lubrication syste for undercarriage, autoatically Central lubrication syste, extension for tool attachent Special coating, variants Monitoring Rear view onitoring with caera Side view onitoring with caera M Attachent Boo lights, pieces, halogen Boo lights, pieces, LED Stick lights, pieces, halogen Stick lights, pieces, LED Filter syste for working tool Height liitation and stick shutoff, electronically Boo cylinder cushioning Stick caera (with separate onitor), botto side, with protection Liebherr ulti coupling syste Liebherr quick coupler, hydraulic Pipe fracture safety valves hoist cylinders Pipe fracture safety valves stick cylinders Quick coupling syste LIKUFIX Protection for piston rods, hoist cylinder Overload warning device M M M M M Operator s Cab Stabilizer, proportional control on left joystick Cab lights front, halogen Cab lights front, halogen (under rain cover) Cab lights front, LED Cab lights front, LED (under rain cover) Left ar console, folding Arrest adjustable Slewing gear brake Cofort, button on the left or right joystick Operator s seat Cofort Operator s seat Preiu Driving alar (acoustic signal is eitted during travel, can be switched ON / OFF) Fire extinguisher Footrest Horn, button on left joystick Joystick steering (ax. k/h) Joystick and wheel steering (sli version) Cab elevation, hydraulic (LHC) Cab elevation, rigid (LFC) Autoatic air conditioning Wheel steering (sli version) LiDAT, vehicle fleet anageent Proportional control Radio Cofort, control via display with handsfree set Preparation for radio installation Back-up alar (acoustic signal is eitted traveling backward, can not be switched off) Warning beacon on cab, LED Windows ade fro ipact-resistant lainated safety glass Windscreen wiper, roof Windshield wiper, entire windscreen Top guard Front guard, adjustable Sun visor Flashing light (xenon) = Standard, = Option * = country-dependent Options and / or special attachents, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty. LH Industry Litronic LH Industry Litronic

36 Working Tools H Shells for Loose Material Shells for loose aterial with cutting edge (without teeth) Grab odel GM B Width of shells, Capacity. Weight kg, H Multi-Tine Grab Grab odel GM ( tines) Capacity Weight kg Grab odel GM ( tines) Capacity Weight kg,,,., open,, sei-closed,, closed....,.,.,.,.,.,.,.,., H Wood Grab H.,,,, Sorting Grab perforated ribbed closed perforated ribbed closed perforated ribbed closed perforated closed Grab odel SG B Width of shells Capacity Max. closing force kn Weight incl. adapter plate SWA kg.,.,.,,.,,.,,.,,.,,.,,.,,.,,., Load Hook with Suspension Max. load t. Height with suspension Weight kg Magnet Devices / Lifting Magnets Generator kw Electroagnets with suspension Power kw Diaeter of agnet Weight kg * only agnet plate Liebherr-Hydraulikbagger GbH Liebherrstraße, D- Kirchdorf / Iller S -, Fax info.lhb@liebherr.co Printed in Gerany by Schirer RG-BK LHB/VF--.-._enGB All illustrations and data ay differ fro standard equipent. Subject to change without notice. Grab odel GM B round-shaped (coplete overlapping, vertical cylinders) Size. Cutting width Height of grab, closed, Weight kg,