5/09 revised 7/13 FORM NO

Transcription

1 PARTS LIST MODELS: (VD Gas), (VD LP), (VD Diesel) (MD Gas), (MD LP GM3.0L), (MD Diesel S4Q2) (VD LP) 5/09 revised 7/13

2 2 TABLE OF CONTENTS DESCRIPTION Page Main Frame - Variable Dump Main Frame - Manual Dump Main Broom Assembly Main Broom Lift Linkage Side Broom - Variable Dump Broom and Brush Chamber Door Hopper System - Manual Dump Hopper System - Variable Dump Hopper System - Filter and Impeller Hopper System (Valve, Dump Linkage) Scrub Deck & Brushes Rear & Side Squeegees Squeegee Lift Swing Squeegee Support Solution Tank Solution Feed Linkage Recovery Tank Tank Lid System [before January 2009] Tank Lid System [after December 2008] Vacuum Motor & Float Front Wheel and Brake Brake Linkage Rear Wheel Forward/Reverse Control GM 3.0 (Before SN ) Forward-Reverse Control GM 3.0 [After SN ] Forward/Reverse Control GM Foot Pedal Assy Forward-Reverse Control Mitsubishi Diesel [Before SN ] Forward/Reverse Control Mitsubishi Diesel (After SN ) Operator Compartment Hydraulic Hose System - Variable Dump Suction & Return Hoses - Variable Dump Hydraulic Hose System - Manual Dump Suction & Return Hoses - Manual Dump Main Broom Motor and Fittings...70 Side Broom Motor and Fittings...71 Scrub Motors and Fittings...72 Squeegee, Scrub Deck Cylinders & Fittings...73 Power Steering, Hopper Dump, Hopper Lift Cylinders & Fittings Rear Wheel Motor & Fittings Hydraulic Reservoir, Filter & Fittings Drive Pump and Fittings (Before SN )...80 Drive Pump and Fittings (After SN )...81 Vacuum Motor and Fittings Dust Control Impeller and Fittings...84 Power Steering Unit and Fittings...85 Main Control Valve and Fittings Return Manifold and Fittings - Variable Dump Return Manifold and Fittings - Manual Dump Cylinder Control Valve and Fittings Auxiliary Pump & Fittings [Gas]...94 Auxiliary Pump & Fittings [Diesel]...95 Battery Group System Engine Cover Fuel Tank - Gas GM 3.0 Liter Gas Engine (Air Filtration System) GM 3.0 Liter LP Engine (Air Filtration System) IMPCO GM 3.0 Liter LP Engine (Air Filtration System) PSI GM 3.0 Liter Engine - Gas & LP (Supports, Brackets) GM 3.0 Liter Engine - Gas & LP (Exhaust System) GM 3.0 Liter Engine - Gas & LP (Fan, Radiator Hoses) Fuel Tank Assembly - LP Mitsubishi S4Q2 Tier 2 - Diesel Engine (Fan, Exhaust, Hoses) Mitsubishi S4Q2 Tier 2 - Diesel Engine (Supports, Throttle) Mitsubishi S4Q2 Tier 2 - Diesel Engine (Fuel System) Mitsubishi S4Q2 Tier 2 - Diesel Engine (Air Filtration System)

3 TABLE OF CONTENTS (con t) 3 DESCRIPTION Page Mitsubishi S4Q2 Tier 4 - Diesel Engine (Fan, Exhaust, Hoses) Mitsubishi S4Q2 Tier 4 - Diesel Engine (Supports, Throttle) Mitsubishi S4Q2 Tier 4 - Diesel Engine (Fuel System) Mitsubishi S4Q2 Tier 4 - Diesel Engine (Air Filtration System) Fuel Tank - Diesel Radiator Assembly Decals Steering and Instrument Panel Instrument Panel Connections Spare Parts Engine Service Parts - Mitsubishi S4Q2 Diesel Engine Service Parts - GM 3.0 Gas-LP IMPCO Engine Service Parts - GM 3.0 Gas-LP PSI Machine Harness Routing Diagram Gas-LP-Diesel Hydraulics Schematic - Variable Dump Hydraulics Schematic - Manual Dump Electrical Schematic (Gas/LP/Diesel) Options Overhead Guard Option Side Broom Option - Manual Dump Broom Options Back-Up Alarm Option Lights Options Lights & Turn Signals Option Warning Lights w/o Overhead Guard Option Warning Lights for Overhead Guard Option Curb Light Option Fire Extinguisher Option Debris Basket Option Suspension Seat Option Seat Belt Option ESP Option (Detergent & Solution Tank) ESP Option (Recovery Tank & Detergent Pump) ESP Option (Instrument Panel) ESP Option (Wiring) Tire Options Vacuum Wand Option Wet Sweep Bypass Option Auxiliary LP Tank Option Dual Feed LP Tanks Option Solution Off in Neutral Option Stainless Steel Variable Dump Hopper Option Stainless Steel Manual Dump Hopper Option Extended Bumpers Option Wrap-Around Bumpers Option High Torque Drive Wheel Motor Option Hopper High Temperature Shutdown Option Clogged Filter Indicator Option Gallon Solution & Recovery Tanks Option Power Spray Wand Option Timed Filter Shaker Option Broom Selector Guide Brush Selector Guide WHEN ORDERING PARTS * Use the numbers from the Ref. No. columns in this parts list. * Specify the model and serial number of the machine. * Use the space below to record the model and serial number for future reference. Model Serial No.

4 4 MAIN FRAME - VARIABLE DUMP

5 09-5 MAIN FRAME - VARIABLE DUMP Nut-Hex-Jam Zn Nutsert, 1/ Scr-Hex 1/2-13 X /4 Spring Washer /8-16 X 1.0, Carriage Bolt /16 Lock Washer Bolt-Hex Head, Finished, 1/4-20x3/4 LG Bumper Cover-Strg Gear Assy Cover-Support Wing Lh Cover, Support Wing Rh Edging-Brush Drive Support Edging-Brush Drive Support Flat Washer,.687 X.344 X Nut Nut. 1/ Rubber Grommet Screw, 5/16-18 X 1.5 HHC Screw, 5/16-18 X.750 Hhc Spacer Support-Safety Arm (Right) Washer,.625 X.281 X Washer,Lock,1/4 Helical Spring

6 6 MAIN FRAME - MANUAL DUMP /1-06

7 09-5 MAIN FRAME - MANUAL DUMP Main Frame Cover, Steering Gear Assy Insert, 1/4-20 Threaded Flat Washer,.562 x.265 x Lock Washer, 1/4 Helical Spring Bolt, 1/4-20 x 3/4 Fin. Hex Head Edging, Brush Drive Support Rubber Grommet

8 8 MAIN BROOM ASSEMBLY SEE LIFT BROOM LINKAGE

9 09-5 MAIN BROOM ASSEMBLY Hydraulic Motor, Broom Drive Key-Woodruff 1/4 x Arm, Drive Broom Lock Washer, 3/8 Helical Spring Screw, 3/8-14 x 3/4 HHC Hub, Broom Driver Plate, Hub Locking Lock Washer, 1/4 Helical Spring Screw, 1/4-20 x.625 HSHC 10 See Broom Options Lock Washer, 3/4 Helical Spring 12 Intentionally Omitted Bearing Screw, 3/8-16 x 1/2 HSHC Idler Arm, Idler Pivot Collar (Weldment) Spring Pin, 3/8 x Screw, 1/4-20 x 3/4 HHC Gasket, Cover Plate Gasket, Broom Arm Shaft Lift Pin (with Cotter Pin) RH Arm Assembly LH Arm Assembly End Clamp Screw, 1/4-20 x 1.25 HHC Nut, 5/16-18 x.500 x.187 Hex Jam Lock Washer, 5/16 Helical Spring Flat Washer, SS,.750 x.343 x Flange Bearing, 3.75 x Carriage Bolt, 5/16-18 x Shaft, Broom Chamber (Weldment) Dowel Pin Screw, 3/4-10 x 1.25 HHC Retaining Ring, Int Lubrication Fitting, 45 1/8 NPT Flat Washer, 3/ Screw, 1/4-20 x ½

10 10 MAIN BROOM LIFT LINKAGE

11 09-5 MAIN BROOM LIFT LINKAGE Weldment-Crank Link Screw, Hex Head 5/16-18 X Nut-Hex-Jam Zn Scr-Hex 1/2-13 X Weldment Lever Bracket Screw # Bolt-Hex Head, Finished, 1/ Screw, 5/16-18 X.750 HHC Lock Washer, #10 Ext Washer,Lock,1/4 Helical Spring /16 Lock Washer Fitting, Lubrication, Straight, 1/8 Npt /16-18, Hex Nut Nut, Hex 1/ Nut-#10-24 Elastic Stop Nut /16-18 X 7/8 Lg Hex Head Screw Bolt-Hex Head, Finished, 1/ Spring Washer Collar, Set Screw Washer,.625 X.281 X Locknut-Elastic, 1/ Washer, Felt Bracket-Main Broom Adj Bushing, Brush Lift Collar-Setscrew Handle Weldment-Lever Link-Broom Lift Rod-Adjusting Spring, Conical Compression Knob

12 12 SIDE BROOM - VARIABLE DUMP

13 09-5 SIDE BROOM - VARIABLE DUMP Scr-Pan Phil X Wsh, Flt SAE 1/ Scr-Hex 1/4-20 X Scr, Hex 1/4-28 X Nut, Hex Nyl Loc 1/ Nut, Hex Nyl Loc Scr- Hex SS 5/16-18 X Nut, Hex Nyl Loc SS 5/ Wsh-Flt SAE SS 1/ Wsh-Flt SAE SS 5/ Scr, Hex Hd Loc 3/8-16x Scr, Soc Hd 1/4-28 X Bushing Bracket Side Broom Weldment-Arm - Side Broom Motor - Main Broom [ ] Key [ ] Seal Kit (Up to Serial No ) [ ] Seal Kit (Serial No & Above) Washer,.770 ID X 1.50 OD X.063 Thick Flat Washer, 1.00 X.39 X Clamp P-Clamp Clamp-Hose (Double) 1/2 O.D Ref Fitting, -6 SAE X -4 Ors, Str Cable Weldment Flange Strap Broom - Side Set Screw Collar /16-18, Hex Nut Lock Washer, 5/16 H.S. Med Bolt, Carriage [ ] = Not Shown

14 14 BROOM & BRUSH CHAMBER DOOR /1-06

15 09-5 BROOM & BRUSH CHAMBER DOOR Door, Left Hand Broom Chamber Door, Right Hand Broom Chamber Flap, Broom Chamber Door Strap, Door Flap Strap, Broom Chamber Flap, Broom Chamber Strap, Broom Chamber Flap Flap, Broom Chamber Bracket, Flap (Weldment) Gasket Screw, 1/4-20 x 3/4 HHC Gasket (36 ) Lock Washer, 1/4 Helical Spring Latch, Flush Mount Lock Washer, 1/ Nut, 1/4-20 Hex Screw, 1/4-20 x 3/4 BHS Flat Washer,.687 x.343 x Carriage Bolt, 1/4-20 x Screw, 1/4-20 x.875 HHC Flap, Front Broom Chamber

16 16 HOPPER SYSTEM - MANUAL DUMP OPEN CLOSED C-0355/9606

17 09-5 HOPPER SYSTEM - MANUAL DUMP Hopper Flap Strap Screw, 1/4-20 x HHC Hopper Flap Clamp Hopper Flap Cable Guide Hopper Lift Cable Pulley Mounting Bracket Cable Retainer Clip Cable Pulley Hopper Latch Main Frame Spring Baffle Flap Baffle Clamp Hopper Pivot Plate Hopper Collar Hopper Dump Handle Right Hand Cover Center Cover Left Hand Cover Lock Washer, 1/4 Helical Spring Nut, Hex 1/ Screw, 5/16-18 x.875 HHC Lock Washer, 5/16 Helical Spring Screw, 3/8-16 x HHC Flat Washer, 3/8 Bs Lock Washer, 3/8 Helical Spring Nut, Hex 3/ Screw, 3/8-16 x2.750 HHM Screw, 1/2-13 x HHC Lock Washer, 1/2 Helical Spring Handle Latch Screw, 3/8-16 x HHC Flat Washer, 5/16 BS Nut, Hex 5/ Lower Baffle Flap Lower Baffle Clamp Carriage Bolt, 1/4-20 x Nut, Fiber Lock 1/ Flat Washer 1/2 B.S

18 18 HOPPER SYSTEM - VARIABLE DUMP models , , WIRE HARNES POSITION CARRIAGE BOLT AS SHOWN (2 PLACES) 61 NOTE ADJUST AGAINST CYLINDER TO ACTIVATE WHEN HOPPER IS DOWN WITH EITHER OPEN OR CLOSED DOOR HOPPER DOWN SWITCH MOUNTIN

19 09-5 HOPPER SYSTEM - VARIABLE DUMP Hopper Bracket, Impellor Mounting and Guard Vac Fan Motor Impellor Ref. Cylinder Pin Collar Ref. Cylinder Rod End Rod Gasket, Dump Door Clamp, Hopper Flap Flap, Hopper Dump Door, Hopper Nut, 1/4-20 Insert Fiber Pin Seal, Outer Door Strap, Inner Seal Strap, Outer Seal Seal, Door Side Clamp, Door Side Seal Seal, Dump Door Cotter Pin Lube Fitting Lube Fitting Switch Nut, Hex 1/4-20 x.437 x Edging, Hopper Key Clamp Hole Plug Washer,.625 x.281 x Screw, 1/4-20 x.750 HHC Lock Washer, Helical Spring Carriage Bolt, 1/4-20 x Hex Nut, Finished Lock Washer, 5/16 Med Flat Washer,.688 x.344 x Screw, x.75 HHC Screw, x 4.50 HHC Flat Washer,.750 x.391 x Lock Nut, (1-piece) Spacer,.625 x.375 x Nut, 8-32 Fiber Insert LK Wash Ext Tooth STL/ZN Screw, 8-32 x 1.50 PH RHM Flat Washer, x.766 x Spacer, x Nut, Slotted Hex Screw, x.75 HSHC Wshr-Flat.625X.203X.031 STL Wshr-Flat.438X.192X.031 STL.

20 20 HOPPER SYSTEM - FILTER & IMPELLER

21 09-5 HOPPER SYSTEM - FILTER & IMPELLER Grommet Nut, 1/4-20 Insert Fiber Air Deflector, Top Rear Clamp Filter Access Door Bracket, Door Filter Access (RH) Bracket, Door Filter Access (LH) Filter Panel Filter Panel Poly High Flow (Optional) Filter Clamp, Weldment Knob Assembly Shaker Arm Plate, Shaker Motor Motor, Shaker Cover, Filter Shaker Motor Weight, Filter Shaker Cable Latch Gasket, Hopper Access Door Gasket, Hopper Access Door Pin, Shaker Pivot Collar Bumper Stud A 2 Knob Tye-Rap Bushing Nut, Hex 1/4-20 x.437 x Screw, 1/4-20 x HHC Washer,.625 x.281 x Screw, 1/4-20 x.750 HHC Screw, 1/2-13 x HHC Lock Washer, 1/2 HS Med Washer, 9/16 x 1 3/8 x Lock Washer, Helical Spring Carriage Bolt, 1/4-20 x Screw, 1/2-13 x Setscrew, 1/4-20 x.250 HSKCP Nut, 3/8-16 Stop

22 22 HOPPER SYSTEM [HOPPER CONTROL VALVE]

23 09-5 HOPPER SYSTEM [HOPPER CONTROL VALVE] Fitting-90 Sae6 To Ors Fitting, Str. -8 Ors X -8 Sae Fitting-Straight Connector Fitting, Reducer, -6 Orb - -4 Orb Valve - Control

24 24 SCRUB DECK & BRUSHES

25 09-5 SCRUB DECK & BRUSHES Scrub Deck * Drive Brush Assembly Hyd. Scrub Motor Clamp-Hose Fitting, Tee Nipple U Bolt - 1/ Nipple Nipple Hose-Water Feed Hose-Water Feed Nut, 1/ Washer,.50 Split Washer, Helical Spring Bolt, 1/2-13 x 1.75 LG Lockwasher, 5/ Screw, 5/16 with Nylok Nut, Finish Hex, * SERVICE PARTS Drive Hub Hub Plate Brush Drive Arm Spacer Latch Spring Brush Latch Roll Pin /16 Lock Washer Screw Screw /4 Lock Washer Washer

26 26 REAR SQUEEGEE ASSY Squeegee - Weldment Duct - Squeegee Inlet Spacer - Bushing Spacer-Squeegee Kit, Rear Skirt, Squeegee Spacer Squeegee 60 IN Strap - Squeegee Clamp Clamp - End Squeegee Clamp - Nut Knob - Squeegee Caster Assembly Wheel O-Ring Screw, 3/8-16 x HHC Flat Washer,.750 x.390 x Nut, Finish Hex Nut, 3/8-16 Hex Screw, 3/8-16 x 1.25 HHC SS Bolt, Hex Tap 5/16-18 x 1.75 SS Bolt, Carriage, x 3.50

27 09-5 SIDE SQUEEGEE SYSTEM FRONT Nut Hex Nyl Loc SS 1/ Wsh Flt SAE SS 1/ Scr Hex SS 1/4-20 X Kit, Side Skirt, Squeegee Strap Side Squeegee Side Squeegee Weldt RH Side Squeegee Weldt LH Nut-Full Hex-Fin ZN Lock Washer, 1/2 HS Med Hair Pin Pin - Lock Up Pin - Lift

28 28 SQUEEGEE LIFT /12-05

29 09-5 SQUEEGEE LIFT Screw, 3/4-10 X 4.0 HHC Spacer Bracket Flat Washer,.875 x.375 x Nut, 3/8-18 Hex Stop Bolt, 3/8-16 x 1.25 HHC Lift Cylinder Lock Washer, 3/4 Helical Spring Nut, 3/4-10 Fin. Hex Head Arm, Squeegee Lift Pin Assembly Cotter Pin Set Screw, 3/8-16 x 1/2 (Allen Set) Fitting, 90 Elbow (O-Ring) Screw, 3/8-18 x 1.25 Hex Head Nut, 5/16-18 Jam Flat Washer.750 x.343 x Nut, 5/16-18 Fiber Insert Hex Chain, Squeegee Lift Bracket, Squeegee Lift Screw, 5/16-18 x 1.0 HHM

30 30 SWING SQUEEGEE SUPPORT REF MAIN FRAME 2 (2X) APPLY NEVER SEIZE (6X) APPLY LOCTITE TO SETSCREWS (8X) APPLY NEVER SEIZE REF

31 09-5 SWING SQUEEGEE SUPPORT Pivot Bracket, Left Pivot Bracket, Right Shaft Support-Squeegee Collar, W/Setscrew Arm-Squeegee Bushing, Brush Lift Pin, Rear, Weldment Weldment - Squeegee Support Bracket, Angle Wheel, Caster Nut, Hex, 5/ Screw, 3/8-16 X 1-1/2 HHC Nut, Hex, Stop, 3/ /16-18 X 1.25, Hex Head Screw Nut, Hex, Insert Fiber, 5/ /16-18, Hex Nut SCREW, 5/16-18 X 1.5 HHC Spring Bolt, Hex Head, 3/8-16 X 1 1/4 SS Hose-Vacuum - 26 NOTE Hose Clamp NOTE Hose-Vacuum NOTE Tie, Cable Nylon 6/ Hose Tie W/ Eyelet Spring - Extension Wsh Flt SAE 5/16 NOTE 1: Part of Kit

32 32 SOLUTION TANK

33 09-5 SOLUTION TANK Wsh, Flt SAE 3/ Scr-Hex 3/8-16 X Nut, Hex Nyl Loc SS 1/ Nut-Hex Nyl Loc 3/ Scr- Hex SS 1/4-20 X Nut, Hex Nyl Loc SS 5/ Wsh-Flt SAE SS 1/ Scr- Hex SS 5/16-18 X Scr, Hex Hd Loc 1/2-13x Nut-Hex Jam 3/ /4 Npt Plug Nylon Reducer 1/4 Npt X 1/8 Npt Nylon Elbow 1/4 Npt 90 Elbow Solution Tank, Stainless Steel (Standard) Solution Tank, Mild Steel (Option) Spacer Flat Washer, X.531 X Hose Clamp Clamp, Hose Washer, Sealing Fitting-Elbow Fitting, 3/4 Npt Nipple, Nylon Fitting, Plug, 3/4 Npt Strainer, Pump Inlet Fitting Drain Plug Assy Gasket-Tank Drain Seal, Solution Tank Holder, Hose Hose-Sol Tank To Valve Hose Switch, Liquid Level Nut, 1/2-13

34 34 SOLUTION FEED LINKAGE

35 09-5 SOLUTION FEED LINKAGE Fiber Insert Nut, Hex 5/16-18 x Hex Solution Control Lever Bushing Screw, 5/16-18 x HHC Solution Control Link Hose Clamp Hose Fitting, 3/4 Barbed, 14 NPT Nylon Pipe Nipple, 3/4 NPT x 2.00 short Flat Washer,.625 x.281 x Lock Washer, Helical Spring 1/4 Med Screw, 1/4-20 x.750 HHC Fitting, 3/4 NPT, 3/4 Barbed, 90, Nylon Bracket, Solution Pipe Ball Valve Spring Washer,.875 x.500 x Flat Washer,.687 x.343 x Solution Valve Lever Nut, Hex Hvy. 3/8-16 x.687 x Screw, 5/16-18 x HHC Knob Plug, Pipe, 3/4 NPT, Nylon Nipple, Closed 3/4 NPT x 1.38

36 RECOVERY TANK

37 09-5 RECOVERY TANK Scr-Hex 5/16-18 X Scr-Hex 3/8-16 X Wsh, Flt SAE 5/ Wsh, Flt SAE 3/ Scr-Hex 3/8-16 X Scr-Hex 5/16-18 X Nut, Hex Nyl Loc SS 1/ Nut, Hex Nyl Loc 5/ Nut, Hex Nyl Loc 1/ Nut-Hex Nyl Loc 3/ Scr- Hex SS 1/4-20 X Nut, Hex Nyl Loc-Thin 5/ Wsh-Flt SAE SS 1/ Nut, Hex Jam 1/ Nut-Hex Jam 3/ Support Weldment Bracket Clamp Loom - Electrical Recovery Tank - Stainless Steel (Standard) Recovery Tank - Mild Steel (Option) Screw, 1/4-20, Round Head Hose Clamp Bolt, Carriage Washer, Sealing Flat Washer, 1.00 X.39 X Chain-Squeegee Lift Drain Plug Assy Gasket Holder, Hose Hose, Sleeve-Insulating Weldment-Fitting Spacer Gas Spring Stop, 1/ Switch Float (Red) Connector, Bulkhead Stud, 1/2-13unc-2a X 2.50

38 38 TANK LID SYSTEM [BEFORE JANUARY 2009] UPPER COVER SOLUTION TANK P4605/9510 RECOVERY TANK

39 09-5 TANK LID SYSTEM [BEFORE JANUARY 2009] Recovery Tank Lower Cover Recovery Tank Upper Cover Solution Tank Cover Flat Washer, 1/ Edging Screw, 5/16-18 x 1.0 HHC Flat Washer, 5/ Nut, Hex Fiber Insert 5/ Strap Bracket Lower Cover Insulation Lower Cover Insulation Lower Cover Insulation Gasket, Center Section Cover Support Rod Gasket, Perimeter Gas Spring Stud (13 mm) Clip Screw, 1/2-13 x 1.50 HHC Lock Washer, 1/ Nut, Hex 1/4-20 x.437 x Screw, 1/4-20 x 1/2 BHS Screw, 1/4-20 x 1.0 HHC Nut, Hex 1/2-13 x.750 x Lock Washer, 5/16 Helical Spring Nut, 5/ Latch Assembly Screw, x 1/ Sealing Washer,.562 x #10 x Lock Washer, #10 Helical Spring Nut, Hex MS #10-24 x.375 x Screw, 5/16-18 x 3/4 HHC Spring Washer,.750 x.312 x Flat Washer, 5/ Pop Rivet,.125 Dia Strap, Gasket Retainer Strap, Gasket Retainer Flat Washer # Strap, Gasket Retainer Vac Hose Key No.s 4, 5 and 6 must be ordered together for proper fit. Lid Gasket Kit:

40 40 TANK LID SYSTEM [AFTER DECEMBER 2008]

41 TANK LID SYSTEM [AFTER DECEMBER 2008] Weldment, Cover Lower Cover-Upper Weldment Cylinder Hood Strap Sealing Washer Uni-Grip Gasket Sd Gasket-Cover-Recovery Tank Gasket-Cover-Recovery Tank Insulation-Lower Cover Insulation-Lower Cover Insulation-Recovery Tank Top Cover Rod Cover Support Strap-Gasket Retainer Strap-Gasket-Retainer Strap-Gasket Ret. Rec Lid Cover, Weldment Scw-Rhm X.50 Zn Pl Bolt-Hex Head, Finished, 1/ Screw, 5/16-18 X.750 Hhc Flat Washer,.687 X.344 X Washer,.375 X.156 X Washer,Lock,1/4 Helical Spring /16 Lock Washer Nut Hex Nyl-Loc M8X Nut-Hex Nyl Loc Nut, Hex, Insert Fiber, 5/ Rivet Washer-Spr-Shakeproof Latch Assembly

42 42 VACUUM MOTOR & FLOAT

43 09-5 VACUUM MOTOR & FLOAT Kit Scr, Hex 1/4-20 X Wsh, Flt Std 1/ Screw-5/16-18 X 3.50 Hhc Clamp, 4.5 Dia Fan Duct Edging Float Ball Screen Strap-Float Ball Support-Screen Vacuum Motor [ ] Block-Hyd Motor Manifold [ ] Seal Kit [ ] Coil [ ] Valve /4-20 X 1.25 LG Hex Head Screw Screw, 1/4-20 X.50 Long Washer, 25/64 ID X 3/4 Od Washer,Lock,1/4 Helical Spring /16 Lock Washer /16-18, Hex Nut Nut, Hex 1/ Nut, Fiber Insert 1/ Nut, Lock 3/ Rivet Fitting-8 SAE 45 Elbow Fitting, -4 Orb X -4 Ors Elbow, Cover, Fan Impeller Spacer Washer.625 x.281 x.063 [ ] = Not Shown

44 44 FRONT WHEEL & BRAKE

45 09-5 FRONT WHEEL & BRAKE Scr, Soc Hd 3/8-16 X Nut- Lug 1/ Guide-Hopper UHMW Bearing Cup Bearing Cone W/ Seal Washer, 1/2 Lock Pin, Cotter Screw, 1/2-13 X 1.00 Lg, HHC Screw, SHCS 1/4-20 X Cone Timken Bearing Washer-Flat X 14 Slotted Nut Front Axle Weldment-Brake Caliper Assy Brake Disc Hub-Front Wheel Wheel Assembly, Front Grease Cap Stud

46 46 BRAKE LINKAGE 09-5

47 09-5 BRAKE LINKAGE Cross Shaft Brake Pedal Pad, Brake Pedal Lever, Parking Brake Cable, Parking Brake Spacer, Lever Mounting Bracket, Brake Pulley Bracket, Brake Cross Shaft Rod, Brake Pin, Brake Clevis Clevis, 3/8 Rod Clevis, Brake Pedal Bushing, Pulley Pulley Screw, 3/8-16 x 1.50 HHC Nut, 3/8-16 x.562 x.328 Hex Lock Washer, 3/8 Helical Spring Nut, 3/8-16 x.562 x.218 Hex Jam Screw, 5/16-18 x Screw, 5/16-18 x 2.75 HHC Spring Cotter Pin,.062 x Nut, 5/16-18 Fiber Insert Hex Collar w/setscrew, x 1.00 x Screw, 5/16-18 x 1.25 HHC Clamp, 1/2 Cable Screw, 5/16-18 x.75 HHC Screw, 5/16-18 x 3.25 HHC Flat Washer,.687 x.343 x Spacer,.500 x.327 x.780 (Part of #4)

48 48 REAR WHEEL

49 09-5 REAR WHEEL Scr-Hex 1/2-13 X Nut-Hex Nyl Loc 1/ Nut- Lug 1/2-20 NOTE Adapter-Hydraulic Motor Wheel Motor Kit NOTE (Key: - one comes w/motor) NOTE (Motor Seal Kit: - Service Part) NOTE (Shaft Seal Kit: - Service Part) NOTE Wheel Motor NOTE (Key one comes w/motor) NOTE (Nut-Hex Slotted one comes w/motor) NOTE Seal Kit (for ) NOTE Washer Trust Reducer-O-Ring Screw - 1/4-20 X.625 Hhc Screw, 1/2-13 X HHC Washer,Lock,1/4 Helical Spring Fitting, Lubrication, Straight, 1/8 Npt /2-20 Hex Jam Nut DOWEL PIN,.250 X Washer, 1/2 Lock Fitting, Lubrication, 45, 1/8 Npt Screw, Shcs 1/4-20 X Key- 1/4 Sq. X 1.75 Steel Bearing, Thrust (Timken #T581) Bearing, Cup (Timken #15245) Ring- O Cotter Pin (1/8 Dia. X 2 Lg.) Nut, Hex Slotted 3/4-16 X X Fitting-90$ Elbow (O-Ring) Fitting, -10 SAE X -10 ORS, Swivel Fitting, -4 Ors Swivel 90$ Elbow Spur Gear Rear Wheel Guide, Rack Hub - Drive Wheel NOTE Plate - Bearing Mounting Rack Stud NOTE Support, Rear Wheel Tire & Outer Rim NOTE 1 [ ] Tire, Rear Wheel Non Marking [ ] Directional Rear Wheel Kit [ ] Tire, Rear Wheel (Hvy Duty Option) [ ] Tire, Rear Wheel (Directional) TSBUS Nut, 3/4-16 x x.641 Slotted Hex NOTE Nut, Hex, Slotted NOTE 3 [ ] = Not Shown NOTE 1: All of these parts can be ordered together in Tire & Hub Service kit Hub Assembly w/pressed-in studs (Item No. s 28 & 31): NOTE 2: Used on machines up to Serial No NOTE 3: Used on machines Serial No and above.

50 50 FORWARD/REVERSE CONTROL - GM 3.0 (BEFORE SN ) /12-05

51 09-5 FORWARD/REVERSE CONTROL - GM 3.0 (BEFORE SN ) Transmission Arm Lock Washer, 1/4 Int Isolator Nut, 1/4-20 Hex Plate, Hydrostat Arm Screw, 1/4-20 x 1/2 HHC Lock Washer, 5/16 Med Helical Spring Screw, 5/16-18 x 1.5 HHC Spacer, Transmission Arm Screw, 1/4-20 x 2.25 HHC Nut, 1/4-20 Fiber Insert Centering Control Cable, Forward/Reverse Cable Washer,.625 x.281 x Screw, 1/4-20 x Spacer, 1/4 OD x 1/2 ID x 5/ Rod End, 1/4 Female Rod, 1/4-28 x 3.0 Centering Control Adjustment Nut, 1/4-28 x.437 x.156 Hex Jam Flat Washer,.750 x.281 x Screw, 1/2-13 x 1.25 HHC Nut, 1/2-13 Elastic Lock Reflective Sleeve, 1 dia. x Flat Washer,.750 x.390 x Lock Washer, 3/8 Helical Spring Bolt, 3/8-16 x 1.25 Hex Head Clamp Screw, 1/4-20 x.750 HHC

52 52 FORWARD-REVERSE CONTROL - GM 3.0 [AFTER SN ]

53 09-5 FORWARD-REVERSE CONTROL - GM 3.0 [AFTER SN ] Clamp Wsh, Flt SAE 5/ Scr, Hex 3/8-16 X Wsh, Flt SAE 3/ Scr, Hex 5/16-18 X Scr, Hex 3/8-16 X Nut, Hex Nyl Loc-Thin 3/ Nut, Hex Nyl Loc-Thin 1/ Hydroback Rod End Adjuster Pintle G/LPG Arm Weld Pintle Arm Weldment Bolt, Hex Head, 3/8-16 X 1 1/4 SS Bolt-Hex Head, Finished, 1/4-20x3/4 LG Washer, 25/64 ID X 3/4 OD Washer-Lock, 3/8, Helical SprIng Washer,.625 X.281 X Cable, Fwd / Rev Reflective Sleeve, 1 Dia. X Nut-1/4-28 Hex Jam

54 54 FORWARD/REVERSE CONTROL - GM FOOT PEDAL ASSY /4-06

55 09-5 FORWARD/REVERSE CONTROL - GM FOOT PEDAL ASSY Bracket, Foot Pedal Mount Foot Pedal Flat Washer,.750 x.390 x Carriage Bolt, 5/16-18 x 3/ Bracket, Foot Pedal Prox. Switch Flat Washer,.687 x.344 x Nut, 5/16-18 Fiber Insert Hex Switch, Low Dump Hopper Proximity * A/R Connector B-Type Sensor (Harness connector for ) Bracket, Accel. Cable Mounting NOTE Bracket, Accel. Cable Mounting NOTE Clevis Cable, Forward/Reverse Cable Nut, 1/4-28 x.437 x.156 Hex Jam Screw, 1/4-20 x 3/4 HHC Washer,.625 x.281 x Nut, 1/4-20 Fiber Insert Shoulder Screw, 1/4 x 5/ Nut, #10-24 Elastic Stop NOTE 1: Used on machines up to Serial No NOTE 2: Used on machines Serial No and above.

56 56 FORWARD-REVERSE CONTROL - MITSUBISHI DIESEL [BEFORE SN ] P5118ecp/

57 FORWARD-REVERSE CONTROL - MITSUBISHI DIESEL [BEFORE SN ] Nut, Hex 1/4-20 x.437 x Lock Washer, Helical Spring 1/4 Med Lock Washer, Helical Spring 5/16 Med Screw, 5/16-18 x HHC Transmission Arm Isolator, 1/ Screw, 1/4-20 x HHC Transmission Arm Plate Spacer, Transmission Arm Screw, 1/4-20 x.750 HHC Nut, Hex Jam 1/4-28 x.437 x Rod, 1/4-28 x Rod End, 1/ Lock Washer, Helical Spring 1/2 Med Nut, Hex 1/2-13 x.875 x Centering Control Lock Washer, 1/4 Int Screw, 1/2-13 x HHC 19 1 Centering Control Bracket Nut, Hex 5/16-18 x.500 x Screw, 5/16-18 x.750 HHC Forward Reverse Pedal Bracket Forward Reverse Pedal Flat Washer,.750 x.390 x Carriage Bolt, 5/16-18 x Bracket, Foot Pedal Prox. Switch Switch, Proximity * A/R Connector B-Type Sensor (Harness connector for ) Screw, #10-24 x.625 x.375 SH Clevis Forward / Reverse Cable Cable Mounting Bracket Flat Washer,.750 x.281 x Hose Clamp, Flat Washer, Transmission Arm Nut, Hex Fiber Insert # Insulating Sleeve Nut, Hex Fiber Insert 1/ Screw, 1/4-20 x.500 HHC Bracket, Forward/Reverse Cable Hydroback Bracket

58 58 FORWARD/REVERSE CONTROL - MITSUBISHI DIESEL (AFTER SN )

59 FORWARD/REVERSE CONTROL - MITSUBISHI DIESEL (AFTER SN ) Nut, Hex 1/4-20 x.437 x Lock Washer, Helical Spring 1/4 Med Lock Washer, Helical Spring 5/16 Med Rod End Screw, Hex 5/16 18x Plate, Pintle Arm Adjuster, Pintle Arm Hydroback Nut, Hex Nyl Loc Thin ¼ Screw, 1/4-20 x.750 HHC Nut, Hex Jam 1/4-28 x.437 x Pintle Arm Weldt Wsh, Flt SAE 3/ Screw, Hex 3/8 16 x Screw, Hex 3/8 16 x Nut, Hex Nyl Loc Thin ¼ Nut, Hex 5/16-18 x.500 x Forward Reverse Pedal Bracket Forward Reverse Pedal Flat Washer,.750 x.390 x Carriage Bolt, 5/16-18 x Bracket, Foot Pedal Prox. Switch Switch, Proximity [ ] A/R Connector B-Type Sensor (Harness connector for ) Screw, #10-24 x.625 x.375 SH Clevis Forward / Reverse Cable Bracket, Accel Cable Mount Flat Washer,.750 x.281 x Hose Clamp, Nut, Hex Fiber Insert # Insulating Sleeve Washer, Flt SAE 5/16 [ ] = Not Shown

60 OPERATOR COMPARTMENT

61 09-5 OPERATOR COMPARTMENT Kit Scr, Hex 1/4-20 X.62 NOTE Wsh, Flt SAE 5/ Wsh, Flt SAE 3/ Wsh, Flt SAE 1/ Scr Hex Hp Loc-1/4-20 X Nut, Hex Nyl Loc 5/ Nut, Hex Nyl Loc 1/ Nut, Hex Nyl Loc Nut, Hex Nyl Loc 1/ Screw10-24 X.62 Pnh Ph Nut, Hex Machine 1/ Bracket Throttle Control Mtg NOTE Bracket Throttle Cable Mtg NOTE Drive Compartment Cover Weldment Seat Slide-Seat Lever-Throttle Control Weldt NOTE Handle Seat Cover Latch Panel-Access Bolt-Car, X 1 Gr 5 Zn NOTE Washer-Flat.500 X.219 X Washer-Lock, #10-24, Helical Spring Nut Plug, Plastic,.44 Dia NOTE Screw, #10-24 X 1.00 Truss Head Cable Clamp NOTE Switch Plug, Sealed Panel NOTE Cable-Throttle-80 LG. NOTE Clevis NOTE Rod End-Spherco NOTE Grip, Cover Latch Knob-Solution Control NOTE Pin-Striker Conduit Clamp NOTE Edging Brake Link Latch, Rotary Indicator-Mil Light NOTE Switch Body-High Current NOTE 2 [ ] Actuator Throttle Efi425 NOTE /16 In Hole Plug Black Scw-Hhc X.63 Gr 8 Zn Nut Insert 1/ Scr Soc Hd 3/8-16 X Nut Hex Nyl Loc 3/ Wshr-Fl..750x.391x.093 Stl Zn Wshr-Fl..625x.281x.063 Stl.Zn [ ] = Not Shown NOTE 1: These parts are only used on Diesel models. NOTE 2: These parts are only used on Gasoline/Petrol and LPG models.

62 62 HYDRAULIC HOSE SYSTEM - VARIABLE DUMP B A B TO RETURN MANIFOLD FROM RESERVOIR A TOP HOSE P T 1 P T B C A D 38 T P A B C1C 3C2C C C 21 TO POWER STEERING UNIT TO DOUBLE GEAR PUMP PRIORITY PORT - TOP 7 TO DOUBLE GEAR PUMP SECONDARY PORT - BOTTOM TO VAC MOTOR RECOVERY TANK

63 09-5 HYDRAULIC HOSE SYSTEM - VARIABLE DUMP 63 1< Hydraulic Hose ORS 4-STR 110 3< Hydraulic Hose ORS 4-90 to STR < Hydraulic Hose ORS 4-90 to STR 80 5< Hydraulic Hose ORS 8-90 to STR Hydraulic Hose ORS 8-STR 94 7* Hydraulic Hose ORS 8-STR Hydraulic Hose ORS 4-90 to STR Hydraulic Hose ORS 4-90 to STR 26 10< Hydraulic Hose ORS 4-STR 60 11< Hydraulic Hose ORS 4-STR Hydraulic Hose ORS 8-45 to STR Hydraulic Hose ORS 8-90 to STR Hydraulic Hose ORS 4-90 to STR Hydraulic Hose ORS 4-90 to STR Hydraulic Hose ORS 4-STR Hydraulic Hose ORS 4 90 to STR Hydraulic Hose ORS 8-90 to STR Hydraulic Hose ORS 4-90 to STR Hydraulic Hose ORS 8-90 to STR Hydraulic Hose ORS 8-STR Hydraulic Hose, ORS 4-90 to STR 29 27< Hydraulic Hose ORS 4-STR 15 28< Hydraulic Hose ORS 8-45 to STR Hydraulic Hose ORS 4-STR Hydraulic Hose ORS 8-90 to STR ORFS Union, 13/ Hydraulic Hose ORS 4-STR 67 * = Diesel Only + = Components of , common hydraulic hose kit. < = Components of , VD hydraulic hose kit.

64 64 SUCTION & RETURN HOSES - VARIABLE DUMP 09-5 DUMP CYLINDER 30 SIDE BROOM MOTOR DUST CONTROL MOTOR 2 37 LIFT CYLINDER 16 SQUEEGEE VACUUM MOTOR MAIN BROOM MOTOR HOPPER CONTROL VALVE CYLINDER CONTROL VALVE SIDE BROOM VALVE MAIN CONTROL VALVE POWER STEERING UNIT DRIVE & AUXILIARY PUMP RETURN MANIFOLD STRAINER SCRUB BRUSH MOTOR POWER STEERING CYLINDER DRIVE WHEEL MOTOR 31 OIL COOLER SCRUB DECK CYLINDER 8 SQUEEGEE DECK CYLINDER RESERVOIR FILTER

65 09-5 SUCTION & RETURN HOSES - VARIABLE DUMP * Hydraulic Hose ORS 4-90 to STR 119 6* Hydraulic Hose ORS 8-90 to STR 68 8* Hydraulic Hose ORS 4-90 to STR 38 14# Hydraulic Hose ORS 4-STR 30 15# Hydraulic Hose ORS 4-90º to STR 42 16* Hydraulic Hose ORS 8-STR 80 23# Hydraulic Hose ORS 4-STR # Hydraulic Hose ORS 8-45 to STR # Hydraulic Hose ORS 4-90 to STR # Hydraulic Hose ORS 8-90 to STR 35 34# Hydraulic Hose ORS 16-STR 46 NOTE 1 34# Suction Hose NOTE Hydraulic Hose 1.0 ID Low Pressure 33 36# Hydraulic Hose ORS 4-STR 37 37* Hydraulic Hose ORS 4-STR 49 39# Hydraulic Hose ORS 4-90º to STR 55 # = Components of , common hydraulic hose kit. * = Components of , VD hydraulic hose kit. NOTE 1: Used on machines up to Serial No NOTE 2: Used on machines Serial No and above.

66 66 HYDRAULIC HOSE SYSTEM - MANUAL DUMP 09-5

67 09-5 HYDRAULIC HOSE SYSTEM - MANUAL DUMP Hydraulic Hose ORS 8 Str. to JIC 8 Str Hydraulic Hose ORS 4-90 to Str Hydraulic Hose ORS 8-Str.to 8 Str. 94 4* Hydraulic Hose ORS 8-Str.to 8 Str Hydraulic Hose ORS 4-Str. Ends Hydraulic Hose ORS 4-90 to Str < Hydraulic Hose ORS 4-90 to Str Hydraulic Hose ORS 4-Str. to 4 Str Hydraulic Hose ORS 4-Str. to 4 Str Hydraulic Hose ORS 8-90 to 8 Str Hydraulic Hose ORS 8-90 to 8 Str Hydraulic Hose ORS 4-90 to 4 Str Hydraulic Hose ORS 8-90 to 8 Str Hydraulic Hose ORS 8-45 to 8 Str Hydraulic Hose ORS 16-Str. Ends 46 NOTE Suction Hose NOTE Hydraulic Hose ORS 4-90 to Str Hydraulic Hose ORS 8-90 to 12 Str Hydraulic Hose ORS 4-90 to Str Hydraulic Hose ORS 4-90 to Str Hydraulic Hose ORS 4-Str Hydraulic Hose ORS 4-Str Hydraulic Hose ORS 8-45 to Str Hydraulic Hose ORS 8-90 to 8 Str < Hydraulic Hose ORS 4-Str Low Pressure 33 (see page 62-63) Hydraulic Hose ORS 4-90 to Str Hydraulic Hose ORS 8-Str Hydraulic Hose ORS 8-90 to Str Hydraulic Hose ORS 8-90 to Str. 35 * = Diesel Only + = Hoses are components of common hydraulic hose kit. < = Hoses for Side Broom Option NOTE 1: Used on machines up to Serial No NOTE 2: Used on machines Serial No and above.

68 68 SUCTION & RETURN HOSES - MANUAL DUMP SQUEEGEE VACUUM MOTOR 1 7 MAIN CONTROL VALVE 29 MAIN BROOM MOTOR 27 5 CYLINDER CONTROL VALVE 9 OPTION SIDE BROOM VALVE 14 POWER STEERING UNIT DRIVE & AUXILIARY PUMP A 17 STRAINER RETURN MANIFOLD SCRUB BRUSH MOTOR 25 9 SCRUB DECK CYLINDER FILTER POWER STEERING CYLINDER OIL COOLER DRIVE WHEEL MOTOR SQUEEGEE DECK CYLINDER 18 RESERVOIR /1-06

69 09-5 SUCTION & RETURN HOSES - MANUAL DUMP Hydraulic Hose ORS 8 Str. to JIC 8 Str Hydraulic Hose ORS 4-90 to Str Hydraulic Hose ORS 4-Str. Ends 30 7+< Hydraulic Hose ORS 4-90 to Str Hydraulic Hose ORS 4-Str. to 4 Str Hydraulic Hose ORS 8-45 to 8 Str Hydraulic Hose ORS 16-Str. Ends 46 NOTE Suction Hose NOTE Hydraulic Hose ORS 4-90 to Str Low Pressure Hydraulic Hose ORS 4-Str. to 4 Str Hydraulic Hose ORS 8-Str Hydraulic Hose ORS 8-90 to Str Hydraulic Hose ORS 8-90 to Str = Hoses are components of common hydraulic hose kit. < = Hoses for Side Broom Option NOTE 1: Used on machines up to Serial No NOTE 2: Used on machines Serial No and above.

70 70 MAIN BROOM MOTOR & FITTINGS TO PRESSURE PORT OF DUST CONTROL MOTOR TO"1" PORT ON MAIN CONTROL VALVE 6 TO UNION FITTING THEN TO PRESSURE PORT OF DUST CONTROL MOTOR P / TO RETURN MANIFOLD Main Broom Motor Motor Seal Kit (Service Part) ORFS 90 Elbow, 3/4-16 to 13/ Ref. Hose ORFS Connector, 7/16-20 to 9/ Ref. Hose Ref. ORFS Union, 13/16-16

71 SIDE BROOM MOTOR & FITTINGS 71 TO PORT "1" ON SIDE BROOM CONTROL VALVE TO PORT "3" ON SIDE BROOM CONTROL VAVLE FROM P1 MAIN CONTROL BLOCK TO A PORT SIDE BROOM MOTOR 1 2 B A TO TOP OF RETURN BLOCK 8 TO B PORT SIDE BROOM MOTOR 9 P4379A/ ORFS Connector, 9/ Hydraulic Motor [ ] Seal Kit for (Up to Serial No ) [ ] Seal Kit for (Serial No & Above) [ ] Key Ref. Hose Fitting, Union 9/16-18 ORS Ref. Hose Washer, Flat Fitting, Valve, Housing - 3 way Fitting, Run tee Screw Lock Washer [ ] = Not Shown

72 72 SCRUB MOTORS & FITTINGS REF SCRUB DECK FRONT OF MACHINE P3810b Fitting - 10 SAE - 8 ORS Fitting - 10 SAE ORS Fitting - 10 SAE - 8 ORS Fitting - 8 SAE - 8 ORS Hose End Hose End Scrub Motor Hyd Seal Kit for Motor

73 09-5 SQUEEGEE, SCRUB DECK CYLINDERS & FITTINGS TO "C2" PORT ON CYLINDER CONTROL VALVE TO "C1" PORT ON CYLINDER CONTROL VALVE 4 TO "C3" PORT ON CYLINDER CONTROL VALVE 1 1 TO "C4" PORT ON CYLINDER CONTROL VALVE P ORFS 90 Elbow, 7/16-20 to 9/ Hydraulic Cylinder (Squeegee) Hydraulic Cylinder (Scrub Deck) Ref. Hose Ref. Hose Ref. Hose

74 74 POWER STEERING, HOPPER DUMP, HOPPER LIFT CYLINDERS & FITTINGS 09-5 TO WORK PORT "C" ON HOPPER PUMP VALVE 10 TO WORK PORT "D" ON HOPPER DUMP VALVE 9 TO WORK PORT "A" ON HOPPER DUMP VALVE 12 TO RETURN MANIFOLD TO WORK PORT "B" ON HOPPER DUMP VALVE HOPPER LIFT (VARIABLE DUMP ONLY) 8 17 HOPPER DUMP (VARIABLE DUMP ONLY) TO PORT "R" ON POWER STEERING UNIT 7 19 TO PORT "L" ON POWER STEERING UNIT POWER STEERING 2 P4878 5

75 09-5 POWER STEERING, HOPPER DUMP, HOPPER LIFT CYLINDERS & FITTINGS Ref. Hose ORFS 90 Elbow, 7/16-20 to 9/ Ref. Hose Dump Cylinder Ref. Hose Ref. Hose Steering Cylinder [ ] Dump and Steering Cylinders Seal Kit Lift Cylinder [ ] Lift Cylinder Seal Kit ORFS Connector, 7/16-20 to 9/ Ref. Hose Ref. Hose Run Tee Fitting Fitting, Check Valve Fitting Adapter, 9/16-18 ORFS - 1/4-18 NPT Adapter Fitting Adapter Fitting Ref. Hose [ ] = Not Shown

76 76 REAR WHEEL MOTOR & FITTINGS

77 09-5 REAR WHEEL MOTOR & FITTINGS Nut, Fiber Lock 5/16-18 THD s Spring Washer,.750 x.312 x Flat Washer, For 5/16 Bolt (.687 x.343 x.062) Nut, Hex Jam 5/ Hose Clamping Unit Split Hose Bushing Screw, 5/16-18 x HHC Fitting Hose Hose Adaptor-Hydraulic Motor NOTE Reducer W/O Ring NOTE Ring O NOTE Elbow, 90 Deg Swivel NOTE Elbow, 90 Deg Adaptor NOTE Wheel Motor NOTE 2 [ ] (Key one comes w/motor) NOTE 2 [ ] (Nut-Hex Slotted one comes w/motor) NOTE 2 [ ] Seal Kit (for ) NOTE 2 [ ] Fitting NOTE 1 [ ] Fitting NOTE 1 [ ] Seal NOTE 1 [ ] Fitting NOTE 1 [ ] Wheel Motor Kit NOTE 1 [ ] Motor Seal NOTE 1 [ ] Shaft Seal for Eaton P/N NOTE 1 [ ] Shaft Seal for Eaton P/N NOTE 1 [ ] = Not Shown NOTE 1: Used on machines up to Serial No NOTE 2: Used on machines Serial No and above.

78 78 HYDRAULIC RESERVOIR - FILTER & FITTINGS TO RETURN MANIFOLD TO CASE DRAIN ON SQUEEGEE VAC MOTOR TO CYLINDER CONTROL VALVE (T-PORT) 22 TO CASE DRAIN ON DUST CONTROL MOTOR TO AUXILIARY PUMP ON TRANSMISSION 1 Before SN

79 09-5 HYDRAULIC RESERVOIR - FILTER & FITTINGS # Elow Barbed Hyd Fitting NOTE 2 2# Nutsert, 1/4-20 3# Cover-Reservior 4# Scw-Rhm X.50 Zn Pl 5# Bolt-Hex Head, Finished, 1/4-20 6# Washer,Lock,1/4 Helical Spring 7# Washer-Lock, #10-24, Helical Spring 8# Clamp, Hose 9# Clamp NOTE 2 10# Screw-T/C HH #10-24 X.50 LG 11# Fitting-Straight Connector 12# Fitting, -16 Orb, Str Hose Barb 13# Plug-1/2 Npt Hex Soc Pipe 14# Filter-Return (Immersed) 15# Filter Cap-Reservoir 16# Edging 17# Gauge, Fluid Level (Hydraulic Oil) 18# Strainer NOTE 1 19# Fitting, 3/4 NPT x 1 7/16-12 NOTE 1 20# Hose NOTE 1 21# Hose NOTE 2 22# Hose 23# Hose 24# Hose 25# Plug, 7/16-20 O-Ring NOTE 3 26# Hose # = Revised or new since last update NOTE 1: Used on machines up to Serial No NOTE 2: Used on machines Serial No and above. NOTE 3: Manual Dump Only.

80 80 DRIVE PUMP & FITTINGS (BEFORE SN ) TO VAC MOTOR ORFS Connector, 1 1/16-12 to 13/ ORFS 90 Elbow, 9/ Drive Pump ORFS 90 Elbow, 1 1/16-12 to 13/ Tee Fitting Ref. Auxiliary Pump (Double Gear) Ref. Hose Ref. Hose Screw, x 1.25 HHC Ref. Hose Kit, Pump Assembly Lock Washer, Helical Spring Hose, ORS 8-STR, Flat Washer,.750 x.391 x.093

81 DRIVE PUMP & FITTINGS [AFTER SN ] Drive Pump [ ] Seal Kit (for ) [ ] Relief Valve 3500 PSI (for ) ORFS Connector, 1 1/16-12 to 13/ Tee Fitting ORFS 90 Elbow, 1 1/16-12 to 13/ Fitting O-Ring Washer, Flat SAE 3/ Screw, Hex Loc 3/8 16 x 1.25

82 82 VAC MOTOR & FITTINGS

83 09-5 VAC MOTOR & FITTINGS Fitting, 90º Elbow (O-Ring) Fitting, -4 ORB x -4 ORS, 45º Elbow

84 84 DUST CONTROL IMPELLER & FITTINGS Fitting, 90 #4 SAE x #4 ORS Fitting, 90 #8 SAE x #8 ORS Dust Control Motor Ref. Hose Ref. Hose Fitting, STRT #8 SAE x #8 ORS

85 09-5 POWER STEERING UNIT & FITTINGS T L P R P4834/9705 TO POWER STEERING CYLINDER TO PRIORITY PORT ON DOUBLE GEAR PUMP 8 TO POWER STEERING CYLINDER TO PORT T ON CYLINDER CONTROL BLOCK Power Steering Unit ORFS Boss Reducer, 3/4-16 to 9/ Fitting, Straight ORFS Connector, 9/ Ref. Hose Ref. Hose Ref. Hose, 67

86 86 MAIN CONTROL VALVE & FITTINGS TO HOPPER DUMP VALVE T1 P P 3 TO RETURN MANIFOLD TO DUST CONTROL MOTOR P4833A/0603 TO AUXILIARY PUMP TO MAIN BROOM MOTOR(BOTTOM PORT) TO PORT "2 ON SIDE BROOM VALVE

87 09-5 MAIN CONTROL VALVE & FITTINGS Valve Fitting - Straight ORFS 90 Elbow, 3/4-16 to 13/ ORFS 90 Elbow, 7/16-20 to 9/16-18 (Gas Only) 5** Ref. Hose 5# Ref. Hose Ref. Hose 9** Fitting ** Fitting - Straight Screw, 1/4-20 x HHC Lock Washer, 1/4 Split Nut, Hex 1/4-20 x.437 x Flat Washer For 1/4 Bolt 18** Fitting - Straight 18# ORFS 90 Elbow, 3/4-16 to 13/16-16 ** = Diesel Only # = Gas Only

88 88 RETURN MANIFOLD & FITTINGS - VARIABLE DUMP FROM REAR OIL COOLER FROM SIDE BROOM VALVE FROM RESERVOIR FROM DRIVE PUMP MAIN FRAME BACKBONE FROM CASE DRAIN REAR WHEEL MOTOR 11 2 FROMCASE DRAIN MAIN BROOM MOTOR FROM FRONT PORT OF HOPPER LIFT CYLINDER FROM CONTROL VALVE (PORT TI) FROM CASE DRAIN ON DRIVE PUMP FRONT OF MACHINE revE/1-06

89 09-5 RETURN MANIFOLD & FITTINGS - VARIABLE DUMP Screw, 1/4-20 x 3.0 HHC Return Manifold Reducer (O-Ring Face), ORS 8 to Nut for Reducer ORFS 90 Elbow, 3/4-16 to 13/ Hose Hose Valve-Check Hose Fitting, Straight Barbed Stem, /2 x.50 x Fitting, ORFS Connector, 7/16-20 to 9/ Hose Hose Check Valve Kit Hose Hose Hose Clamp, 13/16 to 1.50 Hose Flat Washer,.56 x.26 x Lock Washer, ¼

90 90 RETURN MANIFOLD & FITTINGS - MANUAL DUMP FROM REAR OIL COOLER FROM SIDE BROOM VALVE FROM RESERVOIR FROM DRIVE PUMP MAIN FRAME BACKBONE FROM CASE DRAIN REAR WHEEL MOTOR FROM CASE DRAIN MAINBROOM MOTOR FROM CONTROL VALVE (PORT TI) FROM CASE DRAIN ON DRIVE PUMP FRONT OF MACHINE revE/1-06

91 09-5 RETURN MANIFOLD & FITTINGS - MANUAL DUMP Screw, 1/4-20 x 3.0 HHC Return Manifold Reducer (O-Ring Face), ORS 8 to Nut for Reducer ORFS 90 Elbow, 3/4-16 to 13/ Plug, 7/16-20 O-Ring Check Valve Kit Hose Flat Washer,.56 x.26 x Fitting, Straight Barbed Stem, /2 x.50 x Fitting, ORFS Connector, 7/16-20 to 9/ Lock Washer, 1/ Hose Hose Hose Hose Clamp, 13/16 to 1.50 Hose Hose Hose Valve, Check

92 92 CYLINDER CONTROL VALVE & FITTINGS C4 C1 C2 2 4 T P A B C3 TO LOWER PORT OF SQUEEGEE CYLINDER TO UPPER PORT OF SCRUB DECK CYLINDER TO UPPER PORT OF SQUEEGEE CYLINDER TO LOWER PORT OF SCRUB DECK CYLINDER TO PORT "T" ON POWER STEERING UNIT /2-02 TO REAR CASE DRAIN PORT ON RESERVOIR

93 09-5 CYLINDER CONTROL VALVE & FITTINGS Screw, 1/4-20 x 3.50 HHC Valve Straight Fitting ORFS 90 Elbow, 7/16-20 to 9/ Lock Washer, 1/4 Split Plug Flat Washer, 1/ Cavity Plug

94 94 AUXILIARY PUMP & FITTINGS [GAS] BEFORE SN Auxiliary Pump [ ] Seal Kit (for ) Fitting, 90 Elbow ORFS Run Tee, 13/ ORFS Cap, #8 ORS Fitting, Reducer Fitting, 90 Elbow Elbow Barbed Hydraulic Fitting NOTE Clamp-Witteck-C24P NOTE Fitting, 90 Elbow NOTE 1 NOTE 1: Used on machines up to Serial No NOTE 2: Used on machines Serial No and above.

95 09-5 AUXILIARY PUMP & FITTINGS [DIESEL] BEFORE SN Auxiliary Pump [ ] Seal Kit (for ) Fitting, 90 Elbow ORFS Run Tee, 13/ ORFS Cap, #8 ORS Fitting, Reducer Fitting, 90 Elbow Elbow Barbed Hydraulic Fitting NOTE Clamp-Witteck-C24P NOTE Fitting, 90 Elbow NOTE 1 NOTE 1: Used on machines up to Serial No NOTE 2: Used on machines Serial No and above.

96 96 BATTERY GROUP SYSTEM

97 09-5 BATTERY GROUP SYSTEM Kit Wsh, Flt SAE 5/ Wsh, Flt SAE 1/ Nut, Hex Nyl Loc 5/ Nut, Hex Nyl Loc 1/ Scr-Carriage SS 5/16-18 X Bolt Carr X.75 Gr5 Zn Hinge Battery Access Door Door-Battery Access Clamp Fuel Tank Bolt, Carriage Clamp, 3/4 Wire, Double Washer-Screw-Captivated U Clip-Screw-Captivated Fastener, Qtr. Turn Bumper [ ] Cable, Battery (+) (to Starter) (Gas/LP) [ ] Cable, Battery (-) (to Ground) (Gas/LP) [ ] Cable, Battery (-) (to Ground) (Diesel) [ ] Clamp, 1/2 Battery Cable [ ] Boot, Protective (Red) [ ] Boot, Protective (Black) [ ] Battery (Gas & LP) [ ] Battery (Diesel)

98 98 ENGINE COVER REF REF 5 29

99 09-5 ENGINE COVER Flat Washer X.375 X Latch Key Engine Cover Weldt Center Support Weldment Handle Cover Latch Bracket, Engine Cover Bolt, 1/4-20 X 1.5, Screw, Hex Head Bolt, Hex Head, 3/8-16 X 1 1/4 SS Bolt-Hex Head, Finished, 1/4-20x3/4 LG Flat Washer,.687 X.344 X Washer,Lock,1/4 Helical Spring Nut, Fiber Insert 1/ Nut, Hex, Insert Fiber, 5/ Nut-#10-24 Elastic Stop Nut /16-18 X 7/8 LG Hex Head Screw Lock Washer, 5/16 H.S. Med Washer,.625 X.281 X Screw, #10-24 X.63 Bhs Nut, Hex, Stop, 3/ Edging-Brush Drive Support Gasket Engine Cover Seal Grip, Cover Latch Pin-Striker Spring, Handle Return Engine Cover Stop Edging Latch, Slam

100 100 FUEL TANK - GAS FROM MACHINE HARNESS TO (FLOAT, FUEL LEVEL). SEE CONNECTION DIAGRAM GROUND WIRE FROM MACHINE HARNESS

101 09-5 FUEL TANK - GAS Gasoline Tank Weldment Clamp, Fuel Pump * Fuel Pump * Fuel Temp Manifold * Fitting, -6 SAE x 5/16 Quick Connect * Fitting, -3 SAE x 5/16 Quick Connect * Fuel Filter Hose, Low Permeation Fuel Line Hose, Low Permeation Fuel Line Hose, Low Permeation Fuel Line Hose, Low Permeation Fuel Line Hose, Low Permeation Fuel Line Rubber Grommet Carriage Bolt, 1/4-20 x Washer,,625 x.281 x Nut, 1/4-20 Fiber Insert Carriage Bolt, 1/4-20 x 3/ Nut, M4 Distorted Thread Nut, M5 Distorted Thread Float, Fuel Level Fuel Cap Cover (Weldment) Bracket, Clamp Bracket, Clamp Lock Washer, 1/4 Helical Spring Bolt, 1/4-20 x 3/4 LG Fin. Hex Head Clamp * Fitting, Fuel Pump Wsh, Int SHPRF # Scr-Pan Phil x.50 * = Included with engine See Spare Parts and Engine Service Parts pages for additional engine replacement parts.

102 102 GM 3.0 LITER - GAS ENGINE (AIR FILTRATION SYSTEM) 09-5

103 09-5 GM 3.0 LITER - GAS ENGINE (AIR FILTRATION SYSTEM) Engine, GM 3.0 GAS (IMPCO) Engine-PSI, GM 3.0L GAS (PSI) Bracket, Air Cleaner Clamp, Air Cleaner Filter Assy., Air Cleaner Cap Screw, 3/8-16 x 1.25 NOTE Cap Screw, 3/8-16 x 2.0 NOTE Screw, 5/16-18 x 3/4 HHC Flat Washer,.687 x.344 x Nut, 5/16-18 Fiber Insert Hex Hose, Air Intake Tube Weldment Hose, Air Intake Plug, 1/8 NPT Clamp, Hose Clamp, Hose Filter Service Indicator NOTE 1: Included with engine See Spare Parts and Engine Service Parts pages for additional engine replacement parts.

104 104 GM 3.0 LITER - LP ENGINE (AIR FILTRATION SYSTEM) IMPCO

105 09-5 GM 3.0 LITER - LP ENGINE (AIR FILTRATION SYSTEM) IMPCO Engine, GM 3.0 LP (IMPCO) Bracket, Air Cleaner Clamp, Air Cleaner Filter Assy., Air Cleaner Cap Screw, 3/8-16 x 1.25 NOTE Cap Screw, 3/8-16 x 2.0 NOTE Screw, 5/16-18 x 3/4 HHC Flat Washer,.687 x.344 x Nut, 5/16-18 Fiber Insert Hex Hose, Air Intake Tube Weldment Hose, Air Intake Hose, Air Intake Plug, 1/8 NPT Clamp, Hose Clamp, Hose Fitting, 1/4 NPT x 1/8 NPT x 3/8 JIC Tee Switch, Low Pressure Hose, LP High Pressure (64 ) Filter Service Indicator Fitting, 1/4 NPT Street Elbow, 90, Brass NOTE 1: Included with engine See Spare Parts and Engine Service Parts pages for additional engine replacement parts.

106 106 GM 3.0 LITER - LP ENGINE (AIR FILTRATION SYSTEM) PSI

107 09-5 GM 3.0 LITER - LP ENGINE (AIR FILTRATION SYSTEM) PSI Engine-PSI, GM 3.0L LP (PSI) Switch, Low Pressure Filter Service Indicator Fitting, 1/4 NPT x 1/8 NPT x 3/8 JIC Tee Bracket, Air Cleaner Clamp, Air Cleaner Filter Assy., Air Cleaner Flat Washer,.687 x.344 x Clamp, Hose Hose, Air Intake Nut, 5/16-18 Fiber Insert Hex Screw, 5/16-18 x 3/4 HHC Cap Screw, 3/8-16 x 1.25 NOTE Cap Screw, 3/8-16 x 2.0 NOTE Hose, LP High Pressure (64 ) NOTE 1: Included with engine See Spare Parts and Engine Service Parts pages for additional engine replacement parts.

108 108 GM 3.0 LITER - GAS & LP ENGINES (SUPPORTS, BRACKETS)

109 09-5 GM 3.0 LITER - GAS & LP ENGINES (SUPPORTS, BRACKETS) Engine, GM 3.0 LP (IMPCO) Engine, GM 3.0 GAS (IMPCO) Engine-PSI, GM 3.0L LP (PSI) Engine-PSI, GM 3.0L GAS (PSI) Bracket, Engine Mount NOTE Bracket, Engine Mount Bracket, Engine Mount Washer, 25/64 ID x 3/4 OD Lock Washer, 3/8 Helical Spring Bolt, 3/8-16 x 1.25 Fin. Hex Head Bolt, 3/8-16 x 1.25 Hex Head Screw, 3/8-16 x 1.50 HHC Support, Engine Support, Engine Nut, 3/8-16 Hex Stop Isolator, Engine Mount (Red Dot) Washer Flat Washer, x.531 x Screw, 1/2-13 x 3.5 SS Spacer, Snubbing Washer Nut, 1/2-13 Elastic Lock Edging, Brush Drive Support Bracket, Engine Mount NOTE 2 NOTE 1: Used on machines up to Serial No NOTE 2: Used on machines Serial No and above.

110 110 GM 3.0 LITER - GAS & LP ENGINES [EXHAUST SYSTEM]

111 09-5 GM 3.0 LITER - GAS & LP ENGINES [EXHAUST SYSTEM] Engine, GM 3.0 LP (IMPCO) Engine, GM 3.0 GAS (IMPCO) Engine-PSI, GM 3.0L LP (PSI) Engine-PSI, GM 3.0L GAS (PSI) Gasket, Exhaust Flange NOTE Exhaust Downpipe Gasket, Exhaust Flange NOTE Muffler, Catalyst (Gas & LPG) (IMPCO engines only) NOTE Converter-Catalytic (Gas & LPG) (PSI engines only) NOTE 1 (TSBUS ) Hanger, Muffler Exhaust Tailpipe O2 Sensor, GM 3.0 NOTE Flat Washer,.687 x.344 x Lock Washer, 5/ Screw, M8 x 1.25 x 25mm HHC Washer, 25/64 ID x 3/4 OD Bolt, 3/8-16 x 1.25 Hex Head Lock Washer, 3/8 Helical Spring Nut, 3/8-16 Hex Washer,,625 x.281 x Bolt, 1/4-20 Fin. Hex Head Nut, 1/4-20 Fiber Insert NOTE 1: Shipped with the engine. See Spare Parts and Engine Service Parts pages for additional engine replacement parts.

112 112 GM 3.0 LITER - GAS & LP ENGINES (FAN, RADIATOR HOSES)

113 09-5 GM 3.0 LITER - GAS & LP ENGINES (FAN, RADIATOR HOSES) Engine, GM 3.0 LP (IMPCO) Engine, GM 3.0 GAS (IMPCO) Engine-PSI, GM 3.0L LP (PSI) Engine-PSI, GM 3.0L GAS (PSI) Hose, Upper Radiator Hose, Lower Radiator Clamp, Hose Clamp, Hose Spacer, Fan Fan, 18 5-Blade Sickle Lock Washer, 5/ Screw, 5/16-24 x 2.25 Hex Head Lock Washer, 3/8 Int./Ext. Tooth Bolt, 3/8-16 x 1.25 Fin. Hex Head Connector, O-Ring Hose Assy Plug, Hex 37 Flared

114 FUEL TANK ASSEMBLY - LP SEAT BRACKET LOW FUEL INDICATOR LIGHT INSTRUMENT PANEL ATTACH TO FITTING FROM ASSEMBLY # SEAT PEDESTAL

115 09-5 FUEL TANK ASSEMBLY - LP Coupling (Woodward N ) Fitting, 1/4 NPT x 1/4 FM 45 (Woodward N2-1106) NOTE Elbow, 45 Male 45 Flared Hose, 5/16 ID x 44, #6 UL (Woodward 44 N8-3001) Fitting, 1/4 NPT x 3/8 SAE 90 (Woodward N2-1107) NOTE Hose, 5/16 ID x 64, #6 UL (Woodward 64 N8-3001) Vent 1/4 NPT (Woodward N ) NOTE Fitting, Bulkhead (Woodward N3-0037) NOTE Weldt, LP Collar Lock Screw, 1/4-20 x.625 HHC Lock Washer, 1/4 Helical Spring LP Tank /8-16 x 1.0 LG Nut, 3/8-16 Fiber Insert Washer,.625 x.281 x Pad Lock Washer, 3/8 Helical Spring Light, Low LP Indicator 24 REF Fitting NOTE Guard, LP Tank Rubber Grommet See Spare Parts and Engine Service Parts pages for additional engine replacement parts. NOTE 1: Contained in LP Kit NOTE 2: Comes with LP tank.

116 116 MITSUBISHI S4Q2 TIER 2 - DIESEL ENGINE (FAN, EXHAUST, HOSES)

117 09-5 MITSUBISHI S4Q2 TIER 2 - DIESEL ENGINE (FAN, EXHAUST, HOSES) Engine Assy., Mitsubishi S4Q2 Diesel Hanger, Muffler Hose, Lower Radiator Clamp Hose, Upper Radiator Tube, Exhaust Downpipe Muffler Tailpipe Clamp, 1/4 Muffler Spacer, S4Q2 Engine Fan Fan, 18 5-Blade Sickle Lock Washer, 5/ Carriage Bolt, x Lock Washer, 1/4 Helical Spring Nut, 1/4-20 Hex Nut, M8 x Screw, M8 x 1.25 x 55mm HHC Sleeve, Insulating Clamp Muffler 1 5/8 See Spare Parts and Engine Service Parts pages for additional engine replacement parts.

118 118 MITSUBISHI S4Q2 TIER 2 - DIESEL ENGINE (SUPPORTS, THROTTLE)

119 09-5 MITSUBISHI S4Q2 TIER 2 - DIESEL ENGINE (SUPPORTS, THROTTLE) Support, Engine Isolator, Engine Mount (Red Dot) Spacer, Snubbing Washer Bracket, Engine Rear Bracket, Engine Mount Bracket, Engine Mount Lock Washer, 3/8 Helical Spring Bolt, 3/8-16 x 1.25 LG Fin. Hex Head Screw, 1/2-20 x 3.50 LG HHC Nut, 1/2-20 Fiber Insert Flat Washer, 1.00 x.39 x Lock Washer, 1/ Nut, 3/8-16 Hex Support, Engine Arm, Throttle Bracket, Forward/Reverse Cable Washer, 25/64 ID x 3/4 OD Plain Screw, M12 x 1.75 x 40mm HHC Screw, M12 x 1.75 x 25mm HHC Lock Washer, M10 Helical Spring Screw, M10 x 1.25 x 20mm HHC Coupling, Engine Screw, M8 x 1.25 x 15mm 8.8 Blox Casting, Pump Plate Screw, M10 x 1.25 x 30mm HHC Wire, Ground to Frame Bolt, 3/8-16 Fin. Hex Head Lock Washer, 3/8 Int./Ext. Tooth Clamp, Conduit Lock Washer, #10 Ext Flat Washer,.500 x.219 x Nut, #10-24 Elastic Stop Cable, Throttle (80 ) Connector, Ball Joint Nut, Nut, 1/4-28 Fiber Insert Lock Washer, 1/4 Helical Spring Screw, M6 x1.0 x 20mm HHC Edging, Brush Drive Support Screw, 8-32 BHC Washer See Spare Parts and Engine Service Parts pages for additional engine replacement parts.

120 120 MITSUBISHI S4Q2 TIER 2 - DIESEL ENGINE [FUEL SYSTEM]

121 09-5 MITSUBISHI S4Q2 TIER 2 - DIESEL ENGINE [FUEL SYSTEM] Flat Washer, 1.00 x.39 x Bracket, Fuel Filter Kit Fuel Filter Asm NOTE /16 Lock Washer Screw, M8 x 1.25 x 40mm Bolt, 3/8-16 x 1.25 Hex Head Washer, 25/64 ID x 3/4 OD Nut, 3/8-16 Hex Stop Insert, 1/4-20 Threaded * Pump, Fuel Lock Washer, 1/4 Helical Spring Bolt, 1/4-20 x.75 Fin. Hex Head * Hose Barb, 1/8 NPT x 5/16 90 Elbow Hose, Fuel (22 ) Clamp, Hose Flat Washer,.625 x.281 x Cap Screw, 1/4-20 x 1.25 Hex Head Nut, 1/4-20 Hex Bracket, Murphy Nut, 1/4-20 Fiber Insert Star Washer Relay, Murphy Screw, #10-24 x.38 RHMS Bracket, Murphy Screw, M8 x 1.25 x 20mm Lock Washer, 1/ Relay, Glow Plug * Solenoid, Starter Hose, Fuel (15 ) Bumper, Fuel Line Clamp, Cable Clamp Washer, 1/4 ID x.44 OD x Screw, 1/4-20 x.875 Hex Head Edging, Frame Fitting, 1/8 NPT x 5/16 Hose Barb Hose, 5/16 ID x 4 Fuel Screw, #10-24 x 5/ Nut, #10-24 Elastic Stop * = Comes with Engine Assembly See Spare Parts and Engine Service Parts pages for additional engine replacement parts. NOTE 1: Fuel Filter Assembly is no longer available. If you need to replace please order Fuel Filter Kit

122 122 MITSUBISHI S4Q2 TIER 2 - DIESEL ENGINE (AIR FILTRATION SYSTEM) /2-06

123 09-5 MITSUBISHI S4Q2 TIER 2 - DIESEL ENGINE (AIR FILTRATION SYSTEM) Bracket, Air Cleaner Band, Air Cleaner Assy Filter Assy., Air Cleaner Hose, Air Intake Lock Washer, M10 Helical Spring Screw, M10 x 1.25 x 20mm HHC Flat Washer,.687 x.344 x Nut, 5/16-18 Fiber Insert Hex Screw, 5/16-18 x 1.25 Hex Head Clamp, Hose Clamp, Hose Fitting, 1/8 NPT Nipple Filter Service Indicator See Spare Parts and Engine Service Parts pages for additional engine replacement parts.

124 124 MITSUBISHI S4Q2 TIER 4 - DIESEL ENGINE [FAN, EXHAUST, HOSES] REF

125 MITSUBISHI S4Q2 TIER 4 - DIESEL ENGINE [FAN, EXHAUST, HOSES] Fan, 18 5-Blade Sickle [ ] Anti-Freeze, 50/ /16 Lock Washer Bolt, Carriage Clamp Clamp, Muffler Clamp, Muffler Engine Assy, Mitsubishi S4Q2 T Hanger-Muffler HHC, M8 X 1.25 X 55mm Hose, Radiator Lower Hose, Radiator Upper Muffler Nut, Hex, Insert Fiber, 5/ Nut, M8 X Spacer, Fan Mitsubishi S4Q Tail Pipe Tube, Exhaust Downpipe Flat Washer,.687 x.344 x.062 [ ] = Not Shown NOTE 1: Tier 4 Diesel was implemented as of serial number

126 126 MITSUBISHI S4Q2 TIER 4 - DIESEL ENGINE [SUPPORTS, THROTTLE] REF REF REF REF REF

127 MITSUBISHI S4Q2 TIER 4 - DIESEL ENGINE [SUPPORTS, THROTTLE] Scr, Soc Hd M6-1.0 X Wsh, Flt SS 6mm Arm Engine Throttle Nut Ball Joint Connector Bolt-Hex Head, Finished, 3/ Bolt-Hex Head, Finished, 3/8-16 X 1.25 LG Bracket, Engine Mount Bracket, Engine Mount Bracket, S4Q2 Engine, Rear Conduit Clamp Edging-Brush Drive Support Flat Washer, 1.00 X.39 X HHC, M10 X 1.25 X 20mm HHC, M12 X 1.75 X 25mm Isolator, Engine Mount (Red Dot) Lock Washer, #10 Ext Lock Washer, 3/8 Int./Ext. Tooth M10 Helical Spring Lw Nut 1/2-20 Fiber Insert Nut, Fiber Insert 1/ Nut, Hex, 3/ Nut-#10-24 Elastic Stop Nut Screw, 1/2-20 X 3.50 LG, HHC Screw, 8-32 BHC Spacer, Snubbing Washer Support, Engine Support, Engine Washer Washer, 1/2 Lock Washer-Flat.500 X.219 X Washer-Lock, 3/8, Helical Spring Washer-Plain, 25/64 ID X 3/4 OD Wire, Ground To Frame NOTE 1: Tier 4 Diesel was implemented as of serial number

128 128 MITSUBISHI S4Q2 TIER 4 - DIESEL ENGINE [FUEL SYSTEM] ROUTE TO FUEL TANK FRONT PORT BOTTOM REF REF TUBE # FROM FUEL TANK ASSEMBLY REF INCLUDED WITH ENGINE REF INCLUDED WITH ENGINE

129 MITSUBISHI S4Q2 TIER 4 - DIESEL ENGINE [FUEL SYSTEM] Wsh, Flt STD 5/ Scr, Hex M X 16mm Hose, Fuel Line 1/4 ID X 48 LG Screw, #10-24 X 5/8 LG Clamp Nutsert, 1/ Hose Fuel 15 LG /4-20 X 0.875, Hex Head Screw Bolt-Hex Head, Finished, 1/4-20 x 3/4 LG Bracket, Murphy Cable Clamp Clamp, Hose Edging, Hose Fitting, 1/8 NPT X 5/16 Hose Barb Hose Hose - Fuel 22 LG Hose, 5/16 ID Fuel Hose X 4 Long Nut, Fiber Insert 1/ Nut, Hex 1/ Nut-#10-24 Elastic Stop Nut Screw - #10-24 X.38 Rhms Screw-Cap, Hex Head, X Washer.25 ID X.44 OD X Washer,.625 X.281 X Washer, Star Washer, Lock, 1/4 Helical Spring Clamp- Hose SAE #4 NOTE 1: Tier 4 Diesel was implemented as of serial number

130 130 MITSUBISHI S4Q2 TIER 4 - DIESEL ENGINE [AIR FILTRATION SYSTEM] REF INCLUDED WITH ENGINE

131 MITSUBISHI S4Q2 TIER 4 - DIESEL ENGINE [AIR FILTRATION SYSTEM] Screw, Hex Head 5/16-18 X Bolt-Hex Head, Finished, 1/4-20 x 3/4 LG Bracket, S4Q2 Air Filter Clamp, Hose Filter, Air Cleaner Assy Filter, Band Filter, Service Indicator 20 WC Fitting, 1/8 NPT Nipple Flat Washer,.687 X.344 X HHC, M10 X 1.25 X 20mm Hose Clamp Hose, S4Q2 Air Intake M10 Helical Spring LW Nut, Fiber Insert 1/ Nut, Hex, Insert Fiber, 5/ Washer.25 ID X.44 OD X.046 NOTE 1: Tier 4 Diesel was implemented as of serial number

132 132 FUEL TANK - DIESEL

133 09-5 FUEL TANK - DIESEL Wsh, Flt SAE 1/ Scr, Pan Phil X Scr, Hex 1/4-20 X Nut, Hex Nyl Loc 1/ Wsh, Int Shprf # Wsh, Int Shprf 1/ Fitting Cap Gasket, Sending Unit Fitting Fuel Tank Cover, Weldment Bracket, Clamp Bracket, Clamp Fitting 5/16 Tube X 1/8 NPT Float, Fuel Level

134 134 RADIATOR ASSEMBLY

135 RADIATOR ASSEMBLY Radiator Bracket, Oil Cooler Flat Washer,.687 x.344 x Screw, M8 x 1.25 x 15mm HHC Oil Cooler Carriage Bolt Nut, 5/16-18 Fiber Insert Hex Isolator, Engine Mount (Red Dot) Washer Spacer, Snubbing Washer Flat Washer, x.531 x Lock Washer, 1/ Screw, 1/2-13 x Overflow Bottle Assy. (1 liter) Hose, 1/4 ID x 20, Black Clamp, Cable Clamp, Hose Hose, 1/4 ID x 28, Clear Lock Washer, 5/ Bracket, Radiator Support Plug, Radiator Outlet (Gasoline/LPG) Plug, Radiator Outlet (Diesel) Clamp Constant Tension Fitting, Straight -8 ORS x -12 SAE Fan Washer Isolator, 32 x 32, M8-1.25

136 136 DECALS

137 09-5 DECALS Decal, Caution Decal, Tie Down Decal, LPG (LPG only) Decal, Warning Hydraulic Decal, Warning Broom Decal, Warning Fan Decal, Warning Tip Over Decal, Warning Hopper Decal, Coolant Level Decal, Warning Hot Decal, Caution Decal, Hands Clear Decal, Unleaded Fuel (Petrol only) Decal, Low Sulfur Diesel (Diesel only) Decal, No Step Bi-directional Pedal Front Instrument Panel Top Instrument Panel Left Side Control Panel Side Broom-Pull to Raise Decal-Advance Decal, Pad (foot pedal) Pad (edge)

138 138 STEERING & INSTRUMENT PANEL

139 09-5 STEERING & INSTRUMENT PANEL Wsh, Flt SAE # Scr, Pan Phil X Wsh, Flt SAE 3/ Nut, Hex Nyl Loc SS 1/ Scr Hex Ss 1/4-20 X Wsh, Flt SAE SS 1/ Scr,Hex Hd Loc 3/8-16x Scr, Hex Thd Form 1/4-20 X Scr, Hex Thd Form 1/4-20 X Blank Panel Housing, Console Weldment Cover-Panel Housing, Steering Weldment Bracket-Console Support Screw #10-16x1/2 Self Tapping Washer, Sealing Screw- 1/4-20 X.50 Bhcs W/ Nylok Steering Column Assy Steering Wheel Cap Steering Wheel Panel-Circuit Breaker Mount Instrument Panel Steering Unit * Seal Kit

140 140 INSTRUMENT PANEL CONNECTIONS SIDE BROOM SWITCH 15 7 MAIN BROOM SWITCH SQUEEGEE DECK SWITCH 28 SHAKER MOTOR SWITCH BRUSH DECK SWITCH 17 REC. HIGH LIGHT SOL. LOW LIGHT GLOW PLUG SWITCH 2 SCRUB 31 ROTATION 6 SWITCH SCRUB PRESSURE SWITCH REF

141 09-5 INSTRUMENT PANEL CONNECTIONS ^ Wsh, Flt SAE #10 2^ Scr, Pan Phil X.50 3^ Nut, Hex Nyl Loc-Thin ^ Meter-Hour 5^ Bracket Relay 6^ Switch SPST On/Off L 7^ Switch SPST On/On 8^ Decal, Control Top Control Panel 9^ Decal, Control Front Inst Panel 10^ Relay-12 VDC 13^ Weldment-Instrument Panel 14^ Panel-Circuit Breaker Mount 15< Light-Blank 16^ Plug.50 Dia 17^ Light-(14v) Red 18^ Switch, Key - Anti Re-Start 19^ Boot 20^ Voltmeter 21^ Gauge, Oil Pressure 22^ Gauge, Water Temperature Gauge, Fuel (Gasoline and Diesel only) 24^ Circuit Breaker- 15 Amp 25^ Relay-Shaker Motor 26^ Horn, Push Button 27^ Harness Instrument Panel 28^ Harness Circuit Breaker 29^ Wire-Wing Kit, Low LP Indicator (LPG only) Switch, SPST ON-OFF ^ = Used on all models < = Used on MD models

142 142 SPARE PARTS - GAS & LP SPARE PARTS GAS & LP [VARIABLE DUMP] BROOM & HOPPER COMPONENTS Flap, Broom Chamber Front Flap - Broom Chamber Flap - Broom Chamber Rear Sides Flap - Broom Door Gasket - Broom Door Flap - Hopper Lip Seal Outer Door SQUEEGEE COMPONENTS Kit, Rear Skirt, Squeegee Kit, Side Skirt, Squeegee FILTERS Hydraulic Return Filter Element Hopper Panel Filter Engine Air Filter (Safety) Engine Air Filter (Main) ENGINE-RELATED COMPONENTS GM 3.0L Gas/LP Engine Oil Filter Fuel Filter (Gasoline) Lock, Safety Valve Connector NOTE Filter, Propane NOTE Valve-Fuel Lockoff (Propane) NOTE Filter (Propane) NOTE Belt, Water Pump & Alternator A/R Seal, Front Crankshaft SPARE PARTS - GAS & LP [MANUAL DUMP] MACHINES BROOM & HOPPER COMPONENTS Flap, Broom Chamber Front Flap, Broom Chamber Upper Flap, Hopper Lip SQUEEGEE COMPONENTS Kit, Rear Skirt, Squeegee Kit, Side Skirt, Squeegee FILTERS Hydraulic Return Filter Element Engine Air Filter (Safety) Engine Air Filter (Main) ENGINE-RELATED COMPONENTS GM 3.0L Gas/LP Engine Oil Filter Fuel Filter (Gasoline) Lock, Safety Valve Connector NOTE Filter, Propane NOTE Valve-Fuel Lockoff (Propane) NOTE Filter (Propane) NOTE Belt, Water Pump & Alternator A/R Seal, Front Crankshaft NOTE 1: Used on machines up to Serial No NOTE 2: Used on machines Serial No and above.

143 SPARE PARTS - DIESEL [VARIABLE DUMP] 143 BROOM & HOPPER COMPONENTS Flap - Broom Chamber Front Flap - Broom Chamber Flap - Broom Chamber Rear Sides Flap - Broom Door Gasket - Broom Door Flap - Hooper Lip Seal - Outer Door SQUEEGEE COMPONENTS Kit, Rear Skirt, Squeegee Kit, Side Skirt, Squeegee FILTERS Engine Air Filter (Safety) NOTE Engine Air Filter (Main) NOTE Hydraulic Return Filter Element Hopper Panel Filter ENGINE-RELATED COMPONENTS Mitsubishi S4Q2 Diesel Engine Oil Filter Element Fuel Filter S4Q2/S4L2 NOTE Fuel Filter Element NOTE Belt, Alternator/Fan Solenoid & Linkage, Shut Down A/R Ring Set, Piston A/R Bushing, Con-Rod NOTE 1: Both filters should be changed at the same time NOTE 2: Only used on obsolete Tier 2 Fuel Filter Assembly NOTE 3: Only used on Fuel Filter Assembly and Fuel Filter Kit which replaces obsolete Tier 2 Fuel Filter Assembly

144 144 SPARE PARTS - DIESEL [MANUAL DUMP] BROOM & HOPPER COMPONENTS Flap, Broom Chamber Front Flap, Broom Chamber Upper Flap, Hopper Lip REAR SQUEEGEE COMPONENTS Kit, Rear Skirt, Squeegee Kit, Side Skirt, Squeegee FILTERS Engine Air Filter (Safety) NOTE Engine Air Filter (Main) NOTE Hydraulic Return Filter Element ENGINE-RELATED COMPONENTS Mitsubishi S4Q2 Diesel Engine Oil Filter Element Fuel Filter S4Q2/S4L2 NOTE Fuel Filter Element NOTE Belt, Fan/Alternator Solenoid & Linkage, Shut Down A/R Ring Set, Piston A/R Bushing, Con-Rod NOTE 1: Both filters should be changed at the same time NOTE 2: Only used on obsolete Tier 2 Fuel Filter Assembly NOTE 3: Only used on Fuel Filter Assembly and Fuel Filter Kit which replaces obsolete Tier 2 Fuel Filter Assembly

145 09-5 ENGINE SERVICE PARTS - MITSUBISHI S4Q2 DIESEL TIER Alternator Fan, S4Q2 Engine Belt, Alternator/Fan Water Pump Gasket, Water Pump Oil Filter Glow Plug Relay, Glow Plug (installed on wire harness) Relay, Murphy (installed on wire harness) Injector Pipe, Cylinder # Pipe, Cylinder # Pipe, Cylinder # Pipe, Cylinder # Pipe, Fuel Leak-Off Gasket, Thermostat Thermostat Starter Gasket, Cylinder Head Solenoid & Linkage, Shut Down Element Fuel Filter S4Q2/S4L2 NOTE Fuel Filter Element NOTE Switch, Water Temperature Switch, Oil Pressure (for Murphy Shutdown) Manifold, Exhaust S4Q Gasket, Manifold to Head Gasket, Manifold to Pipe Pump-Oil Feed-Mitsu-S4Q2 TIER Fuel Filter Element Bracket Throtle Cable Mtg Pipe Cylinder 1 S4Q2 T Pipe Cylinder 2 S4Q2 T Pipe Cylinder 3 S4Q2 T Pipe Cylinder 4 S4Q2 T Pipe Return Fuel Belt, Waterpump/Alternator Mitsu S4Q Filter, Oil Mitsubishi S4Q Pipe, Balance Mitsubishi S4Q Pump, Water Mitsubishi S4Q Glow Plug, Mitsubishi S4Q Injector, Mitsubishi S4Q Starter, Mitsubishi S4Q Alternator, Mitsubishi S4Q Gasket, Thermostat Mitsubishi S4Q Thermostat, Mitsubishi S4Q Sender-Water Temp NOTE 1: Only used on obsolete Tier 2 Fuel Filter Assembly NOTE 2: Only used on Fuel Filter Assembly and Fuel Filter Kit which replaces obsolete Tier 2 Fuel Filter Assembly NOTE 3: Tier 4 Diesel was implemented as of serial number

146 146 ENGINE SERVICE PARTS - GM 3.0 GAS-LP IMPCO ECU, 2006 LP Cert 3.0L NOTE ECU, 2007 LP Cert 3.0L NOTE ECU, 2006 Gas Cert 3.0L NOTE ECU, 2007 Gas Certified 3.0L NOTE Harness, 3.0L LP Harness, 3.0L Gas Harness, Engine To Machine Interface Harness, Fuel Temp Extension Sensor, Coolant Sensor, Crankshaft Position Sensor, TMAP Sensor, O2 Pre Cat Switch, Oil Pressure Sender, Water Temp Sender, Oil Pressure Water Pump Oil Pump Gasket, Cylinder Head A/R Bolt Head Gasket, Valve Cover Gasket, Lifter Cover Gasket, Intake Manifold Plate, Drive, SAE 13T B-B Bolt, Drive Plate Distributor Assembly (Complete) Distributor Cap Distributor Rotor Ignition Module Ignition Coil Coil Wire Spark Plug Wire Set Spark Plug Oil Filter PCV Valve Starter Bolt, Starter Alternator Belt, Water Pump & Alternator Thermostat, Gasket, Thermostat Gasket, Thermostat Housing Outlet-Water 3.0L GM Bracket-EPR Mounting (LPG) Fitting-2 in. Pipe Nipple (LPG) Pulley-Water Pump GM 3L NOTE 1: Use ECU for 2006 engine (P/N: ). Use ECU for 2007 engine (P/N: ). NOTE 2: Use ECU for 2006 engine (P/N: ). Use ECU for 2007 engine (P/N: ).

147 09-5 ENGINE SERVICE PARTS - GM 3.0 GAS-LP IMPCO [CONTINUED] A/R Engine-Long Block Assy 3.0L Throttle Body, Bosch 40mm Gasket, Bosch Throttle Body Mixer, IMPCO Model Gasket, Adapter Mixer Adapter, Mixer - Throttle Body Seal, Mixer Adapter O-Ring, Mixer Adapter Electronic Pressure Regulator Sender, LPG Temp - EPR Fitting Kit - EPR Isolator, EPR Hose, Water - EPR Valve, LP Safety Connector, Safety Valve Lock, Safety Valve Connector NOTE Filter, Propane NOTE Valve-Fuel Lockoff (Propane) NOTE Filter (Propane) NOTE Fuel Rail Assembly Fuel Injector Intake Manifold, GM 3.0L Exhaust Manifold, GM 3.0L A/R Seal, Front Crankshaft Engine Service Kit Hose, Breather Cap Cap, Oil Fill NOTE 3: Used on machines up to Serial No NOTE 4: Used on machines Serial No and above.

148 148 ENGINE SERVICE PARTS - GM 3.0 GAS-LP PSI Engine 3.0L GM (PSI) * Harness: Engine - Machine Patch * Sensor, Coolant * Sensor, Crankshaft Position * Sensor, Tmap * Sensor-O2 * Sender-3.0l Oil Pressure * Sender, Water Temp * Sender, Oil Pressure * Water Pump * Oil Pump * Gasket, Valve Cover * Gasket, Lifter Cover * Gasket, Intake Manifold * Plate, Drive, SAE 13t B-B * Bolt, Drive Plate * Distributor Assembly * Distributor Cap * Distributor Rotor * Ignition Module * Ignition Coil * Coil Wire * Spark Plug Wire Set * Spark Plug * Oil Filter * Valve-Pcv * Starter * Bolt, Starter * Alternator, 7si * Belt, Alternator * Thermostat, 180 F * Gasket, Thermostat * Gasket, Thermostat Housing * Gasket, Throttle Body * Outlet-Water 3.0L GM * A/R Bolt Head * Pulley-Water Pump GM 3L * A/R Engine Service Kit * = Optional, Not Included

149 09-5 ENGINE SERVICE PARTS - GM 3.0 GAS-LP PSI [CONTINUED] Engine 3.0L GM (PSI) GAS/PETROL ONLY * Harness-Main 3.0l Gm Gas * Throttle Body, Bosch 40mm * Fuel Rail Assembly * Fuel Injector * Ecu-PSI 3.0L Gas * Harness, Fuel Temp Extension * Fuel Pump * Fitting, Fuel Pump * Fuel Filter * Manifold, Fuel Temp Return * Fitting, -6 Stor - 5/16 SAE J2044 * Fitting, -3 Stor - 5/16 SAE J2044 LPG ONLY * Harness-Main 3.0L LP * Ecu-PSI 3.0L LP * Depr-PSI 3.0L * Regulator-Dual Stage * Adapter-3.0L Mixer * Elbow-90 Deg Reducer * Hose-Intake * Body-3.0L Throttle * Mixer-PSI 3.0L LPG * Seal, Mixer Adapter * O-Ring, Mixer Adapter * Sender, LPG Temp - EPR * Fitting Kit, EPR * Isolator, EPR * Connector, Safety Valve * Lock, Safety Valve Connector * Valve-Fuel Lockoff * Cartridge-LPG Filter * Manifold-3.0L Intake * = Not Shown

150 C O N N E C T T O E N G IN E BLOCK MACHINE HARNESS ROUTING DIAGRAM GAS-LP-DIESEL SHAKER MOTOR ,26,27,21 19 RECOVERY TANK (BACK WALL) HIGH RECOVERY SWITCH FLOAT 20 FROM INSTRUM ENT PANEL HARNESS SOLUTION LOW FLOAT ,29,31,33 SEE INSTRUMENT PANEL 7 HORN SOLUTION TANK (INSIDE WALL) RECOVERY TANK ,24,25,36, ,24,36, ECP EPR 9 CO NNECTTO STARTER + Co nnects to GMLPG Engin e Harn ess GM G as Engine Harness S4Q2 Diese lengin e Harness com es w/engine Assy. 14 -P IN M etrip ack G Tco nnecto r, 2-PIN Anderso n Powerpole co n ne cto r Connects to Patch harness se e for connectio ns to M ITS U B IS H I ENGINE HARNESS DIESEL FUEL PUMP THROTTLE SW. MIL LIGHT NOTE: TAPE INDIVIDUALLY WHEN NOT USED FUEL TANK 9 5 GASOLINE FUEL PUM P Fuel m anifold D2 Co n n e cts to comes w/engin e Assy. Foot pedal prox. connectors Wires 12,55, & 46=Reverse Wires 12,56, & 46=Forward 28 NOTE: THESE (3) WIRES MUST EXIT MAIN HARNESS IN THE MIDDLE OF THE OPENING FOR LIGHT OPTIONS FOR THE REST OF THE HARNESS TO FIT ,29,31,33

151 MACHINE HARNESS ROUTING DIAGRAM GAS-LP-DIESEL Ref. Switch, Float (Solution Low) Ref. Switch, Float (Rec. High) Ref. Battery (Gas/LP Only) Ref. Battery (Diesel Only) Bushing, Connector (Liquid Tight) Boot, Protective (Red) Ref. Screw, 3/8-16 x.75 HHC Ref. Horn Ref. Cable, Battery (Negative)(Gas/LP) Ref. Cable, Battery (Negative)(Diesel) Boot, Protective (Red) Machine Harness Ref. Screw, #10-24 x.25 THMS Clamp Hose Single 1/2 O.D Ref. Cable, Battery (Positive)(Gas/LP) Ref. Cable, Battery (Positive)(Diesel) Ref. Motor, Shaker Bushing, Snap Ref. Boot, Protective (Black) Wire Assembly, Hopper (HO - WA) Terminal-Bullet Male Clamp Ref. Screw, #10-24 x.50 RHM Ty-Rap Thomas + Betts-Ty-28M Ref. Screw, #10-24 x.75 THM Ref. Lock Washer, 3/8 Int./Ext Ref. Nut, 3/8-16 Hex Lk Washer 10 Med Sec Zn Ref. Flat Washer, # Diode Assembly (D2) Screw, 1/4-20 x.75 THM Lock Washer, 1/4 ID Helical Spring Nut, 1/4-20 Hex Wire Contactor To Shunt Lock Washer, 1/4 Ext Nut Hex Mac-Scr Stl/Zn Harness, Hopper Flat Washer, 3/ Lk Wash INT/EXT Tooth ZN Grommet Harness-Power 7760 GM 3.0L Conn Wr Pk Male 2 W Conn.Wr.Pk.2 Way Fe [ ] Plug, Cavity Wp [ ] = Not Shown

152 152 HYDRAULIC SCHEMATIC - VARIABLE DUMP

153 09-5 HYDRAULIC SCHEMATIC - MANUAL DUMP 153

154 ELECTRICAL SCHEMATIC (GAS/LP/DIESEL) - 1 of CB A. TO L-SW #1 TO OPTIONS TO L-SW #2 1 BAT CB1 R A. SHAKER RELAY 1 CB2 S S1 SWITCH, IGN. ST ACC 15 A. IGN 24 CB A. CB A. CB A. HORN PUSH BUTTON BT1 BATTERY, 12 Vdc S THROTTLE SW 27 R HOUR RELAY 11 HORN 50 N-K LT N-P 11 CHECK ENGINE LIGHT(GAS,LPG) WATER TEMP GUAGE P2 I S N-F 33 OIL PRESSURE GAUGE 12 P3 I S M1 SHAKER MOTOR M - H1 1 2 R HOUR RELAY B(+) N-A N-C N-H N-G P1 B(-) HOURMETER 46 SEE SHEET GLOW PLUG SW. 2 1 S4 26 N-J LOW LPG PRESSURE LIGHT(LPG) N-M LT B- BT Ref. Battery (Gasoline, LPG) Ref. Battery (Diesel) CB Circuit Breaker 15 Amp (Shaker) CB Circuit Breaker 15 Amp (Horn) CB Circuit Breaker 15 Amp CB Circuit Breaker 15 Amp CB Circuit Breaker 15 Amp CB Circuit Breaker 15 Amp LT Light, Check Engine (Gasoline, LPG) LT Light, Low LPG Pressure (LPG) M Motor, Shaker R Relay, Shaker R Relay, Hour H Horn P Hourmeter P Gauge, Water Temperature P Gauge, Oil Pressure S Switch, Ignition S Switch, Horn Push Button S Switch, Throttle S Switch, Glow Plug

155 ELECTRICAL SCHEMATIC (GAS/LP/DIESEL) - 2 of 5 (ENGINE HARNESS) 155 GM 3.0 GAS & LPG ENGINE SYSTEM Nd-A Nd-H Nd-K IGNITION XX HOUR METER START/CRANK POWER Na-A 1a-A 1-A Na-C 2a-K 2-K Na-H 2a-S 2-S Na-K 1a-F 1-F Na-P 1a-G 1-G IGNITION THROTTLE HOUR METER START/CRANK POWER MIL Nd-F WATER TEMP SENDER Na-F WATER TEMP SENSOR REFERENCE DRAWINGS: , Nd-G OIL PRESSURE SENDER Na-G OIL PRESSURE SENDER Nd-J ZZ GLOW PLUG INPUT Na-M LOW LPG SIGNAL ENGINE SYSTEM S4Q2 DIESEL INTER FACE HARNESS GAS & LPG

156 156 ELECTRICAL SCHEMATIC (GAS/LP/DIESEL) - 3 of DRIVE PEDAL REVERSE SENSOR S R B- 7 DRIVE PEDAL VOLT METER FORWARD SENSOR P4 I G S REVERSE RELAY D2 R FORWARD RELAY 7 CB A. S7 HO-SW HELD CLOSED BY HOPPER 12 FUEL GAUGE REMOVE WIRE WHEN DUST CONTROL SWITCH INSTALLED S8 HD-SW 13 C N.O. 57 C N.O. 15 I S P5 HELD CLOSED BY HOPPER GAS ONLY S S9 SHAKER MOTOR SW 1 2 OPTION DUST CONTROL SW. S MAIN BROOM SW S SIDE BROOM SW R5 FUEL GUAGE SENDER R SHAKER RELAY L1 DUST CONTROL SOL (1) L2 MAIN BROOM SOL (2) L5 SIDE BROOM SOL (5) B- CB Circuit Breaker 15 Amp D Diode Assembly S Sensor, Drive Pedal Reverse S Sensor, Drive Pedal Forward S Switch, Hopper Open S Switch, Hopper Door Open S Switch, Shaker Motor S Switch, Dust Control (optional) S Switch, Main Broom S Switch, Side Broom P Voltmeter P Gauge, Fuel R Relay, Shaker R Relay, Reverse R Relay, Forward R Fuel Gauge Sender L1 NA 1 Solenoid, Dust Control (1) L2 NA 1 Solenoid, Main Broom (2) L5 NA 1 Solenoid, Side Broom (5)

157 ELECTRICAL SCHEMATIC (GAS/LP/DIESEL) - 4 of B CB A. 18 R4 87a FORWARD RELAY SCRUB BRUSH SW S14 RAISE LOWER 43 BRUSH PRESSURE SW S L6 L8 SCRUB BRUSH SOL. (6) SCRUB BRUSH SOL. (8) 40 L4 NORMAL ROTATION BRUSH (4) S15 2 BRUSHROTATIONSW L3 L9 REVERSE ROTATION BRUSH (3) SCRUB BRUSH LOCK UP SOL (9) 7 18 L10 SQUEEGEE LOCK UP (10) A. CB S16 SQUEEGE BLADE SW LOWER R3 87a REVERSE RELAY S SOLUTION LOW SW LT3 RED 1 2 RAISE (TRAVERSE) 30 D2 D4 LOW SOLUTION WARNING LIGHT L12 L7 SQUEEGEE FAN MOTOR SOL. (12) SQUEEGEE CYLINDER SOL. (7) H2 1 2 BACK-UP ALARM S RECOVERY HIGH SW LT4 RED 1 2 HIGH RECOVERY WARNING LIGHT 7 B- CB Circuit Breaker 15 Amp CB Circuit Breaker 15 Amp D Diode Assembly D4 NA 1 Diode Assembly H Back-up Alarm L3 NA 1 Solenoid, Normal Rotation Brush (3) L4 NA 1 Solenoid, Normal Rotation Brush (4) L6 NA 1 Solenoid, Scrub Brush (6) L7 NA 1 Solenoid, Squeegee Cylinder (7) L8 NA 1 Solenoid, Scrub Brush (8) L9 NA 1 Solenoid, Scrub Brush Lock Up (9) L10 NA 1 Solenoid, Squeegee Lock Up (10) L12 NA 1 Solenoid, Squeegee Fan Motor (12) LT Light, Low Solution Warning LT Light, High Recovery Warning R Relay, Reverse R Relay, Forward S Switch, Brush Pressure S Switch, Scrub Brush S Switch, Brush Rotation S Switch, Squeegee Blade S Switch, Solution Low S Switch, Recovery High

158 158 ELECTRICAL SCHEMATIC (ESP RECYCLING OPTION) - 5 of INSTRUMENT PANEL HARNESS FROM WIRE #19 AT CONNECTOR Q-e FROM WIRE #44 AT CONNECTOR Y-a FROM WIRE #41 AT RECOVERY TANK FULL LIGHT ESP RECYCLING OPTION B- S ESP-SW 1 4 K1 9 F M2 ESP PUMP 4 K1 K 4A M C C K F 9B 9A S21 LS-DMP 1 2 7A S22 DL-SW 1 2 K D K1 D 7 1A 2 R1 1 8 K1 K 8A E E RHEOSTAT SWITCH K K1 1 A A + M3 M LT5 1 2 DETERGENT PUMP - DETERGENT LOW LIGHT 10 S23 SH-SW 9A 1 2 2A B K K1 B 2 LT6 1 2 SOLUTION HIGH LIGHT B- LT Light, Detergent Low LT Light, Solution High M Pump, ESP M Pump, Detergent R Switch, Rheostat S Switch, ESP S Switch, LS-DMP S Switch, Detergent Low S Switch, Solution High

159 09-5 OPTIONS Factory Installed Options * Back Up Alarm * 1 ESP Option (OBSOLETE) * Seat Belt * Fire Extinguisher * Overhead Guard * Spray & Vac Wand * Squeegee Wand * Suspension seat with RH Arm Rest * Stainless Steel VD Hopper (in lieu of Standard) * Gal Solution & Recovery tanks (Manual Dump models only in lieu of standard) * Auxillary LP Tank Mount w/o Tank * Dual Feed LP Tanks (w/o auxillary tank) * Extended 4 corner roller bumpers * 1 Bumper Frame Wrap Around (poly) (OBSOLETE) * 1 Curb Broom Light (OBSOLETE) * 1 Rotating Light Option (OBSOLETE) * Flashing Light Option * Rotating Light Option (for overhead guard) * Flashing Light Option (for overhead guard) * Head, Tail and Instrument Lights * Head, Tail, Instrument and Brake Lights * 1 Head, Tail, Instrument, Brake Lights, Turn Signals and 4-Way Flashers (OBSOLETE) * Recovery Tank Debris Basket * Wet Sweep Bypass (not available on manual dump) * High Torque Drive Wheel Motor (in lieu of standard) * Timed filter shaker * Clogged filter indicator * Hopper High Temp Shutdown * Solution Off in Neutral * Urethane Front Tires * Tire, Rear Wheel Non Marking * Directional Rear Wheel Kit * Tire, Rear Wheel (Hvy Duty Option) * Tire, Rear Wheel (Directional) TSBUS * = Optional, Not Included

160 160 OVERHEAD GUARD OPTION 09-5

161 09-5 OVERHEAD GUARD OPTION Overhead Guard Option Guard (Weldment) Support (Weldment) Support-(Weldment) Screw, 1/2-13 x HHC Nut, Hex 1/2-13 x.875 x Lock Washer, Helical Spring 1/2 Med Flat Washer,.750 x.520 x Screw, 1/2-13 x HHC

162 162 SIDE BROOM OPTION - MANUAL DUMP B A A B CONTROL BLOCK 30 C0360/

163 09-5 SIDE BROOM OPTION - MANUAL DUMP Clamp Screw, x Lock Washer, Nut, Hex Edging Cable Nut, Hex 5/ Lock Washer, Helical Spring 5/ Cable Bracket Collar, 3/4 ID w/setscrew Bushing, 3/8-16 Thd Lift Cable Strap Bracket Side Broom Flat Washer, 5/ Side Broom Arm Side Broom Bracket Screw, 5/16-18 x 1.0 HSFHC Hydraulic Broom Drive Motor, w/key Adapter Flange Side Broom Flat Washer 1.25 x Lock Washer, 1/ Screw, 1/4-28 x 2.0 HHC Screw, 5/16-18 x Lock Washer, Helical Spring 3/ Screw, 3/8-16 x.75- HHC Side Broom Label Switch Fitting Hose, ORS-4-Str. Ends Fitting Screw, 5/16-18 x 2.0 HHC Screw, 1/4-28 x.625 HHC NOTE: This factory installed option is now obsolete.

164 164 BROOM OPTIONS P4195a Proex and Wire Proex Natural Fiber and Wire Nylon Polypro Prolene Nylon, High Density Fiber and Wire, High Density Poly Prolene Nylon

165 09-5 BACK-UP ALARM OPTION Back-Up Alarm Option Nut-Ins-Fibre Zn Pl Wshr-Fl..625x.281x.063 Stl.Zn Back-Up Alarm Scr-Hex 1/4-20 x Terminal Insulator Wire Assy, Pigtail

166 166 LIGHTS OPTIONS

167 09-5 LIGHTS OPTIONS Headlights/Taillights/Brake Lights/Instrument Lights Headlights/Taillights/Instrument Lights Bracket-Headlight Right Bracket-Headlight Left Light, 12VDC, 55W Headlight (2 headlights) Screw, 1/4-20 x.500 BHS Washer 1/4 Lock Int Light Switch, Push/Pull Scw-Rhm X.50 Zn Pl ( only) Switch-Brake ( only) Washer, Flat, #10 ( only) Lockwasher ( only) Nut, Hex ( only) Nut - #10-24 Elastic Stop Nut Taillight Bracket, Rear Light Insert, 1/ Scw RHM x.50 Zn Pl [ ] Instrument Light and Lead [ ] Spade Terminal, Female [ ] Male Bullet Plug [ ] Wire [ ] Terminal [ ] = Not Shown

168 168 LIGHTS & TURN SIGNALS OPTION

169 09-5 LIGHTS & TURN SIGNALS OPTION Headlights/Taillights/Instrument Lights/Brake Lights & Turn Signals (OBSOLETE) Bracket-Headlight Right Bracket-Headlight Left Light, 12VDC, 55W Headlight (2 headlights) Screw, 1/4-20 x.500 BHS Washer 1/4 Lock Int Light Switch, Push/Pull Scw-Rhm X.50 Zn Pl Switch-Brake Washer, Flat, # Lockwasher Nut, Hex Nut - #10-24 Elastic Stop Nut Taillight Bracket, Rear Light Insert, 1/ Scw RHM x.50 Zn Pl Light, Amber Side Marker Turn Signal Switch [ ] Instrument Light and Lead [ ] Spade Terminal, Female [ ] Male Bullet Plug [ ] Wire [ ] Terminal [ ] Rubber Washer, x.187 x.125 [ ] = Not Shown

170 170 WARNING LIGHTS [WITHOUT OVERHEAD GUARD OPTION] 09-5 OBSOLETE 5 WIRING HARNESS TO BE ADDED HERE WIRING HARNESS TO BE ADDED HERE See Detail

171 09-5 WARNING LIGHTS [WITHOUT OVERHEAD GUARD OPTION] Rotating Light Option (OBSOLETE) Flashing Light Option Bolt 1/2-13 X 1-3/4 LG Flat Washer, x.531 x Nut Elastic Stop Nut Washer, 1/2 Lock Warning Light, Amber Revolving Pole, Light Harness, Warning Light Connector, 2-Way Light, Emergency, Amber

172 172 WARNING LIGHT for OVERHEAD GUARD OPTION 09-5

173 09-5 WARNING LIGHTS for OVERHEAD GUARD OPTION Rotating Light Option Scr, Hex SS 1/4-20 x Scr, Hex Thd Form X Wsh, Flt.193 X.875 X /4 Lock Washer Nut Elastic Stop Nut Screw, X 5/8 LG Clamp Warning Light, Amber Revolving Harness, Warning Light Connector, 2-Way Plate, Flasher Flashing Light Option /4 Lock Washer Nut Elastic Stop Nut Screw, X 5/8 LG Clamp Harness, Warning Light Connector, 2-Way Plate, Flasher Scr, Hex Thd Form X Wsh, Flt.193 X.875 X Bolt-Hex Head, Finished, 1/4-20x3/4 LG Light, Emergency, Amber

174 174 CURB LIGHT OPTION

175 09-5 CURB LIGHT OPTION Curb Light Option (OBSOLETE) Light Screw-1/4-20 x.75 BHS GR 8 ZN Nutsert, 1/ Cover, Light [ ] Switch Head Light [ ] = Not Shown

176 176 FIRE EXTINGUISHER OPTION 09-5 H25 2 DRIVER S COMPARTMENT 1 H15 P4872-3/ Fire Extinguisher Option Fire Extinguisher Screw, 1/4-20 x.750 HHC Lock Washer, 1/4 Split Nut, Hex 1/4-20 x.437 x.218

177 09-5 DEBRIS BASKET OPTION Debris Basket Option Debris Basket Debris Basket Frame Screw, 1/4-20 x.750 HHC Sealing Washer, 1/ Lock Washer, 1/ Nut, Hex 1/ ft. Edging 1/4 Black SD 1435

178 178 SUSPENSION SEAT OPTION 09-5 WEIGHT ADJUSTMENT LEVER BACKREST 7 ADJUSTMENT 1 FORWARD/BACKWARD ADJUSTMENT LEVER Suspension Seat Option Seat without armrests Lock Washer 5/ Nut, 5/16-18 Lock Armrest Kit (Includes both Armrests)

179 09-5 SEAT BELT OPTION FOR STANDARD SEAT Seat Belt Option for Standard Seat Seat Belt Bolt 1/2-13 x 1-3/4 LG Screw, 1/2-13 x HHC Flat Washer, x.531 x Locknut-Elastic, 1/2-13

180 180 ESP OPTION [DETERGENT & SOLUTION TANK]

181 09-5 ESP OPTION [DETERGENT & SOLUTION TANK] ESP Option (Detergent and Solution Tank) (OBSOLETE) Hose /4-20 X 0.75 Hex Head Screw, SS Pipe Thread Reducer.25 To Fitting, 1/4 Npt X 1/8 Npt, Street Elbow, Fitting, 1/4 Npt X 3/8 Hose Barb, Fitting Tee 1/4 NPT Elbow-St-Galv Deg Ftg-1/4NPT Nipple Brass Fitting, Bulkhead ( Detergent Tank) Fitting, Bulkhead (Detergent Float) Fitting-Plastic Fitting 3/4 Pipe To 3/4 Barbed Tube-Detergent Feed Hose Clamp Hose Clamp- Witteck #10p Nut - 1/4-20 Hex Support, Detergent Tank Switch, Liquid Level Tank, Detergent Washer, 11/16 OD X.260 ID X.050 Thk Washer, Sealing Washer-Lock, 1/4 Helical Spring Hose

182 182 ESP OPTION [RECOVERY TANK & DETERGENT PUMP]

183 09-5 ESP OPTION [RECOVERY TANK & DETERGENT PUMP] ESP Option (Recovery Tank & Detergent Pump) (OBSOLETE) Solution Inlet Filter Elbow, Street 3/4 NPT Fitting, 3/4 NPT Connector Sealing Washer O-Ring Seal Washer-Flat X X.125 SST Fitting, 90 Elbow Fitting, 3/4 NPT Close Nipple Fitting, 3/4 NPT Coupling Fitting, 90 Swivel Elbow Clamp Hose, Pump to Recovery Tank Nut, Hex Pump, ESP * Pump ESP (pump for ) * Port Kit (elbows for ) Flat Washer Screw, x RHM Hose, Pump to Solution Tank Spacer Pump, Peristaltic Metering Screw, x 2.00 SHC Fitting, Union-Reducer Connector Detergent Feed Tube Hose Clamp Fitting, Grommet Nut, Fiber Washer, Flat Terminal Screw

184 184 ESP OPTION [INSTRUMENT PANEL] EXISTING INSTRUMENT PANEL HARNESS INSTRUMENT PANEL 1 41 A 19 B K

185 09-5 ESP OPTION [INSTRUMENT PANEL] ESP Option (Instrument Panel) (OBSOLETE) ESP Wiring Harness ESP Instrument Panel DPS ON/OFF Switch Wire Assembly, Gr. for Detergent Low & Solution High Light Knob Decal, Detergent Flow Screw, x Lock Washer, 10 Ext Guard, Rheostat Lock Washer Nut, Hex 10-24

186 186 ESP OPTION [WIRING] 09-5 DETERGENT TANK RECOVERY TANK SOLUTION TANK DL-SW EXISTING 5 SH-SW RH-SW ESP HARNESS SECTION B ESP HARNESS SECTION A 5GPM PUMP BLK 15 1 INSTRUMENT PANEL DETG. PUMP MACHINE WIRING HARNESS RED REMOVE EXISTING TERMINALS LS- DMP 3 SOLUTION CONTROL LINKAGE 13 GND

187 09-5 ESP OPTION [WIRING] ESP Option (Wiring) (OBSOLETE) ESP Wiring Harness, Section A ESP Wiring Harness, Section B LS - DMP Switch Wire Tie Terminal,.156 Male Terminal,.250 FISO Female Carriage Bolt Flat Washer,.562 x.265 x Bracket Flat Washer,.500 x.218 x Nut-Ins-Fiber 1/4-20 ZN PL Nut, Hex Nyl Loc Roll Pin.125 x Screw, x.375 THM Terminal,.250 FISO Conduit

188 188 TIRE OPTIONS Tire, Rear Wheel Non Marking [ ] Directional Rear Wheel Kit [ ] Tire, Rear Wheel (Hvy Duty Option) [ ] Tire, Rear Wheel (Directional) TSBUS Front Tire, Urethane ( tire) [ ] = Not Shown

189 09-5 VACUUM WAND OPTION 189 1, Vacuum Wand Option Clip Screw, x.625 T/C HH Adapter Clarke Hose Clarke 1 1/2 Wand Assembly Squeegee Decal, Warning

190 190 WET SWEEP BYPASS OPTION

191 09-5 WET SWEEP BYPASS OPTION Wet Sweep Bypass Option Fitting- 3/4-16 X 13/16-16 Tee Fitting, -8 Ors Swivel 90 Elbow Hose Hyd-8 Ors Str To Switch Spdt On-Off Valve, Solenoid No Wire - Dust Vac Option Bracket, Solenoid Valve Nut, Fiber Insert 1/ Wshr-Flat, 1.063x.266x.063 Stl X 2.5 Lg Fitting-Hyd 8ors Branch Tee Collar-Clamp

192 192 AUXILIARY LP TANK OPTION 09-5

193 09-5 AUXILIARY LP TANK OPTION Auxiliary LP Tank Option Plate, Bracket Mounting Bracket, Tank Mounting Bolt, 3/8-16 x 1.0 Fin. Hex Head Nut, 3/8-16 Elastic Lock Flat Washer,.687 x.344 x Screw, 5/16-18 x 1.0 Hex Head Nut, Hex, Insert Fiber, 5/16-18

194 194 DUAL FEED LP TANKS OPTION 09-5

195 09-5 DUAL FEED LP TANKS OPTION Dual Feed LP Tanks Option /16-18, Hex Nut Valve, Dual Tank Check Bolt-Hex Head, Finished, 3/8-16 X Bracket, Tank Mounting Coupling, Lp Tank, Acme Rego 7141f Fitting, 45 Flare Elbow, 1/4 Npt Flat Washer,.687 X.344 X Grommet Hose, Lp High Pressure Hose, Lp High Pressure, Hose, Lp High Pressure, Locknut-Elastic, 3/ Plate, Bracket Mounting Screw, Hex Head, 5/16-18 X 1.00

196 196 SOLUTION OFF IN NEUTRAL OPTION

197 09-5 SOLUTION OFF IN NEUTRAL OPTION Solution Off In Neutral Option Valve, Bracket Valve, Solution (12VDC) Hose, Solution Tube 1/2 ID x Clamp, Hose (Witteck 10P) Screw, 1/4-20 Round Head Washer,.625 x.281 x Nut, 1/4-20 Fiber Insert

198 198 STAINLESS STEEL VARIABLE DUMP HOPPER OPTION / Stainless Steel Variable Dump Hopper Option Hopper, Stainless Steel Door, Hopper Dump Clamp, Hopper Flap Strap, Outer Seal Strap, Inner Sea Clamp, Door Side Seal

199 09-5 STAINLESS STEEL MANUAL DUMP HOPPER OPTION Stainless Steel Manual Dump Hopper Option Hopper, Stainless Steel Clamp, Hopper Flap Strap, Hopper Flap NOTE: This option is now obsolete.

200 200 EXTENDED BUMPERS OPTION

201 09-5 EXTENDED BUMPERS OPTION Extended Bumpers Option Bracket, Bumper Mount Flat Washer Shaft, Bumper Cotter Pin (1/8 dia. x 1.5 long) Lock Washer, 1/ Screw, 1/2-13 x 3/ Roller, Bumper

202 202 WRAP-AROUND BUMPERS OPTION

203 09-5 WRAP-AROUND BUMPERS OPTION Wrap-Around Bumpers Option (OBSOLETE) Bumper, Poly, Bumper, Poly, Bumper, Poly, Bumper, Poly, Bumper, Poly, Flat Washer,.687 x.344 x Screw, 1/4-20 x 2.0

204 204 HIGH TORQUE DRIVE WHEEL MOTOR OPTION TORQUE TO FT-LB 1 2 TORQUE TO 475 FT-LB (DRY) 375 FT-LB (LUBRICATED) High Torque Drive Wheel Motor Option Wheel Motor Kit Cotter Pin, 1/8 dia. x 1.5 long

205 09-5 HOPPER HIGH TEMP SHUTDOWN OPTION DRILL HOLE TO MOUNT BRACKET Ø Hopper High Temp Shutdown Option Bracket, Thermostat Switch Switch, Thermostat Bolt, 3/8-16 x 3/4 Fin. Hex Head Nut, 3/8-16 Hex Stop Screw, x 1/2 RHM Nut, Elastic Stop [ ] Decal-Hopper Fire [ ] = Not Shown

206 206 CLOGGED FILTER INDICATOR OPTION

207 09-5 CLOGGED FILTER INDICATOR OPTION Clogged Filter Indicator Option Regulator, Differential Pressure Switch Fitting, 1/8 NPT Barbed End Filter, Vent Plug Connector, Bulkhead Hose Screw, x 1/2 RHM Nut, Elastic Stop [ ] Decal-Hopper Filter On Control Panel (not shown): [ ] Light, Red LED Indicator [ ] = Not Shown

208 GALLON SOLUTION & RECOVERY TANKS OPTION /1-06

209 GALLON SOLUTION & RECOVERY TANKS OPTION Gallon Solution & Recovery Tanks Option (Manual Dump Only) 1* Solution Tank Bracket, Filler 3* Recovery Tank 4< Support, Debris Basket Washer, Sealing Screw, 1/4-20 x 3/4 SS Hex Head Lock Washer, 1/4 Helical Spring Nut, 1/4-20 Hex *In lieu of standards & <Required only if equipped with debris basket (Option )

210 210 POWER SPRAY WAND OPTION

211 09-5 POWER SPRAY WAND OPTION Power Spray Wand Option Nut, Hex Nyl Loc-Thin Barb, Adapter 3/8 X 3/8 Npt Plug Barb, 90 Elbow 3/8 X 3/8npt Clamp Turn Key Hose Bulkhead Fitting 3/8 Npt Hose Solution 3/8 X Terminal, Weather Pack, Male Seal Green Connector, W.P., Male, 2-Way Clamp-Hose Tool Assembly Wand Assembly SCREW #10-24 X 1.25 Lg Screw #10-24 X1.5 Lg, Rhm Washer-Flat.438 X.192 X Nut-#10-24 Elastic Stop Nut Switch, Toggle, On-Off Terminal (.156 Male) Terminal (.156 Female) Fitting-90$ Elbow (Nylon) Terminal, #8 Spring Spade Tongue, Awg Reducer-Male Pipe 1/4 X 1/ Adapter, 1/4 Hose X 1/8 Npt Fitting, 3/8 Npt-1/8 Npt Reducer Nipple Boot Wire, Red, 16 Awg X /2 Od X.375id Cobon Tubing A 1 Hose Assembly Adapter, 3 Od Od Clamp, Valve Clamp, Hose Decal-Power Wand Hose-Solution Feed Spray Nozzle Pump, Water 12v Dc Valve-Solution 1/4 Npt Street Elbow Screw, HWH x Clip, Tool

212 212 TIMED FILTER SHAKER OPTION Timed Filter Shaker Option Timer Screw, x 1.25 long Flat Washer,.500 x.219 x Nut, Elastic Stop [ ] Spade Terminal-Female [ ] Conn-Butt Splice Insulated [ ] Stranded Green Insul [ ] ga Stranded Blk Insul Wire [ ] = Not Shown

213 09-5 BROOM SELECTOR GUIDE 213 Main Broom: PN Proex & Wire (STD.) (8 Double Rows) This broom has a more aggressive cleaning action, used to pick up heavier debris. PN Nylon (Optional) (8 Double Rows) General purpose broom that can be used for all types of light soil. High wear material so uneven surfaces do not cause excessive wear. Nylon has a high heat deflection temperature, is chemical resistant and will absorb water in wet conditions. Truly a general purpose broom. PN Proex (Optional) (8 Double Rows) Synthetic fiber made of polypropylene designed to pick up paper, gravel, sand and other lighter less bulky litter. PN High Density Fibre/Wire (Optional) Fiber and wire bristles offer dust control from the natural vegetable fibers and a light cutting action from the crinkle wire. Designed for applications with fine dust and light compacted soilage. PN High Density Nylon (Optional) PN Polypropylene (Optional) (8 Double Row) 8 Double Row Length...50 (127 cm) Diameter...14 (35.5 cm) Side Broom: PN Polypropylene (STD. on Variable Dump) The side broom function is to sweep the dirt and debris away from the curb, wall, pallet, etc. into the path of the main broom. PN Nylon (Optional) Diameter...24 (60.9 cm)