Hydro-Retriever 2052 CR 1300

Transcription

1 Hydro-Retriever 2052 CR 1300 PARTS LIST Advance MODELS (battery) (battery / Hydro-Max II) Nilfisk MODELS (battery) (battery / Hydro-Max II) /99 revised 9/05 BOOK E SECTION 9.9.1

2

3 99- TABLE OF CONTENTS BOOK E Hydro-Retriever 2052B / CR 1300B E DESCRIPTION PLAN OUTER BODY E OUTER BODY E OPERATOR'S COMPARTMENT... E DRIVE PEDAL... E TRANSAXLE... E DIFFERENTIAL AND BRAKES... E BRAKE PEDAL AND LEVER... E STEERING & SPINDLE ASSEMBLY... E BROOM HOUSING ASSEMBLY... E RIGHT DOOR ASSEMBLY... E LEFT BLADE ASSEMBLY... E ACTUATOR MOUNTING ASSEMBLY... E FRONT SKIRT ASSEMBLIES... E BRUSH DRIVE... E SQUEEGEE MOUNT ASSEMBLY... E SQUEEGEE ASSEMBLY (BEFORE SN132100)... E SQUEEGEE ASSEMBLY (AFTER SN )... E SOLUTION SYSTEM (STANDARD)... E SOLUTION SYSTEM (HYDRO-MAX II)... E RECOVERY TANK (STANDARD)... E RECOVERY TANK (HYDRO-MAX II)... E VACUUM SYSTEM... E LEFT ELECTRICAL PANEL... E RIGHT ELECTRICAL PANEL... E ELECTRICAL DIAGRAM (2052 BEFORE SN1295)... E ELECTRICAL DIAGRAM (2052 AFTER SN1295 / ALL CR1300). E WHEN ORDERING PARTS * Use the digit numbers from the Ref. No. columns in this parts list. * Specify the model and serial number of the machine. * Use the space below to record the model and serial number for future reference. Model Serial No.

4 E BOOK E OUTER BODY Hydro-Retriever 2052B / CR 1300B

5 OUTER BODY-1-1 BOOK E Hydro-Retriever 2052B / CR 1300B E Item Ref. No. Qty Description Item Ref. No. Qty Description Strut, Right (2052 before SN1295) Tray, Battery Retainer, Battery (2052 before SN1295) Strut, Left (2052 before SN1295) Scr, Hex Hd 5/16-1 x Guard, Belt Nut, Hex Nyl Loc 5/ Nut, Hex Nyl Loc 1/ Prop-Rod Weldment Bushing,.25 x.3 x Scr, Hex Hd 1/-20 x Hinge Retainer, Hinge Wsh, Flt SAE 1/ Pin, Cot Hair SS.12 x Wsh, Flt SAE 1/ Scr, Hex Hd 1/-20 x Headlight Replacement Bulb (for ) Scr, Hex Thd Form 10-2 x Mounting, Headlight Strobe * Lens, Amber (for ) * Flash Tube (for ) Bracket, Beacon Scr, Hex Thd Form 1/-20 x Light, Riser Roller Kit (#25, 2-29 / before Sept. 2000) Nut, Hex Nyl Loc 1/2-13 (before Sept. 2000) Scr, Hex Hd 3/-16 x 1.00 (before Sept. 2000) * Nut, Hex Nyl Loc 3/-16 (before Sept. 2000) Wheel, Roller (before Sept. 2000) Mount, Roller (before Sept. 2000) Scr, Hex Hd 1/2-13 x 5.00 (before Sept. 2000) Cover * Gasket Chassis Weld t (before Sept. 2000) Chassis Weld t (after Aug. 2000) Scr, Pan Phil 10-2 x Fascia, Front (2052) Fascia, Front (CR 1300) * Scr, Hex Hd 5/16-1 x Plate * Scr, Hex Hd 3/-16 x.50 * Scr, Hex Hd 3/-16 x 1.00 * Nut, Hex Nyl Loc 3/-16 * Wsh, Flt SAE 3/ Decal, Flow Control Decal, Hands Clear Bumper, Roller * Pin * Ring, Ret Ext Type E Panel Weldment, Right * Scr, Hex Type 1 3/-16 x 1.00 * Nut, Hex Nyl Loc 3/-16 * Panel Weldment, Left * Scr, Hex Type 1 3/-16 x 1.00 * Nut, Hex Nyl Loc 3/ Center Panel Weldment (before SN1295) * Scr, Hex Type 1 3/-16 x 1.00 * Wsh, Flt SAE 3/ * Scr, Hex Hd 5/16-1 x.50 * Nut, Hex Nyl 5/ Seat, Super Scr, Hex Hd 3/-16 x Decal, Warning Broom * Decal, Battery Plate, Fastener Retainer, Battery (2052 after SN1295 / all CR1300) Nut, Hex Jam 5/16-1 (2052 after SN1295 / all CR1300) Scr, Hex Hd 5/16-1 x.5 (2052 after SN1295 / all CR1300) Cable (2052 after SN1295 / all CR1300) Nut, Hex Ny Loc 5/16-1 (2052 after SN1295 / all CR1300) Guard, Belt (2052 after SN1295 / all CR1300) Tray, Battery (2052 after SN1295 / all CR1300) Rear Roller Kit (#51-55 / after Aug. 2000) Mount, Rear Roller (after Aug. 2000) Roller (after Aug. 2000) Ring, Ret Type E.50 (after Aug. 2000) Axle, Roller (after Aug. 2000) Scr, Hex Type F 3/-16 x 1.00 (after Aug. 2000) * Decal, Battery ** Overhead Guard Assembly ** Bumper Assembly Kit ** Battery Slide Out Kit (2052 from SN1295 to SN ) (all CR1300 up to SN16159) ** Battery Roll Out Kit (2052 after SN ) (CR 1300 after SN16159) ** Backup Alarm Kit ** Hose & Wand Kit ** Seat Belt Kit * = Not Shown ** = Optional

6 E BOOK E OUTER BODY Hydro-Retriever 2052B / CR 1300B FRONT

7 99- OUTER BODY-2 BOOK E Hydro-Retriever 2052B / CR 1300B E Nut, Hex Nyl Loc 1/ Scr, Hex Hd 10-2 x Nut, Hex Nyl Loc Hinge Pin Weldment Scr, Flt Phil 1/-20 x Door, Right * Door, Left Right Broom Door Assembly (#1, -13) Left Broom Door Assembly (#1, -13) Latch Scr, Hex Hd 1/-20 x Right Door Weldment * Left Door Weldment Scr, Hex Thd Form 1/-20 x Mount, Right Splash Guard * Mount, Left Splash Guard Wsh, Flt SAE 1/ Guard, Right Splash * Guard, Left Splash Strike, Latch * = Not Shown

8 E BOOK E OPERATOR'S COMPARTMENT Hydro-Retriever 2052B / CR 1300B

9 99- OPERATOR'S COMPARTMENT BOOK E Hydro-Retriever 2052B / CR 1300B E Plate, Seat (CR1300 before SN1301) (2052 before SN19196) Plate, Seat (CR1300 after SN13013) (2052 after SN19195) Scr, Hex Thd Form 10-2 x Hinge (CR1300 before SN1301) (2052 before SN19196) Hinge (CR1300 after SN13013) (2052 after SN19195) Wsh, Flt SAE # Angle (CR1300 before SN1301) (2052 before SN19196) Angle (CR1300 after SN13013) (2052 after SN19195) Panel Switch, Squeegee (S6) Switch, Solution Solenoid (S19) Switch, Scrub Brush (S) Switch, Headlight (S5) Fuel Gauge, Battery (P2) * Gasket * Scr, Pan Phil 6-32 x.50 * Wsh, Int Shprf #6 * Nut, Hex Machine Decal, Control Panel Panel * Scr, Hex Thd Form 10-2 x.50 * Wsh, Flt SAE # Hourmeter (P1) * Gasket * Scr, Pan Phil 6-32 x.50 * Wsh, Int Shprf #6 * Nut, Hex Machine Bracket, Keylock * A/R Replacement Key * Switch, Toggle (Main Power / S) Panel, Right * Scr, Hex Thd Form 1/-20 x.50 * Wsh, Flt SAE # Decal, Caution Panel * Scr, Hex Thd Form 10-2 x.50 * Wsh, Flt SAE # Floor Plate Weldment * Scr, Hex Thd Form 10-2 x.3 * Wsh, Flt SAE #10 * Floor Mat Panel, Floor * Scr, Hex Thd Form 10-2 x.50 * Wsh, Flt SAE #10 * Floor Mat Decal, Wear Items 2052B Decal, Wear Items CR 1300B Decal, Warning Tip Over Switch, Seat (S13) (2052 before SN1295) Decal, Important Switch, Horn (S9) Scr, Hex Hd 1/-20 x Connector Assembly Connector Assembly, Dual Decal, Control Panel Disconnect Assembly Decal, Emergency Panel * Scr, Hex Thd Form 10-2 x.50 * Wsh, Flt SAE # Panel, Control Rod Weldment (seat prop rod) Pin, Cot.09 x Scr, Hex Hd Loc 5/16-1 x.62 (2052 before SN1295) Wsh, Flt Hard.3 x 1.00 x.12 (2052 before SN1295) Spring, Compression (2052 before SN1295) Pin (2052 before SN1295) Nut, Hex Jam 5/16-1 (2052 before SN1295) Leveler (2052 before SN1295) Cap, Snap on 3/ Hex (2052 before SN1295) Scr, Hex Hd 6-32 x. (2052 before SN1295) Scr, Hex Hd -32 x.25 (2052 before SN1295) Cover (2052 before SN1295) Latch (2052 after SN1295 / all CR1300) * Spacer, Latch (2052 after SN1295 / all CR1300) Switch, Recycle Pump (S / Hydro-Max II) Metering Barb NOTE (stamped D / Hydro-Max II) Metering Barb NOTE (stamped F / Hydro-Max II) Metering Barb NOTE (stamped 2 / Hydro-Max II) Detergent Tank Empty Light (H2) (Hydro-Max II) * Harness, Dash (2052 before SN1295) * Harness, Dash (2052 after SN1295 / all CR1300) * Low Voltage Cut-Out Module (K) * = Not Shown NOTE: Refer to decal PN for explanation of codes; D, F and 2.

10 E BOOK E DRIVE PEDAL Hydro-Retriever 2052B / CR 1300B FRONT

11 99- DRIVE PEDAL BOOK E Hydro-Retriever 2052B / CR 1300B E Angle Bearing Scr, Hex Thd Form 1/-20 X Nut, Hex Flex Loc Switch Scr, Hex 6-32 X Mount Scr, Hex Thd Form 1/-20 X Wsh, Flt SAE 1/ Wsh Flt Steel Potentiometer Assembly (#11-16,2) Bracket Potentiometer 1 3/ Shakeproof Wsh 1 3/-32 Nut Coupler Clamp, Spring Retaining Ring Flanged Bearing Bushing Spring Compression Wsh, Flt Brass Bracket Scr, Hex 1/-20 X Shaft Pedal Pin Retaining Ring Pedal Mat Scr, Hex 10-2 X Linkage Scr, Hex 10-2 X Strap Wsh, Flt SAE # Collar Scr, Soc Set Loc 10-2 X Scr, Hex SS 1/-20 X Pin, Spr.09 X Nut, Hex Nyl Loc 1/ Bushing.25 X.3 X Nut Plate Nut, Hex Serrated 1/-20

12 E BOOK E TRANSAXLE Hydro-Retriever 2052B / CR 1300B 1 19 FRONT

13 99- TRANSAXLE BOOK E Hydro-Retriever 2052B / CR 1300B E Drive Motor * Carbon Brush (set of ) Key, Sq..19 X Chain Coupler Scr, Soc Set Loc 5/16-1 X Barb3/16 X 1/ Brass Scr, 3/-16 X Wsh, Flt Std 3/ Tube Scr, Hex Thd Form 10-2 X Knob Nut, Hex Jam 1/ Rod Tube Clamp Left Bracket Adapter, Barb Tube Hose Clamp / Pipe Plug Scr, Hex Loc 3/-16 X Wsh, Flt SAE SS 3/ Nut, Hex Nyl Loc 3/ Nut, Hex Nyl Loc5/ Cable Clamp Scr, Flt Phil 1/-20 X Wheel Assembly, includes: Tire Hub Lug Nut Strap Strap Scr, Hex Thd Form 1/-20 X Blade Left Bracket * Right Bracket Scr, Hex 5/16-1 X Wsh, Flt Std 5/ /2 Pipe Plug Right Bracket Hydrostatic Axle Shaft Retaining Ring Int Ball Bearing Spacer Gasket Shaft Housing Wsh Flt SAE / Pin Cot.19 X Castle Nut Scr, Soc Set Loc 1/-20 X Sprocket Key Sq..19 X Motor Adapter Grommet Bushing.50 X.62 X Wsh, Flt Harden.516 X.93 X Scr, Hex 1/2-13 X Strip, Isolator * = Not Shown

14 E BOOK E DIFFERENTIAL AND BRAKES Hydro-Retriever 2052B / CR 1300B FRONT

15 99- DIFFERENTIAL AND BRAKES BOOK E Hydro-Retriever 2052B / CR 1300B E Expansion Plug Snap Ring Shim Bearing Bearing Race Spacer Gasket Oil Seal Wheel Bearing Retaining Ring Bearing Lever * Pin * Retainer Dust Shield NOTE Brake Shoe Adjuster Spring Spring (Green) Wiper Seal Spring (Red) Brake Mount Casting NOTE Axle Shaft Wheel Bolt Brake Drum NOTE: Re-assemble using a 1/16" (1.5 mm) bead of silicone sealant.

16 E BOOK E BRAKE PEDAL AND LEVER Hydro-Retriever 2052B / CR 1300B FRONT

17 99- BRAKE PEDAL AND LEVER BOOK E Hydro-Retriever 2052B / CR 1300B E Brake Lever Scr, Hex Thd Form 1/-20 X Floor Mat Strap Scr, Flt Phil 1/-20 X Cable Clamp Cable Nut, Hex Jam 5/ Pin Ring Ret Ext Type E Pad, Rubber Bearing Lever Scr, Soc Set Loc 1/-20 X Rod Scr, Soc Set Loc 5/16-1 X Scr, Hex 1/-20 X Nut, Hex Jam 5/ Collar Spring Lever Nut, Hex Nyl Loc 5/ Scr, Hex 5/16-1 X 1.00

18 E BOOK E STEERING & SPINDLE ASSEMBLY Hydro-Retriever 2052B / CR 1300B FRONT After Serial No

19 99- STEERING & SPINDLE ASSEMBLY BOOK E 05-9 Hydro-Retriever 2052B / CR 1300B E Steering Idler Assy (#1-10) Scr, Hex Thd To Hd 5/16-1 x Angle Scr, Hex Thd To Hd 3/-16 x Nut, Hex Nyl Loc-Thin 3/ Wsh, Flt STD 3/ Sprocket Assembly * Sprocket * Bearing, Sleeve * Fitting, Lube 1/ Wsh, Flt STD 1/ Pin Bracket Weld t Nut, Hex Jam 3/ Guard Scr, Hex Hd 1/-20 x Wsh, Flt.26 x.90 x Sprocket Weld t Tab, Lock Spindle Assembly TSB 91 (#16-3/ before SN Spindle Assembly TSB 91 (#66-/ after SN15163) Nut, Castle / Wsh, Flt SAE / Bearing, Ball Housing Weld t Fitting, Lube 1/ Bearing, Race Bearing, Tapered Seal, Shaft Spindle Weld t. (before SN1516) Bushing Pin, Cotter.12 x Wheel Assembly (#2-30/ before SN1516) Seal, Wheel Bearing, Tapered Bearing, Race Wheel 10 x 5 (before SN1516) Axle (before SN1516) Retainer Bushing Scr, Hex Hd Loc 5/16-1 x Panel Channel Scr, Hex Thd Form 10-2 x Sprocket Scr, Soc Set Loc 1/-20 x Bearing, Flange Scr, Soc Set Loc 5/16-1 x Collar, Shaft Key, WDF # Shaft Scr, Soc Set Loc 3/-16 x Universal Joint Shaft, Steering Cup Adapter Steering Wheel Washer Wsh, flt SAE 1/ Nut, Hex Nyl Loc 1/ Cap Decal, 2" Logo Chain * Link Sprocket Support Weldment Nut, Hex Nyl Loc-Thin 5/ Wsh, Flt SAE 5/ Scr, Hex Thd Form 1/-20 x Base, Sprocket Support Scr, Hex Hd 5/16-1 x Scr, Hex Hd 5/16-1 x Wsh, Flt SAE # Scr, Hex Hd 5/16-1 x 2.50 After SN Spindle Weld t Bushing Axle Wheel Assy (#1-) * Fitting, Lube 1/ Bushing TSBUS Seal, Shaft NOTE Bearing, Cone NOTE Bearing, Cup NOTE Wheel NOTE Bushing TSBUS * = Not Shown NOTE: Quantities are for one wheel assembly.

20 E BOOK E BROOM HOUSING ASSEMBLY Hydro-Retriever 2052B / CR 1300B B g 5 15 h 2 i g j 55 k A A FRONT p 16 o l 1 f e n m d c l a 32 b B 50

21 99- BROOM HOUSING ASSEMBLY BOOK E 05-9 Hydro-Retriever 2052B / CR 1300B E Scr, Hex Hd 1/-20 x Wsh, Flt SAE # Scr, Hex Hd 1/-20 x Scr, Soc Set Loc 5/16-1 x Scr, Hex Hd 5/16-1 x Wsh, Flt SAE 3/ Scr, Hex Hd 5/16-1 x Pin, Spr.31 x Nut, Hex Nyl Loc 5/ Nut, Hex Nyl Loc 1/ Scr, Hex Thd To Hd 3/-16 x Nut, Hex Nyl Loc Scr, Pan Phil SS 10-2 x Nut, Hex Jam SS 3/ Nut, Hex Nyl SS 3/ Ring, Ret Ext Type E.31 Dia Ring, Ret Ext Type E.3 Dia Pin, Cotter 1/16 x 5/ Scr, Hex Thd Form 10-2 x Scr, Hex Thd Form 1/-20 x.5 See TSB 25 (Note 1) Scr, Hex Thd Form 1/-20 x Scr, Hex Thd Form 1/-20 x Scr, Hex Thd Form 10-2 x Wsh, Flt.3 x.93 x Nut, Hex Machine 1/ Pulley, Cable Collar Bearing, Flange Spring, Ext Belt, Poly V 20J Idler Assembly Lever Weldment a Bearing, Sleeve b Pulley, Flat c Bearing, Ball d Ring, Ret Int e Wsh, Flt.3 x.93 x.12 f Scr Hex Loc 1/-20 x Lever Weldment Lever Weldment Broom Arm Assembly Arm Weldment g Bearing, Ball h Idler Lug i Bushing 1 x 1.20 x.90 j Wsh, Flt SAE 3/ k Nut, Hex Nyl Loc 3/ Arm Assembly Arm Weldment l Bearing, Ball m Idler n Spacer o Wsh, Flt SAE 3/ p Nut, Hex Nyl Loc 3/ Rod Mount Weldment Plate Strap Blade Spacer See TSB 25 (Note 1) Pin, Yoke Spring, Ext Strap Skirt Angle Cable Guide, Slide Clevis Pin.25 x Decal, Hands Clear Guard, Pulley Broom Housing Weldment Left Blade Assembly (see associated pages) Right Door Assembly (see associated pages) Gasket 3/ x 3/ x 1-1/ Pillow Block Knob Handle Weldment Wsh, Flt STD 5/ Scr, Hex Hd Loc 5/16-1 x Scr, Hex Hd 6-32 x Switch, Snap SPST (Broom Switch) Bracket, Switch Scr, Hex Thd Form 10-2 x Cable Turnbuckle Rod Linkage Pin, Cot.06 x Wsh, Flt SAE 1/ Scr, Hex Hd 1/-20 x Bar Weldment Ring, Ret Ext Type E Bushing.31 x.50 x Motor, 36V, 1HP * Carbon Brush Set Mount Weldment Nut, Hex Nyl Loc-Thin 3/ Scr, Hex 3/-16 x Sheave, Poly-V Key, Sq..19 x Wsh, Flt.266 x.5 x Hopper SS Main Broom * = Not Shown Note 1: Be sure of correct assembly, four Screws (20) go in the bottom holes of Guides () through the Spacers (1) and then they must go into the corresponding bottom holes in the broom housing.

22 E BOOK E RIGHT DOOR / LEFT BLADE ASSEMBLIES Hydro-Retriever 2052B / CR 1300B FRONT FRONT 1 6

23 99- RIGHT DOOR / LEFT BLADE ASSEMBLIES BOOK E 02-1 Hydro-Retriever 2052B / CR 1300B E RIGHT DOOR ASSEMBLY Wsh, Flt STD 1/ Pin, Spr..12 x Nut, Hex Nyl Loc SS 1/ Nut, Hex Nyl Loc 1/ Nut, Hex Nyl Loc SS Scr, Pan Phil SS 10-2 x Scr, Pan Phil SS 1/-20 x Scr, Pan Phil SS 1/-20 x Ring, Ret Ext Type E.31 Dia Ring, Ret Ext Type E.3 Dia Pin, Cotter 1/16 x 5/ Scr, Hex Thd Form 10-2 x Scr, Hex Thd Form 1/-20 x.5 See TSB 25 (Note 1) Scr, Hex Thd Form 1/-20 x Scr, Hex Type 23 1/-20 x Scr, Hex Thd Form 10-2 x Nut, Hex Jam 1/ Pulley, Cable Bracket Weldment Latch Weldment Plate Spacer See TSB 25 (Note 1) Pin, Yoke Blade, Right Side ** Blade, Right Side, Gum Rubber Spring, Extension Blade Strap Cable Assembly Guide, Slide Clevis Pin.25 x Strip Forming Plate, Right Side Actuator Guard, Pulley Door Weldment Right Blade Weldment Handle Bearing, Sleeve Strip, Rear Forming Wsh, Flt.266 x.50 x.036 ** = Optional Accessory Note 1: Be sure of correct assembly, four Screws (13) go in the bottom holes of Guides (29) through the Spacers (22) and then they must go into the corresponding bottom holes in the door weldment. LEFT BLADE ASSEMBLY Scr, Hex Type 23 1/-20 x Strip Forming Blade, Left Side ** Blade, Left Side, Gum Rubber Strap Strap Plate, Left Side Actuator Left Blade Weldment Strip, Rear Forming ** = Optional Accessory

24 E BOOK E ACTUATOR MOUNTING ASSEMBLY Hydro-Retriever 2052B / CR 1300B FRONT

25 99- ACTUATOR MOUNTING ASSEMBLY BOOK E Hydro-Retriever 2052B / CR 1300B E Nut, Hex Nyl Loc 1/ Ring, Ret Ext Scr, Hex Thd Form 10-2 x Scr, Hex Thd Form 1/-20 x Actuator Motor * Replacement Plastic Nut * Carbon Brush Set Mount, Rear Left Cable Mount, Rear Right Cable Pin Retainer Weldment Pin, Nut Plate, Nut Plate, Nut Cover, Access Actuator Mount Weldment * = Not Shown

26 E BOOK E FRONT SKIRT ASSEMBLIES Hydro-Retriever 2052B / CR 1300B FRONT

27 99- FRONT SKIRT ASSEMBLIES BOOK E Hydro-Retriever 2052B / CR 1300B E Skirt Assembly, Left (#1-) Skirt Assembly, Right (#-1) Mount Weld t., Left Blade ** Blade, Gum Rubber Strap Plate Scr, Hex Thd Form 1/-20 x Blade, Backup Scr, Hex Thd Form 1/-20 x Mount Weld t., Right Blade ** Blade, Gum Rubber Strap Plate Scr, Hex Thd Form 1/-20 x Blade, Backup Scr, Hex Thd Form 1/-20 x 1.00 ** = Optional Accessory

28 E BOOK E BRUSH DRIVE Hydro-Retriever 2052B / CR 1300B FRONT

29 99- BRUSH DRIVE BOOK E Hydro-Retriever 2052B / CR 1300B E Brush Drive Motor Scr, Hex 5/16-1 X Wsh, Flt Std 5/ Bolt, Eye 1/-20 X Spring Motor Mount Weld t Scr, Hex 1/-20 X Wsh, Flt Std 1/ Stud Plate Bushing Parallel Bar Wsh, Flt.52/.56 X X Bearing Bushing Nut, Hex Nyl Loc 5/ Wsh, Flt Harden.516 X.93 X Scr, Hex 1/2-13 X Left Gear Case Bracket Scr, Hex Loc 3/-16 X Strap Left Gear Case Wsh, Flt SAE 3/ Wsh Loc HI-Collar 3/ Key, Sq..25 X Scr, Soc Set Loc 5/16-1 X Sheave Universal Casting Disc Scr, Hex Loc 3/-16 X Right Gear Case Weight Bracket Bushing Scr, Hex Loc 3/-16 X Brush Holder Scr, Hex 1/-20 X Scr, Hex 5/-1 X Spring Retainer Wsh, Flt.266 X.906 X Scr, Pan Phil 10-2 X Plate Pin Scr, Soc Set Loc 5/16-1 X Lower Coupler Nut, Hex Nyl Loc 3/ Right Gear Case Bracket Weight Bar Scr, Hex 1/-20 X Plate Scr, Hex 5/16-1 X Bracket Nut, Hex Jam 1/ Actuator Pin Key, Sq..19 X Nut, Hex Nyl Loc 1/ Scr, Hex 1/-20 X Bar Nut, Hex Nyl Loc 1/ Scr, Hex 1/-20 X Ring Retainer Ext Type E Pin Bracket Weldment Belt Sheave Switch Yoke Scr, Hex 6-32 X Spring,.50 x.5 * MidLite 10 Brush (standard) ** Magna-Grit 6 Brush ** Dyna-Grit 0 Brush ** Prolene Brush ** Aglite-Grit 500 Brush ** Prolite Brush ** Union Mix Brush ** MidGrit 20 Brush ** Pad Holder * = Not Shown ** = Optional Accessory

30 E BOOK E SQUEEGEE MOUNT ASSEMBLY Hydro-Retriever 2052B / CR 1300B FRONT

31 99- SQUEEGEE MOUNT ASSEMBLY BOOK E 0-1 Hydro-Retriever 2052B / CR 1300B E Item Ref. No. Qty Description Item Ref. No. Qty Description Nut, Whiz 1/ Wsh, Flt SAE 1/ Nut, Hex Hvy 1/ Scr, Hex Hd 3/-16 x Nut, Hex Nyl Loc-Thin1/2-13 (See Note 1) Wsh, Flt SAE 5/ Scr, Hex Hd 5/16-1 x Scr, Hex Hd 1/-20 x Wsh, Flt SAE 1/ Scr, Hex Hd 1/2-13 x Nut, Hex Machine 3/ Pin, Cotter 1/16 x 5/ Nut, Hex Nyl Loc 1/ Scr, Pan Phil 1/-20 x Scr, Pan Phil 1/-20 x Nut, Hex Nyl Loc-Thin 1/ Ring, Ret Ext Type E.3 Dia Ring, Ret Ext Type E.50 Dia Wsh, Flt Harden.51 x.93 x Washer, Wave Wsh, Flt.26 x.5 x Scr, Hex Thd Form 10-2 x Scr, Hex Type 23 1/-20 x Screw, Thumb 1/ x 1/ Nut, Hex Jam 5/ Nut, Hex Jam 1/ Bushing Bushing,.25 x.3 x Spring Bushing Actuator, Motor * Replacement Plastic Nut * Carbon Brush Set Spring, Ext Rod Collar Weldment Yoke Plate Bracket Weldment TSBUS Squeegee Assembly (before SN132100) Squeegee Assembly (after SN ) Lifter Weldment Tool Mount Weldment Caster Wheel (See Note 1) Nut, Hex Jam 1/2-13 (See Note 1) Cable Assembly Lever Arm Weldment Pin Pin Pin Yoke Weldment (before SN132100) Yoke Weldment (after SN ) Spindle Assy (before SN1516) TSB 91 (see Steering & Spindle Assembly) Spindle Assy (after SN15163) TSB 91 (see Steering & Spindle Assembly) Bearing, Flange Yoke, Actuator Pin,.15 Hairpin Cotter Ball Joint Tab Clevis Pin.25 x Bearing, Sleeve * = Not Shown Note 1: The original caster had a threaded shaft of 3/", this caster (5603 has a 1/2" diameter shaft. When replacing a 3/" caster you will need to order 1/2" nuts ( & ). The holes in (0) Mount Weldment will have to be drilled out to a diameter of 1/2" to accommodate the new casters. Replace both casters together if replacing a caster with a 3/" shaft.

32 E BOOK E SQUEEGEE ASSEMBLY (before SN132100) Hydro-Retriever 2052B / CR 1300B FRONT

33 99- SQUEEGEE ASSEMBLY (before SN132100) BOOK E Hydro-Retriever 2052B / CR 1300B E Squeegee Assembly Scr, Pan Phil 6-32 x Wsh, Flt SAE 5/ Scr, Hex Thd To Hd 5/16-1 x Nut, Wing 5/ Nut, Hex Nyl Loc-Thin Scr, Hex Thd Form 1/-20 x Scr, Hex Thd Form 1/-20 x Wheel, 3.00 x Nut, Thumb Blade Bushing Strap Strap Strap Tool Weldment Gasket, Inlet Adapter, Squeegee Blade, Rear Blade, Front Latch * Hose, Squeegee * Clamp, Hose ** Gum Rubber Squeegee Blade Kit (#1 & 19 / optional) ** Blade, Rear ** Blade, Front * = Not Shown ** = Optional Accessory

34 E BOOK E SQUEEGEE ASSEMBLY (after SN ) Hydro-Retriever 2052B / CR 1300B FRONT

35 99- SQUEEGEE ASSEMBLY (after SN ) BOOK E Hydro-Retriever 2052B / CR 1300B E Squeegee Assembly Scr, Pan Phil 6-32 x Wsh, Flt SAE 5/ Scr, Hex Thd To Hd 5/16-1 x Nut, Wing 5/ Nut, Hex Nyl Loc 1/ Nut, Hex Nyl Loc-Thin Nut, Wing 1/ Scr, Hex Thd Form 1/-20 x Scr, Hex Thd Form 1/-20 x Nut, Hex Jam 1/ Nut, Thumb Wheel, 3.00 x Tool Weldment Mount, Left Squeegee Wheel Bushing Mount, Right Squeegee Wheel Strap, Front Blade Strap, Rear Left Blade Strap, Rear Right Blade Gasket, Inlet Adapter, Squeegee Blade, Front Blade, Rear Blade, Rear Backing Latch * Hose, Squeegee * Clamp, Hose ** Blade Kit (Linatex) ** Blade Kit (Gum Rubber) * = Not Shown ** = Optional Accessory

36 E BOOK E SOLUTION SYSTEM (STANDARD) Hydro-Retriever 2052B / CR 1300B FRONT

37 99- SOLUTION SYSTEM (STANDARD) BOOK E Hydro-Retriever 2052B / CR 1300B E Scr, Hex Hd 5/16-1 X Nut, Hex Nyl Loc Rivet, Pop A/S.125X.3/ Scr, Hex Thd Form 1/-20 X Clamp, Hose SAE # Clamp, Hose SAE # Cap, Pipe GHT Nylon Cable Tie Strap Cover Wsh, Flat SS.125 X.500 X Clamp, Hose SAE # Washer, Flat Washer, Rubber Solution Tank Cover Gasket Barb, 1 X 1 PVC Strainer, In-Line * Replacement Strainer Bowl Barb, 90 Elbow 11/16 X 3/ NPT Valve 2 Way Solenoid Hose, Spiral Tank, Solution Routed Bushing, Reducer Bracket U-Bolt Hose, Spiral Hose, Radiator Conduit, 12" Barb, Adapter 3/ X 3/ GHT Barb, Adapter 1 1/ X 1 1/ NPT Barb, Elbow Male Nipple, Close PVC Valve (w/handle) Handle Scr, Hex 1/-20 X Wsh, Flt SAE 1/ Bracket Tee Hose Clamp Tube Tube Nut, Hex Nyl Loc 1/ Horn Barb Flow Control Valve Flow Control Valve Assembly (#2,3,,,65) Barb Tube, Wire Reinforced Solution Pipe Bracket Scr, Pan Phil Thd Form 10-2 X Scr, Hex Loc 1/-20 X Bushing Bearing Bar Plate Bushing Scr, Hex Thd to Hd 5/16-1 X Bearing Bushing Bar Bar Ring Ret Ext Type E Lever Knob Nut, Hex Jam 5/ Scr, Hex 1/-20 X Bushing Indicator, Level Rivet, Pop Cable, Tie Conduit, 16" Support, Drain Hose Clamp, Hose Scr, Flt Phil 5/16-1 x Wsh, Flt SAE 5/ Nut, Hex Nyl Loc 5/16-1 * = Not Shown

38 E BOOK E SOLUTION SYSTEM (HYDRO-MAX II) Hydro-Retriever 2052B / CR 1300B FRONT To Solution Pump

39 99- SOLUTION SYSTEM (HYDRO-MAX II) BOOK E Hydro-Retriever 2052B / CR 1300B E Hydro-Max II Solution Tank Assembly (#1-2) Scr, Pan Phil Thd Form 10-2 x Scr, Hex Thd Form -32 x Elbow, 90 Street Barb, Adapter 1/2 x 1/2NPT Nipple, 3/NPT x 5/ Gasket,.06 x.50 x Gasket,.06 x.50 x Injector Hose, Barb, Adapter 1/2 x 3/NPT Strain Relief Tank, Chemical Gasket Filler Weldment Hose, Switch Assembly Connector, W.P. Male 2-Way Cap, Fuel Tank Scr, Pan Phil SS Type AB x Barb, Bulkhead Cover, Chemical Tank Tank, Solution Switch Assembly Elbow, 90 Street Nut, Jam 5/-1 Brass Barb, Metering (stamped C) Elbow, 3/ x 90 Brass Hose, Spiral Decal Decal, Detergent Ratio NOTE: Except for the items listed on this page, all other solution system components are the same as the Standard Solution System.

40 E BOOK E RECOVERY TANK (STANDARD) Hydro-Retriever 2052B / CR 1300B FRONT 2 1 To Filter Box To Squeegee

41 99- RECOVERY TANK (STANDARD) BOOK E 01-2 Hydro-Retriever 2052B / CR 1300B E Recovery Tank Assy (1-31 / 2052 before Sept. 2000) Recovery Tank Assy (1-31 / CR1300 before Sept. 2000) Recovery Tank Assy (1-1, 20-31, 9-51 / 2052 after Aug. 2000) Recovery Tank Assy (1-1, 20-31, 9-51 / CR1300 after Aug. 2000) Nut, Hex Nyl Loc SS 1/-20 (qty of 19 after Aug. 2000) Nut, Hex Nyl Loc-Thin SS Nut, Hex Nyl Loc-Thin SS 1/-20 Intentionally Omitted Scr, Pan Phil SS 1/-20 x Scr, Flt Phil SS 1/-20 x Scr, Pan Phil SS 1/-20 x Wsh, Flt SS.26 x 1.00 x Cork Strap Float Hanger Clamp, Hose SAE # Weight Rod Plate, Rec Tank Recovery Tank (2052 before Sept. 2000) Recovery Tank (CR1300 before Sept. 2000) Recovery Tank (2052 after Aug. 2000) Recovery Tank (CR1300 after Aug. 2000) Baffle, Right Baffle, Left Retainer, Tank (before Sept. 2000) Right Standpipe Weldment Cleanout Cap Assembly * Gasket, Cleanout Cap * Outer Ring * Inner Ring * O-Ring 22 Intentionally Omitted 23 Intentionally Omitted Shut-off Rod Gasket Tube Plug, T-Handle Hose Left Standpipe Weldment Washer, Sealing 1/ Wsh, Flt SAE SS 1/ (before Sept. 2000) Shim (qty approximate, use as required) (before Sept. 2000) Scr, Hex Hd SS 1/-20 x 1.50 (before Sept. 2000) Bumper Nut, Hex Jam 1/ Gasket, Bulb Hose, Squeegee Hose, Filter Box Drain & Plate Weldment (before Sept. 2000) Scr, Hex Thd Form 1/-20 x.50 (before Sept. 2000) Stop, Recovery Tank (before Sept. 2000) Mount, Hinge Left (after Aug. 2000) * Mount, Hinge Right (after Aug. 2000) Nut, Hex Nyl Loc 3/-16 (after Aug. 2000) Wsh, Flt SAE 3/ (after Aug. 2000) Scr, Hex Hd 3/-16 x 2.00 (after Aug. 2000) Hinge Pin Weldt, Left (after Aug. 2000) * Hinge Pin Weldt, Right (after Aug. 2000) Pin, Hair (after Aug. 2000) Left Top Hinge Weld t. (after Aug. 2000) * Right Top Hinge Weld t. (after Aug. 2000) * Gasket (after Aug. 2000) * Stud Plate Weld t. (after Aug. 2000) Nut, Hex Nyl Loc SS 3/-16 (after Aug. 2000) Wsh, Flt SAE SS 3/ (after Aug. 2000) Cable Assy (after Aug. 2000) Scr, Hex 3/-16 x 1.25 (after Aug. 2000) * Decal, Drain Tank * Decal, Warning Cap Release * = Not Shown

42 E BOOK E RECOVERY TANK (HYDRO-MAX II) Hydro-Retriever 2052B / CR 1300B To Solution Tank To Filter Box To Squeegee 3 FRONT 3

43 99- RECOVERY TANK (HYDRO-MAX II) BOOK E Hydro-Retriever 2052B / CR 1300B E Hydro-Max II Recovery Tank Assy (#1-2) Nut, Cap 1/ Scr, Rnd Hd Slt Brs 1/-20 x Nut, Hex Brass 1/ Nut, Hex Flex Loc 1/ Ring, Ret Ext Type E Reinf..25 Dia Barb, Adapter 1/2 x 1/2NPT Float Clamp, Hose Screw Fastener Washer, Retainer Weight Rod Screen, Panel Tank Weldment Shutoff Rod Switch Assembly (#5-2) Cover Gasket, Door Plate Strainer Connector, Male Screw, Receptacle Sleeve Assembly * Sleeve Weldment * Gasket (20.32 cm) Elbow, 90 Street Nipple, 1/ Hose, Spiral.50 (91. cm) Decal, Decal, CR Hanger Scr, Pan Phil SS 1/-20 x Plate, Recovery Tank Scr, Flt Phil SS 1/-20 x Gasket, Bulb Plate, Tank Adjustment Bumper Nut, Hex Jam 1/ Clamp, Hose SAE # Hose, Squeegee Scr, Hex Thd Form 1/-20 x Hose, Filter Box Stop, Recovery Tank Hose Tube Cork Strap Plug, T-Handle Nut, Hex Nyl Loc # Mount, Pump Hose, Spiral.50 (2.3 m) Elbow 50 Intentionally Omitted Pump Assembly Scr, Hex Thd Form 10-2 x Wsh, Flt SAE # Nut, Hex Nyl Loc-Thin 1/ Wsh, Flt SAE 1/ A/R Spacer Corner Bracket Nut, Hex Nyl Loc SS Scr, Pan Phil SS 10-2 x Ring, Ret Ext Type E Reinf.25 Dia Wire, 1 Ga Black Insulator Tube Switch, Encl. Mercury Splice, Parallel Tubing, Heatshrink Float, Foam Strain Relief Terminal, Weather Pack, Male Rod Weldment Seal, Weather Pack Tie, Cable Conduit Clamp Hose SAE 52 * = Not Shown

44 E BOOK E VACUUM SYSTEM Hydro-Retriever 2052B / CR 1300B 1 FRONT To Recovery Tank

45 99- VACUUM SYSTEM BOOK E Hydro-Retriever 2052B / CR 1300B E Filter Box Assembly (#1-9) Screw Fastener Retaining Washer Filter Screw Receptacle Filter Box Door Scr, Pan Phil 10-2 x Gasket Nut, Hex Nyl Loc Decal, Filter Plug, Hex Pipe Scr, Hex Hd 5/16-1 x Nut, Hex Nyl Loc 5/ Motor Housing Assembly (#1-1 & 20) Scr, Hex Hd Loc 1/-20 x Foam, 1/2 x x Baffle Weldment Gasket, Motor Vacuum Motor * Carbon Brush Set Scr, Hex Thd Form 1/-20 x Mount Weldment Clamp, Hose SAE # Hose Hose Cord Clamp * = Not Shown

46 E BOOK E LEFT ELECTRICAL PANEL Hydro-Retriever 2052B / CR 1300B FRONT 23 6

47 99- LEFT ELECTRICAL PANEL BOOK E Hydro-Retriever 2052B / CR 1300B E Item Ref. No. Qty Description Left Electrical Panel Assembly Scr,Hex Hd 1/-20x Wsh, Flt Sae 1/ Nut, Hex Nyl Loc 1/ Scr,Hex Hd Loc 1/-20x Scr, Hex Thd Form 6-32 X Scr, Hex Thd Form 10-2 X Stud, 1/ Decal,Circuit Breaker Relay (Low Voltage Cut-Out / K9) TSBUS2003-3, TSBUS Wire Rectifier Assy (Not Shown) Circuit Breaker, 10 Amp (Aux. 2 / F) Circuit Breaker, 5 Amp (Drive Control Circuit / F5) Dual Control Assy (Side Skirt Actuator Control / E & E5) Contactor 36v (Brush Motor / K5) Solenoid, 36v (Broom Motor / K6) Circuit Breaker,0 Amp (Brush Motor / F1) Circuit Breaker,0 Amp (Vac Motor / F2) Bushing, Snap Circuit Breaker, 15 Amp (Aux. 1 / F) Left Panel Harness TSBUS Left Panel Harness TSBUS Boot, Reset Button Boot, Reset Button Cover,Electrical Tray Tray, Electrical Cable Assy (Not Shown) Cable Assy (Not Shown) Cable Assy (Not Shown) Cable Assy (Not Shown) Gasket, 1/16 X 1/2, 52in Standoff, Insulated Diode Assembly TSBUS Washer Sealing Solenoid, 36V (Vac Motor / K) Circuit Breaker,0 Amp (Broom Motor / F3) Relay (Recycle Pump, Hydro-Max II / K) Dual Control Assembly (Brush & Squeegee Lift Actuator Control / E1 & E2) * Harness, Left Panel (2052 before SN1295) * Harness, Left panel (2052 after SN1295 / all CR 1300) * = Not Shown

48 E BOOK E RIGHT ELECTRICAL PANEL Hydro-Retriever 2052B / CR 1300B

49 99- RIGHT ELECTRICAL PANEL BOOK E Hydro-Retriever 2052B / CR 1300B E Right Electrical Panel Assembly (#1-26) Controller Tray Contactor 36VDC (Forward/Reverse / K2 & K3) Bushing Nylon Scr, Hex Thd Form 1/-20 x Angle Forward / Reverse Interlock (E3) Contactor SPST (Main / K1) TSB Thermol Pad Stud Speed Control Scr, Hex Thd Form 10-2 x Cable Assembly Resistor / Diode Assembly (R1) TSB Cable Assembly Fuse, 200 Amp (Wheel Drive Motor / F6) Cable Assembly Cable Assembly Panel Wiring Harness, Right Cable Assembly Cable Assembly Diode Assembly Diode Assembly Cable Assembly Cable Assembly Nut, Hex Nyl Loc-Thin 1/ Washer, Int Shprf 1/ Insulated Standoff Heat Sink Scr, Hex 5/16-1 x.62 * Nut, Hex Nyl Loc-Thin 5/ Bushing, Snap Scr, Hex Thd Form 1/-20 x.50 * Cover, Electrical Enclosure * " Gasket * = Not Shown

50 Hydro-Retriever 2052B / CR 1300B E BOOK E ELECTRICAL DIAGRAM (2052 BEFORE SN1295)

51 ELECTRICAL DIAGRAM (2052 BEFORE SN1295) BOOK E Hydro-Retriever 2052B / CR 1300B E Item Ref. No. Qty Description Item Ref. No. Qty Description A Speed Controller BT1 N/A 1 Battery, 36 V WARNING! D Suppression Diode D Suppression Diode D Suppression Diode D Blocking Diode D Suppression Diode TSBUS D Suppression Diode D Suppression Diode D Blocking Diode D9 1 Suppression Diode E Brush Lift Actuator Control Module E Squeegee Lift Actuator Control Module E Forward / Reverse Interlock E Left Side Skirt Lift Actuator Control Module E Right Side Skirt Lift Actuator Control Module F Brush Motor Circuit Breaker (0A) F Vacuum Motor Circuit Breaker (0A) F Broom Motor Circuit Breaker (0A) F Auxilliary Circuit 1 Circuit Breaker (15A) F Drive Control Circuit Circuit Breaker (5A) F Wheel Drive Motor Fuse (200A) F Auxilliary Circuit 2 Circuit Breaker (10A) F 1 Fuse (1.5A) H1 N/A 1 Recovery Tank Full Light H2 N/A 1 Detergent Tank Empty Light (Hydro-Max II) H Strobe Light * Lens, Amber (for ) * Flash Tube (for ) H Left Headlight Replacement Bulb (for ) H Right Headlight Replacement Bulb (for ) H Horn K Main Contactor K Forward Direction Contactor K Reverse Direction Contactor K N/A 1 Recycle Pump Relay (Hydro-Max II) K Brush Motor Contactor TSBUS K Broom Motor Contactor K Vacuum Motor Contactor K Low Voltage Cut-Out Module K Low Voltage Cut-Out Relay TSBUS2003-3, TSBUS L Solution Solenoid M Broom Motor * Carbon Brush Set M2 N/A 1 Recycle Pump Motor (Hydro-Max II) M Brush Lift Actuator M Brush Motor M Squeegee Lift Actuator * Replacement Plastic Nut * Carbon Brush Set M Vacuum Motor M Wheel Drive Motor * Carbon Brush (set of ) M Left Side Skirt Lift Actuator * Replacement Plastic Nut * Carbon Brush Set M Right Side Skirt Lift Actuator * Replacement Plastic Nut * Carbon Brush Set P Hourmeter P Fuel Gauge, Battery R Resistor 250 Ohm, 5 Watt R Throttle Potentiometer 10K Ohm S Reverse Throttle Switch S Reverse Squeegee Lift Switch S Forward Throttle Switch S Key Switch S Headlight Switch S Vacuum / Squeegee Switch S Brush Switch S N/A 1 Recycle Pump Switch (Hydro-Max II) S Horn Switch S Brush Lift UP Limit Switch S Brush Lift DOWN Limit Switch S12 N/A 1 Vacuum Pressure Switch S Seat Switch S Broom Switch S15 N/A 1 Detergent Tank Float Switch (Hydro-Max II) S16 N/A 1 Solution Tank Float Switch (Hydro-Max II) S1 N/A 1 Recovery Tank Start Float Switch (Hydro-Max II) S1 N/A 1 Recovery Tank Stop Float Switch (Hydro-Max II) S Solution Switch * Battery Connector * Main Wiring Harness * = Not Shown ** = Optional NOTE: The Hydro-Max ll option was not available at time of printing.warning!: Battery weight in excess of 1,5 pounds (669 Kg.) may cause the premature failure of parts including the tires, and may result in decreased stability and control, which could cause personal injury or death and/or property damage. Use of a battery in excess of the weight limit will void the warranty.

52 Hydro-Retriever 2052B / CR 1300B E BOOK E ELECT. DIAGRAM (2052 AFTER SN1295 / ALL CR1300)

53 ELECT.. DIAGRAM (2052 AFTER SN1295 / ALL CR1300) BOOK E Hydro-Retriever 2052B / CR 1300B E Item Ref. No. Qty Description Item Ref. No. Qty Description A Speed Controller BT1 N/A 1 Battery, 36 V WARNING! D Suppression Diode D Suppression Diode D Suppression Diode D Blocking Diode D Suppression Diode TSBUS D Suppression Diode D Suppression Diode D Blocking Diode D9 1 Suppression Diode E Brush Lift Actuator Control Module E Squeegee Lift Actuator Control Module E Forward / Reverse Interlock E Left Side Skirt Lift Actuator Control Module E Right Side Skirt Lift Actuator Control Module F Brush Motor Circuit Breaker (0A) F Vacuum Motor Circuit Breaker (0A) F Broom Motor Circuit Breaker (0A) F Auxilliary Circuit 1 Circuit Breaker (15A) F Drive Control Circuit Circuit Breaker (5A) F Wheel Drive Motor Fuse (200A) F Auxilliary Circuit 2 Circuit Breaker (10A) F 1 Fuse (1.5A) H Detergent Tank Empty Light (Hydro-Max II) H Strobe Light * Lens, Amber (for ) * Flash Tube (for ) H Left Headlight Replacement Bulb (for ) H Right Headlight Replacement Bulb (for ) H Horn K Main Contactor TSB 2 K Forward Direction Contactor K Reverse Direction Contactor K Recycle Pump Relay (Hydro-Max II) K Brush Motor Contactor TSBUS K Broom Motor Contactor K Vacuum Motor Contactor K Low Voltage Cut-Out Module K Low Voltage Cut-Out Relay TSBUS2003-3, TSBUS L Solution Solenoid M Broom Motor * Carbon Brush Set M Recycle Pump Motor (Hydro-Max II) M Brush Lift Actuator M Brush Motor M Squeegee Lift Actuator * Replacement Plastic Nut * Carbon Brush Set M Vacuum Motor M Wheel Drive Motor * Carbon Brush (set of ) M Left Side Skirt Lift Actuator * Replacement Plastic Nut * Carbon Brush Set M Right Side Skirt Lift Actuator * Replacement Plastic Nut * Carbon Brush Set P Hourmeter P Fuel Gauge, Battery R Resistor / Diode Assy TSB 2 R Throttle Potentiometer 10K Ohm S Reverse Throttle Switch S Reverse Squeegee Lift Switch S Forward Throttle Switch S Key Switch S Headlight Switch S Vacuum / Squeegee Switch S Brush Switch S Recycle Pump Switch (Hydro-Max II) S Horn Switch S Brush Lift UP Limit Switch S Brush Lift DOWN Limit Switch S Seat Switch S Broom Switch S Detergent Tank Float Switch (Hydro-Max II) S Solution Tank Float Switch (Hydro-Max II) S Recovery Tank Start Float Switch (Hydro-Max II) S Recovery Tank Stop Float Switch (Hydro-Max II) S Solution Switch * Battery Connector * Main Wiring Harness * Seat Switch Wiring Harness * = Not Shown ** = Optional WARNING!: Battery weight in excess of 1,5 pounds (669 Kg.) may cause the premature failure of parts including the tires, and may result in decreased stability and control, which could cause personal injury or death and/or property damage. Use of a battery in excess of the weight limit will void the warranty.