PARTS MANUAL. Version 2.7 XR SERIES. R.P.S. Corporation Phone: P.O. Box 368 Fax: Racine, Wisconsin 53401

Transcription

1 Version 2.7 PARTS MANUAL XR SERIES R.P.S. Corporation Phone: P.O. Box 36 Fax: Racine, Wisconsin 53401

2

3 Soap Choices... 4 Front Wheel Drive... 6 Side Brooms... Front Wheel and Side Brooms Disk Decks... Shrouds Cylindrical Wiper Cylindrical Decks Cylindrical Door... 1 Attaching Decks Squeegee Trail Arm Inch Squeegee Inch Squeegee Inch Squeegee... 2 Squeegee Trail Arm and Rear Axle Dual Vac Motors Vac Motors and Solution Hoses Tank Lid Tank Baffle... 3 Solution/Recovery Tank Tank Mounting Standard Batteries and Seat Industrial Battery and Seat Central Command... 4 Steering Tower Central Command and Steering Tower Side Doors Side Doors Overhead Guard Water Jet Kit... 5 Vac Wand Kit SUDS System SUDS System Industrial Battery TABLE OF CONTENTS TOC

4 4 Soap Choices Industrial Commercial Environmentally Safe TRADITIONAL DRUMS / TOTES DEMO / RENTAL QUARTS WALL-MOUNTED SUPERCON ONBOARD AUTO DISPENSING 4

5 Soap Choices 5 Onboard Availability SUDS Approved SUDS Approved SUDS Approved FORMULAS 707 Citrus Green 733 Low ph 755 High Power An environmentally cleaner that works! It is a solvent free degreaser that works on oil, carbon, even rubber marks. Incorporates the latest technology in Green Cleaning. Safe on most surfaces not harmed by water alone. Low scale formula to prevent alkali buildup in cleaning equipment, while offer detergent to emulsify oil. Ideal solvent fortified degreaser. This butyl based detergent is penetrating, fast acting, and deep cleaning with built-in corrosion inhibitors. It is our most effective degreaser. SUDS Approved 757 Gloss A high gloss detergent designed to dry to a bright shine. It is ideal for use on finished surfaces, tile, epoxy, or enamel. The special formula removes salt residue, scuff marks and dirt, while leaving no residue behind. The result is a clean, non-slip surface, ready for immediate use. SUDS Approved 797 HD The Heavy Duty concentrate is a Super alkaline detergent, formulated for heavy soil, grease, and thick buildup. Popular in machine shops, auto and truck repair, and other facilities with oil, hydraulic fluids and cutting oils. **Below Sold in bulk concentrate only. Not available as a SuperCon, PowerDose or SUDS product. 727 Pretreat** 744 Tough Stuff** Designed to quickly remove tire marks, oil stains and buildup that has accumulated. This pretreat uses the powerful cleaning of natural citrus extract and is intended to be used directly on the floor at 100% concentrate. Ideal for applications with Hard Water problems. It is safe to use in pressure washers and automatic scrubbers. The formulation enhances soil suspension, digests oil and grease, while supporting extra water conditioner. Distributed by: PowerCat P.O. Box 503 Racine, WI Phone: Fax: PowerCat, LLC,

6 6 6 Front Wheel Drive

7 Front Wheel Drive 7 7

8 Side Brooms FOR MACHINES BUILT PRIOR TO SERIAL #5000 USE PART # FOR MACHINES BUILT PRIOR TO SERIAL #5000 USE PART #

9 Side Brooms 9 Item Part No. Part Description Qty (RH) SIDE BROOM MOTOR, 36V 106 RPM (44:1) (LH) SIDE BROOM MOTOR, 36V 106 RPM (44:1) SIDE BROOM LIFT ARM (LH) SIDE BROOM LIFT ARM (RH) " SIDE BROOM POLYPROPYLENE SIDE BROOM PIVIOT SIDE BROOM AXLE SHAFT SIDE BROOM MTG PLATE GROMMET-3/ ID X 1-1/2 OD X H /4" X 1 1/2" CLEVIS PIN 2 11 H HCS 5/16"- 1 X 1-1/2" 2 H-7061 NYLOK 5/16" - 1 SS 13 H-7113 HCS 5/16"- 1 X 2-1/2" FULL THREAD SS 2 14 H FHP 1/4"- 20 X 1/2" SS 15 H CB 5/16"- 1 X 1-3/4" SS 2 16 H CB 5/16"- 1 X 1-1/2" SS 2 H-RUE RUE RING COTTER 2 9

10 10 Front Wheel and Side Brooms 10

11 Front Wheel and Side Brooms 11 11

12 Disk Decks (RH) 34 INCH SHROUD FOR INDIVIDUAL PARTS SEE SHROUD PAGE FOR COMPLETE ASSEMBLY USE PART #

13 Disk Decks Item Part No. Part Description Qty BRUSH DRIVER SHROUD ADJUSTMENT KNOB DISK SCRUB DECK BRACKET SCRUB ARM BRACKET " STROKE 36V ACTUATOR 1000 LB LOAD /" ID, 1/2" OD, 1/4" LG BEARING /" ID, 1/2" OD, 3/" LG, FLANGE BEARING BRONZE THRUST BEARING,.50" ID X 1.0" OD X 1/16" TH STAR KNOB, 3/-24 THREAD ROD END, 3/-24 LEFT HAND THREAD ROD END, 3/-24 RIGHT HAND THREAD FRONT DISK DECK CURTAIN REAR DISK DECK CURTAIN SLEEVE BEARING DISK SCRUB DECK ACTUATOR ADJUSTMENT BRACKET ADJUSTABLE LATERAL ARM BODY LATERAL ARM (DISK) MOTOR 36V 1.0 HP X 200 RPM /2 " PLASTIC BARB TEE /2 NPT X 1/2" BARB ELBOW 2 22 H JNYL 3/- 24 SS 4 23 H HCS 3/"- 24 X 4.5" FULL THREAD SS 1 24 H / ID X 5/ OD SHIM 4 25 H /" X 5" CLEVIS PIN 2 26 H /2" NPT LOCKNUT 4 27 H LH HX JAM SS 2 2 H HCS 5/16"- 1 X 1" SS 2 29 H HCS 3/"-16 X 3/4" SS 30 H HCS 3/"- 16 X 1-1/2" SS 4 31 H HCS 3/"- 16 X 1-3/4" SS 4 32 H-707 HN 3/"-16 SS 6 33 H-7032 HX JAM SS 2 34 H-7061 NYLOK 5/16" - 1 SS 4 35 H-7062 NYLOK 3/"-16 SS 36 H FW 1/4" X 5/" SS 5 37 H FW 5/16" X 3/4" SAE SS 6 3 H-710 FW 3/" X 7/" SS 1 39 H LW 3/" SS H HCS 3/"- 24 X 2" SS FULL THREADED 4 41 H BHSCS 1/4-20 X 5/" SS 4 42 H BHSCS 1/4-20 X 3/4" SS 1 43 H CB 5/16"- 1 X 3/4" SS 4 44 H SPRING, 4-1/" LG X 9/16" OD (42E) 4 45 H-9025 FW 3/" GRADE 4 46 H FW 3/" SS 2 47 H-NJ04C JNYL 1/4" - 20 SS 5 4 H-RUE14 3/" RUE RING COTTER 2 49 T-050R1400 1/2" ID X 14" LG WIRE REINF. CLEAR TUBE

14 14 Shrouds ONLY USED ON 40" DECKS " LEFT HAND SHROUD SHOWN PART # " RIGHT HAND SHROUD USE PART # " LEFT HAND SHROUD USE PART # " RIGHT HAND SHROUD USE PART # LINATEX SHROUD WIPER G GUM RUBBER SHROUD WIPER 3 TO ORDER COMPLETE (RH) 34" SHROUD ASSEMBLY USE PART # C FOR 40" (RH) SHROUD ASSEMBLY USE PART # C TO ORDER COMPLETE (LH) 34" SHROUD ASSEMBLY USE PART # C FOR 40" (LH) SHROUD ASSEMBLY USE PART # C Item Part No. Part Description Qty " WHEEL (GRAY) " SHROUD CURTAIN SHROUD CURTAIN BAND (34" & 40") RECESSED HANDLE 1 5 H-7062 NYLOK 3/"-16 SS 2 6 H FW 1/4" X 5/" SS 7 7 H BHSCS 1/4-20 X 5/" SS 2 H CB 1/4"- 20 X.75" SS 7 9 H CB 3/"- 16 X 2.0" SS 2 10 H-NJ04C JNYL 1/4" - 20 SS 9 14

15 Cylindrical Wiper 15 LH WIPER HORIZONTAL ARM USE PART # RH WIPER HORIZONTAL ARM USE PART # L LINATEX SIDE WIPER G GUM RUBBER SIDE WIPER Item Part Number Part Description Qty /" ID, 1/2" OD, 1/4" LG BEARING SHROUD VERTICAL ARM INNER CYLINDRICAL WIPER BAND OUTER CYLINDRICAL WIPER BAND " LANYARD 1 6 H HCS 5/16"- 1 X 1-1/2" 2 7 H HN 5/16"- 1 SS 2 H FW 5/16" X 3/4" SAE SS 2 9 H-710 FW 3/" X 7/" SS 2 10 H FHP 1/4"- 20 X 1" SS 2 11 H-7390 FHSCS 5/16"- 1 X 1" SS 2 H CB 1/4"- 20 X.75" SS 6 13 H CB 1/4"- 20 X 1.0" SS 2 14 H CB 3/"- 16 X 1.0" SS 2 15 H /" X 4" CLEVIS PIN 1 16 H SPRING, 4-1/" LG X 9/16" OD (42E) 2 H-NJ04C JNYL 1/4" - 20 SS 14 1 H-NJ05C JNYL 5/16"- 1 SS 2 19 H-NJ06C JNYL 3/- 16 SS 2 20 H-RUE14 3/" RUE RING COTTER 1 21 M-6391K403.3 ID X.375 OD X.25 LG BEARING SLEEVE 2 22 M-92391A044 HAIRPIN, 5/16" - 3/" X 1-7/16" S/S 1 TO ORDER COMPLETE (LH) WIPER ASSEMBLY USE PART # C TO ORDER COMPLETE (RH) WIPER ASSEMBLY USE PART # C 15

16 16 Cylindrical Decks 34" HOPPER RAIL SHOWN 40" AND 46" HOPPER RAIL USE PART # " DECK SHOWN 40" DECK USE PART # " DECK USE PART # " HOPPER SHOWN 40" HOPPER USE PART # " HOPPER USE PART # A 34" BRACKET SHOWN 40" (RH) BRACKET USE PART # " (LH) BRACKET USE PART # " (RH) BRACKET USE PART # " (LH) BRACKET USE PART # DETAIL A 16

17 Cylindrical Decks Item Part No. Part Description Qty ROLLER RETAINER PIN SHROUD HINGE SCRUB ARM BRACKET " STROKE 36V ACTUATOR 450 LB LOAD ADJUSTABLE LATERAL ARM CYLINDRICAL CURTAIN TIMING SPROCKET 32 TOOTH TIMING SPROCKET 6 TOOTH M-25 HI-PERFORMANCE PD PLUS BELT MOTOR ADJ BRACKET /" ID, 1/2" OD, 1/4" LG BEARING /" ID, 1/2" OD, 3/" LG, FLANGE BEARING ROLLER BRACKET " CYLINDRICAL LIFTING BRACKET MOTOR 36V 1.5 HP X 350 RPM, 2.2" SHAFT A BEARING HOUSING/BEARING BRUSH DRIVER/IDLER (NEW STYLE) CYLINDRICAL LIFTING BRACKET CYL. LATERAL ARM CYLINDRICAL BRUSHHEAD, 34" " HOPPER HOPPER RAIL HOPPER HANDLE RECESSED HANDLE 1 26 H-015 3/16" X 1" KEY 2 27 H JNYL 3/- 24 SS 4 2 H /16" X 3/4" KEY 2 29 H HB 5/"- 11 X 4" 1 30 H SETSCREW, KCP, 1/4"-20 X 1/4" 31 H-3703 JNYL 5/" H HCS 3/"- 16 X 1" SS 33 H HCS 3/"- 16 X 1-1/2" SS 4 34 H HCS 3/"- 16 X 1-3/4" SS 4 35 H HCS 3/"- 24 X 1" S/S 2 36 H-707 HN 3/"-16 SS H-7061 NYLOK 5/16" - 1 SS 16 3 H-7062 NYLOK 3/"-16 SS 39 H FW 1/4" X 5/" SS 4 40 H FW 5/16" X 3/4" SAE SS H-710 FW 3/" X 7/" SS 2 42 H LW 1/4" SS 4 43 H LW 3/" SS 6 44 H HCS 3/"- 16 X 2-1/2" SS (FULLY THREADED) 1 45 H-7262 FHP #10-32 X 1/2" SS 46 H-7264 FHP X 3/4" SS 6 47 H SHCS 1/4-20 X 1/2 SS 4 H BHSCS 1/4-20 X 5/" SS 4 49 H-7311 BHSCS 3/"- 16 X 1/2" SS 2 50 H-744?? CB 5/16"- 1 X 1/2" SS 51 H-744 CB 1/4"- 20 X.5" SS 2 52 H CB 5/16"- 1 X 3/4" SS H-9095 WASHER, SERRATED BELLEVILLE, 3/", S/S 54 H /" X 4" CLEVIS PIN 2 55 H SPRING, 4-1/" LG, 9/16 OD, (42E) 4 56 H-9025 FW 3/" GRADE 57 H FW 3/" SS 6 5 H-K /16" X 1 1/4" KEY 2 59 H-NJ04C JNYL 1/4" - 20 SS H-NJ05C JNYL 5/16"- 1 SS 6 61 H-RUE14 3/" RUE RING COTTER 2

18 1 Cylindrical Door 5 3 TO ORDER WHOLE DOOR ASSEMBLY USE PART #

19 Cylindrical Door 19 Item Part No. Part Description Qty A IDLER DRIVE BEARING BRUSH DRIVER/IDLER (NEW STYLE) DRIVE COVER GROMMET DOOR LATCH 1 6 H JNYL 3/- 24 SS 1 7 H /16" X 3/4" KEY 1 H-710 FW 3/" X 7/" SS 1 9 H-7262 FHP #10-32 X 1/2" SS 4 19

20 20 Attaching Decks 20

21 Attaching Decks 21 21

22 22 Squeegee Trail Arm TO ORDER COMPLETE SQUEEGEE TRAIL ARM ASSEMBLY USE PART #

23 Squeegee Trail Arm Item Part No. Part Description Qty /" ID, 1/2" OD, 1/4" LG BEARING STAR KNOB, 3/-24 THREAD SQUEEGEE DRAG BRACKET SQUEEGEE SWING PLATE SQUEEGEE TRAIL ARM SQUEEGEE TRIANGLE PLATE GROMMET-3/ ID X 1-1/2 OD X CASTER 2 9 H /2" X 4" CLEVIS PIN 1 10 H JNYL 3/- 24 SS 1 11 H-111 SPRING, 1/2" ID X 2-1/2" LG 1 H FW 3/" X 3/4" NYLON 4 13 H-7062 NYLOK 3/"-16 SS 2 14 H FW 5/16" X 3/4" SAE SS 2 15 H-710 FW 3/" X 7/" SS 4 16 H FW 1/2" USS 2 H LW 3/" SS 1 1 H CB 5/16"- 1 X 3/4" SS 2 19 H CB 3/"- 16 X 1-1/4" SS 2 20 H CB 3/"- 16 X 2.0" SS 2 21 H SPRING, 4-1/" LG X 9/16" OD (42E) 2 22 H-NJ05C JNYL 5/16"- 1 SS 2 23 H-NJ06C JNYL 3/- 16 SS 2 24 H-RUE22 1/2" RUE RING COTTER 1 25 M-6391K403.3 ID X.375 OD X.25 LG BEARING SLEEVE 2 26 M-92240A362 HCS 3/"- 24 X 3.0" SS

24 24 46 Inch Squeegee TO ORDER COMPLETE 46" SQUEEGEE ASSEMBLY USE PART # L LINATEX FRONT SQUEEGEE BLADE G GUM RUBBER FRONT SQUEEGEE BLADE L LINATEX REAR SQUEEGEE BLADE G GUM RUBBER REAR SQUEEGEE BLADE 24

25 46 Inch Squeegee Item Part No. Part Description Qty " WHEEL (GRAY) SPACER 1/2 OD X 1/4" STAR KNOB, 3/-16 THREAD BAND BRACKET HOLDER LATCH REAR SQUEEGEE BAND (RH) (46") REAR SQUEEGEE BAND (LH) (46") FRONT SQUEEGE BAND (46") SQUEEGEE BODY BOTTOM (46") " SQUEEGE BODY SQUEEGE CASTER BRACKET STANDOFF, 1.5" A CLAMPING KNOB 6 14 H JNYL #10-32, 1- S/S 2 15 H SHCS 1/4-20 X 3-1/4 SS 2 16 H-099 BHSCS 3/"- 16 X 3" SS 4 * H JNYL 1/4" H-7062 NYLOK 3/"-16 SS 4 19 H FW 1/4" X 5/" SS 6 20 H LW 1/4" SS 6 21 H LW 3/" SS 4 22* H HCS 3/"- 16 X 3" SS 2 23 H HCS 3/"- 16 X 4" SS 2 24 H FHP 1/4"- 20 X 1" SS 4 25 H-7346 SHCS 1/4-20 X 2.5 SS 2 26 H SHCS 1/4-20 X 3.0 SS 2 27 H BHSCS X 3/" SS 2 2 H HCS 1/4"- 20 X 2.5" SS 6 29 H ID X.50 OD X 2.25 LG SPACER 2 30 H-NJ06C JNYL 3/- 16 SS

26 26 53 Inch Squeegee TO ORDER COMPLETE 53" SQUEEGEE ASSEMBLY USE PART # L LINATEX FRONT SQUEEGEE BLADE G GUM RUBBER FRONT SQUEEGEE BLADE L LINATEX REAR SQUEEGEE BLADE G GUM RUBBER REAR SQUEEGEE BLADE

27 53 Inch Squeegee 27 Item Part No. Part Description Qty " WHEEL (GRAY) SPACER 1/2 OD X 1/4" STAR KNOB, 3/-16 THREAD BAND BRACKET HOLDER LATCH REAR SQUEEGEE BAND (RH) REAR SQUEEGEE BAND (LH) 53" FRONT SQUEEGE BAND " SQUEEGE BODY SQUEEGEE BODY BOTTOM SQUEEGE CASTER BRACKET STANDOFF, 1.5" A CLAMPING KNOB 14 H JNYL #10-32, 1- S/S 2 15 H FHP 1/4"- 20 X 3-1/2" 2 16 H SHCS 1/4-20 X 3-1/4 SS 2 H-099 BHSCS 3/"- 16 X 3" SS 4 1 H JNYL 1/4" H /4-20 LC ACORN NUT 2 20 H-7062 NYLOK 3/"-16 SS 4 21 H FW 1/4" X 5/" SS 22 H LW 1/4" SS 6 23 H LW 3/" SS 4 24 H HCS 3/"- 16 X 3" SS 2 25 H HCS 3/"- 16 X 4" SS 2 26 H FHP 1/4"- 20 X 1" SS 2 27 H SHCS 1/4-20 X 1.75 SS 2 2 H-7346 SHCS 1/4-20 X 2.5 SS 2 29 H SHCS 1/4-20 X 3.0 SS 2 30 H BHSCS X 3/" SS 2 31 H HCS 1/4"- 20 X 2.5" SS 4 32 H ID X.50 OD X 2.25 LG SPACER 2 33 H-NJ06C JNYL 3/- 16 SS 4 27

28 2 60 Inch Squeegee TO ORDER COMPLETE 60" SQUEEGEE ASSEMBLY USE PART # L LINATEX FRONT SQUEEGEE BLADE G GUM RUBBER FRONT SQUEEGEE BLADE L LINATEX REAR SQUEEGEE BLADE G GUM RUBBER REAR SQUEEGEE BLADE 2

29 60 Inch Squeegee Item Part No. Part Description Qty " WHEEL (GRAY) SPACER 1/2 OD X 1/4" STAR KNOB, 3/-16 THREAD BAND BRACKET HOLDER LATCH REAR SQUEEGEE BAND (RH) REAR SQUEEGEE BAND (LH 60") FONT SQUEEGE BAND (60") SQUEEGE CASTER BRACKET " SQUEEGE BODY SQUEEGEE BODY BOTTOM (60") STANDOFF, 1.5" A CLAMPING KNOB 14 H JNYL #10-32, 1- S/S 2 15 H SHCS 1/4-20 X 3-1/4 SS 2 16 H-099 BHSCS 3/"- 16 X 3" SS 4 H JNYL 1/4" H /4-20 LC ACORN NUT 2 19 H-7062 NYLOK 3/"-16 SS 4 20 H FW 1/4" X 5/" SS 21 H LW 1/4" SS 6 22 H LW 3/" SS 4 23 H HCS 3/"- 16 X 3" SS 2 24 H HCS 3/"- 16 X 4" SS 2 25 H FHP 1/4"- 20 X 1" SS 4 26 H SHCS 1/4-20 X 1.75 SS 2 27 H-7346 SHCS 1/4-20 X 2.5 SS 2 2 H SHCS 1/4-20 X 3.0 SS 2 29 H BHSCS X 3/" SS 2 30 H HCS 1/4"- 20 X 2.5" SS 4 31 H HCS 1/4"- 20 X 3.0" SS 2 32 H ID X.50 OD X 2.25 LG SPACER 2 33 H-NJ06C JNYL 3/- 16 SS

30 30 Squeegee Trail Arm and Rear Axle 30

31 Squeegee Trail Arm and Rear Axle 31 31

32 32 Dual Vac Motors

33 Dual Vac Motors Item Part No. Part Description Qty VAC BOX VAC MOTOR GASKET /4" ID X 9-1/2" HOSE V VAC MOTOR, TANGENTAL EXHAUST ELBOW /2" - 2" HOSE CUFF VAC FAN MUFFLER VAC MUFFLER HOSE /2" 90%DI ELBOW LOADER VALVE SWITCH, VACUUM SHUTOFF A VACUUM SWITCH BARB VACUUM FAN MUFFLER CLAMP 1 9/16-2 1/2 " SS CLAMP 1 9/16-2 1/2 " SS " BARBED TEE 1 H CLAMP 2" - 3" 4 1 H CLAMP 5/"- 1-1/2" SS 2 19 H PPH #10-32 X 1/2" S/S

34 34 Vac Motors and Solution Hoses 34

35 Vac Motors and Solution Hoses 35 35

36 36 Tank Lid FOR GRANITE TANK LID USE PART # FOR STAINLESS STEEL TANK LID USE PART #

37 Tank Lid 37 Item Part No. Part Description Qty TANK CLEAR COVER GASKET VAC FORMED CLEAR COVER HOOD STAND " LANYARD TANK LID GASKET HINGE " SS 2 7 H /4-20 LC ACORN NUT 6 H-705 NYLOK #10-32 SS 4 9 H FW 1/4" X 5/" SS 6 10 H LW 1/4" SS 6 11 H-7194 #14 X 1" SELF TAPPING SCREW H PPH #10-32 X 1/2" S/S 4 13 H-7441 CB 1/4"- 20 X 5/" S/S 6 14 H ID X.50 OD X.093 TH NEOPRENE WASHER 2 37

38 3 Tank Baffle FOR BLACK BAFFEL USE PART # FOR STAINLESS STEEL BAFFEL USE PART #

39 Tank Baffle 39 Item Part No. Part Description Qty SNAP GRIP CLAMP VAC BOX SCREEN STRAINER TANK BAND, REAR TANK BAND, FRONT /2(ID) X 16" LG. TANK HOSE "(ID) X 15" LG. TANK HOSE TANK BACK SPLASH TANK BRACE VAC SCREEN CLAMP 1 9/16-2 1/2 " SS 1 H-001 GROMMET 4 13 H JAM NYLOK #10-24 SS 4 14 H CLAMP 3/4"- 1-3/4" SS 2 15 H-705 NYLOK #10-32 SS 2 16 H-7060 NYLOK 1/4"- 20 SS H-7194 #14 X 1" SELF TAPPING SCREW 4 1 H PPH #10-32 X 1" S/S 2 19 H FHP 1/4"- 20 X 1/2" SS 4 20 H CB 1/4"- 20 X.75" SS 4 39

40 40 Solution/Recovery Tank RED TANK USE PART # GRANITE TANK USE PART # FOR BOTTOM TANK DRAIN HOSE USE PART # DRAIN HOSE CHANGE FOR MACHNES WITH SERIAL NUMBER AND HIGHER

41 Solution/Recovery Tank Item Part No. Part Description Qty NPT X 2.0" BARB NPT X 1.50 BARB " NPT X 2" BARB ELBOW, BLACK " DRAIN HOSE " X 3-1/2" REINFORCED TUBING SQUEEGEE HOSE TANK TO VAC HOSE " NPT TANK PLUG SIGHT TUBE TANK UTILITY HANDLE STROBE LIGHT BRACKET LATCH CLAMP 1 9/16-2 1/2 " SS DRAIN HOSE PLUG WAND CLIP VAC WAND DRAIN HOSE END TUBE STROBE LIGHT 1 19 H JAM NYLOK #-32 SS 4 20 H NPT X.5O BARB 1 21 H NPT X 1.0 BARB 1 22 H " BARB X 1.0" BARB ELBOW 1 23 H " NPT TO 1" BARBED ELBOW 1 24 H CLAMP 5/"- 1-1/2" SS 3 25 H-705 NYLOK #10-32 SS 4 26 H-7194 #14 X 1" SELF TAPPING SCREW 5 27 H PPH #10-32 X 1/2" S/S 5 2 H FHP #-32 X 3/" SS

42 42 Tank Mounting 42

43 Tank Mounting 43 43

44 44 Standard Batteries and Seat FOR RED TRAY USE PART # FOR GRANITE TRAY USE PART # RED BATTERY COMPARTMENT LID USE PART # GRANITE BATTERY COMPARTMENT LID USE PART # RED BATTERY COMPARTMENT USE PART # GRANITE BATTERY COMPARTMENT USE PART # (STANDARD) (OPTIONAL) (OPTIONAL) TO ORDER BATTERY WIRING HARNESS USE PART #

45 Standard Batteries and Seat 45 Item Part No. Part Description Qty MICRO SWITCH BATTERY BOX CUP HOLDER TANK TO VAC HOSE MAIN FRAME (2) QUART TRAY SEAT SUPPORT ON BOARD CHARGER TANK CABLE GREY CONNECTOR WITH 1/0 CONTACTS " SS HINGE GROMMET DOOR LATCH SEAT WITH ARM RESTS HINGE, 6-7/" S/S 1 16 H-001 GROMMET 4 H JAM NYLOK #10-24 SS 4 1 H-03 BOLT HEAD CAP 1 19 H /4-20 LC ACORN NUT 5 20 H BATTERY BOOT 21 H-4003 TERMINAL COVER 22 H HCS 1/4"-20 X 1/2 SS" 6 23 H HCS 5/16"- 1 X 1" SS 4 24 H HN 1/4"- 20 SS 1 25 H-705 NYLOK #10-32 SS 6 26 H-7060 NYLOK 1/4"- 20 SS H-7061 NYLOK 5/16" - 1 SS 16 2 H KN 1/4-20 S/S 2 29 H FNW 1/4" X 5/" SS 7 30 H FW 5/16" X 3/4" SS 31 H LW 1/4" SS 5 32 H LW 5/16" SS 4 33 H-7265 FHP X 1" SS 3 34 H-744 CB 1/4"- 20 X.5" SS 4 35 H-7441 CB 1/4"- 20 X 5/" S/S 5 36 H CB 1/4"- 20 X 1-1/2" SS 2 37 H CB 5/16"- 1 X 3/4" SS 10 3 H HCS 1/4"- 20 X 1.5" SS 1 39 H-77 FELT TABS 2 45

46 46 Industrial Battery and Seat 46

47 Industrial Battery and Seat 47 47

48 4 4 Central Command

49 Central Command 49 49

50 50 50 Steering Tower

51 Steering Tower 51 51

52 52 Central Command and Steering Tower 52

53 Central Command and Steering Tower 53 53

54 54 Side Doors 54

55 Side Doors 55 55

56 56 Overhead Guard 56

57 Overhead Guard 57 57

58 5 Water Jet Kit 5

59 Vac Wand Kit 59 59

60 60 SUDS System SOAP OPTIONS: PC707S - CITRUS GREEN PC733S - LOW ph PC755S - HIGH POWER PC757S - GLOSS PC797S - HD 5 DETAIL E E C A DETAIL C DETAIL B B DETAIL A 1 6 D DETAIL D 60

61 SUDS System 61 Item Part Number Part Description Qty SWITCH, TOGGLE, ON/OFF/ON (DPDT) ON-BOARD SOAP TRAY SOAP JUG CAP SOAP PUMP, 36V LATCH 1 6 H-0119 PROTECTIVE BOOT, TOGGLE SWITCH, (GREEN) 1 7 H-0251 CB #10-32 X 1/2" SS 4 H /" NYLON LOOP CLAMP 5 9 H-7056 NYLOK #-32 SS 2 10 H-705 NYLOK #10-32 SS 7 11 H-7060 NYLOK 1/4"- 20 SS 2 H-7239 PPH #-32 X 1/2" S/S 2 13 H-7262 FHP #10-32 X 1/2" SS 3 14 H-7441 CB 1/4"- 20 X 5/" S/S 2 15 H-9307K74 GROMMET, 1" ID X 1-3/4" OD BUNA-N 1 16 M-2974K369 NYLON BARBED TUBE FITTING, 3/16 ID X 1/16" NPT 1 M-5116K46 1/2" X 1/2" BARB 1 1 T-01CR2200 3/16" ID X 22" LG. C.R. TUBE 1 19 T-01CR3200 3/16" ID X 32" LG. C.R. TUBE 1 61

62 62 SUDS System Industrial Battery E DETAIL E C DETAIL C 3 B DETAIL B 13 DETAIL D 1 SOAP OPTIONS: PC707 - CITRUS GREEN PC733 - LOW ph PC755 - HIGH POWER PC757 - GLOSS PC797 - HD 15 A 4 D 3 6 DETAIL A 62

63 SUDS System Industrial Battery 63 Item Part Number Part Description Qty SOAPJUG CAP SWITCH, TOGGLE, ON/OFF/ON (DPDT) INDUSTRIAL SOAP TRAY SOAP PUMP, 36V 1 5 H-0119 PROTECTIVE BOOT, TOGGLE SWITCH, (GREEN) 1 6 H-0251 CB #10-32 X 1/2" SS 3 7 H /" NYLON LOOP CLAMP 3 H-705 NYLOK #10-32 SS 5 9 H-7060 NYLOK 1/4"- 20 SS 4 10 H-7262 FHP #10-32 X 1/2" SS 2 11 H-7441 CB 1/4"- 20 X 5/" S/S 4 M-2974K369 NYLON BARBED TUBE FITTING, 3/16 ID X 1/16" NPT 1 13 M-5116K46 1/2" X 1/2" BARB 1 14 M-9307K23 GROMMET, RUBBER 3/ ID X 7/ OD X 1/ TH T-01CR3200 3/16" ID X 32" LG. C.R. TUBE 2 63