VacRide 3400, 3400C. PARTS LIST Advance MODELS , /09 revised 8/11 FORM NO

Size: px

Start display at page:

Download "VacRide 3400, 3400C. PARTS LIST Advance MODELS , /09 revised 8/11 FORM NO"

Samuel Arron Joseph
6 years ago
Views:

1 PARTS LIST Advance MODELS , /09 revised 8/11

3 09-10 TABLE OF CONTENTS DESCRIPTION PAGE Chassis Decal System Deck System Electrical System Front Wheel Assembly Onboard Charger Assembly Recovery System Side Broom System Solution System Steering Column Assembly Vacuum Fan Assembly Ladder Diagram Optional Kits and Accessories... 6 WHEN ORDERING PARTS * Use the part numbers from the Ref. No. columns in this parts list. * Specify the model and serial number of the machine. * Use the space below to record the model and serial number for future reference. Model Serial No.

4 CHASSIS SYSTEM A A

5 09-10 CHASSIS SYSTEM Item Ref. No. Qty Description Wsh-Flt Sae 1/ Wsh, Flt Sae 5/ Wsh, Flt Sae # Scr, Hex 5/16-18 X Scr, Flt Phil 5/16-18 X Pin, Cotter 1/8 X Scr, Hex 5/16-18 X Nut, Hex Nyl Loc 5/ Nut, Hex Nyl Loc-Thin 5/ Rivet, Nylon Tree Push-In (.5) Ring, Ret Ext Type E 0.50 Dia Scr, Hex Loc M X 35mm Scr, Hex Loc M X 0mm Pin, Clevis.375 X Pin, Ring.50 X Scr, Soc Shd.38 X.5 X 5/ Wsh, Int Shprf # Scr, Hex Thd Form 10- X Nut, Hex Jam 1/ Grommet Turnbuckle Bushing.3x.50x Knob Wsh, Flt.06 X 1.5 X Bushing Wheel, Roller Horn/Backup Alarm (H) Bearing, Flange Cylinder, Gas Clip, Conduit Lift Lever Weldment Wheel Pin Ground Chain Chassis Weldment Linkage Weldment Wire Rope Assy Wire Rope Assy Roller Brkt Skirt - Left Skirt - Right S Hook Pin, Cotter Hair Bushing Grommet

6 DECAL SYSTEM

7 09-10 DECAL SYSTEM Item Ref. No. Qty Description Decal, Caution Decal, Wand Decal-Advance Decal, Circuit Breaker Decal-Battery Wiring Decal Decal - Instruction Decal - Hepa Decal Vacride Decal-HEPA Warning

8 6 DECK SYSTEM ROTATION 31 ROTATION

9 09-10 DECK SYSTEM Item Ref. No. Qty Description Wsh, Flt Sae # Scr, Hex 5/16-18 X Scr, Pan Phil 10- X Scr, Soc Set Loc 5/16-18 X Wsh, Flt Sae 1/ Scr, Pan Phil 1/-0 X Scr, Hex 5/16-18 X Nut, Hex Nyl Loc 5/ Nut, Hex Nyl Loc 1/ Nut, Hex Nyl Loc Nut, Hex Nyl Loc-Thin 1/ Scr,Hex Hd Loc 1/-0x Scr, Pan Phil -0 X Scr, Pan Phil Thd Form 1/-0 X Wsh, Int Shprf # Scr, Hex Thd Form 10- X Scr, Pan Phil Thd Form 10- X Wsh, Int Shprf 5/ Scr, Pan Phil Thd Form-Blk 10- X Wsh, Flt.3 X.938 X Scr, Button Soc 1/-0 X Carpet Magnet Belt, Poly V Motor- Vdc.5 Hp 1800 Rpm (M7,M8) TSBUS [ ] Motor Brush/Spring Kit NOTE [ ] Motor Brush/Spring Kit NOTE Sheave, Poly-V Insulator, Terminal Up Stop Mount Plug-Cap Tube Intake Housing Weldment Brush Assembly NOTE 1 [ ] Bearing, Block (Drive End) [ ] Bearing, Block (Idler End) Deck Bracket Weldment Tube-Duct Cover Pulley Gasket Intake Clamping Bar Bumper Cover Belt Plate - Motor Strap Defl ector - Rear Divider Plate Assembly Caster 5660 T-Knob Assembly Carpet Magnet Plug, Cap [ ] = Not Shown NOTE 1: Cannot use any other brushes. NOTE : If your cylindrical scrub motor has a serial tag from Scott Motors Co. order Brush / Spring Kit If your cylindrical scrub motor has a serial tag from Nilfi sk-advance order Brush / Spring Kit

10 8 ELECTRICAL SYSTEM

11 09-10 ELECTRICAL SYSTEM Item Ref. No. Qty Description Scr, Flt Phil 10- X Scr, Pan Phil 1/-0 X Scr, Pan Phil 8-3 X Scr, Pan Phil Thd Form 6-3 X Nut, Hex W/ Shprf 1/ Nut, Hex Nyl Loc-Thin 1/ Wsh, Flt Sae Ss 1/ Scr, Pan Phil 1/-0 X Scr, Hex Thd Form 10- X Stud Wsh, Flt Ss.60 X X Stud, 1/ Spacer, Phenolic Grommet Circuit Breaker, 5 Amp (CB3) Boot, Battery Post Relay,Spst, v (K) Disconnect, Emergency (S) Cable,Battery Fuse, 150 Amp (F1) Contactor, Vdc (K1) Circuit Breaker, 70 Amp (CB) Boot, Reset Button Electrical Mount Tie, Cable Tie, Cable Circuit Breaker, 10 Amp (CB1) Controller, Speed (A) Connector Assy Connector Assy [ ] Harness, Traction Drive Contactor v, 100 Amp (K,K3) Prop Rod, Seat Gasket Gasket [ ] Cable Assembly Emergency Button Guard Foam Insert [ ] Harness Main Panel Electric Panel Interface Panel Assembly (A1) [ ] Kit, Interface Panel [ ] Ket Switch (S1) [ ] A/R Replacement Key Set Plug, Cap Scr, Flt Phil 1/-0 X Scr, PanPhil Thd Form 10- X Clamp-P [ ] = Not Shown

12 10 FRONT WHEEL ASSEMBLY h 15d f a SEE NOTE 1 15i 3 ALUMINUM CASTING (NOT AVAILABLE) 16 GEAR BOX (NOT AVAILABLE) 15 BRACKET (NOT AVAILABLE) 15c 15b 15e 15g

13 09-10 FRONT WHEEL ASSEMBLY Item Ref. No. Qty Description Scr, Soc Hd 5/16-18 X Scr, Hex 1/-0 X Nut, Hex Nyl Loc-Thin 5/ Nut, Hex Nyl Loc-Thin 1/ Scr,Hex Hd Loc 3/8-16x Nut, Hex Nyl Loc-Thin Scr, Hex M X 0mm Bearing Cup Bearing Cone Seal,Shaft Bushing Block, Bearing Bearing Ball Clamp-P Motor / Drive Wheel (M1) 15a Kit, Drive Motor Tire W/Hub 15b Replacement Motor, Drive Motor 15c Tire 15d Carbon Brush Kit 15e Brake, Electromagnetic (Y1) 15f Tire Puller Kit 15g Drive Motor Cover 15h Kit-Brake Lever 15i Cover Gearbox Motor Spindle Weldt Plate, Steering [ ] = Not Shown

14 1 ONBOARD CHARGER ASSEMBLY

15 09-10 ONBOARD CHARGER ASSEMBLY 13 Item Ref. No. Qty Description Onboard Charger Assembly NOTE 1 / TSBUS Scr, Hex 1/-0 X Scr, Hex 1/-0 X Scr, Hex Thd Form 1/-0 X Grommet Clamp,P Charger, On-Board v Charger Cord, Us Charger Mount Bracket Cable Tie NOTE 1: Standard on the following models:

16 RECOVERY SYSTEM

17 RECOVERY SYSTEM 15 Item Ref. No. Qty Description Scr, Soc Set Loc 10- X Wsh, Flt SAE # Scr, Pan Phil 10- X Scr, Hex Thd To Hd 5/16-18 X Nut, Hex Nyl Loc Scr, Flt Phil 6-3 X Scr, Pan Phil 1/-0 X Nut, Hex Nyl Loc-Thin 1/ Nut, Hex Nyl Loc-Thin Wsh- Flt SS.30 X X Wsh, Flt.66 X.906 X Nut, Hex Machine Scr, Pan Phil Plastite 10-1 X Washer, Sealing Lever Wire Rope-.06 Dia x 10.5L Spring Ext Tank Vacuum Cover Filter Vacuum Diverter Assy Weldment Vac Tank Cover Fitting Vacuum Hose Filter Bracket Spring Mount Bracket Panel Item Ref. No. Qty Description Vac Wand With Hose [ ] Handle Wand [ ] Wand Plastic [ ] Hose Latch - Snap Down Panel Skirt - Rear Elbow Gasket Gasket Retainer Knob Hinge Bracket Disposable Bag - 6 Pack Gasket Gasket Gasket Flap Magnet Gasket Filter Hepa Spacer, Phenolic Gasket Foam Pad Bracket-Support Scr, Flt Phil ¼ -0 x.75 [ ] = Not Shown

18 16 SIDE BROOM SYSTEM

19 09-10 SIDE BROOM SYSTEM Item Ref. No. Qty Description Wave Washer 5/6 X 1 X 1/ Scr, Hex 1/-0 X Wsh-Flt Sae 1/ Wsh, Flt Sae 5/ Wsh, Flt Sae # Scr, Pan Phil Thd Form ¼ -0 X Wsh, Flt Sae 3/ Wsh, Flt Sae 1/ Nut, Hex Nyl Loc-Thin 5/ Scr, Pan Phil 10- X Nut, Hex Nyl Loc M Scr, Hex M X 35mm Scr, Hex M5-0.8 X 0mm Scr, Hex Loc M6-1 X 16mm Scr, Soc Shd.38 X.5 X 5/ Scr, Pan Phil Thd Form-Blk 10- X Nut, Hex Jam 5/ Sensor, Proximity (S7) Bearing, Flange Cable Assy Gas Spring Bracket Rod-Threaded Knob Sidebroom Arm Weldment Catch Pin Bushing.3 X.50 X Strap Lock Brush Sidebroom NOTE Hub Weldment - Brush Drive Bumper - Sidebroom Strap Spring, Extension Key Reduction Gearmotor 90 Right/v (M9) [ ] Brush Carbon W/Cover Nut, Hex Nyl Loc-Thin 10- [ ] = Not Shown NOTE 1: Cannot use any other brush.

20 18 SOLUTION SYSTEM SEAT PANEL BOTTOM VIEW

21 09-10 SOLUTION SYSTEM Item Ref. No. Qty Description Wsh, Flt Sae # Scr, Pan Phil 10- X Wsh, Flt Sae 1/ Scr, Pan Phil 1/-0 X Scr, Hex 5/16-18 X Nut, Hex Nyl Loc 1/ Nut, Hex Nyl Loc-Thin Scr, Pan Phil Thd Form 10- X Wsh, Flt.3 X.938 X Scr, Pan Phil Plastite 10-1 X Sensor, Proximity (S5) Grommet Latch, 1/ Turn Retainer Nut, Clamp Clamp, P Clip, Conduit Battery Box Mat Charger Cover Weldment Electrical Cover Panel Plate Gasket Gasket Weldment - L Bracket Gasket Handle Cover Weld t Solution Tank Tube Weldment Panel Accessory Handle Cover-Top Panel Bracket - Handle Hose Assembly Hose Assembly Wsh, Flt Sae 1/ Scr, Pan Phil 1/-0 X Scr, Pan Phil 1/-0 X Nut, Hex Nyl Loc 1/ Scr, Soc Shd.38 X.5 X 5/ Clip, Conduit Footpedal Assy (R1) Knob, 5/16 Stud Footpedal Plate Seat Panel Weldment Bracket Pad-Panel Seat Switch (S) Wsh, Flt Sae 3/ Tie, Cable Ratchet Lock Band

22 0 STEERING COLUMN ASSEMBLY

23 09-10 STEERING COLUMN ASSEMBLY Item Ref. No. Qty Description Wsh-Flt Sae 1/ Wsh, Flt Sae 5/ Wsh, Flt Sae 3/ Scr, Soc Set Loc 5/16-18 X Nut, Hex Nyl Loc-Thin 1/ Scr,Hex Hd Loc 1/-0x Scr, Soc Set Loc 3/8-16 X Scr, Hex Thd To Hd M8-1.5 X 0mm Scr, Hex Thd To Hd M X 5mm Key, Wdf.6 X Key, Wdf.75 X Ring, Ret Ext Type E 0.31 Dia Ring, Ret Ext Type E Reinf. 0.5 Dia Nut, Hex Nyl Loc M Scr, Pan Phil Thd Form 8-3 X Scr, Pan Phil Thd Form 1/-0 X Bushing Bearing, Flange Bushing.3x.50x Plug - Cap Knob Collar, Shaft Chain, Roller Bearing, Flange.65 X.500 X Ratchet, Steering Column Universal Joint Sprocket Spring, Compression Steering Wheel Column Weldment Upper Column Weldment Shaft,Lower Steering Shaft,Upper Steering Steering Pawl Weldment Pull Lever Shroud, Lower Column Boot, Steering

24 VACUUM FAN ASSEMBLY

25 09-10 VACUUM FAN ASSEMBLY Item Ref. No. Qty Description Scr, Pan Phil 1/-0 X Scr, Pan Phil 1/-0 X Nut, Hex Nyl Loc-Thin 1/ Scr, Hex Type 5 1/-1 X Scr, Pan Phil Plastite 10-1 X Gasket Gasket, Vacuum Duct Gasket, Vacuum Duct Gasket, Vac Tie, Cable Motor, Vac vdc (M6) [ ] Carbon Brush Set Of Cover Vac Motor Motor Vac v Tang (M5) [ ] Carbon Brush Set Of Panel Vac Cover Vac Panel Switch Vacuum (S3) Flapper Strap Foam Tube Assy Gasket Filter 9695 Screw, X 1, P.H. Hi-Lo Wsh, Flt.193 X.875 X Bushing Foam Pad [ ] = Not Shown

26 LADDER DIAGRAM F1 BAT 1 CB H1 CB1 S1 S S Y1 K1 K A M1 K3 M K R1 H A1 S3 S7 S5 P3 K M5 K3 K1 M6 M7 CB3 K M8 M9

27 09-10 LADDER DIAGRAM Item Ref. No. Qty Description A Interface Panel Assembly A Controller, Speed BAT N/A Battery CB Circuit Breaker, 10 Amp CB Circuit Breaker, 70 Amp CB Circuit Breaker, 5 Amp F Fuse, 150 Amp H Beacon, Warning (optional) H Horn/Backup Alarm K Contactor, Vdc K Contactor v, 100 Amp K Contactor v, 100 Amp K Relay,Spst, v M Motor / Drive Wheel M Motor Vac v Tang M Motor, Vac vdc M Motor- Vdc.5 Hp 1800 Rpm TSBUS M Motor- Vdc.5 Hp 1800 Rpm TSBUS M Reduction Gearmotor 90 Right/v R1 N/A 1 Part of Footpedal Assy S Ket Switch S Switch S Disconnect, Emergency S Sensor, Proximity S7# Sensor, Proximity Y Brake, Electromagnetic Charger, On-Board v TSBUS # = Revised or new since last update

28 6 OPTIONAL KITS AND ACCESSORIES Item Ref. No. Qty Description Kits * Kit-Battery Fill Indicator * Kit-Seat Armrests * Kit-Warning Beacon * Kit-Vacuum Wand With Caddy * Kit-Seat Belt * Battery Watering Kit * Kit-Hour Meter * Quiq Programmer Kit * Kit, Battery Roll Out * Interface Panel Kit * Bag Cloth NOTE 1 * Clip Bag NOTE 1 * Disposable Bag 6 Pack Replacement parts for the kits listed above can be found on each kit s associated instruction sheet. Brushes * Brush Assembly * Brush Sidebroom Optional Batteries * Battery, 6V, 305A/H TSBUS * Battery, 6V, 315A/H AGM TSBUS * Battery, 6V, 395A/H TSBUS Optional Battery Chargers * A/R Battery Charger, VDC, Auto, 5Amp, 10VAC/60HZ TSBUS * 5617 A/R Battery Charger, VDC, Auto, 36Amp, 10VAC/60HZ TSBUS * A/R Battery Charger, VDC, 0Amp, 30VAC/50HZ TSBUS * A/R Battery Charger, VDC, 0Amp, 30VAC/50HZ TSBUS * A/R Kit, On Board Charger, US TSBUS Accessories * A/R Programmer, 1311 User * A/R Programmer Cable *# Literature Pack * = Optional, Not Included # = Revised or new since last update NOTE 1: One Bag Clip, part no , is required for use with Cloth Bag, part no

32 Nilfi sk-advance Equipamentos de Limpeza Ltda. Av. Dep. Emílio Carlos,.99 - Bairro do Limão São Paulo - SP - Brasil sk-advance.ind.br Tel.: (11) Fax: (11) Nilfi sk-advance, Inc st Avenue North Plymouth, MN Phone: Fax: Nilfi sk-advance, Inc. A Nilfisk-Advance Brand

Advolution 2710 UHR

Advolution 2710 UHR 70-1700 PARTS LIST Advance MODELS 56422000, 56422002, 56422184 Nilfisk MODEL 56422001 3/06 revised 8/08 SECTION 5.9.1 06-3 TABLE OF CONTENTS Advolution 2710 / UHR 70-1700 D 5.9.1 1