Crawler excavator R 946. Motor: 220 kw / 299 HP Stage IV / Tier 4f Operating Weight: 38,750 47,800 kg Bucket Capacity:

Size: px

Start display at page:

Download "Crawler excavator R 946. Motor: 220 kw / 299 HP Stage IV / Tier 4f Operating Weight: 38,750 47,800 kg Bucket Capacity:"

Jeffry Strickland
6 years ago
Views:

1 Crawler excaator R 96 Motor: 22 kw / 299 HP Stage I / Tier f Operating Weight: 38,7 7,8 kg Bucket Capacit:

2 R 96 Litronic Motor: 22 kw / 299 HP Stage I / Tier f Operating Weight: 38,7 7,8 kg Bucket Capacit: ³ Perforance Perforance, precision and responsieness 2 R 96 Litronic

3 Efficienc High leel of productiit for a lower oerall operating cost Reliabilit Result of ongoing iproeents Cofort Spacious, ergonoic and with high-isibilit Maintainabilit Siplified dail checks, longer aintenance interals R 96 Litronic 3

4 Perforance Perforance, precision and responsieness R 96 Litronic

Adanced techniques heighten perforance In its design offices, Liebherr cobines the technological knowhow of each area to create consistent and optiised integrated sstes.

Positie Control hdraulic sste Two working pups for axiu excaation power and trael power, and a pup sering the rotation circuit proides power to the coponents inoled.

Particularl fast work ccles The work ccles of the R 96 are er fast thanks to the large sized transission coponents.

5 Adanced techniques heighten perforance In its design offices, Liebherr cobines the technological knowhow of each area to create consistent and optiised integrated sstes. Liebherr s electronics, positie control hdraulics, and een the engines are designed fro the start to be interconnected and generate optiu operating power with fast and fluid oeents. Positie Control hdraulic sste Two working pups for axiu excaation power and trael power, and a pup sering the rotation circuit proides power to the coponents inoled. Thanks to the positie control sste, the cobined oeents are optiised for each different work operation, whether this be leelling, extraction / loading or lifting, with or without trael. Particularl fast work ccles The work ccles of the R 96 are er fast thanks to the large sized transission coponents. For exaple, the uppercarriage s swing drie can quickl reach its axiu speed with a high swing torque. Operating pressure Maxiu digging and break-out forces can be reached thanks to the leel of hdraulic pressure, without appling teporar oerpressure. Maxiu forces are therefore guaranteed continuousl during the whole working phase to achiee a high leel of production. Liebherr Engine New Final Tier / Stage I engine with SCR exhaust gas after-treatent sste Designed specificall for construction applications Liebherr Coon-Rail injection sste for optiised output Autoatic fuel-saing idling sste Two-stage turbocharging with intercooler, for increased power at low res and reduced fuel consuption Robust design for greater resistance and a better distribution of forces Eas and safe transport thanks to integrated securing hooks Three different tpes of undercarriages, one with ariable gauge, adapted to different operating configurations and transport conditions Wide range of operational possibilities Large nuber of equipent ariants ersatile selection of undercarriage ariants Attachents for all applications: short attachents for ass extractions, and longreach, standard, luffing jib attachents R 96 Litronic

6 Efficienc High leel of productiit for a lower oerall operating cost 6 R 96 Litronic

Less fuel The new 6-clinder Liebherr engine, pursuant to the Final Tier / Stage I eission standards, coprises a diesel exhaust fluid injection deice (SCR) for the after-treatent of exhaust gases,

Increased productiit Clearl enhanced perforance and lower consuption, all in a cofortable and ergonoic work enironent, lead to rearkable gains in productiit in all operating configurations.

The absence of a particle filter reduces aintenance tie, the cost of spare parts and filter regeneration operations.

7 Less fuel The new 6-clinder Liebherr engine, pursuant to the Final Tier / Stage I eission standards, coprises a diesel exhaust fluid injection deice (SCR) for the after-treatent of exhaust gases, with no need for a particle filter. Associated with the latest technological adances in hdraulics, this engine consues less fuel, both in ters of hours of operation and in ters of tons of aterial oed. Increased productiit Clearl enhanced perforance and lower consuption, all in a cofortable and ergonoic work enironent, lead to rearkable gains in productiit in all operating configurations. Siplified and lower-cost aintenance Non-slip platfors and ergonoic handles allow fast and eas access to all aintenance points not accessible fro the ground. The absence of a particle filter reduces aintenance tie, the cost of spare parts and filter regeneration operations. Electronic power control This control sste allows the engine power to be effectiel and optiall conerted, fro an energetic point of iew, into hdraulic power. This is as a result of greater forces, a faster working speed and a lower fuel consuption. Liebherr Lubricants Liebherr lubricants are speciall deeloped for application in Liebherr earth oing and aterial handling achines and guarantee a long working life whilst siultaneousl deliering the highest possible perforance Being designed especiall for our Liebherr achines, Liebherr lubricants contribute significantl to lowering our operating and aintenance costs. Liebherr tools Wide range of tools suitable for eer tpe of application Tools designed for axiu productiit and durabilit Shape of buckets designed to assist the filling and stabilit of bulk aterials during the transport stages Hdraulic quick coupler sste Modular quick-change sste ade b Liebherr Likufix connects all hdraulicall ounted tools without haing to leae the operator s cab, axiu productiit due to tool change being perfored in a atter of seconds The suitable digging tool for eer application. Your achine is a ultifunctional tool carrier and will pa for itself er quickl indeed Mechanic and hdraulic Liebherr quick-change adapter R 96 Litronic 7

8 Reliabilit Result of ongoing iproeents 8 R 96 Litronic

Qualit in the inutest details Robust and large-sized coponents, optial fitting of electrical and hdraulic lines, or an exeplar leel of finishing are just soe of the an criteria that ensure a axiu

The sae qualit can thus be guaranteed for all special colours specificall requested b the ost exacting custoers.

Perfect atch The indiidual coponents of the power train, such as the diesel engine, gears, swing drie, working pups and hdraulic clinders are designed and anufactured b Liebherr.

Autoatic control of functionalit The operator can entirel focus on his job, because the integrated on-board electronic continuousl perfors a coparison with pre-deterined target data.

9 Qualit in the inutest details Robust and large-sized coponents, optial fitting of electrical and hdraulic lines, or an exeplar leel of finishing are just soe of the an criteria that ensure a axiu qualit of anufacture and operabilit. A top-of-the-range anti-corrosion protection A pre-assebl painting process guarantees that all painted parts are full coated. The sae qualit can thus be guaranteed for all special colours specificall requested b the ost exacting custoers. This process is also copatible with additional protection treatents for achines operating in an aggressie saline enironent. Perfect atch The indiidual coponents of the power train, such as the diesel engine, gears, swing drie, working pups and hdraulic clinders are designed and anufactured b Liebherr. This eans that the are all copatible with each other in a global sste, guaranteeing greater reliabilit and a longer serice life. Autoatic control of functionalit The operator can entirel focus on his job, because the integrated on-board electronic continuousl perfors a coparison with pre-deterined target data. Eentual deiations fro the target paraeters are shown on the displa. SCR sste with diesel exhaust fluid (AdBlue ) Diesel exhaust fluid leel indicator on the displa Liebherr design Coplies with Final Tier / Stage I standard No need for particle filters (DPF) Siple sste for enhanced reliabilit and less aintenance Ke technologies Made b Liebherr Perfect atching of the coponents to construction achine operations Engine, hdraulic pups, transfer gears, trael dries, slewing dries, slewing rings, and electronic coponents all fro the sae source Main steel coponents, such as undercarriage, equipent odules, and slewing superstructure, all designed b Liebherr Spare parts serice An spare parts required are aailable within 2 hours worldwide. And that eans high operational readiness of the achines, whereer, wheneer Oer 8, spare parts in stock at all ties R 96 Litronic 9

10 Cofort Spacious, ergonoic and with high-isibilit 1 R 96 Litronic

A first class work space In this cab, the operator has a pneuatic seat, lots of space and a er cofortable work enironent.

This seat offers axiu seating cofort thanks to its pneuatic lubar support, its electronic weightactuated height adjustor and its air-conditioning with actiated charcoal and built-in fan.

Low noise leel and ibrations To diinish fatigue at work and increase productiit, the acoustic power inside the operator s cab is lower than 72 db.

11 A first class work space In this cab, the operator has a pneuatic seat, lots of space and a er cofortable work enironent. Depending on the operator s needs, the Liebherr Preiu seat can also be chosen as an option. This seat offers axiu seating cofort thanks to its pneuatic lubar support, its electronic weightactuated height adjustor and its air-conditioning with actiated charcoal and built-in fan. It is especiall designed to eet the ost exacting requireents of operators in ters of cofort, in all working situations. Low noise leel and ibrations To diinish fatigue at work and increase productiit, the acoustic power inside the operator s cab is lower than 72 db. The cab is ounted on iscoelastic riets to full absorb the excaator s ibrations. The rubber flanges also support the pipes and actiel participate in reducing external noise. Uncoproised isibilit The er large glazed surface area and inial area of uprights guarantee optial isibilit fro the operator s platfor, as well as a wide safet exit fro the rear window for the operator s safet and peace of ind. Ergonoic proportional anipulators The proportional anipulators are er finel tuned controls for the sensitie, accurate and fluid operation of hdraulic tools. This tpe of control is ideal for an R 96 used in a ariet of applications. LiMAM-Bild N 1779 Touchscreen displa 7-inch touchscreen with colour displa Wide range of adjustent, check, and onitoring possibilities Tough, reliable design (sealing tightness class IP 6) ideo capacit with high resolution, reproduces the iage fro the rear area onitor caera in best possible qualit Heightened isibilit Rear caera integrated in the counterweight as standard and caera for side area onitoring, for rear isibilit and heightened operating safet Optiized design of the whole uppercarriage proiding the operator with an iproed field of ision Retractable lainated glass roof panel Secure eergenc exit through the rear window New options Engine copartent lighting LED headlights with adjustable intensit 36 caera Follow e hoe (headlight cutoff dela) Windscreen wiper on botto part R 96 Litronic 11

12 Maintainabilit Siplified dail checks, longer aintenance interals 12 R 96 Litronic

Siplified dail checks The dail checks were taken into account fro the start of the design, to ake the sipler, ore accessible and shorter.

The autoatic centralised lubrication sste can sae precious interention tie, while guaranteeing that the excaator is in optiu operating condition.

Whether it is the interal for changing the hdraulic oil, which can be up to 8, hours, or the interal for changing the engine oil, eer 2, hours, eerthing has been taken into account to reduce the

13 Siplified dail checks The dail checks were taken into account fro the start of the design, to ake the sipler, ore accessible and shorter. The engine oil or diesel exhaust fluid leels, for exaple, can be checked ia the displa in the operator s cab. The autoatic centralised lubrication sste can sae precious interention tie, while guaranteeing that the excaator is in optiu operating condition. Longer serice interals The frequenc of the serice interals is optiised to guarantee that each part is operating optiall and that the aintenance operations are onl perfored as necessar. Whether it is the interal for changing the hdraulic oil, which can be up to 8, hours, or the interal for changing the engine oil, eer 2, hours, eerthing has been taken into account to reduce the frequenc of interentions and thus liit the achine s downtie and reduce costs. A aintenance-free exhaust gas treatent Thanks to its unique Liebherr design, the exhaust gas treatent is carried out in copliance with the Final Tier / Stage I standards, without fitting a particle filter. This results in an output with no loss of productiit linked to the regeneration of these filters and, of course, there is no aintenance tie or cost for spare parts associated with this technolog. Expert adice and serice proisions Liebherr offers an expert adice serice. Qualified personnel will help ou ake the appropriate decisions to eet our needs: sales arguents based on the terrain, serice agreeents, adantageous repair alternaties, original parts anageent, and reote data transfer for fleet anageent. LiDAT data transfer sste Coplete fleet anageent, all fro one source Optiized econoical perforance of the achine park thanks to detailed iew of the distribution of operating states and ties Reports on capacit coitent and the use of the achine park can be called up dail ia the Web portal Precise location of the achine Regional deliitation and fixed downties increase safet and reliabilit Hdraulic reseroir stop ale Eas and quick interruption of the oil circuit between hdraulic reseroir and hdraulic sste No drainage of fluid necessar for serice or repair work on the hdraulic sste Central lubrication sste The full-autoatic central lubrication sste, fitted as standard, allows for rapid aintenance: It saes tie-consuing indiidual lubricating and downtie All the lubrication points on the superstructure of the ehicle and the attachent hdraulics are supplied, with the exception of the connecting plate Engine oil leel isible on displa R 96 Litronic 13

Long lie progress with the R 96 Equipent Cast steel eleents Greater resistance to stresses Longer serice life Tools Z-tpe Liebherr teeth for fast replaceent Wide range

14 Long lie progress with the R 96 Equipent Cast steel eleents Greater resistance to stresses Longer serice life Tools Z-tpe Liebherr teeth for fast replaceent Wide range of work tools Special heat treatent for low wear and tear of drie sprockets A wide range of undercarriages suited to each application Robust construction 1 R 96 Litronic

Operator s cab Cofortable and ergonoic 7" high resolution color touchscreen for heightened readabilit Rear window with iproed isibilit Autoatic centralized lubrication standard Reduced aintenance tie

15 Operator s cab Cofortable and ergonoic 7" high resolution color touchscreen for heightened readabilit Rear window with iproed isibilit Autoatic centralized lubrication standard Reduced aintenance tie Longer serice life thanks to better lubrication isibilit Rear caera integrated in the counterweight Optiized design of the whole uppercarriage proiding the operator with a better field of ision Large glazed surface area with secure eergenc exit through the rear window R 96 Litronic 1

16 Technical Data Engine Rating per ISO 929 Torque Model Tpe Bore / Stroke Displaceent Engine operation Exhaust gas treatent Cooling sste Air cleaner Fuel tank Urea tank Electrical sste oltage Batteries Starter Alternator Engine idling Motor anageent Hdraulic Sste 22 kw (299 HP) at 1,8 RPM 1,97 N at 1, RPM Liebherr D936 A7 6 clinder in-line 122 / 1 2 l -stroke diesel Coon-Rail, onoturbo SCR with urea injection eission standard stage I / Tier f water-cooled and integrated otor oil cooler, aftercooled and fuel cooled dr-tpe air cleaner with pre-cleaner, priar and safet eleents 71 l 96 l 2 2 x 18 Ah / 12 2 / kw three-phase current 28 / 1 A sensor controlled connection to the integrated excaator sste controlling ia CAN-BUS to the econoical utilisation of the serice that is aailable Hdraulic sste Hdraulic pup for attachent and trael drie Max. flow Max. pressure for swing drie Max. flow Max. pressure Pup anageent Hdraulic tank Hdraulic sste Hdraulic oil filter Cooling sste MODE selection Hdraulic Controls The controlling is conducted ia the integrated excaator sste technolog, input and output odules, counicated ia the CAN-BUS with the electronic central unit Power distribution ia control ale with integrated safet ales Sero circuit Attachent and swing proportional ia jostick leers Trael with proportionall functioning foot pedals or adjusted with plugable leers speed pre-selection Additional functions proportional regulation ia foot pedals or rocker RPM adjustent Tool Control Swing speed Swing torque Holding brake R 96 Litronic Liebherr, ariable displaceent, swashplate double pup 2 x 3 l/in. 38 bar reersible, ariable flow, swashplate pup, closedloop circuit 2 l/in. bar electronic pup anageent ia the integrated sste controlling (CAN-BUS) snchronous to the control block 3 l ax. 9 l 1 full flow filter (1 μ) in return line with integrated fine filter area ( μ) copact cooler, consisting of a water cooler, sandwiched with hdraulic oil cooler, gearbox oil cooler, fuel cooler and after-cooler cores and hdrostaticall drien fan adjustent of engine and hdraulic perforance ia a ode pre-selector to atch application, e.g. for especiall econoical and enironentall friendl operation or for axiu digging perforance and hea-dut jobs stepless adjustent of engine output ia RPM at each selected ode 1 preadjustable pup flows and pressures for add-on tools Swing Drie Drie Transission Swing ring 16 Positie Control dual circuit hdraulic sste for independent and need-based quantit allotent ia the hdraulic pups; sensor-guided features high sste dnaics and sensitiit proided b inte grated sste controlling independent circuit for rotation Liebherr swashplate otor Liebherr copact planetar reduction gear Liebherr, sealed race ball bearing swing ring, internal teeth RPM stepless 11 kn wet ulti-disc (spring applied, pressure released)

17 Operator s Cab Cab Operator s seat Control sste Operation and displas Air-conditioning Noise eission ISO /1/EC ROPS safet cab structure with indiidual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a sliding window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddaping insulating, tinted lainated safet glass, separate window shades for the sunroof window and windscreen, cigarette lighter and 12 plug, s torage bins, lunchbox, cup holder Liebherr-Cofort seat, airsprung with autoatic weight adjustent, ertical and longitudinal seat daping including consoles and josticks. Seat and arrests adjust able separatel and in cobination, seat heating as standard ar consoles, swinging with the seat large high-resolution colour displa with selfexplana tor operation ia touchscreen, ideo, ersatile adjusting, control and onitoring facilities, e.g. cliate control, ipleent and tool paraeters standard autoatic air-conditioning full controlled on the displa, abient air function, fast de-icing and deisting at the press of a button, air ents can be operated ia a enu. Abient air and fresh air filters can be easil replaced and are accessible fro outside and standing on the ground. Heating-cooling unit, designed for extree outside teperatures, sensors for solar radiation, inside and outside teperatures ersions Drie Transission Trael speed Net drawbar pull on crawler Track coponents Track rollers / Carrier rollers Tracks Track pads Holding brake Brake ales Lashing ees Attachent Tpe L pa (inside cab) = 72 db(a) LWA (surround noise) = 16 db(a) Hdraulic clinders Bearings Lubrication Hdraulic connections Bucket gauge 2,39 gauge 2,9 gauge 2,39 (transport position) gauge 2,89 (work position) Liebherr swashplate otors with integrated brake ales on both sides Liebherr planetar reduction gears / : low range 3.2 k/h high range.9 k/h : low range 3. k/h high range.6 k/h / : 31 kn : 363 kn / : D7, aintenance-free : D7G, aintenance-free 9/2 sealed and greased triple grouser wet ulti-discs (spring applied, pressure released) integrated into trael otor integrated cobination of resistant steel plates and cast steels coponents Liebherr clinders with special seal-sste, shock protection sealed, low aintenance autoatic central lubrication sste (except link and tilt geoetr) pipes and hoses equipped with SAE splitflange connections standard equipped with Liebherr tooth sste R 96 Litronic 17

18 Diensions E D A 96 W C H K P Q L U R27 N S B G Z X E D A 96 C H W K P Q L U Z X 18 R 96 Litronic R271 N S B G

19 2,99 2,99 2,99 3,18 3,18 3,33 3,2 3,2 3,2 3,8 3,8 3,8 2,83 2,83 2,96 1,22 1,22 1,3,18,18, 1,7 1,7 1, ,39 2,9 2,39 / 2,89**,3,3, ,92 2,99 3,1 3,29 3,1 3,19 3,3 3,9 2,9*** / 3,** 2,99*** / 3,9** 3,1*** / 3,6** 2,99 2,99 3,2 3,2 3,19 3,19 3, 3, 3,2*** / 3,7** 3,2*** / 3,7** 3,2*** / 3,7** 6, 6, 6,2 * without door stop deice and spacer ** work position *** width with reoable steps A* C D E H K L P Q S U N B G Z - Stick Mono boo length 2.1 9, , 2.9 9, ,7.1 W 2.1 3, , , ,2.1 X , , , ,3.1 Straight ono boo 7, 6,8 6,,6 3, 3, 3,2 3,2 11,8 11,8 11,8 11,8 Two-piece boo 7. 7,6 7, 7,1 6,2 2,9 3, 3,1 3,2 12, 12, 12, 12, - Stick Mono boo length 2.1 1, 2.6 9, 2.9 9, ,8.1 W 2.1 3, , , ,3.1 X , , , ,3.1 Straight ono boo 7,1 6,9 6,6,7 3, 3,1 3,2 3,3 11,8 11,8 11,8 11,8 Two-piece boo 7. 7,7 7, 7,2 6,3 3, 3, 3,2 3,2 12, 12, 12, 12, - Stick Mono boo length 2.1 9, , 2.9 9, ,7.1 W 2.1 3, , , ,2.1 X , , , ,3.1 Straight ono boo 7, 6,8 6,,6 3, 3, 3,2 3,2 11,8 11,8 11,8 11,8 Two-piece boo 7. 7,6 7, 7,1 6,2 2,9 3, 3,1 3,2 12, 12, 12, 12, R 96 Litronic 19

20 Backhoe Bucket with Mono Boo and Counterweight t ft 3 12 R Digging Forces Digging force ISO 1 Digging Enelope Stick length Max. digging depth Max. reach at ground leel Max. duping height Max. teeth height 2 96 Breakout force ISO without quick coupler Digging force ISO -2 Breakout force ISO kn t kn t kn t kn t Max. breakout force ISO with ripper bucket and without quick coupler Operating Weight and Ground Pressure The operating weight includes the basic achine with counterweight t, ono boo, stick 2.6, quick coupler and bucket (1,2 kg) kn (3.6 t) ft Optional: counterweight t (counterweight t increases the operating weight b 1,3 kg and ground pressure b.3 kg/c2) see load tables on page 27 Pad width Weight kg 38,7 39,2 39,8 38,8 39,3 39,9 Ground pressure kg/c Pad width 6 7 Weight kg 3,7,3,6 Ground pressure kg/c Weight3) - Weight 2) Capacit ISO 71 Cutting width Buckets Machine stabilit per ISO 167* (7 % of tipping capacit) - Stick length () Stick length () Stick length () without quick coupler without quick coupler without quick coupler kg kg 1, 1. 1,22 1,1 1, ,28 1,2 1,3 1. 1,37 1,33 1, 1.7 1,6 1,2 1,6 2. 1,8 1, 1, ,69 1,6 1,8 2. 1,91 1,87 1, ,9 1,91 1,8 3. 1,99 1,9 * Indicated loads are based on ISO 167, at axiu reach, and a be swung 36 on fir and een ground 1) Standard bucket with teeth 2) Bucket for direct ounting 3) Bucket for ounting to quick coupler Other buckets aailable upon request 1) - Max. aterial weight = 2. t/3, = 1.8 t/3, = 1.6 t/3, = 1. t/3, = 1.2 t/3, = not authorised 2 R 96 Litronic

21 Lift Capacities with Mono Boo and Counterweight t Stick Stick * 1* 1* 1* 1* 1* 1* 1* * 1.9* 1.9* 1 1* 1* 1* 1* 1* 1.7* 13.* 13.* 13.1* 1.* 1.* 1.6* * * 1.7* 1.6* 12.7* 12.7* 12.* * * 1.6* 1.6* * * * * * * * * * * 1.6* * 1.3* 1.3* 1.2* * * Height * 13.* 1.* 21.6* 21.6* 21.2* 13.* 13.* 1.* 21.6* 21.6* 21.2* 1.7 1* 16.* * * * * 12.6* 1* 1* 16.* 19.7* 19.7* 1* 13.* 1* 1* 1* * 1* 1* 17.* 13.2* 13.2* 12.6* * * * 1.9* 1.9* 12.3* 12.3* 12.* * 1* 1* 1.2* * 13.* 13.* 13.2* 9.7* 9.7* * * 1.* 1.* * * 1.6* * * * 1.*..9. * * * *..8 * * * * * * * * * * * * * * * * * 8.* 8.* * 1.* * * * * * * * * * * 1.2* 1 1* 1* 1* 1.9* 1.9* 1.9* 1* 1* 1* 2.* 2.* 1 1* 1* 17.6* 1.2* 1.2* * * * * 12.* 13.* 13.* 1.8* 1.8* 1.9* * * 13.8* 1.3* Can be slewed though 36 8.* * * * 1.2* 1.2* 1.2* * * * 1.3* * * * * * * * * * 6.* * * * * * * 6.* * * * * * * * * * * * * * * In longitudinal position of undercarriage * 13.3* 1.1* 22.* 22.* 22.9* 18.* 18.* 1* 13.3* 13.3* 1.1* 22.* 22.* 22.9* 18.* 18.* 1* Stick 3.3. Stick Max. reach 22.7* 22.7* 1.* * * * * 13.* * 2.* * 2.* * 21.1* * 2.3* * 2.3* * 19.7* 1.* 1* 1* 1* 1 1 1* 19.7* 19.7* 2.* 2.* 2.* 2.2* 1* 1* 1* 1.* 1.* * 12.9* 12.9* 13.1* 1.* 1.* 1.* * * 1.2* 1.2* 1.* 11.* * * * * * * * * 9.7* 9.7* 1.6* 1.6* *.* * * 8. * 9.7* 7.6* *.3*.3*.3*.7.2*..8.*.3.7.7* * *.3*.3*.3*.2*.2*.2*.*.*.*.7* 7.* 7.* * * * * * * * * Liited b hdr. capacit The load alues are quoted in tons (t) at stick end (without bucket), and a be swung 36 on fir and een ground. Adjacent alues are alid for the undercarriage when in the l ongitudinal position. Capacities are alid for 6 wide track pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hdraulic c apacit (indicated ia *). Without bucket clinder, link and leer the lift capacities will increase b 62 kg. Lifting capacit of the excaator is liited b achine stabilit and hdraulic capacit. According to European Standard, EN 7-: In the European Union excaators hae to be equipped with an oerload warning deice, a load diagra and autoatic safet check ales on hoist clinders and stick clinder(s), when the are used for lifting operations which require the use of lifting accessories. R 96 Litronic 21

22 Backhoe Bucket with Straight Mono Boo and Counterweight t ft R Digging Forces 6 Digging force ISO Breakout force ISO 2 96 without quick coupler Digging force ISO Breakout force ISO Digging Enelope Stick length Max. digging depth Max. reach at ground leel Max. duping height Max. teeth height kn t kn t kn t kn t Max. breakout force ISO with ripper bucket and without quick coupler Operating Weight and Ground Pressure kn (3.6 t) ft Optional: counterweight t (counterweight t increases the operating weight b 1,3 kg and ground pressure b.3 kg/c2) see load tables on page 28 The operating weight includes the basic achine with counterweight t, straight ono boo, stick 2.6, quick coupler and bucket 1. 3 (1,33 kg). Pad width Weight kg 38,7 39,2 39,8 38,8 39,3 39,9 Ground pressure kg/c Pad width 6 7 Weight kg 3,7,3,6 Ground pressure kg/c Weight3) - Weight 2) Capacit ISO 71 Cutting width Buckets Machine stabilit per ISO 167* (7 % of tipping capacit) - Stick length () Stick length () Stick length () without quick coupler without quick coupler without quick coupler kg kg 1, 1. 1,22 1,1 1, ,28 1,2 1,3 1. 1,37 1,33 1, 1.7 1,6 1,2 1,6 2. 1,8 1, 1, ,69 1,6 1,8 2. 1,91 1,87 1, ,9 1,91 1,8 3. 1,99 1,9 * Indicated loads are based on ISO 167, at axiu reach, and a be swung 36 on fir and een ground 1) Standard bucket with teeth 2) Bucket for direct ounting 3) Bucket for ounting to quick coupler Other buckets aailable upon request 1) - Max. aterial weight = 2. t/3, = 1.8 t/3, = 1.6 t/3, = 1. t/3, = 1.2 t/3, = not authorised 22 R 96 Litronic

23 Lift Capacities with Straight Mono Boo and Counterweight t Stick Stick * 23.8* 23.8* * 1.6* * * 1.9* 1.9* 1 1* 1* 1* 1.6* 1* 1* 1.8* 12.* * * * * 12.3* 12.2* 12.1* 12.1* 12.1* 12.9* * 1* * * 13.* 13.* 13.3* * 1.9* 1.9* 1.9* * * * * * * *. 7. *.9. 1.*.8.2 *.7.2 * * * 8.* 7.6*..9 * * * * 8.* 7.6* * * * * * * * * * 8.* 8.* 8.* * * * * Height * * 9.* 1* 1* 16.* * * 9.* 1* 1* 16.* 1.* 1.* 1.3* * * * 1.* 1.* 1.3* 1* 1* 1* 1* 1* 1* 13.8* 13.8* 13.* * * * 12.3* 12.3* 12.* 1.8* 1.8* 1.8* * * 13.8* 13.8* * * * * * * * * * * * 7.* 9.7* * 9.* 8.* * * * * * * * * * 6.* 6.* 6.* * * * 7.6* 7.6* * * *.2*.2* *.*.*.*.1*.1*.1* * * * *.1..7*.8.3.2*.2* *.*.*.*.1*.1*.1*.*.*.*.1*.1*.1*.*.*.*.8*.8*.9*.7*.7*.7* Stick.1. Stick * * 1.2* 1.2* 1.2* * 13.* * 1.3* 1* 1* 1* 1* 1* 17.* 1.2* 1.2* 1.2* 12.* 12.* 13.* 1* 1* 1 1.6* 1.3* * * * * * 8.* * * * 1.6* 1.6* 13.1* 13.1* 13.2* 1.* 1.* 1.* * * 1.1* 1.* 12.2* 12.2* * * 8.* Can be slewed though 36 * * 1.* 1.* 1.* 1.3* 1.3* 1.3* 1.8* 1.8* 1.9* * * * * 9.7* * 3. *..7.3*.2.6.2*..3.3* *.*.* *.3*.3*.3*.2*.2*.2*.3*.3*.3*.8*.8*.9* 6.* 6.* * * * *.*.* In longitudinal position of undercarriage Max. reach 23.3* 23.3* * * 9.* 9.* 1.* 1.* 1 1 * * 9.* 9.* 1.* 1.* * * * * * 1.2* 18.* 18.* 1* 1* 1* * 1* 1* 1* 1* 1* 1* 13.* 13.* 13.* * * * * * * * * 12.* 12.* 12.1* 13.* 13.* 1.7* 1.7* 1.7* * * 13.2* 13.2* 13.* 1.* * * * * * * * * * * * 1.1* 1.1* 1.2* 1.9* 1.9* * * * * *.3.8 * * 6.* * * * * * * * * *.* 7.* * * * Liited b hdr. capacit The load alues are quoted in tons (t) at stick end (without bucket), and a be swung 36 on fir and een ground. Adjacent alues are alid for the undercarriage when in the l ongitudinal position. Capacities are alid for 6 wide track pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hdraulic c apacit (indicated ia *). Without bucket clinder, link and leer the lift capacities will increase b 62 kg. Lifting capacit of the excaator is liited b achine stabilit and hdraulic capacit. According to European Standard, EN 7-: In the European Union excaators hae to be equipped with an oerload warning deice, a load diagra and autoatic safet check ales on hoist clinders and stick clinder(s), when the are used for lifting operations which require the use of lifting accessories. R 96 Litronic 23

24 Backhoe Bucket with Two-Piece Boo 7. (Main Boo.3 ) and Counterweight t ft 12 R Digging Forces 8 Digging force ISO 6 Breakout force ISO Digging Enelope Stick length Max. digging depth Max. reach at ground leel Max. duping height Max. teeth height 2 96 without quick coupler Digging force ISO Breakout force ISO kn t kn t kn t kn t Max. breakout force ISO with ripper bucket and without quick coupler -2 3 kn (3.6 t) Operating Weight and Ground Pressure - The operating weight includes the basic achine with counterweight t, two-piece boo 7., stick 2.6, quick coupler and bucket (1,2 kg) ft Pad width Weight kg,9 1, 2, 1, 1, 2,1 Ground pressure kg/c Pad width 6 7 Weight kg,9 6, 7,8 Ground pressure kg/c Weight3) - Weight 2) Capacit ISO 71 Cutting width Buckets Machine stabilit per ISO 167* (7 % of tipping capacit) - Stick length () Stick length () Stick length () without quick coupler without quick coupler without quick coupler kg kg 1, 1. 1,22 1,1 1, ,28 1,2 1,3 1. 1,37 1,33 1, 1.7 1,6 1,2 1,6 2. 1,8 1, 1, ,69 1,6 1,8 2. 1,91 1,87 1, ,9 1,91 1,8 3. 1,99 1,9 * Indicated loads are based on ISO 167, at axiu reach, and a be swung 36 on fir and een ground 1) Standard bucket with teeth 2) Bucket for direct ounting 3) Bucket for ounting to quick coupler Other buckets aailable upon request 1) - Max. aterial weight = 2. t/3, = 1.8 t/3, = 1.6 t/3, = 1. t/3, = 1.2 t/3, = not authorised 2 R 96 Litronic

25 Lift Capacities with Two-Piece Boo 7. (Main Boo.3 ) and Counterweight t Stick Stick Height * 2.7* 2.7* 2.3* 21.8* 21.8* 21.* 1.3* 1.3* 1.* 2.3* 2.3* 2.3* 2 2* 2* 2.2* 2.2* 23.* 12.* 2.7* 2.7* 2.3* 21.8* 21.8* 21.* 1.3* 1.3* 1.* 2.3* 2.3* 2.3* 2* 2* 2* 2.2* 2.2* 23.* 1.3* 1.3* 1.* 1.* 1.* 1.8* * * * * 1.3* 1.3* 1.* 1.* 1.* 1.8* 1* 1* 1* 1* 1* 1* 1* 1* 1* 2.1* 2.1* 2.2* 2.* 2.* 2.* 2.7* 2.7* 2.6* 19.7* 19.7* 1* 1* 1* 1.7* * * 13.* 13.* 13.* 1.2* 1.2* 1.3* 1.8* 1.8* 1.8* 1.8* 1.8* 1.7* 1.7* 1.7* 1.7* 1.8* 1.8* 1.8* 1* 1* 1* 1.6* 1.6* 1.* * * 11.* 11.* 9.7* 9.7* * * * * 1.* 1.* 1.1* 8. 8.* * *.6.7*.6*.*.*.1*.8* 1.* 1.*. 1.1* * * 7. 8.* * * * * * * * * 1.2 * * * 1..9*.7*.7* 9..6*.*.*.1*.8* Can be slewed though 36 In longitudinal position of undercarriage. Max. reach 2* 2* * 22.9* 22.8* 1.7* 22.9* 22.9* 23.7* * 2* 2* * 22.9* 22.8* 1.7* 22.9* 22.9* 23.7* * 12.9* 12.9* 12.3* 12.3* 12.* 1 1 1* * * * 12.9* 12.9* 12.3* 12.3* 12.* 1* 1* 1* 1 1 1* 1* 1* 1* 1* 1* 2.* 2.3* 2.3* 2.* 2.6* 2.6* 2.6* 2.* 2.* 1* 1* 1* 1* * * 1.2* * 12.2* * * * * * 1.2* 12.2* 12.2* 12.2* 13.* 1.* 1.* 1.* 1.6* 1.6* 1.6* 1.7* 1.7* 1.7* 1.6* 1.6* 1.6* 1.7* 1.7* 1.7* 1.7* 1.7* 1.6* 1.6* 1.1* * * 1.1* 11.* 11.* 11.* 11.* 1.* 1.* 1.1* *.* * 9.* 9.* * * *.*.* 13.3* * * * * *.7.2 * *.* 3.7* 3.7* 3.8*.9*.9* * 13.3* * * * * * * * * * * 6.* 6.* 6.* * * * * * *.8*.8*.7*.7*.7*.* 3.7* 3.7* 3.8*.9*.9* * * Liited b hdr. capacit The load alues are quoted in tons (t) at stick end (without bucket), and a be swung 36 on fir and een ground. Adjacent alues are alid for the undercarriage when in the l ongitudinal position. Capacities are alid for 6 wide track pads with adjusting clinder in optial position. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit (indicated ia *). Without bucket clinder, link and leer the lift capacities will increase b 62 kg. Lifting capacit of the excaator is l iited b achine stabilit and hdraulic capacit. According to European Standard, EN 7-: In the European Union excaators hae to be equipped with an oerload warning deice, a load diagra and autoatic safet check ales on hoist clinders and stick clinder(s), when the are used for lifting operations which require the use of lifting accessories. R 96 Litronic 2

26 Lift Capacities with Two-Piece Boo 7. (Main Boo.3 ) and Counterweight t Stick Stick Height 1.8* 1.8* 2 2.* 2.* 23.7* 21.* 21.* 18.* 11.* 1.* 1.* 1.9* 21.* 21.* 22.1* 2.7 2* 2* * 2* 1* 1* 16.* 1.8* 1.8* 2 2.* 2.* 23.7* 21.* 21.* 18.* 11.* 1.* 1.* 1.9* 21.* 21.* 22.1* 2* 2* 2* 2* 2* 2* 1* 1* 16.* 1.1* 1.1* 1.1* 1.1* 1.3* 1.3* * * * * * * 1.* 1.* 1.* 1.* 1.2* 1.2* 1.1* 1.1* * 1.1* 1.1* * 1.2* 1.2* * * * * * 1.8 1* * 1 1* * 1* 1* * * * * * * * 9. 1.* * 1. 1.* * * * 1.8* * 1.8* 1 2.* * * 1.8* * * 1 2.1* * 13. 1* 1.9 1* 9.8 1* 1* 12.3* 12.3* * * * * Can be slewed though 36 * * 9.7* 9.7* * 1.8* 1.8* 1.9* 11.* 11.* 11.* 11.* 11.* 11.* 11.* 11.* 1.9* * * * * * * 9. 9.* 9.* 9.* * * 9.* * * * * * * * 6.* 6.* 3. 1.* 1.* * * *.8* * 3.* 3.* 3.*.3*.3*.* * * 1.8* 1.* 1.* * * *.8*.8*.8*.7*.7*.7*.6*.6*.* 3.* 3.* 3.*.3*.3*.* * * 1.8* In longitudinal position of undercarriage Max. reach. * * * * 2 2 2* 23.7* 23.7* 23.7* 1* 1* 1* 1* 1* 1* 2.2* 2.2* 2.6* 2* 2* * 2.* 2.* 23.7* 2 2 2* 23.7* 23.7* 23.7* 1* 1* 1* 1* 1* 1* 2.2* 2.2* 2.6* 2* 2* 2 2* 2* 2* 2.* 2.* 23.7* * * * * * 18.* 18.* 1* 1* 1* 19.7* 1 1 1* * 2.1* 2.1* 2.3* 2.3* 2.3* 1 1 1* 1.8* 1.8* * * * * * * * * 8.* * * 1.1* * * * * * * * * * 8.* * * 1.1* 13.8* 1.* 1.* 1.* 1.* 1.* 1.* 1.3* 1.3* 1.3* 1.* 1.* 1.* 1.7* 1.7* 1.7* 1.2* 1.2* 1.1* * * 8.* 8.* 8.* 8.* * * 8.* 8.* 8.* 8.* 8.* * * * * *.9* *.7*.*.9* * * * * * * * * * * * * * *.7*.7*.* * * 6.* 6.* 6.* 6.* * *.*.*.*.*.3*.3*.2* 3.9.1*.1* * * * * * 3.* 3.* 3.* 3.* 3.* 3.*.*.*.2* 6.* 6.* * *.*.*.*.*.3*.3*.2*.1*.1*.1*.1*.1*.1*.2*.2*.2*.3*.3*.3*.6*.6*.6*.6*.6*.* 3.* 3.* 3.* 3.* 3.* 3.*.*.*.2* * Liited b hdr. capacit The load alues are quoted in tons (t) at stick end (without bucket), and a be swung 36 on fir and een ground. Adjacent alues are alid for the undercarriage when in the l ongitudinal position. Capacities are alid for 6 wide track pads with adjusting clinder in optial position. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hdraulic capacit (indicated ia *). Without bucket clinder, link and leer the lift capacities will increase b 62 kg. Lifting capacit of the excaator is l iited b achine stabilit and hdraulic capacit. According to European Standard, EN 7-: In the European Union excaators hae to be equipped with an oerload warning deice, a load diagra and autoatic safet check ales on hoist clinders and stick clinder(s), when the are used for lifting operations which require the use of lifting accessories. 26 R 96 Litronic

27 Lift Capacities with Mono Boo and Counterweight t Stick Stick , 17,* 16,9 17,* 17,8* 17,8* 13,7* 18,* 18,* 18,1* 13,7* 18,* 18,* 18,1* 13,7 1,9* 16,2* 13,8 1,2 18,* 1,1 1, 1,7* 11,1* 11,1* 1,9* 1,9* 16,2* 18,6* 18,6* 18,* 16,* 16,* 1,7* 11,1* 11,1* 11,1* 11,1* 11,1* 11,6* 11,6* 11,7* 13,* 13,* 13,1* 1,* 1,* 1,6* 1,* 1,* 1,* 1,* 1,* 1,* 1,7* 1,7* 1,6* 12,7* 12,7* 12,* 7,8 8, 1,3 7,6 8,2 1, 7,3 7,9 9,7 7, 7,6 9, 6,9 7, 9,3 6,9 7, 9, 9, 9,* 9,* 7, 8, 9,* 6, 7, 8, 6, 6, 8,,8 6,3 7,9 6, 6, 8,1 6, 7,1 9, 7,8 8, 1,2* 8,8* 8,8* 1,6* 1,6* 1,7* 11,* 11,* 11,1* 11,7* 11,7* 11,7* 11,9 11,9 12,2* 11,7 11,7 12,2* 11,* 11,* 11,3* 9,* 9,* 9,* 9,* 9,* 9,* 8,9* 8,9* 9,* 9,2* 9,2* 9,2* 9,7 9,7 9,9* 1, 1,1 1,6* 1,6* 1,6* 1,6* 1,3* 1,3* 1,2* 8,8* 8,8* 6,7 7,7 8, Height. 3. 8,6 1. 8, 7,9 1. 6,9 3.,. 13,* 13,* 1,* 21,6* 21,6* 21,2* 13,* 13,* 1,* 21,6* 21,6* 21,2* 16, 16,* 16,* 1, 1,8 18,2* 12,8* 12,8* 13,* 13, 1,9 18,7* 13,6 1, 19,2 13,8 1,2 17,* 13,2* 13,2* 12,6* 16,* 16,* 16,* 19,7* 19,7* 18,2* 12,8* 12,8* 13,* 17,9* 17,9* 18,7* 19,* 19,* 19,* 17,2* 17,2* 17,* 13,2* 13,2* 12,6* 1,9* 1,9* 11,* 1,6 11, 12,* 9,9 1,8 13,3 9, 1,2 12,8 9,1 9,9 12, 9, 9,9 12, 9,2 1, 12,7 9,6 9,7* 9,* 1,9* 1,9* 11,* 12,3* 12,3* 12,* 13,9* 13,9* 1,* 1,1* 1,1* 1,2* 1,* 1,* 1,* 1,* 1,* 1,9* 13,* 13,* 13,2* 9,7* 9,7* 9,* 7,9 8, 1,* 7,6 8,2 1,1 7,3 7,9 9,8 7, 7,6 9, 6,8 7, 9,3 6,8 7, 9,3 7, 7,6 1,* 1,* 1,* 1,* 1,* 1,6* 11,3* 11,3* 11,3* 11,9 11,9 12,* 11,7 11,7 12,2* 11,6 11,6 11,7* 1,* 1,*,6 6,1 7,,,9 7, 8,3* 7,* 7,* 7,* 6,8 7,1* 7,1*,9 6, 7,1*, 6, 7,3*,,8 7,3, 6, 7, 6, 6, 8,2 6,9 7, 9,6 9,1* 9,1* 9,* 8,8* 8,8* 9,1* 9,1 9,2 9,9* 8,3* 7,* 7,* 7,* 7,1* 7,1* 7,1* 7,1* 7,1* 7,1* 7,2* 7,2* 7,3* 7,7* 7,7* 7,7* 8,* 8,* 8,6* 9,9* 9,9* 1,* 9,9* 9,9* 9,9* 9,1* 9,1* 9,* 3. 1,2* 1,2* 1,* 1,7 16,1 19,2* 13,7 1,1 1,9* 13, 1,9 19, 13, 1,9 19,1 13,7 1,1 17,6* 1,1 1,2* 13,7* 1,2* 1,2* 1,* 18,9* 18,9* 19,2* 1,9* 1,9* 1,9* 18,7* 18,7* 19,3* 2,* 2,* 19,8* 17,9* 17,9* 17,6* 1,2* 1,2* 13,7* 1,* 1,6 11, 12,* 9,9 1,8 13, 9, 1,2 12,8 9,1 9,9 12, 9, 9,8 12, 9,1 9,9 12, 9, 1,3 1,3* 1,* 11,8* 11,8* 12,* 13,* 13,* 13,6* 1,8* 1,8* 1,9* 1,* 1,* 1,* 1,1* 1,1* 1,* 13,8* 13,8* 13,6* 1,7* 1,7* 1,3* Can be slewed though 36 7,7* 7,7* 8,* 7,9 8, 9,6* 7,6 8,2 1,1 7,3 7,9 9,8 7, 7,6 9, 6,8 7, 9,2 6,7 7,3 9,2 6,8 7, 9,3 7,7* 7,7* 8,* 9,* 9,* 9,6* 1,2* 1,2* 1,2* 11,* 11,* 11,* 11,7* 11,7* 11,8* 11,6 11,6 12,1* 11, 11,6 11,8* 1,* 1,* 1,3*,7 6,2 7,6,6 6, 7,,,9 7,3,3,8 7,3 7,3* 7,3* 7,7* 9,2 9,3 9,6* 9,1 9,1 9,9* 9, 9, 9,8* 7,2* 7,2* 7,1* 6,* 6,* 6,* 6,2* 6,2* 6,2*,6 6,1 6,1*,2,7 6,3*,1, 6,7*,2,6 7,1,6 6,1 7,7 6, 7, 8,9 8, 9,1* 9,* 7,2* 7,2* 7,1* 6,* 6,* 6,* 6,2* 6,2* 6,2* 6,1* 6,1* 6,1* 6,3* 6,3* 6,3* 6,6* 6,6* 6,7* 7,3* 7,3* 7,* 8,* 8,* 8,6* 9,6* 9,6* 9,6* 9,1* 9,1* 9,* In longitudinal position of undercarriage 6,2. 7,3 8,2 8,8 9,1 9,1 8,9 8, 7, 6,2 13,3* 13,3* 1,1* 22,* 22,* 22,9* 18,* 18,* 17,3* 13,3* 13,3* 1,1* 22,* 22,* 22,9* 18,* 18,* 17,3* Stick ,6 Stick ,1* 11,1* 11,1* 11, 11,6* 11,7* 1, 11,3 13,1* 9,8 1,6 13,2 9,3 1,2 12,8 9,1 1, 12,6 9,1 1, 12,6 9, 1,2 12,*. 7,6 8, 9,1. 9, 3. 9, 1. 9,2 8,7 1. 7,9 3. 6,6. Max. reach 22,7* 22,7* 1,* 1, 16, 18,1* 13,9 1,3 19,3* 13, 1,8 6,* 6,* 19, 12,8* 12,8* 13,3 12,8* 12,8* 1,7 13,* 13,* 18,9 2,* 2,* 13, 2,* 2,* 1,9 21,1* 21,1* 18,* 2,3* 2,3* 13,9 2,3* 2,3* 1,3 19,7* 19,7* 1,* 1,* 17,8* 17,8* 18,1* 19,8* 19,8* 19,3* 19,7* 19,7* 2,* 2,* 2,* 2,2* 18,6* 18,6* 18,* 1,* 1,* 1,* 1,8 11,2* 11,3* 1, 1,9 13,1* 9, 1,3 12,9 9, 9,9 12, 8,9 9,7 12,3 8,9 9,8 12, 9,2 1, 11,* 11,2* 11,2* 11,3* 12,9* 12,9* 13,1* 1,* 1,* 1,* 1,2* 1,2* 1,2* 1,2* 1,2* 1,1* 1,2* 1,2* 1,* 11,7* 11,7* 11,* 8,1 8,7 8,8* 8, 8,6 9,1* 7,7 8,3 9,8* 7,3 7,9 9,8 7, 7,6 9, 6,7 7,3 9,2 6,6 7,2 9,1 6,7 7,3 9,2 8,7* 8,7* 8,8* 9,* 9,* 9,1* 9,7* 9,7* 9,8* 1,6* 1,6* 1,7* 11,* 11,* 11,* 11,6 11,6 11,9* 11, 11, 11,8* 11,* 11,* 1,8*,*,7 6,2 7,7,6 6, 7,,,9 7,3,3,7 7,2,2,7 7,2,* 8,9* 8,9* 8,9* 9,3 9,3 9,3* 9,1 9,1 9,7* 8,9 8,9 9,8* 8,* 8,* 7,6* 6,1* 6,1* 6,*,*,*,*,3*,3*,3*,2*,2*,2*,9,3,*,8,2,7*,9,3 6,2*,2,6 7,1*,9 6, 8,2 7, 8,1 8,9* 6,1* 6,1* 6,*,*,*,*,3*,3*,3*,2*,2*,2*,*,*,*,6*,6*,7* 6,2* 6,2* 6,2* 7,* 7,* 7,1* 8,6* 8,6* 8,8* 9,* 9,* 8,9* 6,8 8,1 8,9 9, 9,7 9,8 9,6 9,1 8,3 7,1 * Liited b hdr. capacit The load alues are quoted in tons (t) at stick end (without bucket), and a be swung 36 on fir and een ground. Adjacent alues are alid for the undercarriage when in the l ongitudinal position. Capacities are alid for 6 wide track pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hdraulic c apacit (indicated ia *). Without bucket clinder, link and leer the lift capacities will increase b 62 kg. Lifting capacit of the excaator is liited b achine stabilit and hdraulic capacit. According to European Standard, EN 7-: In the European Union excaators hae to be equipped with an oerload warning deice, a load diagra and autoatic safet check ales on hoist clinders and stick clinder(s), when the are used for lifting operations which require the use of lifting accessories. R 96 Litronic 27

28 Lift Capacities with Straight Mono Boo and Counterweight t Stick Stick * 1.9* 23.8* 23.8* * 1.6* * 12.* 1.9* 1.9* 1 1* 1* 1* 1.6* 1* 1* 1.8* 12.* * * 12.1* * * 12.3* 12.2* 12.1* 12.1* 12.1* 12.9* * 1* 1.* 1.* 1.* 1.9* 1.9* 1.8* 13.* 13.* 13.3* * 1.9* 1.9* 1.9* 11.* 11.* 12.* * * * * * 7.6 * *..8 *.3.7 * * * 8.* 7.6* *.3.8 * * * * 8.* 7.6* * * * * * * * * * * * 8.* 8.* 8.* * * * * Height * * 9.* 1* 1* 16.* * * 9.* 1* 1* 16.* 1.* 1.* 1.3* * * * 13.* 1.* 1.* 1.3* 1* 1* 1* 1* 1* 1* 13.8* 13.8* 13.* * * * 12.3* 12.3* 12.* 1.8* 1.8* 1.8* 1.3* 1.3* 1.3* 1.9* 13.8* 13.8* * * * * * * * * 1.9* 1.8* * * * * 7.* 9.7* * 9.* * * 8.* * * * * * * * * * * * 6.* 6.* 6.* * * * 7.6* 7.6* * * *.2*.2* *.*.*.*.1*.1*.1* 3.9.*.* 3.9.1*.1* *.1..9*.6..7*..7*.2*.2* *.*.*.*.1*.1*.1*.*.*.*.1*.1*.1*.*.*.*.8*.8*.9*.7*.7*.7* Stick.1. Stick * 1* * 1.2* 1.2* 1.2* 12.* 12.* 13.* * 1.3* 1* 1* 1* 1* 1* 17.* 1.2* 1.2* 1.2* 12.* 12.* 13.* 1* 1* 1 1.6* 1.3* * * * 1.6* 1.6* * * * 8.* * * * 1.6* 1.6* 13.1* 13.1* 13.2* 1.* 1.* 1.* 1.2* 1.2* 1.2* 1* 1* 1.1* 1.1* 1.* 12.2* 12.2* * * 8.* Can be slewed though 36 * 8. 1.* * 1.* 1.* 1.* 1.3* 1.3* 1.3* 1.8* 1.8* 1.9* * * * * * * 9.7* * * * 3. *.2.3*.3*.7.2*..8.3* *.8.2 *..8 *.*.* *.3*.3*.3*.2*.2*.2*.3*.3*.3*.8*.8*.9* 6.* 6.* * * * *.*.* In longitudinal position of undercarriage Max. reach 23.3* 23.3* * * 9.* 9.* 1.* 1.* 1 1 * * 9.* 9.* 1.* 1.* * * * * * 13.* 1.2* 18.* 18.* 1* 1* 1* * 1* 1* 1* 1* 1* 1* 13.* 13.* 13.* * * * * * * * * 12.* 12.* 12.1* 13.* 13.* 1.7* 1.7* 1.7* 1* 1* 1* 1.6* 1.6* 1.* 13.2* 13.2* 13.* 1.* * * * 8. * * * * * * * * * 1.1* 1.1* 1.2* 1.9* 1.9* * 1.* 1.* 1.2* * * *.9 6. * * 6.* * * * * * * * * * 8.* 8.* * *.* * * 7.* * * * * * Liited b hdr. capacit The load alues are quoted in tons (t) at stick end (without bucket), and a be swung 36 on fir and een ground. Adjacent alues are alid for the undercarriage when in the l ongitudinal position. Capacities are alid for 6 wide track pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hdraulic c apacit (indicated ia *). Without bucket clinder, link and leer the lift capacities will increase b 62 kg. Lifting capacit of the excaator is liited b achine stabilit and hdraulic capacit. According to European Standard, EN 7-: In the European Union excaators hae to be equipped with an oerload warning deice, a load diagra and autoatic safet check ales on hoist clinders and stick clinder(s), when the are used for lifting operations which require the use of lifting accessories. 28 R 96 Litronic

29 Aailable Buckets 3 kg Mono boo 1, 1. 1, ,38 1,3 1. 1,7 1, 1.7 1,6 1,6 2. 1,7 1, ,82 1,8 2. 2,9 1, ,13 1,8 3. 2,17 Weight3) - Weight 2) Capacit ISO 71 Cutting width Buckets Machine stabilit per ISO 167* (7 % of tipping capacit) kg 1,23 1,3 1,3 1,2 1,66 1,78 2, 2,9 2, Stick length () Stick length () Stick length () without quick coupler without quick coupler without quick coupler ) Straight ono boo 1, 1. 1,23 1, ,38 1,3 1,3 1. 1,7 1,3 1, 1.7 1,6 1,2 1,6 2. 1,7 1,66 1, ,82 1,78 1,8 2. 2,9 2, 1, ,13 2,9 1,8 3. 2,17 2,13 Two-piece boo 7. 1, 1. 1,23 1, ,38 1,3 1,3 1. 1,7 1,3 1, 1.7 1,6 1,2 1,6 2. 1,7 1,66 1, ,82 1,78 1,8 2. 2,9 2, 1, ,13 2,9 1,8 3. 2,17 2,13 * Indicated loads are based on ISO 167, at axiu reach, and a be swung 36 on fir and een ground 1) bucket with teeth 2) Bucket for direct ounting 3) Bucket for ounting to quick coupler Other buckets aailable upon request Max. aterial weight = 2. t/3, = 1.8 t/3, = 1.6 t/3, = 1. t/3, = 1.2 t/3, = not authorised R 96 Litronic 29

30 Aailable Standard Buckets Sticks 2.1 / 2.6 / 2.9 / 3.3 /.1 Mounting Execution Width () 1, 1,2 1,3 1, 1,6 1,6 1,8 1,8 1,8 1, 1,2 1,3 1, 1,6 1,6 1,8 1,8 1,8 Capacit (3) Teeth Nuber of teeth Weight (kg) 1,22 1,28 1,37 1,6 1,8 1,69 1,91 1,9 1,99 1,1 1,2 1,33 1,2 1, 1,6 1,87 1,91 1,9 Teeth Nuber of teeth Weight (kg) 1,38 1,7 1,6 1,7 1,82 2,9 2,13 2,17 1,23 1,3 1,3 1,2 1,66 1,78 2, 2,9 2,13 Aailable Buckets Sticks 2.1 / 2.6 / 2.9 / 3.3 /.1 Mounting 3 R 96 Litronic Execution Width () 1, 1,2 1,3 1, 1,6 1,6 1,8 1,8 1,8 1, 1,2 1,3 1, 1,6 1,6 1,8 1,8 1,8 Capacit (3)

31 Standard Equipent Chain guide 1 piece Lashing eelets Sprocket with dirt ejector Track rollers, lifetie-lubricated Tracks, sealed and greased Uppercarriage Engine hood with gas spring opening Handrails Liebherr full-autoatic central lubrication sste (except connecting link for bucket kineatics) Non slip surfaces Sound insulation Swing brake lock, aintenance-free Hdraulic Sste Filter with integrated fine filter area Liebherr hdraulic oil Pressure storage for controlled lowering of equipent with engine turned off Pressure test ports for hdraulic Shut-off ale between hdraulic tank and pups Work ode selector Engine Coon-Rail injection sste Confor with stage I / Tier f eission standard Engine idling, autoatic, sensor-controlled Fuel filter and water separator Intercooler Turbo charger Operator s Cab 7" colour ultifunction displa with touchscreen Air conditioning, autoatic Cigarette lighter and ashtra Coat hook Copletel retractable windscreen Cup holder Fuel consuption indicator on touchscreen Headlights on cab, front, halogen, 2 pieces Hdraulic suspension Interior light LiDAT Plus (Liebherr data transfer sste) * Mechanical hour eters, readable fro outside the cab Operator seat Cofort with longitudinal and ertical daping Preparation for radio installation Rain hood oer front window opening Rear iew onitoring caera Rear window eergenc exit Roll-down sun blinds (front and roof windows) Roof window, right window and windshield with lainated safet glass ROPS safet cab structure (ISO ) Rubber floor at Seat belt Sliding windows in cab door Storage bin Storage space Tinted windows Windscreen, totall or partiall retractable Wiper / washer Attachent Headlight on boo, right, halogen, 1 piece Safet check ales for hoist clinders Non-exhaustie list, please contact us for further inforation. * optionall extendable after one ear R 96 Litronic 31

32 Options Uppercarriage Botto and lateral protection for uppercarriage Counterweight t Electric socket for urea filling station (2 ) Engine copartent lighting Fuel anti-theft deice Lockable tool box Reersible fan drie Skiew 36 caera Special painting Tank refilling pup fuel Wiggins diesel fuel Hdraulic Sste Operator s Cab Acoustic trael alar deactiatable Additional headlights cab, front and / or rear, halogen or LED, 2 pieces Adjustable intensit headlights (LED) Aber beacon on cabin Auxiliar heater (prograable) Botto windscreen wiper Caera for side area onitoring Cool box (12 ) Electronic iobilizer Eergenc stop button in cab Falling objects protection structure FOPS Fire extinguisher Follow e hoe headlights Footrest Front guard protection structure FGPS Headlights on cab, front, LED, 2 pieces Ipact-resistant 1 piece windscreen Ipact-resistant 2 pieces windscreen Ipact-resistant roof window Liebherr proportional control (ini-josticks 2 axis) Operator seat Cofort with -points seat belt Operator seat Preiu with integrated entilation Radio Cofort Retractable seat belt 76, orange color Roof window wiper Seat belt indicator Sun isor Bpass filter for hdraulic oil Liebherr hdraulic oil, adapted for extree cliate conditions Liebherr hdraulic oil, biodegradable Attachent Engine Air pre-filter with dust trap Autoatic engine shut-down after idling Diesel particulate filter Pre-heating sste for fuel Additional headlight on boo, left, halogen or xenon, 1 piece Botto protection for boo or stick Headlight on boo, right, xenon, 1 piece High pressure circuit Liebherr autoatic lubrication sste for connecting link Liebherr bucket range Liebherr quick coupler, hdraulic or echanical Liebherr tooth sste LIKUFIX, quick coupling sste for hdraulic tools Mediu pressure circuit Oerload warning deice Protection for piston rod, adjusting clinder Protection for piston rod, bucket clinder Safet check ales for stick clinder Securit for hoist clinders Stick clinder shut-down, adjustable Tool Control, 1 tool adjustents selectable oer the displa Non-exhaustie list, please contact us for further inforation. Options and / or special attachents, supplied b endors other than Liebherr, are onl to be installed with the knowledge and approal of Liebherr in order to retain warrant. Liebherr-France SAS 2 aenue Joseph Re, B.P. 9287, FR-68 Colar Cedex S , Fax info.lfr@liebherr.co Printed in Geran b Eberl RG-BK LFR/SP _enGB All illustrations and data a differ fro standard equipent. Subject to change without notice. All indicated loads are based in accordance with ISO 928. Chain guide 3 pieces Chain guide pieces Chain guide full length Lockable tool box Reinforced base panel for centre section Reinforced coer and base plate for undercarriage centre section

Crawler Excavator R 944 C. Operating Weight: 38,500 40,900 kg Engine Output: 190 kw / 258 HP Stufe IIIA / Tier 3 Bucket Capacity:

Crawler Excavator R 944 C. Operating Weight: 38,500 40,900 kg Engine Output: 190 kw / 258 HP Stufe IIIA / Tier 3 Bucket Capacity: Crawler Excaator R 944 C Operating Weight: 38,500 40,900 kg Engine Output: 190 kw / 258 HP Stufe IIIA / Tier 3 Bucket Capacit: 1.75 2.50 ³ R 944 C Litronic Operating Weight: 38,500 40,900 kg Engine Output: