ILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS:

Transcription

1 IPL MODEL SWZU ILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: SWZU6-1KA with a serial number of to 26 SWZU8-1KA with a serial number of to 2 SWZU2-1KA with a serial number of to 28 JUNE, 1 PART NUMBER 060

2 NOTES

3 TABLE OF CONTENTS SUBJECT PAGE Illustrated Parts List SWMU-6"Cutter Deck SWMU-8", 2"Cutter Decks... - Cutter Deck Frame 6" Cutter Deck Frame 8" and 2" Engine Deck... - Drive And Brake Components Handle Assembly Hydraulic Assembly Hydraulic Pump Assembly Engine Deck Wire Harness-1 & 1KA Handle Wire Harness Replacement Decals Lubrication & Maintenance... 2 Technical Specifcations MEMBER Equipment & Engine Training Council WE SUPPORT OPE TECHNICIAN CERTIFICATION 1

4 2 To"A" "A" A SWZU00CD " CUTTER DECKS

5 6" CUTTER DECKS Ref. Part No. Number Description 1 62 Cutter Deck (Includes Decals) Capscrew, /8- x 1.0" Serrated Flange Hex Hd 228 Bracket, Anti-Scalp Wheel Lock Nut, /8- Center Lock 80-1 Bushing, 6 ID Oilite 6 82 Wheel, Anti-Scalp (Incl. Item ) Bolt, Carriage /8- x.0" 8 88 Pin Assy., Deck Adj. (Incl. Items & ) 12 Spacer, Deck Adjustment Pin 81 Rod End, Male /8-2 RH Thread Nut, /8-2 Jam Spindle Assembly Nut, /- Serrated Flange Key,1/ x 1/ x 2.0" Bolt, Hex Head /- x 1.2" 0 Spacer, Spindle Flatwasher, /8 W Bolt, Hex Head /8- x.0" Cutter Blade " (marbane) 81 Cutter Blade " Hi Lift (marbane) Spindle Shaft Seal, Cutter Spindle Top Tapered Bearing Set (Two Bearings W/Race) Grease Fitting 2 86 Relief Fitting, Cutter Spindle 2 2 Spindle Housing Spacer, Outside 2 26 Spacer, Inside Seal, Cutter Spindle Bottom 2 2 Spindle Bushing 0 8 Nut, Spindle Belt Cover, LH Wing Nut, /8- Ref. Part No. Number Description Nut, /8- Elastic Stop 00-0 U-Nut, / Bolt, Hex Head /8- x 2.0" 6 1 Pin, Deck Adj. Rear Pin, Sloted Spring / x 1.0" Guide, Roller Bolt, Hex Head /- x 1.0" 0 Roller Shaft Tapered Hub 2 82 Pulley 880 Belt, Cutter Deck Capscrew, Socket Head. 1/-20 x 1." Hex Nut, / Spring, Chute Return Hex Nut, /- Elastic Stop Hex Nut, /8- Elastic Stop 00-0 Flatwasher, /8 (.8 x.1 x.) Nut, /8- Serrated Flange 1 6 Discharge Chute Capscrew, Hex Head /8- x." Capscrew, Hex Head /8- x 1.0" Pivot, Idler - Long Capscrew, Hex Head 8/ x.2" Base, Idler Pivot Bolt, Carriage /- x 1.0" 8 6 Idler Arm Weldment 822 Ball Bearing Bolt, Hex Head /- x.2" Belt Cover, RH Spring, Deck Idler 6 80 Pulley, Idler 6 22 Heatshield * Common hardware which should be purchased locally. All bolts are Grade plated, all other fasteners zinc plated.

6 To"B" To "C" To"A" "A" "B" "C" To "D" "D" SWZU00CD8& A " & 2" CUTTER DECKS

7 8" & 2" CUTTER DECKS Ref. Part Ref. Part No. No. Description 8 2 No. No. Description Cutter Deck with Decals x 612 Cutter Deck with Decals x Capscrew, /8- x 1.0" Serr. Flg. x x Lock Nut, /8- Center Lock x x 80-1 Bushing, 6 ID Oilite x x 82 Wheel, Anti-Scalp x x Bracket, Anti-Scalp Wheel x x Bolt, Carriage /8- x.0" x x Hex Nut, /8- Elastic Stop x x 00-0 Flatwasher, /8 (.8 x.1 x.) x x 822 Ball Bearings x x 6 Idler Arm RH x x 12 0 Pivot, Idle - Short x x Bolt, Carriage /- x 1.0" x x Base, Idler Pivot x x Capscrew, Hex Head /8- x 2.0" x x Capscrew, Hex Head /8- x 2.0" x x Capscrew, Hex Head /8- x 1.0" x x Nut, /8- Serrated Flange x x 1 81 Pulley, Idler x x Pin Assembly (Incl. 21 & 2) x x Nut, /8-2 Jam x x Spacer, Deck Adjustment Pin x x 2 81 Rod End, Male /8-2 x x Spindle Assembly x x 2 0 Spacer, Spindle x x Bolt,Hex Head /8- x.0" x x Flatwasher, /8 W x x Cutter Blade -1/2" (marbane) x 81 Cutter Blade -1/2" Hi Lift (marbane) x 810 Cutter Blade " (marbane) x 81 Cutter Blade " Hi Lift (marbane) x Bolt, Hex Head /- x 1.2" x x 0 28 Spindle Shaft x x 1 82 Seal, Cutter Spindle - Top x x Tapered Bearings (Two) x x 8-0 Grease Fitting x x 2 Spindle Housing x x 86 Relief Fitting, Cutter Spindle x x 6 12 Spacer Outside x x 26 Spacer, Inside x x 8 82 Seal, Cutter Spindle - Bottom x x 2 Spindle Bushing x x 0 8 Nut, Spindle x x Wing Nut, /8- x x 2 Roller Shaft x x Bolt, Hex Head /- x 1.0" x x Pin, Slotted Spring / x 1.0" x x 1 Pin, Deck Adjustment Rear x x Tapered Hub x x 808 Guide, Roller x x 8 82 Pulley x x 82 Pulley,. Double Groove x x Belt, Deck Drive x 8122 Belt, Deck Drive x Capscrew, Sckt. Hd. 1/-20 x 1." x x Hex Nut, /8- x x 808 Belt, Cutter Deck x 828 Belt, Cutter Deck x 22 Belt Cover, RH x x Capscrew, Hex Head /8- x.2" x x 6 6 Idler Arm Weldment x x Capscrew, Hex Head /8- x." x x 8 6 Discharge Chute x x Nut, /- Serrated Flange x x Spring, Deck Idler x x Bolt, Hex Head /- x.2" x x Spring, Chute Return x x Nut, /8- Elastic Stop x x Nut, /- Serrated Flange x x Bolt, Hex Head /8- x 2.0" x x Key, 1/ x 1/ x 2.0" x x 6 80 Pulley, Idler x x 68 Pivot, Idler - Long x x 6 22 Belt Cover LH x x U-Nut, /8- x x 1 22 Heatshield x 2288 Heatshield x * Common hardware which should be purchased locally. All bolts are Grade plated, all other fasteners zinc plated.

8 6" Deck Frame 6" DECK FRAME SWUDF6 6

9 6" DECK FRAME Ref. Part No. No. Description 1 60 Belt Cover With Decal Knob With Stud Knob, Deck Cover Mounting Bushing, Caster Frame Weldment, Deck Mounting - 6" Hair Pin Cotter,.1 x.2" 8-0 Grease Fitting Str. 1/-28 Self Tap Quick Pin.8 Dia Nut, Push-On - /8 Thd Flatwasher, /8 - (.1 x.8 x.) Nut, /8- Serrated Flange Hex Head 12 2 Yoke, Caster Wheel Capscrew, Hex Head 1/2-1 x 6.0" Locknut, 1/2-1 Elastic Stop 1 8 Wheel Assembly, Caster 8 Tire, x Retainer 86 Roller Bearing 1 8 Rim,.0 x 2. With Zerk & Valve Grease Fitting Str.1/ Roller Bearing.62 x.2" Capscrew, Hex Head /8- x 2.2" 2 * Tire Valve, Purchase Locally Retaining Ring 1.0 Ext. 2 0 Bushing, Deck Adjustment Pin Capscrew, Hex Head /-1 x 1.0" Nut, /-1 Serrated Flange Hex U-Nut, /8-2 Sleeve, Caster Wheel Flatwasher, /8 - (.688 x 1. x.1) * Common hardware which should be purchased locally. All bolts are Grade plated, all other fasteners zinc plated.

10 8" & 2" DECK FRAME 8" Deck Frame SWUDF8 8

11 8" & 2" DECK FRAME Ref. Part No. No. Description Belt Cover With Decal x 612 Belt Cover With Decal x Knob With Stud x x Knob, Deck Cover Mounting x x 6 Bushing, Caster x x 8 Frame Weldment, Deck Mounting - 8" x Frame Weldment, Deck Mounting - 2" x Grease Fitting Str. 1/-28 Self Tap x x Quick Pin,.8 Dia x x Nut, Push-On - /8 Thd. x x Flatwasher, /8 (.1 x.8 x.) x x Nut, /8- Serrated Flange Hex Head x x 2 Yoke, Caster Wheel x x Capscrew, Hex Head 1/2-1 x 6.0" x x Locknut, 1/2-1 Elastic Stop x x 1 8 Wheel Assembly, Caster x x 1 8 Tire, x.00- x x 810 Retainer x x 1 86 Roller Bearing x x 8 Rim,.0 x 2. With Zerk & Valve x x Grease Fitting Str.1/-28 x x 20 8 Roller Bearing.62 x.2" x x 21 * Tire Valve, Purchase Locally x x Hair Pin Cotter,.1 x.2" x x Retaining Ring 1.0 Ext. x x 2 0 Bushing, Deck Adjustment Pin x x Capscrew, Hex Head /-1 x 1.0" x x Nut, /-1 Serrated Flange Hex x x U-Nut, /8- x x Capscrew, Hex Head /8- x 2.2" x x 2 Sleeve, Caster Wheel x x Flatwasher, /8 - (.688 x 1. x.1) x x * Common hardware which should be purchased locally. All bolts are Grade plated, all other fasteners zinc plated.

12 ENGINE DECK S08

13 ENGINE DECK Ref. Part No. No. Description 1KA 1KA Engine, 1KA Kawasaki x 8 Engine, 1KA Kawasaki x Bolt, Hex Head M8-1.2 x mm x x Hex Nut, 1/-20 x x 00- Screw, 1/-20 x 2" Rnd. Hd Phillips x x 212 Strap, Fuel Tank x x 6 80 Cap, Fuel Tank x x 822 Pad, Rubber-Fuel Tank Upper x x Fuel Tank Assembly (Includes Items, ) x x 80 Bushing x x 808 Valve, Fuel Shut-Off x x Clamp, Fuel Hose x x Fuel Hose, 1/ I.D. x 20" x x Cable Tie x x Fuel Filter x x 1 81 Fuel Hose, /2 I.D. x." x x Nut, Hex Elastic Stop /- x x Wire Harness Adapter x x Flat Washer, 1" x x Bolt, Carriage /- x 1" x x Lock Washer, /" x x Lock Washer, /" Int. Tooth x x Capscrew, Hex Serrated Flange /- x 1." x x Bolt, Hex Head M8-1.2 x 0mm x x Nut, Hex Elastic Stop 1/-20 x x Pad, Rubber-Fuel Tank Lower x x Engine Deck, " Wide W/Decals x x Bolt, Hex Head 1/-20 x 1.2" x x Nut, Hex Serrated Flange 1/-20 x x Capscrew, Hex Serrated Flange /- x 1.2" x x Clamp x x Clutch Bracket x x Bolt, Hex Head /- x." x x * Common hardware which should be purchased locally. All bolts are Grade plated, all other fasteners zinc plated.

14 12 DRIVE AND BRAKE COMPONENTS A A 1 0S A A

15 DRIVE AND BRAKE COMPONENTS Ref. Part No. No. Description 1KH 1KA Retaining Ring, /" Ext. E X X Bolt, Hex Head /8- x 1" X X 82 Brake Shaft Assembly Weldment X X Hair Pin, Cotter (.0 x 1.62) X X Bolt, Carriage /- x." X X Brake Rod, Lower X X Nut, Hex Serrated Flange /8- X X 8 1 Bushing, Brake X X 8-0 Grease Fitting X X 860 Brake Actuator Weldment, LH X X 861 Brake Actuator Weldment, RH X X Bolt, Hex Head /8- x 2.2" X X Tire, x 8.0-8, Ply X X Rim Assembly X X Lockwasher, Wheel Motor X X 1 86 Nut, Hex Castle /-28 X X Nut, Lug X X 1 86 Wheel Assembly (#12 tire mounted to #1 rim) X X 2221 Brake Drum X X /2-20 Serrated Bolt X X Hub, Wheel X X Brake Band,." X X Key, Woodruff / x." X X 2 81 Wheel Motor X X 2 8 Belt, Pump Drive X X 2 6 Electric Clutch X X Flatwasher, /" (.6 x 1. x.2) X X Lockwasher, /" Spring X X Bolt, Hex Head M-1. x 6mm X Bolt, Hex Head /-20 x 2." X 2 22 Plate, Backing X X Clamp, Wire Loom X X Nut, Hex Elastic Stop /- X X 2 81 Rubber Pad, Clutch Stop X X 22 Retainer, Clutch Stop X X Bolt, Hex Head /- x 1." X X 81 Pulley, Pump Drive-Engine X X Bolt, Hex Head /8- x 2." X X Nut, Hex Serrated Flange 1/-20 X X 8 8 Chain X X Bolt, Hex Head 1/-20 x 1.2" X X Nut, Hex Elastic Stop /8- X X 1 8 Spring, Pump Belt Idler X X Nut, Hex Serrated Flange /- X X Key, 1/ x 1/ x 1" X X Key, 1/ x 1/ x 2." X X 00-0 Flatwasher, /8" (.1 x.8 x.) X X 6 8 Pulley, Idler." X X 886 Pulley, Pump Shaft X X Setscrew, /- x /8" X X Lockwasher, /8" Spring X X Key, mm x mm x 2mm X X Base, Idler Pivot X X 2 02 Swivel Joint X X 0 Idler Arm Weldment, Pump X X Bolt, Hex Head /8- x." X X Locknut, /8- Center Lock X X Bolt, Hex Head /8- x " X X 0 Pivot, Idler (Long) X X Ball Bearings X X 86 Ring, Split X X Bolt, Hex Head /8- x 2.6 X X Spring, Return X X 1

16 1 8 HANDLE ASSEMBLY SWZU00HA A A 20 REF B B C C

17 HANDLE ASSEMBLY Ref. Part No. No. Description 1KH 1KA Upper Handle Wlmt. W/Decals x x 2 26 Quadrant, Speed Control x x Hairpin,.0 x 1.1 x x 282 Lever, Speed Adjustment x x 086 Bushing, Speed Adjustment Lever x x 6 * Hex Head Bolt, /8- x 1." x x 8-01 Ball Plunger x x Knob, Speed Adjustment x x Capscrew, 1/-20 x /" FHHS x x Nut, 1/-20 Elastic Stop x x Nut, /- Elastic Stop x x 12 * Screw, #-2 x 1/2" PW HD x x 1 86 Throttle Control x x Nut, #-2 Serr. Flange x x Bushing x x 2 Handle, Oper. Presence-RH x x Handle, Oper. Presence-LH x x 1 88 Switch, Elec. Clutch Eng. (incl.nut) x x 86 Wire Harness, Manual Start x x Key Switch, Manual Srt. (incl. Hdw) x x Neutral Latch-RH x x 6122 Neutral Latch-LH x x Switch, Neutral Interlock x x Grip x x Washer, Curved Spring x x 2 * Flat Washer x x Nut, /- Elastic Stop x x 26 * Hex Head Bolt, /- x 2" x x 2 * Hex Hd. Bolt, /- x 2." x x Lever, Steering Control (incl. 2) x x 2 81 Grip, Steering Control x x 0 1 Rod, Steering Control x x 1 81 Spring, Handle Return x x 2 * Capscr., /8- x 1" Ser. Flange x x 866 Spring x x Nut, /8- Serr. Flange x x 01 Rod Speed Control x x 6 0 Bellcrank, Speed Control x x * Setscrew, 1/-28 x.2" x x 8 6 Cam, Speed Control (incl. SS) x x 6 Jackshaft, Speed Control x x Key, 1/8 x 1/2" Woodruff x x 1 * Roll Pin, /-. x x 2 * Nut, Elastic Stop /8- x x 822 Flange, Bearing x x * Capscrew, /- x 1" Serr. Flg. x x Nut, /- Serrated Flange x x 6 22 Plate, Side x x 6 Support, Neutral Support x x 8 80 Bearing, Speed Ctrl. Bellcrank x x * Hex Head Bolt, /- x 1-/" x x Spring, Return x x 1 22 Spacer, Side Plate x x S Flat Wshr., /-.66 x 1.2 x.0 x x Key, Woodruff, / x." x x Ref. Part No. No. Description 1KH 1KA Bolt, Hex Head, 1/-20 x 1.2 x x * HH Bolt,/- x." x x Lock Washer, / x x Clip, Retaining.0 diameter x x Bearing, Ball Neutral Return x x 6 Cam, Neutral (incl. grease ftng.) x x Grease Fitting, 1/-28 UNF x x Retaining Ring, /8 Ext. "E" x x 62 * Hex Head Bolt, /- x 1" x x 6 Lever, Speed Control x x 6 * Bolt, Serr. Flange 1/-20 x." x x Stud, /8-x. x x Flat Wshr., 1/ x.06 x 12 ga x x 6 By Ref. Deck, Engine x x Hex Head Bolt, /- x 1.2" x x 6 82 Choke Control x x Bolt, Hex Head /8- x.2" x x 1 21 Fuse Holder x x 2 20 Swivel Joint, Steering Rod x x Bushing x x 828 Blade Fuse, 20A x x Nut, #-2 Elastic Stop x x 6 * Screw, #-2 x 1." Phillips x x Lockwasher, 1/" x x 8 02 Swivel Joint x x 12 Rod, Brake Lever x x Hex Hd. Bolt, /8- x 1." x x Switch, Parking Brake x x Nut, /8- Elastic Stop x x Plate, Threaded x x 8 * Bolt, 1/-20 x." x x Spacer x x 86 6 Parking Brake Lever with Grip x x 8 8 Switch, Safety x x Nut, /8-2 x x 8 81 Bushing, Bearing Retainer x x Bearing, Neutral Lock x x 1 82 Grip, Parking Brake x x 2 86 Ball Joint, RH Thread x x Hairpin,.0 x 1.62" x x 822 Bracket, Choke Mtg. x x 126 Rod, Lower Brake x x Plate, Coupler x x 1 Shaft, Pump Control x x 8 8 Spring x x 88-0 Knob, Tracking Adjustment x x Block, Pump Control x x 1 26 Control, LH (inc. bush. & decal) x x 2 Control, RH (inc. bush. & decal) x x Wire Loom x 1 Bushing x x Bolt, Hex Head /8-x1. x x * Common hardware which should be purchased locally. All bolts are Grade plated, all other fasteners zinc plated. 1

18 HYDRAULIC ASSEMBLY B E D D A E C C F G J H H J B A S011 G F 6 2

19 HYDRAULIC ASSEMBLY Ref. Part No. Number Description 1KH 1KA 1 86 Cap, Oil Reservoir x x Oil Reservoir (With Fittings) x x 80-0 Elbow, 0 deg. /-20 x /- x x 8-02 Coupling, /-20 SAE Flare Swivel to 1/" Hose Push On x x 882 Hose, 1/" ID - " Long (Order By The Inch) x x Elbow, 0 deg. /-20 JIC to /- "O" Ring x x O-Ring x x 8 ** Pump, Hydro-Gear BDP-L x x 000- Bolt, Carriage, /8- x 1.2" x x 8126 Hose, Pump to Wheel Motor x x O-Ring x x Elbow, 0 deg., 1/2 NPT x x Hose, 1/" ID - " Long (Order By The Inch) x x Oil Filter Base x x Elbow, 0 deg. 1/2" NPT x x 22 Strap, Hydraulic Tank x x Coupling, /- SAE to 1/2" Hose Push On x x 001- Capscrew, /- x." Serr. Flange x x O-Ring x x Elbow, 0 deg. Male 1/ NPT to 1/ Hose Push On x x Nut, /- Serr. Flange x x 22 8 Hose, Formed 1/2" ID x x 2 8 Hose, Pump to Wheel Motor x x Tube, Filler Neck x x Engine Deck (" Wide) W/Decals x x Nut, /8- Serr Flange x x 2 88 Oil Filter x x Elbow, Deg.-/- JIC Male x Male /- O-Ring x x O-Ring x x Coupling, /8 Pipe to 1/2 Push-on x x T-Fitting, 1/2 (/-) x x Cap, /- x x 00- Screw, 1/-20 x 2.0" Round Head Phillips x x Nut, 1/-20 x x 8-0 Clamp,.8 max dia. x x 6 22 Bracket, Hydraulic Tank x x * Common hardware which should be purchased locally. All bolts are Grade plated, all other fasteners zinc plated. ** Purchase through your Hydro-Gear Distributor. 1

20 HYDRAULIC PUMP ASSEMBLY (BDP-L) 0 26 Overhaul Seal Kit S012

21 HYDRAULIC PUMP ASSEMBLY Ref. Part No. Number Description 1 HG2101 Housing Kit (Incl. Housing, Journal Bearing) 2 HG210 End Cap HG Straight Headless Pin HG Socket Head Screw HG20006 End Cap Gasket 6 HG2102 Charge Pump Kit (Incl. Charge Cover, Gerotor Assy., O-Ring) HG02 Gerotor Assembly 8 HG O-Ring HG206 Charge Relief Valve Kit HG00 Socket Head Screw HG202 Check Valve Kit (Incl. Check Plug, Spring, O-Ring, Orifice Check Valve) 12 HG2100 Bypass Valve Kit (Incl. Bypass Valve, O-Ring, Back-up Ring) 1 HG Backup Ring 1 HG00 Cylinder Block Kit 1 HG20001 Block Spring HG20001 Block Thrust Washer 1 HG2000 Roller Thrust Bearing HG20008 Swash Plate 1 HG20000 Trunnion Arm 20 HG Guide Slot 21 HG20002 Cradle Bearing 22 HG Lip Seal 2 HG Pump Shaft 2 HG2000 Ball Bearing 2 HG2000 Retaining Ring 26 HG Lip Seal 2 HG20002 Retaining Ring 28 HG2000 Spacer 2 HG2108 Shaft Kit (Incl. Pump Shaft, Ball Bearing, Retaining Ring) 0 HG210 Overhaul Seal Kit (Incl. Gasket, Trunnion Seal, Input Shaft Seal, Charge Pump O-Ring) * Common hardware should be purchased locally. All bolts Grade. 1

22 BLACK W/RED STRIPE BLACK W/RED STRIPE NEUTRAL INTERLOCK BLADE CLUTCH GROUND ENGINE DECK WIRE HARNESS - 1 & 1 HP Kawasaki PART NO. 8 BLACK E A BLACK F G H B C D INSTRUMENT PANEL HARNESS BLUE WHITE WHITE YELLOW WIRE HARNESS ADAPTER - ENGINE SWZSC21G BRAKE SWITCH KEY SWITCH MOWER ENGAGE SWITCH HANDLE WIRE HARNESS PART NO. 86 BLACK WHITE WHITE WHITE BLACK BLUE BLACK W/RED STRIPE TO OPERATOR PRESENCE SWITCH BLACK W/RED STRIPE BLACK BLACK YELLOW BLACK BLUE WHITE YELLOW A B C D E F G H TO ENGINE DECK WIRE HARNESS NEG HOURMETER POS HOURMETER SWZU-86 20

23 REPLACEMENT DECALS & INFORMATION Heavy-Duty Commercial WARNING ROTATING BLADES AND BELTS KEEP HANDS, FEET & CLOTHING CLEAR KEEP ALL GUARDS IN PLACE SHUT OFF ENGINE & DISENGAGE BLADE CLUTCH BEFORE SERVICING CLEAR AREA OF DEBRIS BEFORE MOWING USE CAUTION IN DIRECTING DISCHARGE KEEP BYSTANDERS, CHILDREN & PETS AWAY READ INSTRUCTION MANUAL BEFORE OPERATING DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING KIT, OR ENTIRE GRASS CATCHER INSTALLED DANGER SPINNING BLADE KEEP CLEAR CONTACT CAN INJURE " - 8 8" - 8 2" - 81 PARKING BRAKE CHOKE MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING PATENTS: OFF FAST, 8, 006, 1, 82, 82, 08, 88, 0, 8, 8, 86, 0, 20,, 8, 61, 6,, 826, PATENTS PENDING ON 811 SLOW 866 CAUTION BEFORE OPERATING READ OPERATORS MANUAL AND SAFETY INSTRUCTIONS CAUTION MOWER DECK ON PULL OUT TO ENGAGE ON OFF KEEP BYSTANDERS AWAY PUSH IN TO DISENGAGE MOUNT RIDING ATTACHMENT HERE WARNING FALLING HAZARD USE ONLY SCAG APPROVED RIDING ATTACHMENTS SEE OPERATOR'S MANUAL WARNING INSTALL BELT COVER BEFORE OPERATING MACHINE READ OPERATOR'S MANUAL

24 REPLACEMENT DECALS & INFORMATION TRACKING ADJUSTMENT SEE OPERATOR'S MANUAL FAST 88 SLOW 88 SEE OPERATOR'S MANUAL 812 OIL 812 FAST SPEED CONTROL " SLOW N NEUTRAL SWZU 8106 CUTTING HEIGHT 1 1-1/ /2-1/2-1/2 PARKING BRAKE OFF ON FAST SLOW